(parse_qfloat_immediate): Disallow integer syntax for floating-point
immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
(parse_neon_mov): Set immisfloat bit for operand if it parsed as a
float.
(neon_cmode_for_move_imm): Reject non-float immediates for float
operands.
(neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (md_begin): Use i386_regtab_size to scan
i386_regtab.
(parse_register): Use i386_regtab_size instead of ARRAY_SIZE
on i386_regtab.
opcodes/
2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.c: Include "libiberty.h".
(i386_regtab): Remove the last entry.
(i386_regtab_size): New.
(i386_float_regtab_size): Likewise.
* i386-opc.h (i386_regtab_size): New.
(i386_float_regtab_size): Likewise.
* config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
(macro_build): Add case '2'.
(macro): Expand M_BALIGN to nop, packrl.ph or balign.
(validate_mips_insn): Add support for balign instruction.
(mips_ip): Handle DSP R2 instructions. Support balign instruction.
(OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
command line options.
(s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
(md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
* doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
.set dspr2, .set nodspr2.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dspr2.s, gas/mips/mips32-dspr2.d: New test for
DSP R2.
* gas/mips/mips.exp: Run new test.
[ include/opcode/Changelog ]
* mips.h (OP_SH_BP, OP_MASK_BP): Add support for balign instruction.
(INSN_DSPR2): Add flag for DSP R2 instructions.
(M_BALIGN): New macro.
[ opcodes/ChangeLog ]
* mips-dis.c (mips_arch_choices): Add DSP R2 support.
(print_insn_args): Add support for balign instruction.
* mips-opc.c (D33): New shortcut for DSP R2 instructions.
(mips_builtin_opcodes): Add DSP R2 instructions.
[ sim/mips/ChangeLog ]
* Makefile.in (IGEN_INCLUDE): Add dsp2.igen.
* configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*):
Add dsp2 to sim_igen_machine.
* configure: Regenerate.
* dsp.igen (do_ph_op): Add MUL support when op = 2.
(do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph.
(mulq_rs.ph): Use do_ph_mulq.
(MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen.
* mips.igen: Add dsp2 model and include dsp2.igen.
(MFHI, MFLO, MTHI, MTLO): Extend these instructions for
for *mips32r2, *mips64r2, *dsp.
(MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions
for *mips32r2, *mips64r2, *dsp2.
* dsp2.igen: New file for MIPS DSP REV 2 ASE.
[ sim/testsuite/sim/mips/ChangeLog ]
* basic.exp: Run the dsp2 test.
* utils-dsp.inc (dspckacc_astio, dspck_tsimm): New macro.
* mips32-dsp2.s: New test.
* config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
(mcf5475_ctrl, mcf5485_ctrl): New.
(m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
(m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
(init_table): Add asid, mmubar, adjust rombar0.
* config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
* config/tc-i386.c: Wrap overly long lines, whitespace fixes.
(process_operands): Move old Seg2ShortForm and Seg3ShortForm
code, and test for these insns using a combination of
opcode_modifier and operand_types.
include/opcode/
* i386.h (i386_optab): Replace all occurrences of Seg2ShortForm
and Seg3ShortFrom with Shortform.
(xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
(map_suffix_reloc_to_operator): New.
(map_operator_to_reloc): New.
(expression_maybe_register): Fix incorrect test of return value from
xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
(xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
gas/
* config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
gas/testsuite/
* gas/arm/thumb2_add.d: Add test for missing operand.
* gas/arm/thumb2_add.s: Ditto.
* archures.c (bfd_mach_cpu32_fido): Rename to bfd_mach_fido.
* bfd-in2.h: Regenerate.
* cpu-m68k.c (arch_info_struct): Use bfd_mach_fido instead of
bfd_mach_cpu32_fido.
(m68k_arch_features): Use fido_a instead of cpu32.
(bfd_m68k_compatible): Reject the combination of Fido and
ColdFire. Accept the combination of CPU32 and Fido with a
warning.
* elf32-m68k.c (elf32_m68k_object_p,
elf32_m68k_merge_private_bfd_data,
elf32_m68k_print_private_bfd_data): Treat Fido as an
architecture by itself.
binutils/
* readelf.c (get_machine_flags): Treat Fido as an architecture
by itself.
gas/
* config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
architecture by itself.
(m68k_ip): Don't issue a warning for tbl instructions on fido.
(m68k_elf_final_processing): Treat Fido as an architecture by
itself.
include/elf/
* m68k.h (EF_M68K_FIDO): New.
(EF_M68K_ARCH_MASK): OR EF_M68K_FIDO.
(EF_M68K_CPU32_FIDO_A, EF_M68K_CPU32_MASK): Remove.
include/opcode/
* m68k.h (m68010up): OR fido_a.
opcodes/
* m68k-opc.c (m68k_opcodes): Replace cpu32 with
cpu32 | fido_a except on tbl instructions.
PR gas/3826
* config/tc-i386.c (register_prefix): New.
(set_intel_syntax): Set set_intel_syntax to "" if register
prefix is needed.
(check_byte_reg): Use register_prefix for error message.
(check_long_reg): Likewise.
(check_qword_reg): Likewise.
(check_word_reg): Likewise.
(do_neon_qshl_imm): Likewise.
(do_neon_rshl): New function. Handle rounding variants of
v{q}shl-by-register.
(insns): Use do_neon_rshl for vrshl, vqrshl.
* config/tc-i386.c (process_operands): Check i.reg_operands
and increment i.operands when adding a register operand.
(build_modrm_byte): Fix 4 operand instruction handling.
* config/tc-i386.c (disp_expressions): Use MAX_MEMORY_OPERANDS
for array size instead of 2.
(im_expressions): Use MAX_IMMEDIATE_OPERANDS for for array size
instead of 2.
(i386_immediate): Update immediate operand overflow error
message.
(i386_displacement): Check displacement operand overflow.
* config/m68k-parse.h (m68k_register): Add CAC and MBB.
* config/tc-m68k.c (fido_ctrl): New.
(m68k_archs): Use fido_ctrl for -mfidoa.
(m68k_cpus): Use fido_ctrl on fido-*-*.
(m68k_ip): Add support for CAC and MBB.
(init_table): Add CAC and MBB.
opcodes/
* m68k-dis.c (print_insn_arg): Add support for cac and mbb.
Delete the code handling large constant for PIC.
Modify some comments.
(score_relax_frag): Decrease insn_addr in certain situation.
(s_score_cprestore): Change .cprestore syntax from ".cprestore offset"
to ".cprestore reg, offset".
2006-12-13 H.J. Lu <hongjiu.lu@intel.com>
PR gas/3712
* config/tc-i386.c (match_template): Use MAX_OPERANDS for the
number of operands. Issue an error if MAX_OPERANDS != 4. Add
the 4th operand check.
gas/testsuite/
2006-12-13 H.J. Lu <hongjiu.lu@intel.com>
PR gas/3712
* gas/i386/inval.s: Add invalid insertq.
* gas/i386/x86-64-inval.s: Likewise.
* gas/i386/inval.l: Updated.
* gas/i386/x86-64-inval.l: Likewise.
Return NULL if symbol name characters follow the register number.
(parse_reg): Use NULL instead of 0 for pointer values. Stop
processing if whatreg returned NULL.
gas/
* config/tc-arm.c (arm_force_relocation): Return 1 for relocs against
function symbols.
gas/testsuite/
* gas/arm/thumbrel.s: New test.
* gas/arm/thumbrel.d: New test.
gas/
* config/tc-arm.c (arm_is_eabi): New function.
* config/tc-arm.h (arm_is_eabi): New prototype.
(THUMB_IS_FUNC): Use ELF function type for EABI objects.
* doc/c-arm.texi (.thumb_func): Update documentation.
* elf32-xtensa.c (elf_xtensa_special_sections): Add .xtensa.info.
gas/
* config/tc-xtensa.c (XSHAL_ABI): Add default definition.
(directive_state): Disable scheduling by default.
(xtensa_add_config_info): New.
(xtensa_end): Call xtensa_add_config_info.
gas/testsuite/
* gas/elf/section2.e-xtensa: New file.
* gas/elf/elf.exp: Use it.
include/
* xtensa-config.h (XSHAL_ABI): New.
(XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New.
ld/
* emultempl/xtensaelf.em (XSHAL_ABI): Add default definition.
(replace_insn_sec_with_prop_sec): Use bfd_make_section_with_flags.
Delete redundant code to set sections flags and alignment.
(xt_config_info_unpack_and_check, check_xtensa_info): New.
(elf_xtensa_after_open): Iterate over input statements instead of
link_info.input_bfds.
(elf_xtensa_before_allocation): Likewise. Call check_xtensa_info for
each input, and write a new .xtensa.info section in the output.
* arm-dis.c (last_is_thumb): Delete.
(enum map_type, last_type): New.
(print_insn_data): New.
(get_sym_code_type): Take MAP_TYPE argument. Check the type of
the right symbol. Handle $d.
(print_insn): Check for mapping symbols even without a normal
symbol. Adjust searching. If $d is found see how much data
to print. Handle data.
gas/
* config/tc-arm.h (md_cons_align): Define.
(mapping_state): New prototype.
* config/tc-arm.c (mapping_state): Make global.
gas/testsuite/
* gas/arm/arm7t.d, gas/arm/neon-ldst-rm.d, gas/arm/thumb2_pool.d,
gas/arm/tls.d: Update for $d support.
* gas/arm/mapshort.d, gas/arm/mapshort.s: New test.
* gas/elf/section2.e-armeabi: Update.
* gas/elf/section2.e-armelf: New file.
* gas/elf/elf.exp: Use it.
ld/testsuite/
* ld-arm/mixed-app.d, ld-arm/tls-app.d, ld-arm/tls-lib.d: Update
for $d support.
* config/tc-m68k.c (m68k_ip): Correct output of cpu aliases.
gas/testsuite/
* gas/m68k/all.exp: Add mcf-trap.
* gas/m68k/mcf-trap.[sd]: New.
opcodes/
* m68k-opc.c (m68k_opcodes): Place trap instructions before set
conditionals. Add tpf coldfire instruction as alias for trapf.
(arm_fix_adjustable) [OBJ_ELF]: Use it on coff targets too.
* gas/arm/local_label_coff.s: New test.
* gas/arm/local_label_coff.d: New test.
* gas/arm/local_label_elf.s: New test.
* gas/arm/local_label_elf.d: New test.
* gas/arm/local_label_wince.s: New test.
* gas/arm/local_label_wince.d: New test.
* config/tc-mips.c (pic_need_relax): Return true for section symbols.
gas/testsuite:
* gas/mips/elf-rel26.s: New test.
* gas/mips/elf-rel26.d: Ditto.
* gas/mips/mips.exp: Run it.
(my_get_expression): Const operand of some instructions can not be symbol in assembly.
(get_insn_class_from_type): Handle instruction type Insn_internal.
(do_macro_ldst_label): Modify inst.type.
(Insn_PIC): Delete.
* score-inst.h (enum score_insn_type): Add Insn_internal.
* tc-score.c (data_op2): The immediate value in lw is 15 bit signed.
* score-dis.c (print_insn): Correct the error code to print correct PCE instruction disassembly.
* bfd/elf64-sparc.c: Add FreeBSD support.
(elf64_sparc_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_sparc_freebsd_vec.
* bfd/config.bfd (sparc64-*-freebsd*): Set targ_defvec to bfd_elf64_sparc_freebsd_vec.
* bfd/configure.in: Add entry for bfd_elf64_sparc_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-sparc.c (md_parse_option): Treat any target starting with elf32-sparc
as a viable target for the -32 switch and any target starting with elf64-sparc as a
viable target for the -64 switch.
(sparc_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64
while for 32-bit ELF flavoured output use ELF_TARGET_FORMAT.
* gas/config/tc-sparc.h (ELF_TARGET_FORMAT, ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf64_sparc_fbsd.sh (OUTPUT_FORMAT): Define as elf64-sparc-freebsd.
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* archures.c: Add definition for bfd_mach_arm_iWMMXt2.
* cpu-arm.c (processors): Add bfd_mach_arm_iWMMXt2.
(arch_info_struct, bfd_arm_update_notes): Likewise.
(architectures): Likewise.
(bfd_arm_merge_machines): Check for iWMMXt2.
* bfd-in2.h: Rebuild.
gas/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* config/tc-arm.c (arm_cext_iwmmxt2): New.
(enum operand_parse_code): New code OP_RIWR_I32z.
(parse_operands): Handle OP_RIWR_I32z.
(do_iwmmxt_wmerge): New function.
(do_iwmmxt_wldstd): Handle iwmmxt2 case where second operand is
a register.
(do_iwmmxt_wrwrwr_or_imm5): New function.
(insns): Mark instructions as RIWR_I32z as appropriate.
Also add torvsc<b,h,w>, wabs<b,h,w>, wabsdiff<b,h,w>,
waddbhus<l,m>, waddhc, waddwc, waddsubhx, wavg4{r}, wmaddu{x,n},
wmadds{x,n}, wmerge, wmiaxy{n}, wmiawxy{n}, wmul<sm,um>{r},
wmulw<um,sm,l>{r}, wqmiaxy{n}, wqmulm{r}, wqmulwm{r}, wsubaddhx.
(md_begin): Handle IWMMXT2.
(arm_cpus): Add iwmmxt2.
(arm_extensions): Likewise.
(arm_archs): Likewise.
gas/testsuite/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* gas/arm/iwmmxt2.s: New file.
* gas/arm/iwmmxt2.d: New file.
include/opcode/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm.h (ARM_CEXT_IWMMXT2, ARM_ARCH_IWMMXT2): Define.
opcodes/
2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Ian Lance Taylor <ian@wasabisystems.com>
Ben Elliston <bje@wasabisystems.com>
* arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
only be used with the default multiply-add operation, so if N is
set, don't bother printing X. Add new iwmmxt instructions.
(IWMMXT_INSN_COUNT): Update.
(iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
with a 'c' suffix.
(print_insn_coprocessor): Check for iWMMXt2. Handle format
specifiers 'r', 'i'.
gas/
* config/tc-arm.c (do_neon_dyadic_if_i): Remove.
(do_neon_dyadic_if_i_d): Avoid setting U bit.
(do_neon_mac_maybe_scalar): Ditto.
(do_neon_dyadic_narrow): Force operand type to NT_integer.
(insns): Remove out of date comments.
gas/testsuite/
* gas/arm/neon-cov.s: Test .u and .s aliases for .i suffixes.
* gas/arm/neon-cov.d: Adjust expected output.
opcodes/
* arm-dis.c (neon_opcode): Fix suffix on VMOVN.
* elf32-xtensa.c (xtensa_get_property_section_name): Delete.
(xtensa_get_property_section): New.
(xtensa_read_table_entries): Use xtensa_get_property_section.
(relax_property_section, xtensa_get_property_predef_flags): Handle
group name suffixes in property section names.
(match_section_group): New.
gas/
* config/tc-xtensa.c (FINI_LITERAL_SECTION_NAME): Delete.
(INIT_LITERAL_SECTION_NAME): Delete.
(lit_state struct): Remove segment names, init_lit_seg, and
fini_lit_seg. Add lit_prefix and current_text_seg.
(init_literal_head_h, init_literal_head): Delete.
(fini_literal_head_h, fini_literal_head): Delete.
(xtensa_begin_directive): Move argument parsing to
xtensa_literal_prefix function.
(xtensa_end_directive): Deallocate lit_prefix field of lit_state.
(xtensa_literal_prefix): Parse the directive argument here and
record it in the lit_prefix field. Remove code to derive literal
section names.
(linkonce_len): New.
(get_is_linkonce_section): Use linkonce_len. Check for any
".gnu.linkonce.*" section, not just text sections.
(md_begin): Remove initialization of deleted lit_state fields.
(xtensa_reorder_segments, xtensa_post_relax_hook): Remove references
to init_literal_head and fini_literal_head.
(xtensa_move_literals): Likewise. Skip literals for .init and .fini
when traversing literal_head list.
(match_section_group): New.
(cache_literal_section): Rewrite to determine the literal section
name on the fly, create the section and return it.
(xtensa_switch_to_literal_fragment): Adjust for cache_literal_section.
(xtensa_switch_to_non_abs_literal_fragment): Likewise.
(xtensa_create_property_segments, xtensa_create_xproperty_segments):
Use xtensa_get_property_section from bfd.
(retrieve_xtensa_section): Delete.
* doc/c-xtensa.texi (Xtensa Options): Fix --text-section-literals
description to refer to plural literal sections and add xref to
the Literal Directive section.
(Literal Directive): Describe new rules for deriving literal section
names. Add footnote for special case of .init/.fini with
--text-section-literals.
(Literal Prefix Directive): Replace old naming rules with xref to the
Literal Directive section.
ld/
* emulparams/elf32xtensa.sh (.xt.prop): Add .xt.prop.*.
* scripttempl/elfxtensa.sc (.text): Add .literal.*.
* config/tc-arm.c (s_arm_unwind_save_mmxwr): Correct condition for
merging with previous long opcode.
gas/testsuite:
* gas/arm/unwind.s: Test not merging iWMMXt register save with
previous long opcode.
* gas/arm/unwind.d, gas/arm/unwind_vxworks.d: Update.
* Makefile.am: Add rules to build pe-arm-wince.lo and pei-arm-wince.lo objects.
* Makefile.in: Regenerate.
* pe-arm-wince.c: New file.
* pei-arm-wince.c: New file.
* pei-arm.c: Remove ARM_WINCE block.
* pe-arm.c: Remove ARM_WINCE block. Rename
bfd_arm_pe_allocate_interworking_sections,
bfd_arm_pe_get_bfd_for_interworking, and
bfd_arm_pe_process_before_allocation to
bfd_armpe_allocate_interworking_sections,
bfd_armpe_get_bfd_for_interworking, and
bfd_armpe_process_before_allocation. Move them before including bfd.h.
* bfd.c: ARM wince bfd format names were renamed. Adjust.
* coff-arm.c [ARM_WINCE]: Adjust so Windows CE doesn't end up with unexpected/conflicting relocs.
* targets.c: The arm-wince-pe target got its own new vector. Adjust.
* config.bfd: Likewise.
* configure.in: Likewise.
* configure: Regenerate.
binutils
* configure.in: Split arm-pe and arm-wince-pe. Build dlltool with -DDLLTOOL_ARM_WINCE for Windows CE case.
* configure: Regenerate.
* dlltool.c: Add support for arm-wince.
gas
* Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
* Makefile.in: Regenerate.
* config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were renamed. Adjust.
ld
* Makefile.am: Split arm-wince into its own emulation.
* Makefile.in: Regenerate.
* configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets.
* pe-dll.c : Define PE_ARCH_arm_wince.
(pe_detail_list): Add PE_ARCH_arm_wince case.
(make_one): Handle PE_ARCH_arm_epoc and PE_ARCH_arm_wince cases.
* emulparams/arm_wince_pe.sh: New file.
* emultempl/pe.em: Handle new TARGET_IS_arm_wince_pe define.
Remap bfd_arm_allocate_interworking_sections, bfd_arm_get_bfd_for_interworking and
bfd_arm_process_before_allocation for arm-pe and arm-wince-pe targets too.
(gld_${EMULATION_NAME}_recognized_file): Handle arm-wince and arm-epoc bfd format names.
to use ARM instructions on non-ARM-supporting cores.
(autoselect_thumb_from_cpu_variant): New function. Switch on Thumb
mode automatically based on cpu variant.
(md_begin): Call above function.
* coff-arm.c (coff_arm_rtype_to_howto) [COFF_WITH_PE]: Handle ARM_SECREL.
(coff_arm_reloc_type_lookup): Map BFD_RELOC_32_SECREL to ARM_SECREL.
* pe-arm.c [COFF_SECTION_ALIGNMENT_ENTRIES]: Define.
* pei-arm.c [TARGET_UNDERSCORE]: Define for ARM_WINCE like in pe-arm.c.
[COFF_SECTION_ALIGNMENT_ENTRIES]: Define.
* config/tc-arm.c: Move "dwarf2dbg.h" inclusion out of OBJ_ELF only block.
(pe_directive_secrel) [TE_PE]: New function.
(md_pseudo_table) [!OBJ_ELF]: Handle 2byte, 4byte, 8byte, file, loc, loc_mark_labels.
[TE_PE]: Handle secrel32.
(output_relax_insn): Remove OBJ_ELF around dwarf2_emit_insn call.
(output_inst): Remove OBJ_ELF around dwarf2_emit_insn call.
(arm_frob_label): Remove OBJ_ELF around dwarf2_emit_label call.
(md_section_align): Only round section sizes here for AOUT targets.
(tc_arm_regname_to_dw2regnum): Move out for OBJ_ELF only block.
(tc_pe_dwarf2_emit_offset): New function.
(md_apply_fix) [TE_PE]: Handle BFD_RELOC_32_SECREL.
(cons_fix_new_arm): Handle O_secrel.
* config/tc-arm.h : Move DWARF2_LINE_MIN_INSN_LENGTH, DWARF2_DEFAULT_RETURN_COLUMN and DWARF2_CIE_DATA_ALIGNMENT out of OBJ_ELF only block.
[TE_PE]: Define O_secrel, TC_DWARF2_EMIT_OFFSET, and declare tc_pe_dwarf2_emit_offset.
* ld-pe/pe.exp: Enable tests on arm-wince-pe.
* ld-pe/secrel.d: Adjust test to work on arm-wince-pe too.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
* config/tc-arm.c (parse_operands): Handle invalid register name
for OP_RIWR_RIWC.
gas/testsuite:
* gas/arm/iwmmxt-bad.s: Test invalid register names for wldrw and
wstrw.
* gas/arm/iwmmxt-bad.l: Update.
* config/tc-arm.c (enum operand_parse_code): Add OP_RIWC_RIWG.
(parse_operands): Handle it.
(insns): Use it for tmcr and tmrc.
gas/testsuite:
* gas/arm/iwmmxt.s: Test tmcr and tmrc with wcgr registers.
* gas/arm/iwmmxt.d: Update.
* bfd/elf64-x86-64.c: Add FreeBSD support.
(elf64_x86_64_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_x86_64_freebsd_vec.
* bfd/config.bfd (x64_64-*-freebsd*): Add bfd_elf64_x86_64_freebsd_vec to the targ_selvecs.
* bfd/configure.in: Add entry for bfd_elf64_x86_64_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-i386.c (md_parse_option): Treat any target starting with elf64_x86_64 as a viable target for the -64 switch.
(i386_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64.
* gas/config/tc-i386.h (ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf_x86_64_fbsd.sh (OUTPUT_FORMAT): Define as elf64-x86-64-freebsd.
bfd/
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* reloc.c: Add BFD_RELOC_ARM_T32_ADD_IMM.
gas/
* tc-arm.c (do_t_add_sub): Use addw/subw when source is PC.
(md_convert_frag): Use correct reloc for add_pc. Use
BFD_RELOC_ARM_T32_ADD_IMM for normal add/sum.
(md_apply_fix): Handle BFD_RELOC_ARM_T32_ADD_IMM.
(arm_force_relocation): Handle BFD_RELOC_ARM_T32_ADD_IMM.
gas/testsuite/
* gas/arm/thumb2_add.d: New test.
* gas/arm/thumb2_add.s: New test.
fixup_segment() to repeat a range check on a value that have already
been checked here.
* gas/sh/basic.exp: Run "too_large" dump test.
* gas/sh/too_large.s: New test file. Check that .byte directives do not
generate a bogus overflow message.
* gas/sh/too_large.s: New test control file.
* doc/as.texi: Fix spelling typo: branchs => branches.
* doc/c-m68hc11.texi: Likewise.
* config/tc-m68hc11.c: Likewise.
Support old spelling of command line switch for backwards compatibility.
2006-06-23 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_arch_tune_set): New.
(cpu_arch_isa): Likewise.
(i386_align_code): Use xchg %ax,%ax for 2 byte nop. Optimize
nops with short or long nop sequences based on -march=/.arch
and -mtune=.
(set_cpu_arch): Set cpu_arch_isa. If cpu_arch_tune_set is 0,
set cpu_arch_tune and cpu_arch_tune_flags.
(md_parse_option): For -march=, set cpu_arch_isa and set
cpu_arch_tune and cpu_arch_tune_flags if cpu_arch_tune_set is
0. Set cpu_arch_tune_set to 1 for -mtune=.
(i386_target_format): Don't set cpu_arch_tune.
gas/testsuite/
2006-06-23 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run nops-1, nops-1-i386, nops-1-i686,
nops-1-merom, nops-2, nops-2-i386, nops-2-merom, x86-64-nops-1,
x86-64-nops-1-k8, x86-64-nops-1-nocona and x86-64-nops-1-merom.
* gas/i386/nops-1.s: New file.
* gas/i386/nops-2.s: Likewise.
* gas/i386/nops-1-i386.d: Likewise.
* gas/i386/nops-1-i686.d: Likewise.
* gas/i386/nops-1-merom.d: Likewise.
* gas/i386/nops-1.d: Likewise.
* gas/i386/nops-2-i386.d: Likewise.
* gas/i386/nops-2-merom.d: Likewise.
* gas/i386/nops-2.d: Likewise.
* gas/i386/x86-64-nops-1.s: Likewise.
* gas/i386/x86-64-nops-1-k8.d: Likewise.
* gas/i386/x86-64-nops-1-merom.d: Likewise.
* gas/i386/x86-64-nops-1-nocona.d: Likewise.
* gas/i386/x86-64-nops-1.d: Likewise.
* gas/i386/sse2.d: Updated to expect xchg %ax,%ax as 2 byte
nop.
* config/tc-arm.c (s_arm_unwind_save_vfp_armv6): New. Parse
a directive saving VFP registers for ARMv6 or later.
(s_arm_unwind_save): Add parameter arch_v6 and call
s_arm_unwind_save_vfp or s_arm_unwind_save_vfp_armv6 as
appropriate.
(md_pseudo_table): Add entry for new "vsave" directive.
* doc/c-arm.texi: Correct error in example for "save"
directive (fstmdf -> fstmdx). Also document "vsave" directive.
to R_ARM_LDC_SB_G{0,1,2} respectively.
bfd/
* bfd-in2.h: Regenerate.
* elf32-arm.c (R_ARM_ALU_PC_G0_NC, R_ARM_ALU_PC_G0,
R_ARM_ALU_PC_G1_NC, R_ARM_ALU_PC_G1, R_ARM_ALU_PC_G2,
R_ARM_LDR_PC_G1, R_ARM_LDR_PC_G2, R_ARM_LDRS_PC_G0,
R_ARM_LDRS_PC_G1, R_ARM_LDRS_PC_G2, R_ARM_LDC_PC_G0,
R_ARM_LDC_PC_G1, R_ARM_LDC_PC_G2, R_ARM_ALU_SB_G0_NC,
R_ARM_ALU_SB_G0, R_ARM_ALU_SB_G1_NC, R_ARM_ALU_SB_G1,
R_ARM_ALU_SB_G2, R_ARM_LDR_SB_G0, R_ARM_LDR_SB_G1,
R_ARM_LDR_SB_G2, R_ARM_LDRS_SB_G0, R_ARM_LDRS_SB_G1,
R_ARM_LDRS_SB_G2, R_ARM_LDC_SB_G0, R_ARM_LDC_SB_G1,
R_ARM_LDC_SB_G2): New relocation types.
(R_ARM_PC13): Rename to AAELF name R_ARM_LDR_PC_G0 and
adjust HOWTO entry to be consistent with R_ARM_LDR_PC_G1
and friends.
(elf32_arm_howto_table_3): Delete; contents merged into
elf32_arm_howto_table_2.
(elf32_arm_howto_from_type): Adjust correspondingly.
(elf32_arm_reloc_map): Extend with the above relocations.
(calculate_group_reloc_mask): New function.
(identify_add_or_sub): New function.
(elf32_arm_final_link_relocate): Support for the above
relocations.
* reloc.c: Add enumeration entries for BFD_RELOC_ARM_...
codes to correspond to the above relocations.
gas/
* config/tc-arm.c (enum parse_operand_result): New.
(struct group_reloc_table_entry): New.
(enum group_reloc_type): New.
(group_reloc_table): New array.
(find_group_reloc_table_entry): New function.
(parse_shifter_operand_group_reloc): New function.
(parse_address_main): New function, incorporating code
from the old parse_address function. To be used via...
(parse_address): wrapper for parse_address_main; and
(parse_address_group_reloc): new function, likewise.
(enum operand_parse_code): New codes OP_SHG, OP_ADDRGLDR,
OP_ADDRGLDRS, OP_ADDRGLDC.
(parse_operands): Support for these new operand codes.
New macro po_misc_or_fail_no_backtrack.
(encode_arm_cp_address): Preserve group relocations.
(insns): Modify to use the above operand codes where group
relocations are permitted.
(md_apply_fix): Handle the group relocations
ALU_PC_G0_NC through LDC_SB_G2.
(tc_gen_reloc): Likewise.
(arm_force_relocation): Leave group relocations for the linker.
(arm_fix_adjustable): Likewise.
gas/testsuite/
* gas/arm/group-reloc-alu.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.d: New test.
* gas/arm/group-reloc-alu-encoding-bad.l: New test.
* gas/arm/group-reloc-alu-encoding-bad.s: New test.
* gas/arm/group-reloc-alu-parsing-bad.d: New test.
* gas/arm/group-reloc-alu-parsing-bad.l: New test.
* gas/arm/group-reloc-alu-parsing-bad.s: New test.
* gas/arm/group-reloc-alu.s: New test.
* gas/arm/group-reloc-ldc.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.d: New test.
* gas/arm/group-reloc-ldc-encoding-bad.l: New test.
* gas/arm/group-reloc-ldc-encoding-bad.s: New test.
* gas/arm/group-reloc-ldc-parsing-bad.d: New test.
* gas/arm/group-reloc-ldc-parsing-bad.l: New test.
* gas/arm/group-reloc-ldc-parsing-bad.s: New test.
* gas/arm/group-reloc-ldc.s: New test.
* gas/arm/group-reloc-ldr.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.d: New test.
* gas/arm/group-reloc-ldr-encoding-bad.l: New test.
* gas/arm/group-reloc-ldr-encoding-bad.s: New test.
* gas/arm/group-reloc-ldr-parsing-bad.d: New test.
* gas/arm/group-reloc-ldr-parsing-bad.l: New test.
* gas/arm/group-reloc-ldr-parsing-bad.s: New test.
* gas/arm/group-reloc-ldr.s: New test.
* gas/arm/group-reloc-ldrs.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.d: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.l: New test.
* gas/arm/group-reloc-ldrs-encoding-bad.s: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.d: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.l: New test.
* gas/arm/group-reloc-ldrs-parsing-bad.s: New test.
* gas/arm/group-reloc-ldrs.s: New test.
ld/testsuite/
* ld-arm/group-relocs-alu-bad.d: New test.
* ld-arm/group-relocs-alu-bad.s: New test.
* ld-arm/group-relocs.d: New test.
* ld-arm/group-relocs-ldc-bad.d: New test.
* ld-arm/group-relocs-ldc-bad.s: New test.
* ld-arm/group-relocs-ldr-bad.d: New test.
* ld-arm/group-relocs-ldr-bad.s: New test.
* ld-arm/group-relocs-ldrs-bad.d: New test.
* ld-arm/group-relocs-ldrs-bad.s: New test.
* ld-arm/group-relocs.s: New test.
* ld-arm/arm-elf.exp: Wire in new tests.
(arm_it): Add uncond_value field. Add isvec and issingle to operand
array.
(arm_reg_type): Add REG_TYPE_VFSD (single or double VFP reg) and
REG_TYPE_NSDQ (single, double or quad vector reg).
(reg_expected_msgs): Update.
(BAD_FPU): Add macro for unsupported FPU instruction error.
(parse_neon_type): Support 'd' as an alias for .f64.
(parse_typed_reg_or_scalar): Support REG_TYPE_VFSD, REG_TYPE_NSDQ
sets of registers.
(parse_vfp_reg_list): Don't update first arg on error.
(parse_neon_mov): Support extra syntax for VFP moves.
(operand_parse_code): Add OP_RVSD, OP_RNSDQ, OP_VRSDLST, OP_RVSD_IO,
OP_RNSDQ_RNSC, OP_RVC_PSR, OP_APSR_RR, OP_oRNSDQ.
(parse_operands): Support isvec, issingle operands fields, new parse
codes above.
(do_vfp_nsyn_mrs, do_vfp_nsyn_msr): New functions. Support VFP mrs,
msr variants.
(do_mrs, do_msr, do_t_mrs, do_t_msr): Add support for above.
(NEON_ENC_TAB): Add vnmul, vnmla, vnmls, vcmp, vcmpz, vcmpe, vcmpez.
(NEON_ENC_SINGLE, NEON_ENC_DOUBLE): Define macros.
(NEON_SHAPE_DEF): New macro. Define table of possible instruction
shapes.
(neon_shape): Redefine in terms of above.
(neon_shape_class): New enumeration, table of shape classes.
(neon_shape_el): New enumeration. One element of a shape.
(neon_shape_el_size): Register widths of above, where appropriate.
(neon_shape_info): New struct. Info for shape table.
(neon_shape_tab): New array.
(neon_type_mask): Add N_F64, N_VFP. Update N_MAX_NONSPECIAL.
(neon_check_shape): Rewrite as...
(neon_select_shape): New function to classify instruction shapes,
driven by new table neon_shape_tab array.
(neon_quad): New function. Return 1 if shape should set Q flag in
instructions (or equivalent), 0 otherwise.
(type_chk_of_el_type): Support F64.
(el_type_of_type_chk): Likewise.
(neon_check_type): Add support for VFP type checking (VFP data
elements fill their containing registers).
(do_vfp_cond_or_thumb): Fill in condition field in ARM mode, or 0xE
in thumb mode for VFP instructions.
(do_vfp_nsyn_opcode): New function. Look up the opcode in argument,
and encode the current instruction as if it were that opcode.
(try_vfp_nsyn): New. If this looks like a VFP instruction with ARGS
arguments, call function in PFN.
(do_vfp_nsyn_add_sub, do_vfp_nsyn_mla_mls, do_vfp_nsyn_mul)
(do_vfp_nsyn_abs_neg, do_vfp_nsyn_ldm_stm, do_vfp_nsyn_ldr_str)
(do_vfp_nsyn_sqrt, do_vfp_nsyn_div, do_vfp_nsyn_nmul)
(do_vfp_nsyn_cmp, nsyn_insert_sp, do_vfp_nsyn_push)
(do_vfp_nsyn_pop, do_vfp_nsyn_cvt, do_vfp_nsyn_cvtz): New functions.
Redirect Neon-syntax VFP instructions to VFP instruction handlers.
(do_neon_dyadic_i_su, do_neon_dyadic_i64_su, do_neon_shl_imm)
(do_neon_qshl_imm, do_neon_logic, do_neon_bitfield)
(neon_dyadic_misc, neon_compare, do_neon_tst, do_neon_qdmulh)
(do_neon_fcmp_absolute, do_neon_step, do_neon_sli, do_neon_sri)
(do_neon_qshlu_imm, neon_move_immediate, do_neon_mvn, do_neon_ext)
(do_neon_rev, do_neon_dup, do_neon_rshift_round_imm, do_neon_trn)
(do_neon_zip_uzp, do_neon_sat_abs_neg, do_neon_pair_long)
(do_neon_recip_est, do_neon_cls, do_neon_clz, do_neon_cnt)
(do_neon_swp): Use neon_select_shape not neon_check_shape. Use
neon_quad.
(vfp_or_neon_is_neon): New function. Call if a mnemonic shared
between VFP and Neon turns out to belong to Neon. Perform
architecture check and fill in condition field if appropriate.
(do_neon_addsub_if_i, do_neon_mac_maybe_scalar, do_neon_abs_neg)
(do_neon_cvt): Add support for VFP variants of instructions.
(neon_cvt_flavour): Extend to cover VFP conversions.
(do_neon_mov): Rewrite to use neon_select_shape. Add support for VFP
vmov variants.
(do_neon_ldr_str): Handle single-precision VFP load/store.
(do_neon_ld_st_interleave, do_neon_ld_st_lane, do_neon_ld_dup): Use
NS_NULL not NS_IGNORE.
(opcode_tag): Add OT_csuffixF for operands which either take a
conditional suffix, or have 0xF in the condition field.
(md_assemble): Add support for OT_csuffixF.
(NCE): Replace macro with...
(NCE_tag, NCE, NCEF): New macros.
(nCE): Replace macro with...
(nCE_tag, nCE, nCEF): New macros.
(insns): Add support for VFP insns or VFP versions of insns msr,
mrs, vsqrt, vdiv, vnmul, vnmla, vnmls, vcmp, vcmpe, vpush, vpop,
vcvtz, vmul, vmla, vmls, vadd, vsub, vabs, vneg, vldm, vldmia,
vldbdb, vstm, vstmia, vstmdb, vldr, vstr, vcvt, vmov. Group shared
VFP/Neon insns together.
* config/tc-mips.c (macro_build): Use INSERT_OPERAND wherew
appropriate.
(mips16_macro_build): Use MIPS16_INSERT_OPERAND where appropriate.
(mips_ip): Make overflowed/underflowed constant arguments in DSP
and MT instructions a fatal error. Use INSERT_OPERAND where
appropriate. Improve warnings for break and wait code overflows.
Use symbolic constant of OP_MASK_COPZ.
(mips16_ip): Use MIPS16_INSERT_OPERAND where appropriate.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips32-dsp.d, gas/mips/mips32-dsp.s, gas/mips/mips32-mt.d,
gas/mips/mips32-mt.s: Remove instructions with invalid arguments.
* gas/mips/mips32-dsp.l, gas/mips/mips32-mt.l: Delete file.
[ include/opcode/ChangeLog ]
* mips.h: Improve description of MT flags.
* config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS): Rename.
(ISA_SUPPORTS_DSP_ASE, ISA_SUPPORTS_MT_ASE, ISA_HAS_64BIT_FPRS,
ISA_HAS_MXHC1): New macros.
(HAVE_32BIT_FPRS): Use ISA_HAS_64BIT_FPRS instead of
ISA_HAS_64BIT_REGS. Formatting fixes. Improved comments.
(mips_cpu_info): Change to use combined ASE/IS_ISA flag.
(MIPS_CPU_IS_ISA, MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP,
MIPS_CPU_ASE_MT, MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX): New defines.
(mips_after_parse_args): Change default handling of float register
size to account for 32bit code with 64bit FP. Better sanity checking
of ISA/ASE/ABI option combinations.
(s_mipsset): Support switching of GPR and FPR sizes via
.set {g,f}p={32,64,default}. Better sanity checking for .set ASE
options.
(mips_elf_final_processing): We should record the use of 64bit FP
registers in 32bit code but we don't, because ELF header flags are
a scarce ressource.
(mips_cpu_info_table): Add ASE flags for CPUs with mandatory ASE
extensions. Add 4ksc, 4kec, 4kem, 4kep, 4ksd, m4kp, 24kec, 24kef,
24kex, 34kc, 34kf, 34kx, 25kf CPU definitions.
(mips_cpu_info_from_isa): Use MIPS_CPU_IS_ISA.
* doc/c-mips.texi: Document .set {g,f}p={32,64,default}. Document
missing -march options. Document .set arch=CPU. Move .set smartmips
to ASE page. Use @code for .set FOO examples.
[ gas/testsuite/Changelog ]
* gas/mips/mips-gp32-fp64-pic.d, mips/mips-gp32-fp64.d,
gas/mips/mips-gp64-fp32-pic.d, gas/mips/mips-gp64-fp32.l,
gas/mips/mips-gp64-fp64.d: Adjust test cases to the changes assembler
output.
* gas/mips/mips-gp32-fp64.l, gas/mips/mips-gp64-fp32-pic.l: New files,
catch assembler warnings.
* elf32-xtensa.c (check_loop_aligned): Fix reversed check for
undefined opcode. Clean up assertions.
(narrow_instruction, widen_instruction): Remove "do_it" parameters.
Factor most of the code into separate functions....
(can_narrow_instruction, can_widen_instruction): New.
(prev_instr_is_a_loop): New.
(compute_ebb_proposed_actions): Combine error handling code for
decode errors. Replace call to insn_decode_len with inline code.
Use can_narrow_instruction and can_widen_instruction. Handle errors
from call to xtensa_opcode_is_loop.
(relax_section): Adjust calls to narrow_instruction and
widen_instruction.
gas:
* config/tc-xtensa.c (is_direct_call_opcode, is_branch_jmp_to_next,
xg_assemble_vliw_tokens, xtensa_mark_narrow_branches,
xtensa_fix_short_loop_frags, is_local_forward_loop, relax_frag_immed):
Handle errors from calls to xtensa_opcode_is_* functions.
* config/tc-mips.c (macro_build): Test for currently active
mips16 option.
(mips16_ip): Reject invalid opcodes.
[ opcodes/ChangeLog ]
* mips16-opc.c (I1, I32, I64): New shortcut defines.
(mips16_opcodes): Change membership of instructions to their
lowest baseline ISA.
[ gas/testsuite/ChangeLog ]
* gas/mips/mips.exp: Run new tests.
* gas/mips/mips16e.s, gas/mips/mips16e.d, gas/mips/mips16e-64.s,
gas/mips/mips16e-64.d, gas/mips/mips16e-64.l: New tests.
gas/
* config/tc-arm.c (arm_fix_adjustable): Return 0 for function symbols.
gas/testsuite/
* gas/arm/local_function.d: New test.
* gas/arm/local_function.s: New test.
* config/tc-mips.c (append_insn): Don't check the range of j or
jal addresses.
[ gas/testsuite/ChangeLog ]
* gas/mips/jal-range.l: Don't check the range of j or jal
addresses.
* config/tc-mips.c (append_insn): Only warn about an out-of-range
j or jal address.
[ gas/testsuite/ChangeLog ]
* gas/mips/jal-range.l: Only warn about an out-of-range j or jal
address.
symbols which are not going to be placed into the symbol table.
* coffcode.h (coff_write_relocs): Produce an error message if a an
out-of-range symbol index is detected in a reloc.
checking.
(do_neon_mov): Enable several VMOV variants for VFP. Add suitable
architecture version checks.
(insns): Allow overlapping instructions to be used in VFP mode.
here.
(md_apply_fix3): Multiply offset by 4 here for
BFD_RELOC_ARM_CP_OFF_IMM_S2 and BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.
testsuite:
* gas/arm/iwmmxt.s: Increase offsets for wstrb and wstrh.
* gas/arm/iwmmxt.d: Update expected results.
* gas/arm/iwmmxt-bad2.s: Test wstrb, wstrh, wldrb and wldrh.
* gas/arm/iwmmxt-bad2.l: Update expected error messages.
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* config/tc-mips.c (validate_mips_insn): Handling of udi cases.
(mips_immed): New table that records various handling of udi
instruction patterns.
(mips_ip): Adds udi handling.
[ include/opcode/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips.h: Defines udi bits and masks. Add description of
characters which may appear in the args field of udi
instructions.
[ opcodes/ChangeLog ]
2006-04-30 Thiemo Seufer <ths@mips.com>
David Ung <davidu@mips.com>
* mips-opc.c (mips_builtin_opcodes): Add udi instructions
"udi0" to "udi15".
* mips-dis.c (print_insn_args): Adds udi argument handling.
(is_quarter_float): Rename from above. Simplify slightly.
(parse_qfloat_immediate): Parse a "quarter precision" floating-point
number.
(parse_neon_mov): Parse floating-point constants.
(neon_qfloat_bits): Fix encoding.
(neon_cmode_for_move_imm): Tweak to use floating-point encoding in
preference to integer encoding when using the F32 type.
zero-initialising structures containing it will lead to invalid types).
(arm_it): Add vectype to each operand.
(NTA_HASTYPE, NTA_HASINDEX): Constants used in neon_typed_alias
defined field.
(neon_typed_alias): New structure. Extra information for typed
register aliases.
(reg_entry): Add neon type info field.
(arm_reg_parse): Remove RTYPE argument (revert to previous arguments).
Break out alternative syntax for coprocessor registers, etc. into...
(arm_reg_alt_syntax): New function. Alternate syntax handling broken
out from arm_reg_parse.
(parse_neon_type): Move. Return SUCCESS/FAIL.
(first_error): New function. Call to ensure first error which occurs is
reported.
(parse_neon_operand_type): Parse exactly one type.
(NEON_ALL_LANES, NEON_INTERLEAVE_LANES): Move.
(parse_typed_reg_or_scalar): New function. Handle core of both
arm_typed_reg_parse and parse_scalar.
(arm_typed_reg_parse): Parse a register with an optional type.
(NEON_SCALAR_REG, NEON_SCALAR_INDEX): Extract parts of parse_scalar
result.
(parse_scalar): Parse a Neon scalar with optional type.
(parse_reg_list): Use first_error.
(parse_vfp_reg_list): Use arm_typed_reg_parse instead of arm_reg_parse.
(neon_alias_types_same): New function. Return true if two (alias) types
are the same.
(parse_neon_el_struct_list): Use parse_typed_reg_or_scalar. Return type
of elements.
(insert_reg_alias): Return new reg_entry not void.
(insert_neon_reg_alias): New function. Insert type/index information as
well as register for alias.
(create_neon_reg_alias): New function. Parse .dn/.qn directives and
make typed register aliases accordingly.
(s_dn, s_qn): New functions. Handle incorrectly used .dn/.qn at start
of line.
(s_unreq): Delete type information if present.
(s_arm_unwind_save_mmxwr): Remove arg 3 from arm_reg_parse calls.
(s_arm_unwind_save_mmxwcg): Likewise.
(s_arm_unwind_movsp): Likewise.
(s_arm_unwind_setfp): Likewise.
(parse_shift): Likewise.
(parse_shifter_operand): Likewise.
(parse_address): Likewise.
(parse_tb): Likewise.
(tc_arm_regname_to_dw2regnum): Likewise.
(md_pseudo_table): Add dn, qn.
(parse_neon_mov): Handle typed operands.
(parse_operands): Likewise.
(neon_type_mask): Add N_SIZ.
(N_ALLMODS): New macro.
(neon_check_shape): Fix typo in NS_DDD_QQQ case. Use first_error.
(el_type_of_type_chk): Add some safeguards.
(modify_types_allowed): Fix logic bug.
(neon_check_type): Handle operands with types.
(neon_three_same): Remove redundant optional arg handling.
(do_neon_dyadic_i64_su, do_neon_shl_imm, do_neon_qshl_imm)
(do_neon_logic, do_neon_qdmulh, do_neon_fcmp_absolute)
(do_neon_step): Adjust accordingly.
(neon_cmode_for_logic_imm): Use first_error.
(do_neon_bitfield): Call neon_check_type.
(neon_dyadic): Rename to...
(neon_dyadic_misc): ...this. New name for neon_dyadic. Add bitfield
to allow modification of type of the destination.
(do_neon_dyadic_if_su, do_neon_dyadic_if_i, do_neon_dyadic_if_i_d)
(do_neon_addsub_if_i, do_neon_mul): Adjust accordingly.
(do_neon_compare): Make destination be an untyped bitfield.
(neon_scalar_for_mul): Use NEON_SCALAR_REG, NEON_SCALAR_INDEX.
(neon_mul_mac): Return early in case of errors.
(neon_move_immediate): Use first_error.
(neon_mac_reg_scalar_long): Fix type to include scalar.
(do_neon_dup): Likewise.
(do_neon_mov): Likewise (in several places).
(do_neon_tbl_tbx): Fix type.
(do_neon_ld_st_interleave, neon_alignment_bit, do_neon_ld_st_lane)
(do_neon_ld_dup): Exit early in case of errors and/or use
first_error.
(opcode_lookup): Update for parse_neon_type returning SUCCESS/FAIL.
Handle .dn/.qn directives.
(REGDEF): Add zero for reg_entry neon field.
(fpu_arch_vfp_v3, fpu_vfp_ext_v3, fpu_neon_ext_v1)
(fpu_vfp_v3_or_neon_ext): Declare constants.
(neon_el_type): New enumeration of types for Neon vector elements.
(neon_type_el): New struct. Define type and size of a vector element.
(NEON_MAX_TYPE_ELS): Define constant. The maximum number of types per
instruction.
(neon_type): Define struct. The type of an instruction.
(arm_it): Add 'vectype' for the current instruction.
(isscalar, immisalign, regisimm, isquad): New predicates for operands.
(vfp_sp_reg_pos): Rename to...
(vfp_reg_pos): ...this, and add VFP_REG_Dd, VFP_REG_Dm, VFP_REG_Dn
tags.
(arm_reg_type): Add REG_TYPE_NQ (Neon Q register) and REG_TYPE_NDQ
(Neon D or Q register).
(reg_expected_msgs): Sync with above. Allow VFD to mean VFP or Neon D
register.
(GE_OPT_PREFIX_BIG): Define constant, for use in...
(my_get_expression): Allow above constant as argument to accept
64-bit constants with optional prefix.
(arm_reg_parse): Add extra argument to return the specific type of
register in when either a D or Q register (REG_TYPE_NDQ) is
requested. Can be NULL.
(parse_scalar): New function. Parse Neon scalar (vector reg and index).
(parse_reg_list): Update for new arm_reg_parse args.
(parse_vfp_reg_list): Allow parsing of Neon D/Q register lists.
(parse_neon_el_struct_list): New function. Parse element/structure
register lists for VLD<n>/VST<n> instructions.
(s_arm_unwind_save_vfp): Update for new parse_vfp_reg_list args.
(s_arm_unwind_save_mmxwr): Likewise.
(s_arm_unwind_save_mmxwcg): Likewise.
(s_arm_unwind_movsp): Likewise.
(s_arm_unwind_setfp): Likewise.
(parse_big_immediate): New function. Parse an immediate, which may be
64 bits wide. Put results in inst.operands[i].
(parse_shift): Update for new arm_reg_parse args.
(parse_address): Likewise. Add parsing of alignment specifiers.
(parse_neon_mov): Parse the operands of a VMOV instruction.
(operand_parse_code): Add OP_RND, OP_RNQ, OP_RNDQ, OP_RNSC, OP_NRDLST,
OP_NSTRLST, OP_NILO, OP_RNDQ_I0, OP_RR_RNSC, OP_RNDQ_RNSC, OP_RND_RNSC,
OP_VMOV, OP_RNDQ_IMVNb, OP_RNDQ_I63b, OP_I0, OP_I16z, OP_I32z, OP_I64,
OP_I64z, OP_oI32b, OP_oRND, OP_oRNQ, OP_oRNDQ.
(parse_operands): Handle new codes above.
(encode_arm_vfp_sp_reg): Rename to...
(encode_arm_vfp_reg): ...this. Handle D regs (0-31) too. Complain if
selected VFP version only supports D0-D15.
(do_vfp_sp_monadic, do_vfp_sp_dyadic, do_vfp_sp_compare_z)
(do_vfp_dp_sp_cvt, do_vfp_reg_from_sp, do_vfp_reg2_from_sp2)
(do_vfp_sp_from_reg, do_vfp_sp2_from_reg2, do_vfp_sp_ldst)
(do_vfp_dp_ldst, vfp_sp_ldstm, vfp_dp_ldstm): Update for new
encode_arm_vfp_reg name, and allow 32 D regs.
(do_vfp_dp_rd_rm, do_vfp_dp_rn_rd, do_vfp_dp_rd_rn, do_vfp_dp_rd_rn_rm)
(do_vfp_rm_rd_rn): New functions to encode VFP insns allowing 32 D
regs.
(do_vfp_sp_const, do_vfp_dp_const, vfp_conv, do_vfp_sp_conv_16)
(do_vfp_dp_conv_16, do_vfp_sp_conv_32, do_vfp_dp_conv_32): Handle
constant-load and conversion insns introduced with VFPv3.
(neon_tab_entry): New struct.
(NEON_ENC_TAB): Bit patterns for overloaded Neon instructions, and
those which are the targets of pseudo-instructions.
(neon_opc): Enumerate opcodes, use as indices into...
(neon_enc_tab): ...this. Hold data from NEON_ENC_TAB.
(NEON_ENC_INTEGER, NEON_ENC_ARMREG, NEON_ENC_POLY, NEON_ENC_FLOAT)
(NEON_ENC_SCALAR, NEON_ENC_IMMED, NEON_ENC_INTERLV, NEON_ENC_LANE)
(NEON_ENC_DUP): Define meaningful helper macros to look up values in
neon_enc_tab.
(neon_shape): Enumerate shapes (permitted register widths, etc.) for
Neon instructions.
(neon_type_mask): New. Compact type representation for type checking.
(N_SU_ALL, N_SU_32, N_SU_16_64, N_SUF_32, N_I_ALL, N_IF_32): Common
permitted type combinations.
(N_IGNORE_TYPE): New macro.
(neon_check_shape): New function. Check an instruction shape for
multiple alternatives. Return the specific shape for the current
instruction.
(neon_modify_type_size): New function. Modify a vector type and size,
depending on the bit mask in argument 1.
(neon_type_promote): New function. Convert a given "key" type (of an
operand) into the correct type for a different operand, based on a bit
mask.
(type_chk_of_el_type): New function. Convert a type and size into the
compact representation used for type checking.
(el_type_of_type_ckh): New function. Reverse of above (only when a
single bit is set in the bit mask).
(modify_types_allowed): New function. Alter a mask of allowed types
based on a bit mask of modifications.
(neon_check_type): New function. Check the type of the current
instruction against the variable argument list. The "key" type of the
instruction is returned.
(neon_dp_fixup): New function. Fill in and modify instruction bits for
a Neon data-processing instruction depending on whether we're in ARM
mode or Thumb-2 mode.
(neon_logbits): New function.
(neon_three_same, neon_two_same, do_neon_dyadic_i_su)
(do_neon_dyadic_i64_su, neon_imm_shift, do_neon_shl_imm)
(do_neon_qshl_imm, neon_cmode_for_logic_imm, neon_bits_same_in_bytes)
(neon_squash_bits, neon_is_quarter_float, neon_qfloat_bits)
(neon_cmode_for_move_imm, neon_write_immbits, neon_invert_size)
(do_neon_logic, do_neon_bitfield, neon_dyadic, do_neon_dyadic_if_su)
(do_neon_dyadic_if_su_d, do_neon_dyadic_if_i, do_neon_dyadic_if_i_d)
(do_neon_addsub_if_i, neon_exchange_operands, neon_compare)
(do_neon_cmp, do_neon_cmp_inv, do_neon_ceq, neon_scalar_for_mul)
(neon_mul_mac, do_neon_mac_maybe_scalar, do_neon_tst, do_neon_mul)
(do_neon_qdmulh, do_neon_fcmp_absolute, do_neon_fcmp_absolute_inv)
(do_neon_step, do_neon_abs_neg, do_neon_sli, do_neon_sri)
(do_neon_qshlu_imm, do_neon_qmovn, do_neon_qmovun)
(do_neon_rshift_sat_narrow, do_neon_rshift_sat_narrow_u, do_neon_movn)
(do_neon_rshift_narrow, do_neon_shll, neon_cvt_flavour, do_neon_cvt)
(neon_move_immediate, do_neon_mvn, neon_mixed_length)
(do_neon_dyadic_long, do_neon_abal, neon_mac_reg_scalar_long)
(do_neon_mac_maybe_scalar_long, do_neon_dyadic_wide, do_neon_vmull)
(do_neon_ext, do_neon_rev, do_neon_dup, do_neon_mov)
(do_neon_rshift_round_imm, do_neon_movl, do_neon_trn, do_neon_zip_uzp)
(do_neon_sat_abs_neg, do_neon_pair_long, do_neon_recip_est)
(do_neon_cls, do_neon_clz, do_neon_cnt, do_neon_swp, do_neon_tbl_tbx)
(do_neon_ldm_stm, do_neon_ldr_str, do_neon_ld_st_interleave)
(neon_alignment_bit, do_neon_ld_st_lane, do_neon_ld_dup)
(do_neon_ldx_stx): New functions. Neon bit encoding and encoding
helpers.
(parse_neon_type): New function. Parse Neon type specifier.
(opcode_lookup): Allow parsing of Neon type specifiers.
(REGNUM2, REGSETH, REGSET2): New macros.
(reg_names): Add new VFPv3 and Neon registers.
(NUF, nUF, NCE, nCE): New macros for opcode table.
(insns): More VFP registers allowed in fcpyd, fmdhr, fmdlr, fmrdh,
fmrdl, fabsd, fnegd, fsqrtd, faddd, fsubd, fmuld, fdivd, fmacd, fmscd,
fnmuld, fnmacd, fnmscd, fcmpd, fcmpzd, fcmped, fcmpezd, fmdrr, fmrrd.
Add Neon instructions vaba, vhadd, vrhadd, vhsub, vqadd, vqsub, vrshl,
vqrshl, vshl, vqshl{u}, vand, vbic, vorr, vorn, veor, vbsl, vbit, vbif,
vabd, vmax, vmin, vcge, vcgt, vclt, vcle, vceq, vpmax, vpmin, vmla,
vmls, vpadd, vadd, vsub, vtst, vmul, vqdmulh, vqrdmulh, vacge, vacgt,
vaclt, vacle, vrecps, vrsqrts, vabs, vneg, v{r}shr, v{r}sra, vsli,
vsri, vqshrn, vq{r}shr{u}n, v{r}shrn, vshll, vcvt, vmov, vmvn, vabal,
vabdl, vaddl, vsubl, vmlal, vmlsl, vaddw, vsubw, v{r}addhn, v{r}subhn,
vqdmlal, vqdmlsl, vqdmull, vmull, vext, vrev64, vrev32, vrev16, vdup,
vmovl, v{q}movn, vzip, vuzp, vqabs, vqneg, vpadal, vpaddl, vrecpe,
vrsqrte, vcls, vclz, vcnt, vswp, vtrn, vtbl, vtbx, vldm, vstm, vldr,
vstr, vld[1234], vst[1234], fconst[sd], f[us][lh]to[sd],
fto[us][lh][sd].
(tc_arm_regname_to_dw2regnum): Update for arm_reg_parse args.
(arm_cpu_option_table): Add Neon and VFPv3 to Cortex-A8.
(arm_option_cpu_value): Add vfp3 and neon.
(aeabi_set_public_attributes): Support VFPv3 and NEON attributes. Fix
VFPv1 attribute.
syntax instead of hardcoded opcodes with ".w18" suffixes.
(wide_branch_opcode): New.
(build_transition): Use it to check for wide branch opcodes with
either ".w18" or ".w15" suffixes.
symbols in RELAX[_CHECK]_ALIGN_NEXT_OPCODE frags.
(xtensa_fix_close_loop_end_frags): Use the recorded values instead of
decoding the loop instructions. Remove current_offset variable.
(xtensa_fix_short_loop_frags): Likewise.
(min_bytes_to_other_loop_end): Remove current_offset argument.
* config/bfin-lex.l: Recognize GOT17M4 and FUNCDESC_GOT17M4.
* config/bfin-parse.y: Include "libbfd.h", "elf/common.h" and
"elf/bfin.h".
(GOT17M4, FUNCDESC_GOT17M4): New tokens of type <value>.
(any_gotrel): New rule.
(got): Use it, and create Expr_Node_GOT_Reloc nodes.
* config/tc-bfin.c: Include "libbfd.h", "elf/common.h" and
"elf/bfin.h".
(DEFAULT_FLAGS, bfin_flags, bfin_pic_flag): New.
(bfin_pic_ptr): New function.
(md_pseudo_table): Add it for ".picptr".
(OPTION_FDPIC): New macro.
(md_longopts): Add -mfdpic.
(md_parse_option): Handle it.
(md_begin): Set BFD flags.
(md_apply_fix3, bfin_fix_adjustable): Handle new relocs.
(bfin_gen_ldstidxi): Adjust to match the trees that the parser gives
us for GOT relocs.
* Makefile.am (bfin-parse.o): Update dependencies.
(DEPTC_bfin_elf): Likewise.
* Makefile.in: Regenerate.
* cpu-m68k.c (bfd_m68k_compatible): Treat ISA A+ and ISA B code as
incompatible. Likewise MAC and EMAC code.
* elf32-m68k.c (elf32_m68k_merge_private_bfd_data): Use
bfd_get_compatible to set the new bfd architecture. Rely on it
to detect incompatibilities.
gas/
* config/tc-m68k.c (m68k_cpus): Change cpu_cf5208 entries to use
mcfemac instead of mcfmac.
ld/testsuite/
* ld-m68k/merge-error-1a.s, ld-m68k/merge-error-1b.s,
* ld-m68k/merge-error-1a.d, ld-m68k/merge-error-1b.d,
* ld-m68k/merge-error-1c.d, ld-m68k/merge-error-1d.d,
* ld-m68k/merge-error-1e.d, ld-m68k/merge-ok-1a.d,
* ld-m68k/merge-ok-1b.d: New tests.
* ld-m68k/m68k.exp: Run them.
bfd/ChangeLog:
* reloc.c: Add BFD_RELOC_X86_64_GOT64, BFD_RELOC_X86_64_GOTPCREL64,
BFD_RELOC_X86_64_GOTPC64, BFD_RELOC_X86_64_GOTPLT64,
BFD_RELOC_X86_64_PLTOFF64.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elf64-x86-64.c (x86_64_elf_howto_table): Correct comment.
Add howtos for above relocs.
(x86_64_reloc_map): Add mappings for new relocs.
(elf64_x86_64_check_relocs): R_X86_64_GOT64, R_X86_64_GOTPCREL64,
R_X86_64_GOTPLT64 need a got entry. R_X86_64_GOTPLT64 also a PLT
entry. R_X86_64_GOTPC64 needs a .got section. R_X86_64_PLTOFF64
needs a PLT entry.
(elf64_x86_64_gc_sweep_hook): Reflect changes from
elf64_x86_64_check_relocs for the new relocs.
(elf64_x86_64_relocate_section): Handle new relocs.
gas/ChangeLog:
* config/tc-i386.c (type_names): Correct placement of 'static'.
(reloc): Map some more relocs to their 64 bit counterpart when
size is 8.
(output_insn): Work around breakage if DEBUG386 is defined.
(output_disp): A BFD_RELOC_64 with GOT_symbol as operand also
needs to be mapped to BFD_RELOC_X86_64_GOTPC64 or
BFD_RELOC_X86_64_GOTPC32. Also x86-64 handles pcrel addressing
different from i386.
(output_imm): Ditto.
(lex_got): Recognize @PLTOFF and @GOTPLT. Make @GOT accept also
Imm64.
(md_convert_frag): Jumps can now be larger than 2GB away, error
out in that case.
(tc_gen_reloc): New relocs are passed through. BFD_RELOC_64
and BFD_RELOC_64_PCREL are mapped to BFD_RELOC_X86_64_GOTPC64.
gas/testsuite/ChangeLog:
* gas/i386/reloc64.s: Accept 64-bit forms.
* gas/i386/reloc64.d: Adjust.
* gas/i386/reloc64.l: Adjust.
include/ChangeLog:
* elf/x86-64.h: Add the new relocations with their official
numbers.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
(xtensa_setup_hw_workarounds): Set this new flag for older hardware.
(get_loop_align_size): New.
(xtensa_end): Skip xtensa_mark_narrow_branches when not aligning.
(xtensa_mark_zcl_first_insns): Prevent widening of first loop frag.
(get_text_align_power): Rewrite to handle inputs in the range 2-8.
(get_noop_aligned_address): Use get_loop_align_size.
(get_aligned_diff): Likewise.
gas/
* config/tc-arm.c (BAD_BRANCH, BAD_NOT_IT): Define.
(do_t_branch): Encode branches inside IT blocks as unconditional.
(do_t_cps): New function.
(do_t_blx, do_t_bkpt, do_t_branch23, do_t_bx, do_t_bxj, do_t_cpsi,
do_t_czb, do_t_it, do_t_setend, do_t_tb): Add IT constaints.
(opcode_lookup): Allow conditional suffixes on all instructions in
Thumb mode.
(md_assemble): Advance condexec state before checking for errors.
(insns): Use do_t_cps.
gas/testsuite/
* gas/arm/thumb2_bcond.d: New test.
* gas/arm/thumb2_bcond.s: New test.
* gas/arm/thumb2_it_bad.d: New test.
* gas/arm/thumb2_it_bad.l: New test.
* gas/arm/thumb2_it_bad.s: New test.
* configure.in (bfd_elf32_bigarm_vec): Include elf-vxworks.lo.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerate.
* elf32-arm.c: Include libiberty.h and elf-vxworks.h.
(RELOC_SECTION, RELOC_SIZE, SWAP_RELOC_IN, SWAP_RELOC_OUT): New macros.
(elf32_arm_vxworks_bed): Add forward declaration.
(elf32_arm_howto_table_1): Fix the masks for R_ASM_ABS12.
(elf32_arm_vxworks_exec_plt0_entry): New table.
(elf32_arm_vxworks_exec_plt_entry): Likewise.
(elf32_arm_vxworks_shared_plt_entry): Likewise.
(elf32_arm_link_hash_table): Add vxworks_p and srelplt2 fields.
(reloc_section_p): New function.
(create_got_section): Use RELOC_SECTION.
(elf32_arm_create_dynamic_sections): Likewise. Call
elf_vxworks_create_dynamic_sections for VxWorks targets.
Choose between the two possible values of plt_header_size
and plt_entry_size.
(elf32_arm_link_hash_table_create): Initialize vxworks_p and srelplt2.
(elf32_arm_abs12_reloc): New function.
(elf32_arm_final_link_relocate): Call it. Allow the creation of
dynamic R_ARM_ABS12 relocs on VxWorks. Use reloc_section_p,
RELOC_SIZE, SWAP_RELOC_OUT and RELOC_SECTION. Initialize the
r_addend fields of relocs. On rela targets, skip any code that
adjusts in-place addends. When using _bfd_link_final_relocate
to perform a final relocation, pass rel->r_addend as the addend
argument.
(elf32_arm_merge_private_bfd_data): If one of the bfds is a VxWorks
object, ignore flags that are not standard on VxWorks.
(elf32_arm_check_relocs): Allow the creation of dynamic R_ARM_ABS12
relocs on VxWorks. Use reloc_section_p.
(elf32_arm_adjust_dynamic_symbol): Use RELOC_SECTION and RELOC_SIZE.
(allocate_dynrelocs): Use RELOC_SIZE. Account for the size of
.rela.plt.unloaded relocs on VxWorks targets.
(elf32_arm_size_dynamic_sections): Use RELOC_SIZE. Check for
.rela.plt.unloaded as well as .rel(a).plt. Add DT_RELA* tags
instead of DT_REL* tags on RELA targets.
(elf32_arm_finish_dynamic_symbol): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle VxWorks
PLT entries. Do not make _GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(elf32_arm_finish_dynamic_sections): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle DT_RELASZ
like DT_RELSZ. Handle the VxWorks form of initial PLT entry.
Correct the .rela.plt.unreloaded symbol indexes.
(elf32_arm_output_symbol_hook): Call the VxWorks version of this
hook on VxWorks targets.
(elf32_arm_vxworks_link_hash_table_create): Set vxworks_p to true.
Minor formatting tweak.
(elf32_arm_vxworks_final_write_processing): New function.
(elf_backend_add_symbol_hook): Override for VxWorks and reset
for Symbian.
(elf_backend_final_write_processing): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_want_plt_sym): Likewise.
(ELF_MAXPAGESIZE): Likewise.
(elf_backend_may_use_rel_p): Minor formatting tweak.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_rela_normal): Likewise.
* Makefile.in (elf32-arm.lo): Depend on elf-vxworks.h.
gas/
* config/tc-arm.c (md_apply_fix): Install a value of zero into a
BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
R_ARM_ABS12 reloc.
(tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
gas/testsuite/
* gas/arm/abs12.s, gas/arm/abs12.d: New test.
* gas/arm/pic.d: Skip for *-*-vxworks*...
* gas/arm/pic_vxworks.d: ...use this version instead.
* gas/arm/unwind_vxworks.d: Fix expected output.
ld/
* emulparams/armelf_vxworks.sh: Include vxworks.sh.
(MAXPAGESIZE): Define.
* emulparams/vxworks.sh: Undefine.
* Makefile.am (earmelf_vxworks.c): Depend on vxworks.sh and vxworks.em.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-arm/vxworks1.dd, ld-arm/vxworks1.ld, ld-arm/vxworks1-lib.dd,
* ld-arm/vxworks1-lib.nd, ld-arm/vxworks1-lib.rd,
* ld-arm/vxworks1-lib.s, ld-arm/vxworks1.rd, ld-arm/vxworks1.s,
* ld-arm/vxworks1-static.d, ld-arm/vxworks2.s, ld-arm/vxworks2.sd,
* ld-arm/vxworks2-static.sd: New tests.
* ld-arm/arm-elf.exp: Run them.
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (output_insn): Support Intel Merom New
Instructions.
* gas/config/tc-i386.h (CpuMNI): New.
(CpuUnknownFlags): Add CpuMNI.
gas/testsuite/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Add merom and x86-64-merom.
* gas/i386/merom.d: New file.
* gas/i386/merom.s: Likewise.
* gas/i386/x86-64-merom.d: Likewise.
* gas/i386/x86-64-merom.s: Likewise.
include/opcode/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386.h (i386_optab): Support Intel Merom New Instructions.
opcodes/
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
Intel Merom New Instructions.
(THREE_BYTE_0): Likewise.
(THREE_BYTE_1): Likewise.
(three_byte_table): Likewise.
(dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
THREE_BYTE_1 for entry 0x3a.
(twobyte_has_modrm): Updated.
(twobyte_uses_SSE_prefix): Likewise.
(print_insn): Handle 3-byte opcodes used by Intel Merom New
Instructions.
* config/tc-sparc.c (priv_reg_table): Add entry for "gl".
(hpriv_reg_table): New table for hyperprivileged registers.
(sparc_ip): New cases '$' and '%' for wrhpr/rdhpr hyperprivileged
register encoding.
from 1, not 0, in error messages.
(md_assemble): Simplify special-case check for ENTRY instructions.
(tinsn_has_invalid_symbolic_operands): Do not include opcode and
operand in error message.
fields.
* config/tc-xtensa.h (xtensa_frag_type): Remove slot_sub_symbols field.
* config/tc-xtensa.c (md_apply_fix): Check for unexpected uses of
subtracted symbols.
(relaxation_requirements): Add pfinish_frag argument and use it to
replace setting tinsn->record_fix fields.
(xg_assemble_vliw_tokens): Adjust calls to relaxation_requirements
and vinsn_to_insnbuf. Remove references to record_fix and
slot_sub_symbols fields.
(xtensa_mark_narrow_branches): Delete unused code.
(is_narrow_branch_guaranteed_in_range): Handle expr that is not just
a symbol.
(convert_frag_immed): Adjust vinsn_to_insnbuf call and do not set
record_fix fields.
(tinsn_immed_from_frag): Remove code for handling slot_sub_symbols.
(vinsn_to_insnbuf): Change use of record_fixup argument, replacing use
of the record_fix field. Simplify error messages for unexpected
symbolic operands.
(set_expr_symbol_offset_diff): Delete.
* config/tc-avr.c (mod_index): New union to allow conversion
between pointers and integers.
(md_begin, avr_ldi_expression): Use it.
* config/tc-i370.c (md_assemble): Add cast for argument to print
statement.
* config/tc-tic54x.c (subsym_substitute): Likewise.
* config/tc-mn10200.c (md_assemble): Use a union to convert the
opindex field of fr_cgen structure into a pointer so that it can
be stored in a frag.
* config/tc-mn10300.c (md_assemble): Likewise.
* config/tc-frv.c (frv_debug_tomcat): Use %p to print pointer
types.
* config/tc-v850.c: Replace uses of (int) casts with correct
types.
* gas/tic54x/address.d: Work with 64bit hosts.
* gas/tic54x/addrfar.d: Likewise.
* gas/tic54x/align.d: Likewise.
* gas/tic54x/all-opcodes.d: Likewise.
* gas/tic54x/asg.d: Likewise.
* gas/tic54x/cons.d: Likewise.
* gas/tic54x/consfar.d: Likewise.
* gas/tic54x/extaddr.d: Likewise.
* gas/tic54x/field.d: Likewise.
* gas/tic54x/labels.d: Likewise.
* gas/tic54x/loop.d: Likewise.
* gas/tic54x/lp.d: Likewise.
* gas/tic54x/macro.d: Likewise.
* gas/tic54x/math.d: Likewise.
* gas/tic54x/opcodes.d: Likewise.
* gas/tic54x/sections.d: Likewise.
* gas/tic54x/set.d: Likewise.
* gas/tic54x/struct.d: Likewise.
* gas/tic54x/subsym.d: Likewise.
* xtensa-config.h (XCHAL_HAVE_WIDE_BRANCHES): New.
gas:
* config/tc-xtensa.c (op_placement_info_struct): Delete single,
single_size, widest, and widest_size fields. Add narrowest_slot.
(xg_emit_insn_to_buf): Remove fmt parameter and compute it here.
Use xg_get_single_slot to find the slot.
(finish_vinsn): Use emit_single_op instead of bundle_single_op.
(bundle_single_op): Rename this to....
(bundle_tinsn): ...this function, which builds a vliw_insn but does
not call finish_vinsn.
(emit_single_op): Use bundle_tinsn instead of bundle_single_op.
(relax_frag_immed): Get num_slots from cur_vinsn.
(convert_frag_narrow): Update call to xg_emit_insn_to_buf.
(convert_frag_immed): Likewise. Also, get num_slots from cur_vinsn.
(init_op_placement_info_table): Set narrowest_slot field. Remove
code for deleted fields.
(xg_get_single_size): Return narrowest_size field, not single_size.
(xg_get_single_format): Return narrowest field, not single.
(xg_get_single_slot): New.
(tinsn_to_insnbuf): Rewrite to use tinsn_to_slotbuf.
* config/xtensa-relax.c (widen_spec_list): Add wide branch relaxations.
(transition_applies): Check wide branch option availability.
is_aligning_branch flag.
(find_address_of_next_align_frag): Limit by xtensa_fetch_width.
(future_alignment_required): Except for frags with is_aligning_branch
flag set, call frag_wane for frags that do not need to be reexamined
for aligning.
(relax_frag_immed): Replace orig_vinsn with cur_vinsn to fix a leak.
(convert_frag_immed): Likewise.
(convert_frag_narrow): Check is_aligning_branch flag.
* config/tc-xtensa.h (xtensa_frag_type): Add is_aligning_branch flag.
(xg_init_vinsn): Remove redundant initialization.
(xg_clear_vinsn): Zero all the slots with a single memset.
* config/xtensa-istack.h (vliw_insn): Move insnbuf field after slots.
2005-12-14 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (add_prefix): More fine-grained handling of
REX prefixes. Or new prefix value into i.prefix instead of
assigning.
gas/testsuite/
2005-12-14 Jan Beulich <jbeulich@novell.com>
* gas/i386/rex.[sd]: New.
* gas/i386/i386.exp: Run new test.
* config/tc-hppa.c (hppa_fix_adjustable): Don't reject for reduction
R_HPPA relocations that are 32-bits wide.
* gas/all/redef2.d: Allow "$DATA$" as well as ".data" in matches.
* gas/all/weakref1.d: Allow "$CODE$" as well as ".text" in matches.
* gas/hppa/reloc/reloc.exp: Adjust regexp for new output.
* config/tc-arm.c (s_arm_unwind_save_core): Don't emit an extra
opcode if r4-r15 are not saved.
gas/testsuite/
* gas/arm/unwind.s, gas/arm/unwind.d, gas/arm/unwind_vxworks.d: Add
a test for saving only the low registers.
2005-11-14 Jan Beulich <jbeulich@novell.com>
* config/tc-ia64.c (md): Rename regsym to indregsym and move
it to the end of the structure.
(ar): Field regnum is unsigned.
(cr): Likewise:
(indirect_reg): Likewise.
(declare_register_set): Parameter regnum is unsigned.
(declare_register): Parameter numregs and base_regnum are
unsigned. So is the local loop variable.
(md_begin): Restrict scope of local variable regnum, which
also is unsigned. Replace loops with function calls where
possible. Re-order things so that register groups are kept
together. Remove all uses of regsym except for indirect
registers. Replace use of regsym by indregsym for indirect
registers.
(ia64_optimize_expr): Replace use of regsym by indregsym for
indirect registers, with appropriate bias.
instructions. Define MIPS16_ALL_ARGS and MIPS16_ALL_STATICS for
save/restore encoding of the args field.
* mips16-opc.c: Add MIPS16e save/restore opcodes.
* mips-dis.c (print_mips16_insn_arg): Handle printing of 'm'/'M'
codes for save/restore.
* config/tc-mips.c (mips16_ip): Add handling of 'm' and 'M' codes
for the MIPS16e save/restore instructions.
* gas/mips/mips.exp: Run new save/restore tests.
* gas/testsuite/gas/mips/mips16e-save.s: New test for generating
different styles of save/restore instructions.
* gas/testsuite/gas/mips/mips16e-save.d: New.
(arm_reg_parse_multi): Return NULL rather than FAIL.
(arm_reg_parse): Fix comment, the function returns FAIL rather than NULL if
it is unable to parse the register name.
(do_ldrex): Use BAD_ADDR_MODE.
Change error message for PC-relative addressing.
(do_strex): Likewise.
(do_t_ldrex): Use BAD_ADDR_MODE.
(do_t_strex): Likewise.
* gas/arm/archv6t2-bad.s: Add tests of badly composed ldrex and strex
instructions.
* gas/arm/archv6t2-bad.l: Add expected error messages.
* gas/arm/r15-bad.l: Adjust error messages for r15 usage in ldrex and strex
instructions.
* config/obj-coff.c (obj_coff_section): Set readonly flag with the 'x'
attribute. Remember the actions of the 'w' and 'n' attributes and do not
allow the 'x','s' or 'd' attributes to change them.
Contribute the following change:
2005-09-19 Dave Brolley <brolley@redhat.com>
* config/tc-m32c.c (default_isa): New static variable.
(m32c_isa): Now of type CGEN_BITSET.
(md_begin): Pass &m32c_isa to m32c_cgen_cpu_open.
Bob Wilson
Julian Brown
Paul Brook
H.J. Lu
Mark Shinwell
Alan Modra
Nick Clifton
Andreas Schwab
Kazu Hirata
Daniel Jacobowitz
Martin Schwidefsky
Thiemo Seufer
Nathan Sidwell
Dave Brolley
DJ Delorie
Mei Ligang
David Daney
Christian Groessler
Eric Botcazou
Randolph Chung
Andrew Stubbs
Mike Frysinger
Joseph Myers
Bernd Schmidt
Richard Sandiford
Michael Meissner
Jim Wilson
Denis Chertykov
Jie Zhang
Ben Elliston
Arnold Metselaar
Andreas Jaeger
Jan-Benedict Glaw
David S. Miller
Alexandre Oliva
Hans-Peter Nilsson
Jan Beulich
Dave Anglin