Various moves come in load and store forms, and just like on the GPR
and FPU sides there would better be only one pattern. In some cases this
is not feasible because the opcodes are too different, but quite a few
cases follow a similar standard scheme. Introduce Opcode_SIMD_FloatD and
Opcode_SIMD_IntD, generalize handling in operand_size_match() (reverse
operand handling there simply needs to match "straight" operand one),
and fix a long standing, but so far only latent bug with when to zap
found_reverse_match.
Also once again drop IgnoreSize where pointlessly applied to templates
touched anyway as well as *word when redundant with Reg*.
2018-08-29 Kito Cheng <kito@andestech.com>
gas/
* config/tc-riscv.c (riscv_subset_supports): New argument:
xlen_required.
(riscv_multi_subset_supports): New function, able to check more
than one extension.
(riscv_ip): Use riscv_multi_subset_supports instead of
riscv_subset_supports.
(riscv_set_arch): Update call-site for riscv_subset_supports.
(riscv_after_parse_args): Likewise.
include/
*opcode/riscv.h (MAX_SUBSET_NUM): New.
(riscv_opcode): Add xlen_requirement field and change type of
subset.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Check XLEN by
riscv_opcode.xlen_requirement.
* riscv-opc.c (riscv_opcodes): Update for struct change.
Partial write %PSR (PWRPSR) is a SPARC V8e option that allows the WRPSR
instruction to only affect the %PSR.ET field. When available it is enabled
by setting the rd field of the WRPSR instruction to a value other than 0.
For Leon processors with support for partial write %PSR (currently GR740
and GR716) the rd value must be 1.
opcodes/ChangeLog:
2018-08-29 Martin Aberg <maberg@gaisler.com>
* sparc-opc.c (sparc_opcodes): Add Leon specific partial write
psr (PWRPSR) instruction.
gas/ChangeLog:
2018-08-29 Daniel Cederman <cederman@gaisler.com>
* testsuite/gas/sparc/leon.d: New test.
* testsuite/gas/sparc/leon.s: New test.
* testsuite/gas/sparc/sparc.exp: Execute the pwrpsr test.
Most optional operands to powerpc instructions use a default value of
zero, but there are a few exceptions. Those have been handled by
PPC_OPERAND_OPTIONAL_VALUE and an entry in the powerpc_operands table
for the default value, smuggled in the shift field. This patch
changes that to using the operand extract function to provide non-zero
defaults.
I've also moved the code determining whether optional operands are
provided or omitted, to the point the first optional operand is seen,
and allowed for the possibility of optional base register operands
in a future patch.
The patch does change the error you get on invalid assembly like
ld 3,4
You'll now see "missing operand" rather than
"syntax error; end of line, expected `('".
gas/
* config/tc-ppc.c (md_assemble): Delay counting of optional
operands until one is encountered. Allow for the possibility
of optional base regs, ie. PPC_OPERAND_PARENS. Call
ppc_optional_operand_value with extra args.
include/
* opcode/ppc.h (struct powerpc_operand): Correct "insert" comment.
Mention use of "extract" function to provide default value.
(PPC_OPERAND_OPTIONAL_VALUE): Delete.
(ppc_optional_operand_value): Rewrite to use extract function.
opcodes/
* ppc-dis.c (operand_value_powerpc): Init "invalid".
(skip_optional_operands): Count optional operands, and update
ppc_optional_operand_value call.
* ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg.
(extract_vlensi): Likewise.
(extract_fxm): Return default value for missing optional operand.
(extract_ls, extract_raq, extract_tbr): Likewise.
(insert_sxl, extract_sxl): New functions.
(insert_esync, extract_esync): Remove Power9 handling and simplify.
(powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE
flag and extra entry.
(powerpc_operands <SXL>): Likewise, and use insert_sxl and
extract_sxl.
Bit manipulation instructions which are not normally generated by the
assembler, should nevertheless be decoded by the disassembler.
opcodes/
* s12z-dis.c: BM_RESERVED1 to behave like BM_OPR_REG, and
BM_RESERVED0 like BM_REG_IMM.
opcodes/
* s12z.h: Delete.
* s12z-dis.c: Adjust path of included file.
include/
* opcode/s12z.h: New file.
gas/
* config/tc-s12z.c: Adjust path of included file.
In 64-bit mode, display eiz for address with the addr32 prefix and without
base nor index registers. For
mov -0xccddef(,%eiz,), %rax
disassembler now displays:
67 48 8b 04 25 11 22 33 ff mov -0xccddef(,%eiz,1),%rax
instead of
67 48 8b 04 25 11 22 33 ff addr32 mov 0xffffffffff332211,%rax
gas/
* testsuite/gas/i386/evex-no-scale-64.d: Updated.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.s: Add %eiz tests.
opcodes/
* i386-dis.c (OP_E_memory): In 64-bit mode, display eiz for
address with the addr32 prefix and without base nor index
registers.
There are separate CPUID feature bits for fxsave/fxrstor and cmovCC
instructions. This patch adds CpuCMOV and CpuFXSR to replace Cpu686
on corresponding instructions.
gas/
* config/tc-i386.c (cpu_arch): Add .cmov and .fxsr.
(cpu_noarch): Add nocmov and nofxsr.
* doc/c-i386.texi: Document cmov and fxsr.
opcodes/
* i386-gen.c (cpu_flag_init): Add CpuCMOV and CpuFXSR to
CPU_I686_FLAGS. Add CPU_CMOV_FLAGS, CPU_FXSR_FLAGS,
CPU_ANY_CMOV_FLAGS and CPU_ANY_FXSR_FLAGS.
(cpu_flags): Add CpuCMOV and CpuFXSR.
* i386-opc.tbl: Replace Cpu686 with CpuFXSR on fxsave, fxsave64,
fxrstor and fxrstor64. Replace Cpu686 with CpuCMOV on cmovCC.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
There's no insn allowing ZEROING_MASKING alone. Re-purpose its value for
handling the not uncommon case of insns allowing either form of masking
with register operands, but only merging masking with a memory operand.
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
PowerPC has replaced use of "long" for insns with "int64_t", in
preparation for 64-bit power10 insns.
* ppc-opc.c (insert_sprbat): Correct function parameter and
return type.
(extract_sprbat): Likewise, variable too.
This is a relatively straightforward patch to improve support for the
IBM Gekko and IBM Broadway processors. Broadway is functionally
equivalent to the IBM 750CL, while Gekko's functionality is a subset
of theirs. The patch simplifies this reality and adds -mgekko and
-mbroadway as aliases for -m750cl. I didn't feel it was worth wasting
a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of
simplified mnemonics for special purpose register access. Notably,
Broadway adds 4 additional IBAT and DBAT registers but these are not
assigned sequential SPR numbers.
gas/
* config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway.
* doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* testsuite/gas/ppc/broadway.d,
* testsuite/gas/ppc/broadway.s: New test for broadway.
* testsuite/gas/ppc/ppc.exp: Run new test.
include/
* opcode/ppc.h (PPC_OPCODE_750): Adjust comment.
opcodes/
* ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway.
(powerpc_init_dialect): Handle bfd_mach_ppc_750.
* ppc-opc.c (insert_sprbat, extract_sprbat): New functions to
support disjointed BAT.
(powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR.
(XSPRGQR_MASK, GEKKO, BROADWAY): Define.
(powerpc_opcodes): Add 750cl extended mnemonics for spr access.
Expand Broadcast to 3 bits so that the number of bytes to broadcast
can be computed as 1 << (Broadcast - 1). Use it to simplify x86
assembler.
gas/
* config/tc-i386.c (Broadcast_Operation): Add bytes.
(build_evex_prefix): Use i.broadcast->bytes.
(match_broadcast_size): New function.
(check_VecOperands): Use the broadcast field to compute the
number of bytes to broadcast directly. Set i.broadcast->bytes.
Use match_broadcast_size.
opcodes/
* i386-gen.c (adjust_broadcast_modifier): New function.
(process_i386_opcode_modifier): Add an argument for operands.
Adjust the Broadcast value based on operands.
(output_i386_opcode): Pass operand_types to
process_i386_opcode_modifier.
(process_i386_opcodes): Pass NULL as operands to
process_i386_opcode_modifier.
* i386-opc.h (BYTE_BROADCAST): New.
(WORD_BROADCAST): Likewise.
(DWORD_BROADCAST): Likewise.
(QWORD_BROADCAST): Likewise.
(i386_opcode_modifier): Expand broadcast to 3 bits.
* i386-tbl.h: Regenerated.
Just like for their AVX counterparts and CVTSI2S{D,S}, a memory source
here is ambiguous and hence
- in source files should be qualified with a suitable suffix or operand
size specifier (not doing so is an error in Intel mode, and will gain
a diagnostic in AT&T mode in the future),
- in disassembly should be properly suffixed (the Intel operand size
specifiers were emitted correctly already).
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
The PPA instruction will be emitted by GCC transactional execution
builtins so it needs to be accepted with just -mhtm and without
-march=zEC12.
opcodes/ChangeLog:
2018-07-19 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-opc.txt (PPA): Add the htm flag.
When multiple (here: two) forms of an insn take different width inputs
but produce identical size outputs (here: RegXMM), the templates can be
combined.
Also drop IgnoreSize (and the now redundant size specifiers) wherever
applicable.
These are special because they may not have a register operand to derive
the vector length from, which requires to also deal with the braodcast
case when determining vector length in build_evex_prefix().
Also drop IgnoreSize (and the now redundant size specifiers) from their
suffixed counterparts.
Instead of expanding macro-like constructs in i386-gen, have the C pre-
processor do this for us. Besides being a prerequisite for the next
template folding steps, this also paves the way for removing various
hidden dependencies between #define-s in i386-opc.h and plain literal
numbers used in i386-opc.tbl.
The #undef of None is solely to leave the generated i386-tbl.h entirely
unchanged.
After
commit 1b54b8d7e4
Author: Jan Beulich <jbeulich@novell.com>
Date: Mon Dec 18 09:36:14 2017 +0100
x86: fold RegXMM/RegYMM/RegZMM into RegSIMD
... qualified by their respective sizes, allowing to drop FirstXmm0 at
the same time.
folded RegXMM, RegYMM and RegZMM into RegSIMD, it's no longer impossible
to distinguish if Xmmword can represent a memory reference when operand
specification contains SIMD register. For example, template operands
specification like these
RegXMM|...|Xmmword|...
and
RegXMM|...
The Xmmword bitfield is always set by RegXMM which is represented by
"RegSIMD|Xmmword". This patch splits each of vcvtps2qq, vcvtps2uqq,
vcvttps2qq and vcvttps2uqq into 2 templates: one template only has
RegXMM source operand and the other only has mempry source operand.
gas/
PR gas/23418
* testsuite/gas/i386/xmmword.s: Add tests for vcvtps2qq,
vcvtps2uqq, vcvttps2qq and vcvttps2uqq.
* testsuite/gas/i386/xmmword.l: Updated.
opcodes/
PR gas/23418
* i386-opc.h (Byte): Update comments.
(Word): Likewise.
(Dword): Likewise.
(Fword): Likewise.
(Qword): Likewise.
(Tbyte): Likewise.
(Xmmword): Likewise.
(Ymmword): Likewise.
(Zmmword): Likewise.
* i386-opc.tbl: Split vcvtps2qq, vcvtps2uqq, vcvttps2qq and
vcvttps2uqq.
* i386-tbl.h: Regenerated.
For more details see: https://static.docs.arm.com/ddi0596/a/DDI_0596_ARM_a64_instruction_set_architecture.pdf
opcodes * aarch64-tbl.h (aarch64_opcode_table): Add entry for
ssbb and pssbb and update dsb flags to F_HAS_ALIAS.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
gas * testsuite/gas/aarch64/system.s: Add test for ssbb
and pssbb.
* testsuite/gas/aarch64/system.d: Update accordingly
and remove explicit addresses.
This adds the missing Em16 constraints the rest of the instructions requiring them
and also adds a testcase to test all the instructions so these are checked from
now on.
The Em16 operand constrains the valid registers to the lower 16 registers when used
with a half precision qualifier.
The list has been cross checked (by hand) through the Arm ARM version Ca.
opcodes/
PR binutils/23192
* aarch64-tbl.h (sqdmlal, sqdmlal2, smlsl, smlsl2, sqdmlsl, sqdmlsl2,
mul, smull, smull2, sqdmull, sqdmull2, sqdmulh, sqrdmulh, mla, umlal,
umlal2, mls, umlsl, umlsl2, umull, umull2, sqdmlal, sqdmlsl, sqdmull,
sqdmulh, sqrdmulh): Use Em16.
gas/
PR binutils/23192
* testsuite/gas/aarch64/illegal-by-element.s: New.
* testsuite/gas/aarch64/illegal-by-element.d: New.
* testsuite/gas/aarch64/illegal-by-element.l: New.
See:
https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/download-the-whitepaper
opcodes * arm-dis.c (arm_opcodes): Add ssbb and pssbb and move
csdb together with them.
(thumb32_opcodes): Likewise.
gas * config/tc-arm.c (insns): Add new ssbb and pssbb instructions.
* testsuite/gas/arm/csdb.s: Add new tests for ssbb and pssbb.
* testsuite/gas/arm/csdb.d: Likewise
* testsuite/gas/arm/thumb2_it_bad.s: Likewise.
* testsuite/gas/arm/thumb2_it_bad.l: Likewise.
* testsuite/gas/arm/barrier.d: Update with ssbb.
* testsuite/gas/arm/barrier-thumb.d: Likewise.
Architecturally, MONITOR's and MONITORX'es memory operand is a 16- or
32-bit register outside of 64-bit mode, and a 64- or 32-bit register
inside 64-bit mode. The other register operands, including all of them
for MWAIT and MWAITX, are uniformly 32-bit, irrespective of mode. Retain
the original 64-bit MONITOR{,X} templates for compatibility only, and
fold the MWAIT{,X} ones.
The checking against reg16_inoutportreg can be had with a simple test of
a bit, and the value setting from inoutportreg can be replaced by using
the actual register's reg_type field.
Note that the so far redundant 2nd instance of OPERAND_TYPE_INOUTPORTREG
is left in place, for its use in type_names[].
With its name it should equal to the largest prior enumerator, which is
not very helpful as that will change every once in a while. Rename it to
OTNum instead to make name and value match, and correct use sites to no
longer use one too large a value.
Remove `-Wshadow' compilation errors:
cc1: warnings being treated as errors
.../opcodes/s12z-dis.c: In function 'lea_reg_xys_opr':
.../opcodes/s12z-dis.c:814: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
.../opcodes/s12z-dis.c: In function 'lea_reg_xys':
.../opcodes/s12z-dis.c:843: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
.../opcodes/s12z-dis.c: In function 'print_insn_loop_primitive':
.../opcodes/s12z-dis.c:2206: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
which for versions of GCC before 4.8 prevent support for S12Z targets
from being built. See also GCC PR c/53066.
opcodes/
* s12z-dis.c (lea_reg_xys_opr): Rename `reg' local variable to
`reg_xys'.
(lea_reg_xys): Likewise.
(print_insn_loop_primitive): Rename `reg' local variable to
`reg_dxy'.
The disassembly mask for ldarh incorrectly didn't mask out bit 20 which
is part of the SBO part of the instruction and shouldn't be considered input.
This fixes the wrong bit fixing the disassembly of instructions to
ldarh and makes the behavior consistent.
opcodes/
PR binutils/23242
* aarch64-tbl.h (ldarh): Fix disassembly mask.
The previous constraints were based on information already in opcodes and it
seems that a few of them were wrong. I have now hand verified the ones changed
by the previous patch and corrected where needed.
This prevents a warning to be issued when one shouldn't be.
opcodes/
PR binutils/23369
* aarch64-opc.c (aarch64_sys_regs): Make read/write csselr_el1,
vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1.
gas/testsuite/
PR binutils/23369
* gas/aarch64/msr.d (csselr_el1,
vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1): New.
* gas/aarch64/msr.s: Likewise.
Implement MIPS target support for passing options to the disassembler,
complementing commit 65b48a8140 ("GDB: Add support for the new
set/show disassembler-options commands.").
This includes options that expect an argument, so adjust the generic
code and data structures used so as to handle such options. So as to
give backends syntax flexibility no specific delimiter has been defined
to separate options from their respective arguments, so it has to be
included as the last character of the option name. Completion code
however has not been adjusted and consequently option arguments cannot
be completed at this time.
Also the MIPS target has non-empty defaults for the options, so that ABI
names for the general-purpose registers respect our `set mips abi ...'
setting rather than always being determined from the ELF headers of the
binary file selected. Handle these defaults as implicit options, never
shown to the user and always prepended to the user-specified options, so
that the latters can override the defaults.
The resulting output for the MIPS target is as follows:
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
no-aliases Use canonical instruction forms.
msa Recognize MSA instructions.
virt Recognize the virtualization ASE instructions.
xpa Recognize the eXtended Physical Address (XPA) ASE
instructions.
ginv Recognize the Global INValidate (GINV) ASE instructions.
gpr-names=ABI Print GPR names according to specified ABI.
Default: based on binary being disassembled.
fpr-names=ABI Print FPR names according to specified ABI.
Default: numeric.
cp0-names=ARCH Print CP0 register names according to specified architecture.
Default: based on binary being disassembled.
hwr-names=ARCH Print HWR names according to specified architecture.
Default: based on binary being disassembled.
reg-names=ABI Print GPR and FPR names according to specified ABI.
reg-names=ARCH Print CP0 register and HWR names according to specified
architecture.
For the options above, the following values are supported for "ABI":
numeric 32 n32 64
For the options above, the following values are supported for "ARCH":
numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600
r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000
r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64
mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e
loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp
(gdb)
which corresponds to what `objdump --help' used to print for the MIPS
target, with minor formatting changes, most notably option argument
lists being wrapped, but also the amount of white space separating
options from the respective descriptions. The relevant part the new
code is now also used by `objdump --help', which means these formatting
changes apply to both outputs, except for argument list wrapping, which
is GDB-specific.
This also adds a separating new line between the heading and option
lists where descriptions are provided, hence:
(gdb) set architecture s390:31-bit
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
esa Disassemble in ESA architecture mode
zarch Disassemble in z/Architecture mode
insnlength Print unknown instructions according to length from first two bits
(gdb)
but:
(gdb) set architecture powerpc:common
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl,
821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300,
e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5,
power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge,
ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe,
spe2, titan, vle, vsx
(gdb)
Existing affected target backends have been adjusted accordingly.
This has been verified manually with:
(gdb) set architecture arm
(gdb) set architecture powerpc:common
(gdb) set architecture s390:31-bit
to cause no issues with the `show disassembler-options' and `set
disassembler-options' commands. A test case for the MIPS target has
also been provided, covering the default settings with ABI overrides as
well as disassembler option overrides.
2018-07-02 Maciej W. Rozycki <macro@mips.com>
Simon Marchi <simon.marchi@polymtl.ca>
include/
PR tdep/8282
* dis-asm.h (disasm_option_arg_t): New typedef.
(disasm_options_and_args_t): Likewise.
(disasm_options_t): Add `arg' member, document members.
(disassembler_options_mips): New prototype.
(disassembler_options_arm, disassembler_options_powerpc)
(disassembler_options_s390): Update prototypes.
opcodes/
PR tdep/8282
* mips-dis.c (mips_option_arg_t): New enumeration.
(mips_options): New variable.
(disassembler_options_mips): New function.
(print_mips_disassembler_options): Reimplement in terms of
`disassembler_options_mips'.
* arm-dis.c (disassembler_options_arm): Adapt to using the
`disasm_options_and_args_t' structure.
* ppc-dis.c (disassembler_options_powerpc): Likewise.
* s390-dis.c (disassembler_options_s390): Likewise.
gdb/
PR tdep/8282
* disasm.h (gdb_disassembler): Add
`m_disassembler_options_holder'. member
* disasm.c (get_all_disassembler_options): New function.
(gdb_disassembler::gdb_disassembler): Use it.
(gdb_buffered_insn_length_init_dis): Likewise.
(gdb_buffered_insn_length): Adjust accordingly.
(set_disassembler_options): Handle options with arguments.
(show_disassembler_options_sfunc): Likewise. Add a leading new
line if showing options with descriptions.
(disassembler_options_completer): Adapt to using the
`disasm_options_and_args_t' structure.
* mips-tdep.c (mips_disassembler_options): New variable.
(mips_disassembler_options_o32): Likewise.
(mips_disassembler_options_n32): Likewise.
(mips_disassembler_options_n64): Likewise.
(gdb_print_insn_mips): Don't set `disassembler_options'.
(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove
functions.
(mips_gdbarch_init): Always set `gdbarch_print_insn' to
`gdb_print_insn_mips'. Set `gdbarch_disassembler_options',
`gdbarch_disassembler_options_implicit' and
`gdbarch_valid_disassembler_options'.
* arm-tdep.c (_initialize_arm_tdep): Adapt to using the
`disasm_options_and_args_t' structure.
* gdbarch.sh (disassembler_options_implicit): New `gdbarch'
method.
(valid_disassembler_options): Switch from `disasm_options_t' to
the `disasm_options_and_args_t' structure.
* NEWS: Document `set disassembler-options' support for the MIPS
target.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
gdb/doc/
PR tdep/8282
* gdb.texinfo (Source and Machine Code): Document `set
disassembler-options' support for the MIPS target.
gdb/testsuite/
PR tdep/8282
* gdb.arch/mips-disassembler-options.exp: New test.
* gdb.arch/mips-disassembler-options.s: New test source.
BFD's bfd_get_mach () function returns a bfd specific value representing
the architecture of the target which is populated from the Tag_CPU_arch
build attribute value of that target. Among other users of that
interfacem, objdump which uses it to print the architecture version of
the binary being examinated and to decide what instruction is available
if run with "-m arm" via its own mapping from bfd_mach_arm_X values to
feature bits available.
However, both BFD and objdump's most recent known architecture is
Armv5TE. When encountering a newer architecture bfd_get_mach will return
bfd_mach_arm_unknown. This is unfortunate since objdump uses that value
to allow all instructions on all architectures which is already what it
does by default, making the "-m arm" trick useless.
This patch updates BFD and objdump's knowledge of Arm architecture
versions up to the latest Armv8-M Baseline and Mainline, Armv8-R and
Armv8.4-A architectures. Since several architecture versions (eg. 8.X-A)
share the same Tag_CPU_arch build attribute value and
bfd_mach_arm values, the mapping from bfd machine value to feature bits
need to return the most featureful feature bits that would yield the
given bfd machine value otherwise some instruction would not disassemble
under "-m arm" mode. The patch rework that mapping to make this clearer
and simplify writing the mapping rules. In particular, for simplicity
all FPU instructions are allowed in all cases.
Finally, the patch also rewrite the cpu_arch_ver table in GAS to use the
TAG_CPU_ARCH_X macros rather than hardcode their value.
2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* archures.c (bfd_mach_arm_5TEJ, bfd_mach_arm_6, bfd_mach_arm_6KZ,
bfd_mach_arm_6T2, bfd_mach_arm_6K, bfd_mach_arm_7, bfd_mach_arm_6M,
bfd_mach_arm_6SM, bfd_mach_arm_7EM, bfd_mach_arm_8, bfd_mach_arm_8R,
bfd_mach_arm_8M_BASE, bfd_mach_arm_8M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entries for above new
bfd_mach_arm values.
* elf32-arm.c (bfd_arm_get_mach_from_attributes): Add Tag_CPU_arch to
bfd_mach_arm mapping logic for pre Armv4 and Armv5TEJ and later
architectures. Force assert failure for any new Tag_CPU_arch value.
gas/
* config/tc-arm.c (cpu_arch_ver): Use symbolic TAG_CPU_ARCH macros
rather than hardcode their values.
ld/
* arm-dis.c (select_arm_features): Fix typo in heading comment. Allow
all FPU features and add mapping from new bfd_mach_arm values to
allowed CPU feature bits.
opcodes/
* testsuite/ld-arm/tls-descrelax-be8.d: Add architecture version in
expected result.
* testsuite/ld-arm/tls-descrelax-v7.d: Likewise.
* testsuite/ld-arm/tls-longplt-lib.d: Likewise.
* testsuite/ld-arm/tls-longplt.d: Likewise.
Some instructions in Armv8-a place a limitation on FP16 registers that can be
used as the register from which to select an element from.
e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction
does not apply for all instructions, e.g. fcmla does not have this restriction
as it gets an extra bit from the M field.
Unfortunately, this restriction to S_H was added for all _Em operands before,
meaning for a large number of instructions you couldn't use the full register
file.
This fixes the issue by introducing a new operand _Em16 which applies this
restriction only when paired with S_H and leaves the _Em and the other
qualifiers for _Em16 unbounded (i.e. using the full 5 bit range).
Also the patch updates all instructions that should be affected by this.
opcodes/
PR binutils/23192
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint.
* aarch64-opc.c (operand_general_constraint_met_p,
aarch64_print_operand): Likewise.
* aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal,
smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl,
fmlal2, fmlsl2.
(AARCH64_OPERANDS): Add Em2.
gas/
PR binutils/23192
* config/tc-aarch64.c (process_omitted_operand, parse_operands): Add
AARCH64_OPND_Em16
* testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper
16 registers.
* testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.s: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
* testsuite/gas/aarch64/sve.d: Likewise.
include/
PR binutils/23192
*opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
This patch fixes a disassembly issue with the aliases to subs with a shifted
register. The subs instruction with the zero register as destination is
supposed to alias to cmp and when the first input register is the zero register
the subs is supposed to be aliased to negs.
This means that a subs with destination and first input registers the zero
register is supposed to be a cmp.
This is done by raising the priority of the cmp alias.
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Fix alias flag for negs
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
gas/
* testsuite/gas/aarch64/addsub.s: Add negs to zero reg test.
* testsuite/gas/aarch64/addsub.d: Likewise.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
Detect illegal FMOV instructions that changes the size from 32 bits to 64
bits and vice versa. Add tests for these and other undefined FMOV
instructions.
PR 20319
gas * testsuite/gas/aarch64/illegal-3.s: Test if unallocated FMOV encodings
are detected as undefined.
* testsuite/gas/aarch64/illegal-3.d: Likewise.
* testsuite/gas/aarch64/illegal.s: Test if FMOV instructions that are
changing the size from 32 bits to 64 bits and vice versa trigger an
error.
* testsuite/gas/aarch64/illegal.l: Likewise.
opcodes * aarch64-tbl.h: Introduce QL_INT2FP_FMOV and QL_FP2INT_FMOV.
(aarch64_opcode_table) : Use QL_INT2FP_FMOV and QL_FP2INT_FMOV.
.../opcodes/xtensa-dis.c: In function ‘print_insn_xtensa’:
.../opcodes/xtensa-dis.c:257:17: error: variable ‘fmt’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
xtensa_format fmt;
^~~
.../opcodes/xtensa-dis.c:262:26: error: variable ‘valid_insn’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
int first, first_slot, valid_insn = 0;
^~~~~~~~~~
* xtensa-dis.c (print_insn_xtensa): Init fmt and valid_insn after
setjmp. Move init for some other vars later too.
xtensa disassembler does not use information from the .xt.prop sections
to switch between code/data disassembly in text sections. This may
result in incorrect disassembly when data is interpreted as code and
disassembler loses synchronization with instruction stream. Use .xt.prop
section information to correctly interpret code and data and synchronize
with instruction stream.
2018-06-04 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (xtensa_read_table_entries): Make global.
(compute_fill_extra_space): Drop declaration. Rename function to
xtensa_compute_fill_extra_space.
(compute_ebb_actions, remove_dead_literal): Update references to
compute_fill_extra_space.
include/
* elf/xtensa.h (xtensa_read_table_entries)
(xtensa_compute_fill_extra_space): New declarations.
opcodes/
* xtensa-dis.c (bfd.h, elf/xtensa.h): New includes.
(dis_private): Add new fields for property section tracking.
(xtensa_coalesce_insn_tables, xtensa_find_table_entry)
(xtensa_instruction_fits): New functions.
(fetch_data): Bump minimal fetch size to 4.
(print_insn_xtensa): Make struct dis_private static.
Load and prepare property table on section change.
Don't disassemble literals. Don't disassemble instructions that
cross property table boundaries.
Bump version number to 2.30.52 since _bfd_link_hide_symbol has been added
to bfd_target.
bfd/
* version.m4: Bump version to 2.30.52
* configure: Regenerated.
binutils/
* configure: Regenerated.
gas/
* configure: Regenerated.
gprof/
* configure: Regenerated.
ld/
* configure: Regenerated.
opcodes/
* configure: Regenerated.
First of all there's no point in having separate Cpu386 templates - the
respective SReg3 registers can't be specified for pre-386 anyway; see
parse_real_register().
And then we can also make use of D here for the memory forms of the
insn. This cannot be done for the non-64bit GPR forms because of the
IgnoreSize that cannot be dropped from the to-SREG variant.
This patch regenerates a number of files that either were edited by
hand or not regenerated when s12z support was added to binutils.
bfd/
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
This patch corrects the disassembly masks for by element dot product
instructions. The bit 10 was wrong and supposed to be 1.
This caused incorrect disassembly of instructions in the unallocated space to
disassemble as dot product instructions.
No encoding errors can arrise from this issue.
opcodes/
PR binutils/23109
* aarch64-tbl.h (aarch64_opcode_table): Correct sdot and udot.
* aarch64-dis-2.c: Regenerate.
This patch adds constraints for read and write only system registers with the
msr and mrs instructions. The code will treat having both flags set and none
set as the same. These flags add constraints that must be matched up. e.g. a
system register with a READ only flag set, can only be used with mrs. If The
constraint fails a warning is emitted.
Examples of the warnings generated:
test.s: Assembler messages:
test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3'
test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0'
test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3'
and disassembly notes:
0000000000000000 <main>:
0: d5130503 msr dbgdtrtx_el0, x3
4: d5130503 msr dbgdtrtx_el0, x3
8: d5330503 mrs x3, dbgdtrrx_el0
c: d5330503 mrs x3, dbgdtrrx_el0
10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register.
Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during
disassembly the constraints are use to disambiguate between the two. An exact
constraint match is always prefered over partial ones if available.
As always the warnings can be suppressed with -w and also be made errors using
warnings as errors.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
gas/
PR binutils/21446
* testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test.
* testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise.
* testsuite/gas/aarch64/sysreg-diagnostic.s: New.
* testsuite/gas/aarch64/sysreg-diagnostic.l: New.
* testsuite/gas/aarch64/sysreg-diagnostic.d: New.
include/
PR binutils/21446
* opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New.
opcodes/
PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).
This patch adds a new platform option "notes" that can be used to indicate if
disassembly notes should be placed in the disassembly as comments.
These notes can contain information about a failing constraint such as reading
from a write-only register. The disassembly will not be blocked because of this
but -M notes will emit a comment saying that the operation is not allowed.
For assembly this patch adds a new non-fatal status for errors. This is
essentially a warning. The reason for not creating an actual warning type is
that this causes the interaction between the ordering of warnings and errors to
be problematic. Currently the error buffer is almost always filled because of
the way operands are matched during assembly. An earlier template may have put
an error there that would only be displayed if no other template matches or
generates a higher priority error. But by definition a warning is lower
priority than a warning, so the error (which is incorrect if another template
matched) will supersede the warning. By treating warnings as errors and only
later relaxing the severity this relationship keeps working and the existing
reporting infrastructure can be re-used.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
* NEWS: Document notes and warnings.
gas/
PR binutils/21446
* config/tc-aarch64.c (print_operands): Indicate no notes.
(output_operand_error_record): Support non-fatal errors.
(output_operand_error_report, warn_unpredictable_ldst, md_assemble):
Likewise.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_operand_error): Add non_fatal.
(aarch64_print_operand): Support notes.
opcodes/
PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.
This patch if the first patch in a series to add the ability to add constraints
to system registers that an instruction must adhere to in order for the register
to be usable with that instruction.
These constraints can also be used to disambiguate between registers with the
same encoding during disassembly.
This patch adds a new flags entry in the sysreg structures and ensures it is
filled in and read out during assembly/disassembly. It also adds the ability for
the assemble and disassemble functions to be able to gracefully fail and re-use
the existing error reporting infrastructure.
The return type of these functions are changed to a boolean to denote success or
failure and the error structure is passed around to them. This requires
aarch64-gen changes so a lot of the changes here are just mechanical.
gas/
PR binutils/21446
* config/tc-aarch64.c (parse_sys_reg): Return register flags.
(parse_operands): Fill in register flags.
gdb/
PR binutils/21446
* aarch64-tdep.c (aarch64_analyze_prologue,
aarch64_software_single_step, aarch64_displaced_step_copy_insn):
Indicate not interested in errors.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct.
(aarch64_decode_insn): Accept error struct.
opcodes/
PR binutils/21446
* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
and take error struct.
* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
aarch64_ins_reglist, aarch64_ins_ldst_reglist,
aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
aarch64_ext_reglist, aarch64_ext_ldst_reglist,
aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
(determine_disassembling_preference, aarch64_decode_insn,
print_insn_aarch64_word, print_insn_data): Take errors struct.
(print_insn_aarch64): Use errors.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-gen.c (print_operand_inserter): Use errors and change type to
boolean in aarch64_insert_operan.
(print_operand_extractor): Likewise.
* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef.
include * opcode/nfp.h: Use uint64_t instead of bfd_vma.
opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
Defining SPE2_OPCD_SEGS as 13 discounts the possibility that we'd
ever look up spe2_opcd_indices[14..16], which I think is possible.
Extend that array to size 16+1, using the macros we use to index the
array. Similarly use the index macros for PPC_OPCD_SEGS and
VLE_OPCD_SEGS.
* ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP.
(VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to
partition opcode space for index lookup.
This patch replaces AddrPrefixOp0 with AddrPrefixOpReg to indicate that
the size of register operand is controlled by the address size prefix.
This will be used by Intel MOVDIRI and MOVDIR64B instructions later.
gas/
* config/tc-i386.c (process_suffix): Check addrprefixopreg
instead of addrprefixop0.
opcodes/
* i386-gen.c (opcode_modifiers): Replace AddrPrefixOp0 with
AddrPrefixOpReg.
* i386-opc.h (AddrPrefixOp0): Renamed to ...
(AddrPrefixOpReg): This.
(i386_opcode_modifier): Rename addrprefixop0 to addrprefixopreg.
* i386-opc.tbl: Replace AddrPrefixOp0 with AddrPrefixOpReg.
This patch fixes an issue where the memory for the opcode structure is not zero'd before
the first exit branch. So there is one failure mode for which uninitialized memory
is returned.
This causes weird failures when the return code is not checked before inst is used.
opcodes/
* aarch64-dis.c (aarch64_opcode_decode): Moved memory clear code.
There's little point carrying up to three templates per insn flavor
when the sole difference is operand size and the dependency on AVX512VL
being enabled. Instead the need for AVX512VL can be derived from an
operand allowing for ZMMword as well as one or both or XMMword and
YMMword (irrespective of whether this is a register or memory operand).
Without further abstraction to deal with the different Disp8MemShift
values between the templates, only a limited set (mostly ones only
allowing for non-memory operands) can be folded, which is being done
here.
Also drop IgnoreSize wherever possible from anything that's being
touched anyway.
All of AVX, LWP, MPX, and PKU require XSAVE, and hence it as well as
XRSTOR should be enabled when enabling these ISA extensions. Leverage
these implications to shorten some of the cpu_flag_init[] entries.
It's not clear to me why they had been introduced - the respective
comments in opcodes/i386-gen.c are certainly wrong: ymm<N> registers
are very well supported (and necessary) with just AVX512F.
Neither 287 wrt 8087 nor 387 wrt 287 are proper supersets - in each case
some insns get removed from the ISA (they become NOPs, but code intended
for newer co-processors should not use them).
Furthermore with .no87, ST should not be recognized as a register name.
Rn is supposed to have a 5 bit range but instead was given 4 bits
causing these instructions to disassemble as unknown instructions.
opcodes/
* aarch64-tbl.h (sqrdmlah, sqrdmlsh): Fix masks.
gas/
* testsuite/gas/aarch64/rdma.s: Test for larger register numbers.
* testsuite/gas/aarch64/rdma.d: Update results.
* testsuite/gas/aarch64/rdma-directive.d: Likewise.
Since only the first 32 bits of input operand are used for tpause and
umwait, the REX.W bit is skipped. Both 32-bit registers and 64-bit
registers are allowed.
gas/
* testsuite/gas/i386/x86-64-waitpkg.s: Add 32-bit registers
tests for tpause and umwait.
* testsuite/gas/i386/x86-64-waitpkg-intel.d: Updated.
* testsuite/gas/i386/x86-64-waitpkg.d: Likewise.
opcodes/
* i386-dis.c (prefix_table): Replace Em with Edq on tpause and
umwait.
* i386-opc.tbl: Allow 32-bit registers for tpause and umwait in
64-bit mode.
* i386-tbl.h: Regenerated.
"vex" has many fields to control how to decode an instruction. Clear
all fields in "vex" before decoding an instruction to avoid using values
left from the previous instruction.
gas/
PR binutils/23025
* testsuite/gas/i386/prefix.s: Add tests for vcvtpd2dq with
VEX and EVEX prefixes.
* testsuite/gas/i386/prefix.d: Updated.
opcodes/
PR binutils/23025
* i386-dis.c (get_valid_dis386): Don't set vex.prefix nor vex.w
to 0.
(print_insn): Clear vex instead of vex.evex.
It again can be inferred from other information.
The vpopcntd templates all need to have Dword added to their memory
operands; the lack thereof was actually a bug preventing certain Intel
syntax code to assemble, so test cases get extended.
In the course of folding their patterns (possible now that the pointless
and partly even bogus VecESize are no longer in the way) I've noticed
that vcvt*2usi, other than their vcvt*2si counterparts, don't allow for
any suffixes. As that is supposedly intentional, make the disassembler
consistently omit suffixes for all to-scalar-int conversion insns.
A few of them were missed in commit 7ac2002247 ("x86: derive DispN
from BaseIndex") and also couldn't be removed by subsequent commits
touching certain templates anyway.
The wrong placement of the Load attribute in the templates prevented
this from working. The disassembler also didn't handle this consistently
with other similar dual-encoding insns.
While many templates allowing multiple suitably matching XMM/YMM/ZMM
operand sizes can be folded, a few need to be split in order to not
wrongly accept "xmmword ptr" operands when only XMM registers are
permitted (and memory operands are more narrow). Add a test case
validating this.
"clr reg" is an alias of "xor reg, reg". We can encode "clr reg64" as
"xor reg32, reg32".
gas/
* config/tc-i386.c (optimize_encoding): Also encode "clr reg64"
as "xor reg32, reg32".
* testsuite/gas/i386/x86-64-optimize-1.s: Add "clr reg64" tests.
* testsuite/gas/i386/x86-64-optimize-1.d: Updated.
opcodes/
* i386-opc.tbl: Add Optimize to clr.
* i386-tbl.h: Regenerated.
The differences between some of the register and memory forms of the
same insn often don't really require the templates to be separate. For
example, Disp8MemShift is simply irrelevant to register forms. Fold
these as far as possible, and also fold register-only forms. Further
folding is possible, but needs other prereq work done first.
A note regarding EVEXDYN: This is intended to be used only when no other
properties of the template would make is_evex_encoding() return true. In
all "normal" cases I think it is preferable to omit this indicator, to
keep the table half way readable.
Their memory forms were bogusly using VexLWP instead of VexNDD. Adjust
VexNDD handling to cope with these, allowing their register and memory
forms to be folded.
The differences between some of the register and memory forms of the
same insn often don't really require the templates to be separate. For
example, Disp8MemShift is simply irrelevant to register forms. Fold them
as far as possible. Further folding is possible, but needs other prereq
work done first.
They aren't really useful (anymore?): The conflicting operand size check
isn't applicable to any insn validly using respective memory operand
sizes (and if they're used wrongly, another error would result), and the
logic in process_suffix() can be easily changed to work without them.
While re-structuring conditionals in process_suffix() also drop the
CMPXCHG8B special case in favor of a NoRex64 attribute in the opcode
table.
