The instructions that this change apply to are:
VQDMLADH, VQRDMLADH, VQDMLSDH, VQRDMLSDH
The updated documentation is here: https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf
Fixed this by removing the check for this warning from GAS as well as opcodes.
Added testcases to test that the warning is not generated for the instructions that have a 32-bit element size
and the same source and destination operand. Also fixed tests that would previously check for this warning.
gas * config/tc-arm.c (do_mve_vqdmladh): Remove check for UNPREDICTABLE.
* testsuite/gas/arm/mve-vqdmladh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmladh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmladh.d: New tests.
* testsuite/gas/arm/mve-vqdmladh.s: New tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh.d: New tests.
* testsuite/gas/arm/mve-vqdmlsdh.s: New tests.
opcodes * arm-dis.c (is_mve_unpredictable): Stop marking some MVE
instructions as UNPREDICTABLE.
Older gcc warns, arguably incorrectly, about name collisions between
global functions and function-local variable names. Consesus has been
to rename local variables whenever this is spotted, hence committed as
obvious. Note the pre-existing variable named idx; "index_operand"
seemed logical given the context.
* arm-dis.c (print_insn_coprocessor): Rename index to
index_operand.
This patch makes changes to the <spec_reg> operand for VMRS and VMSR
instructions as per the Armv8.1-M Mainline.
New <spec_reg> options to support are:
0b0010: FPSCR_nzcvqc, access to FPSCR condition and saturation flags.
0b1100: VPR, privileged only access to the VPR register.
0b1101: P0, access to VPR.P0 predicate fields
0b1110: FPCXT_NS, enables saving and restoring of Non-secure floating
point context.
0b1111: FPCXT_S, enables saving and restoring of Secure floating point
context
*** gas/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (parse_operands): Update case OP_RVC to
parse p0 and P0.
(do_vmrs): Add checks for valid operands with respect to
cpu and fpu options.
(do_vmsr): Likewise.
(reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS
and FPCXT_S.
* testsuite/gas/arm/armv8_1-m-spec-reg.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg.s: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New.
* testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values.
* testsuite/gas/arm/vfp1xD_t2.d: Likewise.
*** opcodes/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (coprocessor_opcodes): New instructions for VMRS
and VMSR with the new operands.
This patch adds the following instructions which are part of the
Armv8.1-M Mainline:
CINC
CINV
CNEG
CSINC
CSINV
CSNEG
CSET
CSETM
CSEL
gas/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (TOGGLE_BIT): New.
(T16_32_TAB): New entries for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm and csel.
(operand_parse_code): New OP_RR_ZR.
(parse_operand): Handle case for OP_RR_ZR.
(do_t_cond): New.
(insns): New instructions for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm, csel.
* testsuite/gas/arm/armv8_1-m-cond-bad.d: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.l: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.s: New test.
* testsuite/gas/arm/armv8_1-m-cond.d: New test.
* testsuite/gas/arm/armv8_1-m-cond.s: New test.
opcodes/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (enum mve_instructions): New enum
for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv
and cneg.
(mve_opcodes): New instructions as above.
(is_mve_encoding_conflict): Add cases for csinc, csinv,
csneg and csel.
(print_insn_mve): Accept new %<bitfield>c and %<bitfield>C.
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(print_insn_thumb32): Handle new instructions.
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_unpredictable): Likewise.
(mve_opcodes): Add new instructions.
(print_mve_unpredictable): Handle new reasons.
(print_mve_register_blocks): New print function.
(print_mve_size): Handle new instructions.
(print_insn_mve): Likewise.
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new values.
(mve_opcodes): Add new instructions.
(vec_condnames): New array with vector conditions.
(mve_predicatenames): New array with predicate suffixes.
(mve_vec_sizename): New array with vector sizes.
(enum vpt_pred_state): New enum with vector predication states.
(struct vpt_block): New struct type for vpt blocks.
(vpt_block_state): Global struct to keep track of state.
(mve_extract_pred_mask): New helper function.
(num_instructions_vpt_block): Likewise.
(mark_outside_vpt_block): Likewise.
(mark_inside_vpt_block): Likewise.
(invert_next_predicate_state): Likewise.
(update_next_predicate_state): Likewise.
(update_vpt_block_state): Likewise.
(is_vpt_instruction): Likewise.
(is_mve_encoding_conflict): Add entries for new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_unpredictable): Handle new cases.
(print_instruction_predicate): Likewise.
(print_mve_size): New function.
(print_vec_condition): New function.
(print_insn_mve): Handle vpt blocks and new print operands.
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm-dis.c (print_insn_coprocessor_1): Disable the use of coprocessors
8, 14 and 15 for Armv8.1-M Mainline.
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case.
Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg ().
A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match.
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal
relocation.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (parse_sys_vldr_vstr): New function.
(OP_VLDR): New enum operand_parse_code enumerator.
(parse_operands): Add logic for OP_VLDR.
(do_t_vldr_vstr_sysreg): New function.
(do_vldr_vstr): Likewise.
(insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode.
(md_apply_fix): Add bound check for VLDR and VSTR co-processor offset.
Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad
uses of VLDR and VSTR.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for
above bad uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and
VSTR valid uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the
above examples.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (coprocessor_opcodes): Document new %J and %K format
specifier. Add entries for VLDR and VSTR of system registers.
(print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in
coprocessor instructions on Armv8.1-M Mainline targets. Add handling
of %J and %K format specifier.
Like for CLRM, this patch aims to share as much logic with the similar looking VLDM/VSTM. This is achieved by adding 2 new enumerator values in enum reg_list_els for the single-precision and double-precision variants of VSCCLRM and extending parse_vfp_reg_list () to deal with these types.
These behave like the existing REGLIST_VFP_S and REGLIST_VFP_D types with extra logic to expect VPR as the last element in the register list.
The function is algo augmented with a new partial_match parameter to indicate if any register other than VPR had already been parsed in the register list so as to not try parsing the second variant if that's the case and return the right error message.
The rest of the patch is the usual encoding function, new disassembler table entries and format specifier and parsing, encoding and disassembling tests.
It is worth mentioning that the new entry in the disassembler table was added in the coprocessor-related table despite VSCCLRM always being available even in FPU-less configurations. The main reason for this is that VSCCLRM also match VLDMIA entry and must thus be tried first but coprocessor entries are tried before T32 entries. It also makes sense because it is in the same encoding space as coprocessor and VFP instructions and is thus the natural place for someone to look for this instruction.
Note: Both variants of VSCCLRM support D16-D31 registers but Armv8.1-M Mainline overall does not. I have thus decided not to implement support for these registers in order to keep the code simpler. It can always be added later if needed.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (arm_typed_reg_parse): Fix typo in comment.
(enum reg_list_els): New REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR
enumerators.
(parse_vfp_reg_list): Add new partial_match parameter. Set
*partial_match to TRUE if at least one element in the register list has
matched. Add support for REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR
register lists which expect VPR as last element in the list.
(s_arm_unwind_save_vfp_armv6): Adapt call to parse_vfp_reg_list to new
prototype.
(s_arm_unwind_save_vfp): Likewise.
(enum operand_parse_code): New OP_VRSDVLST enumerator.
(parse_operands): Adapt call to parse_vfp_reg_list to new prototype.
Handle new OP_VRSDVLST case.
(do_t_vscclrm): New function.
(insns): New entry for VSCCLRM instruction.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add invalid VSCCLRM
instructions.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error expectations
for above instructions.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add tests for VSCCLRM
instruction.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add expected disassembly
for above instructions.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (coprocessor_opcodes): Document new %C format control code.
Add new entries for VSCCLRM instruction.
(print_insn_coprocessor): Handle new %C format control code.
The coprocessor_opcodes table is used both to share commonalities in coprocessor-related instructions and to avoid duplication between Arm and Thumb mode. However, some instructions do have differences between Arm and Thumb. For instance, vldmia allows PC as base register in Arm mode but not in Thumb mode.
In that very case the distinction becomes necessary because the encoding with PC as base register is used in Thumb mode to denote a VSCCLRM. It is thus necessary to distinguish what is Arm or Thumb only from what is shared. This patch adds an extra field to the coprocessor_opcodes table entries to indicate what mode is a given instruction available in. The print_insn_coprocessor then uses that field to determine if an entry that matched the mark and value checked should be allowed to match or not given the current mode.
ChangeLog entry is as follows:
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (enum isa): New enum.
(struct sopcode32): New structure.
(coprocessor_opcodes): change type of entries to struct sopcode32 and
set isa field of all current entries to ANY.
(print_insn_coprocessor): Change type of insn to struct sopcode32.
Only match an entry if its isa field allows the current mode.
Given the similarity between LDM/STM and CLRM register lists, most of the changes in this patch aim at sharing code between those two sets of instruction. Sharing is achieved both in parsing and encoding of those instructions.
In terms of parsing, parse_reg_list () is extended to take a type that describe what type of instruction is being parsed. The reg_list_els used for parse_vfp_reg_list () is reused for the type and that function is added an assert for the new REGLIST_CLRM and REGLIST_RN enumerators.
parse_reg_list () is then taught to accept APSR and reject SP and PC when parsing for a CLRM instruction. At last, caller of parse_reg_list () is updated accordingly and logic is added for the new OP_CLRMLST operand.
Encoding-wise, encode_thumb2_ldmstm () is reused to encode the variable bits of CLRM and is thus renamed encode_thumb2_multi (). A new do_io parameter is added to distinguish between LDM/STM and CLRM which guard all the LDM/STM specific code of the function.
Finally objdump is told how to disassemble CLRM, again reusing the logic to print the LDM/STM register list (format specifier 'm'). Tests are also added in the form of negative tests to check parsing and encoding/disassembling tests.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (enum reg_list_els): Define earlier and add
REGLIST_RN and REGLIST_CLRM enumerators.
(parse_reg_list): Add etype parameter to distinguish between regular
core register list and CLRM register list. Add logic to
recognize CLRM register list.
(parse_vfp_reg_list): Assert type is not for core register list.
(s_arm_unwind_save_core): Update call to parse_reg_list to new
prototype.
(enum operand_parse_code): Declare OP_CLRMLST enumerator.
(parse_operands): Update call to parse_reg_list to new prototype. Add
logic for OP_CLRMLST.
(encode_thumb2_ldmstm): Rename into ...
(encode_thumb2_multi): This. Add do_io parameter. Add logic to
encode CLRM and guard LDM/STM only code by do_io.
(do_t_ldmstm): Adapt to use encode_thumb2_multi.
(do_t_push_pop): Likewise.
(do_t_clrm): New function.
(insns): Define CLRM.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.d: New file.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Likewise.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (thumb_opcodes): Document %n control code. Add entry for
CLRM.
(print_insn_thumb32): Add logic to print %n CLRM register list.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds support to the Scalar low overhead loop instructions:
LE
WLS
DLS
We also add a new assembler resolvable relocation bfd_reloc_code_real enum for the 12-bit branch offset used in these instructions.
ChangeLog entries are as follows:
*** bfd/ChnageLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_LOOP12): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
*** gas/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR
for the LR operand and optional LR operand.
(parse_operands): Add switch cases for OP_LR and OP_oLR for
both type checking and value checking.
(encode_thumb32_addr_mode): New entries for DLS, WLS and LE.
(v8_1_loop_reloc): New helper function for handling labels
for the low overhead loop instructions.
(do_t_loloop): New function to encode DLS, WLS and LE.
(insns): New entries for WLS, DLS and LE.
(md_pcrel_from_section): New switch case
for BFD_RELOC_ARM_THUMB_LOOP12.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-tloop.s: New.
* testsuite/gas/arm/armv8_1-m-tloop.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.s: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.l: New.
*** opcodes/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %P
and %Q patterns.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum.
ChangeLog entries are as follows:
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entriy for bfcsel.
(do_t_v8_1_branch): New switch case for bfcsel.
(toU): Define.
(insns): New instruction for bfcsel.
(md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BFCSEL.
(md_appdy_fix): Likewise
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-bfcsel.d: New.
* testsuite/gas/arm/armv8_1-m-bfcsel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfcsel.s: New.
* testsuite/ld-arm/bfcsel.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfcsel.
(print_insn_thumb32): Edit the switch case for %Z.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This adds infrastructure for the BFCSEL instructions which is one of the first
instructions in Arm that have more than one relocations in them.
This adds a new relocation R_ARM_THM_BF12.
The inconsistency between external R_ARM_THM_BF12 and internal
BFD_RELOC_ARM_THUMB_BF13 is because internally we count the static bit-0 of the
immediate and we don't externally.
ChangeLog entries are as follows :
ChangeLog entries are as follows :
*** bfd/ChnageLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF13): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF13.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF13
and R_ARM_THM_BF12 together.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF13.
*** elfcpp/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF12): New relocation code.
*** gas/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF13.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF12.
*** opcodes/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %Z pattern.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This patch adds the BFL instruction.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entrie for bfl.
(do_t_v8_1_branch): New switch case for bfl.
(insns): New instruction for bfl.
* testsuite/gas/arm/armv8_1-m-bfl.d: New.
* testsuite/gas/arm/armv8_1-m-bfl.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfl.s: New.
* testsuite/ld-arm/bfl.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfl.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This adds infrastructure for the BFL instructions which is one of the first instructions in Arm that have more than one relocations in them.
This adds a new relocation R_ARM_THM_BF18.
The inconsistency between external R_ARM_THM_BF18 and internal
BFD_RELOC_ARM_THUMB_BF19 is because internally we count the static bit-0 of the immediate and we don't externally.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF19): New
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF18.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF19
and R_ARM_THM_BF18 together.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF19.
*** elfcpp/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF18): New relocation code.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF19.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF18.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %Y pattern.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFX and BFLX instructions.
ChangeLog entries are as follows :
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bfx and bflx.
(do_t_v8_1_branch): New switch cases for bfx and bflx.
(insns): New instruction for bfx and bflx.
* testsuite/gas/arm/armv8_1-m-bf-exchange.d: New.
* testsuite/gas/arm/armv8_1-m-bf-exchange.s: New.
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.s: New
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.l: New
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.d: New
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Add '%<bitfield>S' to print an
Arm register with r13 and r15 unpredictable.
(thumb32_opcodes): New instructions for bfx and bflx.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This patch adds the BF instruction.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bf.
(do_t_branch_future): New.
(insns): New instruction for bf.
* testsuite/gas/arm/armv8_1-m-bf.d: New.
* testsuite/gas/arm/armv8_1-m-bf.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bf.s: New.
* testsuite/ld-arm/bf.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instructions for bf.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This adds infrastructure for the BF instructions which is one of the first instructions in Arm that have more than one relocations in them.
This is the third infrastructure patch that adds a new relocation R_ARM_THM_BF16.
The inconsistency between external R_ARM_THM_BF16 and internal
BFD_RELOC_ARM_THUMB_BF17 is because internally we count the static bit-0 of the immediate and we don't externally.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF17): New enum.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF16.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF17
and R_ARM_THM_BF16 together.
(get_value_helper): New reloc helper.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF16.
*** elfcpp/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF16): New relocation code.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF17.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF16.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %W pattern.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This adds infrastructure for the Branch Future instructions (BF, BFX, BFL, BFLX,
BFCSEL). These are the first instructions in ARM that have more than one
relocations in them.
This is the first infrastructure patch that adds a new bfd_reloc_code_real enum
for the fallback branch offset.
This is common for all such instructions and needs to be resolvable by the
assembler.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BRANCH5): New enum.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BRANCH5.
(v8_1_branch_value_check): New function to check branch
offsets.
(md_appdy_fix): New switch case for
BFD_RELOC_THUMB_PCREL_BRANCH5.
(tc_gen_reloc): Likewise.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %G pattern.
The patch is straightforward, it does the following:
- support the new Tag_CPU_arch build attribute value, ie.:
+ declare the new value
+ update all the asserts forcing logic to be reviewed for new
architectures
+ create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and
add mapping from Tag_CPU_arch to it
+ teach readelf about new Tag_CPU_arch value
- declare armv8.1-m.main as a supported architecture value
- define Armv8.1-M Mainline in terms of feature bits available
- tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature
bits available
- update architecture-specific logic in gas and bfd guarded by the
asserts mentioned above.
- tests for all the above
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* archures.c (bfd_mach_arm_8_1M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline.
* elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline
and update assert.
(using_thumb2): Likewise.
(using_thumb2_bl): Update assert.
(arch_has_arm_nop): Likewise.
(bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline.
(tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging.
*** binutils/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline
Tag_CPU_arch build attribute value. Reindent.
(get_aeabi_cpu_arch_from_fset): Update assert.
(aeabi_set_public_attributes): Update assert for Tag_DIV_use logic.
* testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test.
*** include/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro.
(MAX_TAG_CPU_ARCH): Set value to above macro.
* opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro.
(ARM_AEXT_V8_1M_MAIN): Likewise.
(ARM_AEXT2_V8_1M_MAIN): Likewise.
(ARM_ARCH_V8_1M_MAIN): Likewise.
*** ld/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/attr-merge-13.attr: New test.
* testsuite/ld-arm/attr-merge-13a.s: New test.
* testsuite/ld-arm/attr-merge-13b.s: New test.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
Similar to the AArch64 patches the Arm disassembler has the same issues with
out of order sections but also a few short comings.
For one thing there are multiple code blocks to determine mapping symbols, and
they all work slightly different, and neither fully correct. The first thing
this patch does is centralise the mapping symbols search into one function
mapping_symbol_for_insn. This function is then updated to perform a search in
a similar way as AArch64.
Their used to be a value has_mapping_symbols which was used to determine the
default disassembly for objects that have no mapping symbols. The problem with
the approach was that it was determining this value in the same loop that needed
it, which is why this field could take on the states -1, 0, 1 where -1 means
"don't know". However this means that until you actually find a mapping symbol
or reach the end of the disassembly glob, you don't know if you did the right
action or not, and if you didn't you can't correct it anymore.
This is why the two jump-reloc-veneers-* testcases end up disassembling some
insn as data when they shouldn't.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for Arm [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix
this we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section
than we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: New test.
* testsuite/binutils-all/arm/in-order.d: New test.
* testsuite/binutils-all/arm/objdump.exp: Support .d tests.
* testsuite/binutils-all/arm/out-of-order-all.d: New test.
* testsuite/binutils-all/arm/out-of-order.T: New test.
* testsuite/binutils-all/arm/out-of-order.d: New test.
* testsuite/binutils-all/arm/out-of-order.s: New test.
ld/ChangeLog:
* testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly.
* testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly.
opcodes/ChangeLog:
* arm-dis.c (struct arm_private_data): Remove has_mapping_symbols.
(mapping_symbol_for_insn): Implement new algorithm.
(print_insn): Remove duplicate code.
The software trap instruction HLT that was introduced in Armv8-a is used
as the semihosting trap instruction in AArch64. In order to allow systems
configured to run AArch64 code to also run AArch32 with semihosting it was
decided that AArch32 should also use HLT in the case of the "mixed mode"
environment. This requires that HLT also be backported to all earlier
architectures. The instruction is in the undefined encoding space earlier
architectures but must trigger a semihosting trap [3].
The Arm Architectural Reference Manual [1] doesn't explicitly mention this
however this is an explicit requirement in the Semihosting-v2 protocol [2].
[1] https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile
[2] https://developer.arm.com/docs/100863/latest/the-semihosting-interface
[3] 19a6e31c9d
gas/ChangeLog:
* config/tc-arm.c (insns): Redefine THUMB_VARIANT and ARM_VARIANT for
hlt to armv1.
* testsuite/gas/arm/armv8a-automatic-hlt.d: Update TAGs
* testsuite/gas/arm/hlt.d: New test.
* testsuite/gas/arm/hlt.s: New test.
opcodes/ChangeLog:
* arm-dis.c (arm_opcodes): Redefine hlt to armv1.
This patch addresses the following
1) Adding ARMv8.5-A in select_arm_features.
2) Updating the feature macro so that the new ARM_EXT2_* features for
Armv8.5-A are moved to ARM_AEXT2_V8_5A.
*** opcodes/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (select_arm_features): Update bfd_mach_arm_8
with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML.
*** include/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_ARCH_V8_5A): Move ARM_EXT2_PREDRES and
ARM_EXT2_SB to ...
(ARM_AEXT2_V8_5A): Here.
The disassembler for Arm has some aborts in it in places it assumes can never
be reached. Under normal circumstances they indeed cannot be reached because
the right options are selected from the ARM attributes in the ELF file.
However when disassembling with -b binary then if you do not get the options
right the disassembler just aborts. This changes it so it just prints how it
was trying to interpret the instruction and prints UNKNOWN instructions next to it.
This way the user has an idea of what's going.
gas/ChangeLog:
* testsuite/gas/arm/undefined-insn-arm.d: New test.
* testsuite/gas/arm/undefined-insn-thumb.d: New test.
* testsuite/gas/arm/undefined-insn.s: New test.
opcodes/ChangeLog:
* arm-dis.c (UNKNOWN_INSTRUCTION_32BIT): Format specifier for arm mode.
(UNKNOWN_INSTRUCTION_16BIT): Format specifier for thumb mode.
(print_insn_arm, print_insn_thumb16, print_insn_thumb32): Use them.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the instruction SB. This instruction is
retrospectively made optional for all versions of the architecture
from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a
new "+sb" for older archtectures.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_SB): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default.
*** opcodes/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (arm_opcodes): Add sb.
(thumb32_opcodes): Likewise.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_sb): New.
(insns): Add new sb instruction.
(arm_extensions): Add "sb".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/sb-bad.d: New test.
* testsuite/gas/arm/sb-bad.l: New test.
* testsuite/gas/arm/sb-thumb1.d: New test.
* testsuite/gas/arm/sb-thumb2.d: New test.
* testsuite/gas/arm/sb.s: New test.
* testsuite/gas/arm/sb1.d: New test.
* testsuite/gas/arm/sb2.d: New test.
See:
https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/download-the-whitepaper
opcodes * arm-dis.c (arm_opcodes): Add ssbb and pssbb and move
csdb together with them.
(thumb32_opcodes): Likewise.
gas * config/tc-arm.c (insns): Add new ssbb and pssbb instructions.
* testsuite/gas/arm/csdb.s: Add new tests for ssbb and pssbb.
* testsuite/gas/arm/csdb.d: Likewise
* testsuite/gas/arm/thumb2_it_bad.s: Likewise.
* testsuite/gas/arm/thumb2_it_bad.l: Likewise.
* testsuite/gas/arm/barrier.d: Update with ssbb.
* testsuite/gas/arm/barrier-thumb.d: Likewise.
Implement MIPS target support for passing options to the disassembler,
complementing commit 65b48a8140 ("GDB: Add support for the new
set/show disassembler-options commands.").
This includes options that expect an argument, so adjust the generic
code and data structures used so as to handle such options. So as to
give backends syntax flexibility no specific delimiter has been defined
to separate options from their respective arguments, so it has to be
included as the last character of the option name. Completion code
however has not been adjusted and consequently option arguments cannot
be completed at this time.
Also the MIPS target has non-empty defaults for the options, so that ABI
names for the general-purpose registers respect our `set mips abi ...'
setting rather than always being determined from the ELF headers of the
binary file selected. Handle these defaults as implicit options, never
shown to the user and always prepended to the user-specified options, so
that the latters can override the defaults.
The resulting output for the MIPS target is as follows:
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
no-aliases Use canonical instruction forms.
msa Recognize MSA instructions.
virt Recognize the virtualization ASE instructions.
xpa Recognize the eXtended Physical Address (XPA) ASE
instructions.
ginv Recognize the Global INValidate (GINV) ASE instructions.
gpr-names=ABI Print GPR names according to specified ABI.
Default: based on binary being disassembled.
fpr-names=ABI Print FPR names according to specified ABI.
Default: numeric.
cp0-names=ARCH Print CP0 register names according to specified architecture.
Default: based on binary being disassembled.
hwr-names=ARCH Print HWR names according to specified architecture.
Default: based on binary being disassembled.
reg-names=ABI Print GPR and FPR names according to specified ABI.
reg-names=ARCH Print CP0 register and HWR names according to specified
architecture.
For the options above, the following values are supported for "ABI":
numeric 32 n32 64
For the options above, the following values are supported for "ARCH":
numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600
r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000
r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64
mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e
loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp
(gdb)
which corresponds to what `objdump --help' used to print for the MIPS
target, with minor formatting changes, most notably option argument
lists being wrapped, but also the amount of white space separating
options from the respective descriptions. The relevant part the new
code is now also used by `objdump --help', which means these formatting
changes apply to both outputs, except for argument list wrapping, which
is GDB-specific.
This also adds a separating new line between the heading and option
lists where descriptions are provided, hence:
(gdb) set architecture s390:31-bit
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
esa Disassemble in ESA architecture mode
zarch Disassemble in z/Architecture mode
insnlength Print unknown instructions according to length from first two bits
(gdb)
but:
(gdb) set architecture powerpc:common
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl,
821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300,
e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5,
power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge,
ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe,
spe2, titan, vle, vsx
(gdb)
Existing affected target backends have been adjusted accordingly.
This has been verified manually with:
(gdb) set architecture arm
(gdb) set architecture powerpc:common
(gdb) set architecture s390:31-bit
to cause no issues with the `show disassembler-options' and `set
disassembler-options' commands. A test case for the MIPS target has
also been provided, covering the default settings with ABI overrides as
well as disassembler option overrides.
2018-07-02 Maciej W. Rozycki <macro@mips.com>
Simon Marchi <simon.marchi@polymtl.ca>
include/
PR tdep/8282
* dis-asm.h (disasm_option_arg_t): New typedef.
(disasm_options_and_args_t): Likewise.
(disasm_options_t): Add `arg' member, document members.
(disassembler_options_mips): New prototype.
(disassembler_options_arm, disassembler_options_powerpc)
(disassembler_options_s390): Update prototypes.
opcodes/
PR tdep/8282
* mips-dis.c (mips_option_arg_t): New enumeration.
(mips_options): New variable.
(disassembler_options_mips): New function.
(print_mips_disassembler_options): Reimplement in terms of
`disassembler_options_mips'.
* arm-dis.c (disassembler_options_arm): Adapt to using the
`disasm_options_and_args_t' structure.
* ppc-dis.c (disassembler_options_powerpc): Likewise.
* s390-dis.c (disassembler_options_s390): Likewise.
gdb/
PR tdep/8282
* disasm.h (gdb_disassembler): Add
`m_disassembler_options_holder'. member
* disasm.c (get_all_disassembler_options): New function.
(gdb_disassembler::gdb_disassembler): Use it.
(gdb_buffered_insn_length_init_dis): Likewise.
(gdb_buffered_insn_length): Adjust accordingly.
(set_disassembler_options): Handle options with arguments.
(show_disassembler_options_sfunc): Likewise. Add a leading new
line if showing options with descriptions.
(disassembler_options_completer): Adapt to using the
`disasm_options_and_args_t' structure.
* mips-tdep.c (mips_disassembler_options): New variable.
(mips_disassembler_options_o32): Likewise.
(mips_disassembler_options_n32): Likewise.
(mips_disassembler_options_n64): Likewise.
(gdb_print_insn_mips): Don't set `disassembler_options'.
(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove
functions.
(mips_gdbarch_init): Always set `gdbarch_print_insn' to
`gdb_print_insn_mips'. Set `gdbarch_disassembler_options',
`gdbarch_disassembler_options_implicit' and
`gdbarch_valid_disassembler_options'.
* arm-tdep.c (_initialize_arm_tdep): Adapt to using the
`disasm_options_and_args_t' structure.
* gdbarch.sh (disassembler_options_implicit): New `gdbarch'
method.
(valid_disassembler_options): Switch from `disasm_options_t' to
the `disasm_options_and_args_t' structure.
* NEWS: Document `set disassembler-options' support for the MIPS
target.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
gdb/doc/
PR tdep/8282
* gdb.texinfo (Source and Machine Code): Document `set
disassembler-options' support for the MIPS target.
gdb/testsuite/
PR tdep/8282
* gdb.arch/mips-disassembler-options.exp: New test.
* gdb.arch/mips-disassembler-options.s: New test source.