Add 3 command-line options to align branches within a fixed boundary
with segment prefixes or NOPs:
1. -malign-branch-boundary=NUM aligns branches within NUM byte boundary.
2. -malign-branch=TYPE[+TYPE...] specifies types of branches to align.
The supported branches are:
a. Conditional jump.
b. Fused conditional jump.
c. Unconditional jump.
d. Call.
e. Ret.
f. Indirect jump and call.
3. -malign-branch-prefix-size=NUM aligns branches with NUM segment
prefixes per instruction.
3 new rs_machine_dependent frag types are added:
1. BRANCH_PADDING. The variable size frag to insert NOP before branch.
2. BRANCH_PREFIX. The variable size frag to insert segment prefixes to
an instruction. The choices of prefixes are:
a. Use the existing segment prefix if there is one.
b. Use CS segment prefix in 64-bit mode.
c. In 32-bit mode, use SS segment prefix with ESP/EBP base register
and use DS segment prefix without ESP/EBP base register.
3. FUSED_JCC_PADDING. The variable size frag to insert NOP before fused
conditional jump.
The new rs_machine_dependent frags aren't inserted if the previous item
is a prefix or a constant directive, which may be used to hardcode an
instruction, since there is no clear instruction boundary. Segment
prefixes and NOP padding are disabled before relaxable TLS relocations
and tls_get_addr calls to keep TLS instruction sequence unchanged.
md_estimate_size_before_relax() and i386_generic_table_relax_frag() are
used to handled BRANCH_PADDING, BRANCH_PREFIX and FUSED_JCC_PADDING frags.
i386_generic_table_relax_frag() grows or shrinks sizes of segment prefix
and NOP to align the next branch frag:
1. First try to add segment prefixes to instructions before a branch.
2. If there is no sufficient room to add segment prefixes, NOP will be
inserted before a branch.
* config/tc-i386.c (_i386_insn): Add has_gotpc_tls_reloc.
(tls_get_addr): New.
(last_insn): New.
(align_branch_power): New.
(align_branch_kind): New.
(align_branch_bit): New.
(align_branch): New.
(MAX_FUSED_JCC_PADDING_SIZE): New.
(align_branch_prefix_size): New.
(BRANCH_PADDING): New.
(BRANCH_PREFIX): New.
(FUSED_JCC_PADDING): New.
(i386_generate_nops): Support BRANCH_PADDING and FUSED_JCC_PADDING.
(md_begin): Abort if align_branch_prefix_size <
MAX_FUSED_JCC_PADDING_SIZE.
(md_assemble): Set last_insn.
(maybe_fused_with_jcc_p): New.
(add_fused_jcc_padding_frag_p): New.
(add_branch_prefix_frag_p): New.
(add_branch_padding_frag_p): New.
(output_insn): Generate a BRANCH_PADDING, FUSED_JCC_PADDING or
BRANCH_PREFIX frag and terminate each frag to align branches.
(output_disp): Set i.has_gotpc_tls_reloc to TRUE for GOTPC and
relaxable TLS relocations.
(output_imm): Likewise.
(i386_next_non_empty_frag): New.
(i386_next_jcc_frag): New.
(i386_classify_machine_dependent_frag): New.
(i386_branch_padding_size): New.
(i386_generic_table_relax_frag): New.
(md_estimate_size_before_relax): Handle COND_JUMP_PADDING,
FUSED_JCC_PADDING and COND_JUMP_PREFIX frags.
(md_convert_frag): Handle BRANCH_PADDING, BRANCH_PREFIX and
FUSED_JCC_PADDING frags.
(OPTION_MALIGN_BRANCH_BOUNDARY): New.
(OPTION_MALIGN_BRANCH_PREFIX_SIZE): New.
(OPTION_MALIGN_BRANCH): New.
(md_longopts): Add -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_parse_option): Handle -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_show_usage): Display -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(i386_target_format): Set tls_get_addr.
(i386_cons_align): New.
* config/tc-i386.h (i386_cons_align): New.
(md_cons_align): New.
(i386_generic_table_relax_frag): New.
(md_generic_table_relax_frag): New.
(i386_tc_frag_data): Add u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
(TC_FRAG_INIT): Initialize u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
* doc/c-i386.texi: Document -malign-branch-boundary=,
-malign-branch= and -malign-branch-prefix-size=.
Add md_generic_table_relax_frag for TC_GENERIC_RELAX_TABLE targets so
that a backend can extend relax_frag beyond TC_GENERIC_RELAX_TABLE.
* write.c (md_generic_table_relax_frag): New. Defined to
relax_frag if not defined.
(relax_segment): Call md_generic_table_relax_frag instead of
relax_frag.
This started out as fixing decode_16, which used a char to index a 256
byte decodings array. When char is signed that could result in an out
of bounds array access. The rest of the patch is for consistency and
just general cleanup.
* config/obj-evax.c (crc32, encode_32, encode_16, decode_16):
Remove unnecessary prototypes.
(number_of_codings): Delete, use ARRAY_SIZE instead throughout.
(codings, decodings): Make arrays of unsigned char.
(crc32): Use unsigned variables. Delete unnecessary mask.
(encode_32, encode_16): Return unsigned char*, and make static
buffer an unsigned char array.
(decode_16): Make arg an unsigned char*. Remove useless casts.
(shorten_identifier): Use unsigned char crc_chars.
(is_truncated_identifier): Make ptr an unsigned char*.
In ("x86: extend SSE check to PCLMULQDQ, AES, and GFNI insns") I went
both a little too far and not quite far enough:
- GFNI insns also have AVX512 variants, which also shouldn't get
diagnosed,
- SSE4a insns should get diagnosed just like SSE4.x ones,
- SHA insns should get diagnosed just like PCLMULQDQ or AES ones.
This patch fixes .arch_extension behaviour.
Currently, context table for '.arch_extension' is only set while
"-march" processing, but it is not set while .arch processing,
so following code is rejected
.syntax unified
.thumb
.arch armv8.1-m.main
.arch_extension mve.fp
unless -march=armv8.1-m.main is given.
Committing on behalf of Vladimir Murzin
gas/ChangeLog:
2019-12-10 Vladimir Murzin <vladimir.murzin@arm.com>
* config/tc-arm.c (s_arm_arch): Set selected_ctx_ext_table.
* testsuite/gas/arm/mve-arch-ext.s: New.
* testsuite/gas/arm/mve-arch-ext.d: New.
This is an alias of "qword ptr", commonly used with MMX insns.
At this occasion also test (alongside the newly supported "mmword")
- "zmmword" used as expression,
- PADDB with "oword ptr" (aliasing "xmmword ptr").
Commit dc2be329b9 ("i386: Only check suffix in instruction mnemonic")
broke rejecting of these for floating point insns. Fix this by setting
the "byte" operand attribute, which will now (again) cause an error.
Furthermore the diagnostic for the "far ptr" case in general and for the
"near ptr" case in the non-float cases became "invalid instruction
suffix" instead of the intended "operand size mismatch". Fix this by
also setting the "tbyte" operand attribute (no insn template accepts
both byte and tbyte operands).
There are extremely few insns accepting "tbyte ptr" operand, so the
"tbyte" operand flag checking done by match_operand_size() is already
sufficient; the setting of the suffix has become meaningless anyway
with dc2be329b9 ("i386: Only check suffix in instruction mnemonic").
Fold the code with that setting the "byte" operand flag to force an
error (no insn at all accepts both "byte ptr" and tbyte ptr" operands,
except for AnySize ones where the two (conflicting) recorded types
don't matter (operand_size_match() doesn't call match_operand_size() in
this case).
No floating point insn accepts an "fword ptr" operand, so the "fword"
operand flag checking done by match_mem_size() is already sufficient;
the setting of the suffix has become meaningless anyway with
dc2be329b9 ("i386: Only check suffix in instruction mnemonic").
LDS et al don't accept "word ptr" operands anyway, as per their insn
templates. Hence there's no need to special case this here; the check
has become dysfunctional anyway by dc2be329b9 ("i386: Only check
suffix in instruction mnemonic").
The new pac_negate_ra_state test adds yet another failure on aarch64
ipl32 targets. This patch fixes that particular problem and a few
more that are trivial to fix.
* testsuite/gas/aarch64/bfloat16.d: Match 32-bit and 64-bit output.
* testsuite/gas/aarch64/dgh.d: Likewise.
* testsuite/gas/aarch64/f32mm.d: Likewise.
* testsuite/gas/aarch64/f64mm.d: Likewise.
* testsuite/gas/aarch64/i8mm.d: Likewise.
* testsuite/gas/aarch64/pac_ab_key.d: Likewise.
* testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise.
* testsuite/gas/aarch64/reloc-prel_g0.d: Likewise.
* testsuite/gas/aarch64/reloc-prel_g0_nc.d: Likewise.
* testsuite/gas/aarch64/reloc-prel_g1.d: Likewise.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: Likewise.
* testsuite/gas/aarch64/sve-movprfx-mm.d: Likewise.
* testsuite/gas/aarch64/sve2.d: Likewise.
This patch implements the .cfi_negate_ra_state to be consistent with
LLVM (https://reviews.llvm.org/D50136). The relevant DWARF code DW_CFA_AARCH64_negate_ra_state
is multiplexed on top of DW_CFA_GNU_window_save, as per
https://gcc.gnu.org/ml/gcc-patches/2017-08/msg00753.html
I believe this is the simplest patch implementing this and is needed to
allow users to build, for example, the Linux kernel with Armv8.3-A
pointer authentication support with Clang while using gas as the
assembler, which is a common usecase.
gas/
2019-12-06 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* dw2gencfi.c (cfi_pseudo_table): Add cfi_negate_ra_state.
* testsuite/gas/aarch64/pac_negate_ra_state.s: New file.
* testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise.
This, at the assembler level, is just a "brace" feature covering both
AES and SHA2. Hence there's no need for it to have a separate feature
flag, freeing up a bit for future re-use. Along these lines there are
also a number of dead definitions/variables in the opcode table file.
SHA2 is a prereq to SHA3, not part of it aiui. Hence disabling the
latter should not also disable the former.
In the course of adding respective tests also do away with the
duplication of crypto.d's contents in crypto-directive.d.
Since we accept these without suffix / operand size specifier, we should
also do so with one. (The fact that we unilaterally accept these, other
than far branches, rather than limiting them to Intel64 mode, will be
taken care of later on.)
Also take the opportunity and make sure "lfs <reg>, tbyte ptr <mem>"
et al get rejected outside of 64-bit mode. This became broken by
dc2be329b9 ("i386: Only check suffix in instruction mnemonic").
Furthermore cover lgdt et al in the Intel syntax handling as well, which
continued to work after said commit just by coincidence.
While dc2be329b9 ("i386: Only check suffix in instruction mnemonic")
has made the assembler accept these in the first place (they were wrongly
rejected before), the generated code was still wrong in that it lacked
an operand size override. (In 64-bit code, other than in 16- and 32-bit
ones, CALL and JMP with memory operands are all entirely unambiguous: No
operand size can have two meanings.)
Test also memory operands with operand size specifier, which was broken
prior to dc2be329b9 ("i386: Only check suffix in instruction
mnemonic"), due to the template not permitting any suffixes. Note that
this uncovered a disassembler issue, which is being fixed here as well.
While segment registers are registers, their use doesn't allow sizing
of insns without suffix / explicit operand size specifier. Prevent
PUSH and POP of segment registers from entering that path, instead
allowing them to observe the stackop_size setting just like other
PUSH/POP and alike do.
Insns permitting only GPR operands (and hence implicit sizing when
there's no suffix) don't ever have their DefaultSize attribute
inspected, so it shouldn't be there in the first place.
Additionally XBEGIN is like JMP, not CALL, and hence shouldn't be
converted to 32-bit operand size in .code16gcc mode. While the same is
true for SYSRET, it permitting more than one suffix makes it FLDENV-
like, and hence rather than dropping the attribute, for now add it to
the exclusion list to avoid it getting an operand size prefix emitted
in .code16gcc mode. (This will be dealt with later, perhaps together
with FLDENV and friends.)
The flag controlling the default DWARF CIE version to produce now
starts with the value -1. This can be modified with the command line
flag as before, but after command line flag processing, in
md_after_parse_args targets can, if the global still has the value -1,
override this value. This gives a target specific default.
If a CIE version is not select either by command line flag, or a
target specific default, then some new code in dwarf2_init now select
a global default. This remains as version 1 to match previous
behaviour.
This RISC-V has a target specific default of version provided, this
make the return column uleb128, which means we can use all DWARF
registers include CSRs.
I chose to switch to version 3 rather than version 4 as this is most
similar to the global default (version 1). Switching to version 4
adds additional columns to the CIE header.
gas/ChangeLog:
* as.c (flag_dwarf_cie_version): Change initial value to -1, and
update comment.
* config/tc-riscv.c (riscv_after_parse_args): Set
flag_dwarf_cie_version if it has not already been set.
* dwarf2dbg.c (dwarf2_init): Initialise flag_dwarf_cie_version if
needed.
* testsuite/gas/riscv/default-cie-version.d: New file.
* testsuite/gas/riscv/default-cie-version.s: New file.
ld/ChangeLog:
* testsuite/ld-elf/eh5.d: Accept version 3 DWARF CIE.
Change-Id: Ibbfe8f0979fba480bf0a359978b09d2b3055555e
In version 1 of DWARF CIE format, the return register column is just a
single byte. For targets with large numbers of DWARF registers, any
use of a register with a high number for the return column
will (currently) silently overflow giving incorrect DWARF.
This commit adds an error when the overflow occurs.
gas/ChangeLog:
* dw2gencfi.c (output_cie): Error on return column overflow.
* testsuite/gas/riscv/cie-rtn-col-1.d: New file.
* testsuite/gas/riscv/cie-rtn-col-3.d: New file.
* testsuite/gas/riscv/cie-rtn-col.s: New file.
Change-Id: I1809f739ba7771737ec012807f0260e1a3ed5e64
This commit gives DWARF register numbers to the RISC-V CSRs inline
with the RISC-V ELF specification here:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
The CSRs are defined being numbered from 4096 to 8191.
This adds support to the assembler, required in order to reference
CSRs in, for example .cfi directives.
I have then extended dwarf.c in order to support printing CSR names in
the dumped DWARF output. As the CSR name space is quite large and
only sparsely populated, I have provided a new function to perform
RISC-V DWARF register name lookup which uses a switch statement rather
than the table base approach that other architectures use.
Any CSR that does not have a known name will return a name based on
'csr%d' with the %d being replaced by the offset of the CSR from 4096.
gas/ChangeLog:
* config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Lookup CSR
names too.
* testsuite/gas/riscv/csr-dw-regnums.d: New file.
* testsuite/gas/riscv/csr-dw-regnums.s: New file.
binutils/ChangeLog:
* dwarf.c (regname_internal_riscv): New function.
(init_dwarf_regnames_riscv): Use new function.
Change-Id: I3f70bc24fa8b3c75744e6775eeeb87db70c7ecfb
We build a hash table of all register classes and numbers. The hash
key is the register name and the hash value is the class and number
encoded into a single value, which is of type 'void *'.
When we pull the values out of the hash we cast them to be a pointer
to a structure, however, we never access the fields of that structure,
we just decode the register class and number from the pointer value
itself.
This commit removes the structure and treats the encoded class and
number as a 'void *' during hash lookup.
gas/ChangeLog:
* config/tc-riscv.c (struct regname): Delete.
(hash_reg_names): Handle value as 'void *'.
Change-Id: Ie7d8f46ca3798f56f4af94395279de684f87f9cc
psb CYSNC was not finding that CSYNC was a correct spelling.
The problem was upper case version was being put in the
wrong hashtable. This fixes the problem by using the
correct hashtable.
Also adds testcases for the upper case versions.
* config/tc-aarch64.c (md_begin): Use correct
hash table for uppercase version of hint.
* testsuite/gas/aarch64/system-2.s: Extend psb case to uppercase.
* testsuite/gas/aarch64/system-2.d: Update.
Change-Id: If43f8b85cacd24840d596c3092b0345e5f212766
All symbols, sizes and relocations in this section are octets instead of
bytes. Required for DWARF debug sections as DWARF information is
organized in octets, not bytes.
bfd/
* section.c (struct bfd_section): New flag SEC_ELF_OCTETS.
* archures.c (bfd_octets_per_byte): New parameter sec.
If section is not NULL and SEC_ELF_OCTETS is set, one octet es
returned [ELF targets only].
* bfd.c (bfd_get_section_limit): Provide section parameter to
bfd_octets_per_byte.
* bfd-in2.h: regenerate.
* binary.c (binary_set_section_contents): Move call to
bfd_octets_per_byte into section loop. Provide section parameter
to bfd_octets_per_byte.
* coff-arm.c (coff_arm_reloc): Provide section parameter
to bfd_octets_per_byte.
* coff-i386.c (coff_i386_reloc): likewise.
* coff-mips.c (mips_reflo_reloc): likewise.
* coff-x86_64.c (coff_amd64_reloc): likewise.
* cofflink.c (_bfd_coff_link_input_bfd): likewise.
(_bfd_coff_reloc_link_order): likewise.
* elf.c (_bfd_elf_section_offset): likewise.
(_bfd_elf_make_section_from_shdr): likewise.
Set SEC_ELF_OCTETS for sections with names .gnu.build.attributes,
.debug*, .zdebug* and .note.gnu*.
* elf32-msp430.c (rl78_sym_diff_handler): Provide section parameter
to bfd_octets_per_byte.
* elf32-nds.c (nds32_elf_get_relocated_section_contents): likewise.
* elf32-ppc.c (ppc_elf_addr16_ha_reloc): likewise.
* elf32-pru.c (pru_elf32_do_ldi32_relocate): likewise.
* elf32-s12z.c (opru18_reloc): likewise.
* elf32-sh.c (sh_elf_reloc): likewise.
* elf32-spu.c (spu_elf_rel9): likewise.
* elf32-xtensa.c (bfd_elf_xtensa_reloc): likewise
* elf64-ppc.c (ppc64_elf_brtaken_reloc): likewise.
(ppc64_elf_addr16_ha_reloc): likewise.
(ppc64_elf_toc64_reloc): likewise.
* elflink.c (bfd_elf_final_link): likewise.
(bfd_elf_perform_complex_relocation): likewise.
(elf_fixup_link_order): likewise.
(elf_link_input_bfd): likewise.
(elf_link_sort_relocs): likewise.
(elf_reloc_link_order): likewise.
(resolve_section): likewise.
* linker.c (_bfd_generic_reloc_link_order): likewise.
(bfd_generic_define_common_symbol): likewise.
(default_data_link_order): likewise.
(default_indirect_link_order): likewise.
* srec.c (srec_set_section_contents): likewise.
(srec_write_section): likewise.
* syms.c (_bfd_stab_section_find_nearest_line): likewise.
* reloc.c (_bfd_final_link_relocate): likewise.
(bfd_generic_get_relocated_section_contents): likewise.
(bfd_install_relocation): likewise.
For section which have SEC_ELF_OCTETS set, multiply output_base
and output_offset with bfd_octets_per_byte.
(bfd_perform_relocation): likewise.
include/
* coff/ti.h (GET_SCNHDR_SIZE, PUT_SCNHDR_SIZE, GET_SCN_SCNLEN),
(PUT_SCN_SCNLEN): Adjust bfd_octets_per_byte calls.
binutils/
* objdump.c (disassemble_data): Provide section parameter to
bfd_octets_per_byte.
(dump_section): likewise
(dump_section_header): likewise. Show SEC_ELF_OCTETS flag if set.
gas/
* as.h: Define SEC_OCTETS as SEC_ELF_OCTETS if OBJ_ELF.
* dwarf2dbg.c: (dwarf2_finish): Set section flag SEC_OCTETS for
.debug_line, .debug_info, .debug_abbrev, .debug_aranges, .debug_str
and .debug_ranges sections.
* write.c (maybe_generate_build_notes): Set section flag
SEC_OCTETS for .gnu.build.attributes section.
* frags.c (frag_now_fix): Don't divide by OCTETS_PER_BYTE if
SEC_OCTETS is set.
* symbols.c (resolve_symbol_value): Likewise.
ld/
* ldexp.c (fold_name): Provide section parameter to
bfd_octets_per_byte.
* ldlang (init_opb): New argument s. Set opb_shift to 0 if
SEC_ELF_OCTETS for the current section is set.
(print_input_section): Pass current section to init_opb.
(print_data_statement,print_reloc_statement,
print_padding_statement): Likewise.
(lang_check_section_addresses): Call init_opb for each
section.
(lang_size_sections_1,lang_size_sections_1,
lang_do_assignments_1): Likewise.
(lang_process): Pass NULL to init_opb.
This patch changes the CRC extension to use the core feature bits instead
of the coproc/fpu feature bits.
CRC is not an fpu feature and it causes issues with the new fpu reset
patch (f439988037). CRC can be set using
the '.arch_extension' directive, which sets bits in the coproc bitfield. When
a '.fpu' directive is encountered, the CRC feature bit gets removed and
there is no way to set it back using '.fpu'.
With this patch, CRC will be marked in the feature core bits, which prevents
it from getting removed when setting/changing the fpu options.
gas/ChangeLog:
* config/tc-arm.c (arm_ext_crc): New.
(crc_ext_armv8): Remove.
(insns): Rename crc_ext_armv8 to arm_ext_crc.
(arm_cpus): Replace CRC_EXT_ARMV8 with ARM_EXT2_CRC.
(armv8a_ext_table, armv8r_ext_table,
arm_option_extension_value_table): Redefine the crc
extension in terms of ARM_EXT2_CRC.
* gas/testsuite/gas/arm/crc-ext.s: New.
* gas/testsuite/gas/arm/crc-ext.d: New.
include/ChangeLog:
* opcode/arm.h (ARM_EXT2_CRC): New extension feature
to replace CRC_EXT_ARMV8.
(CRC_EXT_ARMV8): Remove and mark bit as unused.
(ARM_ARCH_V8A_CRC, ARM_ARCH_V8_1A, ARM_ARCH_V8_2A,
ARM_ARCH_V8_3A, ARM_ARCH_V8_4A, ARM_ARCH_V8_5A,
ARM_ARCH_V8_6A): Redefine using ARM_EXT2_CRC instead of
CRC_EXT_ARMV8.
opcodes/ChangeLog:
* opcodes/arm-dis.c (arm_opcodes, thumb32_opcodes):
Change the coproc CRC conditions to use the extension
feature set, second word, base on ARM_EXT2_CRC.
Add a flag to control the version of CIE that is generated. By
default gas produces CIE version 1, and this continues to be the
default after this patch.
However, a user can now provide --gdwarf-cie-version=NUMBER to switch
to either version 3 or version 4 of CIE, version 2 was never released,
and so causes an error as does any number less than 1 or greater than
4.
Producing version 4 CIE requires two new fields to be added to the
CIE, an address size field, and an segment selector field. For a flat
address space the DWARF specification indicates that the segment
selector should be 0, and the address size fields just contains the
address size in bytes. For now we support 4 or 8 byte addresses, and
the segment selector is always produced as 0. At some future time we
might need to allow targets to override this.
gas/ChangeLog:
* as.c (parse_args): Parse --gdwarf-cie-version option.
(flag_dwarf_cie_version): New variable.
* as.h (flag_dwarf_cie_version): Declare.
* dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to
flag_dwarf_cie_version.
* doc/as.texi (Overview): Document --gdwarf-cie-version.
* NEWS: Likewise.
* testsuite/gas/cfi/cfi.exp: Add new tests.
* testsuite/gas/cfi/cie-version-0.d: New file.
* testsuite/gas/cfi/cie-version-1.d: New file.
* testsuite/gas/cfi/cie-version-2.d: New file.
* testsuite/gas/cfi/cie-version-3.d: New file.
* testsuite/gas/cfi/cie-version-4.d: New file.
* testsuite/gas/cfi/cie-version.s: New file.
include/ChangeLog:
* dwarf2.h (DW_CIE_VERSION): Delete.
Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
... instead of an operand one. Which operand it applies to can be
determined from other operand properties, but as it turns out the only
place it is actually used at doesn't even need further qualification.
The CMPS test case derivation from their MOVS counterparts I did in
d241b91073 ("x86/Intel: correct MOVSD and CMPSD handling") ended up
with misplaced closing parentheses in som regexps. Correct this.
We have to enable the f extension through -march or ELF attribute if we use the
FPR in .insn directive. The behavior is same as the riscv_opcodes.
2019-11-12 Nelson Chu <nelson.chu@sifive.com>
opcodes/
* riscv-opc.c (riscv_insn_types): Replace the INSN_CLASS_I with
INSN_CLASS_F and the INSN_CLASS_C with INSN_CLASS_F_AND_C if we
use the floating point register (FPR).
gas/
* testsuite/gas/riscv/insn.d: Add the f extension to -march option.
Change-Id: I4f59d04c82673ef84c56ecd2659ad8ce164dd626
This patch enables a few instructions for Armv8.1-M MVE. Currently VLDM,
VSTM, VSTR, VLDR, VPUSH and VPOP are enabled only when the Armv8-M
Floating-point Extension is enabled. According to the ARMv8.1-M ARM,
section A.1.4.2[1], they can be enabled by having "Armv8-M Floating-point
Extension and/or Armv8.1-M MVE".
[1]https://developer.arm.com/docs/ddi0553/bh/armv81-m-architecture-reference-manual
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (do_vfp_nsyn_push): Move in order to enable it for
both fpu_vfp_ext_v1xd and mve_ext and add call to the aliased vstm
instruction for mve_ext.
(do_vfp_nsyn_pop): Move in order to enable it for both
fpu_vfp_ext_v1xd and mve_ext and add call to the aliased vldm
instruction for mve_ext.
(do_neon_ldm_stm): Add fpu_vfp_ext_v1 and mve_ext checks.
(insns): Enable vldm, vldmia, vldmdb, vstm, vstmia, vstmdb, vpop,
vpush, and fldd, fstd, flds, fsts for arm_ext_v6t2 instead
of fpu_vfp_ext_v1xd.
* testsuite/gas/arm/v8_1m-mve.s: New.
* testsuite/gas/arm/v8_1m-mve.d: New.
This patch updates the decoding of the VMOV and VMVN instructions which depend on cmode.
Previously VMOV and VMVN with cmode 1101 were not allowed.
The cmode changes also required updating of the MVE conflict checking.
Now instructions with opcodes 0xef800d50 and 0xef800e70 correctly get decoded as VMOV
and VMVN, respectively.
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/arm-dis.c (mve_opcodes): Enable VMOV imm to vec with
cmode 1101.
(is_mve_encoding_conflict): Update cmode conflict checks for
MVE_VMVN_IMM.
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* gas/config/tc-arm.c (do_neon_mvn): Allow mve_ext cmode=0xd.
* testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.s: New test.
* testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.d: Likewise.
EsSeg (a per-operand bit) is used with IsString (a per-insn attribute)
only. Extend the attribute to 2 bits, thus allowing to encode
- not a string insn,
- string insn with neither operand requiring use of %es:,
- string insn with 1st operand requiring use of %es:,
- string insn with 2nd operand requiring use of %es:,
which covers all possible cases, allowing to drop EsSeg.
The (transient) need to comment out the OTUnused #define did uncover an
oversight in the earlier OTMax -> OTNum conversion, which is being taken
care of here.
Drop the remaining instances left in place by commit c3949f432f ("x86:
limit ImmExt abuse), now that we have a way to specify specific GPRs.
Take the opportunity and also introduce proper 16-bit forms of
applicable SVME insns as well as 1-operand forms of CLZERO.
Special register "class" instances can't be combined with one another
(neither in templates nor in register entries), and hence it is not a
good use of resources (memory as well as execution time) to represent
them as individual bits of a bit field.
Furthermore the generalization becoming possible will allow
improvements to the handling of insns accepting only individual
registers as their operands.
We should check suffix in instruction mnemonic when matching instruction.
In Intel syntax, normally we check for memory operand size. But the same
mnemonic with 2 different encodings can have the same memory operand
size and i.suffix is set to LONG_DOUBLE_MNEM_SUFFIX from memory operand
size in Intel syntax to distinguish them. When there is no suffix in
mnemonic, we check LONG_DOUBLE_MNEM_SUFFIX in i.suffix for mnemonic
suffix.
gas/
PR gas/25167
* config/tc-i386.c (match_template): Don't check instruction
suffix set from operand.
* testsuite/gas/i386/code16.d: New file.
* testsuite/gas/i386/code16.s: Likewise.
* testsuite/gas/i386/i386.exp: Run code16.
* testsuite/gas/i386/x86-64-branch-4.l: Updated.
opcodes/
PR gas/25167
* i386-opc.tbl: Remove IgnoreSize from cmpsd and movsd.
* i386-tbl.h: Regenerated.
Many operand types, in particular the various kinds of registers, can't
be combined with one another (neither in templates nor in register
entries), and hence it is not a good use of resources (memory as well as
execution time) to represent them as individual bits of a bit field.
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
In this last patch, the new Data Gathering Hint mnemonic is introduced.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* testsuite/gas/aarch64/dgh.s: New test.
* testsuite/gas/aarch64/dgh.d: New test.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/aarch64-tbl.h (V8_6_INSN): New macro for v8.6 instructions.
(aarch64_opcode_table): Add data gathering hint mnemonic.
* opcodes/aarch64-dis-2.c: Account for new instruction.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the arm backend.
The following Matrix Multiply instructions are added: vummla, vsmmla,
vusmmla, vusdot, vsudot[1].
[1]https://developer.arm.com/docs/ddi0597/latest/simd-and-floating-point-instructions-alphabetic-order
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (arm_ext_i8mm): New feature set.
(do_vusdot): New.
(do_vsudot): New.
(do_vsmmla): New.
(do_vummla): New.
(insns): Add vsmmla, vummla, vusmmla, vusdot, vsudot mnemonics.
(armv86a_ext_table): Add i8mm extension.
(arm_extensions): Move bf16 extension to context sensitive table.
(armv82a_ext_table, armv84a_ext_table, armv85a_ext_table):
Move bf16 extension to context sensitive table.
(armv86a_ext_table): Add i8mm extension.
* doc/c-arm.texi: Document i8mm extension.
* testsuite/gas/arm/i8mm.s: New test.
* testsuite/gas/arm/i8mm.d: New test.
* testsuite/gas/arm/bfloat17-cmdline-bad-3.d: Update test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/arm.h (ARM_EXT2_I8MM): New feature macro.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* arm-dis.c (neon_opcodes): Add i8mm SIMD instructions.
Regression tested on arm-none-eabi.
Is this ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat' directive for the AArch64 backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function in order
to encode the slightly
different bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on aarch64-none-elf and aarch64-none-linux-gnu
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-29 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-29 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-aarch64.c (md_atof): Add encoding for the bfloat16 format.
* testsuite/gas/aarch64/bfloat16-directive-le.d: New test.
* testsuite/gas/aarch64/bfloat16-directive-be.d: New test.
* testsuite/gas/aarch64/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat16' directive for the Arm backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function (included
in the previous patch) in order to encode the slightly different
bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on arm-none-eabi and arm-none-linux-gnueabihf
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-arm.c (md_atof): Add encoding for bfloat16
* testsuite/gas/arm/bfloat16-directive-le.d: New test.
* testsuite/gas/arm/bfloat16-directive-be.d: New test.
* testsuite/gas/arm/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions).
This patch contains some general refactoring of the atof_ieee
function, exposing a function that allows a higher level of control
over the format of IEEE-like floating point numbers.
This has been done in order to be able to add a directive for assembling
floating point literals in the bfloat16 format in the following patches.
Committed on behalf of Mihail Ionescu.
Tested on arm-none-eabi, arm-none-linux-gnueabihf, aarch64-none-elf
and aarch64-none-linux-gnuwith no issues.
gas/ChangeLog:
2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com>
* as.h (atof_ieee_detail): Add prototype for atof_ieee_detail function.
(atof_ieee): Move some code into the atof_ieee_detail function.
(atof_ieee_detail): Add function that provides a higher level of control over generating
IEEE-like numbers.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces BFloat16 instructions to the arm backend.
The following BFloat16 instructions are added: vdot, vfma{l/t},
vmmla, vfmal{t/b}, vcvt, vcvt{t/b}.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_archs): Add armv8.6-a option.
(cpu_arch_ver): Add TAG_CPU_ARCH_V8 tag for Armv8.6-a.
* doc/c-arm.texi (-march): New armv8.6-a arch.
* config/tc-arm.c (arm_ext_bf16): New feature set.
(enum neon_el_type): Add NT_bfloat value.
(B_MNEM_vfmat, B_MNEM_vfmab): New bfloat16 encoder
helpers.
(BAD_BF16): New message.
(parse_neon_type): Add bf16 type specifier.
(enum neon_type_mask): Add N_BF16 type.
(type_chk_of_el_type): Account for NT_bfloat.
(el_type_of_type_chk): Account for N_BF16.
(neon_three_args): Split out from neon_three_same.
(neon_three_same): Part split out into neon_three_args.
(CVT_FLAVOUR_VAR): Add bf16_f32 cvt flavour.
(do_neon_cvt_1): Account for vcvt.bf16.f32.
(do_bfloat_vmla): New.
(do_mve_vfma): New function to deal with the mnemonic clash between the BF16
vfmat and the MVE vfma in a VPT block with a 't'rue condition.
(do_neon_cvttb_1): Account for vcvt{t,b}.bf16.f32.
(do_vdot): New
(do_vmmla): New
(insns): Add vdot and vmmla mnemonics.
(arm_extensions): Add "bf16" extension.
* doc/c-arm.texi: Document "bf16" extension.
* testsuite/gas/arm/attr-march-armv8_6-a.d: New test.
* testsuite/gas/arm/bfloat16-bad.d: New test.
* testsuite/gas/arm/bfloat16-bad.l: New test.
* testsuite/gas/arm/bfloat16-bad.s: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-2.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-3.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad.d: New test.
* testsuite/gas/arm/bfloat16-neon.s: New test.
* testsuite/gas/arm/bfloat16-non-neon.s: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.d: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.l: New test.
* testsuite/gas/arm/bfloat16-thumb.d: New test.
* testsuite/gas/arm/bfloat16-vfp.d: New test.
* testsuite/gas/arm/bfloat16.d: New test.
* testsuite/gas/arm/bfloat16.s: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_V8_6A, ARM_AEXT2_V8_6A,
ARM_ARCH_V8_6A): New.
* opcode/arm.h (ARM_EXT2_BF16): New feature macro.
(ARM_AEXT2_V8_6A): Include above macro in definition.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (select_arm_features): Update bfd_march_arm_8 with
Armv8.6-A.
(coprocessor_opcodes): Add bfloat16 vcvt{t,b}.
(neon_opcodes): Add bfloat SIMD instructions.
(print_insn_coprocessor): Add new control character %b to print
condition code without checking cp_num.
(print_insn_neon): Account for BFloat16 instructions that have no
special top-byte handling.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
This first patch adds the Armv8.6-A flag to binutils.
No instructions are behind it at the moment.
Commited on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (armv8.6-a): New arch.
* doc/c-aarch64.texi (armv8.6-a): Document new arch.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_6): New.
(AARCH64_ARCH_V8_6): New.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h (ARMV8_6): New macro.
Is it ok for trunk?
Regards,
Mihail
As the comments (here: almost, in the opcode table: fully) correctly
state - all register operands except MONITOR's address one are fixed
at 32 bit size. Don't print 64-bit registers there.
Also adjust x86-64-suffix.d's name such that it wouldn't be identical to
x86-64-rep-suffix.d's, but instead resemble that of its sibling
x86-64-suffix-intel.d.
Alter the sequence of conditions evaluated, without affecting the
overall result. This is going to help subsequent changes (and as a nice
side effect also slightly reduces overall indentation depth).
While doing this take the liberty of simplifying the calculation of the
operand index of the register operand in ShortForm handling.
If the extension is not found in the context sensitive table, the legacy
tables are still checked as a fallback. This is particularly useful for
Armv8.1-M as it enables the use of '.arch_extension' with the 'mve' and
'mve.fp' extensions which are not part of the legacy table.
* config/tc-arm.c (selected_ctx_ext_table) New static variable.
(arm_parse_arch): Set context sensitive extension table based on the
chosen base architecture.
(s_arm_arch_extension): Change to lookup extensions in the new context
sensitive tables.
* gas/testsuite/gas/arm/mve-ext.s: New.
* gas/testsuite/gas/arm/mve-ext.d: New.
* gas/testsuite/gas/arm/mvefp-ext.s: New.
* gas/testsuite/gas/arm/mvefp-ext.d: New.
This is a shorthand for the immediate argument being 0, as described here:
https://developer.arm.com/docs/ddi0596/latest/base-instructions-alphabetic-order/ldraa-ldrab-load-register-with-pointer-authentication
This is because the instructions still have a use with an immediate
argument of 0, unlike loads without the PAC functionality. Currently,
the mnemonics are
LDRAA Xt, [Xn, #<simm10>]!
LDRAB Xt, [Xn, #<simm10>]!
After this patch they become
LDRAA Xt, [Xn {, #<simm10>}]!
LDRAB Xt, [Xn {, #<simm10>}]!
gas * config/tc-aarch64.c (parse_address_main): Accept the omission of
the immediate argument for ldraa and ldrab as a shorthand for the
immediate being 0.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.d: New test.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.s: New test.
* testsuite/gas/aarch64/illegal-ldraa.s: Modified to accept the
writeback form with no offset.
* testsuite/gas/aarch64/illegal-ldraa.s: Removed missing offset
error.
opcodes * aarch64-opc.c (print_immediate_offset_address): Don't print the
immediate for the writeback form of ldraa/ldrab if it is 0.
* aarch64-tbl.h: Updated the documentation for ADDR_SIMM10.
* aarch64-opc-2.c: Regenerated.
Prior to changing the logic in the assembler install tests to make sure
the present defaulting of operand sizes won't get broken. There are a
few anomalies pointed out by this:
- arithmetic insns (add, sub, etc) allow defaulting when their immediate
fits in (signed) 8 bits, but they fail to assemble with larger values,
- mov, other than arithmetic insns, doesn't allow any defaulting,
- movsx/movzx default to byte sources (in AT&T mode), and their special
casing needs to be adjusted first
- bt and friends allow defaulting, while shl and friends don't,
- ambiguous AVX and AVX512 insns don't allow defaulting.
This should ultimately all become consistent (perhaps with the exception
some of the SIMD insns); respective tests will be added to the test
cases here as the issues get addressed.
The flag is used to indicate opcodes which can be switched between byte
and word/dword/qword forms (in a "canonical" way). Obviously it's quite
odd then to see it on insns not allowing for byte operands in the first
place. As a result the opcode bytes need to be adjusted accordingly,
which includes comparisons done in optimize_encoding().
To make re-introduction of such issues less likely have i386-gen
diagnose it (in a generally non-fatal way for now).
If we happen to get the fixed and variable parts of the advance_loc
in different frags, bad things happen when subtracting one from a
fr_fix of zero.
PR 25125
* dw2gencfi.c (output_cfi_insn): Don't allow DW_CFA_advance_loc4
to be placed in a different frag to the rs_cfa.
These can be generated when multiple cfi directives are emitted for an
instruction and the insn frag is closed off between directives, as
happens when listings are enabled. No doubt the advance_loc of zero
could be avoided by backtracking over frags in dw2gencfi.c before
calling cfi_add_advance_loc, but that seems like more work than
cleaning up afterwards as this patch does.
Noticed when looking at the testcase in PR25125.
PR 25125
* dw2gencfi.c (output_cfi_insn): Don't output DW_CFA_advance_loc+0.
* ehopt.c (eh_frame_estimate_size_before_relax): Return -1 for
an advance_loc of zero.
(eh_frame_relax_frag): Translate fr_subtype of 7 to size -1.
(eh_frame_convert_frag): Handle fr_subtype of 7. Abort on
unexpected fr_subtype.
The patch I made for PR12049 didn't test for a "negative" branch
properly. "if (target < address)" ought to have been
"if (target < address + fragP->fr_fix)". Rather than making that
change, this patch adds fragP->fr_fix into address earlier. The patch
also avoids running into a bad interaction with the m68k
md_prepare_relax_scan by returning zero growth immediately, since the
adjusted target expression would result in a zero "aim".
PR gas/25125
PR gas/12049
* write.c (relax_frag): Correct calculation of delta for
positive branches where "stretch" would make the branch
negative. Return zero immediately in that case. Correct
TC_PCREL_ADJUST comment.
Not much to see here, just reduce the number of calls to S_GET_VALUE
and symbol_symbolS in the comparison functions.
* config/tc-xtensa.c (xg_order_trampoline_chain_entry): Don't
call S_GET_VALUE multiple times for a symbol. Rearrange code
so it is obvious what is the primary sort key.
(xg_order_trampoline_chain): Similarly.
Also fixes m68hc1x printf arguments which would have bombed when
compiling on a 32-bit host with --enable-64-bit-bfd.
bfd/
PR 24955
* elf32-arm.c (set_cmse_veneer_addr_from_implib): Use bfd_malloc
rather than xmalloc.
* elf32-m68hc1x.c (reloc_warning): New function.
(elf32_m68hc11_relocate_section): Use it here. Cast bfd_vma values
corresponding to %lx in format strings.
* elf32-nds32.c (nds32_insertion_sort): Use a stack temporary.
gas/
* config/tc-nds32.c (nds32_set_section_relocs): Use relocs and n
parameters rather than equivalent sec->orelocation and
sec->reloc_count. Don't sort for n <= 1. Tidy.
PR 25041
opcodes * avr-dis.c (avr_operand): Fix construction of address for lds/sts
instructions.
gas * testsuite/gas/avr/pr25041.s: New test.
* testsuite/gas/avr/pr25041.d: New test driver.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
The fix for PR12848 introduced an off by one error in the mask, this corrected
the negative overflows but not the positive overflows. As a result the
conditional branch instructions accepted a too wide positive immediate which
resulted in it corrupting the instruction during encoding.
The relocation I believe has been incorrectly named, to be consistent with the
other relocations it should have been named BRANCH21 which is why the masks for
it are confusing.
I've replaced the masks with a function out_of_range_p which should make it
harder to make such mistakes.
The mask for BL/BLX on Armv6t+ is also wrong, the extended range is 25-bits
and so the mask should be checking for 24-bits for positive overflow.
gas/ChangeLog:
PR gas/24991
* config/tc-arm.c (out_of_range_p): New.
(md_apply_fix): Use it in BFD_RELOC_THUMB_PCREL_BRANCH9,
BFD_RELOC_THUMB_PCREL_BRANCH12, BFD_RELOC_THUMB_PCREL_BRANCH20,
BFD_RELOC_THUMB_PCREL_BRANCH23, BFD_RELOC_THUMB_PCREL_BRANCH25
* testsuite/gas/arm/pr24991.d: New test.
* testsuite/gas/arm/pr24991.l: New test.
* testsuite/gas/arm/pr24991.s: New test.
bfd/
* bfd-in.h: Move arm declaraions..
* cpu-arm.h: ..to here, new file..
* coff-arm.h: ..and here, new file..
* elf32-arm.h: ..and here, new file.
* cpu-arm.c: Include cpu-arm.h.
* coff-arm.c: Include cpu-arm.h and coff-arm.h.
* elf32-arm.c: Include cpu-arm.h and elf32-arm.h.
* pe-arm.c: Move function rename defines later.
* pe-arm-wince.c: Likewise and include sysdep.h and bfd.h early.
* bfd-in2.h: Regenerate.
gas/
* config/tc-arm.c: Include cpu-arm.h.
ld/
* emultempl/armelf.em: Include elf32-arm.h.
* emultempl/pe.em: Move func defines later and include coff-arm.h.
This one exposed a bug in tic6x gas, found with inline function
parameter type checking. struct bfd_section and struct bfd_symbol
both have a flags field, so bfd_is_com_section (symbol) compiled OK
when bfd_is_com_section was a macro but didn't special case common
symbols.
bfd/
* bfd-in.h (bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, discarded_section),
(bfd_get_section_limit_octets, bfd_get_section_limit): Delete macros.
* bfd.c (bfd_get_section_limit_octets, bfd_get_section_limit),
(bfd_section_list_remove, bfd_section_list_append),
(bfd_section_list_prepend, bfd_section_list_insert_after),
(bfd_section_list_insert_before, bfd_section_removed_from_list):
New inline functions.
* section.c (bfd_is_und_section, bfd_is_abs_section),
(bfd_is_ind_section, bfd_is_const_section, bfd_section_list_remove),
(bfd_section_list_append, bfd_section_list_prepend),
(bfd_section_list_insert_after, bfd_section_list_insert_before),
(bfd_section_removed_from_list): Delete macros.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, bfd_is_und_section),
(bfd_is_abs_section, bfd_is_ind_section, bfd_is_const_section),
(discarded_section): New inline functions.
* bfd-in2.h: Regenerate.
gas/
* config/tc-tic6x.c (tc_gen_reloc): Correct common symbol check.
ld/
* emultempl/xtensaelf.em (xtensa_get_section_deps): Comment.
Use bfd_section_userdata.
(xtensa_set_section_deps): Use bfd_set_section_userdata.
* ldlang.c (lang_output_section_get): Use bfd_section_userdata.
(sort_def_symbol): Likewise, and bfd_set_section_userdata.
(init_os): Use bfd_set_section_userdata.
(print_all_symbols): Use bfd_section_userdata.
* ldlang.h (get_userdata): Delete.
Commit 21df382b91 ("x86: fold SReg{2,3}") went too far: Folding 64-bit
PUSH/POP templates into non-64-bit ones isn't correct, due to the
different operand widths, and hence suffixes permitted. Restore the
separate templates.
Add tests of PUSH/POP with q suffix and %fs/%gs operands to the
testsuite. While doing so also add PUSHF/POPF ones _without_ suffix.
These NEWS entries had been missed when the instructions were added.
gas/ChangeLog:
2019-09-19 Matthew Malcomson <matthew.malcomson@arm.com>
* NEWS: Add SVE2 and TME entries.
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
Generalize opcode arch dependencies so that we can support the
overlapping B extension Zb* subsets.
2019-09-17 Maxim Blinov <maxim.blinov@embecosm.com>
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle
insn_class enum rather than subset char string.
(riscv_ip): Update call to riscv_multi_subset_supports.
include/
* opcode/riscv.h (riscv_insn_class): New enum.
* opcode/riscv.h (struct riscv_opcode): Change
subset field to insn_class field.
opcodes/
* riscv-opc.c (riscv_opcodes): Change subset field
to insn_class field for all instructions.
(riscv_insn_types): Likewise.
gas * config/tc-arm.c (parse_neon_mov): Add check to accept vector
register to both the arguments in VMOV instruction.
* testsuite/gas/arm/mve-vmov-1.d: Modify.
* testsuite/gas/arm/mve-vmov-1.s: Likewise.
* testsuite/gas/arm/mve-vorr.d: Likewise.
opcodes * arm-dis.c (mve_opcodes): Add entry for MVE_VMOV_VEC_TO_VEC.
(is_mve_undefined): Add case for MVE_VMOV_VEC_TO_VEC.
(print_insn_mve): Add condition to check Qm==Qn of VORR instruction.
This patch adds support for following CPUs:
Cortex-M35P, Cortex-A77, Cortex-A76AE.
Related specifications can be found at https://developer.arm.com/ip-products/processors.
gas/ChangeLog:
* config/tc-arm.c: New entries for Cortex-M35P, Cortex-A77,
and Cortex-A76AE.
* doc/c-arm.texi: Document new processors.
* testsuite/gas/arm/cpu-cortex-a76ae.d: New test.
* testsuite/gas/arm/cpu-cortex-a77.d: New test.
* testsuite/gas/arm/cpu-cortex-m35p.d: New test.
bfd/ChangeLog:
* cpu-arm.c: New entries for Cortex-M35P, Cortex-A77, Cortex-A76AE.
* atof-generic.c (atof_generic): Do not ignore leading zeros if
they appear after a decimal point.
* testsuite/gas/all/float.s: Extend test to include a number with
a leading decimal point followed by several zeroes.
* testsuite/gas/i386/fp.s: Likewise.
* testsuite/gas/i386/fp.d: Update expected output.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 0.5
.float16 10.2, NaN, 452.09
The floats will always be encoded using the binary16 format as described in the
IEEE 754-2008 standard. There is no need to support Arm's alternative half-precision
format since AArch64 only supports the IEEE format.
gas * config/tc-aarch64.c: Add float16 directive and add "Hh" to
acceptable float characters.
* doc/c-aarch64.texi: Documentation for float16 directive.
* testsuite/gas/aarch64/float16-be.d: New test.
* testsuite/gas/aarch64/float16-le.d: New test.
* testsuite/gas/aarch64/float16.s: New test.
* NEWS: Add NEWS entry.
Related specifications can be found at
https://developer.arm.com/ip-products/processors.
gas * NEWS: Mention the Arm and AArch64 new processors.
* config/tc-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
* doc/c-aarch64.texi: Document new CPUs.
* testsuite/gas/aarch64/cpu-cortex-a34.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a76ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a77.d: New test.
* testsuite/gas/aarch64/nop-asm.s: New test.
bfd * cpu-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
gas/
* config/tc-mips.c (mips_move_labels): Retain ISA mode bit
when moving labels in text segments.
(mips_align): Indicate text mode when aligning labels in
text segments.
* gas/testsuite/gas/mips/insn-isa-mode.d: New test.
* gas/testsuite/gas/mips/insn-isa-mode.s: New test source.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
The tests were failing due to md_atof trying to do word-wise endian
switching on the float16 (for little-endian targets sometimes
multi word values have their word order changed).
However since a float16 is only 1 word wide, it would end up writing
incorrect data, as you cannot switch the word order of just one word.
* config/tc-arm.c (md_atof): Add precision check. Formatting.
This is a change to the first published specifications [1][a] but since there is no hardware
out there that uses the old instructions we do not want to support the old variant.
This changes are done based on the latest published specifications [1][b].
[1] https://developer.arm.com/architectures/cpu-architecture/m-profile/docs/ddi0553/latest/armv81-m-architecture-reference-manual
[a] version bf
[b] version bh
gas * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64.
(po_imm1_or_imm2_or_fail): Marco to check the immediate is either of
48 or 64.
(parse_operands): Add case OP_I48_I64.
(do_mve_scalar_shift1): Add function to encode the MVE shift
instructions with 4 arguments.
* testsuite/gas/arm/mve-shift-bad.l: Modify.
* testsuite/gas/arm/mve-shift-bad.s: Likewise.
* testsuite/gas/arm/mve-shift.d: Likewise.
* testsuite/gas/arm/mve-shift.s: Likewise.
opcodes * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for
cases MVE_SQRSHRL and MVE_UQRSHLL.
(print_insn_mve): Add case for specifier 'k' to check
specific bit of the instruction.
Half precision floating point numbers will be encoded using the IEEE 754
half precision floating point format - 16 bits in total, 1 for sign, 5
for exponent and 10 bits of mantissa.
This patch implements the float16 directive for both the IEEE 754 format
and the Arm alternative format for the Arm backend.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 12.0
.float16 0.23, 433.1, 0.06
The Arm alternative format is almost identical to the IEEE 754 format,
except that it doesn't encode for NaNs or Infinity (instead an exponent
of 0x1F represents a normalized number in the range 65536 to 131008).
The alternative format is documented in the reference manual:
https://static.docs.arm.com/ddi0487/db/DDI0487D_b_armv8_arm.pdf?_ga=2.72318806.49764181.1561632697-999473562.1560847439
Which format is used is controlled by the .float16_format <format>
directive, where if <format> = ieee, then use the IEEE 754
half-precision format else if <format> = alternative, then use the
Arm alternative format
Or the format can be set on the command line via the -mfp16-format
option that has a similar syntax. -mfp16-format=<ieee|alternative>.
This also fixes the format and it cannot be changed by any directives.
Once the format has been set (either by the command line option or a directive) it cannot be changed,
and any attempts to change it (i.e. with the float16_format directive) will result in a warning and the
line being ignored.
For ELF targets the appropriate EABI attribute will be written out at the end of assembling
if the format has been explicitly specified. If no format has been explicitly specified then no
EABI attributes will be written.
If the format is not explicitly specified then any float16 directives are encoding using the IEEE 754-2008
format by default until the format is fixed or changed with the float16_format directive.
gas * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings.
(md_atof): Set precision for float16 type.
(arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative
format.
(set_fp16_format): Parse a float16_format directive.
(arm_parse_fp16_opt): Parse the fp16-format command line option.
(aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute.
* config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to
arm_is_largest_exponent_ok.
(arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function.
* doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format=
* testsuite/gas/arm/float16-bad.d: New test.
* testsuite/gas/arm/float16-bad.l: New test.
* testsuite/gas/arm/float16-bad.s: New test.
* testsuite/gas/arm/float16-be.d: New test.
* testsuite/gas/arm/float16-format-bad.d: New test.
* testsuite/gas/arm/float16-format-bad.l: New test.
* testsuite/gas/arm/float16-format-bad.s: New test.
* testsuite/gas/arm/float16-format-opt-bad.d: New test.
* testsuite/gas/arm/float16-format-opt-bad.l: New test.
* testsuite/gas/arm/float16-le.d: New test.
* testsuite/gas/arm/float16.s: New test.
* testsuite/gas/arm/float16-eabi-alternative-format.d: New test.
* testsuite/gas/arm/float16-eabi-ieee-format.d: New test.
* testsuite/gas/arm/float16-eabi-no-format.d: New test.
* testsuite/gas/arm/float16-eabi.s: New test.
* config/atof-ieee.c (H_PRECISION): Macro for precision of float16
type.
(atof_ieee): Set precision and exponent bits for encoding float16
types.
(gen_to_words): NaN and Infinity encoding for float16.
(ieee_md_atof): Set precision for encoding float16 type.
In order to be able to add/remove insns to/from the middle of these
tests, generalize the patterns for the symbol reference comments of RIP-
relative operands.
Previously GAS would accept .u32, .u16 and .u8 suffixes to the VQ(R)DMLAH and VQ(R)DMLASH
instructions, however the Armv8.1-M Mainline specification states that these functions only
have signed variations (.s32, .s16 and .s8 suffixes).
This is documented here:
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf?_ga=2.143079093.1892401233.1563295591-999473562.1560847439#page=1183
gas * config/tc-arm.c (do_mve_vqdmlah): Use N_S_32 macro.
(do_neon_qrdmlah): Use N_S_32 macro.
* testsuite/gas/arm/mve-vqdmlah-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlah.s: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash.s: Remove unsigned instruction tests.
opcodes * arm-dis.c: Only accept signed variants of VQ(R)DMLAH and VQ(R)DMLASH
instructions.
New instruction are added, and some of them are overlapping. Update
disassembler to correctly recognize them. Introduce nps400 option.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (skip_this_opcode): Check also for 0x07 major opcodes,
and MPY class instructions.
(parse_option): Add nps400 option.
(print_arc_disassembler_options): Add nps400 info.
gas/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/nps400-6.d: Update test.
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it
should have required ELFOSABI_GNU since these flags are already in use
by other OSes. HPUX SHF_HP_TLS in fact has the same value. That
means no place in binutils should test SHF_GNU_MBIND without first
checking OSABI, and SHF_GNU_MBIND should not be set without also
setting OSABI. At least, that's the ideal, but the patch accepts
SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always
set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't
proper without a non-zero OSABI, readelf will display the flag as
LOOS+0 if OSABI isn't set.
The clash with SHF_HP_TLS means that hppa64-linux either has that flag
on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux
users, if there are any, may have noticed that GNU ld since 2017
mysteriously aligned their .tbss sections to a 4k boundary. That was
one consequence of SHF_HP_TLS being blindly interpreted as
SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and
the linux kernel don't care about SHF_HP_TLS I took that flag out of
.tbss for hppa64-linux.
bfd/
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind.
(get_program_header_size): Formatting. Only test SH_GNU_MBIND
when elf_gnu_osabi_mbind is set.
(_bfd_elf_map_sections_to_segments): Likewise.
(_bfd_elf_init_private_section_data): Likewise.
(_bfd_elf_final_write_processing): Update comment.
* elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry.
(elf_backend_special_sections): Define without .tbss for linux.
binutils/
* readelf.c (get_parisc_segment_type): Split off hpux entries..
(get_ia64_segment_type): ..and these..
(get_hpux_segment_type): ..to here.
(get_segment_type): Condition GNU_MBIND on osabi. Use
get_hpux_segment_type.
(get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
(get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
gas/
* config/obj-elf.c (obj_elf_change_section): Don't emit a fatal
error for non-SHF_ALLOC SHF_GNU_MBIND here.
(obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new
gnu_attr param.
(obj_elf_section): Adjust obj_elf_parse_section_letters call.
Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr.
Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi.
(obj_elf_type): Set elf_osabi for ifunc.
* testsuite/gas/elf/section12a.d: xfail msp430 and hpux.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.l: Adjust expected error.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition
SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
The instructions that this change apply to are:
VQDMLADH, VQRDMLADH, VQDMLSDH, VQRDMLSDH
The updated documentation is here: https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf
Fixed this by removing the check for this warning from GAS as well as opcodes.
Added testcases to test that the warning is not generated for the instructions that have a 32-bit element size
and the same source and destination operand. Also fixed tests that would previously check for this warning.
gas * config/tc-arm.c (do_mve_vqdmladh): Remove check for UNPREDICTABLE.
* testsuite/gas/arm/mve-vqdmladh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmladh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmladh.d: New tests.
* testsuite/gas/arm/mve-vqdmladh.s: New tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh.d: New tests.
* testsuite/gas/arm/mve-vqdmlsdh.s: New tests.
opcodes * arm-dis.c (is_mve_unpredictable): Stop marking some MVE
instructions as UNPREDICTABLE.
This patch changes the eBPF CPU description to prefer the register
names %r0 and %r6 instead of %a and %ctx when disassembling. This
matches better with the current practice, vs. cBPF.
It also updates the GAS tests in order to reflect this change.
Tested in a x86_64 host.
cpu/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (h-gpr): when disassembling, use %r0 and %r6 instead of
%a and %ctx.
opcodes/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerated.
gas/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.d: Use %r6 instead of %ctx.
* testsuite/gas/bpf/lddw-be.d: Likewise.
* testsuite/gas/bpf/lddw.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (pe_lcomm_internal): Adapted from tc-i386.c.
(pe_lcomm): Likewise.
(md_pseudo_table): Use pe_lcomm to implement .lcomm.
After some discussion, we've decided to rename the +bitperm feature
flag to +sve2-bitperm, so that it's consistent with the other SVE2
feature flags. The associated internal macros already used
"SVE2_BITPERM", so only the feature flag itself needs to change.
2019-07-19 Richard Sandiford <richard.sandiford@arm.com>
gas/
* doc/c-aarch64.texi: Remame the +bitperm extension to +sve2-bitperm.
* config/tc-aarch64.c (aarch64_features): Likewise.
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sve2-sha3.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2-sm4.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2.d: Likewise.
* testsuite/gas/aarch64/sve2.d: Likewise.
This patch supports using pcrel instructions in TLS code sequences. A
number of new relocations are needed, gas operand modifiers to
generate those relocations, and new TLS optimisation. For
optimisation it turns out that the new pcrel GD and LD sequences can
be distinguished from the non-pcrel GD and LD sequences by there being
different relocations on the new sequence. The final "add ra,rb,13"
on IE sequences similarly needs a new relocation, or as I chose, a
modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points
one byte into the "add" instruction rather than being on the
instruction boundary.
GD:
pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34
bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC
edited to IE
pld 3,z@got@tprel@pcrel
add 3,3,13
edited to LE
paddi 3,13,z@tprel
nop
LD:
pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34
bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC
..
paddi 9,3,z2@dtprel
pld 10,z3@got@dtprel@pcrel
add 10,10,3
edited to LE
paddi 3,13,0x1000
nop
IE:
pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34
add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1
ldx 4,9,z@tls@pcrel
lwax 5,9,z@tls@pcrel
stdx 5,9,z@tls@pcrel
edited to LE
paddi 9,13,z@tprel
nop
ld 4,0(9)
lwa 5,0(9)
std 5,0(9)
LE:
paddi 10,13,z@tprel
include/
* elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34),
(R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34),
(R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define.
(IS_PPC64_TLS_RELOC): Include new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34),
(BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34),
(BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34),
(BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs.
* elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs.
(ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs.
(must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64.
(ppc64_elf_check_relocs): Support pcrel tls relocs.
(ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel",
"got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel".
(fixup_size, md_assemble): Handle pcrel tls relocs.
(ppc_force_relocation, ppc_fix_adjustable): Likewise.
(md_apply_fix, tc_gen_reloc): Likewise.
ld/
* testsuite/ld-powerpc/tlsgd.d,
* testsuite/ld-powerpc/tlsgd.s,
* testsuite/ld-powerpc/tlsie.d,
* testsuite/ld-powerpc/tlsie.s,
* testsuite/ld-powerpc/tlsld.d,
* testsuite/ld-powerpc/tlsld.s: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
This little patch adds support to the eBPF port of GAS for a few data
directives. The names for the directives have been chosen to be
coherent with the suffixes used in eBPF instructions: b, h, w and dw
for 8, 16, 32 and 64-bit values respectively.
Documentation and tests included.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_pseudo_table): .half, .word and .dword.
* testsuite/gas/bpf/data.s: New file.
* testsuite/gas/bpf/data.d: Likewise.
* testsuite/gas/bpf/data-be.d: Likewise.
* testsuite/gas/bpf/bpf.exp: Run data and data-be.
* doc/c-bpf.texi (BPF Directives): New section.
Once operand parsing has completed, the simpler check of Operand_Mem can
be used in places where i.types[] got passed to operand_type_check().
Note that this has shown a couple of omissions of adjusting i.flags[]
when playing with i.op[] / i.types[] / i.tm.operand_types[]. Not all of
them get added here, just all of the ones needed in process_operands().
... instead of an operand type bit: It's an insn property, not an
operand one. There's just one actual change to be made to the
templates: Most are now required to have the (unswapped) destination go
into ModR/M.rm, so VMOVD template needs its opcode adjusted accordingly
and its operands swapped. {,V}MOVS{S,D}, otoh, are left alone in this
regard, as otherwise generated code would differ from what we've been
producing so far (which I don't think is wanted).
Take the opportunity and add a missing IgnoreSize to pextrb (leading to
an error in 16-bit mode), and take the liberty to once again drop stray
IgnoreSize attributes from lines changed and neighboring related ones.
They're the only exception to there generally being no mix of register
kinds possible in an insn operand template, and there being two bits per
operand for their representation is also quite wasteful, considering the
low number of uses. Fold both bits and deal with the little bit of
fallout.
Also take the liberty and drop dead code trying to set REX_B: No segment
register has RegRex set on it.
Additionally I was quite surprised that PUSH/POP with the permitted
segment registers is not covered by the test cases. Add the missing
pieces.
This patch fixes the eBPF CPU description in order to reflect the
right explicit arguments passed to the ldabs{b,h,w,dw} instructions,
updates the corresponding GAS tests, and updates the BPF section of
the GAS manual.
cpu/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlabs): New pmacro.
(dlind): Likewise.
opcodes/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
gas/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: ldabs instructions do not take a `src'
register as an argument.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
* doc/c-bpf.texi (BPF Opcodes): Update to reflect the correct
explicit arguments to ldabs and ldind instructions.
The eBPF non-generic load instructions ldind{b,h,w,dw} and
ldabs{b,h,w,dw} do not take an explicit destination register as an
argument. Instead, they put the loaded value in %r0, implicitly.
This patch fixes the CPU BPF description to not expect a 'dst'
argument in these arguments, regenerates the corresponding files in
opcodes, and updates the impacted GAS tests.
Tested in a x86-64 host.
cpu/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlsi): ldabs and ldind instructions do not take an
explicit 'dst' argument.
opcodes/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
gas/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: Do not use explicit arguments for
ldabs and ldind instructions.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
git commit f2d4ba38f5 caused many failures for mips-sgi-irix targets,
and added a new test that failed for aarch64, nds32, and rl78.
The mips failures are due to BSF_OBJECT being set in many cases for
symbols by the mips .global/.globl directive. This patch removes that
code and instead sets BSF_OBJECT in a target frob_symbol function,
also moving the mips hacks in elf_frob_symbol to the new function.
Note that common symbols are handled fine in elf.c:swap_out_syms
without needing to set BSF_OBJECT, so that old code can disappear.
* config/obj-elf.c (elf_frob_symbol): Remove mips hacks.
* config/tc-mips.h (tc_frob_symbol): Define.
(mips_frob_symbol): Declare.
* config/tc-mips.c (s_mips_globl): Don't set BSF_OBJECT for irix.
(mips_frob_symbol): Fudge symbols for irix here.
* testsuite/gas/elf/type-2.e: Allow random target symbols.
From Kito Cheng <kito.cheng@sifive.com>
gas/ChangeLog
* doc/c-riscv.texi (Instruction Formats): Add r4 type.
* testsuite/gas/riscv/insn.d: Add testcase for r4 type.
* testsuite/gas/riscv/insn.s: Ditto.
* doc/c-riscv.texi (Instruction Formats): Add b and j type.
* testsuite/gas/riscv/insn.d: Add test case for b and j type.
* testsuite/gas/riscv/insn.s: Ditto.
* testsuite/gas/riscv/insn.s: Correct instruction type for load
and store.
* testsuite/gas/riscv/insn.d: Using regular expression to match
address.
* doc/c-riscv.texi (Instruction Formats): Fix encoding table for SB
type and fix typo.
opcode/ChangeLog
* riscv-opc.c (riscv_insn_types): Add r4 type.
* riscv-opc.c (riscv_insn_types): Add b and j type.
* opcodes/riscv-opc.c (riscv_insn_types): Remove incorrect
format for sb type and correct s type.
For another patch I wanted to use a sufficiently benign option (simply
to be able to specify one, which certain test case invocations require),
and I stumbled across -Q in the --help output. Before realizing that
this is x86-specific anyway, I've tried and and ran into a mysterious
testsuite failure, until I further realized that other than the help
text suggests the option requires an argument. Correct the help text,
and make the implementation actually match what the comment there has
been describing (and what the help text now says).
Recently a patch was submitted for a Xen Project test harness binary to
override the compiler specified @object to @func (see [1]). In a reply I
suggested we shouldn't make ourselves dependent on currently unspecified
behavior of gas here: It accumulates all requests, and then
bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes
certain flags over others.
Make the behavior predictable: Generally the last .type is what counts.
Exceptions are directives which set multiple bits (TLS, IFUNC, and
UNIQUE): Subsequent directives requesting just the more generic bit
(i.e. FUNC following IFUNC) won't clear the more specific one. Warn
about incompatible changes, except from/to STT_NOTYPE.
Also add a new target hook, which hppa wants to use right away afaict.
In the course of adding the warning I ran into two ld testsuite
failures. I can only assume that it was a copy-and-paste mistake that
lead to the same symbol having its type set twice.
[1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
For example, when provided with the (incorrect) instruction
st4 {v0.16b-v3.16b}[4],[x0]
currently assembler provides the following error message
"Error: comma expected between operands at operand 2 -- `st4 {v0.16b-v3.16b}[4],[x0]'".
This was due to the assembler consuming the {v0.16b-v3.16b} as the first operand leaving
[4],[x0] as what it believed to be the second operand.
The actual error is that the first operand should be of element type and not
vector type (as provided). The new diagnostic for this error is
"Error: expected element type rather than vector type at operand 1 -- `st4 {v0.16b-v3.16b}[4],[x0]'.
Added testcases to check for the correct diagnostic message as well as checking that
variations of the structural load/store by element instruction also generate the error
when they have the same problem.
* config/tc-aarch64.c (parse_operands): Add error check.
* testsuite/gas/aarch64/diagnostic.l: New test.
* testsuite/gas/aarch64/diagnostic.s: New test.
* testsuite/gas/aarch64/illegal.l: New tests.
* testsuite/gas/aarch64/illegal.s: New tests.
The entry for the FMOV alias of FCPY was missing C_SCAN_MOVPRFX.
(The entry for FCPY itself was OK.)
This was the only /m-predicated instruction I could see that was
missing the flag.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_SCAN_MOVPRFX for the
SVE FMOV alias of FCPY.
gas/
* testsuite/gas/aarch64/sve-movprfx_27.s,
* testsuite/gas/aarch64/sve-movprfx_27.d: New test.
SVE FCVTZS, FCVTZU, SCVTF and UCVTF need the same treatment as FCVT:
the register size used in a predicated MOVPRFX must be the wider of
the destination and source sizes.
Since I was adding a (supposedly) complete set of tests for converts,
it seemed more consistent to add a complete set of tests for shifts
as well, even though there's no bug to fix there.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Add C_MAX_ELEM flags
to SVE fcvtzs, fcvtzu, scvtf and ucvtf entries.
gas/
* testsuite/gas/aarch64/sve-movprfx_26.s: Also test FCVTZS, FCVTZU,
SCVTF, UCVTF, LSR and ASR.
* testsuite/gas/aarch64/sve-movprfx_26.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_26.l: Likewise.
One of the MOVPRFX tests has:
output register of preceding `movprfx' used as input at operand 3 -- `cpy z1.d,p1/m,x1'
But X1 and Z1 are not the same register, so the instruction is
actually OK.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-opc.c (verify_constraints): Skip GPRs when scanning the
registers in an instruction prefixed by MOVPRFX.
gas/
* testsuite/gas/aarch64/sve-movprfx_25.s: Allow CPY Z1.D.P1/M,X1
to be prefixed by MOVPRFX.
* testsuite/gas/aarch64/sve-movprfx_25.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_25.l: Likewise.
PR 24748
* write.c (create_note_reloc): Add desc2_offset parameter. Change
name of offset parameter to note_offset. Only use desc2_offset
when placing addend into REL reloc's address space.
(maybe_generate_build_notes): Update parameters passed to
create_note_reloc.
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
It is pretty wasteful to have a per-operand flag which is used in
exactly 4 cases. It can be relatively easily replaced, and by doing so
I've actually found some dead code to remove at the same time (there's
no case of ImmExt set at the same time as Vec_Imm4).