Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-20-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-19-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions are used for both page table walking and for
deciding what format in which to deliver exception results.
Since ptw.c is only present for system mode, put the functions
into tlb_helper.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-18-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the ptw load functions, plus 3 common subroutines:
S1_ptw_translate, ptw_attrs_are_device, and regime_translation_big_endian.
This also allows get_phys_addr_lpae to become static again.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are a handful of helpers for combine_cacheattrs
that we can move at the same time as the main entry point.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-14-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function has one private helper, v8m_is_sau_exempt,
so move that at the same time.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the final user of get_phys_addr_pmsav7_default
within helper.c, so make it static within ptw.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Begin moving all of the page table walking functions
out of helper.c, starting with get_phys_addr().
Create a temporary header file, "ptw.h", in which to
share declarations between the two C files while we
are moving functions.
Move a few declarations to "internals.h", which will
remain used by multiple C files.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the decl from ptw.h to internals.h. Provide an inline
version for user-only, just as we do for arm_stage1_mmu_idx.
Move an endif down to make the definition in helper.c be
system only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220604040607.269301-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
The FEAT_DoubleFault extension adds the following:
* All external aborts on instruction fetches and translation table
walks for instruction fetches must be synchronous. For QEMU this
is already true.
* SCR_EL3 has a new bit NMEA which disables the masking of SError
interrupts by PSTATE.A when the SError interrupt is taken to EL3.
For QEMU we only need to make the bit writable, because we have no
sources of SError interrupts.
* SCR_EL3 has a new bit EASE which causes synchronous external
aborts taken to EL3 to be taken at the same entry point as SError.
(Note that this does not mean that they are SErrors for purposes
of PSTATE.A masking or that the syndrome register reports them as
SErrors: it just means that the vector offset is different.)
* The existing SCTLR_EL3.IESB has an effective value of 1 when
SCR_EL3.NMEA is 1. For QEMU this is a no-op because we don't need
different behaviour based on IESB (we don't need to do anything to
ensure that error exceptions are synchronized).
So for QEMU the things we need to change are:
* Make SCR_EL3.{NMEA,EASE} writable
* When taking a synchronous external abort at EL3, adjust the
vector entry point if SCR_EL3.EASE is set
* Advertise the feature in the ID registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220531151431.949322-1-peter.maydell@linaro.org
The architectural feature RASv1p1 introduces the following new
features:
* new registers ERXPFGCDN_EL1, ERXPFGCTL_EL1 and ERXPFGF_EL1
* new bits in the fine-grained trap registers that control traps
for these new registers
* new trap bits HCR_EL2.FIEN and SCR_EL3.FIEN that control traps
for ERXPFGCDN_EL1, ERXPFGCTL_EL1, ERXPFGP_EL1
* a larger number of the ERXMISC<n>_EL1 registers
* the format of ERR<n>STATUS registers changes
The architecture permits that if ERRIDR_EL1.NUM is 0 (as it is for
QEMU) then all these new registers may UNDEF, and the HCR_EL2.FIEN
and SCR_EL3.FIEN bits may be RES0. We don't have any ERR<n>STATUS
registers (again, because ERRIDR_EL1.NUM is 0). QEMU does not yet
implement the fine-grained-trap extension. So there is nothing we
need to implement to be compliant with the feature spec. Make the
'max' CPU report the feature in its ID registers, and document it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220531114258.855804-1-peter.maydell@linaro.org
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-42-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-40-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emulate a 3A5000 board use the new loongarch instruction.
3A5000 belongs to the Loongson3 series processors.
The board consists of a 3A5000 cpu model and the virt
bridge. The host 3A5000 board is really complicated and
contains many functions.Now for the tcg softmmu mode
only part functions are emulated.
More detailed info you can see
https://github.com/loongson/LoongArch-Documentation
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-31-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This includes:
-RDTIME{L/H}.W
-RDTIME.D
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-30-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This includes:
- IOCSR{RD/WR}.{B/H/W/D}
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-27-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-25-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-24-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-23-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-22-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-21-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-20-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-19-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220606124333.2060567-18-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds support for disassembling via option '-d in_asm'.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-17-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This includes:
- FCMP.cond.{S/D}
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-12-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds main translation routines and
basic functions for translation.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-4-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch adds target state header, target definitions
and initialization routines.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220606124333.2060567-3-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch gives an introduction to the LoongArch target.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220606124333.2060567-2-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When QEMU is started with '-cpu host,host-cache-info=on', it will
passthrough host's number of logical processors sharing cache and
number of processor cores in the physical package. QEMU already
fixes up the later to correctly reflect number of configured cores
for VM, however number of logical processors sharing cache is still
comes from host CPU, which confuses guest started with:
-machine q35,accel=kvm \
-cpu host,host-cache-info=on,l3-cache=off \
-smp 20,sockets=2,dies=1,cores=10,threads=1 \
-numa node,nodeid=0,memdev=ram-node0 \
-numa node,nodeid=1,memdev=ram-node1 \
-numa cpu,socket-id=0,node-id=0 \
-numa cpu,socket-id=1,node-id=1
on 2 socket Xeon 4210R host with 10 cores per socket
with CPUID[04H]:
...
--- cache 3 ---
cache type = unified cache (3)
cache level = 0x3 (3)
self-initializing cache level = true
fully associative cache = false
maximum IDs for CPUs sharing cache = 0x1f (31)
maximum IDs for cores in pkg = 0xf (15)
...
that doesn't match number of logical processors VM was
configured with and as result RHEL 9.0 guest complains:
sched: CPU #10's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
WARNING: CPU: 10 PID: 0 at arch/x86/kernel/smpboot.c:421 topology_sane.isra.0+0x67/0x80
...
Call Trace:
set_cpu_sibling_map+0x176/0x590
start_secondary+0x5b/0x150
secondary_startup_64_no_verify+0xc2/0xcb
Fix it by capping max number of logical processors to vcpus/socket
as it was configured, which fixes the issue.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2088311
Message-Id: <20220524151020.2541698-3-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Accourding Intel's CPUID[EAX=04H] resulting bits 31 - 26 in EAX
should be:
"
**** The nearest power-of-2 integer that is not smaller than (1 + EAX[31:26]) is the number of unique
Core_IDs reserved for addressing different processor cores in a physical package. Core ID is a subset of
bits of the initial APIC ID.
"
ensure that values stored in EAX[31-26] always meets this condition.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220524151020.2541698-2-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous patch used wrong count setting with index value, which got wrong
value from CPUID(EAX=12,ECX=0):EAX. So the SGX1 instruction can't be exposed
to VM and the SGX decice can't work in VM.
Fixes: d19d6ffa07 ("target/i386: introduce helper to access supported CPUID")
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220530131834.1222801-1-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The correct A20 masking is done if paging is enabled (protected mode) but it
seems to have been forgotten in real mode. For example from the AMD64 APM Vol. 2
section 1.2.4:
> If the sum of the segment base and effective address carries over into bit 20,
> that bit can be optionally truncated to mimic the 20-bit address wrapping of the
> 8086 processor by using the A20M# input signal to mask the A20 address bit.
Most BIOSes will enable the A20 line on boot, but I found by disabling the A20 line
afterwards, the correct wrapping wasn't taking place.
`handle_mmu_fault' in target/i386/tcg/sysemu/excp_helper.c seems to be the culprit.
In real mode, it fills the TLB with the raw unmasked address. However, for the
protected mode, the `mmu_translate' function does the correct A20 masking.
The fix then should be to just apply the A20 mask in the first branch of the if
statement.
Signed-off-by: Stephen Michael Jothen <sjothen@gmail.com>
Message-Id: <Yo5MUMSz80jXtvt9@air-old.local>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Storage key controlled protection is currently not honored when
emulating instructions.
If available, enable key protection for the MEM_OP ioctl, thereby
enabling it for the s390_cpu_virt_mem_* functions, when using kvm.
As a result, the emulation of the following instructions honors storage
keys:
* CLP
The Synch I/O CLP command would need special handling in order
to support storage keys, but is currently not supported.
* CHSC
Performing commands asynchronously would require special
handling, but commands are currently always synchronous.
* STSI
* TSCH
Must (and does) not change channel if terminated due to
protection.
* MSCH
Suppressed on protection, works because fetching instruction.
* SSCH
Suppressed on protection, works because fetching instruction.
* STSCH
* STCRW
Suppressed on protection, this works because no partial store is
possible, because the operand cannot span multiple pages.
* PCISTB
* MPCIFC
* STPCIFC
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Message-Id: <20220506153956.2217601-3-scgl@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
One less P needed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220523115123.150340-1-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Also mark raise_exception_ra and raise_exception, lest we
generate a warning about helper_raise_exception returning.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-18-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TPF stands for "trap false", and is a long-form nop for ColdFire.
Re-use the immediate consumption code from trapcc; the insn will
already expand to a nop because of the TCG_COND_NEVER test
within do_trapcc.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.1, Four word
stack frame (format 0), includes Illegal Instruction. Use the
correct frame format, which does not use the ADDR argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Trace (and others) is
supposed to record the next insn in PC and the address
of the trapping instruction in ADDRESS.
Create gen_raise_exception_format2 to record the trapping
pc in env->mmu.ar. Update m68k_interrupt_all to pass the
value to do_stack_frame. Update cpu_loop to handle EXCP_TRACE.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), Zero Div (and others)
is supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
While the N, Z and V flags are documented to be undefine on DIV0,
the C flag is documented as always cleared.
Update helper_div* to take the instruction length as an argument
and use raise_exception_format2. Hoist the reset of the C flag
above the division by zero check.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the M68040 Users Manual, section 8.4.3,
Six word stack frame (format 2), CHK, CHK2 (and others)
are supposed to record the next insn in PC and the
address of the trapping instruction in ADDRESS.
Create a raise_exception_format2 function to centralize recording
of the trapping pc in mmu.ar, plus advancing to the next insn.
Update m68k_interrupt_all to pass mmu.ar to do_stack_frame.
Update cpu_loop to pass mmu.ar to siginfo.si_addr, as the
kernel does in trap_c().
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only value this variable holds is now env->pc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add parenthesis around & vs &&.
Remove assignment to sr in function call argument -- note that
sr is unused after the call, so the assignment was never needed,
only the result of the & expression.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Replace an if ladder with a switch for clarity.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than adjust the PC in all of the consumers, raise
the exception with the correct PC in the first place.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220602013401.303699-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We now have individual checks on all insns within disas_sve.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-115-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For all remaining trans_* functions that do not already
have a check, add one now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-114-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-113-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-112-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from do_sve2_shr_narrow and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-111-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from do_sve2_shll_tb and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-110-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from do_sve2_narrow_extract and hoist the sve2
check into the TRANS_FEAT macro.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-109-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-108-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since 636ddeb15c, we do not require rd == ra.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-107-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-106-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-105-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-104-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-103-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-102-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-101-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-100-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the function to match other expansion functions and
move to be adjacent. Split out gen_gvec_fpst_zzzp as a
helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-99-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-98-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-97-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-96-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-95-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the function to match other expansion function and
move to be adjacent. Split out gen_gvec_fpst_zzp as a
helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-94-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simplify indexing of this array. This will allow folding
of the illegal esz == 0 into the normal fn == NULL check.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-93-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename do_zz_fp to gen_gvec_fpst_arg_zz, and move up.
Split out gen_gvec_fpst_zz as a helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-92-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-91-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-90-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-89-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-88-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-87-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the function to match gen_gvec_ool_arg_zzz,
and move to be adjacent. Split out gen_gvec_fpst_zzz
as a helper while we're at it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-86-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-85-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-84-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-83-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-82-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This alias is defined on EOR (prediates). While the
same operation could be performed with NAND or NOR,
only bother with the official alias.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-81-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Combined with the check already present in gen_mov_p,
we can simplify some special cases in trans_AND_pppp
and trans_BIC_pppp.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-80-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Being able to specify the feature predicate in TRANS_FEAT
makes it easier to split trans_FMMLA by element size,
which also happens to simplify the decode.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-79-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use these for the several varieties of floating-point
multiply-add instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-78-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-77-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-76-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-75-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the unparsed extractions in trans_CPY_{m,z}_i which are intended
to reject an 8-bit shift of an 8-bit constant for 8-bit element.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-74-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the unparsed extractions in trans_ADD_zzi, trans_SUBR_zzi,
and do_zzi_sat which are intended to reject an 8-bit shift of an
8-bit constant for 8-bit element.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-73-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the unparsed extraction in trans_DUP_i,
which is intended to reject an 8-bit shift of
an 8-bit constant for 8-bit element.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-72-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-71-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-70-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-69-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-68-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-67-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-66-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-65-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-64-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-63-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-62-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-61-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_zip*
to use TRANS_FEAT and gen_gvec_ool_arg_zzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-60-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-59-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is in line with how we treat uzp, and will
eliminate the special case code during translation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-58-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-57-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-56-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-55-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-54-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-53-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-52-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-51-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-50-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-49-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the DO_ZPZZZ macro, as it had just the two uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-48-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-47-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Share code between the various shifts using arg_rpri_esz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-46-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-45-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-44-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_fn2i
to use TRANS_FEAT and gen_gvec_fn_arg_zzi.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-43-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have two places that perform this particular operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-42-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The check is already done in gen_gvec_ool_zzzp,
which is called by do_sel_z; remove from callers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-41-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-40-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have two places that perform this particular operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-39-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_zzzz_fn
to use TRANS_FEAT and gen_gvec_fn_arg_zzzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-38-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge gen_gvec_fn_zzzz with the sve access check and the
dereference of arg_rrrr_esz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-37-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The decode for RAX1 sets esz to MO_8, because that's what
we use by default for "no esz present". We changed that
to MO_64 during translation because it is more logical for
the operation. However, the esz argument to gen_gvec_rax1
is unused and forces MO_64 within that function, so there
is no need to do it here as well.
Simplify to use gen_gvec_fn_arg_zzz and TRANS_FEAT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-36-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_fn_zzz
to use TRANS_FEAT and gen_gvec_fn_arg_zzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-35-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions directly using
gen_gvec_fn_arg_zzz to TRANS_FEAT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-34-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Two uses of gen_gvec_fn_zzz can pass on arg_rrr_esz instead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-33-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the function to match gen_gvec_fn_zzz,
and move to be adjacent.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-32-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-31-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is only one caller for gen_gvec_fn_zz; inline it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-30-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_zpzz_ool
to use TRANS_FEAT and gen_gvec_ool_arg_zpzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-29-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions directly using
gen_gvec_ool_arg_zpzz to TRANS_FEAT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-28-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use gen_gvec_ool_arg_zpzz instead of gen_gvec_ool_zzzp
when the arguments come from arg_rprr_esz.
Replaces do_zpzz_ool.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-27-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-26-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert some SVE translation functions using
gen_gvec_ool_arg_zpzi to TRANS_FEAT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-25-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the function to match gen_gvec_ool_arg_zpz,
and move to be adjacent.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-24-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_zpz_data
to use TRANS_FEAT and gen_gvec_ool_arg_zpz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-23-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions directly using
gen_gvec_ool_arg_zpz to TRANS_FEAT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-22-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use gen_gvec_ool_arg_zpz instead of gen_gvec_ool_zzp
when the arguments come from arg_rpr_esz.
Replaces do_zpz_ool.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-21-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-20-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the last direct user of tcg_gen_gvec_4_ool.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-19-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_zzw_data
to use TRANS_FEAT and gen_gvec_ool_arg_zzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-18-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_zzzz_data
to use TRANS_FEAT and gen_gvec_ool_{zzzz,zzxz}.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-17-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_zzz_data
to use TRANS_FEAT and gen_gvec_ool_zzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions directly using
gen_gvec_ool_arg_zzxz to TRANS_FEAT. Also include
BFDOT_zzxz, which was using gen_gvec_ool_zzzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the function to match gen_gvec_ool_arg_zzzz,
and move to be adjacent.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-14-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions directly using
gen_gvec_ool_arg_zzzz to TRANS_FEAT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_zzzz_ool
to use TRANS_FEAT and gen_gvec_ool_arg_zzzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use gen_gvec_ool_arg_zzzz instead of gen_gvec_ool_zzzz
when the arguments come from arg_rrrr_esz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions directly using
gen_gvec_ool_zzzz to TRANS_FEAT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using do_sve2_zzz_ool
to use TRANS_FEAT and gen_gvec_ool_arg_zzz.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using
gen_gvec_ool_arg_zzz to TRANS_FEAT.
Remove trivial wrappers do_aese, do_sm4.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use gen_gvec_ool_arg_zzz instead of gen_gvec_ool_zzz
when the arguments come from arg_rrr_esz.
Replaces do_zzw_ool and do_zzz_data_ool.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert SVE translation functions using gen_gvec_ool_zz to TRANS_FEAT.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Steal the idea for these leaf function expanders from PowerPC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220527181907.189259-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix when building HVF on macOS Aarch64:
target/arm/hvf/hvf.c:586:15: error: unknown type name 'ARMCPRegInfo'; did you mean 'ARMCPUInfo'?
const ARMCPRegInfo *ri;
^~~~~~~~~~~~
ARMCPUInfo
target/arm/cpu-qom.h:38:3: note: 'ARMCPUInfo' declared here
} ARMCPUInfo;
^
target/arm/hvf/hvf.c:589:14: error: implicit declaration of function 'get_arm_cp_reginfo' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
ri = get_arm_cp_reginfo(arm_cpu->cp_regs, key);
^
target/arm/hvf/hvf.c:589:12: warning: incompatible integer to pointer conversion assigning to 'const ARMCPUInfo *' (aka 'const struct ARMCPUInfo *') from 'int' [-Wint-conversion]
ri = get_arm_cp_reginfo(arm_cpu->cp_regs, key);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
target/arm/hvf/hvf.c:591:26: error: no member named 'type' in 'struct ARMCPUInfo'
assert(!(ri->type & ARM_CP_NO_RAW));
~~ ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/assert.h:99:25: note: expanded from macro 'assert'
(__builtin_expect(!(e), 0) ? __assert_rtn(__func__, __ASSERT_FILE_NAME, __LINE__, #e) : (void)0)
^
target/arm/hvf/hvf.c:591:33: error: use of undeclared identifier 'ARM_CP_NO_RAW'
assert(!(ri->type & ARM_CP_NO_RAW));
^
1 warning and 4 errors generated.
Fixes: cf7c6d1004 ("target/arm: Split out cpregs.h")
Reported-by: Duncan Bayne <duncan@bayne.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220525161926.34233-1-philmd@fungible.com
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1029
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the following PowerISA v3.1 instructions:
xxmfacc: VSX Move From Accumulator
xxmtacc: VSX Move To Accumulator
xxsetaccz: VSX Set Accumulator to Zero
The PowerISA 3.1 mentions that for the current version of the
architecture, "the hardware implementation provides the effect of ACC[i]
and VSRs 4*i to 4*i + 3 logically containing the same data" and "The
Accumulators introduce no new logical state at this time" (page 501).
For now it seems unnecessary to create new structures, so this patch
just uses ACC[i] as VSRs 4*i to 4*i+3 and therefore move to and from
accumulators are no-ops.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220524140537.27451-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This allows an x86 host to no-op lwsyncs, and ppc host can use lwsync
rather than sync.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The generated eieio memory ordering semantics do not match the
instruction definition in the architecture. Add a big comment to
explain this strange instruction and correct the memory ordering
behaviour.
Signed-off: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumshm and vmsumshs to decodetree, declare vmsumshm helper with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-13-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumuhm and vmsumuhs to decodetree, declare vmsumuhm helper with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-12-matheus.ferst@eldorado.org.br>
[danielhb: added #undef VMSUMUHM to fix ppc64 build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumubm and vmsummbm to decodetree, declare both helpers with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-11-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xxextractuw and xxinsertw to decodetree, declare both helpers with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xvxsigsp to decodetree, declare helper_xvxsigsp with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move xscvspdpn to decodetree, declare helper_xscvspdpn with
TCG_CALL_NO_RWG_SE and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
fsel doesn't change FPSCR and CR1 is handled by gen_set_cr1_from_fpscr,
so helper_fsel doesn't need the env argument and can be declared with
TCG_CALL_NO_RWG_SE. We also take this opportunity to move the insn to
decodetree.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of VSX instructions without cpu_env as an argument do not access
globals.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of BCD instructions only access the VSRs supplied by the
TCGv_ptr arguments, no globals are accessed.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Helpers of vector instructions without cpu_env as an argument do not
access globals.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The bit FI fix used the sfprf flag as a flag for the set_fi parameter
in do_float_check_status where applicable. Now, this patch rename this
flag to sfifprf to state this dual usage.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20220517161522.36132-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch fixes another not-so-clear situation in Power ISA
regarding the inexact bits in FPSCR. The ISA states that:
"""
When Overflow Exception is disabled (OE=0) and an
Overflow Exception occurs, the following actions are
taken:
...
2. Inexact Exception is set
XX <- 1
...
FI is set to 1
...
"""
However, when tested on a Power 9 hardware, some instructions that
trigger an OX don't set the FI bit:
xvcvdpsp(0x4050533fcdb7b95ff8d561c40bf90996) = FI: CLEARED -> CLEARED
xvnmsubmsp(0xf3c0c1fc8f3230, 0xbeaab9c5) = FI: CLEARED -> CLEARED
(just a few examples. Other instructions are also affected)
The root cause for this seems to be that only instructions that list
the bit FI in the "Special Registers Altered" should modify it.
QEMU is, today, not working like the hardware:
xvcvdpsp(0x4050533fcdb7b95ff8d561c40bf90996) = FI: CLEARED -> SET
xvnmsubmsp(0xf3c0c1fc8f3230, 0xbeaab9c5) = FI: CLEARED -> SET
(all tests assume FI is cleared beforehand)
Fix this by making float_overflow_excp() return float_flag_inexact
if it should update the inexact flags.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20220517161522.36132-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
According to Power ISA, the FI bit in FPSCR is non-sticky.
This means that if an instruction is said to modify the FI bit, then
it should be set or cleared depending on the result of the
instruction. Otherwise, it should be kept as was before.
However, the following inconsistency was found when comparing results
from the hardware (tested on both a Power 9 processor and in
Power 10 Mambo):
(FI bit is set before the execution of the instruction)
Hardware: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> SET
QEMU: xscmpeqdp(0xff..ff, 0xff..ff) = FI: SET -> CLEARED
As the FI bit is non-sticky, and xscmpeqdp does not list it as a field
that is changed by the instruction, it should not be changed after its
execution.
This is happening to multiple instructions in the vsx implementations.
If the ISA does not list the FI bit as altered for a particular
instruction, then it should be kept as it was before the instruction.
QEMU is not following this behavior. Affected instructions include:
- xv* (all vsx-vector instructions);
- xscmp*, xsmax*, xsmin*;
- xstdivdp and similars;
(to identify the affected instructions, just search in the ISA for
the instructions that does not list FI in "Special Registers Altered")
Most instructions use the function do_float_check_status() to commit
changes in the inexact flag. So the fix is to add a parameter to it
that will control if the bit FI should be changed or not.
All users of do_float_check_status() are then modified to provide this
argument, controlling if that specific instruction changes bit FI or
not.
Some macro helpers are responsible for both instructions that change
and instructions that aren't suposed to change FI. This seems to always
overlap with the sfprf flag. So, reuse this flag for this purpose when
applicable.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517161522.36132-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 74c4912f09 changed check_tlb_flush() to use
tlb_flush_all_cpus_synced() instead of calling tlb_flush() on each
CPU. However, as side effect of this, a CPU executing a ptesync
after a tlbie will have its TLB flushed only after exiting its
current Translation Block (TB).
This causes memory accesses to invalid pages to succeed, if they
happen to be on the same TB as the ptesync.
To fix this, use tlb_flush_all_cpus() instead, that immediately
flushes the TLB of the CPU executing the ptesync instruction.
Fixes: 74c4912f09 ("target/ppc: Fix synchronization of mttcg with broadcast TLB flushes")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220503163904.22575-1-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Zero selects all cpu features in disas/m68k.c,
which is really what we want -- not limited to 68040.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220430170225.326447-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Hyper-V TLFS allows for L0 and L1 hypervisors to collaborate on L2's
TLB flush hypercalls handling. With the correct setup, L2's TLB flush
hypercalls can be handled by L0 directly, without the need to exit to
L1.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM kind of supported "extended GVA ranges" (up to 4095 additional GFNs
per hypercall) since the implementation of Hyper-V PV TLB flush feature
(Linux-4.18) as regardless of the request, full TLB flush was always
performed. "Extended GVA ranges for TLB flush hypercalls" feature bit
wasn't exposed then. Now, as KVM gains support for fine-grained TLB
flush handling, exposing this feature starts making sense.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V specification allows to pass parameters for certain hypercalls
using XMM registers ("XMM Fast Hypercall Input"). When the feature is
in use, it allows for faster hypercalls processing as KVM can avoid
reading guest's memory.
KVM supports the feature since v5.14.
Rename HV_HYPERCALL_{PARAMS_XMM_AVAILABLE -> XMM_INPUT_AVAILABLE} to
comply with KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The newly introduced enlightenment allow L0 (KVM) and L1 (Hyper-V)
hypervisors to collaborate to avoid unnecessary updates to L2
MSR-Bitmap upon vmexits.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously, HV_CPUID_NESTED_FEATURES.EAX CPUID leaf was handled differently
as it was only used to encode the supported eVMCS version range. In fact,
there are also feature (e.g. Enlightened MSR-Bitmap) bits there. In
preparation to adding these features, move HV_CPUID_NESTED_FEATURES leaf
handling to hv_build_cpuid_leaf() and drop now-unneeded 'hyperv_nested'.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220525115949.1294004-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since KVM commit 5f76f6f5ff96 ("KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled")
it is not possible to disable MPX on a "-cpu host" just by adding "-mpx"
there if the host CPU does indeed support MPX.
QEMU will fail to set MSR_IA32_VMX_TRUE_{EXIT,ENTRY}_CTLS MSRs in this case
and so trigger an assertion failure.
Instead, besides "-mpx" one has to explicitly add also
"-vmx-exit-clear-bndcfgs" and "-vmx-entry-load-bndcfgs" to QEMU command
line to make it work, which is a bit convoluted.
Make the MPX-related bits in FEAT_VMX_{EXIT,ENTRY}_CTLS dependent on MPX
being actually enabled so such workarounds are no longer necessary.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <51aa2125c76363204cc23c27165e778097c33f0b.1653323077.git.maciej.szmigiero@oracle.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zicsr/Zifencei is not in 'I' since ISA version 20190608,
thus to fully express the capability of the CPU,
they should be exposed in isa_string.
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Tested-by: Jiatai He <jiatai2021@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <YoTqwpfrodveJ7CR@Sun>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the [m|s]tval CSRs are set with trapping instruction encoding
only for illegal instruction traps taken at the time of instruction
decoding.
In RISC-V world, a valid instructions might also trap as illegal or
virtual instruction based to trapping bits in various CSRs (such as
mstatus.TVM or hstatus.VTVM).
We improve setting of [m|s]tval CSRs for all types of illegal and
virtual instruction traps.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-4-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, QEMU does not set hstatus.GVA bit for traps taken from
HS-mode into HS-mode which breaks the Xvisor nested MMU test suite
on QEMU. This was working previously.
This patch updates riscv_cpu_do_interrupt() to fix the above issue.
Fixes: 86d0c45739 ("target/riscv: Fixup setting GVA")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220511144528.393530-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When hypervisor and VS CSRs are accessed from VS-mode or VU-mode,
the riscv_csrrw_check() function should generate virtual instruction
trap instead illegal instruction trap.
Fixes: 0a42f4c440 (" target/riscv: Fix CSR perm checking for HS mode")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220511144528.393530-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"mimpid" cpu option was mistyped to "mipid".
Fixes: 9951ba94 ("target/riscv: Support configuarable marchid, mvendorid, mipid CSR values")
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220523153147.15371-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- setting ext_g will implicitly set ext_i
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220518012611.6772-1-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should separate "check" and "configure" steps as possible.
This commit separates both steps except vector/Zfinx-related checks.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <c3145fa37a529484cf3047c8cb9841e9effad4b0.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
QEMU allowed inconsistent configurations that made floating point
arithmetic effectively unusable.
This commit adds certain checks for consistent FP arithmetic:
- F requires Zicsr
- Zfinx requires Zicsr
- Zfh/Zfhmin require F
- D requires F
- V requires D
Because F/D/Zicsr are enabled by default (and an error will not occur unless
we manually disable one or more of prerequisites), this commit just enforces
the user to give consistent combinations.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <00e7b1c6060dab32ac7d49813b1ca84d3eb63298.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On ISA version 20190608 or later, "G" expands to "IMAFD_Zicsr_Zifencei".
Both "Zicsr" and "Zifencei" are enabled by default and "G" is supposed to
be (virtually) enabled as well, it should be safe to change its expansion.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <d1b5be550a2893a0fd32c928f832d2ff7bfafe35.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because "G" virtual extension expands to "IMAFD", we cannot separately
disable extensions like "F" or "D" without disabling "G". Because all
"IMAFD" are enabled by default, it's harmless to disable "G" by default.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <cab7205f1d7668f642fa242386543334af6bc1bd.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because ext_? members are boolean variables, operator `&&' should be
used instead of `&'.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <91633f8349253656dd08bc8dc36498a9c7538b10.1652583332.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because some operating systems don't correctly parse long ISA extension
string, this commit adds short-isa-string boolean option to disable
generating long ISA extension strings on Device Tree.
For instance, enabling Zfinx and Zdinx extensions and booting Linux (5.17 or
earlier) with FPU support caused a kernel panic.
Operating Systems which short-isa-string might be helpful:
1. Linux (5.17 or earlier)
2. FreeBSD (at least 14.0-CURRENT)
3. OpenBSD (at least current development version)
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7c1fe5f06b0a7646a47e9bcdddb1042bb60c69c8.1652181972.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit moves ISA string conversion for Zhinx and Zhinxmin extensions.
Because extension category ordering of "H" is going to be after "V",
their ordering is going to be valid (on canonical order).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <7a988aedb249b6709f9ce5464ff359b60958ca54.1652181972.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector whole register load instructions have EEW encoded in the opcode,
so we shouldn't take SEW here. Vector whole register store instructions
are always EEW=8.
Signed-off-by: eop Chen <eop.chen@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <165181414065.18540.14828125053334599921-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
VS mode access to hypervisor CSRs should generate virtual, not illegal,
instruction exceptions.
Don't return early and indicate an illegal instruction exception when
accessing a hypervisor CSR from VS mode. Instead, fall through to the
`hmode` predicate to return the correct virtual instruction exception.
Signed-off-by: Dylan Reid <dgreid@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220506165456.297058-1-dgreid@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Live migration can happen when Arch LBR LBREn bit is cleared,
e.g., when migration happens after guest entered SMM mode.
In this case, we still need to migrate Arch LBR MSRs.
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Message-Id: <20220517155024.33270-1-weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We had a few CPTR_* bits defined, but missed quite a few.
Complete all of the fields up to ARMv9.2.
Use FIELD_EX64 instead of manual extract32.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517054850.177016-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature adds a new register, HCRX_EL2, which controls
many of the newer AArch64 features. So far the register is
effectively RES0, because none of the new features are done.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517054850.177016-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As per the description of the HCR_EL2.APK field in the ARMv8 ARM,
Pointer Authentication keys accesses should only be trapped to Secure
EL2 if it is enabled.
Signed-off-by: Florian Lugou <florian.lugou@provenrun.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220517145242.1215271-1-florian.lugou@provenrun.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters instead of 4 for:
Cortex-A9, Cortex-A15, Cortex-A53, Cortex-A57, Cortex-A72,
Cortex-A76, Neoverse-N1, '-cpu max'
This CPU goes from 4 to 8 counters:
A64FX
These CPUs remain with 4 counters:
Cortex-A7, Cortex-A8
This CPU goes down from 4 to 3 counters:
Cortex-R5
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
This change was originally landed in commit f7fb73b8cd (during
the 6.0 release cycle) but was then reverted by commit
21c2dd77a6 before that release because it did not work with KVM.
This version fixes that by creating the scratch vCPU in
kvm_arm_get_host_cpu_features() with the KVM_ARM_VCPU_PMU_V3 feature
if KVM supports it, and then only asking KVM for the PMCR_EL0 value
if the vCPU has a PMU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Added the correct value for a64fx]
Message-id: 20220513122852.4063586-1-peter.maydell@linaro.org
In commit 88ce6c6ee8 we switched from directly fishing the number
of breakpoints and watchpoints out of the ID register fields to
abstracting out functions to do this job, but we forgot to delete the
now-obsolete comment in define_debug_regs() about the relation
between the ID field value and the actual number of breakpoints and
watchpoints. Delete the obsolete comment.
Reported-by: CHRIS HOWARD <cvz185@web.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220513131801.4082712-1-peter.maydell@linaro.org
Give all the debug registers their correct names including the
index, rather than having multiple registers all with the
same name string, which is confusing when viewed over the
gdbstub interface.
Signed-off-by: CHRIS HOWARD <cvz185@web.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 4127D8CA-D54A-47C7-A039-0DB7361E30C0@web.de
[PMM: expanded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the GICv3 set its number of bits of physical priority from the
implementation-specific value provided in the CPU state struct, in
the same way we already do for virtual priority bits. Because this
would be a migration compatibility break, we provide a property
force-8-bit-prio which is enabled for 7.0 and earlier versioned board
models to retain the legacy "always use 8 bits" behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220512151457.3899052-6-peter.maydell@linaro.org
Message-id: 20220506162129.2896966-5-peter.maydell@linaro.org
The unsupported_encoding() macro logs a LOG_UNIMP message and then
generates code to raise the usual exception for an unallocated
encoding. Back when we were still implementing the A64 decoder this
was helpful for flagging up when guest code was using something we
hadn't yet implemented. Now we completely cover the A64 instruction
set it is barely used. The only remaining uses are for five
instructions whose semantics are "UNDEF, unless being run under
external halting debug":
* HLT (when not being used for semihosting)
* DCPSR1, DCPS2, DCPS3
* DRPS
QEMU doesn't implement external halting debug, so for us the UNDEF is
the architecturally correct behaviour (because it's not possible to
execute these instructions with halting debug enabled). The
LOG_UNIMP doesn't serve a useful purpose; replace these uses of
unsupported_encoding() with unallocated_encoding(), and delete the
macro.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220509160443.3561604-1-peter.maydell@linaro.org
The Armv8.4 feature FEAT_IDST specifies that exceptions generated by
read accesses to the feature ID space should report a syndrome code
of 0x18 (EC_SYSTEMREGISTERTRAP) rather than 0x00 (EC_UNCATEGORIZED).
The feature ID space is defined to be:
op0 == 3, op1 == {0,1,3}, CRn == 0, CRm == {0-7}, op2 == {0-7}
In our implementation we might return the EC_UNCATEGORIZED syndrome
value for a system register access in four cases:
* no reginfo struct in the hashtable
* cp_access_ok() fails (ie ri->access doesn't permit the access)
* ri->accessfn returns CP_ACCESS_TRAP_UNCATEGORIZED at runtime
* ri->type includes ARM_CP_RAISES_EXC, and the readfn raises
an UNDEF exception at runtime
We have very few regdefs that set ARM_CP_RAISES_EXC, and none of
them are in the feature ID space. (In the unlikely event that any
are added in future they would need to take care of setting the
correct syndrome themselves.) This patch deals with the other
three cases, and enables FEAT_IDST for AArch64 -cpu max.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220509155457.3560724-1-peter.maydell@linaro.org
Enable the FEAT_S2FWB for -cpu max. Since FEAT_S2FWB requires that
CLIDR_EL1.{LoUU,LoUIS} are zero, we explicitly squash these (the
inherited CLIDR_EL1 value from the Cortex-A57 has them as 1).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220505183950.2781801-5-peter.maydell@linaro.org
Implement the handling of FEAT_S2FWB; the meat of this is in the new
combined_attrs_fwb() function which combines S1 and S2 attributes
when HCR_EL2.FWB is set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220505183950.2781801-4-peter.maydell@linaro.org
