xtensa disassembler does not use information from the .xt.prop sections
to switch between code/data disassembly in text sections. This may
result in incorrect disassembly when data is interpreted as code and
disassembler loses synchronization with instruction stream. Use .xt.prop
section information to correctly interpret code and data and synchronize
with instruction stream.
2018-06-04 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (xtensa_read_table_entries): Make global.
(compute_fill_extra_space): Drop declaration. Rename function to
xtensa_compute_fill_extra_space.
(compute_ebb_actions, remove_dead_literal): Update references to
compute_fill_extra_space.
include/
* elf/xtensa.h (xtensa_read_table_entries)
(xtensa_compute_fill_extra_space): New declarations.
opcodes/
* xtensa-dis.c (bfd.h, elf/xtensa.h): New includes.
(dis_private): Add new fields for property section tracking.
(xtensa_coalesce_insn_tables, xtensa_find_table_entry)
(xtensa_instruction_fits): New functions.
(fetch_data): Bump minimal fetch size to 4.
(print_insn_xtensa): Make struct dis_private static.
Load and prepare property table on section change.
Don't disassemble literals. Don't disassemble instructions that
cross property table boundaries.
Move gdb/common/diagnostics.h to include/diagnostics.h so that it can
be used in binutils.
gdb/
* ada-lex.l: Include "diagnostics.h" instead of
"common/diagnostics.h".
* unittests/environ-selftests.c: Likewise.
* common/diagnostics.h: Moved to ../include.
include/
* diagnostics.h: Moved from ../gdb/common/diagnostics.h.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
This patch adds constraints for read and write only system registers with the
msr and mrs instructions. The code will treat having both flags set and none
set as the same. These flags add constraints that must be matched up. e.g. a
system register with a READ only flag set, can only be used with mrs. If The
constraint fails a warning is emitted.
Examples of the warnings generated:
test.s: Assembler messages:
test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3'
test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0'
test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3'
and disassembly notes:
0000000000000000 <main>:
0: d5130503 msr dbgdtrtx_el0, x3
4: d5130503 msr dbgdtrtx_el0, x3
8: d5330503 mrs x3, dbgdtrrx_el0
c: d5330503 mrs x3, dbgdtrrx_el0
10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register.
Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during
disassembly the constraints are use to disambiguate between the two. An exact
constraint match is always prefered over partial ones if available.
As always the warnings can be suppressed with -w and also be made errors using
warnings as errors.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
gas/
PR binutils/21446
* testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test.
* testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise.
* testsuite/gas/aarch64/sysreg-diagnostic.s: New.
* testsuite/gas/aarch64/sysreg-diagnostic.l: New.
* testsuite/gas/aarch64/sysreg-diagnostic.d: New.
include/
PR binutils/21446
* opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New.
opcodes/
PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).
This patch adds a new platform option "notes" that can be used to indicate if
disassembly notes should be placed in the disassembly as comments.
These notes can contain information about a failing constraint such as reading
from a write-only register. The disassembly will not be blocked because of this
but -M notes will emit a comment saying that the operation is not allowed.
For assembly this patch adds a new non-fatal status for errors. This is
essentially a warning. The reason for not creating an actual warning type is
that this causes the interaction between the ordering of warnings and errors to
be problematic. Currently the error buffer is almost always filled because of
the way operands are matched during assembly. An earlier template may have put
an error there that would only be displayed if no other template matches or
generates a higher priority error. But by definition a warning is lower
priority than a warning, so the error (which is incorrect if another template
matched) will supersede the warning. By treating warnings as errors and only
later relaxing the severity this relationship keeps working and the existing
reporting infrastructure can be re-used.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
* NEWS: Document notes and warnings.
gas/
PR binutils/21446
* config/tc-aarch64.c (print_operands): Indicate no notes.
(output_operand_error_record): Support non-fatal errors.
(output_operand_error_report, warn_unpredictable_ldst, md_assemble):
Likewise.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_operand_error): Add non_fatal.
(aarch64_print_operand): Support notes.
opcodes/
PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.
This patch if the first patch in a series to add the ability to add constraints
to system registers that an instruction must adhere to in order for the register
to be usable with that instruction.
These constraints can also be used to disambiguate between registers with the
same encoding during disassembly.
This patch adds a new flags entry in the sysreg structures and ensures it is
filled in and read out during assembly/disassembly. It also adds the ability for
the assemble and disassemble functions to be able to gracefully fail and re-use
the existing error reporting infrastructure.
The return type of these functions are changed to a boolean to denote success or
failure and the error structure is passed around to them. This requires
aarch64-gen changes so a lot of the changes here are just mechanical.
gas/
PR binutils/21446
* config/tc-aarch64.c (parse_sys_reg): Return register flags.
(parse_operands): Fill in register flags.
gdb/
PR binutils/21446
* aarch64-tdep.c (aarch64_analyze_prologue,
aarch64_software_single_step, aarch64_displaced_step_copy_insn):
Indicate not interested in errors.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct.
(aarch64_decode_insn): Accept error struct.
opcodes/
PR binutils/21446
* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
and take error struct.
* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
aarch64_ins_reglist, aarch64_ins_ldst_reglist,
aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
aarch64_ext_reglist, aarch64_ext_ldst_reglist,
aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
(determine_disassembling_preference, aarch64_decode_insn,
print_insn_aarch64_word, print_insn_data): Take errors struct.
(print_insn_aarch64): Use errors.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-gen.c (print_operand_inserter): Use errors and change type to
boolean in aarch64_insert_operan.
(print_operand_extractor): Likewise.
* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef.
include * opcode/nfp.h: Use uint64_t instead of bfd_vma.
opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
This patch is aimed at silencing gcc8 -Wstringop-truncation warnings.
Unfortunately adding __attribute__ ((__nonstring)) doesn't work in a
number of the places patched here, (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643) so if you have
recent glibc headers installed you'll need to configure binutils with
--disable-werror to compile using gcc8 or gcc9.
include/
* ansidecl.h: Import from gcc.
* coff/internal.h (struct internal_scnhdr): Add ATTRIBUTE_NONSTRING
to s_name.
(struct internal_syment): Add ATTRIBUTE_NONSTRING to _n_name.
bfd/
* elf-linux-core.h (struct elf_external_linux_prpsinfo32_ugid32),
(struct elf_external_linux_prpsinfo32_ugid16),
(struct elf_external_linux_prpsinfo64_ugid32),
(struct elf_external_linux_prpsinfo64_ugid16): Add ATTRIBUTE_NONSTRING
to pr_fname and pr_psargs fields. Remove GCC diagnostic pragmas.
Move comment to..
* elf.c (elfcore_write_prpsinfo): ..here. Indent nested preprocessor
directives.
* elf32-arm.c (elf32_arm_nabi_write_core_note): Add ATTRIBUTE_NONSTRING
to data.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Likewise.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
* elf64-x86-64.c (elf_x86_64_write_core_note): Add GCC diagnostic
pragmas.
* peXXigen.c (_bfd_XXi_swap_scnhdr_out): Use strnlen to avoid
false positive gcc-8 warning.
gas/
* config/obj-evax.c (shorten_identifier): Use memcpy in place
of strncpy.
* config/obj-macho.c (obj_mach_o_make_or_get_sect): Ensure
segname and sectname fields are NUL terminated.
Define and handle TLS relocations for FDPIC in BFD and gas.
In gas, the new relocations are rejected if the --fdpic option was not
specified.
We also define the __tdata_start symbol to mark the start of the
.tdata section. This allows FDPIC static binaries to find the start of
.tdata section, since phdr->p_vaddr of TLS segment is not a valid
value for FDPIC.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/:
* bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC)
(BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New
relocations.
* elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations.
(elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC.
(struct elf32_arm_link_hash_table): Update comment.
(elf32_arm_final_link_relocate): Handle TLS FDPIC relocations.
(IS_ARM_TLS_RELOC): Likewise.
(elf32_arm_check_relocs): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_size_dynamic_sections): Update comment.
* reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC,
BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC.
gas/
* config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC,
GOTTPOFF_FDIC relocations.
(md_apply_fix): Handle the new TLS FDPIC relocations.
(tc_gen_reloc): Likewise.
(arm_fix_adjustable): Likewise.
include/
* elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC,
R_ARM_TLS_IE32_FDPIC.
ld/
* scripttempl/elf.sc: Define __tdata_start for .tdata section.
ELF files targetting ARM FDPIC use the ELFOSABI_ARM_FDPIC flag.
Set it appropriately in file generators (eg. gas), and handle it in
readers (eg. readelf).
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/
* elf32-arm.c (elf32_arm_print_private_bfd_data): Support
EF_ARM_PIC and ELFOSABI_ARM_FDPIC.
(elf32_arm_post_process_headers): Support ELFOSABI_ARM_FDPIC.
(ELF_OSABI): Define to ELFOSABI_ARM_FDPIC.
binutils/
* readelf.c (decode_ARM_machine_flags): Support EF_ARM_PIC.
(get_osabi_name): Support ELFOSABI_ARM_FDPIC.
gas/
* config/tc-arm.c (arm_fdpic): New.
(elf32_arm_target_format): Support FDPIC.
(OPTION_FDPIC): New.
(md_longopts): Support FDPIC.
(md_parse_option): Likewise.
(md_show_usage): Likewise.
include/
* elf/arm.h (EF_ARM_FDPIC): New.
Andrew Sadek <andrew.sadek.se@gmail.com>
A new implemented feature in GCC Microblaze that allows Position
Independent Code to run using Data Text Relative addressing instead
of using Global Offset Table.
Its aim was to make 'PIC' more efficient and flexible as elf size
excess performance overhead were noticed when using GOT due to the
indirect addressing.
include/ChangeLog:
* bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct.
* elf/microblaze.h (Add 3 new relocations):
R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64
and R_MICROBLAZE_TEXTREL_32_LO for relax function.
bfd/ChangeLog:
* bfd/reloc.c (2 new BFD relocations):
BFD_RELOC_MICROBLAZE_64_TEXTPCREL &
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
* bfd/bfd-in2.h: Regenerate
* bfd/libbfd.h: Regenerate
* bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3
new relocs and handle them in both relocate and relax functions.
(microblaze_elf_reloc_type_lookup): add mapping between for new
bfd relocs.
(microblaze_elf_relocate_section): Handle new relocs in case of
elf relocation.
(microblaze_elf_relax_section): Handle new relocs for elf relaxation.
gas/ChangeLog:
* gas/config/tc-microblaze.c (Handle new relocs directives in
assembler): Handle new relocs from compiler output.
(imm_types): add new imm types for data text relative addressing
TEXT_OFFSET, TEXT_PC_OFFSET
(md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_estimate_size_before_relax): estimate size for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(tc_gen_reloc): generate relocations for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
ld/ChangeLog:
* ld/lexsup.c (Add 2 ld options):
(ld_options): add disable-multiple-abs-defs @ 'ld_options' array
(parse_args): parse new option and pass flag to 'link_info' struct.
* ld/ldlex.h (Add enum): add new enum @ 'option_values' enum.
* ld/ld.texinfo (Add new option): Add description for
'disable-multiple-abs-defs'
* ld/main.c: Initialize flags with false @ 'main'. Handle
disable-multiple-abs-defs @ 'mutiple_definition'.
In addition to the existing relocs we need two more to mark all
instructions in the call sequence, PLTCALL on the call itself (plus
the toc restore insn for ppc64), and PLTSEQ on others. All
relocations in a particular sequence have the same symbol.
Example ppc64 ELFv2 assembly:
.reloc .,R_PPC64_PLTSEQ,puts
std 2,24(1)
addis 12,2,puts@plt@ha # .reloc .,R_PPC64_PLT16_HA,puts
ld 12,puts@plt@l(12) # .reloc .,R_PPC64_PLT16_LO_DS,puts
.reloc .,R_PPC64_PLTSEQ,puts
mtctr 12
.reloc .,R_PPC64_PLTCALL,puts
bctrl
ld 2,24(1)
Example ppc32 -fPIC assembly:
addis 12,30,puts+32768@plt@ha # .reloc .,R_PPC_PLT16_HA,puts+0x8000
lwz 12,12,puts+32768@plt@l # .reloc .,R_PPC_PLT16_LO,puts+0x8000
.reloc .,R_PPC_PLTSEQ,puts+32768
mtctr 12
.reloc .,R_PPC_PLTCALL,puts+32768
bctrl
Marking sequences like this allows the linker to convert them to nops
and a direct call if the target symbol turns out to be local.
When the call is __tls_get_addr, each relocation shown above is paired
with an R_PPC*_TLSLD or R_PPC*_TLSGD reloc to additionally mark the
sequence for possible TLS optimization. The TLSLD or TLSGD relocs are
emitted first.
include/
* elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define.
* elf/ppc64.h (R_PPC64_PLTSEQ, R_PPC64_PLTCALL): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add PLTSEQ and PLTCALL howtos.
(is_plt_seq_reloc): New function.
(ppc_elf_check_relocs): Handle PLTSEQ and PLTCALL relocs.
(ppc_elf_tls_optimize): Handle inline plt call sequence.
(ppc_elf_relax_section): Handle PLTCALL reloc.
(ppc_elf_relocate_section): Nop out inline plt call sequence when
resolving locally.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_PLTSEQ and
R_PPC64_PLTCALL entries. Comment R_PPC64_TOCSAVE.
(has_tls_get_addr_call): Correct comment.
(is_branch_reloc): Add PLTCALL.
(is_plt_seq_reloc): New function.
(ppc64_elf_check_relocs): Handle PLT16_LO_DS reloc. Set
has_tls_reloc for R_PPC64_TLSGD and R_PPC64_TLSLD. Create plt
entry for R_PPC64_PLTCALL.
(ppc64_elf_tls_optimize): Handle inline plt call sequence.
(ppc_type_of_stub): Handle PLTCALL reloc.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_relocate_section): Set "can_plt_call" for PLTCALL
reloc insn. Nop out inline plt call sequence when resolving
locally. Handle __tls_get_addr inline plt call optimization.
elfcpp/
* powerpc.h (R_POWERPC_PLTSEQ, R_POWERPC_PLTCALL): Define.
gold/
* powerpc.cc (Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call):
Handle inline plt sequence relocs.
(Stub_table::Plt_stub_key::Plt_stub_key): Likewise.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
This patch adds the following relocation support into binutils gas.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
The following bits in DT_FLAGS_1 are used by Solaris:
#define DF_1_KMOD 0x10000000 /* kernel module */
#define DF_1_WEAKFILTER 0x20000000 /* apply weak binding to DT_FILTER */
#define DF_1_NOCOMMON 0x40000000 /* no COMMON symbols exist */
binutils/
* readelf.c (process_dynamic_section): Also dump DF_1_KMOD,
DF_1_WEAKFILTER and DF_1_NOCOMMON.
include/
* elf/common.h (DF_1_KMOD): New.
(DF_1_WEAKFILTER): Likewise.
(DF_1_NOCOMMON): Likewise.
PR 22113
incldue * coff/pe.h (struct pex64_unwind_info): Add a rawUnwindCodesEnd
field.
bfd * pei-x86_64.c (pex64_get_unwind_info): Change to a boolean
function. Add an end address parameter. Check access of the data
pointer to make sure that they do not extend beyond the end
address. Return FALSE if any check fails. Add the end address
pointer to the ui structure.
(pex64_xdata_print_uwd_codes): Check accesses of the raw unwind
codes to make sure that they do not extend beyond the end address
pointer. Print an error message and return immediately if any
check fails.
Among the macros to manipulate an arm_feature_set structure is the
ARM_FEATURE_COPY which copy the value of a feature set into another.
This can be achieved with a simple assignement which most of the
existing code does. This patch removes the last 2 uses of that macro and
remove the macro altogether.
2018-02-27 Thomas Preud'homme <thomas.preudhomme@arm.com>
include/
* opcode/arm.h (ARM_FEATURE_COPY): Remove macro definition.
2018-02-27 Thomas Preud'homme <thomas.preudhomme@arm.com>
opcodes/
* arm-dis.c (print_insn_coprocessor): Replace uses of ARM_FEATURE_COPY
macro by assignements.
The `M' and `m' MIPS16 operand codes are functionally the same, denoting
a 7-bit register list that is encoded the same way for both SAVE and
RESTORE. Use `m' for both instructions then, making `M' available for a
different use.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'M'>: Remove case.
(mips16_opcodes): Replace `M' with `m' for "restore".
include/
* opcode/mips.h: Remove `M' operand code.
See email thread starting here: https://www.sourceware.org/ml/binutils/2018-01/msg00001.html
include * coff/msdos.h: New header.
* coff/pe.h: Move common defines to msdos.h.
* coff/powerpc.h: Likewise.
bfd * i386msdos.c (msdos_mkobject); New function.
(msdos_object_p): New function.
(i386_msdos_vec): Use msdos_object_p as the check_format
function.
* peicode.h: Rename external_PEI_DOS_hdr, DOSMAGIC, and
NT_SIGNATURE to external_DOS_hdr, IMAGE_DOS_SIGNATURE, and
IMAGE_NT_SIGNATURE.
* peXXigen.c: Likewise.
* coff-ia64.c: Likewise.
The new "-z separate-code" option will generate separate code LOAD
segment which must be in wholly disjoint pages from any other data.
include/
PR ld/22393
* bfdlink.h (bfd_link_info): Add separate_code.
ld/
PR ld/22393
* NEWS: Mention "-z separate-code".
* emultempl/elf32.em (gld${EMULATION_NAME}_get_script): Get
builtin linker scripts and return linker scripts from disk for
"-z separate-code".
(gld${EMULATION_NAME}_handle_option): Handle "-z separate-code"
and "-z noseparate-code".
* genscripts.sh: Generate linker scripts for "-z separate-code".
(LD_FLAG): Set to *textonly for "-z separate-code".
* ld.texinfo: Document "-z separate-code".
* lexsup.c (elf_shlib_list_options): Add linker help messsages
for "-z separate-code" and "-z noseparate-code".
* scripttempl/elf.sc (SEPARATE_TEXT): New
(TEXT_SEGMENT_ALIGN): Likewise.
Use ${TEXT_SEGMENT_ALIGN} to align and pad text segment to
${MAXPAGESIZE}.
gas/
* testsuite/gas/riscv/priv-reg.s: Add missing stval and mtval.
* testsuite/gas/riscv/priv-reg.d: Likewise.
include/
* opcode/riscv-opc.h (CSR_SBADADDR): Rename to CSR_STVAL. Rename
DECLARE_CSR entry. Add alias to map sbadaddr to CSR_STVAL.
(CSR_MBADADDR): Rename to CSR_MTVAL. Rename DECLARE_CSR entry.
Add alias to map mbadaddr to CSR_MTVAL.
Dot products deviate from the normal disassembly rules for lane indexed
instruction. Their canonical representation is in the form of:
v0.2s, v0.8b, v0.4b[0] instead of v0.2s, v0.8b, v0.b[0] to try to denote
that these instructions select 4x 1 byte elements instead of a single 1 byte
element.
Previously we were disassembling them following the normal rules, this patch
corrects the disassembly.
gas/
PR gas/22559
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_S_4B.
* gas/testsuite/gas/aarch64/dotproduct.d: Update disassembly.
include/
PR gas/22559
* aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_S_4B.
opcodes/
PR gas/22559
* aarch64-asm.c (aarch64_ins_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-dis.c (aarch64_ext_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
* aarch64-tbl.h (QL_V2DOT): Change S_B to S_4B.
Previously parse_vector_type_for_operand was changed to allow the use of 4b
register size for indexed lane instructions. However this had the unintended
side effect of also allowing 4b for normal vector registers.
Because this support was only partial the rest of the tool silently treated
4b as 8b and continued. This patch adds full support for 4b so it can be
properly distinguished from 8b and the correct errors are generated.
With this patch you still can't encode any instruction which actually requires
v<num>.4b but such instructions don't exist so to prevent needing a workaround
in get_vreg_qualifier_from_value this was just omitted.
gas/
PR gas/22529
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_V_4B.
* gas/testsuite/gas/aarch64/pr22529.s: New.
* gas/testsuite/gas/aarch64/pr22529.d: New.
* gas/testsuite/gas/aarch64/pr22529.l: New.
include/
PR gas/22529
* opcode/aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_V_4B.
opcodes/
PR gas/22529
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
Gold plugins may wish to further process an input file added by a plugin. For
example, the plugin may need to assign a unique segment for sections in a
plugin-generated input file. This patch adds a plugin callback that the linker
will call when reading symbols from a new input file added after the
all_symbols_read event (i.e. an input file added by a plugin).
2017-12-11 Stephen Crane <sjc@immunant.com>
* plugin-api.h: Add new plugin hook to allow processing of input
files added by a plugin.
(ld_plugin_new_input_handler): New function hook type.
(ld_plugin_register_new_input): New interface.
(LDPT_REGISTER_NEW_INPUT_HOOK): New enum val.
(tv_register_new_input): New member.
* plugin.cc (Plugin::load): Include hooks for register_new_input
in transfer vector.
(Plugin::new_input): New function.
(register_new_input): New function.
(Plugin_manager::claim_file): Call Plugin::new_input if in
replacement phase.
* plugin.h (Plugin::set_new_input_handler): New function.
* testsuite/plugin_new_section_layout.c: New plugin to test
new_input plugin API.
* testsuite/plugin_final_layout.sh: Add new input test.
* testsuite/Makefile.am (plugin_layout_new_file): New test case.
* testsuite/Makefile.in: Regenerate.
CORE PT_NOTE segments may have p_align values of 0 or 1. gABI specifies
that PT_NOTE alignment should be aligned to 4 bytes for 32-bit objects
and to 8 bytes for 64-bit objects. If segment alignment is less than 4,
we use 4 byte alignment.
This reverts commit 650444eb54.
With this patch, running the GDB test case gdb.base/auxv.exp is stuck in
an infinite loop, consuming memory to the point that it renders the
machine unusable. I am reverting it so we can take our time to
investigate while not killing all the developers' machines.
According to gABI, in a note entry, the note name field, not note name
size, is padded for the note descriptor. And the note descriptor field,
not note descriptor size, is padded for the next note entry. Also notes
are aligned to 4 bytes in 32-bit objects and 8 bytes in 64-bit objects.
Since on Linux, .note.ABI-tag and .note.gnu.build-id notes are always
aligned to 4 bytes, we need to use alignment of note section or note
segment, instead of assuming alignment based on ELF file class.
Tested on i686 and x86-64.
bfd/
PR binutils/22444
* elf.c (elf_read_notes): Add an argument for note aligment.
(elf_parse_notes): Likewise.
(_bfd_elf_make_section_from_shdr): Pass section aligment to
elf_parse_notes.
(bfd_section_from_phdr): Pass segment aligment to elf_read_notes.
(elf_parse_notes): Add an argument for note aligment. Use
ELF_NOTE_DESC_OFFSET to get the offset of the note descriptor.
Use ELF_NOTE_NEXT_OFFSET to get the offset of the next note
entry.
(elf_read_notes): Add an argument for note aligment and pass it
to elf_parse_notes.
binutils/
PR binutils/22444
* readelf.c (process_notes_at): Use ELF_NOTE_DESC_OFFSET to get
the offset of the note descriptor. Use ELF_NOTE_NEXT_OFFSET to
get the offset of the next note entry.
include/
PR binutils/22444
* elf/external.h (ELF_ALIGN_UP): New.
(ELF_NOTE_DESC_OFFSET): Likewise.
(ELF_NOTE_NEXT_OFFSET): Likewise.
This patch separates the new FP16 instructions backported from Armv8.4-a to Armv8.2-a
into a new flag order to distinguish them from the rest of the already existing optional
FP16 instructions in Armv8.2-a.
The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory on
Armv8.4-a.
gas/
* config/tc-aarch64.c (fp16fml): New.
* doc/c-aarch64.texi (fp16fml): New.
* testsuite/gas/aarch64/armv8_2-a-crypto-fp16.d (fp16): Make fp16fml.
* testsuite/gas/aarch64/armv8_3-a-crypto-fp16.d (fp16): Make fp16fml.
include/
* opcode/aarch64.h: (AARCH64_FEATURE_F16_FML): New.
(AARCH64_ARCH_V8_4): Enable AARCH64_FEATURE_F16_FML by default.
opcodes/
* aarch64-tbl.h (aarch64_feature_fp_16_v8_2): Require AARCH64_FEATURE_F16_FML
and AARCH64_FEATURE_F16.
The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory
from Armv8.4-a.
gas/
* config/tc-arm.c (arm_ext_fp16_fml, fp16fml): New.
(do_neon_fmac_maybe_scalar_long): Use arm_ext_fp16_fml.
* doc/c-arm.texi (fp16, fp16fml): New.
* testsuite/gas/arm/armv8_2-a-fp16.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_3-a-fp16.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2.d (fp16): Make fp16fml.
include/
* opcode/arm.h: (ARM_EXT2_FP16_FML): New.
(ARM_AEXT2_V8_4A): Add ARM_EXT2_FP16_FML.
Linking EFI executables from ELF object files can result in corrupted
COFF section flags if the section's alignment is too high. Issue a
diagnostic in that case, erroring out if this is not a final link, and
make sure only in-range values get written to the output image.
While doing this also make tic80 use the generic alignment macros
instead of custom #ifdef-ary.
No testsuite regressions for the range of COFF/PE targets that actually
cross-build in the first place on x86-64-linux.
The new options are:
+aes: Enables the AES instructions of Armv8-a,
enabled by default with +crypto.
+sha2: Enables the SHA1 and SHA2 instructions of Armv8-a,
enabled by default with +crypto.
These options have been turned on by default when +crypto
is used, as such no breakage is expected.
The reason for the split is because with the introduction of Armv8.4-a
the implementation of AES has explicitly been made independent of the
implementation of the other crypto extensions. Backporting the split does
not break any of the previous requirements and so is safe to do.
gas * config/tc-aarch64.c
(aarch64_features): Include AES and SHA2 in CRYPTO.
Add SHA2 and AES.
include * opcode/aarch64.h:
(AARCH64_FEATURE_SHA2, AARCH64_FEATURE_AES): New.
opcodes * aarch64-tbl.h (aarch64_feature_crypto): Add AES and SHA2.
(aarch64_feature_sha2, aarch64_feature_aes): New.
(SHA2, AES): New.
(AES_INSN, SHA2_INSN): New.
(pmull, pmull2, aese, aesd, aesmc, aesimc): Change to AES_INS.
(sha1h, sha1su1, sha256su0, sha1c, sha1p,
sha1m, sha1su0, sha256h, sha256h2, sha256su1):
Change to SHA2_INS.
gas * config/tc-arm.c (arm_extensions):
(arm_archs): New entry for "armv8.4-a".
Add FPU_ARCH_DOTPROD_NEON_VFP_ARMV8.
(arm_ext_v8_2): New variable.
(enum arm_reg_type): New enumeration REG_TYPE_NSD.
(reg_expected_msgs): New entry for REG_TYPE_NSD.
(parse_typed_reg_or_scalar): Handle REG_TYPE_NSD.
(parse_scalar): Support REG_TYPE_VFS.
(enum operand_parse_code): New enumerations OP_RNSD and OP_RNSD_RNSC.
(parse_operands): Handle OP_RNSD and OP_RNSD_RNSC.
(NEON_SHAPE_DEF): New entries for DHH and DHS.
(neon_scalar_for_fmac_fp16_long): New function to generate Rm encoding
for new FP16 instructions in ARMv8.2-A.
(do_neon_fmac_maybe_scalar_long): New function to encode new FP16
instructions in ARMv8.2-A.
(do_neon_vfmal): Wrapper function for vfmal.
(do_neon_vfmsl): Wrapper function for vfmsl.
(insns): New entries for vfmal and vfmsl.
* doc/c-arm.texi (-march): Document "armv8.4-a".
* testsuite/gas/arm/dotprod-mandatory.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16.d: New test.
* testsuite/gas/arm/armv8_3-a-fp16.d: New test.
* testsuite/gas/arm/armv8_4-a-fp16.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.l: New error file.
opcodes * arm-dis.c (coprocessor_opcodes): New entries for ARMv8.2-A new
FP16 instructions, including vfmal.f16 and vfmsl.f16.
include * opcode/arm.h (ARM_AEXT2_V8_4A): Include Dot Product feature.
(ARM_EXT2_V8_4A): New macro.
(ARM_AEXT2_V8_4A): Likewise.
(ARM_ARCH_V8_4A): Likewise.
The RISC-V privileged ISA changed the name of sptbr (Supervisor Page
Table Base Register) to satp (Supervisor Address Translation and
Protection) to reflect the fact it could be used for more than just
paging. This patch adds an alias, as they're the same register.
include/ChangeLog
2017-11-06 Palmer Dabbelt <palmer@dabbelt.com>
* opcode/riscv-opc.h (sptbr): Rename to satp.
(CSR_SPTBR): Rename to CSR_SATP.
(sptbr): Alias to CSR_SATP.
gas/ChangeLog
2017-11-06 Palmer Dabbelt <palmer@dabbelt.com>
* testsuite/gas/riscv/satp.d: New test.
testsuite/gas/riscv/satp.s: Likewise.
testsuite/gas/riscv/riscv.exp: Likewise.
config/tc-riscv.c (md_begin): Handle CSR aliases.
gas * config/tc-arm.c (arm_cpus):
Change FPU_ARCH_CRYPTO_NEON_VFP_ARMV8
into FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD.
include * opcode/arm.h (FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD):
New macro.
The FP16 feature is optional in ARMv8.2, so it is wrong to add it to
the default AARCH64_ARCH_V8_2 feature flags. This patch makes the
behaviour consistent with that of gcc, which also does not assume FP16
for ARMv8.2.
include/
* opcode/aarch64.h (AARCH64_ARCH_V8_2): Drop
AARCH64_FEATURE_F16.
This matches the ISA specification. This also adds two tests: one to
make sure the assembler rejects invalid 'c.lui's, and one to make sure
we only relax valid 'c.lui's.
bfd/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (_bfd_riscv_relax_lui): Don't relax to c.lui
when rd is x0.
include/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* opcode/riscv.h (VALID_RVC_LUI_IMM): c.lui can't load the
immediate 0.
gas/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* testsuite/gas/riscv/c-lui-fail.d: New testcase.
gas/testsuite/gas/riscv/c-lui-fail.l: Likewise.
gas/testsuite/gas/riscv/c-lui-fail.s: Likewise.
gas/testsuite/gas/riscv/riscv.exp: Likewise.
ld/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* ld/testsuite/ld-riscv-elf/c-lui.d: New testcase.
ld/testsuite/ld-riscv-elf/c-lui.s: Likewise.
ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp: New test suite.
FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.
Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.
bfd/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.
gas/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.
include/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.
opcodes/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
FreeBSD recently added two additional ELF auxiliary vectors. FreeBSD's
AT_HWCAP uses a different number compared to AT_HWCAP on Linux as the
numerical value was already in use for a different vector on FreeBSD.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_EHDRFLAGS, AT_FREEBSD_HWCAP): Define.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_EHDRFLAGS and
AT_HWCAP.
When dumping location lists, also dump locview lists that may be
interspersed with them, and bring view pairs next to the corresponding
location list entries.
This patch supports DW_AT_GNU_locviews as a separate attribute for
DWARF4- loc_lists and split (dwo) loclists, as well as DWARF5
loclists.
It also supports, in DWARF5 loclists, the proposed
DW_LLE_GNU_view_pair loclist entry type proposed for DWARF6.
The tests use 32-bit DWARF, even on 64-bit targets, resolving offsets
to constants so as to reduce the risk that relocations be created for
them, or that the offsets be rejected as nonconstants.
The patch also adds an xfail to an unrelated test, namely dw5, so that
no unexpected fails remain on nds32*-elf, one of the tested targets.
Reviewed-by: Alan Modra <amodra@gmail.com>
for include/ChangeLog
* dwarf2.def (DW_AT_GNU_locviews): New.
* dwarf2.h (enum dwarf_location_list_entry_type): Add
DW_LLE_GNU_view_pair.
(DW_LLE_view_pair): Define.
for binutils/ChangeLog
* dwarf.h (debug_info): Add loc_views and num_loc_views.
* dwarf.c (vm1): New constant.
(print_dwarf_view): New function.
(read_and_display_attr_value): Support DW_AT_GNU_locviews.
(process_debug_info): Keep num_loc_offsets and num_loc_views
in sync.
(display_view_pair_list): New function.
(display_loc_list_dwo): Take vstart_ptr; update it. Dump
location view pairs before the range they apply to, when a
viewlist augments the loc list.
(display_loc_list): Likewise. Check view numbers in range
tests.
(display_loclists_list): Likewise. Handle view pair entries,
and warn on trailing ones.
(loc_views): New variable.
(loc_offsets_compar): Compare loc_views if loc_offsets are the
same.
(display_debug_loc): Check and sort loc_views too. Accept
loc_view as expected_start. Skip if lists and views are the
same. Dump locview list separately in order, and pass the
locview list base to each list dump function. Warn and skip
overlap and hole checking if we find loclists and locviews to
not be adjacent.
* testsuite/binutils-all/locview-1.s: New.
* testsuite/binutils-all/readelf.locview-1: New.
* testsuite/binutils-all/locview-2.s: New.
* testsuite/binutils-all/readelf.locview-2: New.
* testsuite/binutils-all/readelf.exp: Run new tests. Fix
option spelling in pr18374 fail message. XFAIL dw5 test on
nds32*-elf.
As discussed in
How to use compile & execute function in GDB
https://sourceware.org/ml/gdb/2015-04/msg00026.html
GDB currently searches for compilers on /usr/bin/ARCH-OS-gcc and
chooses a match from there. However, it is not currently possible for
the user to override which compiler to use. This is what this patch
implements.
It is also a sync between GCC's and GDB's interfaces.
gdb/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add set compile-gcc and show
compile-gcc.
* compile/compile.c (compile_gcc, show_compile_gcc): New.
(compile_to_object): Implement compile_gcc.
(_initialize_compile): Install "set compile-gcc". Initialize
compile_gcc.
gdb/doc/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Compiling and Injecting Code): Add to subsection
"Compiler search for the compile command" descriptions of set
compile-gcc and show compile-gcc.
include/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gcc-interface.h (enum gcc_base_api_version): Update comment for
GCC_FE_VERSION_1.
(struct gcc_base_vtable): Rename set_arguments to set_arguments_v0.
Add set_arguments, set_triplet_regexp and set_driver_filename.
As discussed in
How to use compile & execute function in GDB
https://sourceware.org/ml/gdb/2015-04/msg00026.html
GDB currently searches for compilers on /usr/bin/ARCH-OS-gcc and
chooses a match from there. However, it is not currently possible for
the user to display which compiler was selected. Up until now, GDB's
compiler interface was not up-to-date with GCC's one, which means that
it wasn't possible to obtain this information. This patch implements
the mechanisms necessary for that.
gdb/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile.c (compile_to_object): Conditionally call
set_verbose. Conditionally call compile or compile_v0.
include/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gcc-interface.h (enum gcc_base_api_version): Add
GCC_FE_VERSION_1.
(struct gcc_base_vtable): Rename compile to compile_v0. Update
comment for compile. New methods set_verbose and compile.
Add new note types available since Linux 4.8 to elf/common.h and
make the 'readelf' tool aware of it.
include/
* elf/common.h (NT_PPC_TAR): New macro.
(NT_PPC_PPR): Likewise.
(NT_PPC_DSCR): Likewise.
(NT_PPC_EBB): Likewise.
(NT_PPC_PMU): Likewise.
(NT_PPC_TM_CGPR): Likewise.
(NT_PPC_TM_CFPR): Likewise.
(NT_PPC_TM_CVMX): Likewise.
(NT_PPC_TM_CVSX): Likewise.
(NT_PPC_TM_SPR): Likewise.
(NT_PPC_TM_CTAR): Likewise.
(NT_PPC_TM_CPPR): Likewise.
(NT_PPC_TM_CDSCR): Likewise.
binutils/
* readelf.c (get_note_type): Handle PPC note types available
since Linux 4.8.
When --no-define-common is used to build shared library, treat common
symbol as undefined so that common symbols that are referenced from a
shared library to be assigned addresses only in the main program. This
eliminates the unused duplicate space in the shared library, and also
prevents any possible confusion over resolving to the wrong duplicate
when there are many dynamic modules with specialized search paths for
runtime symbol resolution.
--no-define-common is only allowed when building a shared library.
bfd/
PR ld/21903:
* elflink.c (elf_link_add_object_symbols): Treat common symbol
as undefined for --no-define-common.
include/
PR ld/21903:
* bfdlink.h (bfd_link_info): Add inhibit_common_definition.
ld/
PR ld/21903:
* ld.h (command_line): Remove inhibit_common_definition.
* ldgram.y: Replace command_line.inhibit_common_definition with
link_info.inhibit_common_definition.
* ldlang.c (lang_common): Likewise.
* lexsup.c (parse_args): Likewise.
* ldmain.c (main): Only allow --no-define-common with -shared.
* testsuite/ld-elf/pr21903.s: New file.
* testsuite/ld-elf/pr21903a.d: Likewise.
* testsuite/ld-elf/pr21903b.d: Likewise.
* testsuite/ld-elf/pr21903c.d: Likewise.
* testsuite/ld-elf/pr21903d.d: Likewise.
* testsuite/ld-elf/pr21903e.d: Likewise.
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
When elf section size is beyond unsigned int max value, objdump fails
to disassemble from that section. Ex on PowerPC,
$ objdump -h /proc/kcore
Idx Name Size VMA
4 load2 100000000 c000000000000000
Here, size of load2 section is 0x100000000. Also note that, 0xc00....
address range is kernel space for PowerPC. Now let's try to disassemble
do_sys_open() using /proc/kcore.
$ cat /proc/kallsyms | grep -A1 -w do_sys_open
c00000000036c000 T do_sys_open
c00000000036c2d0 T SyS_open
Before patch:
$ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore
/proc/kcore: file format elf64-powerpcle
Disassembly of section load2:
c00000000036c000 <load2+0x36c000>:
c00000000036c000: Address 0xc00000000036c000 is out of bounds.
Fix this by changing type of 'buffer_length' from unsigned int to
size_t. After patch:
$ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore
/proc/kcore: file format elf64-powerpcle
Disassembly of section load2:
c00000000036c000 <load2+0x36c000>:
c00000000036c000: fc 00 4c 3c addis r2,r12,252
c00000000036c004: 00 53 42 38 addi r2,r2,21248
c00000000036c008: a6 02 08 7c mflr r0
include/
* dis-asm.h (struct disassemble_info): Change type of buffer_length
field to size_t.
opcodes/
* dis-buf.c (buffer_read_memory): Change type of end_addr_offset,
max_addr_offset and octets variables to size_t.
This core dump note contains the same information returned by the
ptrace PT_LWPINFO operation for each LWP belonging to a process.
binutils/ChangeLog:
* readelf.c (get_freebsd_elfcore_note_type): Handle
NT_FREEBSD_PTLWPINFO.
include/ChangeLog:
* elf/common.h (NT_FREEBSD_PTLWPINFO): Define.
PR gas/21683
include * opcode/avr.h (AVR_INSN): Add one for __gcc_isr.
gas * doc/c-avr.texi (AVR Options) <-mgcc-isr>: Document it.
(AVR Pseudo Instructions): New node.
* config/tc-avr.h (md_pre_output_hook): Define to avr_pre_output_hook.
(md_undefined_symbol): Define to avr_undefined_symbol.
(avr_pre_output_hook, avr_undefined_symbol): New protos.
* config/tc-avr.c (struc-symbol.h): Include it.
(ISR_CHUNK_Done, ISR_CHUNK_Prologue, ISR_CHUNK_Epilogue): New enums.
(avr_isr, avr_gccisr_opcode)
(avr_no_sreg_hash, avr_no_sreg): New static variables.
(avr_opt_s) <have_gccisr>: Add field.
(avr_opt): Add initializer for have_gccisr.
(enum options) <OPTION_HAVE_GCCISR>: Add enum.
(md_longopts) <"mgcc-isr">: Add entry.
(md_show_usage): Document -mgcc-isr.
(md_parse_option) [OPTION_HAVE_GCCISR]: Handle it.
(md_undefined_symbol): Remove.
(avr_undefined_symbol, avr_pre_output_hook): New fuctions.
(md_begin) <avr_no_sreg_hash, avr_gccisr_opcode>: Initialize them.
(avr_operand) <pregno>: Add argument and set *pregno if function
is called for a register constraint.
[N]: Handle constraint.
(avr_operands) <avr_operand>: Pass 5th parameter to calls.
[avr_opt.have_gccisr]: Call avr_update_gccisr. Call
avr_gccisr_operands instead of avr_operands.
(avr_update_gccisr, avr_emit_insn, avr_patch_gccisr_frag)
(avr_gccisr_operands, avr_check_gccisr_done): New static functions.
* testsuite/gas/avr/gccisr-01.d: New test.
* testsuite/gas/avr/gccisr-01.s: New test.
* testsuite/gas/avr/gccisr-02.d: New test.
* testsuite/gas/avr/gccisr-02.s: New test.
* testsuite/gas/avr/gccisr-03.d: New test.
* testsuite/gas/avr/gccisr-03.s: New test.
Correct a commit 7d64c587c1 ("Add support for the MIPS eXtended
Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization
ASE instructions to be wrongly always enabled with the selection of the
MIPS32r2 or higher ISA.
For example this source assembles successfully as shown below:
$ cat xpa.s
mfhc0 $2, $1
$ as -32 -mips32 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1'
$ as -32 -mips32r2 -o xpa.o xpa.s
$ objdump -d xpa.o
xpa.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: 40420800 mfhc0 v0,c0_random
...
$
To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA
instructions in the opcode table. Additionally, for XPA Virtualization
ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag
and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA).
Now the same source is correctly rejected unless the `-mxpa' option is
also used:
$ as -32 -mips32r2 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1'
$ as -32 -mips32r2 -mxpa -o xpa.o xpa.s
$
Add test cases for XPA base and XPA Virtualization ASE instructions.
Parts of this change by Andrew Bennett.
include/
* opcode/mips.h (ASE_XPA_VIRT): New macro.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Handle the
ASE_XPA_VIRT flag.
(parse_mips_ase_option): New function.
(parse_mips_dis_option): Factor out ASE option handling to the
new function. Call `mips_calculate_combination_ases'.
* mips-opc.c (XPAVZ): New macro.
(mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0",
"mfhgc0", "mthc0" and "mthgc0".
gas/
* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
flags. Add `-mvirt' to `as' flags.
* testsuite/gas/mips/xpa-err.d: New test.
* testsuite/gas/mips/xpa-virt-err.d: New test.
* testsuite/gas/mips/xpa-err.l: New stderr output.
* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
* testsuite/gas/mips/xpa-err.s: New test source.
* testsuite/gas/mips/xpa-virt-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility: NT_S390_GS_CB, the
"guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage
broadcast control block". This patch adds support for the respective core
notes sections to binutils.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype.
(elfcore_write_s390_gs_bc): Likewise.
* elf.c (elfcore_grok_s390_gs_cb): New function.
(elfcore_grok_s390_gs_bc): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_gs_cb): New function.
(elfcore_write_s390_gs_bc): New function.
(elfcore_write_register_note): Call them.
binutils/ChangeLog:
* readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC.
include/ChangeLog:
* elf/common.h (NT_S390_GS_CB): New macro.
(NT_S390_GS_BC): Likewise.
This patch add assembler and disassembler support for new Dot Product
Extension.
The support can be enabled through the new "+dotprod" extension.
include/
* opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro.
(FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro.
gas/
* config/tc-arm.c (fpu_neon_ext_dotprod): New variable.
(neon_scalar_for_mul): Improve comments.
(do_neon_dotproduct): New function to encode Dot Product instructions.
(do_neon_dotproduct_s): Wrapper function for signed Dot Product
instructions.
(do_neon_dotproduct_u): Wrapper function for unsigned Dot Product
instructions.
(insns): New entries for vsdot and vudot.
(arm_extensions): New entry for "dotprod".
* doc/c-arm.texi: Document new "dotprod" extension.
* testsuite/gas/arm/dotprod.s: New test source.
* testsuite/gas/arm/dotprod-illegal.s: New test source.
* testsuite/gas/arm/dotprod.d: New test.
* testsuite/gas/arm/dotprod-thumb2.d: New test.
* testsuite/gas/arm/dotprod-illegal.d: New test.
* testsuite/gas/arm/dotprod-legacy-arch.d: New test.
* testsuite/gas/arm/dotprod-illegal.l: New error file.
* testsuite/gas/arm/dotprod-legacy-arch.l: New error file.
opcodes/
* arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.
bfd/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.
gas/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.
include/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in GAS:
instructions, build attributes and readelf.
=== Patch description ===
Although some differences exist for system registers, from GAS point of
view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state
and a subset of its extensions. This patch therefore introduce a new
feature bit to distinguish the availability of the pan, ras and rdma
extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd
extensions to be used by ARMv8-R.
Most of the changes are then in the testsuite to (i) rename source files
and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename
files with expected output for ARMv8-A build attributes and (iii) add
new files with expected output for ARMv8-R build attributes.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R.
gas/
* NEWS: Mention support for ARMv8-R architecture.
* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
(arm_extensions): Restrict pan, ras and rdma extension to
ARMv8-A and make crypto, fp and simd extensions available to
ARMv8-R.
(cpu_arch_ver): Add entry for ARMv8-R.
(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
logic.
* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
* testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+fp.d: New.
* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
* testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+simd.d: New.
* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1.
* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-bad.d: New.
* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
* testsuite/gas/arm/armv8-ar-barrier.s: This.
* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number
by 1.
* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-it-bad.d: New.
* testsuite/gas/arm/armv8-a.s: Rename into ...
* testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r.d: New.
* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
* testsuite/gas/arm/attr-march-armv8-r.d: New.
* testsuite/gas/arm/crc32.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar.s: This.
* testsuite/gas/arm/crc32.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble.
* testsuite/gas/arm/crc32-armv8-r.d: New.
* testsuite/gas/arm/crc32-bad.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
* testsuite/gas/arm/crc32-bad.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to
assemble.
* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
* testsuite/gas/arm/mask_1.s: Rename into ...
* testsuite/gas/arm/mask_1-armv8-ar.s: This.
* testsuite/gas/arm/mask_1.d: Rename into ...
* testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to
assemble.
* testsuite/gas/arm/mask_1-armv8-r.d: new.
include/
* elf/arm.h (TAG_CPU_ARCH_V8R): New macro.
* opcode/arm.h (ARM_EXT2_V8A): New macro.
(ARM_AEXT2_V8A): Rename into ...
(ARM_AEXT2_V8AR): This.
(ARM_AEXT2_V8A): New macro.
(ARM_AEXT_V8R): New macro.
(ARM_AEXT2_V8R): New macro.
(ARM_ARCH_V8R): New macro.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to remove special casing for ARMv6S-M
autodetection.
=== Motivation ===
Currently, SWI and SVC mnemonics are enabled for ARMv4T and successor
architectures with extra checks in the handler function (do_t_swi) to
give an error message when ARMv6-M is targeted and some more special
casing in aeabi_set_public_attributes. This was made to exclude these
mnemonics for ARMv6-M unless the OS extension is in use.
However this logic is superfluous: there is already code to check
whether an instruction is available based on the feature bit it is part
of and whether the targeted architecture has that feature bit. This
patch aims at removing that unneeded complexity.
=== Patch description ===
The OS extension is already limited to the ARMv6-M architecture so all
this patch does is redefined availability of the ARM_EXT_OS feature bit
to not be present for ARM_ARCH_V6M. ARM_ARCH_V6SM does not need any
change either because it already includes ARM_EXT_OS.
The patch also make sure that the error message that was given by
do_t_swi when SWI/SVC is unavailable is still the same by detecting the
situation in md_assemble.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_ext_v6m): Delete.
(arm_ext_v7m): Delete.
(arm_ext_m): Remove ARM_EXT_OS from the set of feature defined M
profile.
(arm_arch_v6m_only): Delete.
(do_t_swi): Remove special case for ARMv6S-M.
(md_assemble): Display error message previously in do_t_swi when
SVC is not available.
(insns): Guard swi and svc by arm_ext_os for Thumb mode.
(aeabi_set_public_attributes): Remove special case for ARMv6S-M.
include/
* opcode/arm.h (ARM_AEXT_V4TxM): Add ARM_EXT_OS bit to the set.
(ARM_AEXT_V4T): Likewise.
(ARM_AEXT_V5TxM): Likewise.
(ARM_AEXT_V5T): Likewise.
(ARM_AEXT_V6M): Mask off ARM_EXT_OS bit.
This patch adds a new S/390 specific segment type: PT_S390_PGSTE. For
binaries marked with that segment the kernel will allocate 4k page
tables. The only user so far will be qemu.
ld/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* Makefile.in: Add s390.em as build dependency.
* emulparams/elf64_s390.sh (EXTRA_EM_FILE): Add s390.em.
* emultempl/s390.em: New file.
* gen-doc.texi: Add documentation for --s390-pgste option.
* ld.texinfo: Likewise.
include/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf/s390.h (PT_S390_PGSTE): Define macro.
binutils/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* readelf.c (get_s390_segment_type): Add support for the new
segment type PT_S390_PGSTE.
(get_segment_type): Call get_s390_segment_type.
elfcpp/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elfcpp.h (enum PT): Add PT_S390_PGSTE to enum.
bfd/ChangeLog:
2017-06-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf-s390.h: New file.
* elf64-s390.c (struct elf_s390_link_hash_table): Add params
field.
(elf_s390_additional_program_headers): New function.
(elf_s390_modify_segment_map): New function.
(bfd_elf_s390_set_options): New function.
(elf_backend_additional_program_headers)
(elf_backend_modify_segment_map): Add macro definitions.
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to rework the Tag_CPU_arch build attribute
value selection to (i) match architecture or CPU if specified by user
without any need for hack and (ii) match an architecture with all the
features used if in autodetection mode or return an error.
=== Motivation ===
Currently, Tag_CPU_arch build attribute value selection assumes that an
architecture is always a superset of architectures released earlier. As
such, the logic is to browse architectures in chronological order of
release and selecting the Tag_CPU_arch value of the last one to
contribute a feature used[1]/requested[2] not contributed by earlier
architectures.
[1] in case of autodetection mode
[2] otherwise, ie. in case of -mcpu/-march or associated directives
This logic fails the two objectives mentionned in the Context section.
First, due to the assumption it does an architecture can be selected
while not having all the features used/requested which fails the second
objective. Second, not doing an exact match when an architecture or CPU
is selected by the user means the wrong value is chosen when a later
architecture provides a subset of the feature bits of an earlier
architecture. This is the case for the implementation of ARMv8-R (see
later patch).
An added benefit of this patch is that it is possible to easily generate
more consistent build attribute by setting the feature bits from the
architecture matched in aeabi_set_public_attributes in autodetection
mode. This is better done as a separate patch because lots of testcase'
expected results must then be updated accordingly.
=== Patch description ===
The patch changes the main logic for Tag_CPU_arch and
Tag_CPU_arch_profile
values selection to:
- look for an exact match in case an architecture or CPU was specified
on the command line or in a directive
- select the first released architecture that provides a superset of the
feature used in the autodetection case
- select the most featureful architecture in case of -march=all
The array cpu_arch_ver is updated to include all architectures in order
to make the first point work.
Note that when looking for an exact match, the architecture with
selected extension is tried first and then only the architecture. This
is because some architectures are exactly equivalent to an earlier
architecture with its extensions selected. ARMv6S-M (= ARMv6-M + OS
extension) and ARMv6KZ (ARMv6K + security extension) are two such
examples.
Other adjustments are also necessary in aeabi_set_public_attributes to
make this change work.
1) The logic to set Tag_ARM_ISA_use and Tag_THUMB_ISA_use must check the
absence of feature bit used/requested to decide whether to give the
default value for empty files (see EABI attribute defaults test). It was
previously checking that arch == 0 which would only happen if no feature
bit could be matched by any architecture, ie there is no feature bit to
match.
2) A fallback to a superset match must exist when no_cpu_selected ()
returns true. This is because aeabi_set_public_attributes is called
again after relaxation and at this point selected_cpu is set from the
previous execution of that function. There is therefore no way to check
whether the user specified an architecture or CPU.
3) Tag_CPU_arch lines are removed from expected output when the
detected architecture should be pre-ARMv4, since 0 is the Tag_CPU_arch
value for pre-ARMv4 architectures and default value for an absent entry
is 0.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (fpu_any): Defined from FPU_ANY.
(cpu_arch_ver): Add all architectures and sort by release date.
(have_ext_for_needed_feat_p): New.
(get_aeabi_cpu_arch_from_fset): New.
(aeabi_set_public_attributes): Call above function to determine
Tag_CPU_arch and Tag_CPU_arch_profile values. Adapt Tag_ARM_ISA_use
and Tag_THUMB_ISA_use selection logic to check absence of feature bit
accordingly.
* testsuite/gas/arm/attr-march-armv1.d: Fix expected Tag_CPU_arch build
attribute value.
* testsuite/gas/arm/attr-march-armv2.d: Likewise.
* testsuite/gas/arm/attr-march-armv2a.d: Likewise.
* testsuite/gas/arm/attr-march-armv2s.d: Likewise.
* testsuite/gas/arm/attr-march-armv3.d: Likewise.
* testsuite/gas/arm/attr-march-armv3m.d: Likewise.
* testsuite/gas/arm/pr12198-2.d: Likewise.
include/
* opcode/arm.h (FPU_ANY): New macro.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
This commit adds a new linker feature: the ability to resolve section
groups as part of a relocatable link.
Currently section groups are automatically resolved when performing a
final link, and are carried through when performing a relocatable link.
By carried through this means that one copy of each section group (from
all the copies that might be found in all the input files) is placed
into the output file. Sections that are part of a section group will
not match input section specifiers within a linker script and are
forcibly kept as separate sections.
There is a slight resemblance between section groups and common
section. Like section groups, common sections are carried through when
performing a relocatable link, and resolved (allocated actual space)
only at final link time.
However, with common sections there is an ability to force the linker to
allocate space for the common sections when performing a relocatable
link, there's currently no such ability for section groups.
This commit adds such a mechanism. This new facility can be accessed in
two ways, first there's a command line switch --force-group-allocation,
second, there's a new linker script command FORCE_GROUP_ALLOCATION. If
one of these is used when performing a relocatable link then the linker
will resolve the section groups as though it were performing a final
link, the section group will be deleted, and the members of the group
will be placed like normal input sections. If there are multiple copies
of the group (from multiple input files) then only one copy of the group
members will be placed, the duplicate copies will be discarded.
Unlike common sections that have the --no-define-common command line
flag, and INHIBIT_COMMON_ALLOCATION linker script command there is no
way to prevent group resolution during a final link, this is because the
ELF gABI specifically prohibits the presence of SHT_GROUP sections in a
fully linked executable. However, the code as written should make
adding such a feature trivial, setting the new resolve_section_groups
flag to false during a final link should work as you'd expect.
bfd/ChangeLog:
* elf.c (_bfd_elf_make_section_from_shdr): Don't initially mark
SEC_GROUP sections as SEC_EXCLUDE.
(bfd_elf_set_group_contents): Replace use of abort with an assert.
(assign_section_numbers): Use resolve_section_groups flag instead
of relocatable link type.
(_bfd_elf_init_private_section_data): Use resolve_section_groups
flag instead of checking the final_link flag for part of the
checks in here. Fix white space as a result.
* elflink.c (elf_link_input_bfd): Use resolve_section_groups flag
instead of relocatable link type.
(bfd_elf_final_link): Likewise.
include/ChangeLog:
* bfdlink.h (struct bfd_link_info): Add new resolve_section_groups
flag.
ld/ChangeLog:
* ld.h (struct args_type): Add force_group_allocation field.
* ldgram.y: Add support for FORCE_GROUP_ALLOCATION.
* ldlex.h: Likewise.
* ldlex.l: Likewise.
* lexsup.c: Likewise.
* ldlang.c (unique_section_p): Check resolve_section_groups flag
not the relaxable link flag.
(lang_add_section): Discard section groups when we're resolving
groups. Clear the SEC_LINK_ONCE flag if we're resolving section
groups.
* ldmain.c (main): Initialise resolve_section_groups flag in
link_info based on command line flags.
* testsuite/ld-elf/group11.d: New file.
* testsuite/ld-elf/group12.d: New file.
* testsuite/ld-elf/group12.ld: New file.
* NEWS: Mention new features.
* ld.texinfo (Options): Document --force-group-allocation.
(Miscellaneous Commands): Document FORCE_GROUP_ALLOCATION.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, and that have no requirement on r2 or
r12, and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions. The
optimization is attractive. The TOC pointer load-hit-store is a major
reason why calls to small functions that need no register saves, or
with shrink-wrap, no register saves on a fast path, are slow on
powerpc64le.
To be safe, this optimization needs ld.so support to check that the
run-time matches link-time function implementation. If a function
in a shared library with st_other localentry non-zero is called
without saving and restoring r2, r2 will be trashed on return, leading
to segfaults. For that reason the optimization does not happen for
weak functions since a weak definition is a fairly solid hint that the
function will likely be overridden. I'm also not enabling the
optimization by default unless glibc-2.26 is detected, which should
have the ld.so checks implemented.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add has_plt_localentry0.
(ppc64_elf_merge_symbol_attribute): Merge localentry bits from
dynamic objects.
(is_elfv2_localentry0): New function.
(ppc64_elf_tls_setup): Default params->plt_localentry0.
(plt_stub_size): Adjust size for tls_get_addr_opt stub.
(build_tls_get_addr_stub): Use a simpler stub when r2 is not saved.
(ppc64_elf_size_stubs): Leave stub_type as ppc_stub_plt_call for
optimized localentry:0 stubs.
(ppc64_elf_build_stubs): Save r2 in ELFv2 __glink_PLTresolve.
(ppc64_elf_relocate_section): Leave nop unchanged for optimized
localentry:0 stubs.
(ppc64_elf_finish_dynamic_sections): Set PPC64_OPT_LOCALENTRY in
DT_PPC64_OPT.
* elf64-ppc.h (struct ppc64_elf_params): Add plt_localentry0.
include/
* elf/ppc64.h (PPC64_OPT_LOCALENTRY): Define.
ld/
* emultempl/ppc64elf.em (params): Init plt_localentry0 field.
(enum ppc64_opt): New, replacing OPTION_* defines. Add
OPTION_PLT_LOCALENTRY, and OPTION_NO_PLT_LOCALENTRY.
(PARSE_AND_LIST_*): Support --plt-localentry and --no-plt-localentry.
* testsuite/ld-powerpc/elfv2so.d: Update.
* testsuite/ld-powerpc/powerpc.exp (TLS opt 5): Use --no-plt-localentry.
* testsuite/ld-powerpc/tlsopt5.d: Update.
This patch extracts ARC CPU definitions from gas/config/tc-arc.c (cpu_types)
into a separate file arc-cpu.def. This will allow reuse of CPU type definition
in multiple places where it might be needed, for example in disassembler. This
will help ensure that gas and disassembker use same option values for CPUs.
arc-cpu.def file relies on preprocessor macroses which are defined somewhere
else. This for example multiple C files to include arc-cpu.def, but define
different macroses, therefore creating different structures.
include/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* elf/arc-cpu.def: New file.
gas/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* config/tc-arc.c (cpu_types): Include arc-cpu.def
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
So far we only had an instruction flag which made an arbitrary number
of operands optional. This limits error checking capabilities for
instructions marked that way. With this patch the optparm flag only
allows a single optional parameter and another one is added (optparm2)
allowing 2 optional arguments. Hopefully we won't need more than that
in the future. So far there will be only a single use of optparm2.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Support new optparm2
instruction flag.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Add new instruction flags optparm2.
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-dis.c (s390_print_insn_with_opcode): Support new optparm2
instruction flag.
* s390-mkopc.c (main): Recognize the new instruction flag when
parsing instruction list.
The per operand optional flag hasn't been used for quite some time.
Cleanup some remains.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Remove S390_OPERAND_OPTIONAL.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Remove code dealing with
S390_OPERAND_OPTIONAL.
Nowadays, opcodes/disassemble.c:disassembler selects the proper
disassembler according to ABFD only. However, it actually
selects disassemblers according to arch, mach, endianess, and
abfd. This patch adds them to the parameters of disassembler,
so that its caller can still select disassemblers in case that
abfd is NULL (a typical case in GDB).
There isn't any functionality change.
binutils:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* objdump.c (disassemble_data): Caller update.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (disassembler): Update declaration.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* disassemble.c (disassembler): Add arguments a, big and mach.
Use them.
sim/common:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* sim-trace.c (trace_disasm): Caller update.
It is required to parse instructions like ldb.x.a.di.
include/
2017-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (MAX_INSN_FLGS): Update to 4.
dynamic_ref_after_ir_def is a little odd compared to other symbol
flags in that as the name suggests, it is set only for certain
references after a definition. It turns out that setting a flag for
any non-ir reference from a dynamic object can be used to solve the
problem for which this flag was invented, which I think is a cleaner.
This patch does that, and sets non_ir_ref only for regular object
references.
include/
* bfdlink.h (struct bfd_link_hash_entry): Update non_ir_ref
comment. Rename dynamic_ref_after_ir_def to non_ir_ref_dynamic.
ld/
* plugin.c (is_visible_from_outside): Use non_ir_ref_dynamic.
(plugin_notice): Set non_ir_ref for references from regular
objects, non_ir_ref_dynamic for references from dynamic objects.
bfd/
* elf64-ppc.c (add_symbol_adjust): Transfer non_ir_ref_dynamic.
* elflink.c (elf_link_add_object_symbols): Update to use
non_ir_ref_dynamic.
(elf_link_input_bfd): Test non_ir_ref_dynamic in addition to
non_ir_ref.
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
We need to make an IR symbol visible if it is defined in an IR object
and referenced in a dynamic object. When --as-needed is used, since
linker removes the IR symbol reference of the dynamic object if the
dynamic object isn't needed in the first pass, the IR definition isn't
visible to the dynamic object even if the dynamic object becomes needed
in the second pass. Add dynamic_ref_after_ir_def to bfd_link_hash_entry
to track IR symbol which is defined in an IR object and later referenced
in a dynamic object. dynamic_ref_after_ir_def is preserved when restoring
the symbol table for unneeded dynamic object.
bfd/
PR ld/21382
* elflink.c (elf_link_add_object_symbols): Preserve
dynamic_ref_after_ir_def when restoring the symbol table for
unneeded dynamic object.
include/
PR ld/21382
* bfdlink.h (bfd_link_hash_entry): Add dynamic_ref_after_ir_def.
ld/
PR ld/21382
* plugin.c (is_visible_from_outside): Symbol may be visible
from outside if dynamic_ref_after_ir_def is set.
(plugin_notice): Set dynamic_ref_after_ir_def if the symbol is
defined in an IR object and referenced in a dynamic object.
* testsuite/ld-plugin/lto.exp: Run PR ld/21382 tests.
* testsuite/ld-plugin/pr21382a.c: New file.
* testsuite/ld-plugin/pr21382b.c: Likewise.
-z nodynamic-undefined-weak is only implemented for x86. (The sparc
backend has some support code but doesn't enable the option by
including ld/emulparams/dynamic_undefined_weak.sh, and since the
support looks like it may be broken I haven't enabled it.) This patch
adds the complementary -z dynamic-undefined-weak, extends both options
to affect building of shared libraries as well as executables, and
adds support for the option on powerpc.
include/
* bfdlink.h (struct bfd_link_info <dynamic_undefined_weak>):
Revise comment.
bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Hide undefweak
or make dynamic for info->dynamic_undefined_weak 0 and 1.
* elf32-ppc.c:Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard undef dyn_relocs when
not default visibility. Discard undef and undefweak
dyn_relocs earlier.
(ppc_elf_relocate_section): Adjust to suit.
* elf64-ppc.c: Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard them earlier.
ld/
* ld.texinfo (dynamic-undefined-weak): Document.
(nodynamic-undefined-weak): Document that this option now can
be used with shared libs.
* emulparams/dynamic_undefined_weak.sh: Support -z
dynamic-undefined-weak.
* emulparams/elf32ppccommon.sh: Include dynamic_undefined_weak.sh.
* testsuite/ld-undefined/weak-undef.exp (undef_weak_so),
(undef_weak_exe): New. Use them. Add -z dynamic-undefined-weak
and -z nodynamic-undefined-weak tests.
* Makefile.am: Update powerpc dependencies.
* Makefile.in: Regenerate.
PPC_OPCODE_* renumbered to fill the gaps left by previous patches,
and reordered chronologically just because. I kept PPC_OPCODE_TMR
because presumably it might be used in future APUinfo for e6500.
include/
* opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically.
(PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo.
opcodes/
* ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500.
* ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now
unnecessary E6500.
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9.
Defining the VSX2 and VSX3 selection based on cpu bits also lets the
assembler/disassembler distinguish between the power7 VSX opcodes and
the power8 ones. Note that this change means -mvsx now reverts back
to just adding the power7 VSX insns.
include/
* opcode/ppc.h (PPC_OPCODE_VSX3): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3.
* ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8.
(PPCVSX3): Define as PPC_OPCODE_POWER9.
This bit is worse than useless. Using it prevents the assembler and
disassembler distinguishing between opcodes added for power8 and those
added for power9.
include/
* opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2.
* ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500.
(PPCVEC3): Define as PPC_OPCODE_POWER9.
include * dis-asm.h: Add prototypes for wasm32 disassembler.
opcodes * Makefile.am: Add wasm32-dis.c.
* configure.ac: Add wasm32-dis.c to wasm32 target.
* disassemble.c: Add wasm32 disassembler code.
* wasm32-dis.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler
changes.
* testsuite/gas/wasm32/disass.d: New test.
* testsuite/gas/wasm32/disass.s: New test.
* testsuite/gas/wasm32/disass-2.d: New test.
* testsuite/gas/wasm32/disass-2.s: New test.
* testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc
names.
* testsuite/gas/wasm32/reloc.s: Update test for changed assembler
syntax.
* testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn
test to succeed.
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
We missed a "_gp" when changing the GP symbol. To make sure that
doesn't happen again, we now use the same definition everywhere (thanks,
Nick).
include/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elf/riscv.h (RISCV_GP_SYMBOL): New define.
bfd/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (GP_NAME): Delete.
(riscv_global_pointer_value): Change GP_NAME to RISCV_GP_SYMBOL.
(_bfd_riscv_relax_lui): Likewise.
opcodes/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-dis.c (riscv_disassemble_insn): Change "_gp" to
RISCV_GP_SYMBOL.
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
include * elf/wasm32.h: New file to support wasm32 architecture.
bfd * cpu-wasm32.c: New file to support wasm32 architecture.
* elf32-wasm32.c: New file to support wasm32 architecture.
* Makefile.am: Add wasm32 architecture.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
This patch removes the vx2 facility flag. It will not be used by GCC
and was a misnomer anyway.
Committed to mainline and 2.28 branch.
include/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (S390_INSTR_FLAG_VX2): Remove.
(S390_INSTR_FLAG_FACILITY_MASK): Adjust value.
gas/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Remove S390_INSTR_FLAG_VX2
from cpu_table. Remove vx2, and novx2 from cpu_flags.
opcodes/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Remove vx2 check.
* s390-opc.txt: Remove vx2 instruction flags.
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
include * elf/common.h (GNU_BUILD_ATTRIBUTE_SHORT_ENUM): New GNU BUILD
note type.
binutils * readelf.c (print_gnu_build_attribute_name): Add support for
GNU_BUILD_ATTRIBUTE_SHORT_ENUM.
Max Filippov
H.J. Lu
edlinger
Peter Bergner
Jim Wilson
John Darrington
Tamar Christina
Francois H. Theron
Alan Modra
Christophe Lyon
Michael Eager
Renlin Li
Nick Clifton
Thomas Preud'homme
Sriraman Tallam
Maciej W. Rozycki
Zebediah Figura
Joel Brobecker
Stephen Crane
Simon Marchi
Jan Beulich
Jiong Wang
Palmer Dabbelt
Siddhesh Poyarekar
James Bowman
Andrew Waterman
James Bowman
John Baldwin
Alexandre Oliva
Pedro Alves
Kuan-Lin Chen
Alexander Fedotov-B55613
Alexander Fedotov
Jan Kratochvil
Gustavo Romero
Claudiu Zissulescu
John Eric Martin
Yuri Chornovian
Ravi Bangoria
Georg-Johann Lay
Maciej W. Rozycki
Andreas Arnez
Kuan-Lin Chen
Andreas Krebbel
Yao Qi
Andrew Burgess
Eli Zaretskii
Anton Kolesov
Jose E. Marchesi
John David Anglin
Pip Cet
Rinat Zelig