This patch adds initial 64-bit insn assembler/disassembler support.
The only instruction added is "pnop" along with the automatic aligning
of prefix instruction so they do not cross 64-byte boundaries.
include/
* dis-asm.h (WIDE_OUTPUT): Define.
* opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare.
(PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX),
(PPC_PREFIX_P, PPC_PREFIX_SEG): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "future" entry.
(PREFIX_OPCD_SEGS): Define.
(prefix_opcd_indices): New array.
(disassemble_init_powerpc): Initialize prefix_opcd_indices.
(lookup_prefix): New function.
(print_insn_powerpc): Handle 64-bit prefix instructions.
* ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK),
(PMRR, POWERXX): Define.
(prefix_opcodes): New instruction table.
(prefix_num_opcodes): New constant.
binutils/
* objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes.
(struct insn_label_list): New.
(insn_labels, free_insn_labels): New variables.
(ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs.
(ppc_frob_label, ppc_new_dot_label): Move functions earlier in file
and call ppc_record_label.
(md_assemble): Handle 64-bit prefix instructions. Align labels
that are on the same line as a prefix instruction.
* config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to
later in the file.
(md_start_line_hook): Define.
(ppc_start_line_hook): Declare.
* testsuite/gas/ppc/prefix-align.d,
* testsuite/gas/ppc/prefix-align.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new test.
This patch adds support for the Linux kernel eBPF architecture to the
opcodes. The port is based on CGEN.
opcodes/ChangeLog:
2019-05-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure.ac (SHARED_DEPENDENCIES): Add case for bfd_bpf_arch.
* configure: Regenerated.
* Makefile.am: Add rules for the files generated from cpu/bpf.cpu
and cpu/bpf.opc.
(HFILES): Add bpf-desc.h and bpf-opc.h.
(TARGET_LIBOPCODES_CFILES): Add bpf-asm.c, bpf-desc.c, bpf-dis.c,
bpf-ibld.c and bpf-opc.c.
(BPF_DEPS): Define.
* Makefile.in: Regenerated.
* disassemble.c (ARCH_bpf): Define.
(disassembler): Add case for bfd_arch_bpf.
(disassemble_init_for_target): Likewise.
(enum epbf_isa_attr): Define.
* disassemble.h: extern print_insn_bpf.
* bpf-asm.c: Generated.
* bpf-opc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-ibld.c: Likewise.
* bpf-dis.c: Likewise.
* bpf-desc.h: Likewise.
* bpf-desc.c: Likewise.
This patch makes changes to the <spec_reg> operand for VMRS and VMSR
instructions as per the Armv8.1-M Mainline.
New <spec_reg> options to support are:
0b0010: FPSCR_nzcvqc, access to FPSCR condition and saturation flags.
0b1100: VPR, privileged only access to the VPR register.
0b1101: P0, access to VPR.P0 predicate fields
0b1110: FPCXT_NS, enables saving and restoring of Non-secure floating
point context.
0b1111: FPCXT_S, enables saving and restoring of Secure floating point
context
*** gas/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (parse_operands): Update case OP_RVC to
parse p0 and P0.
(do_vmrs): Add checks for valid operands with respect to
cpu and fpu options.
(do_vmsr): Likewise.
(reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS
and FPCXT_S.
* testsuite/gas/arm/armv8_1-m-spec-reg.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg.s: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New.
* testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values.
* testsuite/gas/arm/vfp1xD_t2.d: Likewise.
*** opcodes/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (coprocessor_opcodes): New instructions for VMRS
and VMSR with the new operands.
This patch adds the following instructions which are part of the
Armv8.1-M Mainline:
CINC
CINV
CNEG
CSINC
CSINV
CSNEG
CSET
CSETM
CSEL
gas/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (TOGGLE_BIT): New.
(T16_32_TAB): New entries for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm and csel.
(operand_parse_code): New OP_RR_ZR.
(parse_operand): Handle case for OP_RR_ZR.
(do_t_cond): New.
(insns): New instructions for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm, csel.
* testsuite/gas/arm/armv8_1-m-cond-bad.d: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.l: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.s: New test.
* testsuite/gas/arm/armv8_1-m-cond.d: New test.
* testsuite/gas/arm/armv8_1-m-cond.s: New test.
opcodes/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (enum mve_instructions): New enum
for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv
and cneg.
(mve_opcodes): New instructions as above.
(is_mve_encoding_conflict): Add cases for csinc, csinv,
csneg and csel.
(print_insn_mve): Accept new %<bitfield>c and %<bitfield>C.
The MIPS64R6 TRM requires that the source register for DAUI
not be r0.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 67-68.
gas/
* testsuite/gas/mips/r6-branch-constraints.s: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.s: this and add test
case for DAUI.
* testsuite/gas/mips/r6-branch-constraints.l: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.l: this and add test
for DAUI.
* testsuite/gas/mips/mips.exp: Rename test from
r6-branch-constraints to r6-reg-constraints.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Change source register
constraint for DAUI.
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (thumb32_opcodes): Add new instructions.
(print_insn_thumb32): Handle new instructions.
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new reasons.
(is_mve_encoding_conflict): Handle new instructions.
(is_mve_unpredictable): Likewise.
(mve_opcodes): Add new instructions.
(print_mve_unpredictable): Handle new reasons.
(print_mve_register_blocks): New print function.
(print_mve_size): Handle new instructions.
(print_insn_mve): Likewise.
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
Michael Collison <michael.collison@arm.com>
* arm-dis.c (enum mve_instructions): Add new instructions.
(enum mve_unpredictable): Add new values.
(mve_opcodes): Add new instructions.
(vec_condnames): New array with vector conditions.
(mve_predicatenames): New array with predicate suffixes.
(mve_vec_sizename): New array with vector sizes.
(enum vpt_pred_state): New enum with vector predication states.
(struct vpt_block): New struct type for vpt blocks.
(vpt_block_state): Global struct to keep track of state.
(mve_extract_pred_mask): New helper function.
(num_instructions_vpt_block): Likewise.
(mark_outside_vpt_block): Likewise.
(mark_inside_vpt_block): Likewise.
(invert_next_predicate_state): Likewise.
(update_next_predicate_state): Likewise.
(update_vpt_block_state): Likewise.
(is_vpt_instruction): Likewise.
(is_mve_encoding_conflict): Add entries for new instructions.
(is_mve_unpredictable): Likewise.
(print_mve_unpredictable): Handle new cases.
(print_instruction_predicate): Likewise.
(print_mve_size): New function.
(print_vec_condition): New function.
(print_insn_mve): Handle vpt blocks and new print operands.
opcodes/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm-dis.c (print_insn_coprocessor_1): Disable the use of coprocessors
8, 14 and 15 for Armv8.1-M Mainline.
PR 24538
gas * macro.c (get_any_string): Increase size of buffer used to hold
decimal value of expression result.
* dw2gencfi.c (get_debugseg_name): Handle an empty name.
* dwarf2dbg.c (get_filenum): Catch integer wraparound when
extending allocate file array.
(dwarf2_directive_filename): Add extra checks of the computed file
number.
* config/tc-arm.c (arm_tc_equal_in_insn): Insert copy of name into
warning hash table.
(s_arm_eabi_attribute): Check for obj_elf_vendor_attribute
returning -1.
* config/tc-i386.c (i386_output_nops): Catch an attempt to
generate nops of negative lengths.
* as.h (MAX_LITTLENUMS): Move definition to here from...
* config/atof-ieee.c: ...here.
* config/tc-aarch64.c: ...here.
* config/tc-arc.c: ...here.
* config/tc-arm.c: ...here.
* config/tc-epiphany.c: ...here.
* config/tc-i386.c: ...here.
* config/tc-ia64.c: ...here. (And correct the value).
* config/tc-m32c.c: ...here.
* config/tc-m32r.c: ...here.
* config/tc-metag.c: ...here.
* config/tc-microblaze.c: ...here.
* config/tc-nds32.c: ...here.
* config/tc-or1k.c: ...here.
* config/tc-score.c: ...here.
* config/tc-score7.c: ...here.
* config/tc-tic4x.c: ...here.
* config/tc-tilegx.c: ...here.
* config/tc-tilepro.c: ...here.
* config/tc-visium.c: ...here.
* config/tc-sh.c (md_assemble): Add check for an instruction with
no opcodes.
* config/tc-mips.c (mips_lookup_insn): Add check for very short
instruction name.
* config/tc-tic54x.c: Use unsigned chars to access is_end_of_line
array.
(tic54x_start_line_hook): Check for an empty line.
(next_line_shows_parallel): Do not walk off the end of the string.
(tic54x_macro_start): Check for too much macro nesting.
(tic54x_start_label): Add label_start parameter. Use this
parameter to check the first character of the label.
* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Pass
line_start variable to tic54x_start_label.
PR 24538
opcodes * ia64-opc.c (ia64_find_matching_opcode): Check for reaching the
end of the table prematurely.
Release 6 of the MIPS architecture does not have an ADDI instruction.
ADD/SUB instructions with immediate operands can be expanded to load
and immediate value and then perform the operation.
gas/
* config/tc-mips.c (macro) <M_ADD_I, M_SUB_I, M_DADD_I, M_DSUB_I>:
Add expansions for MIPS r6.
* testsuite/gas/mips/add.s: Enable tests for R6.
* testsuite/gas/mips/daddi.s: Annotate to test DADD for R6.
* testsuite/gas/mips/mipsr6@add.d: Likewise.
* gas/testsuite/gas/mips/mipsr6@dadd.d: New test.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
opcodes/
* mips-opc.c (mips_opcodes): Enable ADD, SUB, DADD and DSUB
macros for R6.
opcodes/
* ppc-dis.c (skip_optional_operands): Change return type and returns.
(print_insn_powerpc) <skip_optional>: Change type.
Call skip_optional_operands if we have not skipped any operands.
gas/
* testsuite/gas/ppc/476.d: Update expected output.
* testsuite/gas/ppc/power6.d: Likewise.
This patch adds all the SVE2 instructions and their associated qualifier
sets.
Ok for trunk?
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-dis-2.c: Regenerate.
* aarch64-tbl.h (OP_SVE_BBU): New variant set.
(OP_SVE_BBB): New variant set.
(OP_SVE_DDDD): New variant set.
(OP_SVE_HHH): New variant set.
(OP_SVE_HHHU): New variant set.
(OP_SVE_SSS): New variant set.
(OP_SVE_SSSU): New variant set.
(OP_SVE_SHH): New variant set.
(OP_SVE_SBBU): New variant set.
(OP_SVE_DSS): New variant set.
(OP_SVE_DHHU): New variant set.
(OP_SVE_VMV_HSD_BHS): New variant set.
(OP_SVE_VVU_HSD_BHS): New variant set.
(OP_SVE_VVVU_SD_BH): New variant set.
(OP_SVE_VVVU_BHSD): New variant set.
(OP_SVE_VVV_QHD_DBS): New variant set.
(OP_SVE_VVV_HSD_BHS): New variant set.
(OP_SVE_VVV_HSD_BHS2): New variant set.
(OP_SVE_VVV_BHS_HSD): New variant set.
(OP_SVE_VV_BHS_HSD): New variant set.
(OP_SVE_VVV_SD): New variant set.
(OP_SVE_VVU_BHS_HSD): New variant set.
(OP_SVE_VZVV_SD): New variant set.
(OP_SVE_VZVV_BH): New variant set.
(OP_SVE_VZV_SD): New variant set.
(aarch64_opcode_table): Add sve2 instructions.
New operand describes a shift-left immediate encoded in bits
22:20-19:18-16 where UInt(bits) - esize == shift.
This operand is useful for instructions like sshllb.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22
operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHLIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22
operand.
Add sve_size_tsz_bhs iclass needed for sqxtnb and similar instructions.
This iclass encodes one of three variants by the most significant bit
set in a 3-bit value where only one bit may be set.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_tsz_bhs
iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle
sve_size_tsz_bhs iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_size_tsz_bhs iclass decode.
This includes defining a new single bit field SVE_i2h at position 20.
SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded
in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_Zm4_11_INDEX.
(aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX.
(fields): Handle SVE_i2h field.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
This new iclass encodes the variant by which is the most significant bit
used of bits 23-22:20-19, where those bits are usually part of a
given constant operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): Add sve_shift_tsz_bhsd
iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle
sve_shift_tsz_bhsd iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_shift_tsz_bhsd iclass decode.
Include a new iclass to extract the variant from the most significant 3
bits of this operand.
Instructions such as rshrnb include a constant shift amount as an
operand, where the most significant three bits of this operand determine
what size elements the instruction is operating on.
The new SVE_SHRIMM_UNPRED_22 operand denotes this constant encoded in
bits 22:20-19:18-16 while the new sve_shift_tsz_hsd iclass denotes that
the SVE qualifier is encoded in bits 22:20-19.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHRIMM_UNPRED_22
operand.
(enum aarch64_insn_class): Add sve_shift_tsz_hsd iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-asm.c (aarch64_ins_sve_shrimm):
(aarch64_encode_variant_using_iclass): Handle
sve_shift_tsz_hsd iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_shift_tsz_hsd iclass decode.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHRIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22
operand.
Add sve_size_013 instruction class
This new iclass handles instructions such as pmullb whose size specifier
can only be encoded as 0, 1, or 3.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_013 iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle
sve_size_013 iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_size_013 iclass decode.
Add new iclass sve_size_bh to handle instructions that have two variants
encoded with the SVE_sz field.
This iclass behaves the same as the sve_size_sd iclass, but it has a
nicer name for those instructions that choose between variants using the
"B" and "H" size qualifiers.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): Add sve_size_bh iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Handle
sve_size_bh iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_size_bh iclass decode.
Add AARCH64_OPND_SVE_ADDR_ZX operand that allows a vector of addresses
in a Zn register, offset by an Xm register.
This is used with scatter/gather SVE2 instructions.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (REG_ZR): Macro specifying zero register.
(parse_address_main): Account for new addressing mode [Zn.S, Xm].
(parse_operands): Handle new SVE_ADDR_ZX operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_ADDR_ZX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_ADDR_ZX.
(aarch64_print_operand): Add printing for SVE_ADDR_ZX.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_ADDR_ZX operand.
Introduce new operand SVE_Zm3_11_INDEX that indicates a register between
z0-z7 stored in bits 18-16 and an index stored in bits 20-19:11.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm3_11_INDEX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_Zm3_11_INDEX.
(aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX.
(fields): Handle SVE_i3l and SVE_i3h2 fields.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2
fields.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand.
New operand AARCH64_OPND_SVE_IMM_ROT3 handles a single bit rotate
operand encoded at bit position 10.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_IMM_ROT3 operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_IMM_ROT3.
(aarch64_print_operand): Add printing for SVE_IMM_ROT3.
(fields): Handle SVE_rot3 field.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand.
SVE2 introduces a number of new instructions that work with the movprfx
instruction. This commit ensures that SVE2 instructions are accounted
for.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-opc.c (verify_constraints): Check for movprfx for sve2
instructions.
Include all feature flag macros.
The "sve2" extension that enables the core sve2 instructions.
This also enables the sve extension, since sve is a requirement of sve2.
Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions.
These are all given extra feature flags, "bitperm", "sve2-sm4",
"sve2-aes", and "sve2-sha3" respectively.
The sm4, aes, and sha3 extensions are explicitly marked as sve2
extensions to distinguish them from the corresponding NEON extensions.
Rather than continue extending the current feature flag numbers, I used
some bits that have been skipped.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c: Add command line architecture feature flags
"sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm".
* doc/c-aarch64.texi: Document new architecture feature flags.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SVE2
AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM,
AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New
feature macros.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h
(aarch64_feature_sve2, aarch64_feature_sve2aes,
aarch64_feature_sve2sha3, aarch64_feature_sve2sm4,
aarch64_feature_sve2bitperm): New feature sets.
(SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros
for feature set addresses.
(SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN,
SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
Add paired load-link and store-conditional instructions to the
EVA ASE for MIPS32R6[1]. These instructions are optional within
the EVA ASE. Their presence is indicated by the XNP bit in the
Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 230-231, pp. 357-360.
gas/
* config/tc-mips.c (mips_set_ase): Handle ASE_EVA_R6.
(macro) <M_LLWPE_AB, M_SCWPE_AB>: New cases.
(mips_after_parse_args): Translate EVA to EVA_R6.
* testsuite/gas/mips/ase-errors-1.s: Add new instructions.
* testsuite/gas/mips/eva.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Check errors for
new instructions.
* testsuite/gas/mips/mipsr6@eva.d: Check new test cases.
include/
* opcode/mips.h (ASE_EVA_R6): New macro.
(M_LLWPE_AB, M_SCWPE_AB): New enum values.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Add ISA
argument and set ASE_EVA_R6 appropriately.
(set_default_mips_dis_options): Pass ISA to above.
(parse_mips_dis_option): Likewise.
* mips-opc.c (EVAR6): New macro.
(mips_builtin_opcodes): Add llwpe, scwpe.
Derived from patch authored by Andrew Bennett <andrew.bennett@imgtec.com>
This patch enables the new Transactional Memory Extension added recently
as part of Arm's new architecture technologies.
We introduce a new optional extension "tme" to enable this. The following
instructions are part of the extension:
* tstart <Xt>
* ttest <Xt>
* tcommit
* tcancel #<imm>
The ISA for the above can be found here:
https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order
*** gas/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_features): Add "tme".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/tme-invalid.d: New test.
* testsuite/gas/aarch64/tme-invalid.l: New test.
* testsuite/gas/aarch64/tme-invalid.s: New test.
* testsuite/gas/aarch64/tme.d: New test.
* testsuite/gas/aarch64/tme.s: New test.
*** include/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_TME): New.
(enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16.
*** opcodes/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_IMM_NIL): New.
(TME): New.
(_TME_INSN): New.
(struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
Alan Modra
Peter Bergner
Jose E. Marchesi
Sudakshina Das
Faraz Shahbazker
Nick Clifton
Andre Vieira
Matthew Malcomson