In 64-bit mode, double word suffix in mnemonic with word general register
is disallowed. Otherwise, assembler gives a warning:
$ cat /tmp/x.s
movl %ax, %bx
movl %ds, %ax
movl %ax, %cs
$ gcc -c /tmp/x.s
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Error: incorrect register `%bx' used with `l' suffix
/tmp/x.s:2: Error: incorrect register `%ax' used with `l' suffix
/tmp/x.s:3: Error: incorrect register `%ax' used with `l' suffix
$ gcc -c /tmp/x.s -m32
/tmp/x.s: Assembler messages:
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Warning: using `%ebx' instead of `%bx' due to `l' suffix
/tmp/x.s:1: Warning: using `%eax' instead of `%ax' due to `l' suffix
/tmp/x.s:2: Warning: using `%eax' instead of `%ax' due to `l' suffix
/tmp/x.s:3: Warning: using `%eax' instead of `%ax' due to `l' suffix
This patch makes it a hard error in all modes. Now we get:
$ gcc -c /tmp/x.s -m32
/tmp/x.s: Assembler messages:
/tmp/x.s:1: Error: incorrect register `%bx' used with `l' suffix
/tmp/x.s:2: Error: incorrect register `%ax' used with `l' suffix
/tmp/x.s:3: Error: incorrect register `%ax' used with `l' suffix
PR gas/25438
* config/tc-i386.c (check_long_reg): Always disallow double word
suffix in mnemonic with word general register.
* testsuite/gas/i386/general.s: Replace word general register
with double word general register for movl.
* testsuite/gas/i386/inval.s: Add tests for movl with word general
register.
* testsuite/gas/i386/general.l: Updated.
* testsuite/gas/i386/inval.l: Likewise.
There's no need (anymore?) to heavily special case this - just make
generic logic consider only its first operand, and deal with the case
of an 'l' suffix not being allowed in a pattern.
Commit b76bc5d54e ("x86: don't default variable shift count insns to
8-bit operand size") pointed out a very bad case, but the underlying
problem is, as mentioned on various occasions, much larger: Silently
selecting a (nowhere documented afaict) certain default operand size
when there's no "sizing" suffix and no suitable register operand(s) is
simply dangerous (for the programmer to make mistakes).
While in Intel syntax mode such mistakes already lead to an error (which
is going to remain that way), AT&T syntax mode now gains warnings in
such cases by default, which can be suppressed or promoted to an error
if so desired by the programmer. Furthermore at least general purpose
insns now consistently have a default applied (alongside the warning
emission), rather than accepting some and refusing others.
No warnings are (as before) to be generated for "DefaultSize" insns as
well as ones acting on selector and other fixed-width values. For
SYSRET, however, the DefaultSize needs to be dropped - it had been
wrongly put there in the first place, as it's unrelated to .code16gcc
(no stack accesses involved).
As set forth as a prereq when I first mentioned this intended change a
few years back, Linux as well as gcc have meanwhile been patched to
avoid (emission of) ambiguous operands (and hence triggering of the new
warning).
Note that I think that in 64-bit mode IRET and far RET would better get
a diagnostic too, as it's reasonably likely that a suffix-less instance
really is meant to be a 64-bit one. But I guess I better make this a
separate follow-on patch.
Note further that floating point operations with integer operands are an
exception for now: They continue to use short (16-bit) operands by
default even in 32- and 64-bit modes.
Finally note that while {,V}PCMPESTR{I,M} would, strictly speaking, also
need to be diagnosed, with their 64-bit forms not being very useful I
think it is better to continue to avoid warning about them (by way of
them carrying IgnoreSize attributes).
Just like other VCVT*{X,Y} templates do, and to allow the programmer
flexibility (might be relevant in particular when heavily macro-izing
code), the two templates should also have Broadcast set, just like their
X/Y-suffix-less counterparts. This in turn requires them to also have
* Dword set on their memory operands, to cover the logic added to
i386gen by 4a1b91eabb ("x86: Expand Broadcast to 3 bits"),
* RegXMM/RegYMM set on their source operands, to satisfy broadcast
sizing logic in gas itself.
Otherwise ATTSyntax templates wouldn't need such operand size attributes.
While extending the test cases, also add Intel syntax broadcast forms
without explicit size specifiers.
The AVX512DQ patterns lacking a Cpu64 attribute made the memory operand
forms accepted even outside of 64-bit mode, and this even without any
{evex} pseudo-prefix (otherwise one could argue that this is an attempt
to follow one possible, albeit somewhat odd, interpretation of the SDM
wording to this effect).
For consistency between the various involved templates drop the
* (now) unnecessary IgnoreSize attributes
* unnecessary (due to VexW1) Size64 attributes from VEX encoded forms
* redundant (with Reg64) Qword operand attributes
uniformly.
gas/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
relocations when the target is 430X, except when extracting part of an
expression.
(msp430_srcoperand): Adjust comment.
Initialize the expp member of the msp430_operand_s struct as
appropriate.
(msp430_dstoperand): Likewise.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/reloc-lo-430x.d: New test.
* testsuite/gas/msp430/reloc-lo-430x.s: New test.
include/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* opcode/msp430.h (enum msp430_expp_e): New.
(struct msp430_operand_s): Add expp member to struct.
ld/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/reloc-lo-430x.s: New test.
PR 25377
gas * config/tc-z80.c: Add support for half precision, single
precision and double precision floating point values.
* config/tc-z80.h b/gas/config/tc-z80.h: Disable string escapes.
* doc/as.texi: Add new z80 command line options.
* doc/c-z80.texi: Document new z80 command line options.
* testsuite/gas/z80/ez80_pref_dis.s: New test.
* testsuite/gas/z80/ez80_pref_dis.d: New test driver.
* testsuite/gas/z80/z80.exp: Run the new test.
* testsuite/gas/z80/fp_math48.d: Use correct command line option.
* testsuite/gas/z80/fp_zeda32.d: Likewise.
* testsuite/gas/z80/strings.d: Update expected output.
opcodes * z80-dis.c (suffix): Use .db instruction to generate double
prefix.
The signed integer overflow occurred when adding one to target_count
for (i = 0; i < target_count + 1; i++)
but that's the least of the worries here. target_count was long and i
int, leading to the possibility of a loop that never ended.
So to avoid this type of vulnerability, this patch uses what I believe
to be the proper types for arguments of various wasm32 opcodes, rather
than using "long" which may change in size.
gas/
* testsuite/gas/wasm32/allinsn.d: Update expected output.
opcodes/
* wasm32-dis.c (print_insn_wasm32): Localise variables. Store
result of wasm_read_leb128 in a uint64_t and check that bits
are not lost when copying to other locals. Use uint32_t for
most locals. Use PRId64 when printing int64_t.
The disassembler change is such that in default mode we'd disassemble
the insns (for there not ebing any conflicts), but when AMD64 mode was
explicitly requested, we'd show them as "(bad)".
PR 14891
* config/obj-elf.c (obj_elf_section): Fail if the section name is
already defined as a different symbol type.
* testsuite/gas/elf/pr14891.s: New test source file.
* testsuite/gas/elf/pr14891.d: New test driver.
* testsuite/gas/elf/pr14891.s: New test expected error output.
* testsuite/gas/elf/elf.exp: Run the new test.
According to the specification these permit the Q bit to control the
vector length operated on, and hence this bit should not already be set
in the opcode table entries (it rather needs setting dynamically). Note
how the test case output did also not match its input. Besides
correcting the test case also extend it to cover both forms.
PR 25224
bfd * Makefile.am: Add z80-elf target support.
* configure.ac: Likewise.
* targets.c: Likewise.
* config.bfd: Add z80-elf target support and new arches: ez80 and z180.
* elf32-z80.c: New file.
* archures.c: Add new z80 architectures: eZ80 and Z180.
* coffcode.h: Likewise.
* cpu-z80.c: Likewise.
* bfd-in2.h: Likewise plus additional Z80 relocations.
* coff-z80.c: Add new relocations for Z80 target and local label check.
gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support
for assembler code generated by SDCC. Add new relocation types. Add
z80-elf target support.
* config/tc-z80.h: Add z80-elf target support. Enable dollar local
labels. Local labels starts from ".L".
* testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict.
* testsuite/gas/all/fwdexp.s: Likewise.
* testsuite/gas/z80/suffix.d: Fix failure on ELF target.
* testsuite/gas/z80/z80.exp: Add new tests
* testsuite/gas/z80/dollar.d: New file.
* testsuite/gas/z80/dollar.s: New file.
* testsuite/gas/z80/ez80_adl_all.d: New file.
* testsuite/gas/z80/ez80_adl_all.s: New file.
* testsuite/gas/z80/ez80_adl_suf.d: New file.
* testsuite/gas/z80/ez80_isuf.s: New file.
* testsuite/gas/z80/ez80_z80_all.d: New file.
* testsuite/gas/z80/ez80_z80_all.s: New file.
* testsuite/gas/z80/ez80_z80_suf.d: New file.
* testsuite/gas/z80/r800_extra.d: New file.
* testsuite/gas/z80/r800_extra.s: New file.
* testsuite/gas/z80/r800_ii8.d: New file.
* testsuite/gas/z80/r800_z80_doc.d: New file.
* testsuite/gas/z80/z180.d: New file.
* testsuite/gas/z80/z180.s: New file.
* testsuite/gas/z80/z180_z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.d: New file.
* testsuite/gas/z80/z80_doc.s: New file.
* testsuite/gas/z80/z80_ii8.d: New file.
* testsuite/gas/z80/z80_ii8.s: New file.
* testsuite/gas/z80/z80_in_f_c.d: New file.
* testsuite/gas/z80/z80_in_f_c.s: New file.
* testsuite/gas/z80/z80_op_ii_ld.d: New file.
* testsuite/gas/z80/z80_op_ii_ld.s: New file.
* testsuite/gas/z80/z80_out_c_0.d: New file.
* testsuite/gas/z80/z80_out_c_0.s: New file.
* testsuite/gas/z80/z80_reloc.d: New file.
* testsuite/gas/z80/z80_reloc.s: New file.
* testsuite/gas/z80/z80_sli.d: New file.
* testsuite/gas/z80/z80_sli.s: New file.
ld * Makefile.am: Add new target z80-elf
* configure.tgt: Likewise.
* emultempl/z80.em: Add support for eZ80 and Z180 architectures.
* emulparams/elf32z80.sh: New file.
* emultempl/z80elf.em: Likewise.
* testsuite/ld-z80/arch_ez80_adl.d: Likewise.
* testsuite/ld-z80/arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/arch_r800.d: Likewise.
* testsuite/ld-z80/arch_z180.d: Likewise.
* testsuite/ld-z80/arch_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise.
* testsuite/ld-z80/comb_arch_z180.d: Likewise.
* testsuite/ld-z80/labels.s: Likewise.
* testsuite/ld-z80/relocs.s: Likewise.
* testsuite/ld-z80/relocs_b_ez80.d: Likewise.
* testsuite/ld-z80/relocs_b_z80.d: Likewise.
* testsuite/ld-z80/relocs_f_z80.d: Likewise.
* testsuite/ld-z80/z80.exp: Likewise.
opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
There's no reason to not also issue them in Intel syntax mode, and it
can be quite helpful to mention the actual insn (after all there can be
multiple on a single line).
First and foremost REX must come last. Next JumpInterSegment branches
can't possibly have a REX prefix, as they're consistently CpuNo64. And
finally make BND prefix handling in output_branch() consistent with that
of other prefixes in the same function, and make its placement among
prefixes consistent with output_jump() (which, oddly enough, still isn't
the supposedly canonical order specified by the *_PREFIX definitions).
The expectation of x86-64-branch-3 for "call" / "jmp" with an obvious
direct destination to translate to an indirect _far_ branch is plain
wrong. The operand size prefix should have no effect at all on the
interpretation of the operand. The main underlying issue here is that
the Intel64 templates of the direct branches don't include Disp16, yet
various assumptions exist that it would always be there when there's
also Disp32/Disp32S, toggled by the operand size prefix (which is
being ignored by direct branches in Intel64 mode).
Along these lines it was also wrong to base the displacement width
decision solely on the operand size prefix: REX.W cancels this effect
and hence needs taking into consideration, too.
A disassembler change is needed here as well: XBEGIN was wrongly treated
the same as direct CALL/JMP, which isn't the case - the operand size
prefix does affect displacement size there, it's merely ignored when it
comes to updating [ER]IP.
In memory operand addressing, which forms of displacement are permitted
besides Disp8 is pretty clearly limited
- outside of 64-bit mode, Disp16 or Disp32 only, depending on address
size (MPX being special in not allowing Disp16),
- in 64-bit mode, Disp32s or Disp64 without address size override, and
solely Disp32 with one.
Adjust assembler and i386-gen to match this, observing that templates
already get adjusted before trying to match them against input depending
on the presence of an address size prefix.
This adjustment logic gets extended to all cases, as certain DispNN
values should also be dropped when there's no such prefix. In fact
behavior of the assembler, perhaps besides the exact diagnostics wording,
should not differ between there being templates applicable to 64-bit and
non-64-bit at the same time, or there being fully separate sets of
templates, with their DispNN settings already reduced accordingly.
This adjustment logic further gets guarded such that there wouldn't be
and Disp<N> conversion based on address size prefix when this prefix
doesn't control the width of the displacement (on branches other than
absolute ones).
These adjustments then also allow folding two MOV templates, which had
been split between 64-bit and non-64-bits variants so far.
Once in this area also
- drop the bogus DispNN from JumpByte templates, leaving just the
correct Disp8 there (compensated by i386_finalize_displacement()
now setting Disp8 on their operands),
- add the missing Disp32S to XBEGIN.
Note that the changes make it necessary to temporarily mark a test as
XFAIL; this will get taken care of by a subsequent patch. The failing
parts are entirely bogus and will get replaced.
Similar to SP, BP, SI and DI registers, R12-R15 registers must use REX
prefix for the low byte register when optimizing
test $imm7, %r64/%r32/%r16 -> test $imm7, %r8
PR gas/25274
* config/tc-i386.c (optimize_encoding): Also check R12-R15
registers for "test $imm7, %r64/%r32/%r16 -> test $imm7, %r8"
optimization.
* testsuite/gas/i386/x86-64-optimize-3.s: Add tests for test
with r12.
* testsuite/gas/i386/x86-64-optimize-3.d: Updated.
* testsuite/gas/i386/x86-64-optimize-3b.d: Likewise.
In ("x86: extend SSE check to PCLMULQDQ, AES, and GFNI insns") I went
both a little too far and not quite far enough:
- GFNI insns also have AVX512 variants, which also shouldn't get
diagnosed,
- SSE4a insns should get diagnosed just like SSE4.x ones,
- SHA insns should get diagnosed just like PCLMULQDQ or AES ones.
This patch fixes .arch_extension behaviour.
Currently, context table for '.arch_extension' is only set while
"-march" processing, but it is not set while .arch processing,
so following code is rejected
.syntax unified
.thumb
.arch armv8.1-m.main
.arch_extension mve.fp
unless -march=armv8.1-m.main is given.
Committing on behalf of Vladimir Murzin
gas/ChangeLog:
2019-12-10 Vladimir Murzin <vladimir.murzin@arm.com>
* config/tc-arm.c (s_arm_arch): Set selected_ctx_ext_table.
* testsuite/gas/arm/mve-arch-ext.s: New.
* testsuite/gas/arm/mve-arch-ext.d: New.
This is an alias of "qword ptr", commonly used with MMX insns.
At this occasion also test (alongside the newly supported "mmword")
- "zmmword" used as expression,
- PADDB with "oword ptr" (aliasing "xmmword ptr").
Commit dc2be329b9 ("i386: Only check suffix in instruction mnemonic")
broke rejecting of these for floating point insns. Fix this by setting
the "byte" operand attribute, which will now (again) cause an error.
Furthermore the diagnostic for the "far ptr" case in general and for the
"near ptr" case in the non-float cases became "invalid instruction
suffix" instead of the intended "operand size mismatch". Fix this by
also setting the "tbyte" operand attribute (no insn template accepts
both byte and tbyte operands).
The new pac_negate_ra_state test adds yet another failure on aarch64
ipl32 targets. This patch fixes that particular problem and a few
more that are trivial to fix.
* testsuite/gas/aarch64/bfloat16.d: Match 32-bit and 64-bit output.
* testsuite/gas/aarch64/dgh.d: Likewise.
* testsuite/gas/aarch64/f32mm.d: Likewise.
* testsuite/gas/aarch64/f64mm.d: Likewise.
* testsuite/gas/aarch64/i8mm.d: Likewise.
* testsuite/gas/aarch64/pac_ab_key.d: Likewise.
* testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise.
* testsuite/gas/aarch64/reloc-prel_g0.d: Likewise.
* testsuite/gas/aarch64/reloc-prel_g0_nc.d: Likewise.
* testsuite/gas/aarch64/reloc-prel_g1.d: Likewise.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: Likewise.
* testsuite/gas/aarch64/sve-movprfx-mm.d: Likewise.
* testsuite/gas/aarch64/sve2.d: Likewise.
This patch implements the .cfi_negate_ra_state to be consistent with
LLVM (https://reviews.llvm.org/D50136). The relevant DWARF code DW_CFA_AARCH64_negate_ra_state
is multiplexed on top of DW_CFA_GNU_window_save, as per
https://gcc.gnu.org/ml/gcc-patches/2017-08/msg00753.html
I believe this is the simplest patch implementing this and is needed to
allow users to build, for example, the Linux kernel with Armv8.3-A
pointer authentication support with Clang while using gas as the
assembler, which is a common usecase.
gas/
2019-12-06 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* dw2gencfi.c (cfi_pseudo_table): Add cfi_negate_ra_state.
* testsuite/gas/aarch64/pac_negate_ra_state.s: New file.
* testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise.
SHA2 is a prereq to SHA3, not part of it aiui. Hence disabling the
latter should not also disable the former.
In the course of adding respective tests also do away with the
duplication of crypto.d's contents in crypto-directive.d.
Since we accept these without suffix / operand size specifier, we should
also do so with one. (The fact that we unilaterally accept these, other
than far branches, rather than limiting them to Intel64 mode, will be
taken care of later on.)
Also take the opportunity and make sure "lfs <reg>, tbyte ptr <mem>"
et al get rejected outside of 64-bit mode. This became broken by
dc2be329b9 ("i386: Only check suffix in instruction mnemonic").
Furthermore cover lgdt et al in the Intel syntax handling as well, which
continued to work after said commit just by coincidence.
While dc2be329b9 ("i386: Only check suffix in instruction mnemonic")
has made the assembler accept these in the first place (they were wrongly
rejected before), the generated code was still wrong in that it lacked
an operand size override. (In 64-bit code, other than in 16- and 32-bit
ones, CALL and JMP with memory operands are all entirely unambiguous: No
operand size can have two meanings.)
Test also memory operands with operand size specifier, which was broken
prior to dc2be329b9 ("i386: Only check suffix in instruction
mnemonic"), due to the template not permitting any suffixes. Note that
this uncovered a disassembler issue, which is being fixed here as well.
While segment registers are registers, their use doesn't allow sizing
of insns without suffix / explicit operand size specifier. Prevent
PUSH and POP of segment registers from entering that path, instead
allowing them to observe the stackop_size setting just like other
PUSH/POP and alike do.
Insns permitting only GPR operands (and hence implicit sizing when
there's no suffix) don't ever have their DefaultSize attribute
inspected, so it shouldn't be there in the first place.
Additionally XBEGIN is like JMP, not CALL, and hence shouldn't be
converted to 32-bit operand size in .code16gcc mode. While the same is
true for SYSRET, it permitting more than one suffix makes it FLDENV-
like, and hence rather than dropping the attribute, for now add it to
the exclusion list to avoid it getting an operand size prefix emitted
in .code16gcc mode. (This will be dealt with later, perhaps together
with FLDENV and friends.)
The flag controlling the default DWARF CIE version to produce now
starts with the value -1. This can be modified with the command line
flag as before, but after command line flag processing, in
md_after_parse_args targets can, if the global still has the value -1,
override this value. This gives a target specific default.
If a CIE version is not select either by command line flag, or a
target specific default, then some new code in dwarf2_init now select
a global default. This remains as version 1 to match previous
behaviour.
This RISC-V has a target specific default of version provided, this
make the return column uleb128, which means we can use all DWARF
registers include CSRs.
I chose to switch to version 3 rather than version 4 as this is most
similar to the global default (version 1). Switching to version 4
adds additional columns to the CIE header.
gas/ChangeLog:
* as.c (flag_dwarf_cie_version): Change initial value to -1, and
update comment.
* config/tc-riscv.c (riscv_after_parse_args): Set
flag_dwarf_cie_version if it has not already been set.
* dwarf2dbg.c (dwarf2_init): Initialise flag_dwarf_cie_version if
needed.
* testsuite/gas/riscv/default-cie-version.d: New file.
* testsuite/gas/riscv/default-cie-version.s: New file.
ld/ChangeLog:
* testsuite/ld-elf/eh5.d: Accept version 3 DWARF CIE.
Change-Id: Ibbfe8f0979fba480bf0a359978b09d2b3055555e
In version 1 of DWARF CIE format, the return register column is just a
single byte. For targets with large numbers of DWARF registers, any
use of a register with a high number for the return column
will (currently) silently overflow giving incorrect DWARF.
This commit adds an error when the overflow occurs.
gas/ChangeLog:
* dw2gencfi.c (output_cie): Error on return column overflow.
* testsuite/gas/riscv/cie-rtn-col-1.d: New file.
* testsuite/gas/riscv/cie-rtn-col-3.d: New file.
* testsuite/gas/riscv/cie-rtn-col.s: New file.
Change-Id: I1809f739ba7771737ec012807f0260e1a3ed5e64
This commit gives DWARF register numbers to the RISC-V CSRs inline
with the RISC-V ELF specification here:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
The CSRs are defined being numbered from 4096 to 8191.
This adds support to the assembler, required in order to reference
CSRs in, for example .cfi directives.
I have then extended dwarf.c in order to support printing CSR names in
the dumped DWARF output. As the CSR name space is quite large and
only sparsely populated, I have provided a new function to perform
RISC-V DWARF register name lookup which uses a switch statement rather
than the table base approach that other architectures use.
Any CSR that does not have a known name will return a name based on
'csr%d' with the %d being replaced by the offset of the CSR from 4096.
gas/ChangeLog:
* config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Lookup CSR
names too.
* testsuite/gas/riscv/csr-dw-regnums.d: New file.
* testsuite/gas/riscv/csr-dw-regnums.s: New file.
binutils/ChangeLog:
* dwarf.c (regname_internal_riscv): New function.
(init_dwarf_regnames_riscv): Use new function.
Change-Id: I3f70bc24fa8b3c75744e6775eeeb87db70c7ecfb
psb CYSNC was not finding that CSYNC was a correct spelling.
The problem was upper case version was being put in the
wrong hashtable. This fixes the problem by using the
correct hashtable.
Also adds testcases for the upper case versions.
* config/tc-aarch64.c (md_begin): Use correct
hash table for uppercase version of hint.
* testsuite/gas/aarch64/system-2.s: Extend psb case to uppercase.
* testsuite/gas/aarch64/system-2.d: Update.
Change-Id: If43f8b85cacd24840d596c3092b0345e5f212766
This patch changes the CRC extension to use the core feature bits instead
of the coproc/fpu feature bits.
CRC is not an fpu feature and it causes issues with the new fpu reset
patch (f439988037). CRC can be set using
the '.arch_extension' directive, which sets bits in the coproc bitfield. When
a '.fpu' directive is encountered, the CRC feature bit gets removed and
there is no way to set it back using '.fpu'.
With this patch, CRC will be marked in the feature core bits, which prevents
it from getting removed when setting/changing the fpu options.
gas/ChangeLog:
* config/tc-arm.c (arm_ext_crc): New.
(crc_ext_armv8): Remove.
(insns): Rename crc_ext_armv8 to arm_ext_crc.
(arm_cpus): Replace CRC_EXT_ARMV8 with ARM_EXT2_CRC.
(armv8a_ext_table, armv8r_ext_table,
arm_option_extension_value_table): Redefine the crc
extension in terms of ARM_EXT2_CRC.
* gas/testsuite/gas/arm/crc-ext.s: New.
* gas/testsuite/gas/arm/crc-ext.d: New.
include/ChangeLog:
* opcode/arm.h (ARM_EXT2_CRC): New extension feature
to replace CRC_EXT_ARMV8.
(CRC_EXT_ARMV8): Remove and mark bit as unused.
(ARM_ARCH_V8A_CRC, ARM_ARCH_V8_1A, ARM_ARCH_V8_2A,
ARM_ARCH_V8_3A, ARM_ARCH_V8_4A, ARM_ARCH_V8_5A,
ARM_ARCH_V8_6A): Redefine using ARM_EXT2_CRC instead of
CRC_EXT_ARMV8.
opcodes/ChangeLog:
* opcodes/arm-dis.c (arm_opcodes, thumb32_opcodes):
Change the coproc CRC conditions to use the extension
feature set, second word, base on ARM_EXT2_CRC.
Add a flag to control the version of CIE that is generated. By
default gas produces CIE version 1, and this continues to be the
default after this patch.
However, a user can now provide --gdwarf-cie-version=NUMBER to switch
to either version 3 or version 4 of CIE, version 2 was never released,
and so causes an error as does any number less than 1 or greater than
4.
Producing version 4 CIE requires two new fields to be added to the
CIE, an address size field, and an segment selector field. For a flat
address space the DWARF specification indicates that the segment
selector should be 0, and the address size fields just contains the
address size in bytes. For now we support 4 or 8 byte addresses, and
the segment selector is always produced as 0. At some future time we
might need to allow targets to override this.
gas/ChangeLog:
* as.c (parse_args): Parse --gdwarf-cie-version option.
(flag_dwarf_cie_version): New variable.
* as.h (flag_dwarf_cie_version): Declare.
* dw2gencfi.c (output_cie): Switch from DW_CIE_VERSION to
flag_dwarf_cie_version.
* doc/as.texi (Overview): Document --gdwarf-cie-version.
* NEWS: Likewise.
* testsuite/gas/cfi/cfi.exp: Add new tests.
* testsuite/gas/cfi/cie-version-0.d: New file.
* testsuite/gas/cfi/cie-version-1.d: New file.
* testsuite/gas/cfi/cie-version-2.d: New file.
* testsuite/gas/cfi/cie-version-3.d: New file.
* testsuite/gas/cfi/cie-version-4.d: New file.
* testsuite/gas/cfi/cie-version.s: New file.
include/ChangeLog:
* dwarf2.h (DW_CIE_VERSION): Delete.
Change-Id: I9de19461aeb8332b5a57bbfe802953d0725a7ae8
The CMPS test case derivation from their MOVS counterparts I did in
d241b91073 ("x86/Intel: correct MOVSD and CMPSD handling") ended up
with misplaced closing parentheses in som regexps. Correct this.
We have to enable the f extension through -march or ELF attribute if we use the
FPR in .insn directive. The behavior is same as the riscv_opcodes.
2019-11-12 Nelson Chu <nelson.chu@sifive.com>
opcodes/
* riscv-opc.c (riscv_insn_types): Replace the INSN_CLASS_I with
INSN_CLASS_F and the INSN_CLASS_C with INSN_CLASS_F_AND_C if we
use the floating point register (FPR).
gas/
* testsuite/gas/riscv/insn.d: Add the f extension to -march option.
Change-Id: I4f59d04c82673ef84c56ecd2659ad8ce164dd626
This patch enables a few instructions for Armv8.1-M MVE. Currently VLDM,
VSTM, VSTR, VLDR, VPUSH and VPOP are enabled only when the Armv8-M
Floating-point Extension is enabled. According to the ARMv8.1-M ARM,
section A.1.4.2[1], they can be enabled by having "Armv8-M Floating-point
Extension and/or Armv8.1-M MVE".
[1]https://developer.arm.com/docs/ddi0553/bh/armv81-m-architecture-reference-manual
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (do_vfp_nsyn_push): Move in order to enable it for
both fpu_vfp_ext_v1xd and mve_ext and add call to the aliased vstm
instruction for mve_ext.
(do_vfp_nsyn_pop): Move in order to enable it for both
fpu_vfp_ext_v1xd and mve_ext and add call to the aliased vldm
instruction for mve_ext.
(do_neon_ldm_stm): Add fpu_vfp_ext_v1 and mve_ext checks.
(insns): Enable vldm, vldmia, vldmdb, vstm, vstmia, vstmdb, vpop,
vpush, and fldd, fstd, flds, fsts for arm_ext_v6t2 instead
of fpu_vfp_ext_v1xd.
* testsuite/gas/arm/v8_1m-mve.s: New.
* testsuite/gas/arm/v8_1m-mve.d: New.
This patch updates the decoding of the VMOV and VMVN instructions which depend on cmode.
Previously VMOV and VMVN with cmode 1101 were not allowed.
The cmode changes also required updating of the MVE conflict checking.
Now instructions with opcodes 0xef800d50 and 0xef800e70 correctly get decoded as VMOV
and VMVN, respectively.
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/arm-dis.c (mve_opcodes): Enable VMOV imm to vec with
cmode 1101.
(is_mve_encoding_conflict): Update cmode conflict checks for
MVE_VMVN_IMM.
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* gas/config/tc-arm.c (do_neon_mvn): Allow mve_ext cmode=0xd.
* testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.s: New test.
* testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.d: Likewise.
Drop the remaining instances left in place by commit c3949f432f ("x86:
limit ImmExt abuse), now that we have a way to specify specific GPRs.
Take the opportunity and also introduce proper 16-bit forms of
applicable SVME insns as well as 1-operand forms of CLZERO.
We should check suffix in instruction mnemonic when matching instruction.
In Intel syntax, normally we check for memory operand size. But the same
mnemonic with 2 different encodings can have the same memory operand
size and i.suffix is set to LONG_DOUBLE_MNEM_SUFFIX from memory operand
size in Intel syntax to distinguish them. When there is no suffix in
mnemonic, we check LONG_DOUBLE_MNEM_SUFFIX in i.suffix for mnemonic
suffix.
gas/
PR gas/25167
* config/tc-i386.c (match_template): Don't check instruction
suffix set from operand.
* testsuite/gas/i386/code16.d: New file.
* testsuite/gas/i386/code16.s: Likewise.
* testsuite/gas/i386/i386.exp: Run code16.
* testsuite/gas/i386/x86-64-branch-4.l: Updated.
opcodes/
PR gas/25167
* i386-opc.tbl: Remove IgnoreSize from cmpsd and movsd.
* i386-tbl.h: Regenerated.
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
In this last patch, the new Data Gathering Hint mnemonic is introduced.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* testsuite/gas/aarch64/dgh.s: New test.
* testsuite/gas/aarch64/dgh.d: New test.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/aarch64-tbl.h (V8_6_INSN): New macro for v8.6 instructions.
(aarch64_opcode_table): Add data gathering hint mnemonic.
* opcodes/aarch64-dis-2.c: Account for new instruction.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the arm backend.
The following Matrix Multiply instructions are added: vummla, vsmmla,
vusmmla, vusdot, vsudot[1].
[1]https://developer.arm.com/docs/ddi0597/latest/simd-and-floating-point-instructions-alphabetic-order
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (arm_ext_i8mm): New feature set.
(do_vusdot): New.
(do_vsudot): New.
(do_vsmmla): New.
(do_vummla): New.
(insns): Add vsmmla, vummla, vusmmla, vusdot, vsudot mnemonics.
(armv86a_ext_table): Add i8mm extension.
(arm_extensions): Move bf16 extension to context sensitive table.
(armv82a_ext_table, armv84a_ext_table, armv85a_ext_table):
Move bf16 extension to context sensitive table.
(armv86a_ext_table): Add i8mm extension.
* doc/c-arm.texi: Document i8mm extension.
* testsuite/gas/arm/i8mm.s: New test.
* testsuite/gas/arm/i8mm.d: New test.
* testsuite/gas/arm/bfloat17-cmdline-bad-3.d: Update test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/arm.h (ARM_EXT2_I8MM): New feature macro.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* arm-dis.c (neon_opcodes): Add i8mm SIMD instructions.
Regression tested on arm-none-eabi.
Is this ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat' directive for the AArch64 backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function in order
to encode the slightly
different bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on aarch64-none-elf and aarch64-none-linux-gnu
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-29 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-29 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-aarch64.c (md_atof): Add encoding for the bfloat16 format.
* testsuite/gas/aarch64/bfloat16-directive-le.d: New test.
* testsuite/gas/aarch64/bfloat16-directive-be.d: New test.
* testsuite/gas/aarch64/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat16' directive for the Arm backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function (included
in the previous patch) in order to encode the slightly different
bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on arm-none-eabi and arm-none-linux-gnueabihf
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-arm.c (md_atof): Add encoding for bfloat16
* testsuite/gas/arm/bfloat16-directive-le.d: New test.
* testsuite/gas/arm/bfloat16-directive-be.d: New test.
* testsuite/gas/arm/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces BFloat16 instructions to the arm backend.
The following BFloat16 instructions are added: vdot, vfma{l/t},
vmmla, vfmal{t/b}, vcvt, vcvt{t/b}.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_archs): Add armv8.6-a option.
(cpu_arch_ver): Add TAG_CPU_ARCH_V8 tag for Armv8.6-a.
* doc/c-arm.texi (-march): New armv8.6-a arch.
* config/tc-arm.c (arm_ext_bf16): New feature set.
(enum neon_el_type): Add NT_bfloat value.
(B_MNEM_vfmat, B_MNEM_vfmab): New bfloat16 encoder
helpers.
(BAD_BF16): New message.
(parse_neon_type): Add bf16 type specifier.
(enum neon_type_mask): Add N_BF16 type.
(type_chk_of_el_type): Account for NT_bfloat.
(el_type_of_type_chk): Account for N_BF16.
(neon_three_args): Split out from neon_three_same.
(neon_three_same): Part split out into neon_three_args.
(CVT_FLAVOUR_VAR): Add bf16_f32 cvt flavour.
(do_neon_cvt_1): Account for vcvt.bf16.f32.
(do_bfloat_vmla): New.
(do_mve_vfma): New function to deal with the mnemonic clash between the BF16
vfmat and the MVE vfma in a VPT block with a 't'rue condition.
(do_neon_cvttb_1): Account for vcvt{t,b}.bf16.f32.
(do_vdot): New
(do_vmmla): New
(insns): Add vdot and vmmla mnemonics.
(arm_extensions): Add "bf16" extension.
* doc/c-arm.texi: Document "bf16" extension.
* testsuite/gas/arm/attr-march-armv8_6-a.d: New test.
* testsuite/gas/arm/bfloat16-bad.d: New test.
* testsuite/gas/arm/bfloat16-bad.l: New test.
* testsuite/gas/arm/bfloat16-bad.s: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-2.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-3.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad.d: New test.
* testsuite/gas/arm/bfloat16-neon.s: New test.
* testsuite/gas/arm/bfloat16-non-neon.s: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.d: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.l: New test.
* testsuite/gas/arm/bfloat16-thumb.d: New test.
* testsuite/gas/arm/bfloat16-vfp.d: New test.
* testsuite/gas/arm/bfloat16.d: New test.
* testsuite/gas/arm/bfloat16.s: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_V8_6A, ARM_AEXT2_V8_6A,
ARM_ARCH_V8_6A): New.
* opcode/arm.h (ARM_EXT2_BF16): New feature macro.
(ARM_AEXT2_V8_6A): Include above macro in definition.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (select_arm_features): Update bfd_march_arm_8 with
Armv8.6-A.
(coprocessor_opcodes): Add bfloat16 vcvt{t,b}.
(neon_opcodes): Add bfloat SIMD instructions.
(print_insn_coprocessor): Add new control character %b to print
condition code without checking cp_num.
(print_insn_neon): Account for BFloat16 instructions that have no
special top-byte handling.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
As the comments (here: almost, in the opcode table: fully) correctly
state - all register operands except MONITOR's address one are fixed
at 32 bit size. Don't print 64-bit registers there.
Also adjust x86-64-suffix.d's name such that it wouldn't be identical to
x86-64-rep-suffix.d's, but instead resemble that of its sibling
x86-64-suffix-intel.d.
If the extension is not found in the context sensitive table, the legacy
tables are still checked as a fallback. This is particularly useful for
Armv8.1-M as it enables the use of '.arch_extension' with the 'mve' and
'mve.fp' extensions which are not part of the legacy table.
* config/tc-arm.c (selected_ctx_ext_table) New static variable.
(arm_parse_arch): Set context sensitive extension table based on the
chosen base architecture.
(s_arm_arch_extension): Change to lookup extensions in the new context
sensitive tables.
* gas/testsuite/gas/arm/mve-ext.s: New.
* gas/testsuite/gas/arm/mve-ext.d: New.
* gas/testsuite/gas/arm/mvefp-ext.s: New.
* gas/testsuite/gas/arm/mvefp-ext.d: New.
This is a shorthand for the immediate argument being 0, as described here:
https://developer.arm.com/docs/ddi0596/latest/base-instructions-alphabetic-order/ldraa-ldrab-load-register-with-pointer-authentication
This is because the instructions still have a use with an immediate
argument of 0, unlike loads without the PAC functionality. Currently,
the mnemonics are
LDRAA Xt, [Xn, #<simm10>]!
LDRAB Xt, [Xn, #<simm10>]!
After this patch they become
LDRAA Xt, [Xn {, #<simm10>}]!
LDRAB Xt, [Xn {, #<simm10>}]!
gas * config/tc-aarch64.c (parse_address_main): Accept the omission of
the immediate argument for ldraa and ldrab as a shorthand for the
immediate being 0.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.d: New test.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.s: New test.
* testsuite/gas/aarch64/illegal-ldraa.s: Modified to accept the
writeback form with no offset.
* testsuite/gas/aarch64/illegal-ldraa.s: Removed missing offset
error.
opcodes * aarch64-opc.c (print_immediate_offset_address): Don't print the
immediate for the writeback form of ldraa/ldrab if it is 0.
* aarch64-tbl.h: Updated the documentation for ADDR_SIMM10.
* aarch64-opc-2.c: Regenerated.
Prior to changing the logic in the assembler install tests to make sure
the present defaulting of operand sizes won't get broken. There are a
few anomalies pointed out by this:
- arithmetic insns (add, sub, etc) allow defaulting when their immediate
fits in (signed) 8 bits, but they fail to assemble with larger values,
- mov, other than arithmetic insns, doesn't allow any defaulting,
- movsx/movzx default to byte sources (in AT&T mode), and their special
casing needs to be adjusted first
- bt and friends allow defaulting, while shl and friends don't,
- ambiguous AVX and AVX512 insns don't allow defaulting.
This should ultimately all become consistent (perhaps with the exception
some of the SIMD insns); respective tests will be added to the test
cases here as the issues get addressed.
PR 25041
opcodes * avr-dis.c (avr_operand): Fix construction of address for lds/sts
instructions.
gas * testsuite/gas/avr/pr25041.s: New test.
* testsuite/gas/avr/pr25041.d: New test driver.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
First and foremost the EsSeg attribute was misplaced for CMPSD. Then
both it and MOVSD were lacking Dword on both of their operands.
Finally string insns with multiple operands and requiring use of ES:
had the wrong operand number reported in the diagnostic.
The fix for PR12848 introduced an off by one error in the mask, this corrected
the negative overflows but not the positive overflows. As a result the
conditional branch instructions accepted a too wide positive immediate which
resulted in it corrupting the instruction during encoding.
The relocation I believe has been incorrectly named, to be consistent with the
other relocations it should have been named BRANCH21 which is why the masks for
it are confusing.
I've replaced the masks with a function out_of_range_p which should make it
harder to make such mistakes.
The mask for BL/BLX on Armv6t+ is also wrong, the extended range is 25-bits
and so the mask should be checking for 24-bits for positive overflow.
gas/ChangeLog:
PR gas/24991
* config/tc-arm.c (out_of_range_p): New.
(md_apply_fix): Use it in BFD_RELOC_THUMB_PCREL_BRANCH9,
BFD_RELOC_THUMB_PCREL_BRANCH12, BFD_RELOC_THUMB_PCREL_BRANCH20,
BFD_RELOC_THUMB_PCREL_BRANCH23, BFD_RELOC_THUMB_PCREL_BRANCH25
* testsuite/gas/arm/pr24991.d: New test.
* testsuite/gas/arm/pr24991.l: New test.
* testsuite/gas/arm/pr24991.s: New test.
This patch modifies assembler to accept the equivalent sized floating
and signless datatypes for VLDR instruction but as alias for the unsigned version.
gas/ChangeLog:
2019-09-23 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (do_mve_vstr_vldr_RQ): Modify function to allow float
* and signless datatypes for few cases of VLDR instruction.
* testsuite/gas/arm/mve-vldr-bad-3.l: Modify.
* testsuite/gas/arm/mve-vldr-bad-3.s: Likewise.
* testsuite/gas/arm/mve-vstrldr-1.d: Likewise.
* testsuite/gas/arm/mve-vstrldr-1.s: Likewise.
Commit 21df382b91 ("x86: fold SReg{2,3}") went too far: Folding 64-bit
PUSH/POP templates into non-64-bit ones isn't correct, due to the
different operand widths, and hence suffixes permitted. Restore the
separate templates.
Add tests of PUSH/POP with q suffix and %fs/%gs operands to the
testsuite. While doing so also add PUSHF/POPF ones _without_ suffix.
This patch adds support for MVE VCTP instruction in assembler.
gas ChangeLog:
2019-09-10 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (M_MNEM_vctp): Add new Mnemonic.
(do_mve_vctp): Add function to encode VCTP instruction.
* testsuite/gas/arm/mve-vctp-bad.d: New test.
* testsuite/gas/arm/mve-vctp-bad.l: Likewise.
* testsuite/gas/arm/mve-vctp-bad.s: Likewise.
* testsuite/gas/arm/mve-vctp.d: Likewise.
* testsuite/gas/arm/mve-vctp.s: Likewise.
This patch make changes to the assembler to encode MVE VMOV instruction "a" same as "b".
a: VMOV<c><q> <Dd>, <Dm>
b: VMOV<c><q>.F64 <Dd>, <Dm>
gas/ChangeLog:
2019-08-30 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (do_neon_mov): Modify "if" statement.
* testsuite/gas/arm/mve-vmov-bad-3.d: New test.
* testsuite/gas/arm/mve-vmov-bad-3.l: Likewise.
* testsuite/gas/arm/mve-vmov-bad-3.s: Likewise.
gas * config/tc-arm.c (parse_neon_mov): Add check to accept vector
register to both the arguments in VMOV instruction.
* testsuite/gas/arm/mve-vmov-1.d: Modify.
* testsuite/gas/arm/mve-vmov-1.s: Likewise.
* testsuite/gas/arm/mve-vorr.d: Likewise.
opcodes * arm-dis.c (mve_opcodes): Add entry for MVE_VMOV_VEC_TO_VEC.
(is_mve_undefined): Add case for MVE_VMOV_VEC_TO_VEC.
(print_insn_mve): Add condition to check Qm==Qn of VORR instruction.
li is a pseudo instruction in RISC-V, it might expand to more than one
instructions if the immediate value can't fit addi or lui, but the
assembler will always using 4-byte instructions during expansion.
For example:
li a0, 0x12345001
will expand into
12345537 lui a0,0x12345
00150513 addi a0,a0,1
but addi could be compress into
0505 addi a0,a0,1
It because load_const use macro_build to emit instructions,
and macro_build call append_insn, and expect it will compress
it if possible, but the fact is append_insn never compress anything,
So this patch redirect the li expansion flow to normal instruction
emission flow via md_assemble, added md_assemblef as an wrapper for
that for easier emit instruction with printf-style argument to build
instruction.
gas/ChangeLog:
* tc-riscv.c (md_assemblef): New.
(load_const) Use md_assemblef instead of macro_build to emit
instructions.
* testsuite/gas/riscv/li32.d: New.
* testsuite/gas/riscv/li32.s: Ditto.
* testsuite/gas/riscv/li64.d: Ditto.
* testsuite/gas/riscv/li64.s: Ditto.
This patch adds support for following CPUs:
Cortex-M35P, Cortex-A77, Cortex-A76AE.
Related specifications can be found at https://developer.arm.com/ip-products/processors.
gas/ChangeLog:
* config/tc-arm.c: New entries for Cortex-M35P, Cortex-A77,
and Cortex-A76AE.
* doc/c-arm.texi: Document new processors.
* testsuite/gas/arm/cpu-cortex-a76ae.d: New test.
* testsuite/gas/arm/cpu-cortex-a77.d: New test.
* testsuite/gas/arm/cpu-cortex-m35p.d: New test.
bfd/ChangeLog:
* cpu-arm.c: New entries for Cortex-M35P, Cortex-A77, Cortex-A76AE.
* atof-generic.c (atof_generic): Do not ignore leading zeros if
they appear after a decimal point.
* testsuite/gas/all/float.s: Extend test to include a number with
a leading decimal point followed by several zeroes.
* testsuite/gas/i386/fp.s: Likewise.
* testsuite/gas/i386/fp.d: Update expected output.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 0.5
.float16 10.2, NaN, 452.09
The floats will always be encoded using the binary16 format as described in the
IEEE 754-2008 standard. There is no need to support Arm's alternative half-precision
format since AArch64 only supports the IEEE format.
gas * config/tc-aarch64.c: Add float16 directive and add "Hh" to
acceptable float characters.
* doc/c-aarch64.texi: Documentation for float16 directive.
* testsuite/gas/aarch64/float16-be.d: New test.
* testsuite/gas/aarch64/float16-le.d: New test.
* testsuite/gas/aarch64/float16.s: New test.
* NEWS: Add NEWS entry.
Related specifications can be found at
https://developer.arm.com/ip-products/processors.
gas * NEWS: Mention the Arm and AArch64 new processors.
* config/tc-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
* doc/c-aarch64.texi: Document new CPUs.
* testsuite/gas/aarch64/cpu-cortex-a34.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a76ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a77.d: New test.
* testsuite/gas/aarch64/nop-asm.s: New test.
bfd * cpu-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
gas/
* config/tc-mips.c (mips_move_labels): Retain ISA mode bit
when moving labels in text segments.
(mips_align): Indicate text mode when aligning labels in
text segments.
* gas/testsuite/gas/mips/insn-isa-mode.d: New test.
* gas/testsuite/gas/mips/insn-isa-mode.s: New test source.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
This is a change to the first published specifications [1][a] but since there is no hardware
out there that uses the old instructions we do not want to support the old variant.
This changes are done based on the latest published specifications [1][b].
[1] https://developer.arm.com/architectures/cpu-architecture/m-profile/docs/ddi0553/latest/armv81-m-architecture-reference-manual
[a] version bf
[b] version bh
gas * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64.
(po_imm1_or_imm2_or_fail): Marco to check the immediate is either of
48 or 64.
(parse_operands): Add case OP_I48_I64.
(do_mve_scalar_shift1): Add function to encode the MVE shift
instructions with 4 arguments.
* testsuite/gas/arm/mve-shift-bad.l: Modify.
* testsuite/gas/arm/mve-shift-bad.s: Likewise.
* testsuite/gas/arm/mve-shift.d: Likewise.
* testsuite/gas/arm/mve-shift.s: Likewise.
opcodes * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for
cases MVE_SQRSHRL and MVE_UQRSHLL.
(print_insn_mve): Add case for specifier 'k' to check
specific bit of the instruction.
Half precision floating point numbers will be encoded using the IEEE 754
half precision floating point format - 16 bits in total, 1 for sign, 5
for exponent and 10 bits of mantissa.
This patch implements the float16 directive for both the IEEE 754 format
and the Arm alternative format for the Arm backend.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 12.0
.float16 0.23, 433.1, 0.06
The Arm alternative format is almost identical to the IEEE 754 format,
except that it doesn't encode for NaNs or Infinity (instead an exponent
of 0x1F represents a normalized number in the range 65536 to 131008).
The alternative format is documented in the reference manual:
https://static.docs.arm.com/ddi0487/db/DDI0487D_b_armv8_arm.pdf?_ga=2.72318806.49764181.1561632697-999473562.1560847439
Which format is used is controlled by the .float16_format <format>
directive, where if <format> = ieee, then use the IEEE 754
half-precision format else if <format> = alternative, then use the
Arm alternative format
Or the format can be set on the command line via the -mfp16-format
option that has a similar syntax. -mfp16-format=<ieee|alternative>.
This also fixes the format and it cannot be changed by any directives.
Once the format has been set (either by the command line option or a directive) it cannot be changed,
and any attempts to change it (i.e. with the float16_format directive) will result in a warning and the
line being ignored.
For ELF targets the appropriate EABI attribute will be written out at the end of assembling
if the format has been explicitly specified. If no format has been explicitly specified then no
EABI attributes will be written.
If the format is not explicitly specified then any float16 directives are encoding using the IEEE 754-2008
format by default until the format is fixed or changed with the float16_format directive.
gas * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings.
(md_atof): Set precision for float16 type.
(arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative
format.
(set_fp16_format): Parse a float16_format directive.
(arm_parse_fp16_opt): Parse the fp16-format command line option.
(aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute.
* config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to
arm_is_largest_exponent_ok.
(arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function.
* doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format=
* testsuite/gas/arm/float16-bad.d: New test.
* testsuite/gas/arm/float16-bad.l: New test.
* testsuite/gas/arm/float16-bad.s: New test.
* testsuite/gas/arm/float16-be.d: New test.
* testsuite/gas/arm/float16-format-bad.d: New test.
* testsuite/gas/arm/float16-format-bad.l: New test.
* testsuite/gas/arm/float16-format-bad.s: New test.
* testsuite/gas/arm/float16-format-opt-bad.d: New test.
* testsuite/gas/arm/float16-format-opt-bad.l: New test.
* testsuite/gas/arm/float16-le.d: New test.
* testsuite/gas/arm/float16.s: New test.
* testsuite/gas/arm/float16-eabi-alternative-format.d: New test.
* testsuite/gas/arm/float16-eabi-ieee-format.d: New test.
* testsuite/gas/arm/float16-eabi-no-format.d: New test.
* testsuite/gas/arm/float16-eabi.s: New test.
* config/atof-ieee.c (H_PRECISION): Macro for precision of float16
type.
(atof_ieee): Set precision and exponent bits for encoding float16
types.
(gen_to_words): NaN and Infinity encoding for float16.
(ieee_md_atof): Set precision for encoding float16 type.
In order to be able to add/remove insns to/from the middle of these
tests, generalize the patterns for the symbol reference comments of RIP-
relative operands.
Previously GAS would accept .u32, .u16 and .u8 suffixes to the VQ(R)DMLAH and VQ(R)DMLASH
instructions, however the Armv8.1-M Mainline specification states that these functions only
have signed variations (.s32, .s16 and .s8 suffixes).
This is documented here:
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf?_ga=2.143079093.1892401233.1563295591-999473562.1560847439#page=1183
gas * config/tc-arm.c (do_mve_vqdmlah): Use N_S_32 macro.
(do_neon_qrdmlah): Use N_S_32 macro.
* testsuite/gas/arm/mve-vqdmlah-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlah.s: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash.s: Remove unsigned instruction tests.
opcodes * arm-dis.c: Only accept signed variants of VQ(R)DMLAH and VQ(R)DMLASH
instructions.
New instruction are added, and some of them are overlapping. Update
disassembler to correctly recognize them. Introduce nps400 option.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (skip_this_opcode): Check also for 0x07 major opcodes,
and MPY class instructions.
(parse_option): Add nps400 option.
(print_arc_disassembler_options): Add nps400 info.
gas/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/nps400-6.d: Update test.
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it
should have required ELFOSABI_GNU since these flags are already in use
by other OSes. HPUX SHF_HP_TLS in fact has the same value. That
means no place in binutils should test SHF_GNU_MBIND without first
checking OSABI, and SHF_GNU_MBIND should not be set without also
setting OSABI. At least, that's the ideal, but the patch accepts
SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always
set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't
proper without a non-zero OSABI, readelf will display the flag as
LOOS+0 if OSABI isn't set.
The clash with SHF_HP_TLS means that hppa64-linux either has that flag
on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux
users, if there are any, may have noticed that GNU ld since 2017
mysteriously aligned their .tbss sections to a 4k boundary. That was
one consequence of SHF_HP_TLS being blindly interpreted as
SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and
the linux kernel don't care about SHF_HP_TLS I took that flag out of
.tbss for hppa64-linux.
bfd/
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind.
(get_program_header_size): Formatting. Only test SH_GNU_MBIND
when elf_gnu_osabi_mbind is set.
(_bfd_elf_map_sections_to_segments): Likewise.
(_bfd_elf_init_private_section_data): Likewise.
(_bfd_elf_final_write_processing): Update comment.
* elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry.
(elf_backend_special_sections): Define without .tbss for linux.
binutils/
* readelf.c (get_parisc_segment_type): Split off hpux entries..
(get_ia64_segment_type): ..and these..
(get_hpux_segment_type): ..to here.
(get_segment_type): Condition GNU_MBIND on osabi. Use
get_hpux_segment_type.
(get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
(get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
gas/
* config/obj-elf.c (obj_elf_change_section): Don't emit a fatal
error for non-SHF_ALLOC SHF_GNU_MBIND here.
(obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new
gnu_attr param.
(obj_elf_section): Adjust obj_elf_parse_section_letters call.
Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr.
Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi.
(obj_elf_type): Set elf_osabi for ifunc.
* testsuite/gas/elf/section12a.d: xfail msp430 and hpux.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.l: Adjust expected error.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition
SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
The instructions that this change apply to are:
VQDMLADH, VQRDMLADH, VQDMLSDH, VQRDMLSDH
The updated documentation is here: https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf
Fixed this by removing the check for this warning from GAS as well as opcodes.
Added testcases to test that the warning is not generated for the instructions that have a 32-bit element size
and the same source and destination operand. Also fixed tests that would previously check for this warning.
gas * config/tc-arm.c (do_mve_vqdmladh): Remove check for UNPREDICTABLE.
* testsuite/gas/arm/mve-vqdmladh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmladh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmladh.d: New tests.
* testsuite/gas/arm/mve-vqdmladh.s: New tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh.d: New tests.
* testsuite/gas/arm/mve-vqdmlsdh.s: New tests.
opcodes * arm-dis.c (is_mve_unpredictable): Stop marking some MVE
instructions as UNPREDICTABLE.
This patch changes the eBPF CPU description to prefer the register
names %r0 and %r6 instead of %a and %ctx when disassembling. This
matches better with the current practice, vs. cBPF.
It also updates the GAS tests in order to reflect this change.
Tested in a x86_64 host.
cpu/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (h-gpr): when disassembling, use %r0 and %r6 instead of
%a and %ctx.
opcodes/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerated.
gas/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.d: Use %r6 instead of %ctx.
* testsuite/gas/bpf/lddw-be.d: Likewise.
* testsuite/gas/bpf/lddw.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
After some discussion, we've decided to rename the +bitperm feature
flag to +sve2-bitperm, so that it's consistent with the other SVE2
feature flags. The associated internal macros already used
"SVE2_BITPERM", so only the feature flag itself needs to change.
2019-07-19 Richard Sandiford <richard.sandiford@arm.com>
gas/
* doc/c-aarch64.texi: Remame the +bitperm extension to +sve2-bitperm.
* config/tc-aarch64.c (aarch64_features): Likewise.
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sve2-sha3.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2-sm4.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2.d: Likewise.
* testsuite/gas/aarch64/sve2.d: Likewise.
This little patch adds support to the eBPF port of GAS for a few data
directives. The names for the directives have been chosen to be
coherent with the suffixes used in eBPF instructions: b, h, w and dw
for 8, 16, 32 and 64-bit values respectively.
Documentation and tests included.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_pseudo_table): .half, .word and .dword.
* testsuite/gas/bpf/data.s: New file.
* testsuite/gas/bpf/data.d: Likewise.
* testsuite/gas/bpf/data-be.d: Likewise.
* testsuite/gas/bpf/bpf.exp: Run data and data-be.
* doc/c-bpf.texi (BPF Directives): New section.
They're the only exception to there generally being no mix of register
kinds possible in an insn operand template, and there being two bits per
operand for their representation is also quite wasteful, considering the
low number of uses. Fold both bits and deal with the little bit of
fallout.
Also take the liberty and drop dead code trying to set REX_B: No segment
register has RegRex set on it.
Additionally I was quite surprised that PUSH/POP with the permitted
segment registers is not covered by the test cases. Add the missing
pieces.
This patch fixes the eBPF CPU description in order to reflect the
right explicit arguments passed to the ldabs{b,h,w,dw} instructions,
updates the corresponding GAS tests, and updates the BPF section of
the GAS manual.
cpu/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlabs): New pmacro.
(dlind): Likewise.
opcodes/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
gas/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: ldabs instructions do not take a `src'
register as an argument.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
* doc/c-bpf.texi (BPF Opcodes): Update to reflect the correct
explicit arguments to ldabs and ldind instructions.
The eBPF non-generic load instructions ldind{b,h,w,dw} and
ldabs{b,h,w,dw} do not take an explicit destination register as an
argument. Instead, they put the loaded value in %r0, implicitly.
This patch fixes the CPU BPF description to not expect a 'dst'
argument in these arguments, regenerates the corresponding files in
opcodes, and updates the impacted GAS tests.
Tested in a x86-64 host.
cpu/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlsi): ldabs and ldind instructions do not take an
explicit 'dst' argument.
opcodes/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
gas/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: Do not use explicit arguments for
ldabs and ldind instructions.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
git commit f2d4ba38f5 caused many failures for mips-sgi-irix targets,
and added a new test that failed for aarch64, nds32, and rl78.
The mips failures are due to BSF_OBJECT being set in many cases for
symbols by the mips .global/.globl directive. This patch removes that
code and instead sets BSF_OBJECT in a target frob_symbol function,
also moving the mips hacks in elf_frob_symbol to the new function.
Note that common symbols are handled fine in elf.c:swap_out_syms
without needing to set BSF_OBJECT, so that old code can disappear.
* config/obj-elf.c (elf_frob_symbol): Remove mips hacks.
* config/tc-mips.h (tc_frob_symbol): Define.
(mips_frob_symbol): Declare.
* config/tc-mips.c (s_mips_globl): Don't set BSF_OBJECT for irix.
(mips_frob_symbol): Fudge symbols for irix here.
* testsuite/gas/elf/type-2.e: Allow random target symbols.
From Kito Cheng <kito.cheng@sifive.com>
gas/ChangeLog
* doc/c-riscv.texi (Instruction Formats): Add r4 type.
* testsuite/gas/riscv/insn.d: Add testcase for r4 type.
* testsuite/gas/riscv/insn.s: Ditto.
* doc/c-riscv.texi (Instruction Formats): Add b and j type.
* testsuite/gas/riscv/insn.d: Add test case for b and j type.
* testsuite/gas/riscv/insn.s: Ditto.
* testsuite/gas/riscv/insn.s: Correct instruction type for load
and store.
* testsuite/gas/riscv/insn.d: Using regular expression to match
address.
* doc/c-riscv.texi (Instruction Formats): Fix encoding table for SB
type and fix typo.
opcode/ChangeLog
* riscv-opc.c (riscv_insn_types): Add r4 type.
* riscv-opc.c (riscv_insn_types): Add b and j type.
* opcodes/riscv-opc.c (riscv_insn_types): Remove incorrect
format for sb type and correct s type.
Recently a patch was submitted for a Xen Project test harness binary to
override the compiler specified @object to @func (see [1]). In a reply I
suggested we shouldn't make ourselves dependent on currently unspecified
behavior of gas here: It accumulates all requests, and then
bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes
certain flags over others.
Make the behavior predictable: Generally the last .type is what counts.
Exceptions are directives which set multiple bits (TLS, IFUNC, and
UNIQUE): Subsequent directives requesting just the more generic bit
(i.e. FUNC following IFUNC) won't clear the more specific one. Warn
about incompatible changes, except from/to STT_NOTYPE.
Also add a new target hook, which hppa wants to use right away afaict.
In the course of adding the warning I ran into two ld testsuite
failures. I can only assume that it was a copy-and-paste mistake that
lead to the same symbol having its type set twice.
[1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
For example, when provided with the (incorrect) instruction
st4 {v0.16b-v3.16b}[4],[x0]
currently assembler provides the following error message
"Error: comma expected between operands at operand 2 -- `st4 {v0.16b-v3.16b}[4],[x0]'".
This was due to the assembler consuming the {v0.16b-v3.16b} as the first operand leaving
[4],[x0] as what it believed to be the second operand.
The actual error is that the first operand should be of element type and not
vector type (as provided). The new diagnostic for this error is
"Error: expected element type rather than vector type at operand 1 -- `st4 {v0.16b-v3.16b}[4],[x0]'.
Added testcases to check for the correct diagnostic message as well as checking that
variations of the structural load/store by element instruction also generate the error
when they have the same problem.
* config/tc-aarch64.c (parse_operands): Add error check.
* testsuite/gas/aarch64/diagnostic.l: New test.
* testsuite/gas/aarch64/diagnostic.s: New test.
* testsuite/gas/aarch64/illegal.l: New tests.
* testsuite/gas/aarch64/illegal.s: New tests.
The entry for the FMOV alias of FCPY was missing C_SCAN_MOVPRFX.
(The entry for FCPY itself was OK.)
This was the only /m-predicated instruction I could see that was
missing the flag.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_SCAN_MOVPRFX for the
SVE FMOV alias of FCPY.
gas/
* testsuite/gas/aarch64/sve-movprfx_27.s,
* testsuite/gas/aarch64/sve-movprfx_27.d: New test.
SVE FCVTZS, FCVTZU, SCVTF and UCVTF need the same treatment as FCVT:
the register size used in a predicated MOVPRFX must be the wider of
the destination and source sizes.
Since I was adding a (supposedly) complete set of tests for converts,
it seemed more consistent to add a complete set of tests for shifts
as well, even though there's no bug to fix there.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Add C_MAX_ELEM flags
to SVE fcvtzs, fcvtzu, scvtf and ucvtf entries.
gas/
* testsuite/gas/aarch64/sve-movprfx_26.s: Also test FCVTZS, FCVTZU,
SCVTF, UCVTF, LSR and ASR.
* testsuite/gas/aarch64/sve-movprfx_26.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_26.l: Likewise.
One of the MOVPRFX tests has:
output register of preceding `movprfx' used as input at operand 3 -- `cpy z1.d,p1/m,x1'
But X1 and Z1 are not the same register, so the instruction is
actually OK.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-opc.c (verify_constraints): Skip GPRs when scanning the
registers in an instruction prefixed by MOVPRFX.
gas/
* testsuite/gas/aarch64/sve-movprfx_25.s: Allow CPY Z1.D.P1/M,X1
to be prefixed by MOVPRFX.
* testsuite/gas/aarch64/sve-movprfx_25.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_25.l: Likewise.
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
It seems to be not uncommon for people to use AND or OR in this form for
just setting the status flags. TEST, which doesn't write to any
register other than EFLAGS, ought to be preferred. Make the change only
for -O2 and above though, at least for now.
When they're in the 0F opcode space, swapping their source operands may
allow switching from 3-byte to 2-byte VEX prefix encoding. Note that NaN
behavior precludes us doing so for many packed and scalar floating point
insns; such an optimization would need to be done by the compiler
instead in this case, when it knows that NaN-s have undefined behavior
anyway.
While for explicitly specified AVX/AVX2 insns the optimization (for now
at least) gets done only for -O2 and -Os, it is utilized by default in
SSE2AVX mode, as there we're re-writing the programmer's specified insns
anyway.
Rather than introducing a new attribute flag, the change re-uses one
which so far was meaningful only for EVEX-encoded insns.
As long as there's no write mask as well as no broadcast, and as long
as the scaled Disp8 wouldn't result in a shorter EVEX encoding, encode
VPAND{D,Q}, VPANDN{D,Q}, VPOR{D,Q}, and VPXOR{D,Q} acting on only the
lower 16 XMM/YMM registers using their VEX equivalents with -O1.
Also take the opportunity and avoid looping twice over all operands
when dealing with memory-with-displacement ones.
While the ISA extensions doc suggests them to be made available just
like the SDM does for the PCLMULQDQ ISA extension, these weren't added
when supposrt for the new extension was introduced.
Also make sure the 64-bit non-AVX512 test actually tests VEX encodings,
not EVEX ones.
For example, this code is invalid:
smc #0x6951
The code would previously check for and encode for up to 16 bit immediate values, however
this immediate should instead be only a 4 bit value
(as documented herehttps://static.docs.arm.com/ddi0406/c/DDI0406C_C_arm_architecture_reference_manual.pdf ).
Fixed this by adding range checks in the relevant areas and also removing code that would
encode more than the first 4 bits of the immediate (code that is now redundant, as any immediate operand
larger than 0xF would error now anyway).
gas * config/tc-arm.c (do_smc): Add range check for immediate operand.
(do_t_smc): Add range check for immediate operand. Remove
obsolete immediate encoding.
(md_apply_fix): Fix range check. Remove obsolete immediate encoding.
* testsuite/gas/arm/arch6zk.d: Fix test.
* testsuite/gas/arm/arch6zk.s: Fix test.
* testsuite/gas/arm/smc-bad.d: New test.
* testsuite/gas/arm/smc-bad.l: New test.
* testsuite/gas/arm/smc-bad.s: New test.
* testsuite/gas/arm/thumb32.d: Fix test.
* testsuite/gas/arm/thumb32.s: Fix test.
These encodings aren't valid in real and VM86 modes, but they are very
well usable in 16-bit protected mode.
A few adjustments in the disassembler tables are needed where Ev or Gv
were wrongly used. Additionally an adjustment is needed to avoid
printing "addr32" when that's already recognizable by the use of %eiz.
Furthermore the Iq operand template was wrong for XOP:0Ah encoding
insns: They're having a uniform 32-bit immediate. Drop Iq and introduce
Id instead.
Clone a few existing test cases to exercise assembler and disassembler.
Noticed by a customer while looking at a tangentially related problem. The
gas testsuite for xstormy16 has two scripts that have a typo on the first
line, they are missing the !. They also use shell syntax that doesn't work
on a system where /bin/sh is dash. So I fixed the typo, changed the shell
to bash, and made them executable, so that they now work when run directly
even if /bin/sh is dash.
gas/
* testsuite/gas/xstormy16/allinsn.sh: Change first line to
#!/bin/bash and make it executable.
* testsuite/gas/xstormy16/gcc.sh: Likewise.
When MTHC1 instruction is paired with MTC1 to write a value to a
64-bit FPR, the MTC1 must be executed first, because the semantic
definition of MTC1 is not aware that software will be using an MTHC1
to complete the operation, and sets the upper half of the 64-bit FPR
to an UNPREDICTABLE value[1].
Fix the order of MTHC1 and MTC1 instructions in LI macro expansion.
Modify the expansions to exploit moves from $zero directly by-passing
the use of $AT, where ever possible.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Wave Computing, Inc., Document
Number: MD00086, Revision 5.04, December 11, 2013, Section 3.2
"Alphabetical List of Instructions", pp. 217.
gas/
* config/tc-mips.c (macro) <M_LI>: Re-order MTHC1 with
respect to MTC1 and use $0 for either part where possible.
* testsuite/gas/mips/li-d.s: Add test cases for non-zero
words in double precision constants.
* testsuite/gas/mips/li-d.d: Update reference output.
* testsuite/gas/mips/micromips@isa-override-1.d: Likewise.
* testsuite/gas/mips/mips32r2@isa-override-1.d: Likewise.
* testsuite/gas/mips/mips64r2@isa-override-1.d: Likewise.
MOVNTI was wrongly assembled with a 66h prefix. Add IgnoreSize to
address this. It and the scalar to/from integer conversion insns also
were also wrongly using Ev / Gv, leading to 16-bit register names being
printed when 32-bit ones were meant.
Clone the 32-bit SSE2 test to cover both assembler and disassembler.
This patch corrects ppc rs_align_code handling to choose the alignment
nops based on the machine in force at the alignment directive rather
than the machine at the end of file.
* config/tc-ppc.h (ppc_nop_select): Declare.
(NOP_OPCODE): Define.
* config/tc-ppc.c (ppc_elf_end, ppc_xcoff_end): Zero ppc_cpu.
(ppc_nop_encoding_for_rs_align_code): New enum.
(ppc_nop_select): New function.
(ppc_handle_align): Don't use ppc_cpu here. Get nop type from frag.
* testsuite/gas/ppc/groupnop.d,
* testsuite/gas/ppc/groupnop.s: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
If VEX.vvvv and EVEX.vvvv are reserved, they must be all 1s, which are
all 0s in inverted form. Add check for unused VEX.vvvv and EVEX.vvvv
when disassembling VEX and EVEX instructions.
gas/
PR binutils/24626
* testsuite/gas/i386/disassem.s: Add tests for reserved VEX.vvvv
and EVEX.vvvv.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24626
* i386-dis.c (print_insn): Check for unused VEX.vvvv and
EVEX.vvvv when disassembling VEX and EVEX instructions.
(OP_VEX): Set vex.register_specifier to 0 after readding
vex.register_specifier.
(OP_Vex_2src_1): Likewise.
(OP_Vex_2src_2): Likewise.
(OP_LWP_E): Likewise.
(OP_EX_Vex): Don't check vex.register_specifier.
(OP_XMM_Vex): Likewise.
This fixes a bug reported on the riscv.org sw-dev mailing list. This
rejects "lui x1,symbol", as a symbol should only be accepted here when
used inside %hi(). Without the fix, this gets assembled as "lui x1,0"
with no relocation which is clearly wrong.
gas/
* config/tc-riscv.c (riscv_ip) <'u'>: Move O_constant check inside if
statement. Delete O_symbol and O_constant check after if statement.
* testsuite/gas/riscv/auipc-parsing.s: Test lui with missing %hi.
* testsuite/gas/riscv/auipc-parsing.l: Update.
For AVX512 instructions with Disp8ShiftVL and Broadcast, we may need to
add CheckRegSize to check if broadcast matches the destination register
size.
gas/
PR gas/24625
* testsuite/gas/i386/inval-avx512f.s: Add tests for AVX512_BF16
instructions with invalid broadcast.
* testsuite/gas/i386/x86-64-inval-avx512f.s: Likewise.
* testsuite/gas/i386/inval-avx512f.l: Updated.
* testsuite/gas/i386/x86-64-inval-avx512f.l: Likewise.
opcodes/
PR gas/24625
* i386-opc.tbl: Add CheckRegSize to AVX512_BF16 instructions with
Disp8ShiftVL.
* i386-tbl.h: Regenerated.
Targets that lack ppc64 support were failing the new prefix-reloc
test. This patch adds some test infrastructure to deal with that, and
changes the powerpc gas usage info so that "-a64" is omitted when
unsupported.
I've been meaning to break up the usage message for a long time;
While doing so causes translators some work now, it should make it
easier next time a new powerpc option is added.
* config/tc-ppc.c (is_ppc64_target): New function.
(md_show_usage): Split up usage message. Don't show -a64 when
unsupported.
testsuite/gas/ppc/ppc.exp (supports_ppc64): New.
(prefix-reloc): Only run for ppc64.
Allow st_other values such as STO_AARCH64_VARIANT_PCS to be set for alias
symbols independently. This is needed for ifunc symbols which are
aliased to the resolver using .set and don't expect resolver attributes
to override the ifunc symbol attributes. This means .variant_pcs must be
added explicitly to aliases.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_elf_copy_symbol_attributes): Define.
* config/tc-aarch64.h (aarch64_elf_copy_symbol_attributes): Declare.
(OBJ_COPY_SYMBOL_ATTRIBUTES): Define.
* testsuite/gas/aarch64/symbol-variant_pcs-3.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-3.s: New test.
In ELF objects the specified symbol is marked with STO_AARCH64_VARIANT_PCS.
gas/ChangeLog:
* config/tc-aarch64.c (s_variant_pcs): New function.
* doc/c-aarch64.texi: Document .variant_pcs.
* testsuite/gas/aarch64/symbol-variant_pcs-1.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-1.s: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.s: New test.
This patch adds initial 64-bit insn assembler/disassembler support.
The only instruction added is "pnop" along with the automatic aligning
of prefix instruction so they do not cross 64-byte boundaries.
include/
* dis-asm.h (WIDE_OUTPUT): Define.
* opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare.
(PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX),
(PPC_PREFIX_P, PPC_PREFIX_SEG): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "future" entry.
(PREFIX_OPCD_SEGS): Define.
(prefix_opcd_indices): New array.
(disassemble_init_powerpc): Initialize prefix_opcd_indices.
(lookup_prefix): New function.
(print_insn_powerpc): Handle 64-bit prefix instructions.
* ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK),
(PMRR, POWERXX): Define.
(prefix_opcodes): New instruction table.
(prefix_num_opcodes): New constant.
binutils/
* objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes.
(struct insn_label_list): New.
(insn_labels, free_insn_labels): New variables.
(ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs.
(ppc_frob_label, ppc_new_dot_label): Move functions earlier in file
and call ppc_record_label.
(md_assemble): Handle 64-bit prefix instructions. Align labels
that are on the same line as a prefix instruction.
* config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to
later in the file.
(md_start_line_hook): Define.
(ppc_start_line_hook): Declare.
* testsuite/gas/ppc/prefix-align.d,
* testsuite/gas/ppc/prefix-align.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new test.
H.J. Lu
Jan Beulich
Andre Vieira
Jozef Lawrynowicz
Lili Cui
Sergey Belyashov
Claudiu Zissulescu
Alan Modra
Nick Clifton
Kyrylo Tkachov
Andrew Burgess
Andrew Pinski
Mihail Ionescu
Jim Wilson
Matthew Malcomson
Delia Burduv
Tamar Christina
Srinath Parvathaneni
Kito Cheng
Dennis Zhang
Bosco Garc?a
Barnaby Wilks
Faraz Shahbazker
Yoshinori Sato
Jose E. Marchesi
Richard Sandiford
Jan Beulich
Peter Bergner
Szabolcs Nagy