Although the 'eabi' field is only used in user emulation where
CPU reset doesn't occur, it doesn't belong to the area to reset.
Move it after the 'end_reset_fields' for consistency.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv()
are only used for system emulation in m_helper.c.
Move the definitions to avoid prototype forward declarations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Failure to truncate the inputs results in garbage for the carry-out.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1373
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230115012103.3131796-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When ADCX is followed by ADOX or vice versa, the second instruction's
carry comes from EFLAGS and the condition codes use the CC_OP_ADCOX
operation. Retrieving the carry from EFLAGS is handled by this bit
of gen_ADCOX:
tcg_gen_extract_tl(carry_in, cpu_cc_src,
ctz32(cc_op == CC_OP_ADCX ? CC_C : CC_O), 1);
Unfortunately, in this case cc_op has been overwritten by the previous
"if" statement to CC_OP_ADCOX. This works by chance when the first
instruction is ADCX; however, if the first instruction is ADOX,
ADCX will incorrectly take its carry from OF instead of CF.
Fix by moving the computation of the new cc_op at the end of the function.
The included exhaustive test case fails without this patch and passes
afterwards.
Because ADCX/ADOX need not be invoked through the VEX prefix, this
regression bisects to commit 16fc5726a6 ("target/i386: reimplement
0x0f 0x38, add AVX", 2022-10-18). However, the mistake happened a
little earlier, when BMI instructions were rewritten using the new
decoder framework.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1471
Reported-by: Paul Jolly <https://gitlab.com/myitcv>
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We forgot to set cc_src, which is used for computing C.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1370
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114180601.2993644-1-richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were two problems here: not limiting the input to operand bits,
and not correctly handling large extraction length.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1372
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114230542.3116013-3-richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
we were sign extending the result of the load, while the instruction
clearly states that the result should be unsigned.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-10-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
if cpu_gpr_d[r3] == 0 then we were shifting the lower register to the
right by 32 which is undefined behaviour. In this case the TriCore would
do nothing an just return the higher register cpu_reg_d[r1]. We fixed
that by detecting whether cpu_gpr_d[r3] was zero and cleared the lower
register.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-8-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
if we used const16 == 0 we would crash qemu with the error:
../tcg/tcg-op.c:196: tcg_gen_shri_i32: Assertion `arg2 >= 0 && arg2 < 32' failed
This whole instruction can be handled by 'tcg_gen_extract2_tl' which
takes care of this special case as well.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-6-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
we were mixing up the "c" and "d" registers. We used "d" as a
destination register und "c" as the source. According to the TriCore ISA
manual 1.6 vol 2 it is the other way round.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653
Message-Id: <20230202120432.1268-4-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
we were mixing up the "c" and "d" registers. We used "d" as a
destination register und "c" as the source. According to the TriCore ISA
manual 1.6 vol 2 it is the other way round.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653
Message-Id: <20230202120432.1268-2-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-15-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Changes to standalone programs dropped, because these intentionally
don't use qemu/osdep.h:
target/hexagon/gen_dectree_import.c
target/hexagon/gen_semantics.c
target/hexagon/idef-parser/idef-parser.h
target/hexagon/idef-parser/parser-helpers.c
target/hexagon/idef-parser/parser-helpers.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-14-armbru@redhat.com>
Character must be returned via ret[0] field (copied to a0 by KVM).
Return value should be set to 0 to indicate successful processing.
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230203135155.12449-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to spec, ctzw should work with 32-bit register, not 64.
For example, previous implementation returns 33 for (1<<33) input
when the new one returns 32.
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230204082312.43557-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
commit fb3f3730e4 added mechanism to generate virtual instruction
exception during instruction decode when virt is enabled.
However in some situations, illegal instruction exception can be raised
due to state of CPU. One such situation is implementing branch tracking.
[1] An indirect branch if doesn't land on a landing pad instruction, then
cpu must raise an illegal instruction exception.
Implementation would raise such expcetion due to missing landing pad inst
and not due to decode. Thus DisasContext must have `virt_inst_excp`
initialized to false during DisasContxt initialization for TB.
[1] - https://github.com/riscv/riscv-cfi
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230127191758.755844-1-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadFmv ISA extension.
The patch uses the T-Head specific decoder and translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-14-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the T-Head C906 to the list of known CPUs.
Selecting this CPUs will automatically enable the available
ISA extensions of the CPUs (incl. vendor extensions).
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-13-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are no differences for floating point instructions in priv version 1.11
and 1.12. There is also no dependency for Zfh to priv version 1.12.
Therefore allow Zfh to be enabled for priv version 1.11.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-12-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head FMemIdx instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-11-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MemIdx instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-10-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MemPair instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MAC instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-8-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadCondMov ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-7-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBs ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-6-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBb ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-5-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBa ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-4-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadSync ISA extension.
The patch uses the T-Head specific decoder and translation.
The implementation introduces a helper to execute synchronization tasks:
helper_tlb_flush_all() performs a synchronized TLB flush on all CPUs.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadCmo ISA extension.
To avoid interfering with standard extensions, decoder and translation
are in its own xthead* specific files.
Future patches should be able to easily add additional T-Head extension.
The implementation does not have much functionality (besides accepting
the instructions and not qualifying them as illegal instructions if
the hart executes in the required privilege level for the instruction),
as QEMU does not model CPU caches and instructions are documented
to not raise any exceptions.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230131202013.2541053-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to privileged spec, if [sm]tval is written with a nonzero
value when a breakpoint exception occurs, then [sm]tval will contain
the faulting virtual address. Set tval to hit address when breakpoint
exception is triggered by hardware watchpoint.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230131170955.752743-1-geomatsi@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should call decode_save_opc() for all relevant instructions which
can potentially generate a virtual instruction fault or a guest page
fault because generating transformed instruction upon guest page fault
expects opcode to be available. Without this, hypervisor will see
transformed instruction as zero in htinst CSR for guest MMIO emulation
which makes MMIO emulation in hypervisor slow and also breaks nested
virtualization.
Fixes: a9814e3e08 ("target/riscv: Minimize the calls to decode_save_opc")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-5-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The time CSR will wrap-around immediately after reaching UINT64_MAX
so we don't need to re-start QEMU timer when timecmp == UINT64_MAX
in riscv_timer_write_timecmp().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-4-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Instead of clearing mask in riscv_cpu_update_mip() for VSTIP, we
should call riscv_cpu_update_mip() with mask == 0 from timer_helper.c
for VSTIP.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp suppor")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The htimedelta[h] CSR has impact on the VS timer comparison so we
should call riscv_timer_write_timecmp() whenever htimedelta changes.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp suppor")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
tcg: Add support for TCGv_i128 in cmpxchg.
tcg: Test CPUJumpCache in tb_jmp_cache_clear_page
tcg: Split out tcg_gen_nonatomic_cmpxchg_i{32,64}
tcg/aarch64: Fix patching of LDR in tb_target_set_jmp_target
target/arm: Use tcg_gen_atomic_cmpxchg_i128
target/i386: Use tcg_gen_atomic_cmpxchg_i128
target/i386: Use tcg_gen_nonatomic_cmpxchg_i{32,64}
target/s390x: Use tcg_gen_atomic_cmpxchg_i128
target/s390x: Use TCGv_i128 in passing and returning float128
target/s390x: Implement CC_OP_NZ in gen_op_calc_cc
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmPeiDYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+hFQf+K1MkEK1wtpjnqrYD
4l36Uo3B7w8Yi6FxbCx9NP78dJNNTjTn0zqhtISRKSzI7TGUCGnmQs40iqYrRe5S
9x6LJgTJplI2dsANvtsTaWB5gNzhowPt5tlit+J6Q0POwvvwcBZAOumY8AYt1YP+
dMsjBLw6HFaqSCU5IERZrB4kBwl61VTkTAtHL2utSZpdsOYoc3y2hzbJ/w3kLK2u
YXnMvom+Gc1rvQTaSMgiPYFITyx/VtXDe+JQwNikpu7Na+RFjtu7cHmg/BtZFo6s
15AsAS8JlENKAunpJiX41UR7SxB8MdyQL5LyjVNWo5F7+YgQuuO1gqYKt6qUwd+A
oH2uBA==
=xjMy
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230204' of https://gitlab.com/rth7680/qemu into staging
tcg: Add support for TCGv_i128 in parameters and returns.
tcg: Add support for TCGv_i128 in cmpxchg.
tcg: Test CPUJumpCache in tb_jmp_cache_clear_page
tcg: Split out tcg_gen_nonatomic_cmpxchg_i{32,64}
tcg/aarch64: Fix patching of LDR in tb_target_set_jmp_target
target/arm: Use tcg_gen_atomic_cmpxchg_i128
target/i386: Use tcg_gen_atomic_cmpxchg_i128
target/i386: Use tcg_gen_nonatomic_cmpxchg_i{32,64}
target/s390x: Use tcg_gen_atomic_cmpxchg_i128
target/s390x: Use TCGv_i128 in passing and returning float128
target/s390x: Implement CC_OP_NZ in gen_op_calc_cc
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmPeiDYdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+hFQf+K1MkEK1wtpjnqrYD
# 4l36Uo3B7w8Yi6FxbCx9NP78dJNNTjTn0zqhtISRKSzI7TGUCGnmQs40iqYrRe5S
# 9x6LJgTJplI2dsANvtsTaWB5gNzhowPt5tlit+J6Q0POwvvwcBZAOumY8AYt1YP+
# dMsjBLw6HFaqSCU5IERZrB4kBwl61VTkTAtHL2utSZpdsOYoc3y2hzbJ/w3kLK2u
# YXnMvom+Gc1rvQTaSMgiPYFITyx/VtXDe+JQwNikpu7Na+RFjtu7cHmg/BtZFo6s
# 15AsAS8JlENKAunpJiX41UR7SxB8MdyQL5LyjVNWo5F7+YgQuuO1gqYKt6qUwd+A
# oH2uBA==
# =xjMy
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 04 Feb 2023 16:30:46 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230204' of https://gitlab.com/rth7680/qemu: (40 commits)
tcg/aarch64: Fix patching of LDR in tb_target_set_jmp_target
target/i386: Inline cmpxchg16b
target/i386: Inline cmpxchg8b
target/i386: Split out gen_cmpxchg8b, gen_cmpxchg16b
target/s390x: Implement CC_OP_NZ in gen_op_calc_cc
target/s390x: Use tcg_gen_atomic_cmpxchg_i128 for CDSG
target/s390x: Use Int128 for passing float128
target/s390x: Use Int128 for returning float128
target/s390x: Copy wout_x1 to wout_x1_P
target/s390x: Use Int128 for return from TRE
target/s390x: Use Int128 for return from CKSM
target/s390x: Use Int128 for return from CLST
target/s390x: Use a single return for helper_divs64/u64
target/s390x: Use a single return for helper_divs32/u32
tests/tcg/s390x: Add cdsg.c
tests/tcg/s390x: Add long-double.c
tests/tcg/s390x: Add clst.c
tests/tcg/s390x: Add div.c
target/ppc: Use tcg_gen_atomic_cmpxchg_i128 for STQCX
target/arm: Use tcg_gen_atomic_cmpxchg_i128 for CASP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_gen_atomic_cmpxchg_i128 for the atomic case,
and tcg_gen_qemu_ld/st_i128 otherwise.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_gen_atomic_cmpxchg_i64 for the atomic case,
and tcg_gen_nonatomic_cmpxchg_i64 otherwise.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This case is trivial to implement inline.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make a copy of wout_x1 before modifying it, as wout_x1_P
emphasizing that it operates on the out/out2 pair. The insns
that use x1_P are data movement that will not change to Int128.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pack the quotient and remainder into a single Int128.
Use the divu128 primitive to remove the cpu_abort on
32-bit hosts.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Extended div test case to cover these insns.
Pack the quotient and remainder into a single uint64_t.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Fix operand ordering; use tcg_extr32_i64.
Note that the previous direct reference to reserve_val,
- tcg_gen_ld_i64(t1, cpu_env, (ctx->le_mode
- ? offsetof(CPUPPCState, reserve_val2)
- : offsetof(CPUPPCState, reserve_val)));
was incorrect because all references should have gone through
cpu_reserve_val. Create a cpu_reserve_val2 tcg temp to fix this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221112061122.2720163-2-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221112042555.2622152-3-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221112042555.2622152-2-richard.henderson@linaro.org>
FEAT_FGT also implements an extra trap bit in the MDCR_EL2 and
MDCR_EL3 registers: bit TDCC enables trapping of use of the Debug
Comms Channel registers OSDTRRX_EL1, OSDTRTX_EL1, MDCCSR_EL0,
MDCCINT_EL0, DBGDTR_EL0, DBGDTRRX_EL0 and DBGDTRTX_EL0 (and their
AArch32 equivalents). This trapping is independent of whether
fine-grained traps are enabled or not.
Implement these extra traps. (We don't implement DBGDTR_EL0,
DBGDTRRX_EL0 and DBGDTRTX_EL0.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-23-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-23-peter.maydell@linaro.org
Implement the HFGITR_EL2.SVC_EL0 and SVC_EL1 fine-grained traps.
These trap execution of the SVC instruction from AArch32 and AArch64.
(As usual, AArch32 can only trap from EL0, as fine grained traps are
disabled with an AArch32 EL1.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-22-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-22-peter.maydell@linaro.org
Implement the HFGITR_EL2.ERET fine-grained trap. This traps
execution from AArch64 EL1 of ERET, ERETAA and ERETAB. The trap is
reported with a syndrome value of 0x1a.
The trap must take precedence over a possible pointer-authentication
trap for ERETAA and ERETAB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-21-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-21-peter.maydell@linaro.org
Mark up the sysreg definitions for the system instructions
trapped by HFGITR bits 48..63.
Some of these bits are for trapping instructions which are
not in the system instruction encoding (i.e. which are
not handled by the ARMCPRegInfo mechanism):
* ERET, ERETAA, ERETAB
* SVC
We will have to handle those separately and manually.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-20-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-20-peter.maydell@linaro.org
Mark up the sysreg definitions for the system instructions
trapped by HFGITR bits 18..47. These bits cover TLBI
TLB maintenance instructions.
(If we implemented FEAT_XS we would need to trap some of the
instructions added by that feature using these bits; but we don't
yet, so will need to add the .fgt markup when we do.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-19-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-19-peter.maydell@linaro.org
Mark up the sysreg definitions for the system instructions
trapped by HFGITR bits 12..17. These bits cover AT address
translation instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-18-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-18-peter.maydell@linaro.org
Mark up the sysreg definitions for the system instructions
trapped by HFGITR bits 0..11. These bits cover various
cache maintenance operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-17-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-17-peter.maydell@linaro.org
Mark up the sysreg definitions for the registers trapped
by HDFGRTR/HDFGWTR bits 12..x.
Bits 12..22 and bit 58 are for PMU registers.
The remaining bits in HDFGRTR/HDFGWTR are for traps on
registers that are part of features we don't implement:
Bits 23..32 and 63 : FEAT_SPE
Bits 33..48 : FEAT_ETE
Bits 50..56 : FEAT_TRBE
Bits 59..61 : FEAT_BRBE
Bit 62 : FEAT_SPEv1p2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-16-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-16-peter.maydell@linaro.org
Mark up the sysreg definitons for the registers trapped
by HDFGRTR/HDFGWTR bits 0..11. These cover various debug
related registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-15-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-15-peter.maydell@linaro.org
Mark up the sysreg definitions for the registers trapped
by HFGRTR/HFGWTR bits 36..63.
Of these, some correspond to RAS registers which we implement as
always-UNDEF: these don't need any extra handling for FGT because the
UNDEF-to-EL1 always takes priority over any theoretical
FGT-trap-to-EL2.
Bit 50 (NACCDATA_EL1) is for the ACCDATA_EL1 register which is part
of the FEAT_LS64_ACCDATA feature which we don't yet implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-14-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-14-peter.maydell@linaro.org
Implement the machinery for fine-grained traps on normal sysregs.
Any sysreg with a fine-grained trap will set the new field to
indicate which FGT register bit it should trap on.
FGT traps only happen when an AArch64 EL2 enables them for
an AArch64 EL1. They therefore are only relevant for AArch32
cpregs when the cpreg can be accessed from EL0. The logic
in access_check_cp_reg() will check this, so it is safe to
add a .fgt marking to an ARM_CP_STATE_BOTH ARMCPRegInfo.
The DO_BIT and DO_REV_BIT macros define enum constants FGT_##bitname
which can be used to specify the FGT bit, eg
.fgt = FGT_AFSR0_EL1
(We assume that there is no bit name duplication across the FGT
registers, for brevity's sake.)
Subsequent commits will add the .fgt fields to the relevant register
definitions and define the FGT_nnn values for them.
Note that some of the FGT traps are for instructions that we don't
handle via the cpregs mechanisms (mostly these are instruction traps).
Those we will have to handle separately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-10-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-10-peter.maydell@linaro.org
Define the system registers which are provided by the
FEAT_FGT fine-grained trap architectural feature:
HFGRTR_EL2, HFGWTR_EL2, HDFGRTR_EL2, HDFGWTR_EL2, HFGITR_EL2
All these registers are a set of bit fields, where each bit is set
for a trap and clear to not trap on a particular system register
access. The R and W register pairs are for system registers,
allowing trapping to be done separately for reads and writes; the I
register is for system instructions where trapping is on instruction
execution.
The data storage in the CPU state struct is arranged as a set of
arrays rather than separate fields so that when we're looking up the
bits for a system register access we can just index into the array
rather than having to use a switch to select a named struct member.
The later FEAT_FGT2 will add extra elements to these arrays.
The field definitions for the new registers are in cpregs.h because
in practice the code that needs them is code that also needs
the cpregs information; cpu.h is included in a lot more files.
We're also going to add some FGT-specific definitions to cpregs.h
in the next commit.
We do not implement HAFGRTR_EL2, because we don't implement
FEAT_AMUv1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-9-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-9-peter.maydell@linaro.org
The HSTR_EL2 register is not supposed to have an effect unless EL2 is
enabled in the current security state. We weren't checking for this,
which meant that if the guest set up the HSTR_EL2 register we would
incorrectly trap even for accesses from Secure EL0 and EL1.
Add the missing checks. (Other places where we look at HSTR_EL2
for the not-in-v8A bits TTEE and TJDBX are already checking that
we are in NS EL0 or EL1, so there we alredy know EL2 is enabled.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-8-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-8-peter.maydell@linaro.org
The semantics of HSTR_EL2 require that it traps cpreg accesses
to EL2 for:
* EL1 accesses
* EL0 accesses, if the access is not UNDEFINED when the
trap bit is 0
(You can see this in the I_ZFGJP priority ordering, where HSTR_EL2
traps from EL1 to EL2 are priority 12, UNDEFs are priority 13, and
HSTR_EL2 traps from EL0 are priority 15.)
However, we don't get this right for EL1 accesses which UNDEF because
the register doesn't exist at all or because its ri->access bits
non-configurably forbid the access. At EL1, check for the HSTR_EL2
trap early, before either of these UNDEF reasons.
We have to retain the HSTR_EL2 check in access_check_cp_reg(),
because at EL0 any kind of UNDEF-to-EL1 (including "no such
register", "bad ri->access" and "ri->accessfn returns 'trap to EL1'")
takes precedence over the trap to EL2. But we only need to do that
check for EL0 now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230130182459.3309057-7-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-7-peter.maydell@linaro.org
The HSTR_EL2 register has a collection of trap bits which allow
trapping to EL2 for AArch32 EL0 or EL1 accesses to coprocessor
registers. The specification of these bits is that when the bit is
set we should trap
* EL1 accesses
* EL0 accesses, if the access is not UNDEFINED when the
trap bit is 0
In other words, all UNDEF traps from EL0 to EL1 take precedence over
the HSTR_EL2 trap to EL2. (Since this is all AArch32, the only kind
of trap-to-EL1 is the UNDEF.)
Our implementation doesn't quite get this right -- we check for traps
in the order:
* no such register
* ARMCPRegInfo::access bits
* HSTR_EL2 trap bits
* ARMCPRegInfo::accessfn
So UNDEFs that happen because of the access bits or because the
register doesn't exist at all correctly take priority over the
HSTR_EL2 trap, but where a register can UNDEF at EL0 because of the
accessfn we are incorrectly always taking the HSTR_EL2 trap. There
aren't many of these, but one example is the PMCR; if you look at the
access pseudocode for this register you can see that UNDEFs taken
because of the value of PMUSERENR.EN are checked before the HSTR_EL2
bit.
Rearrange helper_access_check_cp_reg() so that we always call the
accessfn, and use its return value if it indicates that the access
traps to EL0 rather than continuing to do the HSTR_EL2 check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-6-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-6-peter.maydell@linaro.org
Rearrange the code in do_coproc_insn() so that we calculate the
syndrome value for a potential trap early; we're about to add a
second check that wants this value earlier than where it is currently
determined.
(Specifically, a trap to EL2 because of HSTR_EL2 should take
priority over an UNDEF to EL1, even when the UNDEF is because
the register does not exist at all or because its ri->access
bits non-configurably fail the access. So the check we put in
for HSTR_EL2 trapping at EL1 (which needs the syndrome) is
going to have to be done before the check "is the ARMCPRegInfo
pointer NULL".)
This commit is just code motion; the change to HSTR_EL2
handling that will use the 'syndrome' variable is in a
subsequent commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-5-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-5-peter.maydell@linaro.org
We added the CPAccessResult values CP_ACCESS_TRAP_UNCATEGORIZED_EL2
and CP_ACCESS_TRAP_UNCATEGORIZED_EL3 purely in order to use them in
the ats_access() function, but doing so was incorrect (a bug fixed in
a previous commit). There aren't any cases where we want an access
function to be able to request a trap to EL2 or EL3 with a zero
syndrome value, so remove these enum values.
As well as cleaning up dead code, the motivation here is that
we'd like to implement fine-grained-trap handling in
helper_access_check_cp_reg(). Although the fine-grained traps
to EL2 are always lower priority than trap-to-same-EL and
higher priority than trap-to-EL3, they are in the middle of
various other kinds of trap-to-EL2. Knowing that a trap-to-EL2
must always for us have the same syndrome (ie that an access
function will return CP_ACCESS_TRAP_EL2 and there is no other
kind of trap-to-EL2 enum value) means we don't have to try
to choose which of the two syndrome values to report if the
access would trap to EL2 both for the fine-grained-trap and
because the access function requires it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-4-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-4-peter.maydell@linaro.org
The AArch32 ATS12NSO* address translation operations are supposed to
trap to either EL2 or EL3 if they're executed at Secure EL1 (which
can only happen if EL3 is AArch64). We implement this, but we got
the syndrome value wrong: like other traps to EL2 or EL3 on an
AArch32 cpreg access, they should report the 0x3 syndrome, not the
0x0 'uncategorized' syndrome. This is clear in the access pseudocode
for these instructions.
Fix the syndrome value for these operations by correcting the
returned value from the ats_access() function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-3-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-3-peter.maydell@linaro.org
The encodings 0,0,C7,C9,0 and 0,0,C7,C9,1 are AT SP1E1RP and AT
S1E1WP, but our ARMCPRegInfo definitions for them incorrectly name
them AT S1E1R and AT S1E1W (which are entirely different
instructions). Fix the names.
(This has no guest-visible effect as the names are for debug purposes
only.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Fuad Tabba <tabba@google.com>
Message-id: 20230130182459.3309057-2-peter.maydell@linaro.org
Message-id: 20230127175507.2895013-2-peter.maydell@linaro.org
We currently only support GICv2 emulation. To also support GICv3, we will
need to pass a few system registers into their respective handler functions.
This patch adds support for HVF to call into the TCG callbacks for GICv3
system register handlers. This is safe because the GICv3 TCG code is generic
as long as we limit ourselves to EL0 and EL1 - which are the only modes
supported by HVF.
To make sure nobody trips over that, we also annotate callbacks that don't
work in HVF mode, such as EL state change hooks.
With GICv3 support in place, we can run with more than 8 vCPUs.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20230128224459.70676-1-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In linux-user mode, 'bkpt' generates an EXP_DEBUG exception to allow
QEMU gdb server to intercept and manage the operation with an external
debugger.
In softmmu mode, the instruction must generate an illegal instruction
exception as it is on real hardware to be managed by the kernel.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1462
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230126125234.3186042-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The HAXM project has been retired (see https://github.com/intel/haxm#status),
so we should mark the code in QEMU as deprecated (and finally remove it
unless somebody else picks the project up again - which is quite unlikely
since there are now whpx and hvf on these operating systems, too).
Message-Id: <20230126121034.1035138-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Print both the raw field and the resolved pc-relative
address, as we do for branches.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While jirl shares the same instruction format as bne etc,
it is not assembled the same. In particular, rd is printed
first not second and the immediate is not pc-relative.
Decode into the arg_rr_i structure, which prints correctly.
This changes the "offs" member to "imm", to update translate.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reuse the decodetree based disassembler from
target/loongarch/ for tcg/loongarch64/.
The generation of decode-insns.c.inc into ./libcommon.fa.p/ could
eventually result in conflict, if any other host requires the same
trick, but this is good enough for now.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not encode the pointer as a constant in the opcode stream.
This pointer is specific to the cpu that first generated the
translation, which runs into problems with both hot-pluggable
cpus and user-only threads, as cpus are removed. It's also a
potential correctness issue in the theoretical case of a
slightly-heterogenous system, because if CPU 0 generates a
TB and then CPU 1 executes it, CPU 1 will end up using CPU 0's
hash table, which might have a wrong set of registers in it.
(All our current systems are either completely homogenous,
M-profile, or have CPUs sufficiently different that they
wouldn't be sharing TBs anyway because the differences would
show up in the TB flags, so the correctness issue is only
theoretical, not practical.)
Perform the lookup in either helper_access_check_cp_reg,
or a new helper_lookup_cp_reg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230106194451.1213153-3-richard.henderson@linaro.org
[PMM: added note in commit message about correctness issue]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ri == NULL case to the top of the function and return.
This allows the else to be removed and the code unindented.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230106194451.1213153-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qemu doesn't implement Debug Communication Channel, as well as the rest
of external debug interface. However, Microsoft Hyper-V in tries to
access some of those registers during an EL2 context switch.
Since there is no architectural way to not advertise support for external
debug, provide RAZ/WI stubs for OSDTRRX_EL1, OSDTRTX_EL1 and OSECCR_EL1
registers in the same way the rest of DCM is currently done. Do account
for access traps though with access_tda.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230120155929.32384-3-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture does not define any functionality for the CLAIM tag bits.
So we will just keep the raw bits, as per spec.
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230120155929.32384-2-eiakovlev@linux.microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In v7m_exception_taken(), for v8M we set the EXC_RETURN.ES bit if
either the exception targets Secure or if the CPU doesn't implement
the Security Extension. This is incorrect: the v8M Arm ARM specifies
that the ES bit should be RES0 if the Security Extension is not
implemented, and the pseudocode agrees.
Remove the incorrect condition, so that we leave the ES bit 0
if the Security Extension isn't implemented.
This doesn't have any guest-visible effects for our current set of
emulated CPUs, because all our v8M CPUs implement the Security
Extension; but it's worth fixing in case we add a v8M CPU without
the extension in future.
Reported-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Unify the two helper_set_pstate_{sm,za} in this function.
Do not call helper_* functions from svcr_write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230112102436.1913-8-philmd@linaro.org
Message-Id: <20230112004322.161330-1-richard.henderson@linaro.org>
[PMD: Split patch in multiple tiny steps]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BASEPRI, FAULTMASK, and their _NS equivalents only exist on devices with
the Main Extension. However, the MRS instruction did not check this,
and the MSR instruction handled it inconsistently (warning BASEPRI, but
silently ignoring writes to BASEPRI_NS). Unify this behavior and always
warn when reading or writing any of these registers if the extension is
not present.
Signed-off-by: David Reiss <dreiss@meta.com>
Message-id: 167330628518.10497.13100425787268927786-0@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a 64-bit register on AArch64, even if the high 44 bits
are RES0. Because this is defined as ARM_CP_STATE_BOTH, we are
asserting that the cpreg field is 64-bits.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1400
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230115171633.3171890-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
=ifFF
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for QEMU 8.0
* riscv_htif: Support console output via proxy syscall
* Cleanup firmware and device tree loading
* Fix elen check when using vector extensions
* add RISC-V OpenSBI boot test
* Ensure we always follow MISA parsing
* Fix up masking of vsip/vsie accesses
* Trap on writes to stimecmp from VS when hvictl.VTI=1
* Introduce helper_set_rounding_mode_chkfrm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmPKRP0ACgkQIeENKd+X
# cFTHTwgAkyRDxrLepvI0KNaT0+cUBh+3QFlJ5JRtVnDW+5R+3aGT72PTS7Migqoh
# H3IFCB2mcSdQvyjj2jDFlrFd0oVIaqE0+bnhouS/4nHB5S/vmapHi4Mc74Vv1CMB
# rgXScL+C5gDOH1I7XjqOb1FY5Vxqyhi3IzdIoj+0ysUrGmUkqx+ij/cfQL7jkH9Q
# slNAkorgwgrTgMgkJ5RKd4cjyv35O4XKLAsgixVTfJ+WcxKmc/zaJOkNM/UDnmxK
# k2+2P8bshZWtWscXbm3oMC5+2ow1QtFedEkhHqb4adkQIyolKL7P1TfMlCgMSvES
# BKl0DUhqQ+7F77tik3GPy9spQ6LpTQ==
# =ifFF
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Jan 2023 07:38:37 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230120' of https://github.com/alistair23/qemu: (37 commits)
hw/riscv/virt.c: move create_fw_cfg() back to virt_machine_init()
target/riscv: Remove helper_set_rod_rounding_mode
target/riscv: Introduce helper_set_rounding_mode_chkfrm
tcg/riscv: Use tcg_pcrel_diff in tcg_out_ldst
target/riscv: Trap on writes to stimecmp from VS when hvictl.VTI=1
target/riscv: Fix up masking of vsip/vsie accesses
hw/riscv: use ms->fdt in riscv_socket_fdt_write_distance_matrix()
hw/riscv: use MachineState::fdt in riscv_socket_fdt_write_id()
hw/riscv/virt.c: remove 'is_32_bit' param from create_fdt_socket_cpus()
hw/riscv/sifive_u.c: simplify create_fdt()
hw/riscv/virt.c: simplify create_fdt()
hw/riscv/spike.c: simplify create_fdt()
target/riscv: Use TARGET_FMT_lx for env->mhartid
target/riscv/cpu.c: do not skip misa logic in riscv_cpu_realize()
target/riscv/cpu: set cpu->cfg in register_cpu_props()
hw/riscv/boot.c: use MachineState in riscv_load_kernel()
hw/riscv/boot.c: use MachineState in riscv_load_initrd()
hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()
hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()
hw/riscv/spike.c: load initrd right after riscv_load_kernel()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit d7e2fe4aac.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
The only setting of RISCV_FRM_ROD is from the vector unit,
and now handled by helper_set_rounding_mode_chkfrm.
This helper is now unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230115160657.3169274-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The new helper always validates the contents of FRM, even
if the new rounding mode is not DYN. This is required by
the vector unit.
Track whether we've validated FRM separately from whether
we've updated fp_status with a given rounding mode, so that
we can elide calls correctly.
This partially reverts d6c4d3f2a6 which attempted the to do
the same thing, but with two calls to gen_set_rm(), which is
both inefficient and tickles an assertion in decode_save_opc.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1441
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230115160657.3169274-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Per the AIA specification, writes to stimecmp from VS level should
trap when hvictl.VTI is set since the write may cause vsip.STIP to
become unset.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp support")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221215224541.1423431-2-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current logic attempts to shift the VS-level bits into their correct
position in mip while leaving the remaining bits in-tact. This is both
pointless and likely incorrect since one would expect that any new, future
VS-level interrupts will get their own position in mip rather than sharing
with their (H)S-level equivalent. Fix this, and make the logic more
readable, by just making off the VS-level bits and shifting them into
position.
This also fixes reads of vsip, which would only ever report vsip.VSSIP
since the non-writable bits got masked off as well.
Fixes: d028ac7512 ("arget/riscv: Implement AIA CSRs for 64 local interrupts on RV32")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221215224541.1423431-1-abrestic@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
env->mhartid is currently casted to long before printed, which drops
the high 32-bit for rv64 on 32-bit host. Use TARGET_FMT_lx instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230109152655.340114-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All RISCV CPUs are setting cpu->cfg during their cpu_init() functions,
meaning that there's no reason to skip all the misa validation and setup
if misa_ext was set beforehand - especially since we're setting an
updated value in set_misa() in the end.
Put this code chunk into a new riscv_cpu_validate_set_extensions()
helper and always execute it regardless of what the board set in
env->misa_ext.
This will put more responsibility in how each board is going to init
their attributes and extensions if they're not using the defaults.
It'll also allow realize() to do its job looking only at the extensions
enabled per se, not corner cases that some CPUs might have, and we won't
have to change multiple code paths to fix or change how extensions work.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230113175230.473975-3-dbarboza@ventanamicro.com>
[ Changes by AF:
- Rebase
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is an informal contract between the cpu_init() functions and
riscv_cpu_realize(): if cpu->env.misa_ext is zero, assume that the
default settings were loaded via register_cpu_props() and do validations
to set env.misa_ext. If it's not zero, skip this whole process and
assume that the board somehow did everything.
At this moment, all SiFive CPUs are setting a non-zero misa_ext during
their cpu_init() and skipping a good chunk of riscv_cpu_realize(). This
causes problems when the code being skipped in riscv_cpu_realize()
contains fixes or assumptions that affects all CPUs, meaning that SiFive
CPUs are missing out.
To allow this code to not be skipped anymore, all the cpu->cfg.ext_*
attributes needs to be set during cpu_init() time. At this moment this
is being done in register_cpu_props(). The SiFive boards are setting
their own extensions during cpu_init() though, meaning that they don't
want all the defaults from register_cpu_props().
Let's move the contract between *_cpu_init() and riscv_cpu_realize() to
register_cpu_props(). Inside this function we'll check if
cpu->env.misa_ext was set and, if that's the case, set all relevant
cpu->cfg.ext_* attributes, and only that. Leave the 'misa_ext' = 0 case
as is today, i.e. loading all the defaults from riscv_cpu_extensions[].
register_cpu_props() can then be called by all the cpu_init() functions,
including the SiFive ones. This will make all CPUs behave more in line
with what riscv_cpu_realize() expects.
This will also make the cpu_init() functions even more alike, but at this
moment we would need some design changes in how we're initializing
extensions/attributes (e.g. some CPUs are setting cfg options after
register_cpu_props(), so we can't simply add the function to a common
post_init() hook) to make a common cpu_init() code across all CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230113175230.473975-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The elen check should be cpu->cfg.elen in range [8, 64].
Signed-off-by: Dongxue Zhang <elta.era@gmail.com>
Reviewed-by: LIU Zhiwei <zhiwe_liu@linux.alibaba.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <167236721596.15277.2653405273227256289-0@git.sr.ht>
[ Changes by AF:
- Tidy up commit message
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present for some unknown reason the HTIF registers (fromhost &
tohost) are defined in the RISC-V CPUArchState. It should really
be put in the HTIFState struct as it is only meaningful to HTIF.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221229091828.1945072-6-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
-----BEGIN PGP SIGNATURE-----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=oXX+
-----END PGP SIGNATURE-----
Merge tag 'mips-20230113' of https://github.com/philmd/qemu into staging
MIPS patches queue
A bunch of cleanups from various people.
- Improved GT64120 on big-endian hosts
- GT64120 north bridge and MC146818 RTC devices are now target independent
- Bonito64 north bridge converted to 3-phase reset API
- PCI refactors around PIIX devices
- Support for nanoMIPS in bootloader generator API
- New YAMON Malta Avocado test
- Removal of 'trap and emulate' KVM support
- System-specific QMP commands restricted to system emulation
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmPBekAACgkQ4+MsLN6t
# wN4wjxAAtYxyt6WUBpiYfV/LnbQFpAsacues1Vhy9MPYEg5a/iuXWKvWtgRYvGww
# qR0GVQH8rH7tgnCZK+ioq9jX+hvfBskP6CnKhxmb5zDGm7vP7jhhu8UFWY/EtBgq
# 0zpNeLMXtnRJ6PBqo/nWFCVtcpDRZ6IkSbpGWkVkciRFc5n/2VCnlIj8k2I1oMvL
# 11cp2xFQnaPReFXIpMjJHuHv1NObykdlvVg6wQo/A/4qIb8EvJQEPmePjG9Sf0i0
# v2dhnnxG9mze7+uq0dIC16x8Azko3N7dmtNlBU/aGb9OELwx35aux2M4dNDVogwn
# DqL/Wsk54TFewECOfS48t/a/TqV8j/ISW1d/JvovBrN2KovmIAbtqHuMUqKVk5l0
# 23ZOIIPIYwmScZwIlkCIGUuIzFig1zhEmQcoEQaFe/B0oLB2eN/x0Bk9Yklo+i2A
# WNiyiAj7k5492qEdndOySEEDVt6886F/+CdQ6QYF5Z1L/ELck7XHBH3mGDznWpPn
# 6IURyVquPJx7ul62jSGI+Gc+qakNoahIhPo5O7hklOM9GwWNOWXHveyb7xjs7j+O
# eWyVcet+o7hoHkCzmfbyTPySI4qCpF9fA42jqPhATwQPwmGXpbr+4BxUq3KtE43y
# w9tEigwd4voN3dWLItVh6QE4in70osz3XHp93byvo8bHlS0huVY=
# =oXX+
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 13 Jan 2023 15:35:28 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'mips-20230113' of https://github.com/philmd/qemu: (46 commits)
scripts/git.orderfile: Display MAINTAINERS changes first
target/mips: Restrict 'qapi-commands-machine.h' to system emulation
hw/mips/boston: Rename MachineState 'mc' pointer to 'ms'
hw/pci-host/bonito: Declare TYPE_BONITO_PCI_HOST_BRIDGE in header
hw/pci-host/bonito: Use 'bonito_pci' for PCI function #0 code
hw/pci-host/bonito: Use 'bonito_host' for PCI host bridge code
hw/pci-host/bonito: Convert to 3-phase reset
softmmu/rtc: Emit warning when using driftfix=slew on systems without mc146818
hw/rtc/mc146818rtc: Make the mc146818 RTC device target independent
hw/core/qdev-properties-system: Allow the 'slew' policy only on x86
hw/intc: Extract the IRQ counting functions into a separate file
hw/intc/i8259: Make using the isa_pic singleton more type-safe
hw/usb/hcd-uhci: Introduce TYPE_ defines for device models
hw/mips/Kconfig: Track Malta's PIIX dependencies via Kconfig
hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specific
hw/isa/piix3: Decouple INTx-to-LNKx routing which is board-specific
hw/pci/pci: Factor out pci_bus_map_irqs() from pci_bus_irqs()
hw/pci/pci_host: Trace config accesses on unexisting functions
mips: Always include nanomips disassembler
mips: Remove support for trap and emulate KVM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FPSR quotient byte should be set to the value of the quotient and not the
result. Manually calculate the quotient in the frem helper in round to nearest
even mode (note this is different from the quotient calculated internally for
fmod), and use it to set the quotient byte accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1314
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The FPSR quotient byte should be set to the value of the quotient and not the
result. Switch from using floatx80_mod() to floatx80_modrem() which returns
the quotient as a uint64_t which can be used for the quotient byte.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114232959.118224-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This enables the quotient parameter to be changed from int32_t to uint32_t and
also allows the extra sign logic in make_quotient() to be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230114232959.118224-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Extract the QMP functions from cpu.c (which is always compiled) to
the new 'sysemu/mips-qmp-cmds.c' unit (which is only compiled when
system emulation is selected).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219211034.70491-4-philmd@linaro.org>
Since the nanomips disassembler is not C++ code anymore, it need not
depend on link_language == cpp. Always include it and remove the
CONFIG_NANOMIPS_DIS symbol.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230110084942.299460-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit
to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu
uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3
write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is
enabled and exposed to the guest. As a result EL3 writes of that bit are
ignored.
Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com>
Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This support was limited to the Malta board, drop it.
I do not have a machine that can run VZ KVM, so I am assuming
that it works for -M malta as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221221091718.71844-1-philmd@linaro.org>
VRCPSS, VRSQRTSS and VCVTSx2Sx have a 32-bit or 64-bit memory operand,
which is represented in the decoding tables by X86_VEX_REPScalar. Add it
to the tables, and make validate_vex() handle the case of an instruction
that is in exception type 4 without the REP prefix and exception type 5
with it; this is the cas of VRCP and VRSQRT.
Reported-by: yongwoo <https://gitlab.com/yongwoo36>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1377
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid compilation errors when -Werror=maybe-uninitialized is used,
add a default case with g_assert_not_reached().
Otherwise with GCC 11.3.1 "cc (GCC) 11.3.1 20220421 (Red Hat 11.3.1-2)"
we get:
../target/i386/ops_sse.h: In function ‘helper_vpermdq_ymm’:
../target/i386/ops_sse.h:2495:13: error: ‘r3’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2495 | d->Q(3) = r3;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2494:13: error: ‘r2’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2494 | d->Q(2) = r2;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2493:13: error: ‘r1’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2493 | d->Q(1) = r1;
| ~~~~~~~~^~~~
../target/i386/ops_sse.h:2492:13: error: ‘r0’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
2492 | d->Q(0) = r0;
| ~~~~~~~~^~~~
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20221222140158.1260748-1-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When in 64-bit mode, IDT entiries are 16 bytes, so `intno * 16` is used
for base/limit/offset calculations. However, even in 64-bit mode, the
exception error code still uses bits [3,16) for the invlaid interrupt
index.
This means the error code should still be `intno * 8 + 2` even in 64-bit
mode.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1382
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
-----BEGIN PGP SIGNATURE-----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=D+Yw
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu into staging
* s390x header clean-ups from Philippe
* Rework and improvements of the EINTR handling by Nikita
* Deprecate the -no-hpet command line option
* Disable the qtests in the 32-bit Windows CI job again
* Some other misc fixes here and there
# gpg: Signature made Mon 09 Jan 2023 14:21:19 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu:
.gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job
error handling: Use RETRY_ON_EINTR() macro where applicable
Refactoring: refactor TFR() macro to RETRY_ON_EINTR()
docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst
i386: Deprecate the -no-hpet QEMU command line option
tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter
tests/readconfig: spice doesn't support unix socket on windows yet
target/s390x: Restrict sysemu/reset.h to system emulation
target/s390x/tcg/excp_helper: Restrict system headers to sysemu
target/s390x/tcg/misc_helper: Remove unused "memory.h" include
hw/s390x/pv: Restrict Protected Virtualization to sysemu
exec/memory: Expose memory_region_access_valid()
MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section
tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts
qemu-iotests/stream-under-throttle: do not shutdown QEMU
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In user emulation, threads -- implemented as CPU -- are
created/destroyed, but never reset. There is no point in
allowing the user emulation access the sysemu/reset API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221220145625.26392-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-6-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-5-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Protected Virtualization is irrelevant in user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217152454.96388-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmO3Ym0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNYmwf+LHEw+4T0fk1+2NfgIzH3+8s1EqDm
Ai56EjxO/p5NUptflXAnhn4P3LawswmmNE0ZIFFFBgwG5E9L+Jj/u5efuLu4uYPg
bboEBDn8nxSNN2l08u9TyS6kSWSxbwwrs7i2+V+4uQIlVIcCHu+A0vpXns4vWwY0
zZGF8CgJKDQdPIxdXrH8+6/xtadQ8uDkYsAWDiY/nhozCsCUTAZGTXWEQbHJLARI
Z4X+Cmz/NFB9G4ka6K/y0HbQw99KA8G/EMPUSglN0ya10yjpyzrmeI7IlIves+5U
8lhCZXyBhaV9GXlIK1vIgEXlHf83C19a+v0DpW0bpxK631n2VR5y3CArBg==
=2Koq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Atomic memslot updates for KVM (Emanuele, David)
* Always send errors to logfile when daemonized (Greg)
* Add support for IDE CompactFlash card (Lubomir)
* First round of build system cleanups (myself)
* First round of feature removals (myself)
* Reduce "qemu/accel.h" inclusion (Philippe)
# gpg: Signature made Thu 05 Jan 2023 23:51:09 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
i386: SGX: remove deprecated member of SGXInfo
target/i386: Add SGX aex-notify and EDECCSSA support
util: remove support -chardev tty and -chardev parport
util: remove support for hex numbers with a scaling suffix
KVM: remove support for kernel-irqchip=off
docs: do not talk about past removal as happening in the future
meson: accept relative symlinks in "meson introspect --installed" data
meson: cleanup compiler detection
meson: support meson 0.64 -Doptimization=plain
configure: test all warnings
tests/qapi-schema: remove Meson workaround
meson: cleanup dummy-cpus.c rules
meson: tweak hardening options for Windows
configure: remove backwards-compatibility and obsolete options
configure: preserve qemu-ga variables
configure: cleanup $cpu tests
configure: remove dead function
configure: remove useless write_c_skeleton
ide: Add "ide-cf" driver, a CompactFlash card
ide: Add 8-bit data mode
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmO3b5sACgkQIeENKd+X
cFTD8Af+L0OaGzE4C0jil7LdITFKk7ltdTg3yw84ZBvIxrEWMWlt5Yj3Ez5OIPbY
WpPmCLoJ9XM/5CV5PuPjxcFFExWjXLNeMEvaaT/3/3jPPnA/M/AbZa4hefKRluTg
kkvBiOuRMPXiYLki5xAHmjD/1j6SQ8ghylPLxYQqyGq87WZt4Dx9msOTZLVzmmYl
8y9oC8j6yO2UBZYC1TxSkKxFbj+Cp2HmtBZ09tDzwRL6DpRvIlfftiLl8X3awMlK
YTzCIrmllc38/+cV9IpQhdXzDUZ1kM7Zy56JbJl3XOsS4VnUYGmEtrKYpYQ2CKLY
/tcmrDKNw1ArWcP1axNN8FHfhy1FyQ==
=SH+C
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu into staging
First RISC-V PR for QEMU 8.0
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
# gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits)
hw/intc: sifive_plic: Fix the pending register range check
hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization
hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC
hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC
hw/intc: sifive_plic: Update "num-sources" property default value
hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
hw/intc: sifive_plic: Improve robustness of the PLIC config parser
hw/intc: sifive_plic: Drop PLICMode_H
hw/riscv: spike: Remove misleading comments
hw/riscv: Sort machines Kconfig options in alphabetical order
hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
RISC-V: Add Zawrs ISA extension support
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
target/riscv: Simplify helper_sret() a little bit
target/riscv: Set pc_succ_insn for !rvc illegal insn
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmO3kZEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/JpwgAj9kwpiWehGWrpQp9
rbEL+Fsx+SDhnoLVpF6nmSB1nkDqdgkdnhyRaLX9wM69bnocsGppZ5sd57J/cH3m
WiODVVbWP80WHonx5EN4htQv99TZWqVmXVl11DwOfsRUmINl4GG4kvHOOABd8hdc
39eRgGBBMyMShc6MUJiToyjEAcZPcGAiHkSW9YDGbvzhlloNWh46eLP1bdW3UJWK
UiEwPpXqg+L0V8nuuQnSFoPr5FIJmmoTeiGCRHXtvgOT7J8/6eKUESpfcKkHq1ye
dwcJQATuZip3+hyCCVveiZ86TQ81RMp9en1qw+HVzfed1Ial3Tk+tqiDqZJFm25b
GMpa5g==
=OjPl
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu into staging
Fix race conditions in new user-only vma tracking.
Add tcg backend paired register allocation.
Cleanup tcg backend function call abi.
# gpg: Signature made Fri 06 Jan 2023 03:12:17 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230105' of https://gitlab.com/rth7680/qemu: (47 commits)
tests/tcg/multiarch: add vma-pthread.c
accel/tcg: Handle false negative lookup in page_check_range
accel/tcg: Use g_free_rcu for user-exec interval trees
accel/tcg: Fix tb_invalidate_phys_page_unwind
tcg: Add TCGHelperInfo argument to tcg_out_call
tcg/aarch64: Merge tcg_out_callr into tcg_out_call
tcg: Move ffi_cif pointer into TCGHelperInfo
tcg: Factor init_ffi_layouts() out of tcg_context_init()
tcg: Convert typecode_to_ffi from array to function
tcg: Reorg function calls
tcg: Use output_pref wrapper function
tcg: Vary the allocation size for TCGOp
tcg: Pass number of arguments to tcg_emit_op() / tcg_op_insert_*()
accel/tcg/plugin: Use copy_op in append_{udata,mem}_cb
accel/tcg/plugin: Avoid duplicate copy in copy_call
accel/tcg/plugin: Don't search for the function pointer index
tcg: Use TCG_CALL_ARG_EVEN for TCI special case
tcg: Replace TCG_TARGET_EXTEND_ARGS with TCG_TARGET_CALL_ARG_I32
tcg: Replace TCG_TARGET_CALL_ALIGN_ARGS with TCG_TARGET_CALL_ARG_I64
tcg: Introduce TCGCallReturnKind and TCGCallArgumentKind
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmO3Cl8ACgkQewJE+xLe
RCKopQf/eVpmA04C792MIYHJnAaASbXZ1FA2Q33l9zrPt9V5oL0cer+rNPlqwVIb
jUdFLrT6ppe3jgkzeZVzLTGoNiLO1BnpH3+NV5ZpnMBON4g6/uyagRJekvb5xcDw
a832LM77zWrSQbV+Z3C0sn87j7u0YFYiXtya3mJUv6iSfKZnR4bGZH+LW2dOrnXn
+uMGnjjUQ2Ac7mvHTnrtooVUNhgRpTq4tMBwl1mE/hacUuejBjDgMLHDb6e4yPC7
g0/BuMB1ygBYFDINJ9El5oD0JtYHZjHOX4TKs6i0oXntoeveut62oGRwgLrk8eRe
lwKiEvFNrz/RYmCIy8Pz7s+5HQUgqA==
=/i3r
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230105' of https://github.com/quic/qemu into staging
Hexagon update: patches from several folks
# gpg: Signature made Thu 05 Jan 2023 17:35:27 GMT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230105' of https://github.com/quic/qemu:
Update scripts/meson-buildoptions.sh
Hexagon (target/hexagon) implement mutability mask for GPRs
target/hexagon: suppress unused variable warning
target/hexagon/idef-parser: fix two typos in README
tests/tcg/hexagon: fix underspecifed asm constraints
target/hexagon: rename aliased register HEX_REG_P3_0
linux-user/hexagon: fix signal context save & restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for the Zawrs ISA extension.
Given the current (incomplete) implementation of reservation sets
there seems to be no way to provide a full emulation of the WRS
instruction (wake on reservation set invalidation or timeout or
interrupt). Therefore, we just exit the TB and return to the main loop.
The specification can be found here:
https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
Note, that the Zawrs extension is frozen, but not ratified yet.
Changes since v3:
* Remove "RFC" since the extension is frozen
* Rebase on master and fix integration issues
* Fix entry ordering in extension list
Changes since v2:
* Rebase on master and resolve conflicts
* Adjustments according to a specification change
* Inline REQUIRE_ZAWRS() since it has only one user
Changes since v1:
* Adding zawrs to the ISA string that is passed to the kernel
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221005144948.3421504-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since priv spec v1.12, MRET and SRET now clear mstatus.MPRV when
leaving M-mode.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-2-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are 2 paths in helper_sret() and the same mstatus update codes
are replicated. Extract the common parts to simplify it a little bit.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221207090037.281452-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Failure to set pc_succ_insn may result in a TB covering zero bytes,
which triggers an assert within the code generator.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1224
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221203175744.151365-1-richard.henderson@linaro.org>
[ Changes by AF:
- Add missing run-plugin-test-noc-% line
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The priv spec v1.12 says:
If no PMP entry matches an M-mode access, the access succeeds. If
no PMP entry matches an S-mode or U-mode access, but at least one
PMP entry is implemented, the access fails. Failed accesses generate
an instruction, load, or store access-fault exception.
At present the exception cause is set to 'illegal instruction' but
should have been 'instruction access fault'.
Fixes: d102f19a20 ("target/riscv/pmp: Raise exception if no PMP entry is configured")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221205065303.204095-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
sstatus register dump is currently missing in riscv_cpu_dump_state().
As sstatus is a copy of mstatus, which is described in the priv spec,
it seems redundant to print the same information twice.
Add some comments for this to let people know this is intentional.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221125050354.3166023-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
let tlb_fill() function also increments PMU counter when it is from
two-stage translation, so QEMU could also monitor these PMU events when
CPU runs in VS/VU mode (like running guest OS).
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221123090635.6574-1-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should use "&&" instead of "&" when checking hcounteren.TM and
henvcfg.STCE bits.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp suppor")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221108125703.1463577-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Avoid calling riscv_itrigger_enabled() when calculate the tbflags.
As the itrigger enable status can only be changed when write
tdata1, migration load or itrigger fire, update env->itrigger_enabled
at these places.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221013062946.7530-5-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
