2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (v7m_psrs): Add MSPLIM, PSPLIM, MSPLIM_NS,
PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, FAULTMASK_NS, CONTROL_NS, SP_NS and
their lowecase counterpart special registers. Write register
identifier in hex.
* testsuite/gas/arm/archv8m-cmse-msr.s: Reorganize tests per
operation, special register and then case. Use different register for
each operation. Add tests for new special registers.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Adapt expected result
accordingly.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
opcodes/
* arm-dis.c (psr_name): Use hex as case labels. Add detection for
MSPLIM, PSPLIM, MSPLIM_NS, PSPLIM_NS, PRIMASK_NS, BASEPRI_NS,
FAULTMASK_NS, CONTROL_NS and SP_NS special registers.
For consistency with the previous two patches, this one
adds a macro for the two ARMv8.2 table entries. Both table
entries need a non-null aarch64_op field.
I haven't added macros for the RAS and STAT_PROFILE entries
since there's only one of each. The series isn't getting
rid of braced entries altogether, so I've only looked at
replacing things that occur more than once.
opcodes/
* aarch64-tbl.h (V8_2_INSN): New macro.
(aarch64_opcode_table): Use it.
After the previous patch, this one makes all CORE, FP
and SIMD table entries with null "verify" fields use
the associated macros.
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Make more use of
CORE_INSN, __FP_INSN and SIMD_INSN.
Nick recently wrapped most of aarch64-tbl.h entries in macros
like CORE_INSN. These new macros assumed that the aarch64_op
"op" field of aarch64_opcode is 0 and that the new "verifier"
field is NULL.
However, there are a lot of CORE, SIMD and FP insns whose table
entries need a nonzero aarch64_op field, so these entries
continued to use a braced list instead of a macro. This makes
the table entries less consistent and means that there are still
quite a few braced entries that need to be updated when making
further changes to the aarch64_opcode structure.
I think the number of entries that need a nonzero aarch64_op
field is high enough to justify having an explicit aarch64_op
entry for all CORE, SIMD and FP entries. This patch adds
one and updates all existing uses of the macros. A following
patch makes more use of the macros.
I've followed existing practice by using 0 instead of OP_NIL
for empty aarch64_op fields. Empty fields are still the norm
and you need to know what the fields are when reading the table
anyway, so it was hard to justify an additional patch to replace
all 0 op fields with OP_NIL.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN): Add OP parameter.
(aarch64_opcode_table): Update uses accordingly.
Convert microMIPS branches and jumps whose delay slot would be filled by
a generated NOP instruction to the corresponding compact form where one
exists, in a manner similar to MIPS16 JR->JRC and JALR->JALRC swap.
Do so even where the transformation switches from a 16-bit to a 32-bit
branch encoding for no benefit in code size reduction, as this is still
advantageous. This is because a branch/NOP pair takes 2 pipeline slots
or a 2-cycle completion latency except in superscalar implementations.
Whereas a compact branch may or may not stall on its target fetch, so it
will at most have a 2-cycle completion latency and may have only 1 even
in scalar implementations, and in superscalar implementations it is
expected to have no worse latency as a branch/NOP pair has. Also it
won't stall and therefore take the extra latency cycle in the not-taken
case.
Technically this is the same as MIPS16 compaction: for the qualifying
instruction encodings the APPEND_ADD_COMPACT machine code generation
method is selected where APPEND_ADD_WITH_NOP otherwise would and tells
the code generator in `append_insn' to convert the regular form of an
instruction to its corresponding compact form. For this the opcode is
tweaked as necessary and the microMIPS opcode table is scanned for the
matching updated instruction. A non-$0 `rt' operand to BEQ and BNE
instructions is moved to the `rs' operand field of BEQZC and BNEZC
encodings as required.
Unlike with MIPS16 compaction however we need to handle out-of-distance
branch relaxation as well. We do this by deferring the generation of
any delay-slot NOP required to relaxation made in `md_convert_frag', by
converting the APPEND_ADD_WITH_NOP machine code generation to APPEND_ADD
where a relaxed instruction is recorded. Relaxation then, depending on
actual code produced, chooses between either using a compact branch or
jump encoding and emitting the NOP outstanding if no compact encoding is
possible.
For code simplicity's sake the relaxation pass is retained even if the
principle of preferring a compact encoding to a 16-bit branch/NOP pair
means, in the absence of out-of-range branch relaxation, that a single
compact branch machine code instruction will eventually be produced from
a given assembly source instruction.
gas/
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16)
(RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16)
(RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32)
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits.
(get_append_method): Also return APPEND_ADD_COMPACT for
microMIPS instructions.
(find_altered_mips16_opcode): Exclude macros from matching.
Factor code out...
(find_altered_opcode): ... to this new function.
(find_altered_micromips_opcode): New function.
(frag_branch_delay_slot_size): Likewise.
(append_insn): Handle microMIPS branch/jump compaction.
(macro_start): Likewise.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/micromips.s: Add conditional explicit NOPs
for delay slot filling.
* testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for
delay slot filling.
* testsuite/gas/mips/micromips-size-1.s: Likewise.
* testsuite/gas/mips/micromips.l: Adjust line numbers.
* testsuite/gas/mips/micromips-warn.l: Likewise.
* testsuite/gas/mips/micromips-size-1.l: Likewise.
* testsuite/gas/mips/micromips.d: Adjust padding.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips-insn32.d: Likewise.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips@beq.d: Update patterns for
branch/jump compaction.
* testsuite/gas/mips/micromips@bge.d: Likewise.
* testsuite/gas/mips/micromips@bgeu.d: Likewise.
* testsuite/gas/mips/micromips@blt.d: Likewise.
* testsuite/gas/mips/micromips@bltu.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d:
Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d:
Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise.
* testsuite/gas/mips/micromips@relax.d: Likewise.
* testsuite/gas/mips/micromips@relax-at.d: Likewise.
* testsuite/gas/mips/micromips@relax-swap3.d: Likewise.
* testsuite/gas/mips/branch-extern-2.d: Likewise.
* testsuite/gas/mips/branch-extern-4.d: Likewise.
* testsuite/gas/mips/branch-section-2.d: Likewise.
* testsuite/gas/mips/branch-section-4.d: Likewise.
* testsuite/gas/mips/branch-weak-2.d: Likewise.
* testsuite/gas/mips/branch-weak-5.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/micromips-compact.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
* testsuite/ld-mips-elf/micromips-branch-absolute.d: Update
patterns for branch compaction.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d:
Likewise.
opcodes/
* micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b",
"beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to
"j".
opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
* arc-dis.c: Add new globals addrtypenames,
addrtypenames_max, and addtypeunknown.
(get_addrtype): New function.
(print_insn_arc): Print colons and address types when
required.
* arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
define insert and extract functions for all address types.
(arc_operands): Add operands for colon and all address
types.
* arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
* arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
* arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
* arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.
include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
ARC_NUM_ADDRTYPES.
* opcode/arc.h: Add BMU to insn_class_t enum.
* opcode/arc.h: Add PMU to insn_class_t enum.
gas * config/tc-arc.c: Add new global arc_addrtype_hash.
Define O_colon and O_addrtype.
(debug_exp): Add O_colon and O_addrtype.
(tokenize_arguments): Handle colon and address type
tokens.
(declare_addrtype): New function.
(md_begin): Initialise arc_addrtype_hash.
(arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
ignoring them.
* testsuite/gas/arc/nps400-8.s: New file.
* testsuite/gas/arc/nps400-8.d: New file.
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
* testsuite/gas/arc/nps400-8.d: Add expected PMU
instruction output.
Address issues with the disassembly of the NAL assembly idiom and R6
instruction introduced with commit 7361da2c95 ("Add support for MIPS
R6.") and then further tweaked with commit b9121b573e ("Add in a JALRC
alias and fix the NAL instruction."). As from R6 this instruction has
replaced the encoding of `bltzal $0, . + 4' as the solely supported form
of the former BLTZAL instruction for the regular MIPS ISA.
The instruction is marked as an alias only in our regular MIPS opcode
table, making it fail to disassemble in R6 code if the `no-aliases'
machine option has been passed to `objdump':
$ cat test.s
.text
foo:
nal
$ as -mips64r6 -o test.o test.s
$ objdump -dr --prefix-addresses --show-raw-insn -M no-aliases test.o
nal.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo> 04100000 0x4100000
...
$
This is because the `bltzal' entry has been marked as pre-R6 only in the
opcode table and there is no other opcode pattern to match.
Additionally the changes referred made NAL replace the equivalent
`bltzal $0, . + 4' instruction in disassembly, unless the `no-aliases'
machine option has been used, in legacy code. Seeing NAL, especially in
its updated form lacking the branch target argument, in the disassembly
of such code may be confusing to people. This is because unlike with
EHB only used in R2 and newer code -- the machine encoding of which we
anyway always disassemble to its corresponding current architecture's
mnemonic rather than its legacy meaning of `sll $0, $0, 3' -- BLTZAL has
been indeed used in legacy code. Even though `bltzal $0, . + 8' and its
machine code encoding (0x04100001) -- which is not equivalent to NAL and
still disassembles as BLTZAL -- has been the predominant form as opposed
to NAL's `bltzal $0, . + 4' (0x04100000), it makes sense to always keep
the old form in disassembly, while still accepting `nal' in assembly.
Remove the alias marking then from the the `nal' instruction pattern,
making it always match for R6 code, even with the `no-aliases' option.
And move the entry beyond the `bltzal' entry, making the latter one take
precedence for legacy binary code, while letting the former still match
any `nal' mnemonic in source code assembled for a legacy target.
Add a suitable test case to the GAS test suite. While the change
affects the disassembler more than the assembler, so placing the test
case in the binutils test suite might be more appropriate, the intent is
also to verify that `nal' is still accepted by GAS for legacy targets,
plus we have test infrastructure available in the GAS test suite for
automatic multiple ISA level testing, which we lack from the binutils
framework.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove the INSN2_ALIAS
annotation from the "nal" entry and reorder it beyond "bltzal".
gas/
* testsuite/gas/mips/nal-1.d: New test.
* testsuite/gas/mips/mipsr6@nal-1.d: New test.
* testsuite/gas/mips/nal-2.d: New test.
* testsuite/gas/mips/mipsr6@nal-2.d: New test.
* testsuite/gas/mips/nal.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch adds support for the LDTXA instructions, along with the
corresponding ASIs. Tests for GAS are included.
opcodes/ChangeLog:
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (ldtxa): New macro.
(sparc_opcodes): Use the macro defined above to add entries for
the LDTXA instructions.
(asi_table): Add the ASI_TWINX_* asis used in the LDTXA
instruction.
gas/ChangeLog:
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/ldtxa.s: New file.
* testsuite/gas/sparc/ldtxa.d: Likewise.
* testsuite/gas/sparc/sparc.exp: Execute the ldtxa test.
Tighten up the opcode match fields for conditional jump and call
instructions so more general opcodes don't match them in disassembly.
opcodes/ChangeLog:
* opcodes/ft32-opc.c (ft32_opc_info): Correct mask for "callc"
and "jmpc".
... just like is already the case for 16- and 32-bit movzb: I can't see
why omitting suffixes on this (and movs{b,w,l}) is not allowed, when it
is allowed for all other instructions where the suffix is redundant
with (one of) the operands.
The dual purpose mnemonic (string move vs scalar double move) breaks
the assumption that the isstring flag would be set on both the first
and last entry in the current set of templates, which results in bogus
or missing diagnostics for the string move variant of the mnemonic.
Short of mostly rewriting i386_index_check() and its interaction with
the rest of the code, simply shrink the template set to just string
instructions when encountering the second memory operand, and run
i386_index_check() a second time for the first memory operand after
that reduction.
This patch fixes the typo "uf" in the comment. I'll push it in as the
change is obvious.
2016-06-30 Yao Qi <yao.qi@linaro.org>
* arm-dis.c (print_insn): Fix typo in comment.
aarch64_opnd_info used bitfields to hold vector element indices,
but values were stored into those bitfields before their ranges had
been checked. This meant large invalid indices could be silently
truncated to smaller valid indices.
The two obvious fixes were to do the range checking earlier or use
a full 64-bit field for the index. I went for the latter for two
reasons:
- Doing the range checking in operand_general_constraint_met_p
seems structurally cleaner than doing it while parsing.
- The bitfields didn't really buy us anything. The imm field
of the union is already 128 bits, so we can use a full int64_t
index without growing the structure.
The patch also adds missing range checks for the elements in a register
list index.
include/
* opcode/aarch64.h (aarch64_opnd_info): Change index fields to int64_t.
opcodes/
* aarch64-opc.c (operand_general_constraint_met_p): Check the
range of ldst_elemlist operands.
(print_register_list): Use PRIi64 to print the index.
(aarch64_print_operand): Likewise.
gas/
* testsuite/gas/aarch64/diagnostic.s,
testsuite/gas/aarch64/diagnostic.l: Add tests for out-of-range indices.
The code supporting -mspfp, -mdpfp, and -mfpuda options are in
sections of code that are commented as being for backward
compatibility only, and having no effect. However, they do have an
effect, enabling the SPX, DPX, and DPA instruction subclasses
respectively. This commit moves the code supporting these options
away from the comments indicating that they are dummy options, and
also fixes a small issue where -mnps400 had the additional effect
of enabling SPX instructions.
A couple of other minor edits (that make no functional change) are
also included.
gas/ChangeLog:
* config/tc-arc.c (options, md_longopts, md_parse_option):
Move -mspfp, -mdpfp and -mfpuda out of the sections for
dummy options. Correct erroneous enabling of SPFP
instructions when using -mnps400.
include/ChangeLog:
* opcode/arc.h: Make insn_class_t alphabetical again.
opcodes/ChangeLog:
* arc-opc.c: Correct description of availability of NPS400
features.
This patch fixes and expands the definition of the read/write
instructions for ancillary-state, privileged and hyperprivileged
registers in opcodes.
It also adds support for three new v9m hyperprivileged registers:
%hmcdper, %hmcddfr and %hva_mask_nz.
Finally, the patch expands existing tests (and adds several new ones) in
order to cover all the read/write instructions in all its variants.
opcodes/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (rdasr): New macro.
(wrasr): Likewise.
(rdpr): Likewise.
(wrpr): Likewise.
(rdhpr): Likewise.
(wrhpr): Likewise.
(sparc_opcodes): Use the macros above to fix and expand the
definition of read/write instructions from/to
asr/privileged/hyperprivileged instructions.
* sparc-dis.c (v9_hpriv_reg_names): Add %hmcdper, %hmcddfr and
%hva_mask_nz. Prefer softint_set and softint_clear over
set_softint and clear_softint.
(print_insn_sparc): Support %ver in Rd.
gas/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (hpriv_reg_table): Add registers %hmcdper,
%hmcddfr and %hva_mask_nz.
(sparc_ip): New handling of asr/privileged/hyperprivileged
registers, adapted to the new form of the sparc opcodes table.
* testsuite/gas/sparc/rdasr.s: New file.
* testsuite/gas/sparc/rdasr.d: Likewise.
* testsuite/gas/sparc/wrasr.s: Likewise.
* testsuite/gas/sparc/wrasr.d: Likewise.
* testsuite/gas/sparc/sparc.exp (sparc_elf_setup): Add rdasr and
wrasr tests.
* testsuite/gas/sparc/rdpr.d: Use -Av9m, as some privileged
registers require it.
* testsuite/gas/sparc/wrpr.s: Complete to cover all privileged
registers and write instruction modalities.
* testsuite/gas/sparc/wrpr.d: Likewise.
* testsuite/gas/sparc/rdhpr.s: Likewise for hyperprivileged
registers.
* testsuite/gas/sparc/rdhpr.d: Likewise.
* testsuite/gas/sparc/wrhpr.s: Likewise.
* testsuite/gas/sparc/wrhpr.d: Likewise.
This patch marks the SPARC instructions in the opcodes table with their
proper opcode architectures, and makes the assembler aware of them.
This allows the assembler to properly realize when a new instruction
needs a higher architecture (after v9b) and to react accordingly
emitting an error message or bumping the architecture.
It also expands architecture mismatch tests to cover architectures
higher than v9b, and fixes a couple of minor bugs in the GAS testsuite.
opcodes/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc_opcodes): Adjust instructions opcode
architecture according to the hardware capabilities they require.
(sparc_priv_regs): New table.
(sparc_hpriv_regs): Likewise.
(sparc_asr_regs): Likewise.
(v9anotv9m): Define.
gas/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_arch_table): adjust the GAS
architectures to use the right opcode architecture.
(sparc_md_end): Handle v9{c,d,e,v,m}.
(sparc_ip): Fix some comments.
* testsuite/gas/sparc/ldx_efsr.d: Fix the architecture of this
instruction, which is v9d.
* testsuite/gas/sparc/mwait.s: Remove the `rd %mwait,%g1'
instruction from the test, as %mwait is not readable.
* testsuite/gas/sparc/mwait.d: Likewise.
* testsuite/gas/sparc/mism-1.s: Expand to check v9b and v9e
mismatch architecture errors.
* testsuite/gas/sparc/mism-2.s: New file.
This patch adds support for the opcode architectures
SPARC_OPCODE_ARCH_V9{C,D,E,V,M} and its associated BFD machine numbers
bfd_mach_sparc_v9{c,d,e,v,m} and bfd_mach_sparc_v8plus{c,d,e,v,m}.
Note that for arches up to v9b (UltraSPARC III), the detection of the
BFD machine type was based on the bits in the e_machine field of the ELF
header. However, there are no more available bits in that field, so
this patch takes the approach of using the hardware capabilities stored
in the object attributes HWCAPS/HWCAPS2 in order to characterize the
machine the object was built for.
bfd/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* archures.c (bfd_mach_sparc_v8plusc): Define.
(bfd_mach_sparc_v9c): Likewise.
(bfd_mach_sparc_v8plusd): Likewise.
(bfd_mach_sparc_v9d): Likewise.
(bfd_mach_sparc_v8pluse): Likewise.
(bfd_mach_sparc_v9e): Likewise.
(bfd_mach_sparc_v8plusv): Likewise
(bfd_mach_sparc_v9v): Likewise.
(bfd_mach_sparc_v8plusm): Likewise.
(bfd_mach_sparc_v9m): Likewise.
(bfd_mach_sparc_v9_p): Adapt to v8plusm and v9m.
(bfd_mach_sparc_64bit_p): Likewise.
* bfd-in2.h: Regenerate.
* cpu-sparc.c (arch_info_struct): Add entries for
bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}.
* aoutx.h (machine_type): Handle bfd_mach_sparc_v8plus{c,d,e,v,m}
and bfd_mach_sparc_v9{c,d,e,v,m}.
* elf32-sparc.c (elf32_sparc_final_write_processing): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_object_p): Likewise.
include/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (enum sparc_opcode_arch_val): Add
SPARC_OPCODE_ARCH_V9C, SPARC_OPCODE_ARCH_V9D,
SPARC_OPCODE_ARCH_V9E, SPARC_OPCODE_ARCH_V9V and
SPARC_OPCODE_ARCH_V9M.
opcodes/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (MASK_V9): Add SPARC_OPCODE_ARCH_V9{C,D,E,V,M}.
(compute_arch_mask): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and
bfd_mach_sparc_v9{c,d,e,v,m}.
* sparc-opc.c (MASK_V9C): Define.
(MASK_V9D): Likewise.
(MASK_V9E): Likewise.
(MASK_V9V): Likewise.
(MASK_V9M): Likewise.
(v6): Add MASK_V9{C,D,E,V,M}.
(v6notlet): Likewise.
(v7): Likewise.
(v8): Likewise.
(v9): Likewise.
(v9andleon): Likewise.
(v9a): Likewise.
(v9b): Likewise.
(v9c): Define.
(v9d): Likewise.
(v9e): Likewise.
(v9v): Likewise.
(v9m): Likewise.
(sparc_opcode_archs): Add entry for v9{c,d,e,v,m}.
binutils* readelf.c (is_24bit_abs_reloc): Add support for R_FT32_20
reloc.
gas * config/tc-ft32.c (md_assemble): Call dwarf2_emit_insn with the
instruction size.
* config/tc-mcore.c (md_assemble): Likewise.
* config/tc-mn10200.c (md_assemble): Likewise.
* config/tc-moxie.c (md_assemble): Likewise.
* config/tc-pj.c (md_apply_fix): Handle BFD_RELOC_PJ_CODE_REL32.
* testsuite/gas/all/gas.exp (diff1 test): Alpha sort list of
exception targets. Add alpha, hppa, microblaze and rl78 to list
of exceptions.
(forward): Add microblaze to list of exceptions.
(fwdexp): Add alpha to list of exceptions.
(redef2): Add arm-epoc-pe and rl78 to list of exceptions.
(redef3): Add rl78 and x86_64 cygwin to list of exceptions.
(do_930509a): Alpha sort list of exception targets. Add h8300 and
mn10200 to list of exceptions.
(align2): Expect to fail for nds32.
(cond): Add alpha and rl78 to list of exceptions.
* testsuite/gas/all/none.d: Skip for ft32 and hppa.
* testsuite/gas/all/string.d: Skip for tic4x.
* testsuite/gas/alpha/alpha.exp: Note that the alpha-linuxecoff
target does not support ELF.
* testsuite/gas/arm/blx-bl-convert.dL Skip for the nto target.
* testsuite/gas/cfi/cfi-alpha-2.d: All extended format names.
* testsuite/gas/cfi/cfi.exp: Alpha sort list of targets. Skip SH
tests for sh-pe and sh-rtemscoff targets.
* testsuite/gas/elf/elf.exp (redef): Add rl78, xgate and vax to
list of exceptions.
(type): Run the noifunc version for alpha-freebsd and visium.
* testsuite/gas/elf/warn-2.s: Do not expect to fail on the mcore,
mn10200 or moxie targets.
* testsuite/gas/ft32/insn.d: Update expected disassembly.
* testsuite/gas/i386/i386.exp (x86-64-pcrel): Skip for cygwin
targets.
* testsuite/gas/lns/lns.exp (lns-common-1): No longer skip for
mcore and rx targets.
* testsuite/gas/macros/macros.exp (dot): Add exceptions for ns32k,
rl78 and vax.
(purge): Expect to fail on the ns32k and vax.
* testsuite/gas/nds32/alu-2.d: Update expected disassembly.
* testsuite/gas/nds32/ls.d: Likewise.
* testsuite/gas/nds32/sys-reg.d: Likewise.
* testsuite/gas/nds32/usr-spe-reg.d: Likewise.
* testsuite/gas/pe/aligncomm-d.d: Skip for the sh.
* testsuite/gas/pe/section-align-3.d: Likewise.
* testsuite/gas/pe/section-exclude.d: Likewise.
* testsuite/gas/ppc/test2xcoff32.d: Pass once all the required
data has been seen.
* testsuite/gas/ppc/textalign-xcoff-001.d: Fix up regexp to allow
for variations in whitespace.
* testsuite/gas/tilepro/t_constants.d: Pass once all the required
data has been seen.
* testsuite/gas/tilepro/t_constants.s (.safe_word): New macro.
Installs a 32-bit value without generating warnings on 64-bit
hosts.
Use the new macro to replace the .word directives.
opcodes * nds32-dis.c (nds32_parse_audio_ext): Change printing of integer
constants to match expected behaviour.
(nds32_parse_opcode): Likewise. Also for whitespace.
The extract function used for some arc_s instructions was not
implemented, and instead always returned 0. Fixed in this commit.
opcodes/ChangeLog:
* arc-opc.c (extract_rhv1): Extract value from insn.
gas/ChangeLog:
* testsuite/gas/arc/add_s.d: New file.
* testsuite/gas/arc/add_s.s: New file.
This commit adds the ldbit instruction for the NPS-400. The ldbit
instruction uses the same encoding as the ld instruction, but sets
the ZZ field to 11 (which is a reserved setting), and sets the AA
field to 1 or 2 for the x2 and x4 flags respectively.
With the exception of ldbit, this commit adds implementations of
all DPI instructions for the NPS-400. These instructions are:
- hash / hash.p[0-3]
- tr
- utf8
- e4by
- addf
Unknown instructions are currently just dumped as .long 1234. On
S/390 we can do a bit better since the instruction length is encoded
in the opcode. That way also unknown instructions can be skipped
according to their real length. That way we can continue correctly
after that instruction. However, there are also some drawbacks with
that behavior when dumping data. So for now that behavior is only
enabled for text section but even there it might mess things up when
having a literal pool embedded in the code. Therefore I've left the
feature disabled by default and have added the -Minsnlength option to
enable it explicitely.
opcodes/ChangeLog:
2016-06-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-dis.c (option_use_insn_len_bits_p): New file scope
variable.
(init_disasm): Handle new command line option "insnlength".
(print_s390_disassembler_options): Mention new option in help
output.
(print_insn_s390): Use the encoded insn length when dumping
unknown instructions.
This patch adds default data address space origin (0x800000) to the symbol addresses.
when disassemble lds/sts instructions. So that symbol names shall be printed in comments
for lds/sts instructions disassemble.
ld/
* testsuite/ld-avr/lds-mega.d: New test.
* testsuite/ld-avr/lds-mega.s: New test source.
* testsuite/ld-avr/lds-tiny.d: New test.
* testsuite/ld-avr/lds-tiny.s: New test source.
opcodes/
* avr-dis.c (avr_operand): Add default data address space origin (0x800000) to the
address and set as symbol address for LDS/ STS immediate operands.
VLE is an encoding, not a particular processor architecture, so it
isn't really proper to select insns based on PPC_OPCODE_VLE. For
example
{"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}},
{"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}},
shows two insns that have the same encoding, both available with VLE.
Enabling both with VLE means we can't disassemble the second variant
even if -Maltivec is given rather than -Mspe. Also, we don't check
user assembly against the processor type as well as we could.
Another problem is that when using the VLE encoding, insns from the
main ppc opcode table are not available, except those using opcode 4
and 31. Correcting this revealed two errors in the ld testsuite,
use of "nop" and "rfmci" when -mvle.
This patch fixes those problems in the opcode table, and removes
PPCNONE. I find a plain 0 distracts less from other values.
In addition, I've implemented code to recognize some machine values
from the apuinfo note present in ppc32 objects. It's not a complete
disambiguation since we're lacking info to detect newer chips, but
what we have should help with disassembly.
include/
* elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL,
PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK,
PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK,
PPC_APUINFO_VLE: Define.
opcodes/
* ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default
cpu for "vle" to e500.
* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
(PPCNONE): Delete, substitute throughout.
(powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated"
except for major opcode 4 and 31.
(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.
bfd/
* cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry
to match other 32-bit archs.
* elf32-ppc.c (_bfd_elf_ppc_set_arch): New function.
(ppc_elf_object_p): Call it.
(ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix
overlong line.
(APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here.
* elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch.
* bfd-in.h (_bfd_elf_ppc_at_tls_transform,
_bfd_elf_ppc_at_tprel_transform): Move to..
* elf-bfd.h: ..here.
(_bfd_elf_ppc_set_arch): Declare.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
add vle_opcodes twice.
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
ld/
* testsuite/ld-powerpc/apuinfo1.s: Delete nop.
* testsuite/ld-powerpc/apuinfo-vle2.s: New.
* testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
This patch adds the architecture extension "+ras" to enable RAS
support. It is enabled by default for -march=armv8.2-a and available but
disabled by default for armv8-a and armv8.1-a.
gas/
* config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras.
(arm_ext_ras): Renamed from arm_ext_v8_2.
(insns): Update for arm_ext_v8_2 renaming.
(arm_extensions): Add "ras".
* doc/c-arm.texi (ARM Options): Add an entry for "ras".
* testsuite/gas/arm/armv8-a+ras.d: New.
* testsuite/gas/arm/armv8_2-a.d: Add explicit command line
options.
include/
* opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding
entries.
(ARM_AEXT_V8_2A): Add ARM_EXT2_RAS.
opcodes/
* arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with
ARM_EXT_RAS in relevant entries.
AMD64 spec and Intel64 spec differ in indirect branches in 64-bit mode.
AMD64 supports indirect branches with 16-bit address via the data size
prefix while the data size prefix is ignored by Intel64.
gas/
PR binutis/18386
* testsuite/gas/i386/i386.exp: Run x86-64-branch-4.
* testsuite/gas/i386/x86-64-branch.d: Updated.
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
* testsuite/gas/i386/x86-64-branch-4.l: New file.
* testsuite/gas/i386/x86-64-branch-4.s: Likewise.
opcodes/
PR binutis/18386
* i386-dis.c (indirEv): Replace stack_v_mode with indir_v_mode.
(indir_v_mode): New.
Add comments for '&'.
(reg_table): Replace "{T|}" with "{&|}" on call and jmp.
(putop): Handle '&'.
(intel_operand_size): Handle indir_v_mode.
(OP_E_register): Likewise.
* i386-opc.tbl: Mark 64-bit indirect call/jmp as AMD64. Add
64-bit indirect call/jmp for AMD64.
* i386-tbl.h: Regenerated
gas * config/tc-arc.c (parse_opcode_flags): New function.
(find_opcode_match): Move flag parsing code out to new function.
Ignore operands marked IGNORE.
(build_fake_opcode_hash_entry): New function.
(find_special_case_long_opcode): New function.
(find_special_case): Lookup long opcodes.
* testsuite/gas/arc/nps400-7.d: New file.
* testsuite/gas/arc/nps400-7.s: New file.
include * opcode/arc.h (MAX_INSN_ARGS): Increase to 16.
(struct arc_long_opcode): New structure.
(arc_long_opcodes): Declare.
(arc_num_long_opcodes): Declare.
opcodes * arc-dis.c (struct arc_operand_iterator): New structure.
(find_format_from_table): All the old content from find_format,
with some minor adjustments, and parameter renaming.
(find_format_long_instructions): New function.
(find_format): Rewritten.
(arc_insn_length): Add LSB parameter.
(extract_operand_value): New function.
(operand_iterator_next): New function.
(print_insn_arc): Use new functions to find opcode, and iterator
over operands.
* arc-opc.c (insert_nps_3bit_dst_short): New function.
(extract_nps_3bit_dst_short): New function.
(insert_nps_3bit_src2_short): New function.
(extract_nps_3bit_src2_short): New function.
(insert_nps_bitop1_size): New function.
(extract_nps_bitop1_size): New function.
(insert_nps_bitop2_size): New function.
(extract_nps_bitop2_size): New function.
(insert_nps_bitop_mod4_msb): New function.
(extract_nps_bitop_mod4_msb): New function.
(insert_nps_bitop_mod4_lsb): New function.
(extract_nps_bitop_mod4_lsb): New function.
(insert_nps_bitop_dst_pos3_pos4): New function.
(extract_nps_bitop_dst_pos3_pos4): New function.
(insert_nps_bitop_ins_ext): New function.
(extract_nps_bitop_ins_ext): New function.
(arc_operands): Add new operands.
(arc_long_opcodes): New global array.
(arc_num_long_opcodes): New global.
* arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.
gas * testsuite/gas/arc/nps-400-1.s: Add rflt variants with
operands of types a,b,u6, 0,b,u6, and 0,b,limm.
* testsuite/gas/arc/nps-400-1.d: Likewise.
opcodes * arc-nps400-tbl.h: Add operands a,b,u6, 0,b,u6, and
0,b,limm to the rflt instruction.
Shifting into the sign bit of a 32 bit int and then converting to a unsigned
type is less straight forward than just shifting an unsigned value.
opcodes/ChangeLog:
2016-05-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* sh-opc.h (ARCH_SH_HAS_DSP): Make the shifted value an unsigned
constant.
AMD64 vs CpuIntel64 ISA should be handled similar as AT&T vs Intel
syntax. Since cpu_flags isn't sorted by position, we need to check
the whole cpu_flags array for the maximum position when verifying
CpuMax.
gas/
PR gas/20154
* config/tc-i386.c (cpu_flags_match): Don't set cpuamd64 nor
cpuintel64.
(match_template): Check Intel64/AMD64 ISA.
opcodes/
PR gas/20154
* i386-gen.c (cpu_flags): Remove CpuAMD64 and CpuIntel64.
(opcode_modifiers): Add AMD64 and Intel64.
(main): Properly verify CpuMax.
* i386-opc.h (CpuAMD64): Removed.
(CpuIntel64): Likewise.
(CpuMax): Set to CpuNo64.
(i386_cpu_flags): Remove cpuamd64 and cpuintel64.
(AMD64): New.
(Intel64): Likewise.
(i386_opcode_modifier): Add amd64 and intel64.
(i386-opc.tbl): Replace CpuAMD64/CpuIntel64 with AMD64/Intel64
on call and jmp.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
CpuMax should be CpuIntel64, not CpuNo64. i386-gen.c is updated to
verify that CpuMax is correct. X86 assembler is updated to properly
set cpuamd64 and cpuintel64.
gas/
PR gas/20154
* config/tc-i386.c (intel64): New.
(cpu_flags_match): Set cpuamd64 and cpuintel64.
(md_parse_option): Set intel64 instead of cpuamd64 and
cpuintel64.
opcodes/
PR gas/20154
* i386-gen.c (main): Fail if CpuMax is incorrect.
* i386-opc.h (CpuMax): Set to CpuIntel64.
* i386-tbl.h: Regenerated.
PR target/20150
* msp430-dis.c (msp430dis_read_two_bytes): New function.
(msp430dis_opcode_unsigned): New function.
(msp430dis_opcode_signed): New function.
(msp430_singleoperand): Use the new opcode reading functions.
Only disassenmble bytes if they were successfully read.
(msp430_doubleoperand): Likewise.
(msp430_branchinstr): Likewise.
(msp430x_callx_instr): Likewise.
(print_insn_msp430): Check that it is safe to read bytes before
attempting disassembly. Use the new opcode reading functions.
Add all AVX512 bits to CPU_ANY_AVX_FLAGS.
* i386-gen.c (cpu_flag_init): Add CpuVREX to CPU_AVX512DQ_FLAGS,
CPU_AVX512BW_FLAGS, CPU_AVX512VL_FLAGS, CPU_AVX512IFMA_FLAGS
and CPU_AVX512VBMI_FLAGS. Add CpuAVX512DQ, CpuAVX512BW,
CpuAVX512VL, CpuAVX512IFMA and CpuAVX512VBMI to
CPU_ANY_AVX_FLAGS.
* i386-init.h: Regenerated.
generic gas code has a struct symbol, and tic54x typedefs a struct to symbol.
This seems at least rather confusing, and it seems like target specific headers
shouldn't put such generic names in the global namespace preventing other
generic code from using them.
opcodes/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* tic54x-dis.c (sprint_mmr): Adjust.
* tic54x-opc.c: Likewise.
gas/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-tic54x.c (tic54x_mmregs): Adjust.
(md_begin): Likewise.
(encode_condition): Likewise.
(encode_cc3): Likewise.
(encode_cc2): Likewise.
(encode_operand): Likewise.
(tic54x_undefined_symbol): Likewise.
include/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* opcode/tic54x.h (struct symbol_): typedef to tic54x_symbol instead of
plain symbol.
Mixing MIPS16 and microMIPS code in a single binary isn't usually
supported but GAS happily produces such code if requested. However it
is not correctly disassembled even if a symbol table is available and
function symbols are correctly anotated with the ISA mode. This is
because the ELF-header global microMIPS ASE flag takes precedence over
MIPS16 function annotation, causing them to be treated as regular MIPS
code.
Correct the problem by respecting function symbol anotation regardless
of the ELF-header flag.
binutils/
* testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test.
* testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
opcodes/
* mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand,
replacing references to `micromips_ase' throughout.
(_print_insn_mips): Don't use file-level microMIPS annotation to
determine the disassembly mode with the symbol table.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (elf32_arm_size_stubs): Use new macros
ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get
and set branch type of a symbol.
(bfd_elf32_arm_process_before_allocation): Likewise.
(elf32_arm_relocate_section): Likewise and fix identation along the
way.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_swap_symbol_out): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to
set branch type of a symbol.
gdb/
* arm-tdep.c (arm_elf_make_msymbol_special): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
include/
* arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE
enumerator.
(NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro.
(ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise.
(ARM_SYM_BRANCH_TYPE): Replace by ...
(ARM_GET_SYM_BRANCH_TYPE): This and ...
(ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether
BFD_ASSERT is defined or not.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
opcodes/
* arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get
branch type of a symbol.
(print_insn): Likewise.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_ext_m): Add feature bit ARM_EXT2_V8M_MAIN.
(arm_ext_v8m_main): New feature set for bit ARM_EXT2_V8M_MAIN.
(arm_ext_v8m_m_only): New feature set for instructions in ARMv8-M not
shared with a non M profile architecture.
(do_rn): New function.
(known_t32_only_insn): Check opcode against arm_ext_v8m_m_only rather
than arm_ext_v8m.
(v7m_psrs): Add ARMv8-M security extensions new special registers.
(insns): Add ARMv8-M Security Extensions instructions.
(aeabi_set_public_attributes): Use arm_ext_v8m_m_only instead of
arm_ext_v8m_m to decide the profile and the Thumb ISA.
* testsuite/gas/arm/archv8m-cmse.s: New file.
* testsuite/gas/arm/archv8m-cmse-main.s: Likewise..
* testsuite/gas/arm/archv8m-cmse-msr.s: Likewise.
* testsuite/gas/arm/any-cmse.d: Likewise.
* testsuite/gas/arm/any-cmse-main.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
include/
* opcode/arm.h (ARM_EXT2_V8M_MAIN): new feature bit.
(ARM_AEXT2_V8M_MAIN): New architecture extension feature set.
(ARM_ARCH_V8M_MAIN): Use ARM_AEXT2_V8M_MAIN instead of ARM_AEXT2_V8M
for the high core bits.
opcodes/
* arm-dis.c (coprocessor_opcodes): Add entries for VFP ARMv8-M
Mainline Security Extensions instructions.
(thumb_opcodes): Add entries for narrow ARMv8-M Security
Extensions instructions.
(thumb32_opcodes): Add entries for wide ARMv8-M Security Extensions
instructions.
(psr_name): Add new MSP_NS and PSP_NS ARMv8-M Security Extensions
special registers.
opcodes/ChangeLog:
2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc_opcodes): Fix mnemonic of faligndatai.
gas/ChangeLog:
2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/sparc5vis4.s: Fix mnemonic of faligndatai.
* testsuite/gas/sparc/sparc5vis4.d: Likewise.
PR target/19722
opcodes * aarch64-dis.c (aarch64_opcode_decode): Run verifier if present.
* aarch64-opc.c (verify_ldpsw): New function.
* aarch64-opc.h (verify_ldpsw): New prototype.
* aarch64-tbl.h: Add initialiser for verifier field.
(LDPSW): Set verifier to verify_ldpsw.
binutils* testsuite/binutils-all/aarch64/illegal.s: New test.
* testsuite/binutils-all/aarch64/illegal.d: New test driver.
include * opcode/aarch64.h (struct aarch64_opcode): Add verifier field.
Disassembler won't work properly when size of bfd_vma is smaller than
address size.
PR binutils/19983
PR binutils/19984
* i386-dis.c (print_insn): Return -1 if size of bfd_vma is
smaller than address size.
Add support for arc/nps400 cmem instructions, these load and store
instructions are hard-wired to access "0x57f00000 + 16-bit-offset".
Supporting this relocation required some additions to the arc relocation
handling in the bfd library, as well as the standard changes required to
add a new relocation type.
There's a test of the new instructions in the assembler, and a test of
the relocation in the linker.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c: Add 'opcode/arc.h' include.
(struct arc_relocation_data): Add symbol_name.
(arc_special_overflow_checks): New function.
(arc_do_relocation): Use arc_special_overflow_checks, reindent as
required, add an extra comment.
(elf_arc_relocate_section): Setup symbol_name in reloc_data.
gas/ChangeLog:
* testsuite/gas/arc/nps400-3.d: New file.
* testsuite/gas/arc/nps400-3.s: New file.
include/ChangeLog:
* elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc.
* opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define.
ld/ChangeLog:
* testsuite/ld-arc/arc.exp: New file.
* testsuite/ld-arc/nps-1.s: New file.
* testsuite/ld-arc/nps-1a.d: New file.
* testsuite/ld-arc/nps-1b.d: New file.
* testsuite/ld-arc/nps-1b.err: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
instructions.
* arc-opc.c (insert_nps_cmem_uimm16): New function.
(extract_nps_cmem_uimm16): New function.
(arc_operands): Add NPS_XLDST_UIMM16 operand.
Move the logic that calculates the instruction length out to a new
function. Restructure the code to make it simpler.
opcodes/ChangeLog:
* arc-dis.c (arc_insn_length): New function.
(print_insn_arc): Use arc_insn_length, change insnLen to unsigned.
(find_format): Change insnLen parameter to unsigned.
PR target/19937
opcode * v850-opc.c (v850_opcodes): Correct masks for long versions of
the LD.B and LD.BU instructions.
gas * testsuite/gas/v850/pr19937.s: New test.
* testsuite/gas/v850/pr19937.d: New test control file.
* testsuite/gas/v850/basic.exp: Run the new test.
Add some new control instructions to the opcodes library, and a new test
for these new instructions to the assembler. The new instructions use
an instruction flag longer than any seen before (on arc), and so the max
flag length is extended to accommodate this.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7.
* testsuite/gas/arc/nps400-2.d: New file.
* testsuite/gas/arc/nps400-2.s: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add schd, sync, and hwschd instructions.
* arc-opc.c (arc_flag_operands): Add new flags.
(arc_flag_classes): Add new classes.
This commit completes support for having multiple instructions with the
same mnemonic in non-contiguous blocks within the arc_opcodes table.
The commit adds an iterator mechanism for the arc_opcode_hash_entry
structure, which is then used in find_opcode_match to consider all
arc_opcode entries with the same mnemonic, even when these instructions
are stored in non-contiguous blocks.
I extend the comment on the arc_opcodes table to discuss how entries
within the table are organised, and to mention how instructions can be
split into multiple groups if needed, but that the table is still
searched in table order.
There should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (struct arc_opcode_hash_entry_iterator): New
structure.
(arc_opcode_hash_entry_iterator_init): New function.
(arc_opcode_hash_entry_iterator_next): New function.
(find_opcode_match): Iterate over all arc_opcode entries
referenced by the arc_opcode_hash_entry passed in as a parameter.
opcodes/ChangeLog:
* arc-opc.c (arc_opcodes): Extend comment to discus table layout.
Some operands accidentally had the ARC_OPERAND_NCHK flag (due to copy &
paste mistake), meaning the operand value was skipping the overflow
check before being inserted. This commit removes the unwanted flags.
opcodes/ChangeLog:
* arc-opc.c (arc_operands): Fix operand flags for NPS_R_DST, and
NPS_R_SRC1.
Add a new comment, and clean up some whitespace issues in the
instruction table.
opcode/ChangeLog:
* arc-nps400-tbl.h: Add a header comment, and fix some whitespace
issues. No functional changes.
This patch changes the location of several variants of the `wr'
instruction in sparc_opcodes. This is to get the assembler to emit the
right diagnostics when an invalid %asrN register is used in an
instruction.
bfd * warning.m4 (GCC_WARN_CFLAGS): Only add -Wstack-usage if using a
sufficiently recent version of GCC.
* configure: Regenerate.
others * configure: Regenerate.
Adds the first few nps400 instructions.
gas/ChangeLog:
* testsuite/gas/arc/nps400-0.d: New file.
* testsuite/gas/arc/nps400-0.s: New file.
* testsuite/gas/arc/nps400-1.d: New file.
* testsuite/gas/arc/nps400-1.s: New file.
include/ChangeLog:
* opcodes/arc.h (insn_class_t): Add BITOP type.
opcodes/ChangeLog:
* arc-nps400-tbl.h: New file.
* arc-opc.c: Add top level comment.
(insert_nps_3bit_dst): New function.
(extract_nps_3bit_dst): New function.
(insert_nps_3bit_src2): New function.
(extract_nps_3bit_src2): New function.
(insert_nps_bitop_size): New function.
(extract_nps_bitop_size): New function.
(arc_flag_operands): Add nps400 entries.
(arc_flag_classes): Add nps400 entries.
(arc_operands): Add nps400 entries.
(arc_opcodes): Add nps400 include.
When parsing the operand instruction flags we don't currently detect the
case where multiple flags are provided from the same class set, these
will be accepted and the bit values merged together, resulting in the
wrong instruction being assembled. For example:
adc.n.eq r0,r0,r2
Will assemble without error, yet, upon disassembly, the instruction will
actually be:
adc.c r0,r0,r2
In a later commit the concept of required flags will be introduced.
Required flags are just like normal instruction flags, except that they
must be present for the instruction to match. Adding this will allow
for simpler instructions in the instruction table, and allow for more
sharing of operand extraction and insertion functions.
To solve both of the above issues (multiple flags being invalid, and
required flags), this commit reworks the flag class mechanism.
Currently the flag class is never used. Each instruction can reference
multiple flag classes, each flag class has a class type and a set of
flags. However, at present, the class type is never used. The current
values identify the type of instruction that the flag will be used in,
but this is not required information.
Instead, this commit discards the old flag classes, and introduces 3 new
classes. The first F_CLASS_NONE, is just a NULL marker value, and is
only used in the NULL marker flag class. The other two flag classes are
F_FLAG_OPTIONAL, and F_FLAG_REQUIRED.
The class F_FLAG_OPTIONAL has the property that at most one of the flags
in the flag set for that class must be present in the instruction. The
"at most" one means that no flags being present is fine.
The class F_FLAG_REQUIRED is not currently used, but will be soon. With
this class, exactly one of the flags from this class must be present in
the instruction. If the flag class contains a single flag, then of
course that flag must be present. However, if the flag class contained
two or more, then one, and only one of them must be present.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Move lnflg, and i
declarations to start of block. Reset code on all flags before
attempting to match them. Handle multiple hits on the same flag.
Handle flag class.
* testsuite/gas/arc/asm-errors.d: New file.
* testsuite/gas/arc/asm-errors.err: New file.
* testsuite/gas/arc/asm-errors.s: New file.
include/ChangeLog:
* opcode/arc.h (flag_class_t): Remove all old flag classes, add 3
new classes instead.
opcodes/ChangeLog:
* arc-opc.c (arc_flag_classes): Convert all flag classes to use
the new class enum values.
This commit introduces the nps400 machine type as a variant of arc.
There's a new flag in the assembler to select this machine type. All
other changes are just adding handling of the new machine type into the
relevant places.
The nps400 is an arc700 variant with some vendor specific instructions
added into the instruction set. This commit does not add any of the new
instructions, this is just laying the groundwork for future commits.
However, in preparation for these new instructions a new opcode define for
nps400 has been added to include/opcode/arc.h, this new opcode define is
used in the assembler and disassembler along with the existing define
for arc700 such that when assembling and disassembling for nps400 the
user will have access to all arc700 instructions and all the nps400
vendor extension instructions.
bfd/ChangeLog:
* archures.c (bfd_mach_arc_nps400): Define.
* bfd-in2.h: Regenerate.
* cpu-arc.c (arch_info_struct): New entry for nps400, renumber
some existing entries to make space.
* elf32-arc.c (arc_elf_object_p): Add nps400 case.
(arc_elf_final_write_processing): Likewise.
binutils/ChangeLog:
* readelf.c (decode_ARC_machine_flags): Handle nps400.
gas/ChangeLog:
* config/tc-arc.c (cpu_types): Add nps400 entry.
(check_zol): Handle nps400.
include/ChangeLog:
* elf/arc.h (E_ARC_MACH_NPS400): Define.
* opcode/arc.h (ARC_OPCODE_NPS400): Define.
opcodes/ChangeLog:
* arc-dis.c (print_insn_arc): Handle nps400.
This commit restructures the selection of the default cpu/mach so that
the choice is made from md_begin (if the user has not provided a command
line choice). This will reduce the amount of change needed in a later
patch.
At the request of Synopsys, the default architecture changes to ARC700
from this commit, previously the default was a non-existent
super-architecture that contained all instructions from all arc
variants. There's some clean up associated with removing the default
merged architecture, and a small test fix now that the default is
ARC700.
binutils/ChangeLog:
* testsuite/binutils-all/objdump.exp (cpus_expected): Add ARC700
to the architecture list.
gas/ChangeLog:
* config/tc-arc.c (arc_target): Delay initialisation until
arc_select_cpu.
(arc_target_name): Likewise.
(arc_features): Likewise.
(arc_mach_type): Likewise.
(cpu_types): Remove "all" entry.
(arc_select_cpu): New function, most of the content is from...
(md_parse_option): ... here. Call new arc_select_cpu.
(md_begin): Call arc_select_cpu if needed, default is now arc700.
include/ChangeLog:
* opcode/arc.h (ARC_OPCODE_BASE): Delete.
opcodes/ChangeLog:
* arc-opc.c (BASE): Delete.
PR target/19721
opcodes * aarch64-tbl.h (aarch64_opcode_table): Fix type of second operand
of MOV insn that aliases an ORR insn.
gas * testsuite/gas/aarch64/pr19721.s: New test source file.
* testsuite/gas/aarch64/pr19721.d: New test driver file.
gas/
* config/tc-arm.c (N_S_32): New.
(N_F_16_32): Likewise.
(N_SUF_32): Support N_F16.
(N_IF_32): Likewise.
(neon_dyadic_misc): Likewise.
(do_neon_cmp): Likewise.
(do_neon_cmp_inv): Likewise.
(do_neon_mul): Likewise.
(do_neon_fcmp_absolute): Likewise.
(do_neon_step): Likewise.
(do_neon_abs_neg): Likewise.
(CVT_FLAVOR_VAR): Likewise.
(do_neon_cvt_1): Likewise.
(do_neon_recip_est): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(neon_check_type): Check architecture support for FP16 extension.
(insns): Update comments.
* testsuite/gas/arm/armv8-2-fp16-simd.s: New test source.
* testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for
arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for
thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection
error file.
opcode/
* arm-dis.c (neon_opcodes): Support new FP16 instructions.
opcodes/
2016-02-24 Renlin Li <renlin.li@arm.com>
* arm-dis.c (print_insn_coprocessor): Check co-processor number for
cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2.
gas/
2016-02-24 Renlin Li <renlin.li@arm.com>
* testsuite/gas/arm/copro.s: Use coprocessor other than 10, 11.
* testsuite/gas/arm/copro.d: Update.
PR target/19561
opcdoe * msp430-dis.c (print_insn_msp430): Add a special case for
decoding an RRC instruction with the ZC bit set in the extension
word.
include * opcode/msp430.h (IGNORE_CARRY_BIT): New define.
(RRUX): Synthesise using case 2 rather than 7.
gas * config/tc-msp430.c (msp430_operands): Remove case 7. Use case 2
to handle encoding of RRUX instruction.
* testsuite/gas/msp430/msp430x.s: Add more tests of the extended
shift instructions.
* testsuite/gas/msp430/msp430x.d: Update expected disassembly.
The calculation of the shift amount, used to insert fields into the
instruction buffer, is not correct when the following conditions are all
true:
- CGEN_INT_INSN_P is defined, and true.
- CGEN_INSN_LSB0_P is true
- Total instruction length is greater than the length of a single
instruction word (the instruction is made of multiple words)
- The word offset is non-zero (the field is outside the first word)
When the above conditions are all true, the calculated shift fails to
take account of the total instruction length.
After this commit the calculation of the shift amount is split into two
parts, first we calculate the shift required to get to BIT0 of the word
in which the field lives, then we calculate the shift required to place
the field within the instruction word.
The change in this commit only effects the CGEN_INT_INSN_P defined true
case, but changes the code for both CGEN_INSN_LSB0_P true, and false.
In the case of CGEN_INSN_LSB0_P being false, the code used to say:
shift = total_length - (word_offset + start + length);
Now it says:
shift_to_word = total_length - (word_offset + word_length);
shift_within_word = word_length - start - length;
shift = shift_to_word + shift_within_word;
From which we can see that in all cases the computed shift value should
be unchanged.
In the case of CGEN_INSN_LSB0_P being true, the code used to say:
shift = (word_offset + start + 1) - length;
Now it says:
shift_to_word = total_length - (word_offset + word_length);
shift_within_word = start + 1 - length;
shift = shift_to_word + shift_within_word;
In the case where 'total_length == word_length' AND 'word_offset ==
0' (which indicates an instruction of a single word), we see that the
computed shift value will be unchanged. However, when the total_length
and word_length are different, and the word_offset is non-zero then the
computed shift value will be different (and correct).
opcodes/ChangeLog:
* cgen-ibld.in (insert_normal): Rework calculation of shift.
* epiphany-ibld.c: Regenerate.
* fr30-ibld.c: Regenerate.
* frv-ibld.c: Regenerate.
* ip2k-ibld.c: Regenerate.
* iq2000-ibld.c: Regenerate.
* lm32-ibld.c: Regenerate.
* m32c-ibld.c: Regenerate.
* m32r-ibld.c: Regenerate.
* mep-ibld.c: Regenerate.
* mt-ibld.c: Regenerate.
* or1k-ibld.c: Regenerate.
* xc16x-ibld.c: Regenerate.
* xstormy16-ibld.c: Regenerate.
Always set the bytes_per_line field (of struct disassemble_info) to the
same constant value, this is inline with the advice contained within
include/dis-asm.h.
Setting this field to a constant value will cause the disassembler
output to be better aligned.
cpu/ChangeLog:
* epiphany.opc (epiphany_print_insn): Set info->bytes_per_line to
a constant to better align disassembler output.
opcodes/ChangeLog:
* epiphany-dis.c: Regenerated from latest cpu files.
gas/ChangeLog:
* testsuite/gas/epiphany/sample.d: Update expected output.
In the instruction to write to the ARMv8.2 PSTATE field UAO,
MSR UAO, #<imm>, the immediate should be either 0 or 1 but GAS accepts
any unsigned 4-bit integer.
This patch implements the constraint on the immediate, generating an
error if the immediate operand is invalid, and adds tests for the
illegal forms.
opcodes/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Check validity
of MSR UAO immediate operand.
gas/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/armv8_2-a-illegal.d: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.l: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.s: New.
Change-Id: Ibdec4967c00b1ef3be9dbc43d23b2c70d1a0b28c
The POOL48A major opcode was defined in early revisions of the 64-bit
microMIPS ISA, has never been implemented, and was removed before the
64-bit microMIPS ISA specification[1] has been finalized.
This complements commit a6c7053929 ("MIPS/opcodes: Remove microMIPS
48-bit LI instruction").
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of
Major Opcode Field", p. 578
gas/
* config/tc-mips.c (micromips_insn_length): Remove the mention
of 48-bit microMIPS instructions.
gdb/
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
opcodes/
* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
instruction support.
* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
instructions that can support stack pointer operations.
* rl78-decode.c: Regenerate.
* rl78-dis.c: Fix display of stack pointer in MOVW based
instructions.
* testsuite/gas/rl78/sp-relative-movw.s: New test.
* testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly.
* testsuite/gas/rl78/rl78.exp: Run the new test.
Some of the RAS system registers added to binutils as part of the ARMv8.2
support are missing the feature checks to warn when they aren't
supported by the target.
This patch adds the missing feature checks with a test to check that
the correct warnings are given for all the ARMv8.2 system registers.
gas/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/illegal-sysreg-2.l: New.
* testsuite/gas/aarch64/illegal-sysreg-2.d: New.
opcodes/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals
testing for RAS support. Add checks for erxfr_el1, erxctlr_el1,
erxtatus_el1 and erxaddr_el1.
Change-Id: I66b590ea49c1eb6b0e5c93e0dc2bc9c4e79a52fe
The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.
gas/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_v8_2): New.
(insns): Add "esb".
* testsuite/gas/arm/armv8_2-a.d: New.
* testsuite/gas/arm/armv8_2-a.s: New.
opcodes/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* arm-dis.c (arm_opcodes): Add "esb".
(thumb_opcodes): Likewise.
Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
For ISA_B/C only the combination #,d(An) is allowed in addition to the
ISA_A combinations for move.b and move.w (and pc-relative is never
allowed as destination).
opcodes/
PR gas/13050
* m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in
addition to ISA_A.
gas/
PR gas/13050
* testsuite/gas/m68k/all.exp: Add tests p13050-1 and p13050-2.
* testsuite/gas/m68k/p13050-1.s: New file.
* testsuite/gas/m68k/p13050-2.d: New file.
* testsuite/gas/m68k/p13050-2.s: New file.
In this GCC commit:
https://gcc.gnu.org/ml/gcc-patches/2015-12/msg00735.html
GCC started emitting dmb instructions with no operands. The intention
was that dmb with no operands should be an alias for 'dmb 0'.
The following patch extends the arc opcodes library to support dmb with
no operands.
opcodes/ChangeLog:
* arc-tbl.h (dmb): Add a no operand version of dmb.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards
to merging with ARMv8-M Baseline.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch
value.
gas/
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
gas/testsuite/
* gas/arm/archv8m-base.d: New file.
* gas/arm/attr-march-armv8m.base.d: Likewise.
* gas/arm/armv8m.base-idiv.d: Likewise.
* gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_BASE): Declare.
include/opcode/
* arm.h (ARM_EXT2_V6T2_V8M): New extension bit.
(ARM_AEXT2_V8A): New architecture extension bitfield.
(ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_AEXT_V8M_BASE): New architecture extension bitfield.
(ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M.
(ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield.
(ARM_ARCH_V6KT2): Likewise.
(ARM_ARCH_V6ZT2): Likewise.
(ARM_ARCH_V6KZT2): Likewise.
(ARM_ARCH_V7): Likewise.
(ARM_ARCH_V7A): Likewise.
(ARM_ARCH_V7VE): Likewise.
(ARM_ARCH_V7R): Likewise.
(ARM_ARCH_V7M): Likewise.
(ARM_ARCH_V7EM): Likewise.
(ARM_ARCH_V8A): Likewise.
(ARM_ARCH_V8M_BASE): New architecture bitfield.
(ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M.
(ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield and reindent.
(ARM_ARCH_V7A_MP_SEC): Likewise.
(ARM_ARCH_V7R_IDIV): Likewise.
(ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex,
ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by
ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust v4t_plus_v6_m and comb array to account
for new TAG_CPU_ARCH_V4T_PLUS_V6_M value. Deal with NULL values in
comb array.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Mainline Tag_CPU_arch
value.
(arm_attr_tag_THUMB_ISA_use): Add ARMv8-M Mainline Tag_THUMB_ISA_use
value.
gas/
* config/tc-arm.c (arm_ext_m): Include ARMv8-M.
(arm_ext_v8m): New feature for ARMv8-M.
(arm_ext_atomics): New feature for ARMv8 atomics.
(do_tt): New encoding function for TT* instructions.
(insns): Add new entries for ARMv8-M specific instructions and
reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
(arm_archs): Define armv8-m.main architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
clarify the ordering rule.
(aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting
Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile
to 'A' if extension bit for atomic instructions is set, unless it is
ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0
for ARMv8-M Mainline.
gas/testsuite/
* gas/arm/archv8m.s: New file.
* gas/arm/archv8m-main.d: Likewise.
* gas/arm/attr-march-armv8m.main.d: Likewise.
* gas/arm/any-armv8m.s: Likewise.
* gas/arm/any-armv8m.d: Likewise.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_MAIN): Declare.
(MAX_TAG_CPU_ARCH): Define to TAG_CPU_ARCH_V8M_MAIN.
(TAG_CPU_ARCH_V4T_PLUS_V6_M): Define to unused value 15.
include/opcode/
* arm.h (ARM_EXT2_ATOMICS): New extension bit.
(ARM_EXT2_V8M): Likewise.
(ARM_EXT_V8): Adjust comment with regards to atomics and remove
mention of legacy use for that bit.
(ARM_AEXT2_V8_1A): New architecture extension bitfield.
(ARM_AEXT2_V8_2A): Likewise.
(ARM_AEXT_V8M_MAIN): Likewise.
(ARM_AEXT2_V8M): Likewise.
(ARM_ARCH_V8A): Use ARM_EXT2_ATOMICS for features in second bitfield.
(ARM_ARCH_V8_1A): Likewise with ARM_AEXT2_V8_1A.
(ARM_ARCH_V8_2A): Likewise with ARM_AEXT2_V8_2A.
(ARM_ARCH_V8M_MAIN): New architecture feature bitfield.
(ARM_ARCH_V8A_FP): Use ARM_EXT2_ATOMICS for features in second bitfield
and reindent.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
(ARM_ARCH_V8_1A_FP): Use ARM_AEXT2_V8_1A to set second bitfield of
feature bits.
(ARM_ARCH_V8_1A_SIMD): Likewise.
(ARM_ARCH_V8_1A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard lda, ldab, ldaex, ldaexb, ldaexh, stl,
stlb, stlh, stlex, stlexb and stlexh by ARM_EXT2_ATOMICS instead of
ARM_EXT_V8.
(thumb32_opcodes): Add entries for wide ARMv8-M instructions.
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch extends
instructions in the group Adv.SIMD Scalar Shift By Immediate to support
FP16, making this support available when +simd+fp16 is enabled.
The extended instructions are: SCVTF, FCVTZS, UCVTF and FCVTZU.
The general form for these instructions is
<OP> <Hd>, <Hs>, #<imm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16: Add tests for Adv.SIMD scalar shift
by immediate instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SSHIFT_H): New.
(aarch64_opcode_table): Add fp16 versions of scvtf, fcvtzs, ucvtf
and fcvtzu to the Adv.SIMD scalar shift by immediate group.
Change-Id: I40506496f52dd96909e7344f243b38a1870df7ff
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch extends
instructions in the group Adv.SIMD Shift By Immediate to support FP16,
making this support available when +simd+fp16 is enabled.
The new instructions legal make some uses of the 4h vector type that had
been invalid. This patch adjusts a test that checks for these uses.
The extended instructions are: SCVTF, FCVTZS, UCVTF and FCVTZU.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>, #<imm>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD across lanes
instructions.
* gas/aarch64/illegal.d: Update expected output.
* gas/aarch64/illegal.s: Replace tests for illegal use of 'h'
specifier.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_VSHIFT_H): New.
(aarch64_opcode_table): Add fp16 versions of scvtf, fcvtzs, ucvtf
and fcvtzu to the Adv.SIMD shift by immediate group.
Change-Id: I3480f63883d54db46562573185da6982f2365ee8
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Adv.SIMD Scalar Pairwise, making them
available when +simd+fp16 is enabled.
The instructions added are: FMAXNMP, FADDP, FMAXP, FMINNMP and FMINP
The general form for these instructions is
<OP> <Hd>, <V>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD Scalar
Pairwise instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SISD_PAIR_H): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnmp, faddp,
fmaxp, fminnmp, fminp to the Adv.SIMD scalar pairwise group.
Change-Id: I19937ede3441b66dd0f940269ece895b17d3c345
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. The FP16 additions to the
scalar pairwise group introduce a new vector type, 2H. This patch adds
support for this vector type to binutils.
The patch adds a new operand qualifier to the enum
aarch64.h:aarch64_opnd_qualifier. This interferes with the calculation
used by aarch64-dis.c:get_vreg_qualifier_from_value, called when
decoding an instruction. Since the new vector type is only used in FP16
scalar pairwise instructions which do not require the function, this
patch adjusts the function to ignore the new qualifier.
gas/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_neon_type_for_operand): Adjust to
take into account new vector type 2H.
(vectype_to_qualifier): Likewise.
include/opcode/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (enum aarch64_opnd_qualifier): Add
AARCH64_OPND_QLF_V_2H.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.coM>
* aarch64-dis.c (get_vreg_qualifier_from_value): Update comment
and adjust calculation to ignore qualifier for type 2H.
* aarch64-opc.c (aarch64_opnd_qualifier): Add "2H".
Change-Id: Idf9a3694732962c80fde04f08c7304de9164f126
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds an FP16
instruction to the group Adv.SIMD Modified Immediate, making it
available when +simd+fp16 is enabled.
The instruction added is: FMOV.
The form of this instructions is
<OP> <Hd>, #<imm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD modified immediate
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SIMD_IMM_H): New.
(aarch64_opcode_table): Add fp16 version of fmov to the Adv.SIMD
modified immediate group.
Change-Id: Ic66af44c494e6a53fb1cf01c372cdc62d12643e2
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Adv.SIMD Across Lanes, making them available
when +simd+fp16 is enabled.
The instructions added are: FMAXNMV, FMAXV, FMINNMV and FMINV.
The general form for these instructions is
<OP> <Hd>, <V>.<T>
where T is 4h or 8h.
The new instructions valid make uses of the 8H and 4H that were
previously illegal. The patch adjusts a test for illegal uses of vector
types to take this into account.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD across lanes
instructions.
* gas/aarch64/illegal.d: Update expected output.
* gas/aarch64/illegal.s: Replace test for illegal use of 'h'
specifier.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_XLANES_FP_H): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnmv, fmaxv,
fminnmv, fminv to the Adv.SIMD across lanes group.
Change-Id: Ib9a47e867f55e0272c2446eb7e16837503d2f94c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Indexed Element, making them available
when +simd+fp16 is enabled.
The instructions added are: FMLA, FMLS, FMUL and FMULX.
The general form for these instructions is
<OP> <Hd>, <Hs>, <V>.h[<idx>]
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar indexed element
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarch64_opcode_table): Add fp16 versions of fmla,
fmls, fmul and fmulx to the scalar indexed element group.
Change-Id: I6a4ee20a9ae1019b89d0fd05da55222f267c5627
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Indexed Element, making them available
when +simd+fp16 is enabled.
The instructions added are: FMLA, FMLS, FMUL and FMULX.
The general form for these instructions is
<OP> <V>.<T>, <V>.<T>, <V>.h[<idx>]
where T is 4h or 8h
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for vector indexed element
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_ELEMENT_FP_H): New.
(aarch64_opcode_table): Add fp16 versions of fmla, fmls, fmul and
fmulx to the vector indexed element group.
Change-Id: Ib70cd4eaa6ea2938f84ac41f31d72644dbb0ceb4
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Two Register Misc, making them
available when +simd+fp16 is enabled.
The instructions added are: FCMGT, FCMGE, FCMEQ, FCMLE, FCMLT, FCVTNS,
FCVTNU, FCVTPS, FCVTPU, FCVTMS, FCVTMU, FCVTZS, FCVTZU, FCVTAS, FCVTAU,
SCVTF, UCVTF, FRECPE, FRSQRTE and FRECPX.
The general form for these instructions is
<OP> <Hd>, <Hs>
or
<OP> <Hd>, <Hs>, #0.0
Tested the series for aarch64-none-linux-gnu with cross-compiled
check-binutils and check-gas.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar two register misc.
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SISD_FCMP_H_0): new.
(QL_S_2SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of fcvtns, fcvtms,
fcvtas, scvtf, fcmgt, fcmeq, fcmlt, fcvtps, fcvtzs, frecpe,
frecpx, fcvtnu, fcvtmu, fcvtau, ucvtf, fcmge, fcmle, fcvtpu,
fcvtzu and frsqrte to the scalar two register misc. group.
Change-Id: I19b25baae33027ce1bade68cc8dc47a4321d045c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Two Register Misc, making them
available when +simd+fp16 is enabled.
The instructions added are: FCMGT, FCMGE, FCMEQ, FCMLE, FCMLT, FABS,
FNEG, FRINTN, FRINTA, FRINTP, FRINTM, FRINTX, FRINTZ, FRINTI, FCVTNS,
FCVTNU, FCVTPS, FCVTPU, FCVTMS, FCVTMU, FCVTZS, FCVTZU, FCVTAS, FCVTAU,
SCVTF, UCVTF, FRECPE, FRSQRTE and FSQRT.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for vector two register misc.
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_V2SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of frintn, frintm,
fcvtns, fcvtms, fcvtas, scvtf, fcmgt, fcmeq, fcmlt, fabs, frintp,
frintz, fcvtps, fcvtzs, frecpe, frinta, frintx, fcvtnu, fcvtmu,
fcvtau, ucvtf, fcmge, fcmle, fneg, frinti, fcvtpu, fcvtzu, frsqrte
and fsqrt to the vector register misc. group.
Change-Id: I0267511a7f7ea14247504d29fe4752e84c9af9ad
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Three Register Same, making them
available when +simd+fp16 is enabled.
The instructions added are: FABD, FMULX, FCMEQ, FCMGE, FCMGT, FACGE,
FACGT, FRECPS and FRSQRTS.
The general form for these instructions is
<OP> <Hd>, <Hs>, <Hm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar three register same
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarch64_opcode_table): Add fp16 versions of
fmulx, fcmeq, frecps, frsqrts, fcmge, facge, fabd, fcmgt and
facgt to the scalar three same group.
Change-Id: I155eb8d7c1e9a7c89d691d7e4aae83be51ff1238
ARMv8.2 adds 16-bit floating point operations as an optional extension
to floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Three Register Same, making them
available when +simd+fp16 is enabled.
The instructions added are: FMAXNM, FMAXNMP, FNMINNM, FMINNMP, FMLA,
FMLS, FADD, FADDP, FSUB, FABD, FMULX, FMUL, FCMEQ, FCMGE, FCMGT, FACGE,
FACGT, FMAX, FMAXP, FMIN, FMINP, FRECPS, FDIV and FRSQRTS.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>, <Vm>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: New.
* gas/aarch64/advsimd-fp16.s: New.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_V3SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnm, fmla, fadd,
fmulx, fcmeq, fmax, frecps, fminnm, fmls, fsub, fmin, frsqrts,
fmaxnmp, faddp, fmul, fcmge, facge, fmaxp, fdiv, fminnmp, fabd,
fcmgt, facgt and fminp to the vector three same group.
Change-Id: I3f1c5fe82ca73f7a17fe5329cf2b0de03c94328c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to floating point and Adv.SIMD support. This patch set adds the 16-bit
Adv.SIMD vector and scalar instructions to binutils, making them
available when both +simd and +fp16 architecture extensions are enabled.
The series also adds support for a new vector type, 2H, used by the FP16
scalar pairwise instructions.
The patches in this series:
- Add a FP16 Adv.SIMD feature macro for use by the encoding/decoding
routines.
- Add FP16 instructions in the group Vector Three Register Same.
- Add FP16 instructions in the group Scalar Three Register Same.
- Add FP16 instructions in the group Vector Two Register Misc.
- Add FP16 instructions in the group Scalar Two Register Misc.
- Add FP16 instructions in the group Vector Indexed Element.
- Add FP16 instructions in the group Scalar Indexed Element.
- Add FP16 instructions in the group Adv.SIMD Across Lanes.
- Add FP16 instructions in the group Adv.SIMD Modified Immediate.
- Rework some code for handling vector types to weaken its assumptions
about available vector-types.
- Add support for the 2H vector type.
- Add FP16 instructions in the group Adv.SIMD Scalar Pairwise.
- Add FP16 instructions in the group Adv.SIMD Shift By Immediate.
- Add a FP16 instructions in the group Adv.SIMD Scalar Shift By
Immediate.
This patch adds the feature macro SIMD_F16 to the AArch64
encoding/decoding routines. It is used to decide when the new
instructions are available to the assembler and is true when both +simd
and +fp16 are selected.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-tbl.h (aarch64_feature_simd_f16): New.
(SIMD_F16): New.
Change-Id: Iee5a37928418f15e51dfaa927b24cafef7295e8f
A mistake with rebasing the ARMv8.2 AT instruction patch left this part
+ /* AT S1E1RP, AT S1E1WP. Values are from aarch64_sys_regs_at. */
+ if ((reg->value == CPENS (0, C7, C9, 0)
+ || reg->value == CPENS (0, C7, C9, 1))
+ && !AARCH64_CPU_HAS_FEATURE (features, AARCH64_FEATURE_V8_2))
+ return FALSE;
in aarch64_pstatefield_supported_p rather than in
aarch64_sys_ins_reg_supported_p, where it was supposed to be.
The patch adding support for id_aa64mmfr2_el1, also had the effect of
removing a conditional branch in aarch64_sys_reg_supported_p.
The effect of both of these is to suppress an error if some ARMv8.2
system registers are used with the wrong -march settings.
This patch fixes these mistakes.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg_supported_p): Add mistakenly
removed statement.
(aarch64_pstatefield_supported_p): Move feature checks for AT
registers ..
(aarch64_sys_ins_reg_supported_p): .. to here.
Change-Id: I48783d118eaaf0f3312e8b08a8340ef7af4e36a4
This is a workaround for a gcc bug.
PR 19359
* ppc-opc.c (insert_fxm): Remove "ignored" from error message.
(powerpc_opcodes): Remove single-operand mfcr.
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds the instruction to
binutils as a HINT alias that takes an operand.
A new operand type, AARCH64_OPND_BARRIER_PSB, is added to represent the
operand to PSB. A parser for the operand type is added to the assembler
and a printer to the disassembler. The operand name "csync" is added to
the list of HINT options with HINT number #17. Encoding and decoding of
the operand is handled by the ins_hint/ext_hint functions added in the
preceding patches.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
(parse_barrier_psb): New.
(parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
(md_begin): Set up aarch64_hint_opt_hsh.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: Enable the statistical profiling
extension. Update the expected output.
* gas/aarch64/system-2.s: Add tests for PSB CSYNC.
* gas/aarch64/system.d: Update the expected output.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_opnd): Add AARCH64_OPND_BARRIER_PSB.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (aarch64_hint_options): Add "csync".
(aarch64_print_operands): Handle AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_feature_stat_profile): New.
(STAT_PROFILE): New.
(aarch64_opcode_table): Add "psb".
(AARCH64_OPERANDS): Add "BARRIER_PSB".
Change-Id: I5ffb672d26a8b15b48785478d359350a9b70ca09
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds support for aliases
of HINT which take an operand, adding a table to store operand names and
their matching hint number as well as encoding and decoding functions
for such operands. Parsing and printing the operands are deferred to any
support added for aliases with such operands.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_hint_options): Declare.
(aarch64_opnd_info): Add field hint_option.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm.c (aarch64_ins_hint): New.
* aarch64-asm.h (aarch64_ins_hint): Declare.
* aarch64-dis.c (aarch64_ext_hint): New.
* aarch64-dis.h (aarch64_ext_hint): Declare.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (aarch64_hint_options): New.
* aarch64-tbl.h (AARCH64_OPERANDS): Fix typos.
Change-Id: I2205038fc1c47d3025d1f0bc2fbf405b5575b287
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. The HINT instruction currently has 8
aliases, which is the maximum number allowed. This patch raises to 16
the limit on the number of aliases an instruction can have.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-gen.c (find_alias_opcode): Set max_num_aliases to 16.
Change-Id: I131044bf6e0fe0940a9e7478d9bf52137748907d
The Statistical Profile extension included in the ARMv8.2 architecture
adds a number of system registers. This patch adds the registers to
binutils, making them available when the architecture extension
"+profile" is enabled.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg): Add pbmlimitr_el1, pmbptr_el1,
pmbsr_el1, pmbidr_el1, pmscr_el1, pmsicr_el1, pmsirr_el1,
pmsfcr_el1, pmsevfr_el1, pmslatfr_el1, pmsidr_el1, pmscr_el2 and
pmscr_el2.
(aarch64_sys_reg_supported_p): Add architecture feature tests for
the new registers.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.s: Add tests for the statistical profiling
system registers.
* gas/aarch64/sysreg-2.d: Enable the statistical profiling
extension and update the expected output.
Change-Id: Ibf23ad34db7c33f0fcd30010b796748b38be6efb
ARMv8.2 adds new instructions AT S1E1RP and AT S1E1WP to Aarch64. This
patch adds support for the instructions, making them available when
-march=armv8.2-a is selected.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Update for new tests for AT S1E1RP and
AT S1E1WP.
* gas/aarch64/sysreg-2.s: Add tests for AT S1E1RP and AT S1E1WP.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs_at): Add "s1e1rp" and "s1e1wp".
(aarch64_sys_ins_reg_supported_p): Add ARMv8.2 system register
feature test for "s1e1rp" and "s1e1wp".
Change-Id: I09e1044b629ab0a34b03c423e8d4e71ff92daad4
ARMv8.2 adds the new system instruction DC CVAP. This patch adds support
for the instruction to binutils, enabled when -march=armv8.2-a is
selected.
gas/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_sys_ins_reg): Add check of
architectural support for system register.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Add tests for dc instruction.
* gas/aarch64/sysreg-2.s: Add uses of dc instruction.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_sys_ins_reg_supported_p): Declare.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): Add "cvap".
(aarch64_sys_ins_reg_supported_p): New.
Change-Id: I3158b97d9bbee9644c2d0e2986db807412ef1053
ARMv8.2 adds the new system instruction DC CVAP. This patch series adds
support for this instruction to binutils, enabled when -march=armv8.2-a
is selected.
The AArch64 binutils record of some system registers uses a boolean
value to hold the single flag currently supported for them. To allow
these registers to be limited to specific architectures, the first patch
in this series replaces the boolean flag with a bitset and feature test.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_sys_ins_reg): Replace has_xt with flags.
(aarch64_sys_ins_reg_has_xt): Declare.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-dis.c (aarch64_ext_regrt_sysins): Replace use of has_xt
with aarch64_sys_ins_reg_has_xt.
(aarch64_ext_sysins_op): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Likewise.
(F_HASXT): New.
(aarch64_sys_regs_ic): Update for changes to aarch64_sys_ins_reg.
(aarch64_sys_regs_dc): Likewise.
(aarch64_sys_regs_at): Likewise.
(aarch64_sys_regs_tlbi): Likewise.
(aarch64_sys_ins_reg_has_xt): New.
Change-Id: I363637a6c3f54d7ffff953b3a0734e8139cae819
ARMv8.2 adds a new control bit PSTATE.UAO. This patch adds support for
this bit to binutils, following the same basic pattern as for
PSTATE.PAN. The new control bit is only available when -march=armv8.2-a
is specified.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/uao-directive.d: New.
* gas/aarch64/uao.d: New.
* gas/aarch64/uao.s: New.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "uao".
(aarch64_sys_reg_supported_p): Add comment. Add checks for "uao".
(aarch64_pstatefields): Add "uao".
(aarch64_pstatefield_supported_p): Add checks for "uao".
Change-Id: Id571628ac5227b78aaf1876e85d15d7b6c0a2896
The ARMv8.2 RAS extension adds a number of new registers. This patch
adds the registers and makes them available whenever the RAS extension
is enabled, as it is when -march=armv8.2-a is selected.
The new registers are:
erridr_el1, errselr_el1, erxfr_el1, erxctlr, erxaddr_el1,
erxmisc0_el1, erxmisc1_el1, vsesr_el2, disr_el1 and
vdisr_el2.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Add tests for new registers.
* gas/aarch64/sysreg-2.s: Likewise. Also replace some spaces with
tabs.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "vsesr_el2", "erridr_el1",
"errselr_el1", "erxfr_el1", "erxctlr", "erxaddr_el1",
"erxmisc0_el1", "erxmisc1_el1", "disr_el1" and "vdisr_el2".
(aarch64_sys_reg_supported_p): Add architecture feature tests for
new registers.
Change-Id: I8a01a0f0ee7987f89eead32650f6afcc749b3c74
The ARMv8.2 RAS extension adds a new barrier instruction ESB as an alias
and the preferred form of HINT 16.
This patch adds an architectural feature flag for the RAS extension and
includes it in the features selected enabled by -march=armv8.2-a. It
also adds the ESB instruction, making it available whenever the RAS
feature is enabled.
Because ESB is the preferred form and because the target architecture
isn't available to the disassembler, HINT 16 will be disassembled as ESB
even when the target has no support for the RAS extension.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: New.
* gas/aarch64/system-2.s: New.
* gas/aarch64/system.d: Adjust expected output for HINT 16.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_RAS): New.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_RAS.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-tbl.h (aarch64_feature_ras): New.
(RAS): New.
(aarch64_opcode_table): Add "esb".
Change-Id: Id4713917da15cca3b977284f43febd1c9b3d9faf
The idea being to put instructions that have the same encoding adjacent
to each other.
* opcodes/ppc-opc.c (powerpc_opcodes): Sort power9 insns by
major opcode/xop.
ARMv8.2 adds 16-bit floating point operations as an optional
extension. This patch adjusts the utility function expand_fp_imm to
support 16-bit values.
The function is intended to convert an 8-bit immediate representing a
floating point value to a representation that can be passed to
fprintf. Because of the limited use of the results, the only change made
to the function is to treat a request for a 16-bit float as a request
for a 32-bit float.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (half_conv_t): New.
(expand_fp_imm): Replace is_dp flag with the parameter size to
specify the number of bytes for the required expansion. Treat
a 16-bit expansion like a 32-bit expansion. Add check for an
unsupported size request. Update comment.
(aarch64_print_operand): Update to support 16-bit floating point
values. Update for changes to expand_fp_imm.
Change-Id: I1ae3df3864be375d71925197ab03397ed1ad2d15
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the ARMv8 FP support. This patch set adds support for the 16-bit FP
instructions to binutils, enabling the instructions when both +fp and
+fp16 architecture extensions are enabled.
The patches in this series:
- Add a feature macro for use by the encoding/decoding mechanism.
- Adjust a utility function, used when disassembling, to support 16-bit
floating point values.
- Add the new scalar floating-point instructions.
This patch adds the feature macro FP_F16 to the AArch64 encoding/decoding
mechanism, enabling it when both +fp and +fp16 are selected.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-tbl.h (aarch64_feature_fp_f16): New.
(FP_F16): New.
Change-Id: Ie370e43e3d77a7d54b4416b4be901b363a37f3d5
This patch adds the alias REV64 <Rd>, <Rs> as an alias for REV <Rd>,
<Rs>. However, REV is still the preferred form for the instruction.
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: Add tests for REV.
* gas/aarch64/alias-2.s: Likewise.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarchr64_opcode_table): Update "rev", add
"rev64".
Change-Id: I331567c8d3618ba9fec1673c6e0b5977222dde61
ARMv8.2 adds two new instructions: BFC as an alias for BFM and REV64 as
an alias for REV. This patch set adds support for these to binutils,
enabled when the -march=armv8.2-a is given. It depends on the support
for an instruction being its preferred form which was added in an
earlier patch.
This patch adds the alias BFC <Rd>, #<imm>, #<width> as the preferred
form for BFM when the source is a zero register and the conditions for
using the BFI form are met (in other words, BFC is the preferred form
for BFI <Rd>, <Rs>, #<imm>, #<width> when the <Rs> is a zero register).
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: New.
* gas/aarch64/alias-2.s: New.
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_op): Add OP_BFC.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-asm.c (convert_bfc_to_bfm): New.
(convert_to_real): Add case for OP_BFC.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c: (convert_bfm_to_bfc): New.
(convert_to_alias): Add case for OP_BFC.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (operand_general_constraint_met_p): Weaken assert
to allow width operand in three-operand instructions.
* aarch64-tbl.h (QL_BF1): New.
(aarch64_feature_v8_2): New.
(ARMV8_2): New.
(aarch64_opcode_table): Add "bfc".
Change-Id: I6efe318b2538ba11f0caece7c6d70957441c872b
Although the AArch64 backend supports aliased instructions, the aliasing
forms are always preferred over the real instruction. This makes it
awkward to handle instructions which have aliases but which are their
own preferred form.
This patch includes the instruction being aliased in the list of
alternatives which is searched when considering which form to use.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c: Weaken assert.
* aarch64-gen.c: Include the instruction in the list of its
possible aliases.
Change-Id: I1f23eb25fccef76a64d3d732d58761bd25fad94e
ARMv8.2 adds a new system register id_aa64mmfr2_el1. This patch adds
support for the register to binutils, making it available when
-march=armv8.2-a is selected.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "id_aa64mmfr2_el1".
(aarch64_sys_reg_supported_p): Add ARMv8.2 system register
feature test.
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: New.
* gas/aarch64/sysreg-2.s: New.
Change-Id: I767f18a60e2bd70ce74c89f6abfe07afdc9e601f
The ARMv8.1 architecture includes the Virtualization Host Extensions
which add a number of system registers. This patch adds support for
these system registers, making them available when -march=armv8.1-a is
selected.
include/opcode/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_V8_1): New.
(AARCH64_ARCH_v8_1): Add AARCH64_FEATURE_V8_1.
opcodes/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add spsr_el12, elr_el12,
sctlr_el12, cpacr_el12, ttbr1_el2, ttbr0_el12, ttbr1_el12,
tcr_el12, afsr0_el12, afsr1_el12, esr_el12, far_el12, mair_el12,
amair_el12, vbar_el12, contextidr_el2, contextidr_el12,
cntkctl_el12, cntp_tval_el02, cntp_ctl_el02, cntp_cval_el02,
cntv_tval_el02, cntv_ctl_el02, cntv_cval_el02, cnthv_tval_el2,
cnthv_ctl_el2, cnthv_cval_el2.
(aarch64_sys_reg_supported_p): Update for the new system
registers.
gas/testsuite/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/virthostext-directive.d: New.
* gas/aarch64/virthostext.d: New.
* gas/aarch64/virthostext.s: New.
Change-Id: Iecb370591b1b6e9e00d81c8ccd9ae3b0f71794a2
The support for accessing the ARMv8.1 PSTATE field PAN allows
instructions of the form MSR PAN, #<imm> with <imm> any unsigned 4-bit
integer. However, the architecture specification requires that the
immediate is either 0 or 1.
This patch implements the constraint on the immediate, generating an
error if the immediate operand is invalid, and adds tests for the
illegal forms.
opcodes/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Check validity
of MSR PAN immediate operand.
gas/testsuite/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/pan-illegal.d: New.
* gas/aarch64/pan-illegal.l: New.
* gas/aarch64/pan.s: Add tests for invalid immediates.
Change-Id: Ibb3056c975eb792104da138d94594224f56a993e
opcode * rx.h (enum RX_Operand_Type): Add RX_Operand_Zero_Indirect.
opcodes * rx-decode.opc (rx_disp): If the displacement is zero, set the
type to RX_Operand_Zero_Indirect.
* rx-decode.c: Regenerate.
* rx-dis (print_insn): Handle RX_Operand_Zero_Indirect.
gas * config/rx-parse.y: Allow zero value for 5-bit displacements.
tests * gas/rx/mov.sm: Add tests for zero offset indirect moves.
* gas/rx/mov.d: Update expected output.
Nowadays aarch64_decode_insn is a public interface used by both
opcodes and gdb. However, its behaviour relies on a global variable
no_aliases, which isn't a good practise. On the other hand, In default,
no_aliases is zero, but in GDB, we do want no alias when decoding
instructions for prologue analysis (patches to be posted), so that we
can handle both instructions "add" and "mov" (an alias of "add") as
"add". The code in GDB can be simplified.
This patch adds a new argument in aarch64_decode_insn, and pass no_aliases
to it. In GDB side, always pass 1 to it.
include/opcode:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64.h (aarch64_decode_insn): Update declaration.
opcodes:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (aarch64_decode_insn): Add one argument
noaliases_p. Update comments. Pass noaliases_p rather than
no_aliases to aarch64_opcode_decode.
(print_insn_aarch64_word): Pass no_aliases to
aarch64_decode_insn.
gdb:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Pass 1 to
aarch64_decode_insn.
PR binutils/19159
opcodes * rl78-decode.opc (MOV): Added offset to DE register in index
addressing mode.
* rl78-decode.c: Regenerate.
test * gas/rl78/pr19159.s: New test source file.
* gas/rl78/pr19159.d: New test case.
* gas/rl78/rl78.exp: Run the new test.
PR binutils/19158
opcodes * rl78-decode.opc: Add 's' print operator to instructions that
access system registers.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78_common): Decode all system
registers.
tests * gas/rl78/pr19158.s: New test source file.
* gas/rl78/pr19158.d: New test case.
* gas/rl78/rl78.exp: Run the new test.
PR binutils/19157
opcodes * rl78-decode.opc: Add 'a' print operator to mov instructions
using stack pointer plus index addressing.
* rl78-decode.c: Regenerate.
tests * gas/rl78: New directory.
* gas/rl78/rl78.exp: New test driver.
* gas/rl78/pr19157.s: New test source file.
* gas/rl78/pr19157.d: New test case.
opcodes/ChangeLog:
2015-10-14 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Fix comment.
* s390-opc.txt: Change instruction type for troo, trot, trto, and
trtt to RRF_U0RER since the second parameter does not need to be a
register pair.
gas/testsuite/ChangeLog:
2015-10-14 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* gas/s390/esa-g5.d: Use odd GPR for the second operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
'template' is used in include/opcode/aarch64.h as below,
typedef struct
{
const char *template;
uint32_t value;
int has_xt;
} aarch64_sys_ins_reg;
and it triggers compilation errors when GDB is built in C++ mode.
In file included from git/gdb/aarch64-tdep.c:62:0:
git/gdb/../include/opcode/aarch64.h:651:15: error: expected unqualified-id before 'template'
const char *template;
This patch is to rename field template to name.
gas/
* config/tc-aarch64.c (md_begin): Access field 'name' rather
than 'template'.
include/opcode/
* aarch64.h (aarch64_sys_ins_reg) <template>: Removed.
<name>: New field.
opcodes/
* aarch64-dis.c (aarch64_ext_sysins_op): Access field
'name' rather than 'template'.
* aarch64-opc.c (aarch64_print_operand): Likewise.
We want to use disas_aarch64_insn inside GDB to decode instructions, so
this patch exposes it and rename it to aarch64_decode_insn to follow
the conventions of other interfaces.
include/opcode:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64.h (aarch64_decode_insn): Declare it.
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove static. Change
argument insn type to aarch64_insn. Rename to ...
(aarch64_decode_insn): ... it.
(print_insn_aarch64_word): Caller updated.
I happen to see that argument pc is not used inside disas_aarch64_insn
at all. This patch is to remove it.
OK to apply?
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove argument PC.
(print_insn_aarch64_word): Caller updated.
gas * doc/c-s390.texi: Add documentation.
Add missing code markup.
* config/tc-s390.c (current_flags): New static variable.
(s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
(s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
Fix indentation.
(md_parse_option): Call s390_parse_cpu with the new signature.
(s390_machine): Likewise.
Keep track of current_flags.
Simplify code a bit.
undefine MAX_HISTORY at end of function.
(s390_machinemode): undefine MAX_HISTORY at end of function.
Update an error message.
tests * gas/s390/s390.exp: Add new tests.
* gas/s390/machine-parsing-1.s: New test file.
* gas/s390/machine-parsing-1.l: Likewise.
* gas/s390/machine-parsing-2.s: Likewise.
* gas/s390/machine-parsing-2.l: Likewise.
* gas/s390/machine-parsing-3.s: Likewise.
* gas/s390/machine-parsing-3.l: Likewise.
* gas/s390/machine-parsing-4.s: Likewise.
* gas/s390/machine-parsing-4.l: Likewise.
* gas/s390/machine-parsing-5.s: Likewise.
* gas/s390/machine-parsing-5.l: Likewise.
* gas/s390/machine-parsing-6.s: Likewise.
* gas/s390/machine-parsing-6.l: Likewise.
opcode * s390.h (S390_INSTR_FLAG_HTM): New flag.
(S390_INSTR_FLAG_VX): New flag.
(S390_INSTR_FLAG_FACILITY_MASK): New flag mask.
opcodes * s390-mkopc.c (main): Parse htm and vx flag.
* s390-opc.txt: Mark instructions from the hardware transactional
memory and vector facilities with the "htm"/"vx" flag.
This fixes the instruction format for 3 of the compare and branch
extended mnemonics. That way the extended mnemonics are actually
being found by objdump.
gas/testsuite/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* gas/s390/zarch-z10.d: Fix testcase for some of the compare and
branch extended mnemonics.
opcodes/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.txt: Fix instruction format of crj*, clrj*, and clgrj*.
This is cleanup only.
opcodes/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Remove unused (and broken) F_20 and FE_20 operand
types and adjust numbering accordingly. Fix some comments.
This makes objdump to be able to recognize some of the extended
mnemonics more often. It does not lead to wrong being generated.
opcodes/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Fix MASK_RIE_R0PI and MASK_RIE_R0PU.
gas/testsuite/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* gas/s390/zarch-z10.d: Fix testcase for compare and branch
extended mnemonics.
This is a NOP change only relevant when reading the file or parsing it
with other tools.
opcodes/ChangeLog:
2015-09-09 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Add OP32 definition.
* s390-opc.txt: Reduce the opcode padding of some extended
mnemonics from 6 to the actual length (which is 4).
opcodes/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (print_insn_sparc): Handle the privileged register
%pmcdper.
gas/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (priv_reg_table): New privileged register
%pmcdper.
gas/testsuite/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* gas/sparc/wrpr.s: Test writing to the privileged %pmcdper
register.
* gas/sparc/wrpr.d: ...and the expected result.
* gas/sparc/rdpr.s: Test reading from the privileged %pmcdper
register.
* gas/sparc/rdpr.d: ...and the expected result.
opcodes * i386-dis.c (print_insn): Fix decoding of three byte operands.
tests * gas/i386/intel.s: Add test of disassembly of a potential
three byte instuction at the end of a function.
* gas/i386/intel.d: Update expected disassembly.
HJ recently removed trailing space in binutils files, but unfortunately
they return when regenerating files in opcodes. This fixes the regen
process.
* cgen.sh: Trim trailing space from cgen output.
* ia64-gen.c (print_dependency_table): Don't generate trailing space.
(print_dis_table): Likewise.
* opc2c.c (dump_lines): Likewise.
(orig_filename): Warning fix.
* ia64-asmtab.c: Regenerate.
opcodes * arm-dis.c (print_insn_arm): Disassembling for all targets V6
and higher with ARM instruction set will now mark the 26-bit
versions of teq,tst,cmn and cmp as UNPREDICTABLE.
(arm_opcodes): Fix for unpredictable nop being recognized as a teq.
test * gas/arm/nops.d: New.
* gas/arm/nops.s: New.
* gas/arm/inst.d: Changed expectation file for 26-bit teq,
tst, cmn and cmp.
gas/testsuite/
PR binutils/13571
* gas/i386/i386.exp: Run i386-intel and x86_64-intel.
* gas/i386/i386-intel.d: New file.
* gas/i386/x86_64-intel.d: Likewise.
opcodes/
PR binutils/13571
* i386-dis.c (MOD_0FC3): New.
(PREFIX_0FC3): Renamed to ...
(PREFIX_MOD_0_0FC3): This.
(dis386_twobyte): Replace PREFIX_0FC3 with MOD_0FC3.
(prefix_table): Replace Ma with Ev on movntiS.
(mod_table): Add MOD_0FC3.
opcodes * arm-dis.c (print_insn_coprocessor): Added support for quarter
float bitfield format.
(coprocessor_opcodes): Changed VFP vmov reg,immediate to use new
quarter float bitfield format.
tests * gas/arm/vfpv3-const-conv.d: Update expected result due to change
of comment for vmov reg,immediate with VFP coprocessor.
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
ISA 2.07 added a new category called Elemental Memory Barriers that modifies
the sync instruction to accept an additional operand ESYNC. Edmar added
support for this insruction varient here:
https://sourceware.org/ml/binutils/2012-02/msg00221.html
Looking at this closer, I see that the insert_ls() function is misnamed
(since it's attached to the ESYNC operand, not the LS operand) but more
importantly, it is silently modifying the LS operand value behind the
users back when the LS operand is either invalid or is incompatible with
the new ESYNC operand. The ISA 2.07 doc has an Assembler Note that clearly
states that assemblers that support the ESYNC operand should report all
invalid uses of LS and ESYNC. This patch changes the assembler to
error out on invalid and incompatible operand usage.
opcodes/
* ppc-opc.c (insert_ls): Test for invalid LS operands.
(insert_esync): New function.
(LS, WC): Use insert_ls.
(ESYNC): Use insert_esync.
gas/testsuite/
* gas/ppc/e6500.s <sync>: Fix invalid test.
* gas/ppc/e6500.d: Likewise.
include * dis-asm.h (struct disassemble_info): Add stop_vma field.
binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the
disassemble_info structure when disassembling code sections with
-d.
* doc/binutils.texi (objdump): Document the discrepancy between -d
and -D.
opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
requested region lies beyond it.
* bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
looking for 32-bit insns.
* mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
data.
* sh-dis.c (print_insn_sh): Likewise.
* tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
blocks of instructions.
* vax-dis.c (print_insn_vax): Check that the requested address
does not clash with the stop_vma.
tests * gas/arm/backslash-at.s: Add extra .byte directives so that the
foo symbol does not appear to point half way through an
instruction.
* gas/arm/backslash-at.d: Update expected disassembly.
* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand
with the value of either a 0 or 1. It also defines an extended mnemonic
with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1".
I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the
problem is, optional operands that are ommitted always default to the
value 0, which is wrong in this case. I have added support for allowing
non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE
that specifies that the default operand value to be used is stored in the
SHIFT field of the operand field immediately following this one.
This fixes the rfebb issue. I also fixed the mftb and mfcr instructions
so they use the same mechanism. This allows us to flag invalid uses of
mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd].
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New.
(ppc_optional_operand_value): New inline function.
opcodes/
* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
* ppc-opc.c (FXM4): Add non-zero optional value.
(TBR): Likewise.
(SXL): Likewise.
(insert_fxm): Handle new default operand value.
(extract_fxm): Likewise.
(insert_tbr): Likewise.
(extract_tbr): Likewise.
gas/
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
gas/testsuite/
* gas/ppc/power8.d: Fixup rfebb test results.
* gas/ppc/a2.s: Fix invalid mfcr test.
* gas/ppc/a2.d: Likewise.
In the commit that added PowerPC Pair Singles, Ben accidentally removed
a comment and re-added an unused MTMSRD_L macro Alan had recently deleted.
This was probably just an oversite when he was refreshing his patch to
trunk.
opcodes/
* ppc-opc.c: Add comment accidentally removed by old commit.
(MTMSRD_L): Delete.
This commit adds a new extended menmonic for "sync 0" (same as "sync").
The ISA documentation doesn't explicitly mention hwsync as an extended
mnemonic (yet), but it does mention "heavyweight sync" and "hwsync" as
the operation that gets performed when the sync's L field is 0.
This is only enabled for POWER4 and later.
opcodes/
* ppc-opc.c: (powerpc_opcodes) <hwsync>: New extended mnemonic.
gas/testsuite/
* gas/ppc/a2.d: Fixup test case due to new extended mnemonic.
* gas/ppc/power4.s <hwsync, lwsync, ptesync, sync>: Add tests.
* gas/ppc/power4.d: Likewise.
The ARMv8.1 architecture introduced the Privileged Access Never extension. This
adds a processor state field PSTATE.PAN which can be accessed using the MRS/MSR
instructions.
This patch adds support for the PAN architecture feature and processor state
field to libopcode.
include/opcode
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_PAN): New.
(aarch64_sys_reg_supported_p): Declare.
(aarch64_pstatefield_supported_p): Declare.
opcodes/
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (F_ARCHEXT): New.
(aarch64_sys_regs): Add "pan".
(aarch64_sys_reg_supported_p): New.
(aarch64_pstatefields): Add "pan".
(aarch64_pstatefield_supported_p): New.
As pointed out before, the documentation mandates the rounding mode to
follow the GPR, so disassembler should produce output accordingly.
gas/testsuite/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512f.s: Adjust operand order for Intel syntax
vcvt{,u}si2ss.
* gas/i386/x86-64-avx512f.s: Adjust operand order for Intel
syntax vcvt{,u}si2s{d,s}.
opcodes/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* i386-dis.c (print_insn): Swap rounding mode specifier and
general purpose register in Intel mode.
As pointed out before, the documentation mandates the rounding mode to
follow the GPR, so gas should accept such input. As the brojen code got
released already we sadly will need to continue to also accept the
badly ordered operands.
gas/testsuite/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512f-intel.d: Adjust expectations on operand order.
* gas/i386/evex-lig256-intel.d: Likewise.
* gas/i386/evex-lig512-intel.d: Likewise.
* gas/i386/x86-64-avx512f-intel.d: Likewise.
* gas/i386/x86-64-evex-lig256-intel.d: Likewise.
* gas/i386/x86-64-evex-lig512-intel.d: Likewise.
opcodes/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl: New IntelSyntax entries for vcvt{,u}si2s{d,s}.
* i386-tbl.h: Regenerate.
AMD64 spec and Intel64 spec differ in direct unconditional branches in
64-bit mode. AMD64 supports direct unconditional branches with 16-bit
offset via the data size prefix, which truncates RIP to 16 bits, while
the data size prefix is ignored by Intel64.
This patch adds -mamd64/-mintel64 option to x86-64 assembler and
-Mamd64/-Mintel64 option to x86-64 disassembler. The most permissive
ISA, which is AMD64, is the default.
GDB can add an option, similar to
(gdb) help set disassembly-flavor
Set the disassembly flavor.
The valid values are "att" and "intel", and the default value is "att".
to select which ISA to disassemble.
binutils/
PR binutis/18386
* doc/binutils.texi: Document -Mamd64 and -Mintel64.
gas/
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
gas/testsuite/
PR binutis/18386
* gas/i386/i386.exp: Run x86-64-branch-2 and x86-64-branch-3.
* gas/i386/x86-64-branch.d: Also pass -Mintel64 to objdump.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
* gas/i386/x86-64-branch-2.d: New file.
* gas/i386/x86-64-branch-2.s: Likewise.
* gas/i386/x86-64-branch-3.l: Likewise.
* gas/i386/x86-64-branch-3.s: Likewise.
ld/testsuite/
PR binutis/18386
* ld-x86-64/tlsgdesc.dd: Also pass -Mintel64 to objdump.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/x86-64.exp (x86_64tests): Also pass -Mintel64 to
objdump for tlspic.dd and tlsgdesc.dd.
opcodes/
PR binutis/18386
* i386-dis.c: Add comments for '@'.
(x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
(enum x86_64_isa): New.
(isa64): Likewise.
(print_i386_disassembler_options): Add amd64 and intel64.
(print_insn): Handle amd64 and intel64.
(putop): Handle '@'.
(OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
* i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
* i386-opc.h (AMD64): New.
(CpuIntel64): Likewise.
(i386_cpu_flags): Add cpuamd64 and cpuintel64.
* i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
Mark direct call/jmp without Disp16|Disp32 as Intel64.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Remove the wait instructions for server processors, since they were never
implemented. Also add the extra operands added to the tlbie and slbia
instructions with ISA 2.06 and ISA 2.05 respectively.
binutils/
* MAINTAINERS: Add myself as PPC maintainer.
opcodes/
* ppc-opc.c (IH) New define.
(powerpc_opcodes) <wait>: Do not enable for POWER7.
<tlbie>: Add RS operand for POWER7.
<slbia>: Add IH operand for POWER6.
gas/testsuite/
* gas/ppc/power4.d: Add a slbia test.
* gas/ppc/power4.s: Likewise.
* gas/ppc/power6.d: Add slbia and tlbie tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d: Remove wait tests. Add a tlbie test.
* gas/ppc/power7.s: Likewise.
Disp16 and Disp32 aren't supported by direct branches in 64-bit mode.
This patch removes them from 64-bit direct branches.
* opcodes/i386-opc.tbl (call): Remove Disp16|Disp32 from 64-bit
direct branch.
(jmp): Likewise.
* i386-tbl.h: Regenerated.
Thomas Preud'homme
H.J. Lu
Anton Kolesov
Richard Sandiford
Andrew Jenner
Maciej W. Rozycki
Graham Markall
Claudiu Zissulescu
Jose E. Marchesi
jamesbowman
Jan Beulich
Yao Qi
Trevor Saunders
Peter Bergner
Nick Clifton
Andrew Burgess
Andreas Krebbel
Denis Chertykov
Alan Modra
Matthew Wahab
Matthew Fortune
Alexander Fomin
Szabolcs Nagy
Jiong Wang
Jan Kratochvil
Renlin Li
Michael McConville
Andreas Schwab
Yoshinori Sato
DJ Delorie
Andre Vieira
Tristan Gingold
Robert Suchanek
Vinay Kumar
Dominik Vogt
Tom Rix
Anton Blanchard
Jan Stancek
Andre Vieira
Simon Dardis
Amit Pawar
Alessandro Marzocchi
Sandra Loosemore