This commit restructures the selection of the default cpu/mach so that
the choice is made from md_begin (if the user has not provided a command
line choice). This will reduce the amount of change needed in a later
patch.
At the request of Synopsys, the default architecture changes to ARC700
from this commit, previously the default was a non-existent
super-architecture that contained all instructions from all arc
variants. There's some clean up associated with removing the default
merged architecture, and a small test fix now that the default is
ARC700.
binutils/ChangeLog:
* testsuite/binutils-all/objdump.exp (cpus_expected): Add ARC700
to the architecture list.
gas/ChangeLog:
* config/tc-arc.c (arc_target): Delay initialisation until
arc_select_cpu.
(arc_target_name): Likewise.
(arc_features): Likewise.
(arc_mach_type): Likewise.
(cpu_types): Remove "all" entry.
(arc_select_cpu): New function, most of the content is from...
(md_parse_option): ... here. Call new arc_select_cpu.
(md_begin): Call arc_select_cpu if needed, default is now arc700.
include/ChangeLog:
* opcode/arc.h (ARC_OPCODE_BASE): Delete.
opcodes/ChangeLog:
* arc-opc.c (BASE): Delete.
PR target/19721
opcodes * aarch64-tbl.h (aarch64_opcode_table): Fix type of second operand
of MOV insn that aliases an ORR insn.
gas * testsuite/gas/aarch64/pr19721.s: New test source file.
* testsuite/gas/aarch64/pr19721.d: New test driver file.
gas/
* config/tc-arm.c (N_S_32): New.
(N_F_16_32): Likewise.
(N_SUF_32): Support N_F16.
(N_IF_32): Likewise.
(neon_dyadic_misc): Likewise.
(do_neon_cmp): Likewise.
(do_neon_cmp_inv): Likewise.
(do_neon_mul): Likewise.
(do_neon_fcmp_absolute): Likewise.
(do_neon_step): Likewise.
(do_neon_abs_neg): Likewise.
(CVT_FLAVOR_VAR): Likewise.
(do_neon_cvt_1): Likewise.
(do_neon_recip_est): Likewise.
(do_vmaxnm): Likewise.
(do_vrint_1): Likewise.
(neon_check_type): Check architecture support for FP16 extension.
(insns): Update comments.
* testsuite/gas/arm/armv8-2-fp16-simd.s: New test source.
* testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for
arm mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for
thumb mode.
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection
error file.
opcode/
* arm-dis.c (neon_opcodes): Support new FP16 instructions.
opcodes/
2016-02-24 Renlin Li <renlin.li@arm.com>
* arm-dis.c (print_insn_coprocessor): Check co-processor number for
cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2.
gas/
2016-02-24 Renlin Li <renlin.li@arm.com>
* testsuite/gas/arm/copro.s: Use coprocessor other than 10, 11.
* testsuite/gas/arm/copro.d: Update.
PR target/19561
opcdoe * msp430-dis.c (print_insn_msp430): Add a special case for
decoding an RRC instruction with the ZC bit set in the extension
word.
include * opcode/msp430.h (IGNORE_CARRY_BIT): New define.
(RRUX): Synthesise using case 2 rather than 7.
gas * config/tc-msp430.c (msp430_operands): Remove case 7. Use case 2
to handle encoding of RRUX instruction.
* testsuite/gas/msp430/msp430x.s: Add more tests of the extended
shift instructions.
* testsuite/gas/msp430/msp430x.d: Update expected disassembly.
The calculation of the shift amount, used to insert fields into the
instruction buffer, is not correct when the following conditions are all
true:
- CGEN_INT_INSN_P is defined, and true.
- CGEN_INSN_LSB0_P is true
- Total instruction length is greater than the length of a single
instruction word (the instruction is made of multiple words)
- The word offset is non-zero (the field is outside the first word)
When the above conditions are all true, the calculated shift fails to
take account of the total instruction length.
After this commit the calculation of the shift amount is split into two
parts, first we calculate the shift required to get to BIT0 of the word
in which the field lives, then we calculate the shift required to place
the field within the instruction word.
The change in this commit only effects the CGEN_INT_INSN_P defined true
case, but changes the code for both CGEN_INSN_LSB0_P true, and false.
In the case of CGEN_INSN_LSB0_P being false, the code used to say:
shift = total_length - (word_offset + start + length);
Now it says:
shift_to_word = total_length - (word_offset + word_length);
shift_within_word = word_length - start - length;
shift = shift_to_word + shift_within_word;
From which we can see that in all cases the computed shift value should
be unchanged.
In the case of CGEN_INSN_LSB0_P being true, the code used to say:
shift = (word_offset + start + 1) - length;
Now it says:
shift_to_word = total_length - (word_offset + word_length);
shift_within_word = start + 1 - length;
shift = shift_to_word + shift_within_word;
In the case where 'total_length == word_length' AND 'word_offset ==
0' (which indicates an instruction of a single word), we see that the
computed shift value will be unchanged. However, when the total_length
and word_length are different, and the word_offset is non-zero then the
computed shift value will be different (and correct).
opcodes/ChangeLog:
* cgen-ibld.in (insert_normal): Rework calculation of shift.
* epiphany-ibld.c: Regenerate.
* fr30-ibld.c: Regenerate.
* frv-ibld.c: Regenerate.
* ip2k-ibld.c: Regenerate.
* iq2000-ibld.c: Regenerate.
* lm32-ibld.c: Regenerate.
* m32c-ibld.c: Regenerate.
* m32r-ibld.c: Regenerate.
* mep-ibld.c: Regenerate.
* mt-ibld.c: Regenerate.
* or1k-ibld.c: Regenerate.
* xc16x-ibld.c: Regenerate.
* xstormy16-ibld.c: Regenerate.
Always set the bytes_per_line field (of struct disassemble_info) to the
same constant value, this is inline with the advice contained within
include/dis-asm.h.
Setting this field to a constant value will cause the disassembler
output to be better aligned.
cpu/ChangeLog:
* epiphany.opc (epiphany_print_insn): Set info->bytes_per_line to
a constant to better align disassembler output.
opcodes/ChangeLog:
* epiphany-dis.c: Regenerated from latest cpu files.
gas/ChangeLog:
* testsuite/gas/epiphany/sample.d: Update expected output.
In the instruction to write to the ARMv8.2 PSTATE field UAO,
MSR UAO, #<imm>, the immediate should be either 0 or 1 but GAS accepts
any unsigned 4-bit integer.
This patch implements the constraint on the immediate, generating an
error if the immediate operand is invalid, and adds tests for the
illegal forms.
opcodes/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Check validity
of MSR UAO immediate operand.
gas/
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/armv8_2-a-illegal.d: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.l: New.
* testsuite/gas/aarch64/armv8_2-a-illegal.s: New.
Change-Id: Ibdec4967c00b1ef3be9dbc43d23b2c70d1a0b28c
The POOL48A major opcode was defined in early revisions of the 64-bit
microMIPS ISA, has never been implemented, and was removed before the
64-bit microMIPS ISA specification[1] has been finalized.
This complements commit a6c7053929 ("MIPS/opcodes: Remove microMIPS
48-bit LI instruction").
References:
[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of
Major Opcode Field", p. 578
gas/
* config/tc-mips.c (micromips_insn_length): Remove the mention
of 48-bit microMIPS instructions.
gdb/
* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
instruction support.
(micromips_next_pc): Likewise.
(micromips_scan_prologue): Likewise.
(micromips_deal_with_atomic_sequence): Likewise.
(micromips_stack_frame_destroyed_p): Likewise.
(mips_breakpoint_from_pc): Likewise.
opcodes/
* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
instruction support.
* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
instructions that can support stack pointer operations.
* rl78-decode.c: Regenerate.
* rl78-dis.c: Fix display of stack pointer in MOVW based
instructions.
* testsuite/gas/rl78/sp-relative-movw.s: New test.
* testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly.
* testsuite/gas/rl78/rl78.exp: Run the new test.
Some of the RAS system registers added to binutils as part of the ARMv8.2
support are missing the feature checks to warn when they aren't
supported by the target.
This patch adds the missing feature checks with a test to check that
the correct warnings are given for all the ARMv8.2 system registers.
gas/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/aarch64/illegal-sysreg-2.l: New.
* testsuite/gas/aarch64/illegal-sysreg-2.d: New.
opcodes/
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals
testing for RAS support. Add checks for erxfr_el1, erxctlr_el1,
erxtatus_el1 and erxaddr_el1.
Change-Id: I66b590ea49c1eb6b0e5c93e0dc2bc9c4e79a52fe
The ARMv8.2 architecture includes the RAS extension which adds an
instruction, ESB, and a number of coprocessor registers. This patch adds
the instruction to binutils, making it available when -march=armv8.2-a
is selected. It also adds tests for the instruction and for the
coprocessor registers.
gas/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-arm.c (arm_ext_v8_2): New.
(insns): Add "esb".
* testsuite/gas/arm/armv8_2-a.d: New.
* testsuite/gas/arm/armv8_2-a.s: New.
opcodes/
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
* arm-dis.c (arm_opcodes): Add "esb".
(thumb_opcodes): Likewise.
Change-Id: I67f3d70789db78d1c66a56c4994675f99ac15e34
For ISA_B/C only the combination #,d(An) is allowed in addition to the
ISA_A combinations for move.b and move.w (and pc-relative is never
allowed as destination).
opcodes/
PR gas/13050
* m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in
addition to ISA_A.
gas/
PR gas/13050
* testsuite/gas/m68k/all.exp: Add tests p13050-1 and p13050-2.
* testsuite/gas/m68k/p13050-1.s: New file.
* testsuite/gas/m68k/p13050-2.d: New file.
* testsuite/gas/m68k/p13050-2.s: New file.
In this GCC commit:
https://gcc.gnu.org/ml/gcc-patches/2015-12/msg00735.html
GCC started emitting dmb instructions with no operands. The intention
was that dmb with no operands should be an alias for 'dmb 0'.
The following patch extends the arc opcodes library to support dmb with
no operands.
opcodes/ChangeLog:
* arc-tbl.h (dmb): Add a no operand version of dmb.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards
to merging with ARMv8-M Baseline.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch
value.
gas/
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
gas/testsuite/
* gas/arm/archv8m-base.d: New file.
* gas/arm/attr-march-armv8m.base.d: Likewise.
* gas/arm/armv8m.base-idiv.d: Likewise.
* gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_BASE): Declare.
include/opcode/
* arm.h (ARM_EXT2_V6T2_V8M): New extension bit.
(ARM_AEXT2_V8A): New architecture extension bitfield.
(ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_AEXT_V8M_BASE): New architecture extension bitfield.
(ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M.
(ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield.
(ARM_ARCH_V6KT2): Likewise.
(ARM_ARCH_V6ZT2): Likewise.
(ARM_ARCH_V6KZT2): Likewise.
(ARM_ARCH_V7): Likewise.
(ARM_ARCH_V7A): Likewise.
(ARM_ARCH_V7VE): Likewise.
(ARM_ARCH_V7R): Likewise.
(ARM_ARCH_V7M): Likewise.
(ARM_ARCH_V7EM): Likewise.
(ARM_ARCH_V8A): Likewise.
(ARM_ARCH_V8M_BASE): New architecture bitfield.
(ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M.
(ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield and reindent.
(ARM_ARCH_V7A_MP_SEC): Likewise.
(ARM_ARCH_V7R_IDIV): Likewise.
(ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex,
ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by
ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust v4t_plus_v6_m and comb array to account
for new TAG_CPU_ARCH_V4T_PLUS_V6_M value. Deal with NULL values in
comb array.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Mainline Tag_CPU_arch
value.
(arm_attr_tag_THUMB_ISA_use): Add ARMv8-M Mainline Tag_THUMB_ISA_use
value.
gas/
* config/tc-arm.c (arm_ext_m): Include ARMv8-M.
(arm_ext_v8m): New feature for ARMv8-M.
(arm_ext_atomics): New feature for ARMv8 atomics.
(do_tt): New encoding function for TT* instructions.
(insns): Add new entries for ARMv8-M specific instructions and
reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
(arm_archs): Define armv8-m.main architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
clarify the ordering rule.
(aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
Tag_CPU_arch values for ARMv7e-M detection. Add logic to keep setting
Tag_CPU_arch to ARMv8-A for -march=all. Also set Tag_CPU_arch_profile
to 'A' if extension bit for atomic instructions is set, unless it is
ARMv8-M. Set Tag_THUMB_ISA_use to 3 for ARMv8-M. Set Tag_DIV_use to 0
for ARMv8-M Mainline.
gas/testsuite/
* gas/arm/archv8m.s: New file.
* gas/arm/archv8m-main.d: Likewise.
* gas/arm/attr-march-armv8m.main.d: Likewise.
* gas/arm/any-armv8m.s: Likewise.
* gas/arm/any-armv8m.d: Likewise.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_MAIN): Declare.
(MAX_TAG_CPU_ARCH): Define to TAG_CPU_ARCH_V8M_MAIN.
(TAG_CPU_ARCH_V4T_PLUS_V6_M): Define to unused value 15.
include/opcode/
* arm.h (ARM_EXT2_ATOMICS): New extension bit.
(ARM_EXT2_V8M): Likewise.
(ARM_EXT_V8): Adjust comment with regards to atomics and remove
mention of legacy use for that bit.
(ARM_AEXT2_V8_1A): New architecture extension bitfield.
(ARM_AEXT2_V8_2A): Likewise.
(ARM_AEXT_V8M_MAIN): Likewise.
(ARM_AEXT2_V8M): Likewise.
(ARM_ARCH_V8A): Use ARM_EXT2_ATOMICS for features in second bitfield.
(ARM_ARCH_V8_1A): Likewise with ARM_AEXT2_V8_1A.
(ARM_ARCH_V8_2A): Likewise with ARM_AEXT2_V8_2A.
(ARM_ARCH_V8M_MAIN): New architecture feature bitfield.
(ARM_ARCH_V8A_FP): Use ARM_EXT2_ATOMICS for features in second bitfield
and reindent.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
(ARM_ARCH_V8_1A_FP): Use ARM_AEXT2_V8_1A to set second bitfield of
feature bits.
(ARM_ARCH_V8_1A_SIMD): Likewise.
(ARM_ARCH_V8_1A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard lda, ldab, ldaex, ldaexb, ldaexh, stl,
stlb, stlh, stlex, stlexb and stlexh by ARM_EXT2_ATOMICS instead of
ARM_EXT_V8.
(thumb32_opcodes): Add entries for wide ARMv8-M instructions.
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch extends
instructions in the group Adv.SIMD Scalar Shift By Immediate to support
FP16, making this support available when +simd+fp16 is enabled.
The extended instructions are: SCVTF, FCVTZS, UCVTF and FCVTZU.
The general form for these instructions is
<OP> <Hd>, <Hs>, #<imm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16: Add tests for Adv.SIMD scalar shift
by immediate instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SSHIFT_H): New.
(aarch64_opcode_table): Add fp16 versions of scvtf, fcvtzs, ucvtf
and fcvtzu to the Adv.SIMD scalar shift by immediate group.
Change-Id: I40506496f52dd96909e7344f243b38a1870df7ff
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch extends
instructions in the group Adv.SIMD Shift By Immediate to support FP16,
making this support available when +simd+fp16 is enabled.
The new instructions legal make some uses of the 4h vector type that had
been invalid. This patch adjusts a test that checks for these uses.
The extended instructions are: SCVTF, FCVTZS, UCVTF and FCVTZU.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>, #<imm>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD across lanes
instructions.
* gas/aarch64/illegal.d: Update expected output.
* gas/aarch64/illegal.s: Replace tests for illegal use of 'h'
specifier.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_VSHIFT_H): New.
(aarch64_opcode_table): Add fp16 versions of scvtf, fcvtzs, ucvtf
and fcvtzu to the Adv.SIMD shift by immediate group.
Change-Id: I3480f63883d54db46562573185da6982f2365ee8
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Adv.SIMD Scalar Pairwise, making them
available when +simd+fp16 is enabled.
The instructions added are: FMAXNMP, FADDP, FMAXP, FMINNMP and FMINP
The general form for these instructions is
<OP> <Hd>, <V>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD Scalar
Pairwise instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SISD_PAIR_H): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnmp, faddp,
fmaxp, fminnmp, fminp to the Adv.SIMD scalar pairwise group.
Change-Id: I19937ede3441b66dd0f940269ece895b17d3c345
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. The FP16 additions to the
scalar pairwise group introduce a new vector type, 2H. This patch adds
support for this vector type to binutils.
The patch adds a new operand qualifier to the enum
aarch64.h:aarch64_opnd_qualifier. This interferes with the calculation
used by aarch64-dis.c:get_vreg_qualifier_from_value, called when
decoding an instruction. Since the new vector type is only used in FP16
scalar pairwise instructions which do not require the function, this
patch adjusts the function to ignore the new qualifier.
gas/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_neon_type_for_operand): Adjust to
take into account new vector type 2H.
(vectype_to_qualifier): Likewise.
include/opcode/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (enum aarch64_opnd_qualifier): Add
AARCH64_OPND_QLF_V_2H.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.coM>
* aarch64-dis.c (get_vreg_qualifier_from_value): Update comment
and adjust calculation to ignore qualifier for type 2H.
* aarch64-opc.c (aarch64_opnd_qualifier): Add "2H".
Change-Id: Idf9a3694732962c80fde04f08c7304de9164f126
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds an FP16
instruction to the group Adv.SIMD Modified Immediate, making it
available when +simd+fp16 is enabled.
The instruction added is: FMOV.
The form of this instructions is
<OP> <Hd>, #<imm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD modified immediate
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SIMD_IMM_H): New.
(aarch64_opcode_table): Add fp16 version of fmov to the Adv.SIMD
modified immediate group.
Change-Id: Ic66af44c494e6a53fb1cf01c372cdc62d12643e2
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Adv.SIMD Across Lanes, making them available
when +simd+fp16 is enabled.
The instructions added are: FMAXNMV, FMAXV, FMINNMV and FMINV.
The general form for these instructions is
<OP> <Hd>, <V>.<T>
where T is 4h or 8h.
The new instructions valid make uses of the 8H and 4H that were
previously illegal. The patch adjusts a test for illegal uses of vector
types to take this into account.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for Adv.SIMD across lanes
instructions.
* gas/aarch64/illegal.d: Update expected output.
* gas/aarch64/illegal.s: Replace test for illegal use of 'h'
specifier.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_XLANES_FP_H): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnmv, fmaxv,
fminnmv, fminv to the Adv.SIMD across lanes group.
Change-Id: Ib9a47e867f55e0272c2446eb7e16837503d2f94c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Indexed Element, making them available
when +simd+fp16 is enabled.
The instructions added are: FMLA, FMLS, FMUL and FMULX.
The general form for these instructions is
<OP> <Hd>, <Hs>, <V>.h[<idx>]
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar indexed element
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarch64_opcode_table): Add fp16 versions of fmla,
fmls, fmul and fmulx to the scalar indexed element group.
Change-Id: I6a4ee20a9ae1019b89d0fd05da55222f267c5627
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Indexed Element, making them available
when +simd+fp16 is enabled.
The instructions added are: FMLA, FMLS, FMUL and FMULX.
The general form for these instructions is
<OP> <V>.<T>, <V>.<T>, <V>.h[<idx>]
where T is 4h or 8h
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for vector indexed element
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_ELEMENT_FP_H): New.
(aarch64_opcode_table): Add fp16 versions of fmla, fmls, fmul and
fmulx to the vector indexed element group.
Change-Id: Ib70cd4eaa6ea2938f84ac41f31d72644dbb0ceb4
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Two Register Misc, making them
available when +simd+fp16 is enabled.
The instructions added are: FCMGT, FCMGE, FCMEQ, FCMLE, FCMLT, FCVTNS,
FCVTNU, FCVTPS, FCVTPU, FCVTMS, FCVTMU, FCVTZS, FCVTZU, FCVTAS, FCVTAU,
SCVTF, UCVTF, FRECPE, FRSQRTE and FRECPX.
The general form for these instructions is
<OP> <Hd>, <Hs>
or
<OP> <Hd>, <Hs>, #0.0
Tested the series for aarch64-none-linux-gnu with cross-compiled
check-binutils and check-gas.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar two register misc.
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_SISD_FCMP_H_0): new.
(QL_S_2SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of fcvtns, fcvtms,
fcvtas, scvtf, fcmgt, fcmeq, fcmlt, fcvtps, fcvtzs, frecpe,
frecpx, fcvtnu, fcvtmu, fcvtau, ucvtf, fcmge, fcmle, fcvtpu,
fcvtzu and frsqrte to the scalar two register misc. group.
Change-Id: I19b25baae33027ce1bade68cc8dc47a4321d045c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Two Register Misc, making them
available when +simd+fp16 is enabled.
The instructions added are: FCMGT, FCMGE, FCMEQ, FCMLE, FCMLT, FABS,
FNEG, FRINTN, FRINTA, FRINTP, FRINTM, FRINTX, FRINTZ, FRINTI, FCVTNS,
FCVTNU, FCVTPS, FCVTPU, FCVTMS, FCVTMU, FCVTZS, FCVTZU, FCVTAS, FCVTAU,
SCVTF, UCVTF, FRECPE, FRSQRTE and FSQRT.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for vector two register misc.
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_V2SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of frintn, frintm,
fcvtns, fcvtms, fcvtas, scvtf, fcmgt, fcmeq, fcmlt, fabs, frintp,
frintz, fcvtps, fcvtzs, frecpe, frinta, frintx, fcvtnu, fcvtmu,
fcvtau, ucvtf, fcmge, fcmle, fneg, frinti, fcvtpu, fcvtzu, frsqrte
and fsqrt to the vector register misc. group.
Change-Id: I0267511a7f7ea14247504d29fe4752e84c9af9ad
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Scalar Three Register Same, making them
available when +simd+fp16 is enabled.
The instructions added are: FABD, FMULX, FCMEQ, FCMGE, FCMGT, FACGE,
FACGT, FRECPS and FRSQRTS.
The general form for these instructions is
<OP> <Hd>, <Hs>, <Hm>
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: Update expected output.
* gas/aarch64/advsimd-fp16.s: Add tests for scalar three register same
instructions.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarch64_opcode_table): Add fp16 versions of
fmulx, fcmeq, frecps, frsqrts, fcmge, facge, fabd, fcmgt and
facgt to the scalar three same group.
Change-Id: I155eb8d7c1e9a7c89d691d7e4aae83be51ff1238
ARMv8.2 adds 16-bit floating point operations as an optional extension
to floating point and Adv.SIMD support. This patch adds FP16
instructions to the group Vector Three Register Same, making them
available when +simd+fp16 is enabled.
The instructions added are: FMAXNM, FMAXNMP, FNMINNM, FMINNMP, FMLA,
FMLS, FADD, FADDP, FSUB, FABD, FMULX, FMUL, FCMEQ, FCMGE, FCMGT, FACGE,
FACGT, FMAX, FMAXP, FMIN, FMINP, FRECPS, FDIV and FRSQRTS.
The general form for these instructions is
<OP> <Vd>.<T>, <Vs>.<T>, <Vm>.<T>
where T is 4h or 8h.
gas/testsuite/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/advsimd-fp16.d: New.
* gas/aarch64/advsimd-fp16.s: New.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_V3SAMEH): New.
(aarch64_opcode_table): Add fp16 versions of fmaxnm, fmla, fadd,
fmulx, fcmeq, fmax, frecps, fminnm, fmls, fsub, fmin, frsqrts,
fmaxnmp, faddp, fmul, fcmge, facge, fmaxp, fdiv, fminnmp, fabd,
fcmgt, facgt and fminp to the vector three same group.
Change-Id: I3f1c5fe82ca73f7a17fe5329cf2b0de03c94328c
ARMv8.2 adds 16-bit floating point operations as an optional extension
to floating point and Adv.SIMD support. This patch set adds the 16-bit
Adv.SIMD vector and scalar instructions to binutils, making them
available when both +simd and +fp16 architecture extensions are enabled.
The series also adds support for a new vector type, 2H, used by the FP16
scalar pairwise instructions.
The patches in this series:
- Add a FP16 Adv.SIMD feature macro for use by the encoding/decoding
routines.
- Add FP16 instructions in the group Vector Three Register Same.
- Add FP16 instructions in the group Scalar Three Register Same.
- Add FP16 instructions in the group Vector Two Register Misc.
- Add FP16 instructions in the group Scalar Two Register Misc.
- Add FP16 instructions in the group Vector Indexed Element.
- Add FP16 instructions in the group Scalar Indexed Element.
- Add FP16 instructions in the group Adv.SIMD Across Lanes.
- Add FP16 instructions in the group Adv.SIMD Modified Immediate.
- Rework some code for handling vector types to weaken its assumptions
about available vector-types.
- Add support for the 2H vector type.
- Add FP16 instructions in the group Adv.SIMD Scalar Pairwise.
- Add FP16 instructions in the group Adv.SIMD Shift By Immediate.
- Add a FP16 instructions in the group Adv.SIMD Scalar Shift By
Immediate.
This patch adds the feature macro SIMD_F16 to the AArch64
encoding/decoding routines. It is used to decide when the new
instructions are available to the assembler and is true when both +simd
and +fp16 are selected.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-tbl.h (aarch64_feature_simd_f16): New.
(SIMD_F16): New.
Change-Id: Iee5a37928418f15e51dfaa927b24cafef7295e8f
A mistake with rebasing the ARMv8.2 AT instruction patch left this part
+ /* AT S1E1RP, AT S1E1WP. Values are from aarch64_sys_regs_at. */
+ if ((reg->value == CPENS (0, C7, C9, 0)
+ || reg->value == CPENS (0, C7, C9, 1))
+ && !AARCH64_CPU_HAS_FEATURE (features, AARCH64_FEATURE_V8_2))
+ return FALSE;
in aarch64_pstatefield_supported_p rather than in
aarch64_sys_ins_reg_supported_p, where it was supposed to be.
The patch adding support for id_aa64mmfr2_el1, also had the effect of
removing a conditional branch in aarch64_sys_reg_supported_p.
The effect of both of these is to suppress an error if some ARMv8.2
system registers are used with the wrong -march settings.
This patch fixes these mistakes.
opcodes/
2015-12-14 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg_supported_p): Add mistakenly
removed statement.
(aarch64_pstatefield_supported_p): Move feature checks for AT
registers ..
(aarch64_sys_ins_reg_supported_p): .. to here.
Change-Id: I48783d118eaaf0f3312e8b08a8340ef7af4e36a4
This is a workaround for a gcc bug.
PR 19359
* ppc-opc.c (insert_fxm): Remove "ignored" from error message.
(powerpc_opcodes): Remove single-operand mfcr.
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds the instruction to
binutils as a HINT alias that takes an operand.
A new operand type, AARCH64_OPND_BARRIER_PSB, is added to represent the
operand to PSB. A parser for the operand type is added to the assembler
and a printer to the disassembler. The operand name "csync" is added to
the list of HINT options with HINT number #17. Encoding and decoding of
the operand is handled by the ins_hint/ext_hint functions added in the
preceding patches.
gas/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
(parse_barrier_psb): New.
(parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
(md_begin): Set up aarch64_hint_opt_hsh.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: Enable the statistical profiling
extension. Update the expected output.
* gas/aarch64/system-2.s: Add tests for PSB CSYNC.
* gas/aarch64/system.d: Update the expected output.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_opnd): Add AARCH64_OPND_BARRIER_PSB.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (aarch64_hint_options): Add "csync".
(aarch64_print_operands): Handle AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_feature_stat_profile): New.
(STAT_PROFILE): New.
(aarch64_opcode_table): Add "psb".
(AARCH64_OPERANDS): Add "BARRIER_PSB".
Change-Id: I5ffb672d26a8b15b48785478d359350a9b70ca09
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. This patch adds support for aliases
of HINT which take an operand, adding a table to store operand names and
their matching hint number as well as encoding and decoding functions
for such operands. Parsing and printing the operands are deferred to any
support added for aliases with such operands.
include/opcode/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_hint_options): Declare.
(aarch64_opnd_info): Add field hint_option.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm.c (aarch64_ins_hint): New.
* aarch64-asm.h (aarch64_ins_hint): Declare.
* aarch64-dis.c (aarch64_ext_hint): New.
* aarch64-dis.h (aarch64_ext_hint): Declare.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (aarch64_hint_options): New.
* aarch64-tbl.h (AARCH64_OPERANDS): Fix typos.
Change-Id: I2205038fc1c47d3025d1f0bc2fbf405b5575b287
The Statistical Profile Extension adds the instruction PSB CSYNC as an
alias for the HINT #17 instruction. The HINT instruction currently has 8
aliases, which is the maximum number allowed. This patch raises to 16
the limit on the number of aliases an instruction can have.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-gen.c (find_alias_opcode): Set max_num_aliases to 16.
Change-Id: I131044bf6e0fe0940a9e7478d9bf52137748907d
The Statistical Profile extension included in the ARMv8.2 architecture
adds a number of system registers. This patch adds the registers to
binutils, making them available when the architecture extension
"+profile" is enabled.
opcodes/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_reg): Add pbmlimitr_el1, pmbptr_el1,
pmbsr_el1, pmbidr_el1, pmscr_el1, pmsicr_el1, pmsirr_el1,
pmsfcr_el1, pmsevfr_el1, pmslatfr_el1, pmsidr_el1, pmscr_el2 and
pmscr_el2.
(aarch64_sys_reg_supported_p): Add architecture feature tests for
the new registers.
gas/testsuite/
2015-12-11 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.s: Add tests for the statistical profiling
system registers.
* gas/aarch64/sysreg-2.d: Enable the statistical profiling
extension and update the expected output.
Change-Id: Ibf23ad34db7c33f0fcd30010b796748b38be6efb
ARMv8.2 adds new instructions AT S1E1RP and AT S1E1WP to Aarch64. This
patch adds support for the instructions, making them available when
-march=armv8.2-a is selected.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Update for new tests for AT S1E1RP and
AT S1E1WP.
* gas/aarch64/sysreg-2.s: Add tests for AT S1E1RP and AT S1E1WP.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs_at): Add "s1e1rp" and "s1e1wp".
(aarch64_sys_ins_reg_supported_p): Add ARMv8.2 system register
feature test for "s1e1rp" and "s1e1wp".
Change-Id: I09e1044b629ab0a34b03c423e8d4e71ff92daad4
ARMv8.2 adds the new system instruction DC CVAP. This patch adds support
for the instruction to binutils, enabled when -march=armv8.2-a is
selected.
gas/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (parse_sys_ins_reg): Add check of
architectural support for system register.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Add tests for dc instruction.
* gas/aarch64/sysreg-2.s: Add uses of dc instruction.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_sys_ins_reg_supported_p): Declare.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): Add "cvap".
(aarch64_sys_ins_reg_supported_p): New.
Change-Id: I3158b97d9bbee9644c2d0e2986db807412ef1053
ARMv8.2 adds the new system instruction DC CVAP. This patch series adds
support for this instruction to binutils, enabled when -march=armv8.2-a
is selected.
The AArch64 binutils record of some system registers uses a boolean
value to hold the single flag currently supported for them. To allow
these registers to be limited to specific architectures, the first patch
in this series replaces the boolean flag with a bitset and feature test.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_sys_ins_reg): Replace has_xt with flags.
(aarch64_sys_ins_reg_has_xt): Declare.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-dis.c (aarch64_ext_regrt_sysins): Replace use of has_xt
with aarch64_sys_ins_reg_has_xt.
(aarch64_ext_sysins_op): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Likewise.
(F_HASXT): New.
(aarch64_sys_regs_ic): Update for changes to aarch64_sys_ins_reg.
(aarch64_sys_regs_dc): Likewise.
(aarch64_sys_regs_at): Likewise.
(aarch64_sys_regs_tlbi): Likewise.
(aarch64_sys_ins_reg_has_xt): New.
Change-Id: I363637a6c3f54d7ffff953b3a0734e8139cae819
ARMv8.2 adds a new control bit PSTATE.UAO. This patch adds support for
this bit to binutils, following the same basic pattern as for
PSTATE.PAN. The new control bit is only available when -march=armv8.2-a
is specified.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/uao-directive.d: New.
* gas/aarch64/uao.d: New.
* gas/aarch64/uao.s: New.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "uao".
(aarch64_sys_reg_supported_p): Add comment. Add checks for "uao".
(aarch64_pstatefields): Add "uao".
(aarch64_pstatefield_supported_p): Add checks for "uao".
Change-Id: Id571628ac5227b78aaf1876e85d15d7b6c0a2896
The ARMv8.2 RAS extension adds a number of new registers. This patch
adds the registers and makes them available whenever the RAS extension
is enabled, as it is when -march=armv8.2-a is selected.
The new registers are:
erridr_el1, errselr_el1, erxfr_el1, erxctlr, erxaddr_el1,
erxmisc0_el1, erxmisc1_el1, vsesr_el2, disr_el1 and
vdisr_el2.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: Add tests for new registers.
* gas/aarch64/sysreg-2.s: Likewise. Also replace some spaces with
tabs.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "vsesr_el2", "erridr_el1",
"errselr_el1", "erxfr_el1", "erxctlr", "erxaddr_el1",
"erxmisc0_el1", "erxmisc1_el1", "disr_el1" and "vdisr_el2".
(aarch64_sys_reg_supported_p): Add architecture feature tests for
new registers.
Change-Id: I8a01a0f0ee7987f89eead32650f6afcc749b3c74
The ARMv8.2 RAS extension adds a new barrier instruction ESB as an alias
and the preferred form of HINT 16.
This patch adds an architectural feature flag for the RAS extension and
includes it in the features selected enabled by -march=armv8.2-a. It
also adds the ESB instruction, making it available whenever the RAS
feature is enabled.
Because ESB is the preferred form and because the target architecture
isn't available to the disassembler, HINT 16 will be disassembled as ESB
even when the target has no support for the RAS extension.
gas/testsuite/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/system-2.d: New.
* gas/aarch64/system-2.s: New.
* gas/aarch64/system.d: Adjust expected output for HINT 16.
include/opcode/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_RAS): New.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_RAS.
opcodes/
2015-12-10 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-tbl.h (aarch64_feature_ras): New.
(RAS): New.
(aarch64_opcode_table): Add "esb".
Change-Id: Id4713917da15cca3b977284f43febd1c9b3d9faf
The idea being to put instructions that have the same encoding adjacent
to each other.
* opcodes/ppc-opc.c (powerpc_opcodes): Sort power9 insns by
major opcode/xop.
ARMv8.2 adds 16-bit floating point operations as an optional
extension. This patch adjusts the utility function expand_fp_imm to
support 16-bit values.
The function is intended to convert an 8-bit immediate representing a
floating point value to a representation that can be passed to
fprintf. Because of the limited use of the results, the only change made
to the function is to treat a request for a 16-bit float as a request
for a 32-bit float.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (half_conv_t): New.
(expand_fp_imm): Replace is_dp flag with the parameter size to
specify the number of bytes for the required expansion. Treat
a 16-bit expansion like a 32-bit expansion. Add check for an
unsupported size request. Update comment.
(aarch64_print_operand): Update to support 16-bit floating point
values. Update for changes to expand_fp_imm.
Change-Id: I1ae3df3864be375d71925197ab03397ed1ad2d15
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the ARMv8 FP support. This patch set adds support for the 16-bit FP
instructions to binutils, enabling the instructions when both +fp and
+fp16 architecture extensions are enabled.
The patches in this series:
- Add a feature macro for use by the encoding/decoding mechanism.
- Adjust a utility function, used when disassembling, to support 16-bit
floating point values.
- Add the new scalar floating-point instructions.
This patch adds the feature macro FP_F16 to the AArch64 encoding/decoding
mechanism, enabling it when both +fp and +fp16 are selected.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-tbl.h (aarch64_feature_fp_f16): New.
(FP_F16): New.
Change-Id: Ie370e43e3d77a7d54b4416b4be901b363a37f3d5
This patch adds the alias REV64 <Rd>, <Rs> as an alias for REV <Rd>,
<Rs>. However, REV is still the preferred form for the instruction.
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: Add tests for REV.
* gas/aarch64/alias-2.s: Likewise.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarchr64_opcode_table): Update "rev", add
"rev64".
Change-Id: I331567c8d3618ba9fec1673c6e0b5977222dde61
ARMv8.2 adds two new instructions: BFC as an alias for BFM and REV64 as
an alias for REV. This patch set adds support for these to binutils,
enabled when the -march=armv8.2-a is given. It depends on the support
for an instruction being its preferred form which was added in an
earlier patch.
This patch adds the alias BFC <Rd>, #<imm>, #<width> as the preferred
form for BFM when the source is a zero register and the conditions for
using the BFI form are met (in other words, BFC is the preferred form
for BFI <Rd>, <Rs>, #<imm>, #<width> when the <Rs> is a zero register).
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: New.
* gas/aarch64/alias-2.s: New.
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_op): Add OP_BFC.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-asm.c (convert_bfc_to_bfm): New.
(convert_to_real): Add case for OP_BFC.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c: (convert_bfm_to_bfc): New.
(convert_to_alias): Add case for OP_BFC.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (operand_general_constraint_met_p): Weaken assert
to allow width operand in three-operand instructions.
* aarch64-tbl.h (QL_BF1): New.
(aarch64_feature_v8_2): New.
(ARMV8_2): New.
(aarch64_opcode_table): Add "bfc".
Change-Id: I6efe318b2538ba11f0caece7c6d70957441c872b
Although the AArch64 backend supports aliased instructions, the aliasing
forms are always preferred over the real instruction. This makes it
awkward to handle instructions which have aliases but which are their
own preferred form.
This patch includes the instruction being aliased in the list of
alternatives which is searched when considering which form to use.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c: Weaken assert.
* aarch64-gen.c: Include the instruction in the list of its
possible aliases.
Change-Id: I1f23eb25fccef76a64d3d732d58761bd25fad94e
ARMv8.2 adds a new system register id_aa64mmfr2_el1. This patch adds
support for the register to binutils, making it available when
-march=armv8.2-a is selected.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "id_aa64mmfr2_el1".
(aarch64_sys_reg_supported_p): Add ARMv8.2 system register
feature test.
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: New.
* gas/aarch64/sysreg-2.s: New.
Change-Id: I767f18a60e2bd70ce74c89f6abfe07afdc9e601f
The ARMv8.1 architecture includes the Virtualization Host Extensions
which add a number of system registers. This patch adds support for
these system registers, making them available when -march=armv8.1-a is
selected.
include/opcode/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_V8_1): New.
(AARCH64_ARCH_v8_1): Add AARCH64_FEATURE_V8_1.
opcodes/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add spsr_el12, elr_el12,
sctlr_el12, cpacr_el12, ttbr1_el2, ttbr0_el12, ttbr1_el12,
tcr_el12, afsr0_el12, afsr1_el12, esr_el12, far_el12, mair_el12,
amair_el12, vbar_el12, contextidr_el2, contextidr_el12,
cntkctl_el12, cntp_tval_el02, cntp_ctl_el02, cntp_cval_el02,
cntv_tval_el02, cntv_ctl_el02, cntv_cval_el02, cnthv_tval_el2,
cnthv_ctl_el2, cnthv_cval_el2.
(aarch64_sys_reg_supported_p): Update for the new system
registers.
gas/testsuite/
2015-11-20 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/virthostext-directive.d: New.
* gas/aarch64/virthostext.d: New.
* gas/aarch64/virthostext.s: New.
Change-Id: Iecb370591b1b6e9e00d81c8ccd9ae3b0f71794a2
The support for accessing the ARMv8.1 PSTATE field PAN allows
instructions of the form MSR PAN, #<imm> with <imm> any unsigned 4-bit
integer. However, the architecture specification requires that the
immediate is either 0 or 1.
This patch implements the constraint on the immediate, generating an
error if the immediate operand is invalid, and adds tests for the
illegal forms.
opcodes/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Check validity
of MSR PAN immediate operand.
gas/testsuite/
2015-11-19 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/pan-illegal.d: New.
* gas/aarch64/pan-illegal.l: New.
* gas/aarch64/pan.s: Add tests for invalid immediates.
Change-Id: Ibb3056c975eb792104da138d94594224f56a993e
opcode * rx.h (enum RX_Operand_Type): Add RX_Operand_Zero_Indirect.
opcodes * rx-decode.opc (rx_disp): If the displacement is zero, set the
type to RX_Operand_Zero_Indirect.
* rx-decode.c: Regenerate.
* rx-dis (print_insn): Handle RX_Operand_Zero_Indirect.
gas * config/rx-parse.y: Allow zero value for 5-bit displacements.
tests * gas/rx/mov.sm: Add tests for zero offset indirect moves.
* gas/rx/mov.d: Update expected output.
Nowadays aarch64_decode_insn is a public interface used by both
opcodes and gdb. However, its behaviour relies on a global variable
no_aliases, which isn't a good practise. On the other hand, In default,
no_aliases is zero, but in GDB, we do want no alias when decoding
instructions for prologue analysis (patches to be posted), so that we
can handle both instructions "add" and "mov" (an alias of "add") as
"add". The code in GDB can be simplified.
This patch adds a new argument in aarch64_decode_insn, and pass no_aliases
to it. In GDB side, always pass 1 to it.
include/opcode:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64.h (aarch64_decode_insn): Update declaration.
opcodes:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (aarch64_decode_insn): Add one argument
noaliases_p. Update comments. Pass noaliases_p rather than
no_aliases to aarch64_opcode_decode.
(print_insn_aarch64_word): Pass no_aliases to
aarch64_decode_insn.
gdb:
2015-10-28 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_software_single_step): Pass 1 to
aarch64_decode_insn.
PR binutils/19159
opcodes * rl78-decode.opc (MOV): Added offset to DE register in index
addressing mode.
* rl78-decode.c: Regenerate.
test * gas/rl78/pr19159.s: New test source file.
* gas/rl78/pr19159.d: New test case.
* gas/rl78/rl78.exp: Run the new test.
PR binutils/19158
opcodes * rl78-decode.opc: Add 's' print operator to instructions that
access system registers.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78_common): Decode all system
registers.
tests * gas/rl78/pr19158.s: New test source file.
* gas/rl78/pr19158.d: New test case.
* gas/rl78/rl78.exp: Run the new test.
PR binutils/19157
opcodes * rl78-decode.opc: Add 'a' print operator to mov instructions
using stack pointer plus index addressing.
* rl78-decode.c: Regenerate.
tests * gas/rl78: New directory.
* gas/rl78/rl78.exp: New test driver.
* gas/rl78/pr19157.s: New test source file.
* gas/rl78/pr19157.d: New test case.
opcodes/ChangeLog:
2015-10-14 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Fix comment.
* s390-opc.txt: Change instruction type for troo, trot, trto, and
trtt to RRF_U0RER since the second parameter does not need to be a
register pair.
gas/testsuite/ChangeLog:
2015-10-14 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* gas/s390/esa-g5.d: Use odd GPR for the second operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
'template' is used in include/opcode/aarch64.h as below,
typedef struct
{
const char *template;
uint32_t value;
int has_xt;
} aarch64_sys_ins_reg;
and it triggers compilation errors when GDB is built in C++ mode.
In file included from git/gdb/aarch64-tdep.c:62:0:
git/gdb/../include/opcode/aarch64.h:651:15: error: expected unqualified-id before 'template'
const char *template;
This patch is to rename field template to name.
gas/
* config/tc-aarch64.c (md_begin): Access field 'name' rather
than 'template'.
include/opcode/
* aarch64.h (aarch64_sys_ins_reg) <template>: Removed.
<name>: New field.
opcodes/
* aarch64-dis.c (aarch64_ext_sysins_op): Access field
'name' rather than 'template'.
* aarch64-opc.c (aarch64_print_operand): Likewise.
We want to use disas_aarch64_insn inside GDB to decode instructions, so
this patch exposes it and rename it to aarch64_decode_insn to follow
the conventions of other interfaces.
include/opcode:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64.h (aarch64_decode_insn): Declare it.
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove static. Change
argument insn type to aarch64_insn. Rename to ...
(aarch64_decode_insn): ... it.
(print_insn_aarch64_word): Caller updated.
I happen to see that argument pc is not used inside disas_aarch64_insn
at all. This patch is to remove it.
OK to apply?
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove argument PC.
(print_insn_aarch64_word): Caller updated.
gas * doc/c-s390.texi: Add documentation.
Add missing code markup.
* config/tc-s390.c (current_flags): New static variable.
(s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
(s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
Fix indentation.
(md_parse_option): Call s390_parse_cpu with the new signature.
(s390_machine): Likewise.
Keep track of current_flags.
Simplify code a bit.
undefine MAX_HISTORY at end of function.
(s390_machinemode): undefine MAX_HISTORY at end of function.
Update an error message.
tests * gas/s390/s390.exp: Add new tests.
* gas/s390/machine-parsing-1.s: New test file.
* gas/s390/machine-parsing-1.l: Likewise.
* gas/s390/machine-parsing-2.s: Likewise.
* gas/s390/machine-parsing-2.l: Likewise.
* gas/s390/machine-parsing-3.s: Likewise.
* gas/s390/machine-parsing-3.l: Likewise.
* gas/s390/machine-parsing-4.s: Likewise.
* gas/s390/machine-parsing-4.l: Likewise.
* gas/s390/machine-parsing-5.s: Likewise.
* gas/s390/machine-parsing-5.l: Likewise.
* gas/s390/machine-parsing-6.s: Likewise.
* gas/s390/machine-parsing-6.l: Likewise.
opcode * s390.h (S390_INSTR_FLAG_HTM): New flag.
(S390_INSTR_FLAG_VX): New flag.
(S390_INSTR_FLAG_FACILITY_MASK): New flag mask.
opcodes * s390-mkopc.c (main): Parse htm and vx flag.
* s390-opc.txt: Mark instructions from the hardware transactional
memory and vector facilities with the "htm"/"vx" flag.
This fixes the instruction format for 3 of the compare and branch
extended mnemonics. That way the extended mnemonics are actually
being found by objdump.
gas/testsuite/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* gas/s390/zarch-z10.d: Fix testcase for some of the compare and
branch extended mnemonics.
opcodes/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.txt: Fix instruction format of crj*, clrj*, and clgrj*.
This is cleanup only.
opcodes/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Remove unused (and broken) F_20 and FE_20 operand
types and adjust numbering accordingly. Fix some comments.
This makes objdump to be able to recognize some of the extended
mnemonics more often. It does not lead to wrong being generated.
opcodes/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Fix MASK_RIE_R0PI and MASK_RIE_R0PU.
gas/testsuite/ChangeLog:
2015-09-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* gas/s390/zarch-z10.d: Fix testcase for compare and branch
extended mnemonics.
This is a NOP change only relevant when reading the file or parsing it
with other tools.
opcodes/ChangeLog:
2015-09-09 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Add OP32 definition.
* s390-opc.txt: Reduce the opcode padding of some extended
mnemonics from 6 to the actual length (which is 4).
opcodes/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (print_insn_sparc): Handle the privileged register
%pmcdper.
gas/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (priv_reg_table): New privileged register
%pmcdper.
gas/testsuite/ChangeLog:
2015-08-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* gas/sparc/wrpr.s: Test writing to the privileged %pmcdper
register.
* gas/sparc/wrpr.d: ...and the expected result.
* gas/sparc/rdpr.s: Test reading from the privileged %pmcdper
register.
* gas/sparc/rdpr.d: ...and the expected result.
opcodes * i386-dis.c (print_insn): Fix decoding of three byte operands.
tests * gas/i386/intel.s: Add test of disassembly of a potential
three byte instuction at the end of a function.
* gas/i386/intel.d: Update expected disassembly.
HJ recently removed trailing space in binutils files, but unfortunately
they return when regenerating files in opcodes. This fixes the regen
process.
* cgen.sh: Trim trailing space from cgen output.
* ia64-gen.c (print_dependency_table): Don't generate trailing space.
(print_dis_table): Likewise.
* opc2c.c (dump_lines): Likewise.
(orig_filename): Warning fix.
* ia64-asmtab.c: Regenerate.
opcodes * arm-dis.c (print_insn_arm): Disassembling for all targets V6
and higher with ARM instruction set will now mark the 26-bit
versions of teq,tst,cmn and cmp as UNPREDICTABLE.
(arm_opcodes): Fix for unpredictable nop being recognized as a teq.
test * gas/arm/nops.d: New.
* gas/arm/nops.s: New.
* gas/arm/inst.d: Changed expectation file for 26-bit teq,
tst, cmn and cmp.
gas/testsuite/
PR binutils/13571
* gas/i386/i386.exp: Run i386-intel and x86_64-intel.
* gas/i386/i386-intel.d: New file.
* gas/i386/x86_64-intel.d: Likewise.
opcodes/
PR binutils/13571
* i386-dis.c (MOD_0FC3): New.
(PREFIX_0FC3): Renamed to ...
(PREFIX_MOD_0_0FC3): This.
(dis386_twobyte): Replace PREFIX_0FC3 with MOD_0FC3.
(prefix_table): Replace Ma with Ev on movntiS.
(mod_table): Add MOD_0FC3.
opcodes * arm-dis.c (print_insn_coprocessor): Added support for quarter
float bitfield format.
(coprocessor_opcodes): Changed VFP vmov reg,immediate to use new
quarter float bitfield format.
tests * gas/arm/vfpv3-const-conv.d: Update expected result due to change
of comment for vmov reg,immediate with VFP coprocessor.
Back in the day support for these processors was added, we probably
didn't want to waste PPC_OPCODE bits on minor variations. I've had a
complaint that disassembly of mfspr/mtspr was wrong for power8. This
patch fixes that problem.
Note that since -m860/-m850/-m821 are new gas options enabling the
mpc8xx specific mfspr/mtspr variants it is possible that this change
will break some mpc8xx assembly code. ie. you might need to modify
makefiles to pass -m860 to gas.
include/opcode/
* ppc.h (PPC_OPCODE_750, PPC_OPCODE_7450, PPC_OPCODE_860): Define.
opcodes/
* ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
* ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
gas/
* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
gas/testsuite/
* gas/ppc/titan.d: Correct mfmcsrr0 disassembly.
ISA 2.07 added a new category called Elemental Memory Barriers that modifies
the sync instruction to accept an additional operand ESYNC. Edmar added
support for this insruction varient here:
https://sourceware.org/ml/binutils/2012-02/msg00221.html
Looking at this closer, I see that the insert_ls() function is misnamed
(since it's attached to the ESYNC operand, not the LS operand) but more
importantly, it is silently modifying the LS operand value behind the
users back when the LS operand is either invalid or is incompatible with
the new ESYNC operand. The ISA 2.07 doc has an Assembler Note that clearly
states that assemblers that support the ESYNC operand should report all
invalid uses of LS and ESYNC. This patch changes the assembler to
error out on invalid and incompatible operand usage.
opcodes/
* ppc-opc.c (insert_ls): Test for invalid LS operands.
(insert_esync): New function.
(LS, WC): Use insert_ls.
(ESYNC): Use insert_esync.
gas/testsuite/
* gas/ppc/e6500.s <sync>: Fix invalid test.
* gas/ppc/e6500.d: Likewise.
include * dis-asm.h (struct disassemble_info): Add stop_vma field.
binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the
disassemble_info structure when disassembling code sections with
-d.
* doc/binutils.texi (objdump): Document the discrepancy between -d
and -D.
opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
requested region lies beyond it.
* bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
looking for 32-bit insns.
* mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
data.
* sh-dis.c (print_insn_sh): Likewise.
* tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
blocks of instructions.
* vax-dis.c (print_insn_vax): Check that the requested address
does not clash with the stop_vma.
tests * gas/arm/backslash-at.s: Add extra .byte directives so that the
foo symbol does not appear to point half way through an
instruction.
* gas/arm/backslash-at.d: Update expected disassembly.
* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand
with the value of either a 0 or 1. It also defines an extended mnemonic
with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1".
I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the
problem is, optional operands that are ommitted always default to the
value 0, which is wrong in this case. I have added support for allowing
non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE
that specifies that the default operand value to be used is stored in the
SHIFT field of the operand field immediately following this one.
This fixes the rfebb issue. I also fixed the mftb and mfcr instructions
so they use the same mechanism. This allows us to flag invalid uses of
mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd].
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New.
(ppc_optional_operand_value): New inline function.
opcodes/
* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
* ppc-opc.c (FXM4): Add non-zero optional value.
(TBR): Likewise.
(SXL): Likewise.
(insert_fxm): Handle new default operand value.
(extract_fxm): Likewise.
(insert_tbr): Likewise.
(extract_tbr): Likewise.
gas/
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
gas/testsuite/
* gas/ppc/power8.d: Fixup rfebb test results.
* gas/ppc/a2.s: Fix invalid mfcr test.
* gas/ppc/a2.d: Likewise.
In the commit that added PowerPC Pair Singles, Ben accidentally removed
a comment and re-added an unused MTMSRD_L macro Alan had recently deleted.
This was probably just an oversite when he was refreshing his patch to
trunk.
opcodes/
* ppc-opc.c: Add comment accidentally removed by old commit.
(MTMSRD_L): Delete.
This commit adds a new extended menmonic for "sync 0" (same as "sync").
The ISA documentation doesn't explicitly mention hwsync as an extended
mnemonic (yet), but it does mention "heavyweight sync" and "hwsync" as
the operation that gets performed when the sync's L field is 0.
This is only enabled for POWER4 and later.
opcodes/
* ppc-opc.c: (powerpc_opcodes) <hwsync>: New extended mnemonic.
gas/testsuite/
* gas/ppc/a2.d: Fixup test case due to new extended mnemonic.
* gas/ppc/power4.s <hwsync, lwsync, ptesync, sync>: Add tests.
* gas/ppc/power4.d: Likewise.
The ARMv8.1 architecture introduced the Privileged Access Never extension. This
adds a processor state field PSTATE.PAN which can be accessed using the MRS/MSR
instructions.
This patch adds support for the PAN architecture feature and processor state
field to libopcode.
include/opcode
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_PAN): New.
(aarch64_sys_reg_supported_p): Declare.
(aarch64_pstatefield_supported_p): Declare.
opcodes/
2015-06-01 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (F_ARCHEXT): New.
(aarch64_sys_regs): Add "pan".
(aarch64_sys_reg_supported_p): New.
(aarch64_pstatefields): Add "pan".
(aarch64_pstatefield_supported_p): New.
As pointed out before, the documentation mandates the rounding mode to
follow the GPR, so disassembler should produce output accordingly.
gas/testsuite/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512f.s: Adjust operand order for Intel syntax
vcvt{,u}si2ss.
* gas/i386/x86-64-avx512f.s: Adjust operand order for Intel
syntax vcvt{,u}si2s{d,s}.
opcodes/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* i386-dis.c (print_insn): Swap rounding mode specifier and
general purpose register in Intel mode.
As pointed out before, the documentation mandates the rounding mode to
follow the GPR, so gas should accept such input. As the brojen code got
released already we sadly will need to continue to also accept the
badly ordered operands.
gas/testsuite/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512f-intel.d: Adjust expectations on operand order.
* gas/i386/evex-lig256-intel.d: Likewise.
* gas/i386/evex-lig512-intel.d: Likewise.
* gas/i386/x86-64-avx512f-intel.d: Likewise.
* gas/i386/x86-64-evex-lig256-intel.d: Likewise.
* gas/i386/x86-64-evex-lig512-intel.d: Likewise.
opcodes/
2015-06-01 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl: New IntelSyntax entries for vcvt{,u}si2s{d,s}.
* i386-tbl.h: Regenerate.
AMD64 spec and Intel64 spec differ in direct unconditional branches in
64-bit mode. AMD64 supports direct unconditional branches with 16-bit
offset via the data size prefix, which truncates RIP to 16 bits, while
the data size prefix is ignored by Intel64.
This patch adds -mamd64/-mintel64 option to x86-64 assembler and
-Mamd64/-Mintel64 option to x86-64 disassembler. The most permissive
ISA, which is AMD64, is the default.
GDB can add an option, similar to
(gdb) help set disassembly-flavor
Set the disassembly flavor.
The valid values are "att" and "intel", and the default value is "att".
to select which ISA to disassemble.
binutils/
PR binutis/18386
* doc/binutils.texi: Document -Mamd64 and -Mintel64.
gas/
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
gas/testsuite/
PR binutis/18386
* gas/i386/i386.exp: Run x86-64-branch-2 and x86-64-branch-3.
* gas/i386/x86-64-branch.d: Also pass -Mintel64 to objdump.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
* gas/i386/x86-64-branch-2.d: New file.
* gas/i386/x86-64-branch-2.s: Likewise.
* gas/i386/x86-64-branch-3.l: Likewise.
* gas/i386/x86-64-branch-3.s: Likewise.
ld/testsuite/
PR binutis/18386
* ld-x86-64/tlsgdesc.dd: Also pass -Mintel64 to objdump.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/x86-64.exp (x86_64tests): Also pass -Mintel64 to
objdump for tlspic.dd and tlsgdesc.dd.
opcodes/
PR binutis/18386
* i386-dis.c: Add comments for '@'.
(x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
(enum x86_64_isa): New.
(isa64): Likewise.
(print_i386_disassembler_options): Add amd64 and intel64.
(print_insn): Handle amd64 and intel64.
(putop): Handle '@'.
(OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
* i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
* i386-opc.h (AMD64): New.
(CpuIntel64): Likewise.
(i386_cpu_flags): Add cpuamd64 and cpuintel64.
* i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
Mark direct call/jmp without Disp16|Disp32 as Intel64.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Remove the wait instructions for server processors, since they were never
implemented. Also add the extra operands added to the tlbie and slbia
instructions with ISA 2.06 and ISA 2.05 respectively.
binutils/
* MAINTAINERS: Add myself as PPC maintainer.
opcodes/
* ppc-opc.c (IH) New define.
(powerpc_opcodes) <wait>: Do not enable for POWER7.
<tlbie>: Add RS operand for POWER7.
<slbia>: Add IH operand for POWER6.
gas/testsuite/
* gas/ppc/power4.d: Add a slbia test.
* gas/ppc/power4.s: Likewise.
* gas/ppc/power6.d: Add slbia and tlbie tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d: Remove wait tests. Add a tlbie test.
* gas/ppc/power7.s: Likewise.
Disp16 and Disp32 aren't supported by direct branches in 64-bit mode.
This patch removes them from 64-bit direct branches.
* opcodes/i386-opc.tbl (call): Remove Disp16|Disp32 from 64-bit
direct branch.
(jmp): Likewise.
* i386-tbl.h: Regenerated.
* ppc-opc.c (DCBT_EO): New define.
(powerpc_opcodes) <lbarx>: Enable for POWER8 and later.
<lharx>: Likewise.
<stbcx.>: Likewise.
<sthcx.>: Likewise.
<waitrsv>: Do not enable for POWER7 and later.
<waitimpl>: Likewise.
<dcbt>: Default to the two operand form of the instruction for all
"old" cpus. For "new" cpus, use the operand ordering that matches
whether the cpu is server or embedded.
<dcbtst>: Likewise.
gas/testsuite/
* gas/ppc/a2.s: Fixup test case due to dcbt/dcbtst embedded operand
ordering change.
* gas/ppc/a2.d: Likewise.
* gas/ppc/476.d: Likewise.
* gas/ppc/booke.s: Remove invalid 3 operand dcbt tests.
* gas/ppc/booke.d: Likewise.
* gas/ppc/power7.s: Remove lbarx, lharx, stbcx., sthcx., waitrsv
and waitimpl tests.
* gas/ppc/power7.d: Likewise.
Certain conversion operations as well as vfpclassp{d,s} are ambiguous
when the input operand is in memory and no broadcast is being used.
While in Intel mode this gets resolved by printing suitable operand
size modifiers, AT&T mode need mnemonic suffixes to be added.
gas/testsuite/
2015-04-23 Jan Beulich <jbeulich@suse.com>
* gas/i386/avx512dq.d: Add 'z' suffix to vfpclassp{d,s} non-
register, non-broadcast cases.
* gas/i386/x86-64-avx512dq.d: Likewise.
* gas/i386/avx512dq_vl.d: Add 'x' and 'y' suffixes to
vcvt{,u}qq2ps and vfpclassp{d,s} non-register, non-broadcast
cases.
* gas/i386/x86-64-avx512dq_vl.d: Likewise.
* gas/i386/avx512f_vl.d: Add 'x' and 'y' suffixes to
vcvt{,t}pd2{,u}dq and vcvtpd2ps non-register, non-broadcast
cases.
* gas/i386/x86-64-avx512f_vl.d: Likewise.
opcodes/
2015-04-23 Jan Beulich <jbeulich@suse.com>
* i386-dis.c (putop): Extend "XY" handling to AVX512. Handle "XZ".
* i386-dis-evex.h.c (vcvtpd2ps, vcvtqq2ps, vcvttpd2udq,
vcvtpd2udq, vcvtuqq2ps, vcvttpd2dq, vcvtpd2dq): Add %XY.
(vfpclasspd, vfpclassps): Add %XZ.
This patch puts rdrand and rdseed in prefix_table so that invalid
prefixes for rdrand and rdseed are handled properly.
gas/testsuite/
PR binutils/17898
* gas/i386/prefix.s: Add rdrand/rdseed prefix tests.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/17898
* i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ...
(PREFIX_MOD_0_0FC7_REG_6): This.
(PREFIX_MOD_3_0FC7_REG_6): New.
(PREFIX_MOD_3_0FC7_REG_7): Likewise.
(prefix_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Add PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
(mod_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Use PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
2015-04-15 Renlin Li <renlin.li@arm.com>
opcodes/:
* arm-dis.c (thumb32_opcodes): Define 'D' format control code,
use it for ssat and ssat16.
(print_insn_thumb32): Add handle case for 'D' control code.
gas/testsuite/:
* gas/arm/arch7em.d: Adjust required ssat and ssat16 immediate field.
* gas/arm/thumb32.d: Likewise.
The gdb TUI is calling gdb_print_insn() (which calls
disassemble_init_powerpc()) enough to show up high in profiles. As
suggested by Alan, only initialise if the indices are empty.
opcodes/ChangeLog:
2015-03-25 Anton Blanchard <anton@samba.org>
* ppc-dis.c (disassemble_init_powerpc): Only initialise
powerpc_opcd_indices and vle_opcd_indices once.
opcodes/
* mips-opc.c (decode_mips_operand): Fix constraint issues
with u and y operands.
gas/testsuite/
* gas/mips/mips.exp: Added branch constraints testcase.
* gas/mips/r6-branch-constraints.s: New test.
* gas/mips/r6-branch-constraints.l: New test.
2015-03-03 Jiong Wang <jiong.wang@arm.com>
opcode/
* arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.
binutils/testsuite/
* binutils-all/arm/rvct_symbol.s: New testcase.
* binutils-all/arm/objdump.exp: Run it.
These are sufficient to link an --enable-targets=all GDB build in C++
mode, on x86_64 Fedora 20.
include/opcode/
2015-02-19 Pedro Alves <palves@redhat.com>
* cgen.h [__cplusplus]: Wrap in extern "C".
* msp430-decode.h [__cplusplus]: Likewise.
* nios2.h [__cplusplus]: Likewise.
* rl78.h [__cplusplus]: Likewise.
* rx.h [__cplusplus]: Likewise.
* tilegx.h [__cplusplus]: Likewise.
opcodes/
2015-02-19 Pedro Alves <palves@redhat.com>
* microblaze-dis.h [__cplusplus]: Wrap in extern "C".
* rl78-decode.opc: Add 'a' attribute to instructions that support
[HL+0] addressing.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78): Display the offset in [HL+0]
addresses.
Building GDB as a C++ program, we see:
In file included from gdb/microblaze-tdep.c:37:0:
gdb/../opcodes/../opcodes/microblaze-opcm.h: At global scope:
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected identifier before ‘or’ token
ncget, ncput, muli, bslli, bsrai, bsrli, mului, or, and, xor,
^
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected ‘}’ before ‘or’ token
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected unqualified-id before ‘or’ token
gdb/../opcodes/../opcodes/microblaze-opcm.h:60:1: error: expected declaration before ‘}’ token
};
^
opcodes/ChangeLog:
2015-02-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* microblaze-opcm.h (or, and, xor): Rename to microblaze_or,
microblaze_and, microblaze_xor.
* microblaze-opc.h (opcodes): Adjust.
Relaxable fragments can be relaxed when there are alignment requirements.
Besides, insert a dummy fragment in the final to make sure that all
alignment is traversed. Finally, convert these fragments
in md_convert_frag with relax_table.
- 32 128 bit vector registers (overlapping with the existing 16 64 bit
floating point registers)
- vector double instructions
- vector integer instructions
- scalar vector instructions (allowing to have more floating point
registers for scalar operations)
- vector string instructions
gas/ChangeLog:
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
gas/testsuite/ChangeLog:
* gas/s390/esa-g5.d: Add a variant without the optional operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z10.d: For variants with a zero optional argument
it is not dumped by objdump anymore.
* gas/s390/zarch-zEC12.d: Likewise.
* gas/s390/zarch-z13.d: New file.
* gas/s390/zarch-z13.s: New file.
* gas/s390/s390.exp: Run the test for the z13 files.
include/opcode/ChangeLog:
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13.
ld/testsuite/ChangeLog:
* ld-s390/tlsbin.dd: The nopr register operand is optional and not
printed if 0 anymore.
opcodes/ChangeLog:
* s390-dis.c (s390_extract_operand): Support vector register
operands.
(s390_print_insn_with_opcode): Support new operands types and add
new handling of optional operands.
* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
and include opcode/s390.h instead.
(struct op_struct): New field `flags'.
(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
(dumpTable): Dump flags.
(main): Parse flags from the s390-opc.txt file. Add z13 as cpu
string.
* s390-opc.c: Add new operands types, instruction formats, and
instruction masks.
(s390_opformats): Add new formats for .insn.
* s390-opc.txt: Add new instructions.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add JALRC alias for JIALC.
Remove the operand from NAL.
gas/testsuite/
* gas/mips/r6.s: Test JALRC and NAL
* gas/mips/r6-n32.d: Add expected output for JALRC and NAL.
* gas/mips/r6-n64.d: Likewise.
* gas/mips/r6.d: Likewise.
On further reading of ISA manual it appears gas should have been
treating mftb and mftbu as extended mnemonics for mfspr, for ISA 2.03
and later.
opcodes/
* ppc-opc.c (powerpc_opcodes): Make mftb* generate mfspr for
power4 and later.
gas/testsuite/
* gas/ppc/a2.d: Update for mftb change.
* gas/ppc/476.d: Likewise.
mftb is marked phased out in the architecture manual, but we can keep
it as an extended mnemonic for mftbl.
* ppc-opc.c (powerpc_opcodes <mftb>): Don't deprecate for power7.
(TB): Delete.
(insert_tbr, extract_tbr): Validate tbr number.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
This patch annotates the following SPARC instructions as VIS3B
instructions: ldx *, %efsr, fpadd64, fpsub64, fpcmpule8, fpcmpune8,
fpcmpugt8, fpcmpueq8. It also improves the documentation of the VIS3B
capability in several headers.
Tested in sparc64-unknown-linux-gnu and sparc-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Annotate several instructions with
the HWCAP2_VIS3B hwcap.
include/opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (HWCAP2_VIS3B): Documentation improved.
include/elf/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc.h (ELF_SPARC_HWCAP2_VIS3B): Documentation improved.
This patch fixes the hwcap entries in `sparc-opcodes' (which were
incorrectly located in the flags field) for the following
instructions:
wr r,r,%sys_tick
wr r,i,%sys_tick
wr r,r,%sys_tick_cmpr
wr r,i,%sys_tick_cmpr
edge8n edge8ln edge16n edge16ln edge32n edge32ln
bmask bshuffle siam
Tested in sparc-unknown-linux-gnu and sparc64-unknown-linux-gnu.
No visible regressions.
opcodes/ChangeLog:
2014-10-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc-opcodes): Fix several misplaced hwcap
entries.
First, add nds32 audio ISA extension including opcodes and registers.
Second, redesign the disassemble implement.
The original disassemble decode instruction opcode using switch-case.
It is hard to synchronize when adding new instructions.
Therefore, the new implement reuses nds32_opcodes to dump the instructions.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
This change moves the microMIPS 10-bit uninterpreted immediate code
embedded at bits 25..16 in the SYSCALL, WAIT, SDBBP and HYPCALL
instructions from `B' over to `+J' which is the operand code used in
the standard MIPS instruction set for a similar code embedded at bits
20..11, currently used by HYPCALL only in that set.
opcodes/
* micromips-opc.c (decode_micromips_operand): Rename `B' to `+J'.
(micromips_opcodes): Use "+J" in place of "B" for "hypcall",
"sdbbp", "syscall" and "wait".
include/opcode/
* mips.h: Document the move of `MICROMIPSOP_*_CODE10' from `B'
over to `+J'.
2014-08-21 Nathan Sidwell <nathan@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
opcodes/
* arm-dis.c (print_arm_address): Negate the GPR-relative offset
returned if the U bit is set.
2014-08-21 Paul Brook <paul@codesourcery.com>
gas/testsuite/
* gas/arm/arch7a-mp.d: Adjust according to `print_arm_address'
offset fix.
* gas/arm/arch7r-mp.d: Likewise.
The 48-bit LI instruction encoding has been removed from the microMIPS
ISA and no implementation ever made that included it.
* micromips-opc.c (micromips_opcodes): Remove #ifdef-ed out
48-bit "li" encoding.
readability and also fixes some minor issues.
S/390: Split disassembler routine into smaller functions
S/390: Fix disassembler's treatment of signed/unsigned operands
S/390: Fix off-by-one error in disassembler initialization
S/390: Simplify opcode search loop in disassembler
S/390: Drop function pointer dereferences in disassembler
S/390: Various minor simplifications in disassembler
These multiple if statements can be condensed down into a single if
statement and an array of strings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The variables used to track insn state should be pushed down into the
private_data structure to avoid pollution across calls.
This also happens to fix the output when hitting comments/invalid insns
which needs to tweak a gas test.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If the user gives us an unaligned PC, then dump an error as such.
Otherwise if you try to disassemble at an odd address, the output
will look weird (it'll read one byte earlier).
This can be seen in one of the gas tests where data is in the middle
of .text, so move the data to .data like it should be in the first place.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current code ignores memory read errors which isn't a great idea.
So add a helper function which takes care of error checking and update
the code to use that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gas/
* config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
and INSN_COPROC_MOVE_DELAY to INSN_COPROC_MOVE throughout.
include/opcode/
* mips.h (INSN_LOAD_COPROC_DELAY): Rename to...
(INSN_LOAD_COPROC): New define.
(INSN_COPROC_MOVE_DELAY): Rename to...
(INSN_COPROC_MOVE): New define.
opcodes/
* micromips-opc.c (COD): Rename throughout to...
(CM): New define, update to use INSN_COPROC_MOVE.
(LCD): Rename throughout to...
(LC): New define, update to use INSN_LOAD_COPROC.
* mips-opc.c: Likewise.
Even though the opcodes were defined for these instructions,
the actual instruction definitions were lacking.
cpu/
* or1korbis.cpu (l-msync, l-psync, l-csync): New instructions.
opcodes/
* or1k-desc.c, * or1k-desc.h, * or1k-opc.c, * or1k-opc.h,
* or1k-opinst.c: Regenerate.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
There are legitimate reasons to allow a signed value in a cmpli insn
field, for example to test for a "stw r1,lock@sdarel(r13)" instruction
in user code, a kernel might use
subis r3,r3,STW_R1_0R13@ha # subtract off high part
cmplwi r3,lock@sdarel # is low part accessing lock?
Since the lock@sdarel may take a range of -32768 to 32767,
the allowed range of cmpli immediate must be at least [-32768,65535].
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Treat field of cmpli
insn as a bitfield; Use complain_overflow_bitfield.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
opcodes/
* ppc-opc.c (UISIGNOPT): Define and use with cmpli.
gas/
* config/tc-ppc.c (ppc_insert_operand): Handle PPC_OPERAND_SIGNOPT
on unsigned fields. Comment on PPC_OPERAND_SIGNOPT signed fields
in 64-bit mode.
gold/
* powerpc.cc (relocate): Treat field of cmpli insn as a bitfield.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
This adds support for the load-link/store-conditional
l.lwa/l.swa atomic instructions.
The support is added in such way, that the cpu description not
only describes the mnemonics, but also the functionality.
A couple of fixes to typos in nearby/related code are also snuck
into this.
cpu/
* or1korbis.cpu (h-atomic-reserve): New hardware.
(h-atomic-address): Likewise.
(insn-opcode): Add opcodes for LWA and SWA.
(atomic-reserve): New operand.
(atomic-address): Likewise.
(l-lwa, l-swa): New instructions.
(l-lbs): Fix typo in comment.
(store-insn): Clear atomic reserve on store to atomic-address.
Fix register names in fmt field.
opcodes/
* or1k-desc.c: Regenerated.
* or1k-desc.h: Likewise.
* or1k-opc.c: Likewise.
* or1k-opc.h: Likewise.
* or1k-opinst.c: Likewise.
This patch firstly adds support for mips32r3 mips32r5, mips64r3
and mips64r5. Secondly it adds support for the eretnc instruction.
ChangeLog:
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3,
mips32r5 and mips64r5.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
* cpu-mips.c (arch_info_struct): Likewise.
* elfxx-mips.c (mips_set_isa_flags): Likewise.
gas/
* tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3
and mips64r5.
(ISA_HAS_64BIT_FPRS): Likewise.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5.
(ISA_HAS_DROR): Likewise.
(options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and
OPTION_MIPS64R5.
(mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
(md_parse_option): Likewise.
(s_mipsset): Likewise.
(mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3
and mips64r5. Also change p5600 entry to be mips32r5.
* configure.in: Add support for mips32r3, mips32r5, mips64r3 and
mips64r5.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and
-mips64r5 command line options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3,
mips32r5, mips64r3 and mips64r5 isas to the testsuite.
* gas/mips/r5.s: New test.
* gas/mips/r5.d: Likewise.
include/opcode/
* mips.h (INSN_ISA_MASK): Updated.
(INSN_ISA32R3): New define.
(INSN_ISA32R5): New define.
(INSN_ISA64R3): New define.
(INSN_ISA64R5): New define.
(INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32
INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered.
(mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and
mips64r5.
(INSN_UPTO32R3): New define.
(INSN_UPTO32R5): New define.
(INSN_UPTO64R3): New define.
(INSN_UPTO64R5): New define.
(ISA_MIPS32R3): New define.
(ISA_MIPS32R5): New define.
(ISA_MIPS64R3): New define.
(ISA_MIPS64R5): New define.
(CPU_MIPS32R3): New define.
(CPU_MIPS32R5): New define.
(CPU_MIPS64R3): New define.
(CPU_MIPS64R5): New define.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction.
(I34): New define.
(I36): New define.
(I66): New define.
(I68): New define.
* mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and
mips64r5.
(parse_mips_dis_option): Update MSA and virtualization support to
allow mips64r3 and mips64r5.
This fixes an issue with Mark Shinwell's "Rearrange MIPS INSN* masks" patch
(https://sourceware.org/ml/binutils/2007-11/msg00231.html). In the patch
the pref instruction had its membership flags changed from I4|I32|G3 to
I4_32|G3. Unfortunately G3 was defined as being I4, which made the actual
expanded flags as: I4|I32|I4 and therefore the membership flags should have
been I4_32. Since the patch was committed G3 was redefined to be I4|EE. This
fix just removes I4 from G3 making the expanded membership flags for pref as
I4_32|EE.
ChangeLog:
opcodes/
* mips-opc.c (G3): Remove I4.
This patch updates multiple opcode prefix processing:
1. Always print prefix together with bad opcode.
2. Since the last seen segment register prefix is active, we only print
the active segment register in the memory operand.
3. The 0xf2 and 0xf3 prefixes take precedence over the 0x66 prefix as the
opcode prefix. Also the last of the 0xf2 and 0xf3 prefixes wins.
4. Ignore invalid 0xf2/0xf3 prefixes if they aren't mandatory.
gas/testsuite/
PR binutils/16893
* gas/i386/katmai.d: Expect "gs" as prefix.
* gas/i386/long-1.s: Replace movapd with movss.
* gas/i386/x86-64-long-1.s: Likewise.
* gas/i386/long-1-intel.d: Updated.
* gas/i386/long-1.d: Likewise.
* gas/i386/x86-64-long-1-intel.d: Likewise.
* gas/i386/x86-64-long-1.d: Likewise.
* gas/i386/prefix.s: Add tests for multiple 0x66, 0x67, 0xf0,
0xf2 and 0xf3 prefixes.
* gas/i386/prefix.d: Updated.
opcodes/
PR binutils/16893
* i386-dis.c (twobyte_has_mandatory_prefix): New variable.
(end_codep): Likewise.
(mandatory_prefix): Likewise.
(active_seg_prefix): Likewise.
(ckprefix): Set active_seg_prefix to the active segment register
prefix.
(seg_prefix): Removed.
(get_valid_dis386): Use the last of PREFIX_REPNZ and PREFIX_REPZ
for prefix index. Ignore the index if it is invalid and the
mandatory prefix isn't required.
(print_insn): Set mandatory_prefix if the PREFIX_XXX prefix is
mandatory. Don't set PREFIX_REPZ/PREFIX_REPNZ/PREFIX_LOCK bits
in used_prefixes here. Don't print unused prefixes. Check
active_seg_prefix for the active segment register prefix.
Restore the DFLAG bit in sizeflag if the data size prefix is
unused. Check the unused mandatory PREFIX_XXX prefixes
(append_seg): Only print the segment register which gets used.
(OP_E_memory): Check active_seg_prefix for the segment register
prefix.
(OP_OFF): Likewise.
(OP_OFF64): Likewise.
(OP_DSreg): Set active_seg_prefix to PREFIX_DS if it is unset.
sigsetjmp/siglongjmp without saving the signal mask is faster than
setjmp/longjmp on systems where the signal mask is saved. This patch
uses sigsetjmp/siglongjmp without saving the signal mask if possible.
PR binutils/16886
* config.in: Regenerated.
* configure: Likewise.
* configure.in: Check if sigsetjmp is available.
* h8500-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_h8500): Replace setjmp with OPCODES_SIGSETJMP.
* i386-dis.c (dis_private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn): Replace setjmp with OPCODES_SIGSETJMP.
* ns32k-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_ns32k): Replace setjmp with OPCODES_SIGSETJMP.
* sysdep.h (OPCODES_SIGJMP_BUF): New macro.
(OPCODES_SIGSETJMP): Likewise.
(OPCODES_SIGLONGJMP): Likewise.
* vax-dis.c (private): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_vax): Replace setjmp with OPCODES_SIGSETJMP.
* xtensa-dis.c (dis_private): Replace jmp_buf with
OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_xtensa): Replace setjmp with OPCODES_SIGSETJMP.
* z8k-dis.c(instr_data_s): Replace jmp_buf with OPCODES_SIGJMP_BUF.
(fetch_data): Replace longjmp with OPCODES_SIGLONGJMP.
(print_insn_z8k): Replace setjmp with OPCODES_SIGSETJMP.
0x9b (fwait) is both an instruction and an opcode prefix. When 0x9b is
treated as an instruction, we need to handle any prefixes before it.
This patch handles it properly.
gas/testsuite/
PR binutils/16891
* gas/i386/opcode.s: Add test for fwait with prefix.
* gas/i386/opcode-intel.d: Updated.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
opcodes/
PR binutils/16891
* i386-dis.c (print_insn): Handle prefixes before fwait.
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
For gathers with indices larger than elements (e. g.)
vpgatherqd ymm6{k1}, ZMMWORD PTR [ebp+zmm7*8-123]
We currently treat memory size as a size of index register, while it is
actually should be size of destination register:
vpgatherqd ymm6{k1}, YMMWORD PTR [ebp+zmm7*8-123]
This patch fixes it.
opcodes/
* i386-opc.tbl: Change memory size for vgatherpf0qps, vgatherpf1qps,
vscatterpf0qps, vscatterpf1qps, vgatherqps, vpgatherqd, vpscatterqd,
vscatterqps.
* i386-tbl.h: Regenerate.
gas/testsuite/
* gas/i386/avx512pf-intel.d: Change memory size for vgatherpf0qps,
vgatherpf1qps, vscatterpf0qps, vscatterpf1qps.
* gas/i386/avx512pf.s: Ditto.
* gas/i386/x86-64-avx512pf-intel.d: Ditto.
* gas/i386/x86-64-avx512pf.s: Ditto.
* gas/i386/avx512f-intel.d: Change memory size for vgatherqps,
vpgatherqd, vpscatterqd, vscatterqps.
* gas/i386/avx512f.s: Ditto.
* gas/i386/x86-64-avx512f-intel.d: Ditto.
* gas/i386/x86-64-avx512f.s: Ditto.
and %hstick_enable to the Sparc assembler.
* config/tc-sparc.c (hpriv_reg_table): Added entries for
%hstick_offset and %hstick_enable.
* doc/c-sparc.texi (Sparc-Regs): Document the %hstick_offset and
%hstick_enable hyperprivileged registers.
* sparc-dis.c (v9_hpriv_reg_names): Names for %hstick_offset and
%hstick_enable added.
* gas/sparc/rdhpr.s: Test rd %hstick_offset and %hstick_enable.
* gas/sparc/rdhpr.d: Likewise.
* gas/sparc/wrhpr.s: Test wr %hstick_offset and %hstick_enable.
* gas/sparc/wrhpr.d: Likewise.
* rx-decode.opc (bwl): Allow for bogus instructions with a size
field of 3.
(sbwl, ubwl, SCALE): Likewise.
* rx-decode.c: Regenerate.
* gas/rx/mov.d: Update expected disassembly.
2014-02-04 Heiher <r@hev.cc>
* elfxx-mips.c (mips_set_isa_flags): Use E_MIPS_ARCH_64R2 for
Loongson-3A.
(mips_mach_extensions): Make bfd_mach_mips_loongson_3a an
extension of bfd_mach_mipsisa64r2.
opcodes/
2014-02-04 Heiher <r@hev.cc>
* mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A.
gas/
2014-02-04 Heiher <r@hev.cc>
* config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
Loongson-3A.
We currently support version of vcvtps2ph with sae and only 1 register operand.
This version is encoded as if missing operand was equal to ymm0.
I didn't found any references to this variant in
http://download-software.intel.com/sites/default/files/managed/50/1a/319433-018.pdf
This patch removes it.
opcodes/
* i386-opc.tbl: Remove wrong variant of vcvtps2ph
* i386-tbl.h: Regenerate.
binutils/
* version.c (print_version): Update copyright year to 2014.
gas/
* as.c (parse_args): Update copyright year to 2014.
gold/
* version.cc (print_version): Update copyright year to 2014.
ld/
* ldver.c (ldversion): Update copyright year to 2014.
opcodes/
* i386-gen.c (process_copyright): Update copyright year to 2014.
Add two more as test files for user special and system register.
Fix typo.
2013-12-17 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* gas/nds32/nds32.exp: Add system and user special register tests.
* gas/nds32/sys-reg.s: New test.
* gas/nds32/sys-reg.d: Likewise.
* gas/nds32/usr-spe-reg.s: Likewise.
* gas/nds32/usr-spe-reg.d: Likewise.
* gas/nds32/alu-2.d: Delete the new blank line at EOF.
* gas/nds32/br-1.d: Likewise.
* gas/nds32/br-2.d: Likewise.
* gas/nds32/ji-jr.d: Likewise.
* gas/nds32/lsi.d: Likewise.
* nds32-dis.c (sr_map): Add system register table for disassembling.
(usr_map): Fix typo.
* nds32-asm.c (keyword_sr): Add embedded debug registers.
2013-12-16 Andrew Bennett <andrew.bennett@imgtec.com>
gas/testsuite/gas/mips/
* mips.exp: Add CP1 register name tests.
* cp1-names-mips32.d: New test.
* cp1-names-mips32r2.d: New test.
* cp1-names-mips64.d: New test.
* cp1-names-mips64r2.d: New test.
* cp1-names-numeric.d: New test.
* cp1-names-r3000.d: New test.
* cp1-names-r4000.d: New test.
* cp1-names-sb1.d: New test.
* cp1-names.s: New test.
* micromips-insn32.d: Add the correct symbolic names for the CP1
registers.
* micromips-noinsn32.d: Likewise.
* micromips-trap.d: Likewise.
* micromips.d: Likewise.
opcodes/
* mips-dis.c: Add mips_cp1_names pointer.
(mips_cp1_names_numeric): New array.
(mips_cp1_names_mips3264): New array.
(mips_arch_choice): Add cp1_names.
(mips_arch_choices): Add relevant cp1 register name array to each of
the elements.
(set_default_mips_dis_options): Add support for setting up the
mips_cp1_names pointer.
(parse_mips_dis_option): Add support for the cp1-names command line
variable. Also setup the mips_cp1_names pointer.
(print_reg): Print out name of the cp1 register.
The element index range for the following MIPS MSA instructions: sldi, splati,
copy_s, copy_u, insert and insve is 1 bit too large. This patch fixes this issue.
ChangeLog:
gas/testsuite/gas/mips/
* msa.s: Reduced maximum element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* msa64.s: Likewise.
* micromips@msa.d: Likewise.
* micromips@msa64.d: Likewise.
* msa.d: Likewise.
* msa64.d: Likewise.
include/opcode/
* mips.h: Updated description of +o, +u, +v and +w for MIPS and
microMIPS.
opcodes/
* micromips-opc.c (decode_micromips_operand): Reduced range of +o, +u,
+v and +w.
(micromips_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* opcodes/mips-opc.c (decode_mips_operand): Reduced range of +o, +u,
+v and +w.
(mips_builtin_opcodes): Reduced element index range for sldi, splati,
copy_s, copy_u, insert and insve instructions.
* config/tc-aarch64.c (set_other_error): New function.
(parse_sys_reg): Add new parameter 'sys_reg' and if non-NULL set
the variable to which it points with 'o'.
(parse_operands): Update; check for write to read-only system
registers or read from write-only ones.
gas/testsuite/
* gas/aarch64/diagnostic.s: Add tests.
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/tracereg-illegal.d: New file.
* gas/aarch64/tracereg-illegal.l: Ditto.
* gas/aarch64/tracereg-illegal.s: Ditto.
* gas/aarch64/tracereg.d: Ditto.
* gas/aarch64/tracereg.s: Ditto.
include/opcode
* aarch64.h (aarch64_sys_reg_readonly_p): New declaration.
(aarch64_sys_reg_writeonly_p): Ditto.
opcodes/
* aarch64-opc.c (CPENT): New define.
(F_READONLY, F_WRITEONLY): Likewise.
(aarch64_sys_regs): Add trace unit registers.
(aarch64_sys_reg_readonly_p): New function.
(aarch64_sys_reg_writeonly_p): Ditto.
* config/tc-aarch64.c (parse_sys_reg): Update to use aarch64_sys_reg;
call aarch64_sys_reg_deprecated_p and warn about the deprecated
system registers.
gas/testsuite/
* gas/aarch64/deprecated.d: New file.
* gas/aarch64/deprecated.l: New file.
* gas/aarch64/deprecated.s: New file.
* gas/aarch64/sysreg-1.s: Add tests.
* gas/aarch64/sysreg-1.d: Add tests.
include/opcode/
* aarch64.h (aarch64_sys_reg): New typedef.
(aarch64_sys_regs): Change to define with the new type.
(aarch64_sys_reg_deprecated_p): Declare.
opcodes/
* aarch64-opc.c (F_DEPRECATED): New macro.
(aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with
F_DEPRECATED.
(aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on
AARCH64_OPND_SYSREG.
Currently the disassembler for s390 (by default) assumes that a 31-bit
binary was compiled in "ESA" mode -- and then only disassembles a
limited opcode set. The change upgrades the default to the full "zarch"
opcode set even for 31-bit binaries.
opcodes/
* s390-dis.c (init_disasm): Default to full 'zarch' opcode
availability even for 31-bit programs.
opcodes/
* nios2-opc.c (nios2_builtin_reg): Use "sstatus" rather than "ba"
as the primary name of r30.
gas/
* config/tc-nios2.c (nios2_consume_arg): Make the "ba" warning
also test/refer to "sstatus". Reformat the warning message.
gas/testsuite/
* gas/nios2/warn_nobreak.l: Update text of warning messages.
* gas/nios2/registers.s: Use "sstatus" rather than "ba"
as the primary name of r30.
* gas/nios2/registers.d: Likewise.
* cr16-opc.c (REG): Cast NAME to 'reg' enum type to suppress
possible compiler warnings when the union's initializer is
actually meant for the 'preg' enum typed member.
* crx-opc.c (REG): Likewise.
2013-10-08 Jan Beulich <jbeulich@suse.com>
* i386-opc.tbl (invlpg): Use Anysize instead of Unspecified.
(clflush): Use Anysize instead of Byte|Unspecified.
(prefetch*): Likewise.
* i386-tbl.h: Re-generate.
* config/tc-arm.c (T16_32_TAB): Add _udf.
(do_t_udf): New function.
(insns): Add "udf".
* gas/arm/udf-bad.s: New file.
* gas/arm/udf-bad.d: New file.
* gas/arm/udf-bad.l: New file.
* gas/arm/udf.s: New file.
* gas/arm/udf.d: New file.
* gas/arm/udf.l: New file.
* arm-dis.c (arm_opcodes): Add udf.
(thumb_opcodes): Use "udf" mnemonic rather than UNDEFINED_INSTRUCTION.
(thumb32_opcodes): Add udf.w.
(print_insn_thumb32): Handle %H as the thumb32_opcodes comment says.
* s390-opc.txt: Fix description for fiebra, fidbra, and fixbra.
For the load fp integer instructions only the suppression flag was
new with z196 version.
immediate is not suitable for the 32-bit ABI.
* gas/aarch64/illegal.s: Add illegal constant for logical
operation.
* gas/aarch64/illegal.l: Add expected error message.
* mips.h (M_DEXT, M_DINS): Delete.
opcodes/
* micromips-opc.c (micromips_opcodes): Replace "dext" and "dins"
macro entries with "dextm", "dextu", "dinsm" and "dinsu" aliases.
Use +H rather than +C for the real "dext".
* mips-opc.c (mips_builtin_opcodes): Likewise.
gas/
* config/tc-mips.c (report_bad_range, report_bad_field): Delete.
(macro): Remove M_DEXT and M_DINS handling.
gas/testsuite/
* gas/mips/ext-ill.l, gas/mips/mips64r2-ill.l: Expect DEXT and DINS
error messages to have the same form as the EXT and INS ones.
* gas/mips/micromips-insn32.d, gas/mips/micromips-noinsn32.d,
gas/mips/micromips-trap.d, gas/mips/micromips.d,
gas/mips/micromips@mips64r2.d, gas/mips/mips64r2.d: Expect
"dext" and "dins" instead of "dextm", "dextu", "dinsm" and "dinsu".
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* mips-opc.c (mips_builtin_opcodes): Add a suffixless version of
VCLIPW.
gas/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* config/tc-mips.c (match_vu0_suffix_operand): Allow single-channel
suffixes to be elided too.
(mips_lookup_insn): Don't reject INSN2_VU0_CHANNEL_SUFFIX here.
(mips_ip): Assume .xyzw if no VU0 suffix is specified. Allow +N
to be omitted too.
gas/testsuite/
2013-08-06 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d: Allow
single-channel suffixes to be elided.
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Document new VU0 operand characters.
(OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types.
(OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R)
(OP_REG_R5900_ACC): New mips_reg_operand_types.
(INSN2_VU0_CHANNEL_SUFFIX): New macro.
(mips_vu0_channel_mask): Declare.
opcodes/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(print_vu0_channel): New function.
(print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(print_insn_args): Handle '#'.
(print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX.
* mips-opc.c (mips_vu0_channel_mask): New constant.
(decode_mips_operand): Handle new VU0 operand types.
(VU0, VU0CH): New macros.
(mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E"
for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2.
Use "+6" rather than "G" for QMFC2 and QMTC2.
gas/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (MAX_OPERANDS): Bump to 6.
(RWARN): Bump to 0x8000000.
(RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R)
(RTYPE_R5900_ACC): New register types.
(RTYPE_MASK): Include them.
(R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New
macros.
(reg_names): Include them.
(mips_parse_register_1): New function, split out from...
(mips_parse_register): ...here. Add a channels_ptr parameter.
Look for VU0 channel suffixes when nonnull.
(reg_lookup): Update the call to mips_parse_register.
(mips_parse_vu0_channels): New function.
(OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types.
(mips_operand_token): Add a "channels" field to the union.
Extend the comment above "ch" to OT_DOUBLE_CHAR.
(mips_parse_base_start): Match -- and ++. Handle channel suffixes.
(mips_parse_argument_token): Handle channel suffixes here too.
(validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX.
Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits.
Handle '#' formats.
(md_begin): Register $vfN and $vfI registers.
(operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I,
OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC.
(match_vu0_suffix_operand): New function.
(match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX.
(macro): Use "+7" rather than "E" for LDQ2 and STQ2.
(mips_lookup_insn): New function.
(mips_ip): Use it. Allow "+K" operands to be elided at the end
of an instruction. Handle '#' sequences.
gas/testsuite/
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de>
* gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric
coprocessor registers.
* gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d,
gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d,
gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests.
* gas/mips/mips.exp: Run them.
* mips.h (mips_pcrel_operand): Inherit from mips_int_operand.
(mips_int_operand_min, mips_int_operand_max): New functions.
(mips_decode_pcrel_operand): Use mips_decode_int_operand.
opcodes/
* mips-formats.h (PCREL): Reorder parameters and update the definition
to match new mips_pcrel_operand layout.
(JUMP, JALX, BRANCH): Update accordingly.
* mips16-opc.c (decode_mips16_operand): Likewise.
gas/
* config/tc-mips.c (match_int_operand): Use mips_int_operand_min
and mips_int_operand_max.
(mips16_immed_operand, mips16_immed_operands, MIPS16_NUM_IMMED):
Delete.
(mips16_immed_operand, mips16_immed_in_range_p): New functions.
(mips16_immed, mips16_extended_frag): Use them. Use mips_int_operand
instead of mips16_immed_operand.
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31)
(MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH)
(MIPS16_INSN_COND_BRANCH): Delete.
opcodes/
* mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags.
(WR_SP): Replace with...
(MOD_SP): ...this.
(mips16_opcodes): Update accordingly.
* mips-dis.c (print_insn_mips16): Likewise.
gas/
* config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same
flags for MIPS16 and non-MIPS16 instructions.
(gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block.
(gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too.
(gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling.
(can_swap_branch_p, get_append_method): Use the same flags for MIPS16
and non-MIPS16 instructions. Fix formatting.
* mips-opc.c (mips_builtin_opcodes): Remove WR_* and RD_* flags
for operands that are hard-coded to $0.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-opc.c (mips_builtin_opcodes): Use WR_31 rather than WR_d
for the single-operand forms of JALR and JALR.HB.
* micromips-opc.c (micromips_opcodes): Likewise JALR, JALRS, JALR.HB
and JALRS.HB.
* mips.h (mips_operand_type, mips_reg_operand_type): New enums.
(mips_operand, mips_int_operand, mips_mapped_int_operand)
(mips_msb_operand, mips_reg_operand, mips_reg_pair_operand)
(mips_pcrel_operand): New structures.
(mips_insert_operand, mips_extract_operand, mips_signed_operand)
(mips_decode_int_operand, mips_decode_pcrel_operand): New functions.
(decode_mips_operand, decode_micromips_operand): Declare.
opcodes/
* mips-formats.h: New file.
* mips-opc.c: Include mips-formats.h.
(reg_0_map): New static array.
(decode_mips_operand): New function.
* micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h.
(reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map)
(reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map)
(int_c_map): New static arrays.
(decode_micromips_operand): New function.
* mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map)
(micromips_to_32_reg_d_map, micromips_to_32_reg_e_map)
(micromips_to_32_reg_f_map, micromips_to_32_reg_g_map)
(micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2)
(micromips_to_32_reg_l_map, micromips_to_32_reg_m_map)
(micromips_to_32_reg_n_map, micromips_to_32_reg_q_map)
(micromips_imm_b_map, micromips_imm_c_map): Delete.
(print_reg): New function.
(mips_print_arg_state): New structure.
(init_print_arg_state, print_insn_arg): New functions.
(print_insn_args): Change interface and use mips_operand structures.
Delete GET_OP_S. Move GET_OP definition to...
(print_insn_mips): ...here. Update the call to print_insn_args.
(print_insn_micromips): Use print_insn_args.
gas/
* config/tc-mips.c (validate_mips_insn): Move further up file.
Add insn_bits and decode_operand arguments. Use the mips_operand
fields to work out which bits an operand occupies. Detect double
definitions.
(validate_micromips_insn): Move further up file. Call into
validate_mips_insn.
* mips.h (M_ACLR_OB, M_ASET_OB, M_CACHE_OB, M_CACHEE_OB, M_L_DOB)
(M_LB_A, M_LBE_OB, M_LBU_A, M_LBUE_OB, M_LD_A, M_LD_OB, M_LDC2_OB)
(M_LDL_OB, M_LDM_OB, M_LDP_OB, M_LDR_OB, M_LH_A, M_LHE_OB, M_LHU_A)
(M_LHUE_OB, M_LL_OB, M_LLD_OB, M_LLE_OB, M_LS_A, M_LW_A, M_LWE_OB)
(M_LWC0_A, M_LWC1_A, M_LWC2_A, M_LWC2_OB, M_LWC3_A, M_LWL_A, M_LWL_OB)
(M_LWLE_OB, M_LWM_OB, M_LWP_OB, M_LWR_A, M_LWR_OB, M_LWRE_OB, M_LWU_OB)
(M_PREF_OB, M_PREFE_OB, M_S_DOB, M_SAA_OB, M_SAAD_OB, M_SC_OB)
(M_SCD_OB, M_SCE_OB, M_SD_A, M_SD_OB, M_SDC2_OB, M_SDL_OB, M_SDM_OB)
(M_SDP_OB, M_SDR_OB, M_SB_A, M_SBE_OB, M_SH_A, M_SHE_OB, M_SW_A)
(M_SWE_OB, M_SWC0_A, M_SWC1_A, M_SWC2_A, M_SWC2_OB, M_SWC3_A, M_SWL_A)
(M_SWL_OB, M_SWLE_OB, M_SWM_OB, M_SWP_OB, M_SWR_A, M_SWR_OB, M_SWRE_OB)
(M_ULD, M_ULH, M_ULHU, M_ULW, M_USH, M_USW, M_USD): Delete.
(M_ULD_A, M_ULH_A, M_ULHU_A, M_ULW_A, M_USH_A, M_USW_A, M_USD_A):
Rename to...
(M_ULD_AB, M_ULH_AB, M_ULHU_AB, M_ULW_AB, M_USH_AB, M_USW_AB)
(M_USD_AB): ...these.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove o(b) macros. Move LD
and SD A(B) macros up.
* micromips-opc.c (micromips_opcodes): Likewise.
gas/
* config/tc-mips.c (gprel16_reloc_p): New function.
(macro_read_relocs): Assume BFD_RELOC_LO16 if all relocs are
BFD_RELOC_UNUSED.
(offset_high_part, small_offset_p): New functions.
(nacro): Use them. Remove *_OB and *_DOB cases. For single-
register load and store macros, handle the 16-bit offset case first.
If a 16-bit offset is not suitable for the instruction we're
generating, load it into the temporary register using
ADDRESS_ADDI_INSN. Make the M_LI_DD code fall through into the
M_L_DAB code once the address has been constructed. For double load
and store macros, again handle the 16-bit offset case first.
If the second register cannot be accessed from the same high
part as the first, load it into AT using ADDRESS_ADDI_INSN.
Fix the handling of LD in cases where the first register is the
same as the base. Also handle the case where the offset is
not 16 bits and the second register cannot be accessed from the
same high part as the first. For unaligned loads and stores,
fuse the offbits == 12 and old "ab" handling. Apply this handling
whenever the second offset needs a different high part from the first.
Construct the offset using ADDRESS_ADDI_INSN where possible,
for offbits == 16 as well as offbits == 12. Use offset_reloc
when constructing the individual loads and stores.
(mips_ip): Set up imm_expr, imm2_expr, offset_expr, imm_reloc
and offset_reloc before matching against a particular opcode.
Handle elided 'A' constants. Allow 'A' constants to use
relocation operators.
gas/testsuite/
* gas/mips/ldstla-32.d: Avoid "lui at,0x0" sequences for
truncated constants.
* gas/mips/ldstla-32-shared.d: Likewise.
* gas/mips/mcu.d: Use ADDIU in preference to LI+ADDU when adding
16-bit constants to the base.
* gas/mips/micromips@mcu.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips.d, gas/mips/micromips-insn32.d,
gas/mips/micromips-noinsn32.d, gas/mips/micromips-trap.d: Likewise.
Allow the full 16-bit offset range to be used for SB, LB and LBU in
USH and ULH sequences. Fix the expected output for LD and SD when
the two LW and SW offsets need different high parts.
* gas/mips/eva.s: Test PREFE with relocation operators.
* gas/mips/eva.d: Use ADDIU in preference to LI+ADDU for 16-bit
constants. Update after eva.s change.
* gas/mips/micromips@eva.d: Likewise.
* gas/mips/ld-reloc.s, gas/mips/ld-reloc.d, gas/mips/l_d-reloc.s,
gas/mips/l_d-reloc.d, gas/mips/ulw-reloc.s, gas/mips/ulw-reloc.d,
gas/mips/micromips@ulw-reloc.d, gas/mips/ulh-reloc.s,
gas/mips/ulh-reloc.d: New tests.
* gas/mips/mips.exp: Run them.
* mips.h: Remove documentation of "[" and "]". Update documentation
of "k" and the MDMX formats.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
MDMX-like instructions.
* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
printing "Q" operands for INSN_5400 instructions.
gas/
* config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling.
(mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions.
Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions.
gas/testsuite/
* gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test.
* gas/mips/mips.exp: Run it.
Andrew Burgess
Nick Clifton
Jiong Wang
Trevor Saunders
Alan Modra
Renlin Li
H.J. Lu
Claudiu Zissulescu
Michael McConville
Matthew Wahab
Maciej W. Rozycki
Peter Bergner
Andreas Schwab
Thomas Preud'homme
Yoshinori Sato
DJ Delorie
Andre Vieira
Tristan Gingold
Robert Suchanek
Yao Qi
Vinay Kumar
Andreas Krebbel
Dominik Vogt
Tom Rix
jamesbowman
Anton Blanchard
Jose E. Marchesi
Jan Stancek
Alexander Fomin
Andre Vieira
Simon Dardis
Amit Pawar
Alessandro Marzocchi
Sandra Loosemore
Szabolcs Nagy
Jan Beulich
Ilya Tocar
Mike Frysinger
Terry Guo
Ganesh Gopalasubramanian
Andrew Bennett
Oleg Endo
Pedro Alves
Kuan-Lin Chen
Anthony Green
Matthew Fortune
Eric Botcazou
Naveen H.S
Tristan Gingold
Maciej W. Rozycki
Andreas Arnez
Stefan Kristiansson
Barney Stratford
Philippe De Muyter
Joel Brobecker
Christian Svensson
Yufeng Zhang
Richard Sandiford
Michael Zolotukhin
Roland McGrath
Jan-Benedict Glaw
Catherine Moore
Ramana Radhakrishnan
Chao-ying Fu
Sean Keys
Roland McGrath
Saravanan Ekanathan
Andreas Krebbel
Maciej W. Rozycki
Eric Botcazou