b2ea18299b
Add PR markers
2011-09-10 08:13:45 +00:00
8dbb9eb3c6
opcodes/
...
* sparc-opc.c (sparc_opcodes): Add entry for 'save simm13,regrs1,regrd'
This has been reported as being accepted by the Sun assmebler.
gas/testsuite/
* gas/sparc/save-args.[sd]: New test.
* gas/sparc/sparc.exp: Run new test.
2011-09-08 19:03:17 +00:00
9bf29d72d4
opcodes/
...
The changes below bring 'mov' and 'ticc' instructions into line
with the V8 SPARC Architecture Manual.
* sparc-opc.c (sparc_opcodes): Add entry for 'ticc imm + regrs1'.
* sparc-opc.c (sparc_opcodes): Add alias entries for
'mov regrs2,%asrX'; 'mov regrs2,%y'; 'mov regrs2,%prs';
'mov regrs2,%wim' and 'mov regrs2,%tbr'.
* sparc-opc.c (sparc_opcodes): Move/Change entries for
'mov imm,%asrX'; 'mov imm,%y'; 'mov imm,%prs'; 'mov imm,%wim'
and 'mov imm,%tbr'.
* sparc-opc.c (sparc_opcodes): Add wr alias entries to match above
mov aliases.
gas/testsuite/
* gas/sparc/ticc-imm-reg.[sd]: New test.
* gas/sparc/v8-movwr-imm.[sd]: New test.
* gas/sparc/sparc.exp: Run new tests.
2011-09-08 19:01:11 +00:00
cdf492019f
opcodes/
...
* sparc-opc.c (pdistn): Destination is integer not float register.
gas/testsuite/
* gas/sparc/hpcvis3.s: Correct pdistn test.
* gas/sparc/hpcvis3.d: Likewise.
2011-09-08 16:40:47 +00:00
96e67898bc
* gas/testsuite/gas/m68k/all.exp: Run "mode5" test also with -mcpu=5200.
...
* gas/testsuite/gas/m68k/mode5.s: Add moveml testcases.
* gas/testsuite/gas/m68k/mode5.d: Update.
* opcodes/m68k-opc.c: Use "y" in moveml pattern for mcfisa_a.
2011-09-07 20:56:09 +00:00
7cf8042268
Updated Spanish translations.
2011-08-26 15:15:52 +00:00
dc15e575ad
Move cpu files from cgen/cpu to top level cpu directory.
2011-08-22 15:25:07 +00:00
dec0624dcd
gas/
...
* config/tc-mips.c (mips_set_options): Add ase_mcu.
(mips_opts): Initialise ase_mcu to -1.
(ISA_SUPPORTS_MCU_ASE): New macro.
(MIPS_CPU_ASE_MCU): Likewise.
(is_opcode_valid): Handle MCU.
(macro_build, macro): Likewise.
(validate_mips_insn, validate_micromips_insn): Likewise.
(mips_ip): Likewise.
(options): Add OPTION_MCU and OPTION_NO_MCU.
(md_longopts): Add mmcu and mno-mcu.
(md_parse_option): Handle OPTION_MCU and OPTION_NO_MCU.
(mips_after_parse_args): Handle MCU.
(s_mipsset): Likewise.
(md_show_usage): Handle MCU options.
* doc/as.texinfo: Document -mmcu and -mno-mcu options.
* doc/c-mips.texi: Likewise, and document ".set mcu" and
".set nomcu" directives.
gas/testsuite/
* gas/mips/micromips@mcu.d: New test.
* gas/mips/mcu.d: Likewise.
* gas/mips/mcu.s: New test source.
* gas/mips/mips.exp: Run the new tests.
include/opcode/
* mips.h (OP_MASK_3BITPOS, OP_SH_3BITPOS): New macros.
(OP_MASK_OFFSET12, OP_SH_OFFSET12): Redefine.
(INSN_ASE_MASK): Add the MCU bit.
(INSN_MCU): New macro.
(M_ACLR_AB, M_ACLR_OB, M_ASET_AB, M_ASET_OB): New enum values.
(MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): New macros.
opcodes/
* mips-dis.c (mips_arch_choices): Enable MCU for "mips32r2"
and "mips64r2".
(print_insn_args, print_insn_micromips): Handle MCU.
* micromips-opc.c (MC): New macro.
(micromips_opcodes): Add "aclr", "aset" and "iret".
* mips-opc.c (MC): New macro.
(mips_builtin_opcodes): Add "aclr", "aset" and "iret".
2011-08-09 15:20:03 +00:00
2b0c8b40ed
include/opcode/
...
* mips.h (INSN_WRITE_GPR_S, INSN2_WRITE_GPR_MB): New macros.
(INSN2_READ_GPR_MC, INSN2_READ_GPR_ME): Likewise.
(INSN2_WRITE_GPR_MF, INSN2_READ_GPR_MG): Likewise.
(INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ): Likewise.
(INSN2_READ_GPR_MP, INSN2_WRITE_GPR_MP): Likewise.
(INSN2_READ_GPR_MQ, INSN2_WRITE_GPR_MHI): Likewise.
(INSN2_READ_GPR_MMN): Likewise.
(INSN2_READ_FPR_D): Change the bit used.
(INSN2_MOD_GPR_MD, INSN2_MOD_GPR_MF): Likewise.
(INSN2_MOD_SP, INSN2_READ_GPR_31, INSN2_READ_GP): Likewise.
(INSN2_READ_PC, INSN2_UNCOND_BRANCH): Likewise.
(INSN2_COND_BRANCH): Likewise.
(INSN2_WRITE_GPR_S, INSN2_MOD_GPR_MB): Remove macros.
(INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG): Likewise.
(INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP, INSN2_MOD_GPR_MQ): Likewise.
(INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM): Likewise.
(INSN2_MOD_GPR_MN): Likewise.
gas/
* config/tc-mips.c (gpr_mod_mask): Remove INSN2_MOD_GPR_MB,
INSN2_MOD_GPR_MC, INSN2_MOD_GPR_ME, INSN2_MOD_GPR_MG,
INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MM,
INSN2_MOD_GPR_MN, INSN2_MOD_GPR_MP and INSN2_MOD_GPR_MQ opcode
register use checks.
(gpr_read_mask): Add INSN2_READ_GPR_MC, INSN2_READ_GPR_ME
INSN2_READ_GPR_MG, INSN2_READ_GPR_MJ, INSN2_READ_GPR_MMN,
INSN2_READ_GPR_MP and INSN2_READ_GPR_MQ opcode register use
checks.
(gpr_write_mask): Replace INSN2_WRITE_GPR_S opcode register
use flag with INSN_WRITE_GPR_S. Add INSN2_WRITE_GPR_MB,
INSN2_WRITE_GPR_MHI, INSN2_WRITE_GPR_MJ and INSN2_WRITE_GPR_MP
opcode register use checks.
(can_swap_branch_p): Enable microMIPS branch swapping.
(append_insn): Likewise.
gas/testsuite/
* gas/mips/micromips.d: Update according to changes to enable
microMIPS branch swapping.
* gas/mips/micromips-trap.d: Likewise.
* gas/mips/micromips@jal-svr4pic.d: Likewise.
* gas/mips/micromips@loc-swap.d: Likewise.
* gas/mips/micromips@loc-swap-dis.d: Likewise.
opcodes/
* micromips-opc.c (MOD_mb, MOD_mc, MOD_md): Remove macros.
(MOD_me, MOD_mf, MOD_mg, MOD_mhi, MOD_mj, MOD_ml): Likewise.
(MOD_mm, MOD_mn, MOD_mp, MOD_mq, MOD_sp): Likewise.
(WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf): New macros.
(RD_mg, WR_mhi, RD_mj, WR_mj, RD_ml, RD_mmn): Likewise.
(RD_mp, WR_mp, RD_mq, RD_sp, WR_sp): Likewise.
(WR_s): Update macro.
(micromips_opcodes): Update register use flags of: "addiu",
"addiupc", "addiur1sp", "addiur2", "addius5", "addiusp", "addu",
"and", "andi", "beq", "beqz", "bne", "bnez", "di", "ei", "j",
"jalr", "jalrs", "jr", "jraddiusp", "jrc", "lbu", "lhu", "li",
"lui", "lw", "lwm", "mfhi", "mflo", "move", "movep", "not",
"nor", "or", "ori", "sb", "sh", "sll", "srl", "subu", "sw",
"swm" and "xor" instructions.
2011-08-09 14:25:29 +00:00
ea783ef3a0
include/opcode/
...
* sparc.h: Document new format codes '4', '5', and '('.
(OPF_LOW4, RS3): New macros.
opcodes/
* sparc-dis.c (v9a_ast_reg_names): Add "cps".
(X_RS3): New macro.
(print_insn_sparc): Handle '4', '5', and '(' format codes.
Accept %asr numbers below 28.
* sparc-opc.c (sparc_opcodes): Add entries for HPC and VIS3
instructions.
gas/
* config/tc-sparc.c (v9a_asr_table): Add "cps".
(sparc_ip): Handle '4', '5' and '(' format codes.
gas/testsuite
* gas/sparc/hpcvis3.d: New test.
* gas/sparc/hpcvis3.s: New test source.
* gas/sparc/sparc.exp: Run new test.
2011-08-05 16:52:50 +00:00
3929df0978
opcodes/
...
2011-08-02 Quentin Neill <quentin.neill@amd.com>
* i386-dis.c (xop_table): Remove spurious bextr insn.
2011-08-02 19:58:06 +00:00
d7921315ba
Check R_X86_64_32 overflow and allow R_X86_64_64 for x32.
...
bfd/
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13048
* archures.c (bfd_mach_i386_intel_syntax): New.
(bfd_mach_i386_i8086): Updated.
(bfd_mach_i386_i386): Likewise.
(bfd_mach_x86_64): Likewise.
(bfd_mach_x64_32): Likewise.
(bfd_mach_i386_i386_intel_syntax): Likewise.
(bfd_mach_x86_64_intel_syntax): Likewise.
(bfd_mach_x64_32_intel_syntax): Likewise.
(bfd_mach_l1om): Likewise.
(bfd_mach_l1om_intel_syntax): Likewise.
(bfd_mach_k1om): Likewise.
(bfd_mach_k1om_intel_syntax): Likewise.
* bfd-in2.h: Regenerated.
* cpu-i386.c (bfd_i386_compatible): Check mach instead of
bits_per_address.
(bfd_x64_32_arch_intel_syntax): Set bits_per_address to 64.
(bfd_x64_32_arch): Likewise.
* elf64-x86-64.c: Include "libiberty.h".
(x86_64_elf_howto_table): Append x32 R_X86_64_32.
(elf_x86_64_rtype_to_howto): Support x32 R_X86_64_32.
(elf_x86_64_reloc_type_lookup): Likewise.
(elf_x86_64_reloc_name_lookup): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_check_relocs): Allow R_X86_64_64 relocations for x32.
gas/
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13048
* config/tc-i386.c (handle_quad): Removed.
(md_pseudo_table): Remove "quad".
(tc_gen_reloc): Don't check BFD_RELOC_64 for disallow_64bit_reloc.
(x86_dwarf2_addr_size): New.
* config/tc-i386.h (x86_dwarf2_addr_size): New.
(DWARF2_ADDR_SIZE): Likewise.
gas/testsuite/
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13048
* gas/i386/ilp32/ilp32.exp: Don't run inval.
* gas/i386/ilp32/inval.l: Removed.
* gas/i386/ilp32/inval.s: Likewise.
* gas/i386/ilp32/quad.d: Expect R_X86_64_64 instead of
R_X86_64_32.
* gas/i386/ilp32/x86-64-pcrel.s: Add tests for movabs.
* gas/i386/ilp32/x86-64-pcrel.d: Updated.
ld/testsuite/
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13048
* ld-x86-64/ilp32-6.d: New.
* ld-x86-64/ilp32-6.s: Likewise.
* ld-x86-64/ilp32-7.d: Likewise.
* ld-x86-64/ilp32-7.s: Likewise.
* ld-x86-64/ilp32-8.d: Likewise.
* ld-x86-64/ilp32-8.s: Likewise.
* ld-x86-64/ilp32-9.d: Likewise.
* ld-x86-64/ilp32-9.s: Likewise.
* ld-x86-64/x86-64.exp: Run ilp32-6, ilp32-7, ilp32-8 and ilp32-9.
opcodes/
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR ld/13048
* i386-dis.c (print_insn): Optimize info->mach check.
2011-08-01 23:04:23 +00:00
00f51a41a8
Add Disp32S to 64bit call.
...
gas/testsuite/
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR gas/13046
* gas/i386/x86-64-branch.s: Add tests for direct branch.
* gas/i386/x86-64-branch.d: Updated.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
opcodes/
2011-08-01 H.J. Lu <hongjiu.lu@intel.com>
PR gas/13046
* i386-opc.tbl: Add Disp32S to 64bit call.
* i386-tbl.h: Regenerated.
2011-08-01 19:25:48 +00:00
f65c50ad0c
Fix misapplied patch.
2011-07-24 14:57:31 +00:00
df58fc944d
bfd/
...
2011-02-25 Chao-ying Fu <fu@mips.com>
Ilie Garbacea <ilie@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
Richard Sandiford <rdsandiford@googlemail.com>
* archures.c (bfd_mach_mips_micromips): New macro.
* cpu-mips.c (I_micromips): New enum value.
(arch_info_struct): Add bfd_mach_mips_micromips.
* elfxx-mips.h (_bfd_mips_elf_is_target_special_symbol): New
prototype.
(_bfd_mips_elf_relax_section): Likewise.
(_bfd_mips16_elf_reloc_unshuffle): Rename to...
(_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS
ASE.
(_bfd_mips16_elf_reloc_shuffle): Rename to...
(_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE.
(gprel16_reloc_p): Handle microMIPS ASE.
(literal_reloc_p): New function.
* elf32-mips.c (elf_micromips_howto_table_rel): New variable.
(_bfd_mips_elf32_gprel16_reloc): Handle microMIPS ASE.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(mips_elf_gprel32_reloc): Update comment.
(micromips_reloc_map): New variable.
(bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE.
(mips_elf32_rtype_to_howto): Likewise.
(mips_info_to_howto_rel): Likewise.
(bfd_elf32_bfd_is_target_special_symbol): Define.
(bfd_elf32_bfd_relax_section): Likewise.
* elf64-mips.c (micromips_elf64_howto_table_rel): New variable.
(micromips_elf64_howto_table_rela): Likewise.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(micromips_reloc_map): Likewise.
(bfd_elf64_bfd_reloc_type_lookup): Handle microMIPS ASE.
(bfd_elf64_bfd_reloc_name_lookup): Likewise.
(mips_elf64_rtype_to_howto): Likewise.
(bfd_elf64_bfd_is_target_special_symbol): Define.
* elfn32-mips.c (elf_micromips_howto_table_rel): New variable.
(elf_micromips_howto_table_rela): Likewise.
(mips16_gprel_reloc): Update for _bfd_mips_elf_reloc_unshuffle
and _bfd_mips_elf_reloc_shuffle changes.
(micromips_reloc_map): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Handle microMIPS ASE.
(bfd_elf32_bfd_reloc_name_lookup): Likewise.
(mips_elf_n32_rtype_to_howto): Likewise.
(bfd_elf32_bfd_is_target_special_symbol): Define.
* elfxx-mips.c (LA25_LUI_MICROMIPS_1): New macro.
(LA25_LUI_MICROMIPS_2): Likewise.
(LA25_J_MICROMIPS_1, LA25_J_MICROMIPS_2): Likewise.
(LA25_ADDIU_MICROMIPS_1, LA25_ADDIU_MICROMIPS_2): Likewise.
(TLS_RELOC_P): Handle microMIPS ASE.
(mips_elf_create_stub_symbol): Adjust value of stub symbol if
target is a microMIPS function.
(micromips_reloc_p): New function.
(micromips_reloc_shuffle_p): Likewise.
(got16_reloc_p, call16_reloc_p): Handle microMIPS ASE.
(got_disp_reloc_p, got_page_reloc_p): New functions.
(got_ofst_reloc_p): Likewise.
(got_hi16_reloc_p, got_lo16_reloc_p): Likewise.
(call_hi16_reloc_p, call_lo16_reloc_p): Likewise.
(hi16_reloc_p, lo16_reloc_p, jal_reloc_p): Handle microMIPS ASE.
(micromips_branch_reloc_p): New function.
(tls_gd_reloc_p, tls_ldm_reloc_p): Likewise.
(tls_gottprel_reloc_p): Likewise.
(_bfd_mips16_elf_reloc_unshuffle): Rename to...
(_bfd_mips_elf_reloc_unshuffle): ... this. Handle microMIPS
ASE.
(_bfd_mips16_elf_reloc_shuffle): Rename to...
(_bfd_mips_elf_reloc_shuffle): ... this. Handle microMIPS ASE.
(_bfd_mips_elf_lo16_reloc): Handle microMIPS ASE.
(mips_tls_got_index, mips_elf_got_page): Likewise.
(mips_elf_create_local_got_entry): Likewise.
(mips_elf_relocation_needs_la25_stub): Likewise.
(mips_elf_calculate_relocation): Likewise.
(mips_elf_perform_relocation): Likewise.
(_bfd_mips_elf_symbol_processing): Likewise.
(_bfd_mips_elf_add_symbol_hook): Likewise.
(_bfd_mips_elf_link_output_symbol_hook): Likewise.
(mips_elf_add_lo16_rel_addend): Likewise.
(_bfd_mips_elf_check_relocs): Likewise.
(mips_elf_adjust_addend): Likewise.
(_bfd_mips_elf_relocate_section): Likewise.
(mips_elf_create_la25_stub): Likewise.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_elf_gc_sweep_hook): Likewise.
(_bfd_mips_elf_is_target_special_symbol): New function.
(mips_elf_relax_delete_bytes): Likewise.
(opcode_descriptor): New structure.
(RA): New macro.
(OP32_SREG, OP32_TREG, OP16_VALID_REG): Likewise.
(b_insns_32, bc_insn_32, bz_insn_32, bzal_insn_32): New variables.
(beq_insn_32): Likewise.
(b_insn_16, bz_insn_16): New variables.
(BZC32_REG_FIELD): New macro.
(bz_rs_insns_32, bz_rt_insns_32): New variables.
(bzc_insns_32, bz_insns_16):Likewise.
(BZ16_REG, BZ16_REG_FIELD): New macros.
(jal_insn_32_bd16, jal_insn_32_bd32): New variables.
(jal_x_insn_32_bd32): Likewise.
(j_insn_32, jalr_insn_32): Likewise.
(ds_insns_32_bd16, ds_insns_32_bd32): Likewise.
(jalr_insn_16_bd16, jalr_insn_16_bd32, jr_insn_16): Likewise.
(JR16_REG): New macro.
(ds_insns_16_bd16): New variable.
(lui_insn): Likewise.
(addiu_insn, addiupc_insn): Likewise.
(ADDIUPC_REG_FIELD): New macro.
(MOVE32_RD, MOVE32_RS): Likewise.
(MOVE16_RD_FIELD, MOVE16_RS_FIELD): Likewise.
(move_insns_32, move_insns_16): New variables.
(nop_insn_32, nop_insn_16): Likewise.
(MATCH): New macro.
(find_match): New function.
(check_br16_dslot, check_br32_dslot): Likewise.
(check_br16, check_br32): Likewise.
(IS_BITSIZE): New macro.
(check_4byte_branch): New function.
(_bfd_mips_elf_relax_section): Likewise.
(_bfd_mips_elf_merge_private_bfd_data): Disallow linking MIPS16
and microMIPS modules together.
(_bfd_mips_elf_print_private_bfd_data): Handle microMIPS ASE.
* reloc.c (BFD_RELOC_MICROMIPS_7_PCREL_S1): New relocation.
(BFD_RELOC_MICROMIPS_10_PCREL_S1): Likewise.
(BFD_RELOC_MICROMIPS_16_PCREL_S1): Likewise.
(BFD_RELOC_MICROMIPS_GPREL16): Likewise.
(BFD_RELOC_MICROMIPS_JMP, BFD_RELOC_MICROMIPS_HI16): Likewise.
(BFD_RELOC_MICROMIPS_HI16_S): Likewise.
(BFD_RELOC_MICROMIPS_LO16): Likewise.
(BFD_RELOC_MICROMIPS_LITERAL): Likewise.
(BFD_RELOC_MICROMIPS_GOT16): Likewise.
(BFD_RELOC_MICROMIPS_CALL16): Likewise.
(BFD_RELOC_MICROMIPS_GOT_HI16): Likewise.
(BFD_RELOC_MICROMIPS_GOT_LO16): Likewise.
(BFD_RELOC_MICROMIPS_CALL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_CALL_LO16): Likewise.
(BFD_RELOC_MICROMIPS_SUB): Likewise.
(BFD_RELOC_MICROMIPS_GOT_PAGE): Likewise.
(BFD_RELOC_MICROMIPS_GOT_OFST): Likewise.
(BFD_RELOC_MICROMIPS_GOT_DISP): Likewise.
(BFD_RELOC_MICROMIPS_HIGHEST): Likewise.
(BFD_RELOC_MICROMIPS_HIGHER): Likewise.
(BFD_RELOC_MICROMIPS_SCN_DISP): Likewise.
(BFD_RELOC_MICROMIPS_JALR): Likewise.
(BFD_RELOC_MICROMIPS_TLS_GD): Likewise.
(BFD_RELOC_MICROMIPS_TLS_LDM): Likewise.
(BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_GOTTPREL): Likewise.
(BFD_RELOC_MICROMIPS_TLS_TPREL_HI16): Likewise.
(BFD_RELOC_MICROMIPS_TLS_TPREL_LO16): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* readelf.c (get_machine_flags): Handle microMIPS ASE.
(get_mips_symbol_other): Likewise.
gas/
2011-02-25 Maciej W. Rozycki <macro@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.h (mips_segment_info): Add one bit for
microMIPS.
(TC_LABEL_IS_LOCAL): New macro.
(mips_label_is_local): New prototype.
* config/tc-mips.c (S0, S7): New macros.
(emit_branch_likely_macro): New variable.
(mips_set_options): Add micromips.
(mips_opts): Initialise micromips to -1.
(file_ase_micromips): New variable.
(CPU_HAS_MICROMIPS): New macro.
(hilo_interlocks): Set for microMIPS too.
(gpr_interlocks): Likewise.
(cop_interlocks): Likewise.
(cop_mem_interlocks): Likewise.
(HAVE_CODE_COMPRESSION): New macro.
(micromips_op_hash): New variable.
(micromips_nop16_insn, micromips_nop32_insn): New variables.
(NOP_INSN): Handle microMIPS ASE.
(mips32_to_micromips_reg_b_map): New macro.
(mips32_to_micromips_reg_c_map): Likewise.
(mips32_to_micromips_reg_d_map): Likewise.
(mips32_to_micromips_reg_e_map): Likewise.
(mips32_to_micromips_reg_f_map): Likewise.
(mips32_to_micromips_reg_g_map): Likewise.
(mips32_to_micromips_reg_l_map): Likewise.
(mips32_to_micromips_reg_n_map): Likewise.
(mips32_to_micromips_reg_h_map): New variable.
(mips32_to_micromips_reg_m_map): Likewise.
(mips32_to_micromips_reg_q_map): Likewise.
(micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_to_32_reg_b_map): New macro.
(micromips_to_32_reg_c_map): Likewise.
(micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map): Likewise.
(micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map): Likewise.
(micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_n_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): New macros.
(RELAX_DELAY_SLOT_16BIT): New macro.
(RELAX_DELAY_SLOT_SIZE_FIRST): Likewise.
(RELAX_DELAY_SLOT_SIZE_SECOND): Likewise.
(RELAX_MICROMIPS_ENCODE, RELAX_MICROMIPS_P): New macros.
(RELAX_MICROMIPS_TYPE, RELAX_MICROMIPS_AT): Likewise.
(RELAX_MICROMIPS_U16BIT, RELAX_MICROMIPS_UNCOND): Likewise.
(RELAX_MICROMIPS_COMPACT, RELAX_MICROMIPS_LINK): Likewise.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16): Likewise.
(RELAX_MICROMIPS_MARK_TOOFAR16): Likewise.
(RELAX_MICROMIPS_CLEAR_TOOFAR16): Likewise.
(RELAX_MICROMIPS_TOOFAR32): Likewise.
(RELAX_MICROMIPS_MARK_TOOFAR32): Likewise.
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Likewise.
(INSERT_OPERAND, EXTRACT_OPERAND): Handle microMIPS ASE.
(mips_macro_warning): Add delay_slot_16bit_p, delay_slot_32bit_p,
fsize and insns.
(mips_mark_labels): New function.
(mips16_small, mips16_ext): Remove variables, replacing with...
(forced_insn_size): ... this.
(append_insn, mips16_ip): Update accordingly.
(micromips_insn_length): New function.
(insn_length): Return the length of microMIPS instructions.
(mips_record_mips16_mode): Rename to...
(mips_record_compressed_mode): ... this. Handle microMIPS ASE.
(install_insn): Handle microMIPS ASE.
(reglist_lookup): New function.
(is_size_valid, is_delay_slot_valid): Likewise.
(md_begin): Handle microMIPS ASE.
(md_assemble): Likewise. Update for append_insn interface change.
(micromips_reloc_p): New function.
(got16_reloc_p): Handle microMIPS ASE.
(hi16_reloc_p): Likewise.
(lo16_reloc_p): Likewise.
(jmp_reloc_p): New function.
(jalr_reloc_p): Likewise.
(matching_lo_reloc): Handle microMIPS ASE.
(insn_uses_reg, reg_needs_delay): Likewise.
(mips_move_labels): Likewise.
(mips16_mark_labels): Rename to...
(mips_compressed_mark_labels): ... this. Handle microMIPS ASE.
(gpr_mod_mask): New function.
(gpr_read_mask, gpr_write_mask): Handle microMIPS ASE.
(fpr_read_mask, fpr_write_mask): Likewise.
(insns_between, nops_for_vr4130, nops_for_insn): Likewise.
(fix_loongson2f_nop, fix_loongson2f_jump): Likewise.
(MICROMIPS_LABEL_CHAR): New macro.
(micromips_target_label, micromips_target_name): New variables.
(micromips_label_name, micromips_label_expr): New functions.
(micromips_label_inc, micromips_add_label): Likewise.
(mips_label_is_local): Likewise.
(micromips_map_reloc): Likewise.
(can_swap_branch_p): Handle microMIPS ASE.
(append_insn): Add expansionp argument. Handle microMIPS ASE.
(start_noreorder, end_noreorder): Handle microMIPS ASE.
(macro_start, macro_warning, macro_end): Likewise.
(brk_fmt, cop12_fmt, jalr_fmt, lui_fmt): New variables.
(mem12_fmt, mfhl_fmt, shft_fmt, trap_fmt): Likewise.
(BRK_FMT, COP12_FMT, JALR_FMT, LUI_FMT): New macros.
(MEM12_FMT, MFHL_FMT, SHFT_FMT, TRAP_FMT): Likewise.
(macro_build): Handle microMIPS ASE. Update for append_insn
interface change.
(mips16_macro_build): Update for append_insn interface change.
(macro_build_jalr): Handle microMIPS ASE.
(macro_build_lui): Likewise. Simplify.
(load_register): Handle microMIPS ASE.
(load_address): Likewise.
(move_register): Likewise.
(macro_build_branch_likely): New function.
(macro_build_branch_ccl): Likewise.
(macro_build_branch_rs): Likewise.
(macro_build_branch_rsrt): Likewise.
(macro): Handle microMIPS ASE.
(validate_micromips_insn): New function.
(expr_const_in_range): Likewise.
(mips_ip): Handle microMIPS ASE.
(options): Add OPTION_MICROMIPS and OPTION_NO_MICROMIPS.
(md_longopts): Add mmicromips and mno-micromips.
(md_parse_option): Handle OPTION_MICROMIPS and
OPTION_NO_MICROMIPS.
(mips_after_parse_args): Handle microMIPS ASE.
(md_pcrel_from): Handle microMIPS relocations.
(mips_force_relocation): Likewise.
(md_apply_fix): Likewise.
(mips_align): Handle microMIPS ASE.
(s_mipsset): Likewise.
(s_cpload, s_cpsetup, s_cpreturn): Use relocation wrappers.
(s_dtprel_internal): Likewise.
(s_gpword, s_gpdword): Likewise.
(s_insn): Handle microMIPS ASE.
(s_mips_stab): Likewise.
(relaxed_micromips_32bit_branch_length): New function.
(relaxed_micromips_16bit_branch_length): New function.
(md_estimate_size_before_relax): Handle microMIPS ASE.
(mips_fix_adjustable): Likewise.
(tc_gen_reloc): Handle microMIPS relocations.
(mips_relax_frag): Handle microMIPS ASE.
(md_convert_frag): Likewise.
(mips_frob_file_after_relocs): Likewise.
(mips_elf_final_processing): Likewise.
(mips_nop_opcode): Likewise.
(mips_handle_align): Likewise.
(md_show_usage): Handle microMIPS options.
* symbols.c (TC_LABEL_IS_LOCAL): New macro.
(S_IS_LOCAL): Add a TC_LABEL_IS_LOCAL check.
* doc/as.texinfo (Target MIPS options): Add -mmicromips and
-mno-micromips.
(-mmicromips, -mno-micromips): New options.
* doc/c-mips.texi (-mmicromips, -mno-micromips): New options.
(MIPS ISA): Document .set micromips and .set nomicromips.
(MIPS insn): Update for microMIPS support.
gas/testsuite/
2011-02-25 Maciej W. Rozycki <macro@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Richard Sandiford <rdsandiford@googlemail.com>
* gas/mips/micromips.d: New test.
* gas/mips/micromips-branch-delay.d: Likewise.
* gas/mips/micromips-branch-relax.d: Likewise.
* gas/mips/micromips-branch-relax-pic.d: Likewise.
* gas/mips/micromips-size-1.d: Likewise.
* gas/mips/micromips-trap.d: Likewise.
* gas/mips/micromips.l: New stderr output.
* gas/mips/micromips-branch-delay.l: Likewise.
* gas/mips/micromips-branch-relax.l: Likewise.
* gas/mips/micromips-branch-relax-pic.l: Likewise.
* gas/mips/micromips-size-0.l: New list test.
* gas/mips/micromips-size-1.l: New stderr output.
* gas/mips/micromips.s: New test source.
* gas/mips/micromips-branch-delay.s: Likewise.
* gas/mips/micromips-branch-relax.s: Likewise.
* gas/mips/micromips-size-0.s: Likewise.
* gas/mips/micromips-size-1.s: Likewise.
* gas/mips/mips.exp: Run the new tests.
* gas/mips/dli.s: Use .p2align.
* gas/mips/elf_ase_micromips.d: New test.
* gas/mips/elf_ase_micromips-2.d: Likewise.
* gas/mips/micromips@abs.d: Likewise.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/micromips@alnv_ps-swap.d: Likewise.
* gas/mips/micromips@and.d: Likewise.
* gas/mips/micromips@beq.d: Likewise.
* gas/mips/micromips@bge.d: Likewise.
* gas/mips/micromips@bgeu.d: Likewise.
* gas/mips/micromips@blt.d: Likewise.
* gas/mips/micromips@bltu.d: Likewise.
* gas/mips/micromips@branch-likely.d: Likewise.
* gas/mips/micromips@branch-misc-1.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/micromips@branch-misc-4.d: Likewise.
* gas/mips/micromips@branch-self.d: Likewise.
* gas/mips/micromips@cache.d: Likewise.
* gas/mips/micromips@daddi.d: Likewise.
* gas/mips/micromips@dli.d: Likewise.
* gas/mips/micromips@elf-jal.d: Likewise.
* gas/mips/micromips@elf-rel2.d: Likewise.
* gas/mips/micromips@elfel-rel2.d: Likewise.
* gas/mips/micromips@elf-rel4.d: Likewise.
* gas/mips/micromips@jal-svr4pic.d: Likewise.
* gas/mips/micromips@jal-svr4pic-noreorder.d: Likewise.
* gas/mips/micromips@lb-svr4pic-ilocks.d: Likewise.
* gas/mips/micromips@li.d: Likewise.
* gas/mips/micromips@loc-swap-dis.d: Likewise.
* gas/mips/micromips@loc-swap.d: Likewise.
* gas/mips/micromips@mips1-fp.d: Likewise.
* gas/mips/micromips@mips32-cp2.d: Likewise.
* gas/mips/micromips@mips32-imm.d: Likewise.
* gas/mips/micromips@mips32-sf32.d: Likewise.
* gas/mips/micromips@mips32.d: Likewise.
* gas/mips/micromips@mips32r2-cp2.d: Likewise.
* gas/mips/micromips@mips32r2-fp32.d: Likewise.
* gas/mips/micromips@mips32r2-sync.d: Likewise.
* gas/mips/micromips@mips32r2.d: Likewise.
* gas/mips/micromips@mips4-branch-likely.d: Likewise.
* gas/mips/micromips@mips4-fp.d: Likewise.
* gas/mips/micromips@mips4.d: Likewise.
* gas/mips/micromips@mips5.d: Likewise.
* gas/mips/micromips@mips64-cp2.d: Likewise.
* gas/mips/micromips@mips64.d: Likewise.
* gas/mips/micromips@mips64r2.d: Likewise.
* gas/mips/micromips@pref.d: Likewise.
* gas/mips/micromips@relax-at.d: Likewise.
* gas/mips/micromips@relax.d: Likewise.
* gas/mips/micromips@rol-hw.d: Likewise.
* gas/mips/micromips@uld2-eb.d: Likewise.
* gas/mips/micromips@uld2-el.d: Likewise.
* gas/mips/micromips@ulh2-eb.d: Likewise.
* gas/mips/micromips@ulh2-el.d: Likewise.
* gas/mips/micromips@ulw2-eb-ilocks.d: Likewise.
* gas/mips/micromips@ulw2-el-ilocks.d: Likewise.
* gas/mips/cache.d: Likewise.
* gas/mips/daddi.d: Likewise.
* gas/mips/mips32-imm.d: Likewise.
* gas/mips/pref.d: Likewise.
* gas/mips/elf-rel27.d: Handle microMIPS ASE.
* gas/mips/l_d.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/ld.d: Likewise.
* gas/mips/ld-n32.d: Likewise.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/s_d.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/sd.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/mips32.d: Update immediates.
* gas/mips/micromips@mips32-cp2.s: New test source.
* gas/mips/micromips@mips32-imm.s: Likewise.
* gas/mips/micromips@mips32r2-cp2.s: Likewise.
* gas/mips/micromips@mips64-cp2.s: Likewise.
* gas/mips/cache.s: Likewise.
* gas/mips/daddi.s: Likewise.
* gas/mips/mips32-imm.s: Likewise.
* gas/mips/elf-rel4.s: Handle microMIPS ASE.
* gas/mips/lb-pic.s: Likewise.
* gas/mips/ld.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips.exp: Add the micromips arch. Exclude mips16e
from micromips. Run mips32-imm.
* gas/mips/jal-mask-11.d: New test.
* gas/mips/jal-mask-12.d: Likewise.
* gas/mips/micromips@jal-mask-11.d: Likewise.
* gas/mips/jal-mask-1.s: Source for the new tests.
* gas/mips/jal-mask-21.d: New test.
* gas/mips/jal-mask-22.d: Likewise.
* gas/mips/micromips@jal-mask-12.d: Likewise.
* gas/mips/jal-mask-2.s: Source for the new tests.
* gas/mips/mips.exp: Run the new tests.
* gas/mips/mips16-e.d: Add --special-syms to `objdump'.
* gas/mips/tmips16-e.d: Likewise.
* gas/mips/mipsel16-e.d: Likewise.
* gas/mips/tmipsel16-e.d: Likewise.
* gas/mips/and.s: Adjust padding.
* gas/mips/beq.s: Likewise.
* gas/mips/bge.s: Likewise.
* gas/mips/bgeu.s: Likewise.
* gas/mips/blt.s: Likewise.
* gas/mips/bltu.s: Likewise.
* gas/mips/branch-misc-2.s: Likewise.
* gas/mips/jal.s: Likewise.
* gas/mips/li.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/mips4-fp.s: Likewise.
* gas/mips/relax.s: Likewise.
* gas/mips/and.d: Update accordingly.
* gas/mips/elf-jal.d: Likewise.
* gas/mips/jal.d: Likewise.
* gas/mips/li.d: Likewise.
* gas/mips/relax-at.d: Likewise.
* gas/mips/relax.d: Likewise.
include/elf/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (R_MICROMIPS_min): New relocations.
(R_MICROMIPS_26_S1): Likewise.
(R_MICROMIPS_HI16, R_MICROMIPS_LO16): Likewise.
(R_MICROMIPS_GPREL16, R_MICROMIPS_LITERAL): Likewise.
(R_MICROMIPS_GOT16, R_MICROMIPS_PC7_S1): Likewise.
(R_MICROMIPS_PC10_S1, R_MICROMIPS_PC16_S1): Likewise.
(R_MICROMIPS_CALL16, R_MICROMIPS_GOT_DISP): Likewise.
(R_MICROMIPS_GOT_PAGE, R_MICROMIPS_GOT_OFST): Likewise.
(R_MICROMIPS_GOT_HI16, R_MICROMIPS_GOT_LO16): Likewise.
(R_MICROMIPS_SUB, R_MICROMIPS_HIGHER): Likewise.
(R_MICROMIPS_HIGHEST, R_MICROMIPS_CALL_HI16): Likewise.
(R_MICROMIPS_CALL_LO16, R_MICROMIPS_SCN_DISP): Likewise.
(R_MICROMIPS_JALR, R_MICROMIPS_HI0_LO16): Likewise.
(R_MICROMIPS_TLS_GD, R_MICROMIPS_TLS_LDM): Likewise.
(R_MICROMIPS_TLS_DTPREL_HI, R_MICROMIPS_TLS_DTPREL_LO): Likewise.
(R_MICROMIPS_TLS_GOTTPREL): Likewise.
(R_MICROMIPS_TLS_TPREL_HI16): Likewise.
(R_MICROMIPS_TLS_TPREL_LO16): Likewise.
(R_MICROMIPS_GPREL7_S2, R_MICROMIPS_PC23_S2): Likewise.
(R_MICROMIPS_max): Likewise.
(EF_MIPS_ARCH_ASE_MICROMIPS): New macro.
(STO_MIPS_ISA, STO_MIPS_FLAGS): Likewise.
(ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT): Likewise.
(STO_MICROMIPS): Likewise.
(ELF_ST_IS_MICROMIPS, ELF_ST_SET_MICROMIPS): Likewise.
(ELF_ST_IS_COMPRESSED): Likewise.
(STO_MIPS_PLT, STO_MIPS_PIC): Rework.
(ELF_ST_IS_MIPS_PIC, ELF_ST_SET_MIPS_PIC): Likewise.
(STO_MIPS16, ELF_ST_IS_MIPS16, ELF_ST_SET_MIPS16): Likewise.
include/opcode/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (OP_MASK_EXTLSB, OP_SH_EXTLSB): New macros.
(OP_MASK_STYPE, OP_SH_STYPE): Likewise.
(OP_MASK_CODE10, OP_SH_CODE10): Likewise.
(OP_MASK_TRAP, OP_SH_TRAP): Likewise.
(OP_MASK_OFFSET12, OP_SH_OFFSET12): Likewise.
(OP_MASK_OFFSET10, OP_SH_OFFSET10): Likewise.
(OP_MASK_RS3, OP_SH_RS3): Likewise.
(OP_MASK_MB, OP_SH_MB, OP_MASK_MC, OP_SH_MC): Likewise.
(OP_MASK_MD, OP_SH_MD, OP_MASK_ME, OP_SH_ME): Likewise.
(OP_MASK_MF, OP_SH_MF, OP_MASK_MG, OP_SH_MG): Likewise.
(OP_MASK_MJ, OP_SH_MJ, OP_MASK_ML, OP_SH_ML): Likewise.
(OP_MASK_MP, OP_SH_MP, OP_MASK_MQ, OP_SH_MQ): Likewise.
(OP_MASK_IMMA, OP_SH_IMMA, OP_MASK_IMMB, OP_SH_IMMB): Likewise.
(OP_MASK_IMMC, OP_SH_IMMC, OP_MASK_IMMF, OP_SH_IMMF): Likewise.
(OP_MASK_IMMG, OP_SH_IMMG, OP_MASK_IMMH, OP_SH_IMMH): Likewise.
(OP_MASK_IMMI, OP_SH_IMMI, OP_MASK_IMMJ, OP_SH_IMMJ): Likewise.
(OP_MASK_IMML, OP_SH_IMML, OP_MASK_IMMM, OP_SH_IMMM): Likewise.
(OP_MASK_IMMN, OP_SH_IMMN, OP_MASK_IMMO, OP_SH_IMMO): Likewise.
(OP_MASK_IMMP, OP_SH_IMMP, OP_MASK_IMMQ, OP_SH_IMMQ): Likewise.
(OP_MASK_IMMU, OP_SH_IMMU, OP_MASK_IMMW, OP_SH_IMMW): Likewise.
(OP_MASK_IMMX, OP_SH_IMMX, OP_MASK_IMMY, OP_SH_IMMY): Likewise.
(INSN_WRITE_GPR_S): New macro.
(INSN2_BRANCH_DELAY_16BIT, INSN2_BRANCH_DELAY_32BIT): Likewise.
(INSN2_READ_FPR_D): Likewise.
(INSN2_MOD_GPR_MB, INSN2_MOD_GPR_MC): Likewise.
(INSN2_MOD_GPR_MD, INSN2_MOD_GPR_ME): Likewise.
(INSN2_MOD_GPR_MF, INSN2_MOD_GPR_MG): Likewise.
(INSN2_MOD_GPR_MJ, INSN2_MOD_GPR_MP): Likewise.
(INSN2_MOD_GPR_MQ, INSN2_MOD_SP): Likewise.
(INSN2_READ_GPR_31, INSN2_READ_GP, INSN2_READ_PC): Likewise.
(INSN2_UNCOND_BRANCH, INSN2_COND_BRANCH): Likewise.
(INSN2_MOD_GPR_MHI, INSN2_MOD_GPR_MM, INSN2_MOD_GPR_MN): Likewise.
(CPU_MICROMIPS): New macro.
(M_BC1FL, M_BC1TL, M_BC2FL, M_BC2TL): New enum values.
(M_BEQL, M_BGEZ, M_BGEZL, M_BGEZALL, M_BGTZ, M_BGTZL): Likewise.
(M_BLEZ, M_BLEZL, M_BLTZ, M_BLTZL, M_BLTZALL, M_BNEL): Likewise.
(M_CACHE_OB, M_JALS_1, M_JALS_2, M_JALS_A): Likewise.
(M_LDC2_OB, M_LDL_OB, M_LDM_AB, M_LDM_OB): Likewise.
(M_LDP_AB, M_LDP_OB, M_LDR_OB, M_LL_OB, M_LLD_OB): Likewise.
(M_LWC2_OB, M_LWL_OB, M_LWM_AB, M_LWM_OB): Likewise.
(M_LWP_AB, M_LWP_OB, M_LWR_OB): Likewise.
(M_LWU_OB, M_PREF_OB, M_SC_OB, M_SCD_OB): Likewise.
(M_SDC2_OB, M_SDL_OB, M_SDM_AB, M_SDM_OB): Likewise.
(M_SDP_AB, M_SDP_OB, M_SDR_OB): Likewise.
(M_SWC2_OB, M_SWL_OB, M_SWM_AB, M_SWM_OB): Likewise.
(M_SWP_AB, M_SWP_OB, M_SWR_OB): Likewise.
(MICROMIPSOP_MASK_MAJOR, MICROMIPSOP_SH_MAJOR): New macros.
(MICROMIPSOP_MASK_IMMEDIATE, MICROMIPSOP_SH_IMMEDIATE): Likewise.
(MICROMIPSOP_MASK_DELTA, MICROMIPSOP_SH_DELTA): Likewise.
(MICROMIPSOP_MASK_CODE10, MICROMIPSOP_SH_CODE10): Likewise.
(MICROMIPSOP_MASK_TRAP, MICROMIPSOP_SH_TRAP): Likewise.
(MICROMIPSOP_MASK_SHAMT, MICROMIPSOP_SH_SHAMT): Likewise.
(MICROMIPSOP_MASK_TARGET, MICROMIPSOP_SH_TARGET): Likewise.
(MICROMIPSOP_MASK_EXTLSB, MICROMIPSOP_SH_EXTLSB): Likewise.
(MICROMIPSOP_MASK_EXTMSBD, MICROMIPSOP_SH_EXTMSBD): Likewise.
(MICROMIPSOP_MASK_INSMSB, MICROMIPSOP_SH_INSMSB): Likewise.
(MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise.
(MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise.
(MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise.
(MICROMIPSOP_MASK_SEL, MICROMIPSOP_SH_SEL): Likewise.
(MICROMIPSOP_MASK_OFFSET12, MICROMIPSOP_SH_OFFSET12): Likewise.
(MICROMIPSOP_MASK_3BITPOS, MICROMIPSOP_SH_3BITPOS): Likewise.
(MICROMIPSOP_MASK_STYPE, MICROMIPSOP_SH_STYPE): Likewise.
(MICROMIPSOP_MASK_OFFSET10, MICROMIPSOP_SH_OFFSET10): Likewise.
(MICROMIPSOP_MASK_RS, MICROMIPSOP_SH_RS): Likewise.
(MICROMIPSOP_MASK_RT, MICROMIPSOP_SH_RT): Likewise.
(MICROMIPSOP_MASK_RD, MICROMIPSOP_SH_RD): Likewise.
(MICROMIPSOP_MASK_FS, MICROMIPSOP_SH_FS): Likewise.
(MICROMIPSOP_MASK_FT, MICROMIPSOP_SH_FT): Likewise.
(MICROMIPSOP_MASK_FD, MICROMIPSOP_SH_FD): Likewise.
(MICROMIPSOP_MASK_FR, MICROMIPSOP_SH_FR): Likewise.
(MICROMIPSOP_MASK_RS3, MICROMIPSOP_SH_RS3): Likewise.
(MICROMIPSOP_MASK_PREFX, MICROMIPSOP_SH_PREFX): Likewise.
(MICROMIPSOP_MASK_BCC, MICROMIPSOP_SH_BCC): Likewise.
(MICROMIPSOP_MASK_CCC, MICROMIPSOP_SH_CCC): Likewise.
(MICROMIPSOP_MASK_COPZ, MICROMIPSOP_SH_COPZ): Likewise.
(MICROMIPSOP_MASK_MB, MICROMIPSOP_SH_MB): Likewise.
(MICROMIPSOP_MASK_MC, MICROMIPSOP_SH_MC): Likewise.
(MICROMIPSOP_MASK_MD, MICROMIPSOP_SH_MD): Likewise.
(MICROMIPSOP_MASK_ME, MICROMIPSOP_SH_ME): Likewise.
(MICROMIPSOP_MASK_MF, MICROMIPSOP_SH_MF): Likewise.
(MICROMIPSOP_MASK_MG, MICROMIPSOP_SH_MG): Likewise.
(MICROMIPSOP_MASK_MH, MICROMIPSOP_SH_MH): Likewise.
(MICROMIPSOP_MASK_MI, MICROMIPSOP_SH_MI): Likewise.
(MICROMIPSOP_MASK_MJ, MICROMIPSOP_SH_MJ): Likewise.
(MICROMIPSOP_MASK_ML, MICROMIPSOP_SH_ML): Likewise.
(MICROMIPSOP_MASK_MM, MICROMIPSOP_SH_MM): Likewise.
(MICROMIPSOP_MASK_MN, MICROMIPSOP_SH_MN): Likewise.
(MICROMIPSOP_MASK_MP, MICROMIPSOP_SH_MP): Likewise.
(MICROMIPSOP_MASK_MQ, MICROMIPSOP_SH_MQ): Likewise.
(MICROMIPSOP_MASK_IMMA, MICROMIPSOP_SH_IMMA): Likewise.
(MICROMIPSOP_MASK_IMMB, MICROMIPSOP_SH_IMMB): Likewise.
(MICROMIPSOP_MASK_IMMC, MICROMIPSOP_SH_IMMC): Likewise.
(MICROMIPSOP_MASK_IMMD, MICROMIPSOP_SH_IMMD): Likewise.
(MICROMIPSOP_MASK_IMME, MICROMIPSOP_SH_IMME): Likewise.
(MICROMIPSOP_MASK_IMMF, MICROMIPSOP_SH_IMMF): Likewise.
(MICROMIPSOP_MASK_IMMG, MICROMIPSOP_SH_IMMG): Likewise.
(MICROMIPSOP_MASK_IMMH, MICROMIPSOP_SH_IMMH): Likewise.
(MICROMIPSOP_MASK_IMMI, MICROMIPSOP_SH_IMMI): Likewise.
(MICROMIPSOP_MASK_IMMJ, MICROMIPSOP_SH_IMMJ): Likewise.
(MICROMIPSOP_MASK_IMML, MICROMIPSOP_SH_IMML): Likewise.
(MICROMIPSOP_MASK_IMMM, MICROMIPSOP_SH_IMMM): Likewise.
(MICROMIPSOP_MASK_IMMN, MICROMIPSOP_SH_IMMN): Likewise.
(MICROMIPSOP_MASK_IMMO, MICROMIPSOP_SH_IMMO): Likewise.
(MICROMIPSOP_MASK_IMMP, MICROMIPSOP_SH_IMMP): Likewise.
(MICROMIPSOP_MASK_IMMQ, MICROMIPSOP_SH_IMMQ): Likewise.
(MICROMIPSOP_MASK_IMMU, MICROMIPSOP_SH_IMMU): Likewise.
(MICROMIPSOP_MASK_IMMW, MICROMIPSOP_SH_IMMW): Likewise.
(MICROMIPSOP_MASK_IMMX, MICROMIPSOP_SH_IMMX): Likewise.
(MICROMIPSOP_MASK_IMMY, MICROMIPSOP_SH_IMMY): Likewise.
(MICROMIPSOP_MASK_CODE, MICROMIPSOP_SH_CODE): Likewise.
(MICROMIPSOP_MASK_CODE2, MICROMIPSOP_SH_CODE2): Likewise.
(MICROMIPSOP_MASK_CACHE, MICROMIPSOP_SH_CACHE): Likewise.
(MICROMIPSOP_MASK_CODE20, MICROMIPSOP_SH_CODE20): Likewise.
(MICROMIPSOP_MASK_PERFREG, MICROMIPSOP_SH_PERFREG): Likewise.
(MICROMIPSOP_MASK_CODE19, MICROMIPSOP_SH_CODE19): Likewise.
(MICROMIPSOP_MASK_ALN, MICROMIPSOP_SH_ALN): Likewise.
(MICROMIPSOP_MASK_VECBYTE, MICROMIPSOP_SH_VECBYTE): Likewise.
(MICROMIPSOP_MASK_VECALIGN, MICROMIPSOP_SH_VECALIGN): Likewise.
(MICROMIPSOP_MASK_DSPACC, MICROMIPSOP_SH_DSPACC): Likewise.
(MICROMIPSOP_MASK_DSPACC_S, MICROMIPSOP_SH_DSPACC_S): Likewise.
(MICROMIPSOP_MASK_DSPSFT, MICROMIPSOP_SH_DSPSFT): Likewise.
(MICROMIPSOP_MASK_DSPSFT_7, MICROMIPSOP_SH_DSPSFT_7): Likewise.
(MICROMIPSOP_MASK_SA3, MICROMIPSOP_SH_SA3): Likewise.
(MICROMIPSOP_MASK_SA4, MICROMIPSOP_SH_SA4): Likewise.
(MICROMIPSOP_MASK_IMM8, MICROMIPSOP_SH_IMM8): Likewise.
(MICROMIPSOP_MASK_IMM10, MICROMIPSOP_SH_IMM10): Likewise.
(MICROMIPSOP_MASK_WRDSP, MICROMIPSOP_SH_WRDSP): Likewise.
(MICROMIPSOP_MASK_RDDSP, MICROMIPSOP_SH_RDDSP): Likewise.
(MICROMIPSOP_MASK_BP, MICROMIPSOP_SH_BP): Likewise.
(MICROMIPSOP_MASK_MT_U, MICROMIPSOP_SH_MT_U): Likewise.
(MICROMIPSOP_MASK_MT_H, MICROMIPSOP_SH_MT_H): Likewise.
(MICROMIPSOP_MASK_MTACC_T, MICROMIPSOP_SH_MTACC_T): Likewise.
(MICROMIPSOP_MASK_MTACC_D, MICROMIPSOP_SH_MTACC_D): Likewise.
(MICROMIPSOP_MASK_BBITIND, MICROMIPSOP_SH_BBITIND): Likewise.
(MICROMIPSOP_MASK_CINSPOS, MICROMIPSOP_SH_CINSPOS): Likewise.
(MICROMIPSOP_MASK_CINSLM1, MICROMIPSOP_SH_CINSLM1): Likewise.
(MICROMIPSOP_MASK_SEQI, MICROMIPSOP_SH_SEQI): Likewise.
(micromips_opcodes): New declaration.
(bfd_micromips_num_opcodes): Likewise.
ld/testsuite/
2011-02-25 Catherine Moore <clm@codesourcery.com>
Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* lib/ld-lib.exp (run_dump_test): Support distinct assembler
flags for the same source named multiple times.
* ld-mips-elf/jalx-1.s: New test source.
* ld-mips-elf/jalx-1.d: New test output.
* ld-mips-elf/jalx-1.ld: New test linker script.
* ld-mips-elf/jalx-2-main.s: New test source.
* ld-mips-elf/jalx-2-ex.s: Likewise.
* ld-mips-elf/jalx-2-printf.s: Likewise.
* ld-mips-elf/jalx-2.dd: New test output.
* ld-mips-elf/jalx-2.ld: New test linker script.
* ld-mips-elf/mips16-and-micromips.d: New test.
* ld-mips-elf/mips-elf.exp: Run the new tests
opcodes/
2011-02-25 Chao-ying Fu <fu@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* micromips-opc.c: New file.
* mips-dis.c (micromips_to_32_reg_b_map): New array.
(micromips_to_32_reg_c_map, micromips_to_32_reg_d_map): Likewise.
(micromips_to_32_reg_e_map, micromips_to_32_reg_f_map): Likewise.
(micromips_to_32_reg_g_map, micromips_to_32_reg_l_map): Likewise.
(micromips_to_32_reg_q_map): Likewise.
(micromips_imm_b_map, micromips_imm_c_map): Likewise.
(micromips_ase): New variable.
(is_micromips): New function.
(set_default_mips_dis_options): Handle microMIPS ASE.
(print_insn_micromips): New function.
(is_compressed_mode_p): Likewise.
(_print_insn_mips): Handle microMIPS instructions.
* Makefile.am (CFILES): Add micromips-opc.c.
* configure.in (bfd_mips_arch): Add micromips-opc.lo.
* Makefile.in: Regenerate.
* configure: Regenerate.
* mips-dis.c (micromips_to_32_reg_h_map): New variable.
(micromips_to_32_reg_i_map): Likewise.
(micromips_to_32_reg_m_map): Likewise.
(micromips_to_32_reg_n_map): New macro.
2011-07-24 14:20:15 +00:00
bcd530a713
include/opcode/
...
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips.h (INSN_TRAP): Rename to...
(INSN_NO_DELAY_SLOT): ... this.
(INSN_SYNC): Remove macro.
gas/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* config/tc-mips.c (can_swap_branch_p): Adjust for the rename of
INSN_TRAP to INSN_NO_DELAY_SLOT. Remove the check for INSN_SYNC
as well as explicit checks for ERET and DERET when scheduling
branch delay slots.
opcodes/
2011-07-24 Maciej W. Rozycki <macro@codesourcery.com>
* mips-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(DSP_VOLA): Likewise.
(mips_builtin_opcodes): Add NODS annotation to "deret" and
"eret". Replace INSN_SYNC with NODS throughout. Use NODS in
place of TRAP for "wait", "waiti" and "yield".
* mips16-opc.c (NODS): New macro.
(TRAP): Adjust for the rename of INSN_TRAP to INSN_NO_DELAY_SLOT.
(mips16_opcodes): Use NODS in place of TRAP for "jalrc", "jrc",
"restore" and "save".
2011-07-24 14:04:51 +00:00
7a9068fe16
Add initial Intel K1OM support.
...
bfd/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ALL_MACHINES): Add cpu-k1om.lo.
(ALL_MACHINES_CFILES): Add cpu-k1om.c.
* Makefile.in: Regenerated.
* archures.c (bfd_architecture): Add bfd_arch_k1om.
(bfd_k1om_arch): New.
(bfd_archures_list): Add &bfd_k1om_arch.
* bfd-in2.h: Regenerated.
* config.bfd (targ64_selvecs): Add bfd_elf64_k1om_vec if
bfd_elf64_x86_64_vec is supported. Add bfd_elf64_k1om_freebsd_vec
if bfd_elf64_x86_64_freebsd_vec is supported.
(targ_selvecs): Likewise.
* configure.in: Support bfd_elf64_k1om_vec and
bfd_elf64_k1om_freebsd_vec.
* configure: Regenerated.
* cpu-k1om.c: New.
* elf64-x86-64.c (elf64_k1om_elf_object_p): New.
(bfd_elf64_k1om_vec): Likewise.
(bfd_elf64_k1om_freebsd_vec): Likewise.
* targets.c (bfd_elf64_k1om_vec): New.
(bfd_elf64_k1om_freebsd_vec): Likewise.
(_bfd_target_vector): Add bfd_elf64_k1om_vec and
bfd_elf64_k1om_freebsd_vec.
binutils/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (init_dwarf_regnames): Handle EM_K1OM.
* elfedit.c (elf_machine): Support EM_K1OM.
(elf_class): Likewise.
* readelf.c (guess_is_rela): Handle EM_K1OM.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(get_section_type_name): Likewise.
(get_elf_section_flags): Likewise.
(process_section_headers): Likewise.
(get_symbol_index_type): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_32bit_pcrel_reloc): Likewise.
(is_64bit_abs_reloc): Likewise.
(is_64bit_pcrel_reloc): Likewise.
(is_none_reloc): Likewise.
* doc/binutils.texi: Mention K1OM for elfedit.
binutils/testsuite/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/elfedit.exp: Run elfedit-4.
* binutils-all/elfedit-4.d: New.
gas/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (cpu_arch): Add k1om.
(i386_align_code): Handle PROCESSOR_K1OM.
(check_cpu_arch_compatible): Check EM_K1OM.
(i386_arch): Handle Intel K1OM.
(i386_mach): Return bfd_mach_k1om for Intel K1OM.
(i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel
K1OM.
* config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New.
(processor_type): Add PROCESSOR_K1OM.
* doc/c-i386.texi: Document k1om.
gas/testsuite/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/k1om.d: New.
* gas/i386/k1om-inval.l: Likewise.
* gas/i386/k1om-inval.s: Likewise.
* gas/i386/i386.exp: Run k1om-inval and k1om.
include/elf/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* common.h (EM_K1OM): New.
ld/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (ALL_64_EMULATIONS): Add eelf_k1om.o and
eelf_k1om_fbsd.o
(eelf_k1om.c): New.
(eelf_k1om_fbsd.c): Likewise.
* Makefile.in: Regenerated.
* configure.tgt (targ64_extra_emuls): Add elf_k1om if elf_x86_64
is supported. Add elf_k1om_fbsd if elf_x86_64_fbsd is supported.
(targ_extra_emuls): Likewise.
* emulparams/elf_k1om.sh: New.
* emulparams/elf_k1om_fbsd.sh: Likewise.
ld/testsuite/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* ld-x86-64/abs-k1om.d: New.
* ld-x86-64/protected2-k1om.d: Likewise.
* ld-x86-64/protected3-k1om.d: Likewise.
* ld-x86-64/x86-64.exp: Run abs-k1om, protected2-k1om and
protected3-k1om.
opcodes/
2011-07-22 H.J. Lu <hongjiu.lu@intel.com>
* configure.in: Handle bfd_k1om_arch.
* configure: Regenerated.
* disassemble.c (disassembler): Handle bfd_k1om_arch.
* i386-dis.c (print_insn): Handle bfd_mach_k1om and
bfd_mach_k1om_intel_syntax.
* i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to
~(CpuL1OM|CpuK1OM). Add CPU_K1OM_FLAGS.
(cpu_flags): Add CpuK1OM.
* i386-opc.h (CpuK1OM): New.
(i386_cpu_flags): Add cpuk1om.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2011-07-22 20:22:38 +00:00
1b93226d63
* arm-dis.c (print_insn_arm): Revert previous, undocumented,
...
accidental change.
2011-07-12 08:45:45 +00:00
5d73b1f18f
PR binutils/12329
...
* avr-dis.c (avr_operand): Fix disassembly of ELPM, LPM and SPM
insns using post-increment addressing.
* avr.h (AVR_ISA_AVR6): Fix typo, adding AVR_ISA_SPMX.
2011-07-01 16:11:27 +00:00
182ae480cc
Update rorxS.
...
2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (vex_len_table): Update rorxS.
2011-07-01 01:34:35 +00:00
4cb0953da2
Fix rorx in BMI2.
...
gas/testsuite/
2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2011)
* gas/i386/bmi2.s: Correct rorx tests.
* gas/i386/x86-64-bmi2.s: Likewise.
* gas/i386/bmi2-intel.d: Updated.
* gas/i386/bmi2.d: Likewise.
* gas/i386/x86-64-bmi2-intel.d: Likewise.
* gas/i386/x86-64-bmi2.d: Likewise.
opcodes/
2011-06-30 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2011)
* i386-dis.c (vex_len_table): Correct rorxS.
* i386-opc.tbl: Correct rorx.
* i386-tbl.h: Regenerated.
2011-06-30 15:44:55 +00:00
906efcbc31
Replace "index" with "i".
...
2011-06-29 H.J. Lu <hongjiu.lu@intel.com>
* tilegx-opc.c (find_opcode): Replace "index" with "i".
* tilepro-opc.c (find_opcode): Likewise.
2011-06-29 20:46:11 +00:00
ceb94aa50d
gas/
...
* config/tc-mips.c (find_altered_mips16_opcode): New function.
(append_insn): Use it.
opcodes/
* mips16-opc.c (jalrc, jrc): Move earlier in file.
2011-06-29 20:42:48 +00:00
f7002f424a
Re-indent prefix_table.
...
2011-06-21 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (prefix_table): Re-indent PREFIX_VEX_0F388C and
PREFIX_VEX_0F388E.
2011-06-21 17:56:46 +00:00
563002680c
* Makefile.am (MAINTAINERCLEANFILES): Move s390-opc.tab ...
...
(MOSTLYCLEANFILES): ... here.
* Makefile.in: Regenerate.
2011-06-17 15:06:46 +00:00
bcf2cf9fc5
* Makefile.in: Regenerate.
2011-06-14 05:11:52 +00:00
aa137e4d51
* Makefile.am (ALL_MACHINES): Add cpu-tilegx.lo and cpu-tilepro.lo.
...
(ALL_MACHINE_CFILES): Add cpu-tilegx.c and cpu-tilepro.c.
(BFD32_BACKENDS): Add elf32-tilegx.lo, elf32-tilepro.lo,
and elfxx-tilegx.lo.
(BFD32_BACKENDS_CFILES): Add elf32-tilegx.c elf32-tilepro.c, and
elfxx-tilegx.c.
(BFD64_BACKENDS): Add elf64-tilegx.lo.
(BFD64_BACKENDS_CFILES): Add elf64-tilegx.c.
* Makefile.in: Regenerate.
* arctures.c (bfd_architecture): Define bfd_arch_tilepro,
bfd_arch_tilegx, bfd_mach_tilepro, bfd_mach_tilegx.
(bfd_arch_info): Add bfd_tilegx_arch, bfd_tilepro_arch.
(bfd_archures_list): Add bfd_tilegx_arch, bfd_tilepro_arch.
bfd-in2.h: Regenerate.
* config.bfd: Handle tilegx-*-* and tilepro-*-*.
* configure.in: Handle bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
and bfd_elf64_tilegx_vec.
* configure: Regenerate.
* elf-bfd.h (enum elf_target_id): Define TILEGX_ELF_DATA and
TILEPRO_ELF_DATA.
* libbfd.h: Regenerate.
* reloc.c: Add BFD_RELOC_TILEPRO_{COPY, GLOB_DAT, JMP_SLOT,
RELATIVE, BROFF_X1, JOFFLONG_X1, JOFFLONG_X1_PLT, IMM8_X0,
IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM15_X1, MF_IMM15_X1,
IMM16_X0, IMM16_X1, IMM16_X0_LO, IMM16_X1_LO, IMM16_X0_HI,
IMM16_X1_HI, IMM16_X0_HA, IMM16_X1_HA, IMM16_X0_PCREL,
IMM16_X1_PCREL, IMM16_X0_LO_PCREL, IMM16_X1_LO_PCREL,
IMM16_X0_HI_PCREL, IMM16_X1_HI_PCREL, IMM16_X0_HA_PCREL,
IMM16_X1_HA_PCREL, IMM16_X0_GOT, IMM16_X1_GOT, IMM16_X0_GOT_LO,
IMM16_X1_GOT_LO, IMM16_X0_GOT_HI, IMM16_X1_GOT_HI,
IMM16_X0_GOT_HA, IMM16_X1_GOT_HA, MMSTART_X0, MMEND_X0,
MMSTART_X1, MMEND_X1, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1,
IMM16_X0_TLS_GD, IMM16_X1_TLS_GD, IMM16_X0_TLS_GD_LO,
IMM16_X1_TLS_GD_LO, IMM16_X0_TLS_GD_HI, IMM16_X1_TLS_GD_HI,
IMM16_X0_TLS_GD_HA, IMM16_X1_TLS_GD_HA, IMM16_X0_TLS_IE,
IMM16_X1_TLS_IE, IMM16_X0_TLS_IE_LO, IMM16_X1_TLS_IE_LO,
IMM16_X0_TLS_IE_HI, IMM16_X1_TLS_IE_HI, IMM16_X0_TLS_IE_HA,
IMM16_X1_TLS_IE_HA, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
Add BFD_RELOC_TILEGX_{HW0, HW1, HW2, HW3, HW0_LAST, HW1_LAST,
HW2_LAST, COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1,
JUMPOFF_X1, JUMPOFF_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1,
DEST_IMM8_X1, MT_IMM14_X1, MF_IMM14_X1, MMSTART_X0, MMEND_X0,
SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_HW0,
IMM16_X1_HW0, IMM16_X0_HW1, IMM16_X1_HW1, IMM16_X0_HW2,
IMM16_X1_HW2, IMM16_X0_HW3, IMM16_X1_HW3, IMM16_X0_HW0_LAST,
IMM16_X1_HW0_LAST, IMM16_X0_HW1_LAST, IMM16_X1_HW1_LAST,
IMM16_X0_HW2_LAST, IMM16_X1_HW2_LAST, IMM16_X0_HW0_PCREL,
IMM16_X1_HW0_PCREL, IMM16_X0_HW1_PCREL, IMM16_X1_HW1_PCREL,
IMM16_X0_HW2_PCREL, IMM16_X1_HW2_PCREL, IMM16_X0_HW3_PCREL,
IMM16_X1_HW3_PCREL, IMM16_X0_HW0_LAST_PCREL,
IMM16_X1_HW0_LAST_PCREL, IMM16_X0_HW1_LAST_PCREL,
IMM16_X1_HW1_LAST_PCREL, IMM16_X0_HW2_LAST_PCREL,
IMM16_X1_HW2_LAST_PCREL, IMM16_X0_HW0_GOT, IMM16_X1_HW0_GOT,
IMM16_X0_HW1_GOT, IMM16_X1_HW1_GOT, IMM16_X0_HW2_GOT,
IMM16_X1_HW2_GOT, IMM16_X0_HW3_GOT, IMM16_X1_HW3_GOT,
IMM16_X0_HW0_LAST_GOT, IMM16_X1_HW0_LAST_GOT,
IMM16_X0_HW1_LAST_GOT, IMM16_X1_HW1_LAST_GOT,
IMM16_X0_HW2_LAST_GOT, IMM16_X1_HW2_LAST_GOT, IMM16_X0_HW0_TLS_GD,
IMM16_X1_HW0_TLS_GD, IMM16_X0_HW1_TLS_GD, IMM16_X1_HW1_TLS_GD,
IMM16_X0_HW2_TLS_GD, IMM16_X1_HW2_TLS_GD, IMM16_X0_HW3_TLS_GD,
IMM16_X1_HW3_TLS_GD, IMM16_X0_HW0_LAST_TLS_GD,
IMM16_X1_HW0_LAST_TLS_GD, IMM16_X0_HW1_LAST_TLS_GD,
IMM16_X1_HW1_LAST_TLS_GD, IMM16_X0_HW2_LAST_TLS_GD,
IMM16_X1_HW2_LAST_TLS_GD, IMM16_X0_HW0_TLS_IE,
IMM16_X1_HW0_TLS_IE, IMM16_X0_HW1_TLS_IE, IMM16_X1_HW1_TLS_IE,
IMM16_X0_HW2_TLS_IE, IMM16_X1_HW2_TLS_IE, IMM16_X0_HW3_TLS_IE,
IMM16_X1_HW3_TLS_IE, IMM16_X0_HW0_LAST_TLS_IE,
IMM16_X1_HW0_LAST_TLS_IE, IMM16_X0_HW1_LAST_TLS_IE,
IMM16_X1_HW1_LAST_TLS_IE, IMM16_X0_HW2_LAST_TLS_IE,
IMM16_X1_HW2_LAST_TLS_IE, TLS_DTPMOD64, TLS_DTPOFF64, TLS_TPOFF64,
TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
* targets.c (bfd_elf32_tilegx_vec): Declare.
(bfd_elf32_tilepro_vec): Declare.
(bfd_elf64_tilegx_vec): Declare.
(bfd_target_vector): Add bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
and bfd_elf64_tilegx_vec.
* cpu-tilegx.c: New file.
* cpu-tilepro.c: New file.
* elf32-tilepro.h: New file.
* elf32-tilepro.c: New file.
* elf32-tilegx.c: New file.
* elf32-tilegx.h: New file.
* elf64-tilegx.c: New file.
* elf64-tilegx.h: New file.
* elfxx-tilegx.c: New file.
* elfxx-tilegx.h: New file.
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
config/tc-tilepro.c.
(TARGET_CPU_HFILES): Add config/tc-tilegx.h and
config/tc-tilepro.h.
* Makefile.in: Regenerate.
* configure.tgt (tilepro-*-*): New.
(tilegx-*-*): Likewise.
* config/tc-tilegx.c: New file.
* config/tc-tilegx.h: Likewise.
* config/tc-tilepro.h: Likewise.
* config/tc-tilepro.c: Likewise.
* doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
c-tilepro.texi.
* doc/Makefile.in: Regenerate.
* doc/all.texi (TILEGX): Define.
(TILEPRO): Define.
* doc/as.texinfo: Add Tile-Gx and TILEPro documentation. Include
c-tilegx.texi and c-tilepro.texi.
* doc/c-tilegx.texi: New.
* doc/c-tilepro.texi: New.
* gas/tilepro/t_constants.s: New file.
* gas/tilepro/t_constants.d: Likewise.
* gas/tilepro/t_insns.s: Likewise.
* gas/tilepro/tilepro.exp: Likewise.
* gas/tilepro/t_insns.d: Likewise.
* gas/tilegx/tilegx.exp: Likewise.
* gas/tilegx/t_insns.d: Likewise.
* gas/tilegx/t_insns.s: Likewise.
* dis-asm.h (print_insn_tilegx): Declare.
(print_insn_tilepro): Likewise.
* tilegx.h: New file.
* tilepro.h: New file.
* common.h: Add EM_TILEGX.
* tilegx.h: New file.
* tilepro.h: New file.
* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx.c and
eelf32tilepro.c.
(ALL_64_EMULATION_SOURCES): Add eelf64tilegx.c.
(eelf32tilegx.c): New target.
(eelf32tilepro.c): Likewise.
(eelf64tilegx.c): Likewise.
* Makefile.in: Regenerate.
* configure.tgt: Handle tilegx-*-* and tilepro-*-*.
* emulparams/elf32tilegx.sh: New file.
* emulparams/elf64tilegx.sh: New file.
* emulparams/elf32tilepro.sh: New file.
* ld-elf/eh5.d: Don't run on tile*.
* ld-srec/srec.exp: xfail on tile*.
* ld-tilegx/external.s: New file.
* ld-tilegx/reloc.d: New file.
* ld-tilegx/reloc.s: New file.
* ld-tilegx/tilegx.exp: New file.
* ld-tilepro/external.s: New file.
* ld-tilepro/reloc.d: New file.
* ld-tilepro/reloc.s: New file.
* ld-tilepro/tilepro.exp: New file.
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
* Makefile.in: Regenerate.
* configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
* configure: Regenerate.
* disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
* po/POTFILES.in: Regenerate.
* tilegx-dis.c: New file.
* tilegx-opc.c: New file.
* tilepro-dis.c: New file.
* tilepro-opc.c: New file.
2011-06-13 15:18:54 +00:00
6c30d220f1
Support AVX Programming Reference (June, 2011).
...
gas/
2011-06-10 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2011)
* config/tc-i386.c (i386_error): Add invalid_vsib_address and
unsupported_vector_index_register.
(cpu_arch): Add .avx2, .bmi2, .lzcnt and .invpcid.
(check_VecOperands): New.
(match_template): Call check_VecOperands. Handle
invalid_vsib_address and unsupported_vector_index_register.
(build_modrm_byte): Support VecSIB. Check register-only source
operand when two source operands are swapped.
(i386_index_check): Allow Xmm/Ymm index registers.
* doc/c-i386.texi: Document avx2/.avx2, bmi2/.bmi2, lzcnt/.lzcnt
and invpcid./invpcid.
gas/testsuite/
2011-06-10 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2011)
* gas/i386/arch-10-1.l: Updated.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/arch-10.s: Add LZCNT to comments.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/arch-10-lzcnt.d: New.
* gas/i386/avx-gather-intel.d: Likewise.
* gas/i386/avx-gather.d: Likewise.
* gas/i386/avx-gather.s: Likewise.
* gas/i386/avx2-intel.d: Likewise.
* gas/i386/avx2.d: Likewise.
* gas/i386/avx2.s: Likewise
* gas/i386/avx256int-intel.d: Likewise.
* gas/i386/avx256int.d: Likewise.
* gas/i386/avx256int.s: Likewise.
* gas/i386/bmi2-intel.d: Likewise.
* gas/i386/bmi2.d: Likewise.
* gas/i386/bmi2.s: Likewise.
* gas/i386/inval-invpcid.l:Likewise.
* gas/i386/inval-invpcid.s: Likewise.
* gas/i386/invpcid-intel.d: Likewise.
* gas/i386/invpcid.d: Likewise.
* gas/i386/invpcid.s: Likewise.
* gas/i386/x86-64-arch-2-lzcnt.d: Likewise.
* gas/i386/x86-64-avx-gather-intel.d: Likewise.
* gas/i386/x86-64-avx-gather.d: Likewise.
* gas/i386/x86-64-avx-gather.s: Likewise.
* gas/i386/x86-64-avx2-intel.d: Likewise.
* gas/i386/x86-64-avx2.d: Likewise.
* gas/i386/x86-64-avx2.s: Likewise.
* gas/i386/x86-64-avx256int-intel.d: Likewise.
* gas/i386/x86-64-avx256int.d: Likewise.
* gas/i386/x86-64-avx256int.s: Likewise.
* gas/i386/x86-64-bmi2-intel.d: Likewise.
* gas/i386/x86-64-bmi2.d: Likewise.
* gas/i386/x86-64-bmi2.s: Likewise.
* gas/i386/x86-64-inval-invpcid.l: Likewise.
* gas/i386/x86-64-inval-invpcid.s: Likewise.
* gas/i386/x86-64-invpcid-intel.d: Likewise.
* gas/i386/x86-64-invpcid.d: Likewise.
* gas/i386/x86-64-invpcid.s: Likewise.
opcodes/
2011-06-10 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2011)
* i386-dis.c (XMGatherQ): New.
* i386-dis.c (EXxmm_mb): New.
(EXxmm_mb): Likewise.
(EXxmm_mw): Likewise.
(EXxmm_md): Likewise.
(EXxmm_mq): Likewise.
(EXxmmdw): Likewise.
(EXxmmqd): Likewise.
(VexGatherQ): Likewise.
(MVexVSIBDWpX): Likewise.
(MVexVSIBQWpX): Likewise.
(xmm_mb_mode): Likewise.
(xmm_mw_mode): Likewise.
(xmm_md_mode): Likewise.
(xmm_mq_mode): Likewise.
(xmmdw_mode): Likewise.
(xmmqd_mode): Likewise.
(ymmxmm_mode): Likewise.
(vex_vsib_d_w_dq_mode): Likewise.
(vex_vsib_q_w_dq_mode): Likewise.
(MOD_VEX_0F385A_PREFIX_2): Likewise.
(MOD_VEX_0F388C_PREFIX_2): Likewise.
(MOD_VEX_0F388E_PREFIX_2): Likewise.
(PREFIX_0F3882): Likewise.
(PREFIX_VEX_0F3816): Likewise.
(PREFIX_VEX_0F3836): Likewise.
(PREFIX_VEX_0F3845): Likewise.
(PREFIX_VEX_0F3846): Likewise.
(PREFIX_VEX_0F3847): Likewise.
(PREFIX_VEX_0F3858): Likewise.
(PREFIX_VEX_0F3859): Likewise.
(PREFIX_VEX_0F385A): Likewise.
(PREFIX_VEX_0F3878): Likewise.
(PREFIX_VEX_0F3879): Likewise.
(PREFIX_VEX_0F388C): Likewise.
(PREFIX_VEX_0F388E): Likewise.
(PREFIX_VEX_0F3890..PREFIX_VEX_0F3893): Likewise.
(PREFIX_VEX_0F38F5): Likewise.
(PREFIX_VEX_0F38F6): Likewise.
(PREFIX_VEX_0F3A00): Likewise.
(PREFIX_VEX_0F3A01): Likewise.
(PREFIX_VEX_0F3A02): Likewise.
(PREFIX_VEX_0F3A38): Likewise.
(PREFIX_VEX_0F3A39): Likewise.
(PREFIX_VEX_0F3A46): Likewise.
(PREFIX_VEX_0F3AF0): Likewise.
(VEX_LEN_0F3816_P_2): Likewise.
(VEX_LEN_0F3819_P_2): Likewise.
(VEX_LEN_0F3836_P_2): Likewise.
(VEX_LEN_0F385A_P_2_M_0): Likewise.
(VEX_LEN_0F38F5_P_0): Likewise.
(VEX_LEN_0F38F5_P_1): Likewise.
(VEX_LEN_0F38F5_P_3): Likewise.
(VEX_LEN_0F38F6_P_3): Likewise.
(VEX_LEN_0F38F7_P_1): Likewise.
(VEX_LEN_0F38F7_P_2): Likewise.
(VEX_LEN_0F38F7_P_3): Likewise.
(VEX_LEN_0F3A00_P_2): Likewise.
(VEX_LEN_0F3A01_P_2): Likewise.
(VEX_LEN_0F3A38_P_2): Likewise.
(VEX_LEN_0F3A39_P_2): Likewise.
(VEX_LEN_0F3A46_P_2): Likewise.
(VEX_LEN_0F3AF0_P_3): Likewise.
(VEX_W_0F3816_P_2): Likewise.
(VEX_W_0F3818_P_2): Likewise.
(VEX_W_0F3819_P_2): Likewise.
(VEX_W_0F3836_P_2): Likewise.
(VEX_W_0F3846_P_2): Likewise.
(VEX_W_0F3858_P_2): Likewise.
(VEX_W_0F3859_P_2): Likewise.
(VEX_W_0F385A_P_2_M_0): Likewise.
(VEX_W_0F3878_P_2): Likewise.
(VEX_W_0F3879_P_2): Likewise.
(VEX_W_0F3A00_P_2): Likewise.
(VEX_W_0F3A01_P_2): Likewise.
(VEX_W_0F3A02_P_2): Likewise.
(VEX_W_0F3A38_P_2): Likewise.
(VEX_W_0F3A39_P_2): Likewise.
(VEX_W_0F3A46_P_2): Likewise.
(MOD_VEX_0F3818_PREFIX_2): Removed.
(MOD_VEX_0F3819_PREFIX_2): Likewise.
(VEX_LEN_0F60_P_2..VEX_LEN_0F6D_P_2): Likewise.
(VEX_LEN_0F70_P_1..VEX_LEN_0F76_P_2): Likewise.
(VEX_LEN_0FD1_P_2..VEX_LEN_0FD5_P_2): Likewise.
(VEX_LEN_0FD7_P_2_M_1..VEX_LEN_0F3819_P_2_M_0): Likewise.
(VEX_LEN_0F381C_P_2..VEX_LEN_0F3840_P_2): Likewise.
(VEX_LEN_0F3A0E_P_2): Likewise.
(VEX_LEN_0F3A0F_P_2): Likewise.
(VEX_LEN_0F3A42_P_2): Likewise.
(VEX_LEN_0F3A4C_P_2): Likewise.
(VEX_W_0F3818_P_2_M_0): Likewise.
(VEX_W_0F3819_P_2_M_0): Likewise.
(prefix_table): Updated.
(three_byte_table): Likewise.
(vex_table): Likewise.
(vex_len_table): Likewise.
(vex_w_table): Likewise.
(mod_table): Likewise.
(putop): Handle "LW".
(intel_operand_size): Handle xmm_mb_mode, xmm_mw_mode,
xmm_md_mode, xmm_mq_mode, xmmdw_mode, xmmqd_mode, ymmxmm_mode,
vex_vsib_d_w_dq_mode, vex_vsib_q_w_dq_mode.
(OP_EX): Likewise.
(OP_E_memory): Handle vex_vsib_d_w_dq_mode and
vex_vsib_q_w_dq_mode.
(OP_XMM): Handle vex_vsib_q_w_dq_mode.
(OP_VEX): Likewise.
* i386-gen.c (cpu_flag_init): Add CpuAVX2 to CPU_ANY_SSE_FLAGS
and CPU_ANY_AVX_FLAGS. Add CPU_BMI2_FLAGS, CPU_LZCNT_FLAGS,
CPU_INVPCID_FLAGS and CPU_AVX2_FLAGS.
(cpu_flags): Add CpuAVX2, CpuBMI2, CpuLZCNT and CpuINVPCID.
(opcode_modifiers): Add VecSIB.
* i386-opc.h (CpuAVX2): New.
(CpuBMI2): Likewise.
(CpuLZCNT): Likewise.
(CpuINVPCID): Likewise.
(VecSIB128): Likewise.
(VecSIB256): Likewise.
(VecSIB): Likewise.
(i386_cpu_flags): Add cpuavx2, cpubmi2, cpulzcnt and cpuinvpcid.
(i386_opcode_modifier): Add vecsib.
* i386-opc.tbl: Add invpcid, AVX2 and BMI2 instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2011-06-10 21:27:40 +00:00
d535accd98
Add CpuF16C to CPU_BDVER2_FLAGS.
...
opcodes/
2011-06-02 Quentin Neill <quentin.neill@amd.com>
* i386-gen.c (cpu_flag_init): Add CpuF16C to CPU_BDVER2_FLAGS.
* i386-init.h: Regenerated.
2011-06-03 20:06:20 +00:00
f8b960bc80
PR binutils/12752
...
* arm-dis.c (print_insn_coprocessor): Use bfd_vma type for
computing address offsets.
(print_arm_address): Likewise.
(print_insn_arm): Likewise.
(print_insn_thumb16): Likewise.
(print_insn_thumb32): Likewise.
2011-06-03 10:04:03 +00:00
26d97720ed
gas/
...
* config/tc-arm.c (parse_address_main): Handle -0 offsets.
(encode_arm_addr_mode_2): Set default sign of zero here ...
(encode_arm_addr_mode_3): ... and here.
(encode_arm_cp_address): ... and here.
(md_apply_fix): Use default sign of zero here.
gas/testsuite/
* gas/arm/inst.d: Adjust for signed zero offsets.
* gas/arm/ldst-offset0.d: New test.
* gas/arm/ldst-offset0.s: New test.
* gas/arm/offset-1.d: New test.
* gas/arm/offset-1.s: New test.
ld/testsuite/
Adjust tests for zero offset formatting.
* ld-arm/cortex-a8-fix-bcc-plt.d: Adjust.
* ld-arm/farcall-arm-arm-pic-veneer.d: Adjust.
* ld-arm/farcall-arm-thumb.d: Adjust.
* ld-arm/farcall-group-size2.d: Adjust.
* ld-arm/farcall-group.d: Adjust.
* ld-arm/farcall-mix.d: Adjust.
* ld-arm/farcall-mix2.d: Adjust.
* ld-arm/farcall-mixed-lib-v4t.d: Adjust.
* ld-arm/farcall-mixed-lib.d: Adjust.
* ld-arm/farcall-thumb-arm-blx-pic-veneer.d: Adjust.
* ld-arm/farcall-thumb-arm-pic-veneer.d: Adjust.
* ld-arm/farcall-thumb-thumb.d: Adjust.
* ld-arm/ifunc-10.dd: Adjust.
* ld-arm/ifunc-3.dd: Adjust.
* ld-arm/ifunc-4.dd: Adjust.
* ld-arm/ifunc-5.dd: Adjust.
* ld-arm/ifunc-6.dd: Adjust.
* ld-arm/ifunc-7.dd: Adjust.
* ld-arm/ifunc-8.dd: Adjust.
* ld-arm/jump-reloc-veneers-long.d: Adjust.
* ld-arm/tls-longplt-lib.d: Adjust.
* ld-arm/tls-thumb1.d: Adjust.
opcodes/
* arm-dis.c (print_insn_coprocessor): Explicitly print #-0
as address offset.
(print_arm_address): Likewise. Elide positive #0 appropriately.
(print_insn_arm): Likewise.
2011-06-02 15:32:10 +00:00
cc643b88f1
Fix spelling mistakes.
2011-06-02 13:43:24 +00:00
c8fa16ed5a
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/tc-s390.c (md_gather_operands): Fix check for floating
register pair operands.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h: Replace S390_OPERAND_REG_EVEN with
S390_OPERAND_REG_PAIR.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c: Replace S390_OPERAND_REG_EVEN with
S390_OPERAND_REG_PAIR. Fix INSTR_RRF_0UFEF instruction type.
* s390-opc.txt: Fix cxr instruction type.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/esa-g5.d: Fix fp register pair operands.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/zarch-z196.d: Likewise.
* gas/s390/zarch-z196.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z9-ec.d: Likewise.
* gas/s390/zarch-z9-ec.s: Likewise.
2011-05-24 16:13:31 +00:00
5e4b319cdc
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/tc-s390.c (md_gather_operands): Emit an error for odd
numbered registers used as register pair operand.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h: Add S390_OPCODE_REG_EVEN flag.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c: Add new instruction types marking register pair
operands.
* s390-opc.txt: Match instructions having register pair operands
to the new instruction types.
2011-05-24 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/esa-g5.d: Fix register pair operands.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z196.d: Likewise.
* gas/s390/zarch-z196.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z900.d: Likewise.
* gas/s390/zarch-z900.s: Likewise.
* gas/s390/zarch-z990.d: Likewise.
* gas/s390/zarch-z990.s: Likewise.
2011-05-24 13:33:57 +00:00
fda544a25c
* v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
...
operands.
2011-05-19 11:10:59 +00:00
4cab4add34
2011-05-10 Quentin Neill <quentin.neill@amd.com>
...
gas/
* config/tc-i386.c (cpu_arch): Add bdver2 and rename
PROCESSOR_BDVER1 to PROCESSOR_BDVER.
(i386_align_code): Rename PROCESSOR_BDVER1.
(processor_type): Ditto.
* doc/c-i386.texi: Add bdver2.
opcodes/
* i386-gen.c (cpu_flag_init): Add new CPU_BDVER2_FLAGS.
* i386-init.h: Regenerated.
gas/testsuite/
* gas/i386/i386.exp: Add new bdver2 test cases.
* gas/i386/nops-1-bdver2.d: New.
* gas/i386/x86-64-nops-1-bdver2.d: New.
2011-05-11 22:35:20 +00:00
b4e7b88557
Updated Danish, Esperanto and French translations.
2011-04-27 10:02:27 +00:00
2f7f771012
* ppc-opc.c: (powerpc_opcodes): Enable icswx for POWER7.
2011-04-25 23:11:21 +00:00
9887672fa6
* rx-decode.opc (rx_decode_opcode): Set the syntax for multi-byte NOPs.
...
* rx-decode.c: Regenerate.
2011-04-21 05:48:06 +00:00
3251b3756a
Regenerate i386-init.h.
...
2011-04-20 H.J. Lu <hongjiu.lu@intel.com>
* i386-init.h: Regenerated.
2011-04-20 14:27:34 +00:00
b13a3ca683
* i386-gen.c (cpu_flag_init): Remove 3dnow and 3dnowa bits
...
from bdver1 flags.
2011-04-19 23:45:17 +00:00
00bbc0bdc6
* config/tc-arm.c (v7m_psrs): Revert previous delta.
...
* gas/arm/mrs-msr-thumb-v7e-m.s: Restore name of basepri_max
register.
* gas/arm/mrs-msr-thumb-v7e-m.d: Likewise.
* gas/arm/arch7.d: Likewise.
* gas/arm/arch7.s: Likewise.
* arm-dis.c: Revert previous reversion.
2011-04-19 07:44:12 +00:00
ac7f631be1
* gas/arm/arch7.s: Fix typo basepri_max should be basepri_mask.
...
* gas/arm/mrs-msr-thumb-v7e-m.s: Likewise.
* gas/arm/arch7.d: Update expected disassembly.
* gas/arm/attr-march-armv7.d: Remove Microcontroller tag.
* gas/arm/blx-bad.d: Only run for ELF based targets.
* gas/arm/mrs-msr-thumb-v6t2.d: Likewise.
* gas/arm/vldm-arm.d: Likewise.
* gas/arm/mrs-msr-thumb-v7-m.d: Likewise.
Remove qualifiers from PSR and IAPSR regsiter names.
* gas/arm/mrs-msr-thumb-v7e-m.d: Likewise.
* gas/arm/thumb2_bcond.d: Update expected disassembly to allow for
relaxing of branch insns.
* gas/arm/thumb32.d: Fix whitespace problems in disassembly.
* config/tc-arm.c (parse_psr): Use selected_cpu not cpu_variant to
detect M-profile targets.
(do_t_swi): Exclude v7 and higher variants from arm_ext_os test.
(v7m_psrs): Fix typo: basepri_max should be basepri_mask.
* arm-dis.c (psr_name): Revert previous delta.
* arm.h (ARM_AEXT_V7_ARM): Remove ARM_EXT_OS from bitmask.
2011-04-19 07:27:32 +00:00
7d063384af
* v850-dis.c (disassemble): Always print a closing square brace if
...
an opening square brace was printed.
2011-04-13 13:20:24 +00:00
32a946987b
PR binutils/12534
...
* arm-dis.c (thumb32_opcodes): Add %L suffix to LDRD and STRD insn
patterns.
(print_insn_thumb32): Handle %L.
* gas/arm/thumb32.s: Add PC relative LDRD and STRD insns.
* gas/arm/thumb32.l: Update expected output.
* gas/arm/thumb32.d: Update expected disassembly.
2011-04-12 16:01:48 +00:00
d2cd120565
gas/
...
* config/tc-arm.c (parse_psr): Add LHS argument. Improve support
for *APSR bitmasks.
(operand_parse_code): Replace OP_PSR with OP_wPSR and OP_rPSR.
Remove OP_RVC_PSR.
(parse_operands): Likewise.
(do_mrs): Tweak error message for constraint.
(do_t_mrs): Update constraints for changes to APSR support.
(do_t_msr): Likewise. Don't set PSR_f flag here.
(psrs): Remove "g", "nzcvq", "nzcvqg".
(insns): Tweak entries for msr and mrs instructions.
opcodes/
* arm-dis.c (psr_name): Fix typo for BASEPRI_MAX.
(print_insn_thumb32): Add APSR bitmask support.
gas/testsuite/
* gas/arm/mrs-msr-thumb-v7-m.s: New.
* gas/arm/mrs-msr-thumb-v7-m.d: New.
* gas/arm/mrs-msr-thumb-v7-m-bad.d: New.
* gas/arm/mrs-msr-thumb-v7-m-bad.l: New.
* gas/arm/mrs-msr-thumb-v7-m-bad.s: New.
* gas/arm/mrs-msr-thumb-v7e-m.d: New.
* gas/arm/mrs-msr-thumb-v7e-m.s: New.
* gas/arm/mrs-msr-arm-v7-a-bad.d: New.
* gas/arm/mrs-msr-arm-v7-a-bad.l: New.
* gas/arm/mrs-msr-arm-v7-a-bad.s: New.
* gas/arm/mrs-msr-arm-v7-a.d: New.
* gas/arm/mrs-msr-arm-v7-a.s: New.
* gas/arm/mrs-msr-arm-v6.d: New.
* gas/arm/mrs-msr-arm-v6.s: New.
* gas/arm/mrs-msr-thumb-v6t2.d: New.
* gas/arm/mrs-msr-thumb-v6t2.s: New.
* gas/arm/arch7.d: Fix typo in disassembly for BASEPRI_MAX,
bitmasks for IAPSR etc.
* gas/arm/arch7.s: Specify bitmask for APSR writes.
* gas/arm/archv6m.s: Likewise.
* msr-imm-bad.l: Tweak expected disassembly in error message.
* msr-reg-bad.l: Likewise.
* msr-imm.d: Tweak expected disassembly.
* msr-reg.d: Likewise.
* msr-reg-thumb.d: Likewise.
* msr-imm.s: Specify bitmask on APSR writes.
* msr-reg.s: Add comment about deprecated usage.
2011-04-11 18:49:06 +00:00
1fbaefec00
2011-04-07 Paul Carroll<pcarroll@codesourcery.com>
...
opcodes/
* arm-dis.c (print_insn): init vars moved into private_data structure.
binutils/testsuite/
* binutils-all/arm/simple.s: Demo issue with objdump with
multiple input files
* binutils-all/arm/objdump.exp: added new ARM test case code
2011-04-08 11:42:19 +00:00
67171547aa
opcodes: blackfin: ignore (M) on MAC0-only dsp mac funcs
...
If the MAC1 part of the insn is disabled, then the (M) flag is ignored.
Rather than include it in the decode, move the MM clearing to the MAC0
portion of the code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-24 05:27:39 +00:00
8cc66334fa
/bfd:
...
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* archures.c: Add AVR XMEGA architecture information.
* cpu-avr.c (arch_info_struct): Likewise.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Likewise.
(elf32_avr_object_p): Likewise.
/gas:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (struct avr_opcodes_s): Add opcode field.
(AVR_INSN): Change definition to match.
(avr_opcodes): Likewise, change to match.
(mcu_types): Add XMEGA architecture names and new XMEGA device names.
(md_show_usage): Add XMEGA architecture names.
(avr_operand): Add 'E' constraint for DES instruction of XMEGA devices.
Add support for SPM Z+ instruction.
* doc/c-avr.texi: Add documentation for XMEGA architectures and
devices.
/include/opcode:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr.h (AVR_ISA_SPMX,AVR_ISA_DES,AVR_ISA_M256,AVR_ISA_XMEGA):
New instruction set flags.
(AVR_INSN): Add new instructions for SPM Z+, DES for XMEGA.
/ld:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* Makefile.am (ALL_EMULATION_SOURCES): Add AVR XMEGA architectures.
(eavrxmega?.c): Likewise.
* configure.tgt (targ_extra_emuls): Likewise.
* emulparams/avrxmega1.sh: New file.
* emulparams/avrxmega2.sh: Likewise.
* emulparams/avrxmega3.sh: Likewise.
* emulparams/avrxmega4.sh: Likewise.
* emulparams/avrxmega5.sh: Likewise.
* emulparams/avrxmega6.sh: Likewise.
* emulparams/avrxmega7.sh: Likewise.
* emultempl/avrelf.em (avr_elf_${EMULATION_NAME}_before_allocation):
Add avrxmega6, avrxmega7 to list of architectures for no stubs.
/opcodes:
2011-03-22 Eric B. Weddington <eric.weddington@atmel.com>
* avr-dis.c (avr_operand): Add opcode_str parameter. Check for
post-increment to support LPM Z+ instruction. Add support for 'E'
constraint for DES instruction.
(print_insn_avr): Adjust calls to avr_operand. Rename variable.
2011-03-22 18:10:48 +00:00
34e77a920a
include/elf/
...
* arm.h (R_ARM_IRELATIVE): New relocation.
bfd/
* reloc.c (BFD_RELOC_ARM_IRELATIVE): New relocation.
* bfd-in2.h: Regenerate.
* elf32-arm.c (elf32_arm_howto_table_2): Rename existing definition
to elf32_arm_howto_table_3 and replace with a single R_ARM_IRELATIVE
entry.
(elf32_arm_howto_from_type): Update accordingly.
(elf32_arm_reloc_map): Map BFD_RELOC_ARM_IRELATIVE to R_ARM_IRELATIVE.
(elf32_arm_reloc_name_lookup): Handle elf32_arm_howto_table_3.
(arm_plt_info): New structure, split out from elf32_arm_link_hash_entry
with an extra noncall_refcount field.
(arm_local_iplt_info): New structure.
(elf_arm_obj_tdata): Add local_iplt.
(elf32_arm_local_iplt): New accessor macro.
(elf32_arm_link_hash_entry): Replace plt_thumb_refcount,
plt_maybe_thumb_refcount and plt_got_offset with an arm_plt_info.
Change tls_type to a bitfield and add is_iplt.
(elf32_arm_link_hash_newfunc): Update accordingly.
(elf32_arm_allocate_local_sym_info): New function.
(elf32_arm_create_local_iplt): Likewise.
(elf32_arm_get_plt_info): Likewise.
(elf32_arm_plt_needs_thumb_stub_p): Likewise.
(elf32_arm_get_local_dynreloc_list): Likewise.
(create_ifunc_sections): Likewise.
(elf32_arm_copy_indirect_symbol): Update after the changes to
elf32_arm_link_hash_entry. Assert the is_iplt has not yet been set.
(arm_type_of_stub): Add an st_type argument. Use elf32_arm_get_plt_info
to get PLT information. Assert that all STT_GNU_IFUNC references
are turned into PLT references.
(arm_build_one_stub): Pass the symbol type to
elf32_arm_final_link_relocate.
(elf32_arm_size_stubs): Pass the symbol type to arm_type_of_stub.
(elf32_arm_allocate_irelocs): New function.
(elf32_arm_add_dynreloc): In static objects, use .rel.iplt for
all R_ARM_IRELATIVE.
(elf32_arm_allocate_plt_entry): New function.
(elf32_arm_populate_plt_entry): Likewise.
(elf32_arm_final_link_relocate): Add an st_type parameter.
Set srelgot to null for static objects. Use separate variables
to record which st_value and st_type should be used when generating
a dynamic relocation. Use elf32_arm_get_plt_info to find the
symbol's PLT information, setting has_iplt_entry, splt,
plt_offset and gotplt_offset accordingly. Check whether
STT_GNU_IFUNC symbols should resolve to an .iplt entry, and change
the relocation target accordingly. Broaden assert to include
.iplts. Don't set sreloc for static relocations. Assert that
we only generate dynamic R_ARM_RELATIVE relocations for R_ARM_ABS32
and R_ARM_ABS32_NOI. Generate R_ARM_IRELATIVE relocations instead
of R_ARM_RELATIVE relocations if the target is an STT_GNU_IFUNC
symbol. Pass the symbol type to arm_type_of_stub. Conditionally
resolve GOT references to the .igot.plt entry.
(elf32_arm_relocate_section): Update the call to
elf32_arm_final_link_relocate.
(elf32_arm_gc_sweep_hook): Use elf32_arm_get_plt_info to get PLT
information. Treat R_ARM_REL32 and R_ARM_REL32_NOI as call
relocations in shared libraries and relocatable executables.
Count non-call PLT references. Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_check_relocs): Always create ifunc sections. Set isym
at the same time as setting h. Use elf32_arm_allocate_local_sym_info
to allocate local symbol information. Treat R_ARM_REL32 and
R_ARM_REL32_NOI as call relocations in shared libraries and
relocatable executables. Record PLT information for local
STT_GNU_IFUNC functions as well as global functions. Count
non-call PLT references. Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_adjust_dynamic_symbol): Handle STT_GNU_IFUNC symbols.
Don't remove STT_GNU_IFUNC PLTs unless all references have been
removed. Update after the changes to elf32_arm_link_hash_entry.
(allocate_dynrelocs_for_symbol): Decide whether STT_GNU_IFUNC PLT
entries should live in .plt or .iplt. Check whether the .igot.plt
and .got entries can be combined. Use elf32_arm_allocate_plt_entry
to allocate .plt and .(i)got.plt entries. Detect which .got
entries will need R_ARM_IRELATIVE relocations and use
elf32_arm_allocate_irelocs to allocate them. Likewise other
non-.got dynamic relocations.
(elf32_arm_size_dynamic_sections): Allocate .iplt, .igot.plt
and dynamic relocations for local STT_GNU_IFUNC symbols.
Check whether the .igot.plt and .got entries can be combined.
Detect which .got entries will need R_ARM_IRELATIVE relocations
and use elf32_arm_allocate_irelocs to allocate them. Use stashed
section pointers intead of strcmp checks. Handle iplt and igotplt.
(elf32_arm_finish_dynamic_symbol): Use elf32_arm_populate_plt_entry
to fill in .plt, .got.plt and .rel(a).plt entries. Point
STT_GNU_IFUNC symbols at an .iplt entry if non-call relocations
resolve to it.
(elf32_arm_output_plt_map_1): New function, split out from
elf32_arm_output_plt_map. Handle .iplt entries. Use
elf32_arm_plt_needs_thumb_stub_p.
(elf32_arm_output_plt_map): Call it.
(elf32_arm_output_arch_local_syms): Add mapping symbols for
local .iplt entries.
(elf32_arm_swap_symbol_in): Handle Thumb STT_GNU_IFUNC symbols.
(elf32_arm_swap_symbol_out): Likewise.
(elf32_arm_add_symbol_hook): New function.
(elf_backend_add_symbol_hook): Define for all targets.
opcodes/
* arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.
gas/
* config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
determine whether a relocation is needed.
(md_apply_fix, arm_apply_sym_value): Likewise.
ld/testsuite/
* ld-arm/ifunc-1.s, ld-arm/ifunc-1.dd, ld-arm/ifunc-1.gd,
ld-arm/ifunc-1.rd, ld-arm/ifunc-2.s, ld-arm/ifunc-2.dd,
ld-arm/ifunc-2.gd, ld-arm/ifunc-2.rd, ld-arm/ifunc-3.s,
ld-arm/ifunc-3.dd, ld-arm/ifunc-3.gd, ld-arm/ifunc-3.rd,
ld-arm/ifunc-4.s, ld-arm/ifunc-4.dd, ld-arm/ifunc-4.gd,
ld-arm/ifunc-4.rd, ld-arm/ifunc-5.s, ld-arm/ifunc-5.dd,
ld-arm/ifunc-5.gd, ld-arm/ifunc-5.rd, ld-arm/ifunc-6.s,
ld-arm/ifunc-6.dd, ld-arm/ifunc-6.gd, ld-arm/ifunc-6.rd,
ld-arm/ifunc-7.s, ld-arm/ifunc-7.dd, ld-arm/ifunc-7.gd,
ld-arm/ifunc-7.rd, ld-arm/ifunc-8.s, ld-arm/ifunc-8.dd,
ld-arm/ifunc-8.gd, ld-arm/ifunc-8.rd, ld-arm/ifunc-9.s,
ld-arm/ifunc-9.dd, ld-arm/ifunc-9.gd, ld-arm/ifunc-9.rd,
ld-arm/ifunc-10.s, ld-arm/ifunc-10.dd, ld-arm/ifunc-10.gd,
ld-arm/ifunc-10.rd, ld-arm/ifunc-11.s, ld-arm/ifunc-11.dd,
ld-arm/ifunc-11.gd, ld-arm/ifunc-11.rd, ld-arm/ifunc-12.s,
ld-arm/ifunc-12.dd, ld-arm/ifunc-12.gd, ld-arm/ifunc-12.rd,
ld-arm/ifunc-13.s, ld-arm/ifunc-13.dd, ld-arm/ifunc-13.gd,
ld-arm/ifunc-13.rd, ld-arm/ifunc-14.s, ld-arm/ifunc-14.dd,
ld-arm/ifunc-14.gd, ld-arm/ifunc-14.rd, ld-arm/ifunc-15.s,
ld-arm/ifunc-15.dd, ld-arm/ifunc-15.gd, ld-arm/ifunc-15.rd,
ld-arm/ifunc-16.s, ld-arm/ifunc-16.dd, ld-arm/ifunc-16.gd,
ld-arm/ifunc-16.rd, ld-arm/ifunc-dynamic.ld,
ld-arm/ifunc-static.ld: New tests.
* ld-arm/farcall-group.d, ld-arm/farcall-group-size2.d,
ld-arm/farcall-mixed-lib-v4t.d, ld-arm/farcall-mixed-lib.d: Update
for new stub hashes.
* ld-arm/arm-elf.exp: Run them.
2011-03-14 16:04:16 +00:00
35fc36a8d6
include/elf/
...
* internal.h (elf_internal_sym): Add st_target_internal.
* arm.h (arm_st_branch_type): New enum.
(ARM_SYM_BRANCH_TYPE): New macro.
bfd/
* elf-bfd.h (elf_link_hash_entry): Add target_internal.
* elf.c (swap_out_syms): Set st_target_internal for each
Elf_Internal_Sym.
* elfcode.h (elf_swap_symbol_in): Likewise.
* elf32-i370.c (i370_elf_finish_dynamic_sections): Likewise.
* elf32-sh-symbian.c (sh_symbian_relocate_section): Likewise.
* elf64-sparc.c (elf64_sparc_output_arch_syms): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Likewise.
* elflink.c (elf_link_output_extsym): Likewise.
(bfd_elf_final_link): Likewise.
(elf_link_add_object_symbols): Copy st_target_internal
to the hash table if we see a definition.
(_bfd_elf_copy_link_hash_symbol_type): Copy target_internal.
* elf32-arm.c (elf32_arm_stub_hash_entry): Replace st_type with
a branch_type field.
(a8_erratum_fix, a8_erratum_reloc): Likewise.
(arm_type_of_stub): Replace actual_st_type with an
actual_branch_type parameter.
(arm_build_one_stub): Use branch types rather than st_types to
determine the type of branch.
(cortex_a8_erratum_scan): Likewise.
(elf32_arm_size_stubs): Likewise.
(bfd_elf32_arm_process_before_allocation): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_sections): Likewise.
(elf32_arm_final_link_relocate): Replace sym_flags parameter with
a branch_type parameter.
(elf32_arm_relocate_section): Update call accordingly.
(elf32_arm_adjust_dynamic_symbol): Don't check STT_ARM_TFUNC.
(elf32_arm_output_map_sym): Initialize st_target_internal.
(elf32_arm_output_stub_sym): Likewise.
(elf32_arm_symbol_processing): Delete.
(elf32_arm_swap_symbol_in): Convert STT_ARM_TFUNCs into STT_FUNCs.
Use st_target_internal to record the branch type.
(elf32_arm_swap_symbol_out): Use st_target_internal to test for
Thumb functions.
(elf32_arm_is_function_type): Delete.
(elf_backend_symbol_processing): Likewise.
(elf_backend_is_function_type): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Set the branch type
for Thumb symbols.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Check
eh->target_internal.
opcodes/
* arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
Use branch types instead.
(print_insn): Likewise.
2011-03-14 15:55:04 +00:00
0067d8fc73
opcodes/
...
* mips-opc.c (mips_builtin_opcodes): Correct register use
annotation of "alnv.ps".
gas/testsuite/
* gas/mips/alnv_ps-swap.d: New test for ALNV.PS instruction
branch swapping.
* gas/mips/alnv_ps-swap.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
2011-02-28 16:34:39 +00:00
3eebd5eb03
gas/
...
* config/tc-mips.c (macro): Handle M_PREF_AB.
include/opcode/
* mips.h (M_PREF_AB): New enum value.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add "pref" macro.
2011-02-28 16:06:51 +00:00
89c0d58cff
Swap ChangeLog entries.
2011-02-28 16:03:38 +00:00
500cccad3b
opcodes: blackfin: drop null/nul checks in OUTS
...
Parts of the disassembler rely on the disasm info never being NULL (such
as being able to read memory to disassemble in the first place). So drop
useless null checks in the OUTS helper.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-22 20:52:31 +00:00
f5caf9f434
opcodes: blackfin: use OUTS helper
...
We have an OUTS helper to handle outf fprintf_func logic, so conver the
few places not using it over.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-22 20:51:42 +00:00
e5bc42655d
opcodes: blackfin: clean up saved_state
...
Mark the state static, punt unused members, unify indexable register
lookups, and abort when there is a register lookup failure. Otherwise
we return NULL and the calling code assumes a valid pointer is returned.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-20 01:26:14 +00:00
602427c4af
opcodes: blackfin: fix style
...
Non-functional thrashing to the GNU style.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14 17:12:05 +00:00
298c1ec2a0
opcodes: blackfin: catch invalid loopsetup insns
...
The LoopSetup insn is only valid when the reg field is 0-7, so
don't go decoding it incorrectly when reg is 8-15.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14 05:21:04 +00:00
822ce8ee21
Remove freebsd1 from libtool.m4 macros and config.rpath.
...
/:
Import from Libtool and gnulib:
2011-01-27 Gerald Pfeifer <gerald@pfeifer.com>
Prepare for supporting FreeBSD 10.
* config.rpath: Remove handling of freebsd1* which soon would
match FreeBSD 10.0.
2011-01-20 Gerald Pfeifer <gerald@pfeifer.com> (tiny change)
Remove support for FreeBSD 1.x.
* libtool.m4 (_LT_LINKER_SHLIBS)
(_LT_SYS_DYNAMIC_LINKER): Remove handling of freebsd1* which
soon would incorrectly match FreeBSD 10.0.
bfd/:
* configure: Regenerate.
gas/:
* configure: Regenerate.
ld/:
* configure: Regenerate.
opcodes/:
* configure: Regenerate.
binutils/:
* configure: Regenerate.
gprof/:
* configure: Regenerate.
2011-02-13 21:00:14 +00:00
13c02f06ff
opcodes: blackfin: fix decoding of ABS
...
The single cycle dual mac ABS insn was incorrectly decoding the mac1
part of the insn.
Once we fix the decode, update the gas tests to have the correct output.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-13 18:55:22 +00:00
4db6639409
opcodes: blackfin: fix decoding of dsp mult insns
...
When assigning to a register half, the mac0 part of the mult insn
was not decoding properly. It would always show a full dreg instead
of the dreg low half.
Once we fix the disassembler, we have to update a few of the gas
tests as their previous expected output was incorrect.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-13 18:54:49 +00:00
36f446111a
gas/opcodes: blackfin: punt BYTEOP2M insn support
...
The BYTEOP2M insn was part of the initial Blackfin designs, but never made
it into any actual silicon. So punt support for it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-13 18:53:16 +00:00
9805c0a5b6
opcodes: blackfin: add missing space after PRNT insn
...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-12 19:38:11 +00:00
43a6aa65fe
opcodes: blackfin: drop "GP" register
...
There never was a "GP" register, so punt it from the decode map. It's
a hold over from a very old processor definition and never made it into
actual silicon.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-12 19:37:32 +00:00
26bb3ddd50
gas/opcodes: blackfin: move dsp mac func defines to common header
...
The mmod field is decoded in a few places (gas/opcodes/sim), so move it to
a common place to avoid duplication.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-12 19:36:31 +00:00
69b8ea4abd
opcodes: blackfin: constify register names
...
Constify the array itself since it need not be writable.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-11 19:03:27 +00:00
42d5f9c6ef
2011-02-09 Michael Snyder <msnyder@vmware.com>
...
* i386-dis.c (OP_J): Parenthesize expression to prevent
truncated addresses.
(print_insn): Fix indentation off-by-one.
2011-02-09 18:43:41 +00:00
4be0c94123
Updated Danish translation.
2011-02-01 13:14:40 +00:00
6b069ee70d
* ppc-opc.c (NON32, NO371): Remove PPC_OPCODE_PPCPS.
2011-01-21 00:53:11 +00:00
e3949f17f3
Properly sign-extend byte.
...
gas/testsuite/
2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/intel.d: Updated.
* gas/i386/opcode-intel.d: Likewise.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
opcodes/
2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (sIbT): New.
(b_T_mode): Likewise.
(dis386): Replace sIb with sIbT on "pushT".
(x86_64_table): Replace sIb with Ib on "aam" and "aad".
(OP_sI): Handle b_T_mode. Properly sign-extend byte.
2011-01-18 17:08:13 +00:00
752573b292
opcodes/
...
* i386-init.h: Regenerated.
* i386-tbl.h: Regenerated.
2011-01-18 14:14:46 +00:00
2a2a0f38e7
Add support for TBM instructions.
...
gas/
2011-01-17 Quentin Neill <quentin.neill@amd.com>
* config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
* doc/c-i386.texi (i386-TBM): New section.
opcodes/
2011-01-17 Quentin Neill <quentin.neill@amd.com>
* i386-dis.c (REG_XOP_TBM_01): New.
(REG_XOP_TBM_02): New.
(reg_table): Add REG_XOP_TBM_01 and REG_XOP_TBM_02 tables.
(xop_table): Redirect to REG_XOP_TBM_01 and REG_XOP_TBM_02
entries, and add bextr instruction.
* i386-gen.c (cpu_flag_init): Add CPU_TBM_FLAGS, CpuTBM.
(cpu_flags): Add CpuTBM.
* i386-opc.h (CpuTBM) New.
(i386_cpu_flags): Add bit cputbm.
* i386-opc.tbl: Add bextr, blcfill, blci, blcic, blcmsk,
blcs, blsfill, blsic, t1mskc, and tzmsk.
* i386-init.h: Regenerated.
* i386-tbl.h: Regenerated
gas/testsuite
2011-01-17 Quentin Neill <quentin.neill@amd.com>
* gas/i386/tbm.s: New.
* gas/i386/tbm.d: New.
* gas/i386/tbm-intel.d: New.
* gas/i386/x86-64-tbm.s: New.
* gas/i386/x86-64-tbm.d: New.
* gas/i386/x86-64-tbm-intel.d: New.
* gas/i386/arch-10.d: Add tbm flag and TBM instruction pattern.
* gas/i386/arch-10.s: Add a TBM instruction.
* gas/i386/arch-10-1.l: Add TBM instruction pattern.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
2011-01-17 18:40:36 +00:00
90d6ff629e
* rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg.
2011-01-12 07:06:29 +00:00
c95354ed13
Take unadjusted offset for loongson3a specific instructions.
2011-01-11 07:22:09 +00:00
f74656046a
* po/da.po: Updated Danish translation.
2011-01-10 13:51:10 +00:00
639e30d297
gas/testsuite/
...
* gas/arm/blx-bad.s: New.
* gas/arm/blx-bad.d: New.
opcodes/
* arm-dis.c (thumb32_opcodes): BLX must have bit zero clear.
2011-01-06 14:30:43 +00:00
f12dc42220
Implement BMI instructions.
2011-01-05 00:16:57 +00:00
cb21baef77
Add VexGdq.
...
2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (VexGdq): New.
(OP_VEX): Handle dq_mode.
2011-01-04 20:53:32 +00:00
4fb3aee212
Update copyright in comments to 2011.
2011-01-01 21:42:17 +00:00
0db46eb403
Update copyright to 2011.
...
binutils/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright to 2011.
gas/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* gas.c (parse_args): Update copyright to 2011.
gold/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* version.cc (print_version): Update copyright to 2011.
ld/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright to 2011.
opcodes/
2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright to 2011.
2011-01-01 20:55:48 +00:00
9e9e082043
Rotate binutils ChangeLogs.
2011-01-01 16:43:53 +00:00
3c853d9313
PR gas/11395
...
* config/tc-hppa.c (pa_ip): Revert last change. Add variable need_cond
to determine whether a 64-bit condition is needed for 'A' and 'S'
conditions. Default to 32-bit never condition for logical and unit
instructions. Add error message for missing branch on bit condition.
* hppa.h (pa_opcodes): Revert last change. Exchange 32 and 64-bit
"bb" entries.
* hppa-dis.c (compare_cond_64_names): Change never condition to ",*".
(add_cond_64_names): Likewise.
(logical_cond_64_names): Likewise.
(unit_cond_64_names): Likewise.
2010-12-31 16:43:46 +00:00
351f65ca26
Add x86-64 ILP32 support.
...
bfd/
2010-12-30 H.J. Lu <hongjiu.lu@intel.com>
* archures.c (bfd_mach_x64_32): New.
(bfd_mach_x64_32_intel_syntax): Likewise.
* bfd-in2.h: Regenerated.
* config.bfd (targ64_selvecs): Add bfd_elf32_x86_64_vec for
i[3-7]86-*-linux-*.
(targ_selvecs): Add bfd_elf32_x86_64_vec for x86_64-*-linux-*.
* configure.in: Support bfd_elf32_x86_64_vec.
* configure: Regenerated.
* cpu-i386.c (bfd_x64_32_arch_intel_syntax): New.
(bfd_x64_32_arch): Likewise.
* elf-bfd.h (elf_append_rela): New prototype.
(elf_append_rel): Likewise.
(elf64_r_info): Likewise.
(elf32_r_info): Likewise.
(elf64_r_sym): Likewise.
(elf32_r_sym): Likewise.
* elf64-x86-64.c (ABI_64_P): New.
(elf_x86_64_info_to_howto): Replace ELF64_R_TYPE with
ELF32_R_TYPE. Replace ELF64_ST_TYPE with ELF_ST_TYPE.
(elf_x86_64_check_tls_transition):Likewise.
(elf_x86_64_check_relocs): Likewise.
(elf_x86_64_gc_mark_hook):Likewise.
(elf_x86_64_gc_sweep_hook): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_reloc_type_class): Likewise.
(ELF_DYNAMIC_INTERPRETER): Renamed to ...
(ELF64_DYNAMIC_INTERPRETER): This.
(ELF32_DYNAMIC_INTERPRETER): New.
(elf_x86_64_link_hash_table): Add r_info, r_sym, swap_reloca_out,
dynamic_interpreter and dynamic_interpreter_size.
(elf_x86_64_get_local_sym_hash): Replace ELF64_R_SYM with
htab->r_sym. Replace ELF64_R_INFO with htab->r_info.
(elf_x86_64_get_local_sym_hash): Likewise.
(elf_x86_64_check_tls_transition):Likewise.
(elf_x86_64_check_relocs): Likewise.
(elf_x86_64_gc_mark_hook):Likewise.
(elf_x86_64_gc_sweep_hook): Likewise.
(elf_x86_64_relocate_section): Likewise.
(elf_x86_64_finish_dynamic_symbol): Likewise.
(elf_x86_64_finish_local_dynamic_symbol): Likewise.
(elf_x86_64_link_hash_table_create): Initialize r_info, r_sym,
swap_reloca_out, dynamic_interpreter and dynamic_interpreter_size.
(elf_x86_64_check_relocs): Check ABI_64_P when requesting for
PIC.
(elf_x86_64_relocate_section): Likewise.
(elf64_x86_64_adjust_dynamic_symbol): Replace sizeof
(Elf64_External_Rela) with bed->s->sizeof_rela.
(elf64_x86_64_allocate_dynrelocs): Likewise.
(elf64_x86_64_size_dynamic_sections): Likewise.
(elf64_x86_64_finish_dynamic_symbol): Likewise.
(elf64_x86_64_append_rela): Removed.
(elf32_x86_64_elf_object_p): New.
Add bfd_elf32_x86_64_vec.
* elf64-x86-64.c (elf64_x86_64_xxx): Renamed to ...
(elf_x86_64_xxx): This.
* elflink.c (bfd_elf_final_link): Check ELF file class on error.
(elf_append_rela): New.
(elf_append_rel): Likewise.
(elf64_r_info): Likewise.
(elf32_r_info): Likewise.
(elf64_r_sym): Likewise.
(elf32_r_sym): Likewise.
* targets.c (bfd_elf32_x86_64_vec): New.
(_bfd_target_vector): Add bfd_elf32_x86_64_vec.
gas/
2010-12-30 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (x86_elf_abi): New.
(i386_mach): Return bfd_mach_x64_32 for ILP32.
(OPTION_N32): Likewise.
(md_longopts): Add "n32" for ELF.
(md_parse_option): Handle OPTION_N32.
(md_show_usage): Add --n32.
(i386_target_format): Update and check x86_elf_abi.
* config/tc-i386.h (ELF_TARGET_FORMAT32): New.
* doc/as.texinfo: Document --n32.
* doc/c-i386.texi: Likewise.
gas/testsuite/
2010-12-30 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/ilp32/lns/ilp32.exp: New.
* gas/i386/ilp32/lns/lns-common-1.d: Likewise.
* gas/i386/ilp32/lns/lns-duplicate.d: Likewise.
* gas/i386/ilp32/cfi/cfi-common-1.d: New.
* gas/i386/ilp32/cfi/cfi-common-2.d: Likewise.
* gas/i386/ilp32/cfi/cfi-common-3.d: Likewise.
* gas/i386/ilp32/cfi/cfi-common-4.d: Likewise.
* gas/i386/ilp32/cfi/cfi-common-5.d: Likewise.
* gas/i386/ilp32/cfi/cfi-common-6.d: Likewise.
* gas/i386/ilp32/cfi/cfi-common-7.d: Likewise.
* gas/i386/ilp32/cfi/cfi-x86_64.d: Likewise.
* gas/i386/ilp32/cfi/ilp32.exp: Likewise.
* gas/i386/ilp32/elf/ehopt0.d: Likewise.
* gas/i386/ilp32/elf/equ-reloc.d: Likewise.
* gas/i386/ilp32/elf/file.d: Likewise.
* gas/i386/ilp32/elf/group0a.d: Likewise.
* gas/i386/ilp32/elf/group0b.d: Likewise.
* gas/i386/ilp32/elf/group1a.d: Likewise.
* gas/i386/ilp32/elf/group1b.d: Likewise.
* gas/i386/ilp32/elf/ifunc-1.d: Likewise.
* gas/i386/ilp32/elf/ilp32.exp: Likewise.
* gas/i386/ilp32/elf/redef.d: Likewise.
* gas/i386/ilp32/elf/section0.d: Likewise.
* gas/i386/ilp32/elf/section1.d: Likewise.
* gas/i386/ilp32/elf/section3.d: Likewise.
* gas/i386/ilp32/elf/section4.d: Likewise.
* gas/i386/ilp32/elf/section6.d: Likewise.
* gas/i386/ilp32/elf/section7.d: Likewise.
* gas/i386/ilp32/elf/struct.d: Likewise.
* gas/i386/ilp32/elf/symtab.d: Likewise.
* gas/i386/ilp32/elf/symver.d: Likewise.
* gas/i386/ilp32/ilp32.exp: New.
* gas/i386/ilp32/immed64.d: Likewise.
* gas/i386/ilp32/mixed-mode-reloc64.d: Likewise.
* gas/i386/ilp32/reloc64.d: Likewise.
* gas/i386/ilp32/rex.d: Likewise.
* gas/i386/ilp32/rexw.d: Likewise.
* gas/i386/ilp32/svme64.d: Likewise.
* gas/i386/ilp32/x86-64-addr32.d: Likewise.
* gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
* gas/i386/ilp32/x86-64-aes.d: Likewise.
* gas/i386/ilp32/x86-64-aes-intel.d: Likewise.
* gas/i386/ilp32/x86-64-amdfam10.d: Likewise.
* gas/i386/ilp32/x86-64-arch-1.d: Likewise.
* gas/i386/ilp32/x86-64-arch-2.d: Likewise.
* gas/i386/ilp32/x86-64-avx.d: Likewise.
* gas/i386/ilp32/x86-64-avx-intel.d: Likewise.
* gas/i386/ilp32/x86-64-avx-swap.d: Likewise.
* gas/i386/ilp32/x86-64-avx-swap-intel.d: Likewise.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
* gas/i386/ilp32/x86-64-cbw.d: Likewise.
* gas/i386/ilp32/x86-64-cbw-intel.d: Likewise.
* gas/i386/ilp32/x86-64-clmul.d: Likewise.
* gas/i386/ilp32/x86-64-clmul-intel.d: Likewise.
* gas/i386/ilp32/x86-64-crc32.d: Likewise.
* gas/i386/ilp32/x86-64-crc32-intel.d: Likewise.
* gas/i386/ilp32/x86-64-crx.d: Likewise.
* gas/i386/ilp32/x86-64-crx-suffix.d: Likewise.
* gas/i386/ilp32/x86-64.d: Likewise.
* gas/i386/ilp32/x86-64-disp.d: Likewise.
* gas/i386/ilp32/x86-64-disp-intel.d: Likewise.
* gas/i386/ilp32/x86-64-drx.d: Likewise.
* gas/i386/ilp32/x86-64-drx-suffix.d: Likewise.
* gas/i386/ilp32/x86-64-ept.d: Likewise.
* gas/i386/ilp32/x86-64-ept-intel.d: Likewise.
* gas/i386/ilp32/x86-64-fma4.d: Likewise.
* gas/i386/ilp32/x86-64-fma.d: Likewise.
* gas/i386/ilp32/x86-64-fma-intel.d: Likewise.
* gas/i386/ilp32/x86-64-gidt.d: Likewise.
* gas/i386/ilp32/x86-64-ifunc.d: Likewise.
* gas/i386/ilp32/x86-64-intel64.d: Likewise.
* gas/i386/ilp32/x86-64-io.d: Likewise.
* gas/i386/ilp32/x86-64-io-intel.d: Likewise.
* gas/i386/ilp32/x86-64-io-suffix.d: Likewise.
* gas/i386/ilp32/x86-64-localpic.d: Likewise.
* gas/i386/ilp32/x86-64-mem.d: Likewise.
* gas/i386/ilp32/x86-64-mem-intel.d: Likewise.
* gas/i386/ilp32/x86-64-movbe.d: Likewise.
* gas/i386/ilp32/x86-64-movbe-intel.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1-core2.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1-k8.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1-nocona.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1-pentium.d: Likewise.
* gas/i386/ilp32/x86-64-nops-2.d: Likewise.
* gas/i386/ilp32/x86-64-nops-3.d: Likewise.
* gas/i386/ilp32/x86-64-nops-4-core2.d: Likewise.
* gas/i386/ilp32/x86-64-nops-4.d: Likewise.
* gas/i386/ilp32/x86-64-nops-4-k8.d: Likewise.
* gas/i386/ilp32/x86-64-nops-5.d: Likewise.
* gas/i386/ilp32/x86-64-nops-5-k8.d: Likewise.
* gas/i386/ilp32/x86-64-nops.d: Likewise.
* gas/i386/ilp32/x86-64-opcode.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/ilp32/x86-64-opts.d: Likewise.
* gas/i386/ilp32/x86-64-opts-intel.d: Likewise.
* gas/i386/ilp32/x86-64-pcrel.d: Likewise.
* gas/i386/ilp32/x86-64-reg.d: Likewise.
* gas/i386/ilp32/x86-64-reg-intel.d: Likewise.
* gas/i386/ilp32/x86-64-rep.d: Likewise.
* gas/i386/ilp32/x86-64-rep-suffix.d: Likewise.
* gas/i386/ilp32/x86-64-rip.d: Likewise.
* gas/i386/ilp32/x86-64-rip-intel.d: Likewise.
* gas/i386/ilp32/x86-64-sib.d: Likewise.
* gas/i386/ilp32/x86-64-sib-intel.d: Likewise.
* gas/i386/ilp32/x86-64-simd.d: Likewise.
* gas/i386/ilp32/x86-64-simd-intel.d: Likewise.
* gas/i386/ilp32/x86-64-simd-suffix.d: Likewise.
* gas/i386/ilp32/x86-64-sse2avx.d: Likewise.
* gas/i386/ilp32/x86-64-sse2avx-opts.d: Likewise.
* gas/i386/ilp32/x86-64-sse2avx-opts-intel.d: Likewise.
* gas/i386/ilp32/x86-64-sse3.d: Likewise.
* gas/i386/ilp32/x86-64-sse4_1.d: Likewise.
* gas/i386/ilp32/x86-64-sse4_1-intel.d: Likewise.
* gas/i386/ilp32/x86-64-sse4_2.d: Likewise.
* gas/i386/ilp32/x86-64-sse4_2-intel.d: Likewise.
* gas/i386/ilp32/x86-64-sse-check.d: Likewise.
* gas/i386/ilp32/x86-64-sse-check-none.d: Likewise.
* gas/i386/ilp32/x86-64-sse-check-warn.d: Likewise.
* gas/i386/ilp32/x86-64-sse-noavx.d: Likewise.
* gas/i386/ilp32/x86-64-ssse3.d: Likewise.
* gas/i386/ilp32/x86-64-stack.d: Likewise.
* gas/i386/ilp32/x86-64-stack-intel.d: Likewise.
* gas/i386/ilp32/x86-64-stack-suffix.d: Likewise.
* gas/i386/ilp32/x86-64-unwind.d: Likewise.
* gas/i386/ilp32/x86-64-vmx.d: Likewise.
* gas/i386/ilp32/x86-64-xsave.d: Likewise.
* gas/i386/ilp32/x86-64-xsave-intel.d: Likewise.
ld/
2010-12-30 H.J. Lu <hongjiu.lu@intel.com>
* emulparams/elf32_x86_64.sh: New.
* configure.tgt (targ64_extra_emuls): Add elf32_x86_64 for
i[3-7]86-*-linux-*.
(targ_extra_libpath): Likewise.
(targ_extra_emuls): Add elf32_x86_64 for x86_64-*-linux-*.
(targ_extra_libpath): Likewise.
* Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf32_x86_64.c.
(eelf32_x86_64.c): New.
* Makefile.in: Regenerated.
opcodes/
2010-12-30 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (print_insn): Support bfd_mach_x64_32 and
bfd_mach_x64_32_intel_syntax.
2010-12-31 00:33:36 +00:00
9867540240
include/opcode/
...
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* mips.h (OP_*_OFFSET_A, OP_*_OFFSET_B, OP_*_OFFSET_C)
(OP_*_RZ, OP_*_FZ, INSN2_M_FP_D, INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z)
(INSN2_READ_GPR_Z, INSN2_READ_FPR_Z, INSN2_READ_GPR_D): Define.
opcodes/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* mips-opc.c (WR_z, WR_Z, RD_z, RD_Z, RD_d): Define.
(mips_builtin_opcodes): Add loongson3a specific instructions.
* mips-dis.c (print_insn_args): Handle the new arguments +a|b|c|z|Z.
gas/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* config/tc-mips.c (insn_uses_reg): Handle the new flags
INSN2_READ_FPR_Z, INSN2_READ_GPR_D and INSN2_READ_GPR_Z.
(append_insn): Handle delay-slot filling for the new flags.
(validate_mips_insn): Handle the new arguments +a|b|c|z|Z.
(mips_ip): Handle the new arguments +a|b|c|z|Z.
gas/testsuite/
2010-12-14 Mingjie Xing <mingjie.xing@gmail.com>
* gas/mips/loongson-3a-2.s, gas/mips/loongson-3a-2.d,
gas/mips/loongson-3a-3.s, gas/mips/loongson-3a-3.d: New tests.
* gas/mips/mips.exp: Run them.
2010-12-18 11:14:14 +00:00
a471ec3a5c
opcodes/
...
2010-12-03 Mingming Sun <mingm.sun@gmail.com>
* mips-opc.c: (mips_builtin_opcodes): Add loongson3a mul/div and
fixed point instructions.
gas/testsuite/
2010-12-03 Mingming Sun <mingm.sun@gmail.com>
* gas/mips/loongson-3a.s, gas/mips/loongson-3a.d: New test.
* gas/mips/mips.exp: Run it.
2010-12-11 10:48:55 +00:00
8b9a522f57
bfd/binutils/gas/gprof/ld/libiberty/opcodes: add .gitignore
...
This seems to cover a few random targets as well as --enable-targets=all.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-09 09:03:18 +00:00
1de34e0afe
Update translations
2010-11-25 06:08:52 +00:00
fd50354116
bfd/
...
* archures.c (bfd_mach_mips_loongson_3a): Defined.
* bfd-in2.h (bfd_mach_mips_loongson_3a): Defined.
* cpu-mips.c (I_loongson_3a): New add.
(arch_info_struct): Add loongson_3a.
* elfxx-mips.c (_bfd_elf_mips_mach): Add loongson_3a.
(mips_set_isa_flags): Add loongson_3a.
(mips_mach_extensions): Add loongson_3a in MIPS64 extensions.
binutils/
* readelf.c (get_machine_flags): Add loongson-3a.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add loongson3a in MIPS 64.
* doc/c-mips.texi (MIPS cpu): Add loongson3a.
include/
* elf/mips.h (E_MIPS_MACH_LS3A): Defined.
* opcode/mips.h (INSN_LOONGSON_3A): Defined.
(CPU_LOONGSON_3A): Defined.
(OPCODE_IS_MEMBER): Add LOONGSON_3A.
opcodes/
* mips-dis.c (mips_arch_choices): Add loongson3a.
* mips-opc.c (IL3A): Defined as INSN_LOONGSON_3A.
(mips_builtin_opcodes): Modify some instructions' membership from
IL2F to IL2F|IL3A, since these instructions are supported by Loongson_3A.
2010-11-11 10:23:39 +00:00
8e295ce05a
Updated translations.
2010-11-10 14:39:10 +00:00
2ee0aedfb8
bfd/
...
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/bfd.pot: Regenerate
binutils/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/binutils.pot: Regenerate
gas/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/gas.pot: Regenerate
* po/POTFILES.in: Regenerate
gprof/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/gprof.pot: Regenerate
ld/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/ld.pot: Regenerate
* po/POTFILES.in: Regenerate
opcodes/
2010-11-05 Tristan Gingold <gingold@adacore.com>
* po/opcodes.pot: Regenerate
2010-11-05 10:25:11 +00:00
af47889861
* mips-opc.c (mips_builtin_opcodes): Fix formatting of "ld".
2010-10-28 13:49:51 +00:00
be7a250d1a
2010-10-28 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* config/tc-s390.c (md_begin): Only add to hash table if cpu and
mode mask fit.
2010-10-28 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.txt: cfxr, cfdr and cfer z900 -> g5.
2010-10-28 07:37:45 +00:00
d958d1a369
2010-10-25 Chao-ying Fu <fu@mips.com>
...
* mips-opc.c (madd, maddu, msub, msubu, mult, multu): Change D33 to D32.
2010-10-25 18:09:10 +00:00
c0621d88b0
bfd/
...
* elf32-tic6x.c: Add attribution.
gas/
* config/tc-tic6x.c: Add attribution.
opcodes/
* tic6x-dis.c: Add attribution.
2010-10-25 15:33:54 +00:00
a43817dfc9
* Makefile.am (CLEANFILES): Add stamp-lm32. Sort.
...
* Makefile.in: Regenerate.
2010-10-21 23:50:57 +00:00
704897fbef
opcodes/
...
* mips-opc.c (mips_builtin_opcodes): Move M_LD_OB and M_SD_OB
macros before their corresponding MIPS III hardware instructions.
gas/
* config/tc-mips.c (macro)[M_LD_OB, M_SD_OB]: Handle 64-bit ABIs.
gas/testsuite/
* gas/mips/lineno.s: Convert to o32.
* gas/mips/lineno.d: Adjust patterns accordingly. Force the o32
ABI.
2010-10-18 00:15:35 +00:00
da98bb4c74
Add CpuNop to CPU_GENERIC64_FLAGS.
...
gas/testsuite/
2010-10-16 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run x86-64-nops-1-g64.
* gas/i386/x86-64-nops-1.d: Remove -mtune=generic64.
* gas/i386/x86-64-nops-1-g64.d: New.
opcodes/
2010-10-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Add CpuNop to CPU_GENERIC64_FLAGS.
* i386-init.h: Regenerated.
2010-10-16 21:53:16 +00:00
e1791cb8b5
gas: blackfin: fix encoding of BYTEOP2M insn
...
The BYTEOP2M parser incorrectly calls BYTEOP2P to generate the opcode.
Once we've fixed that, it's easy to see that the disassembler also likes
to decode this insn incorrectly. So fix that and then add some tests.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-15 20:44:46 +00:00
553d0a7447
Remove CheckRegSize from movq.
...
2010-10-14 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Remove CheckRegSize from movq.
* i386-tbl.h: Regenerated.
2010-10-14 23:16:19 +00:00
cfc08d490e
Remove CheckRegSize from instructions with 0, 1 or fixed operands.
...
2010-10-14 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Remove CheckRegSize from instructions with
0, 1 or fixed operands.
* i386-tbl.h: Regenerated.
2010-10-14 21:37:30 +00:00
56ffb74112
Add CheckRegSize to instructions which require register size check.
...
gas/
2010-10-14 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (match_template): Check checkregsize
instead of w for register size check.
gas/testsuite/
2010-10-14 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run inval-reg.
* gas/i386/inval-reg.l: New.
* gas/i386/inval-reg.s: Likewise.
opcodes/
2010-10-14 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Add CheckRegSize.
* i386-opc.h (CheckRegSize): New.
(i386_opcode_modifier): Add checkregsize.
* i386-opc.tbl: Add CheckRegSize to instructions which
require register size check.
* i386-tbl.h: Regenerated.
2010-10-14 18:45:10 +00:00
1a2dab1fbb
binutils/:
...
* binutils-all/m68k/objdump.exp: Add fnop test.
* binutils-all/m68k/fnop.s: New file.
opcodes/:
* m68k-opc.c (m68k_opcodes): Move fnop before fbf.
2010-10-11 22:18:42 +00:00
a3ec2691d0
2010-10-11 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* s390-opc.c: Make the instruction masks for the load/store on
condition instructions to cover the condition code mask as well.
* s390-opc.txt: lgoc -> locg and stgoc -> stocg.
2010-10-11 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/zarch-z196.d: Adjust the load/store on condition
instructions.
* gas/s390/zarch-z196.s: Likewise.
2010-10-11 11:56:53 +00:00
d92fa646e7
opcodes/
...
* Makefile.am (libopcodes_a_SOURCES): New as empty.
* Makefile.in: Regenerate.
2010-10-11 06:10:35 +00:00
4469d2be4b
cgen/
...
* utils-cgen.scm (gen-attr-accessors): Rename bool attribute to bool_.
* cpu/mep.opc (mep_cgen_insn_supported): Ditto.
include/opcode/
* cgen.h (CGEN_ATTR, CGEN_ATTR_TYPE): Rename bool attribute to bool_.
(CGEN_ATTR_BOOLS, CGEN_ATTR_CGEN_INSN_ALIAS_VALUE): Likewise.
opcodes/
* fr30-desc.h: Regenerate.
* frv-desc.h: Regenerate.
* ip2k-desc.h: Regenerate.
* iq2000-desc.h: Regenerate.
* lm32-desc.h: Regenerate.
* m32c-desc.h: Regenerate.
* m32r-desc.h: Regenerate.
* mep-desc.h: Regenerate.
* mep-opc.c: Regenerate.
* mt-desc.h: Regenerate.
* openrisc-desc.h: Regenerate.
* xc16x-desc.h: Regenerate.
* xstormy16-desc.h: Regenerate.
2010-10-09 06:50:23 +00:00
9ccb8af972
Fix build with -DDEBUG=7
2010-10-08 14:00:50 +00:00
5d4c71e127
gas/
...
* config/tc-tic6x.c (tic6x_try_encode): Correct encoding of fstg field
in SPKERNEL instructions.
opcodes/
* tic6x-dis.c (print_insn_tic6x): Correct decoding of fstg field
in SPKERNEL instructions.
gas/testsuite/
* gas/tic6x/insns-c674x-sploop.d: Add two more sploop/spkernel tests.
* gas/tic6x/insns-c674x-sploop.s: Likewise.
2010-10-07 11:28:49 +00:00
9ce00134f4
Remove duplicated RMAL.
...
2010-10-02 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/12076
* i386-dis.c (RMAL): Remove duplicate.
2010-10-02 07:04:07 +00:00
e7390eec2e
* s390-mkopc.c (main): Exit with error 1 if sscanf fails
...
to parse all 6 parameters.
2010-09-30 16:02:35 +00:00
d2ae9c847a
* s390-mkopc.c (main): Change description array size to 80.
...
Add maximum length of 79 to description parsing.
2010-09-30 11:32:15 +00:00
3cac54d216
Fix unportable shell quoting.
...
/:
Sync from GCC:
PR bootstrap/44621
* configure.ac: Fix unportable shell quoting.
* configure: Regenerate.
config/:
* po.m4 (AM_PO_SUBDIRS): Fix unportable shell quoting.
bfd/:
* configure: Regenerate.
gas/:
* configure: Regenerate.
gold/:
* configure: Regenerate.
intl/:
* configure: Regenerate.
ld/:
* configure: Regenerate.
opcodes/:
* configure: Regenerate.
binutils/:
* configure: Regenerate.
gprof/:
* configure: Regenerate.
2010-09-27 20:23:01 +00:00
d9aee5d7f7
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* s390-mkopc.c (enum s390_opcde_cpu_val): Add S390_OPCODE_Z196.
(main): Recognize the new CPU string.
* s390-opc.c: Add new instruction formats and masks.
* s390-opc.txt: Add new z196 instructions.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* opcode/s390.h: Add S390_OPCODE_Z196 to enum s390_opcode_cpu_val.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* config/tc-s390.c: (md_parse_option): New option -march=z196.
* doc/c-s390.texi: Document new option.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/s390.exp: Run the zarch-z196 test.
* gas/s390/zarch-z196.d: Add new instructions.
* gas/s390/zarch-z196.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
2010-09-27 13:36:48 +00:00
02cbf7671a
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
...
* s390-dis.c (print_insn_s390): Pick instruction with most
specific mask.
* s390-opc.c: Add unused bits to the insn mask.
* s390-opc.txt: Reorder some instructions to prefer more recent
versions.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/esa-g5.d: Adjust serveral instructions.
* gas/s390/esa-reloc.d: Likewise.
* gas/s390/esa-z990.d: Likewise.
* gas/s390/zarch-reloc.d: Likewise.
* gas/s390/zarch-z10.d: Likewise.
* gas/s390/zarch-z9-ec.d: Likewise.
* gas/s390/zarch-z900.d: Likewise.
2010-09-27 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* ld-s390/tlsbin.dd: bcr 0,%r7 -> nopr %r7.
* ld-s390/tlsbin_64.dd: Likewise.
* ld-s390/tlspic.dd: Likewise.
* ld-s390/tlspic_64.dd: Likewise.
2010-09-27 13:33:00 +00:00
6844b2c2db
2010-09-27 Tejas Belagod <tejas.belagod@arm.com>
...
* gas/config/tc-arm.c (do_neon_ldr_str): Deprecate ARM-mode PC-relative
VSTR, issue an error in THUMB mode.
* opcodes/arm_dis.c (print_insn_coprocessor): Apply off-by-alignment
correction to unaligned PCs while printing comment.
* gas/testsuite/gas/arm/vldr.s: New test for pc-relative VLDR disassembly comment.
* gas/testsuite/gas/arm/vldr.d: Likewise.
* gas/testsuite/gas/arm/vstr-bad.s: New test for PC-relative VSTR.
* gas/testsuite/gas/arm/vstr-thumb-bad.l: Likewise.
* gas/testsuite/gas/arm/vstr-thumb-bad.d: Likewise.
* gas/testsuite/gas/arm/vstr-arm-bad.l: Likewise.
* gas/testsuite/gas/arm/vstr-arm-bad.d: Likewise.
2010-09-27 09:47:05 +00:00
90ec0d684e
* bfd/bfd-in2.h (BFD_RELOC_ARM_HVC): New enum value.
...
* gas/config/tc-arm.c (arm_ext_virt): New variable.
(arm_reg_type): Add REG_TYPE_RNB for banked registers.
(reg_entry): Allow registers to be larger than a byte.
(reg_alias): Fix type warning.
(parse_operands): Parse banked registers when appropriate.
(do_mrs): Add support for Virtualization Extensions.
(do_hvc): New function.
(do_t_mrs): Add support for Virtualization Extensions.
(do_t_msr): Likewise.
(do_t_hvc): New function.
(SPLRBANK): New define.
(reg_names): Add banked registers.
(insns): Add support for Virtualization Extensions.
(md_apply_fixup): Likewise.
(arm_cpus): -mcpu=cortex-a15 implies the Virtualization Extensions.
(arm_extensions): Add 'virt' extension.
(aeabi_set_public_attributes): Add support for Virtualization
Extensions.
* gas/doc/c-arm.texi: Document 'virt' extension.
* gas/testsuite/gas/arm/armv7-a+virt.d: New test.
* gas/testsuite/gas/arm/armv7-a+virt.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Virtualization Extensions.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec+virt.d: New test.
* gas/testsuite/gas/arm/attr-march-armv7-a+virt.d: Likewise.
* include/opcode/arm.h (ARM_EXT_VIRT): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Rename...
(ARM_ARCH_V7A_IDIV_MP_SEC_VIRT): ...to this and include Virtualization
Extensions.
* opcodes/arm-dis.c (arm_opcodes): Add Virtualiztion Extensions support.
(thumb32_opcodes): Likewise.
(banked_regname): New function.
(print_insn_arm): Add Virtualization Extensions support.
(print_insn_thumb32): Likewise.
2010-09-23 15:52:19 +00:00
eea54501f7
* gas/config/tc-arm.c (arm_ext_adiv): New variable.
...
(do_div): New function.
(insns): Accept UDIV and SDIV in ARM state.
(arm_cpus): The cortex-a15 option has all current v7-A extensions.
(arm_extensions): Add 'idiv' extension.
(aeabi_set_public_attributes): Update Tag_DIV_use values for the
Integer Divide extension.
* gas/doc/c-arm.texi: Document the idiv extension.
* gas/testsuite/gas/arm/armv7-a+idiv.d: New test.
* gas/testsuite/gas/arm/armv7-a+idiv.s: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Integer divide extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+idiv.d: New test.
* include/opcode/arm.h (ARM_AEXT_ADIV): New define.
(ARM_ARCH_V7A_IDIV_MP_SEC): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Support disassembly of UDIV and SDIV in
ARM state.
2010-09-23 15:37:45 +00:00
f4c65163c7
* gas/config/tc-arm.c (arm_ext_v6z): Remove.
...
(arm_ext_sec): New variable.
(do_t_smc): In Thumb state SMC requires v7-A.
(insns): Make SMC depend on Security Extensions.
(arm_cpus): All -mcpu=cortex-a* options have the Security Extensions.
(arm_extensions): Add 'sec' extension.
(cpu_arch_ver): Reorder.
(aeabi_set_public_attributes): Emit Tag_Virtualization_use as
appropriate.
* gas/doc/c-arm.texi: Document Security Extensions.
* gas/testsuite/gas/arm/attr-march-all.d: Update for Security Extensions..
* gas/testsuite/gas/arm/attr-march-armv6k+sec.d: New test.
* gas/testsuite/gas/arm/attr-march-armv6z.d: Update for Security Extensions.
* gas/testsuite/gas/arm/attr-march-armv6zk.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zkt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv6zt2.d: Likewise.
* gas/testsuite/gas/arm/attr-march-armv7-a+sec.d: New test.
* gas/testsuite/gas/arm/attr-mcpu.d: Update for Security Extensions.
* gas/testsuite/gas/arm/thumb32.d: Likewise.
* gas/testsuite/gas/arm/thumb32.s: Likewise.
* include/opcode/arm.h (ARM_EXT_V6Z): Remove.
(ARM_EXT_SEC): New define.
(ARM_AEXT_V6Z): Use Security Extensions.
(ARM_AEXT_V6ZK): Likeiwse.
(ARM_AEXT_V6ZT2): Likewise.
(ARM_AEXT_V6ZKT2): Likewise.
(ARM_AEXT_V7_ARM): Base v7 does not have Security Extensions.
(ARM_ARCH_V7A_SEC): New define.
(ARM_ARCH_V7A_MP): Rename...
(ARM_ARCH_V7A_MP_SEC): ...to this and add Security Extensions.
* ld/testsuite/ld-arm/attr-merge-6.attr: Update for Security Extensions.
* ld/testsuite/ld-arm/attr-merge-7.attr: Likewise.
* opcodes/arm-dis.c (arm_opcodes): SMC implies Security Extensions.
(thumb32_opcodes): Likewise.
2010-09-23 15:26:24 +00:00
60e5ef9f19
* gas/config/tc-arm.c (arm_ext_mp): Add.
...
(do_pld): Update comment.
(insns): Add support for pldw.
(arm_cpus): Update cortex-a5, cortex-a9, and cortex-a15 to support
MP extension.
(arm_extensions): Add 'mp' extension.
(aeabi_set_public_attributes): Emit correct build attribute when
MP extension is enabled.
* gas/doc/c-arm.texi: Update for MP extensions.
* gas/testsuite/gas/arm/arch7a-mp.d: Add.
* gas/testsuite/gas/arm/arch7ar-mp.s: Likewise.
* gas/testsuite/gas/arm/arch7r-mp.d: Likewise.
* gas/testsuite/gas/arm/armv2-mp-bad.d: Likewise.
* gas/testsuite/gas/arm/armv2-mp-bad.l: Likewise.
* gas/testsuite/gas/arm/attr-march-all.d: Update for MP extension.
* gas/testsuite/gas/arm/attr-march-armv7-a+mp.d: Add.
* gas/testsuite/gas/arm/attr-march-armv7-r+mp.d: Likewise.
* include/opcode/arm.h (ARM_EXT_MP): Add.
(ARM_ARCH_V7A_MP): Likewise.
* opcodes/arm-dis.c (arm_opcodes): Add support for pldw.
(thumb32_opcodes): Likewise.
2010-09-23 15:18:19 +00:00
7a360e83fc
opcodes: blackfin: fix decoding of 32bit addresses on 64bit systems
...
The Blackfin ISA is very exact with regards to address truncation when
under/over flowing its 32bit range. On a 32bit system, things work the
same and so addresses are decoded properly. On a 64bit system though,
the decoded addresses may include the bits that are supposed to have
been truncated. So force a 32bit truncation after the address has been
calculated.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:55:17 +00:00
35fc57f38c
opcodes: blackfin: fix decoding of all register move insns
...
Many register move insns were not being decoded properly, so rewrite
the whole function to be a bit more manageable in terms of valid
combinations.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:54:33 +00:00
219b747a3b
opcodes: blackfin: fix decoding of many invalid insns
...
The Blackfin disassembler was originally based on the premise of parsing
valid opcodes all the time, so some of the opcode checking can be a bit
fuzzy. This is exemplified in decoding of parallel insns where many
times things are decoded as invalid when in reality, they may not be
used in parallel combinations. So add parallel checking to most insn
decoding routines so we see ILLEGAL and not just whatever insn happens
to be close to a valid mnemonic, as well as some additional sub-opcode
checks.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:53:46 +00:00
775f1cf0c2
opcodes: blackfin: mark push/pop insns with a P6/P7 range as illegal
...
The push/pop multiple insn has a 3 bit field for the P register range,
but only values of 0...5 are valid (P0 - P5). There is no such P6 or
P7 register, so mark these insns as illegal.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:53:14 +00:00
0b7691fd6e
opcodes: blackfin: fix decoding of vector shift insn w/saturation
...
The saturation bit was missed when decoding a vector shift insn
leading to the output looking the same as the non-saturating insn.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:41:39 +00:00
b2459327a6
opcodes: blackfin: decode all ASTAT bits
...
All ASTAT bits work in the hardware even though they aren't part of the
official Blackfin ISA. So decode every ASTAT field to make the output
a bit nicer when working with hand generated opcodes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:39:08 +00:00
50e2162a22
opcodes: blackfin: decode insns with invalid register as illegal
...
Sometimes the encoding in the opcode is a 4 bit field which defines a
register number. However, register numbers are only 0-7, so make sure
we call illegal for when the opcode register number is greater than 8.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:38:20 +00:00
a01eda858f
gas: blackfin: fix DBG/DBGCMPLX insn encoding
...
Some extended registers when given to the DBG/DBGCMPLX pseudo insns are
not encoded properly. So fix them, fix the display of them when being
disassembled, and add testcases.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:26:13 +00:00
22215ae09b
opcodes/gas: blackfin: handle more ASTAT flags
...
Support a few more ASTAT bits with the standard insns that operate on
ASTAT bits directly.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 21:05:03 +00:00
73a63ccf2f
opcodes/gas: blackfin: support OUTC debug insn
...
The disassembler has partial (but incomplete/broken) support already for
the pseudo debug insn OUTC, so let's fix it up and finish it. And now
that the disassembler can handle it, make sure our assembler can output
it too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 20:59:00 +00:00
59a82d2333
opcodes: blackfin: fix decoding of LSHIFT insns
...
The Blackfin ISA does not have a "SHIFT" insn, it has either LSHIFT,
ASHIFT, or BXORSHIFT. So be specific when disassembling.
As fall out of this change, we need to update some assembler tests.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 20:37:25 +00:00
528c6277f7
opcodes: blackfin: constify formatting related structures
...
No need for these local structures related to formatting of output to
be writable, so constify the whole shebang.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-22 20:32:40 +00:00
db472d6ff0
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
...
* config/tc-arm.c (insns): Change MRC entry to accept APSR_RR instead
of just RR.
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* gas/arm/copro.s: Add test for APSR_nzcv as a MRC operand.
* gas/arm/copro.d: Change pc in MRC to disassemble as APSR_nzcv. Also
add disassembly for test added in copro.s
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* arm_dis.c (coprocessor_opcodes): Add MRC entry for APSR_nzcv.
2010-09-17 10:13:41 +00:00
f6690563bb
opcodes/
...
* mips-opc.c (mips_builtin_opcodes): Add "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb".
gas/testsuite/
* gas/mips/mips32r2-sync.d: New test for MIPS32r2 "sync"
instruction variants.
* gas/mips/octeon@mips32r2-sync.d: Likewise, Octeon version.
* gas/mips/mips32r2-sync.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
2010-09-14 23:49:04 +00:00
8901a3cd7d
* src/opcodes/dlx-dis.c (print_insn_dlx): Use dlx_insn type for
...
dlx_insn_type array.
2010-09-10 13:00:54 +00:00
d9e3625e37
Fix "pushw imm16" for x86-64 disassembler.
...
gas/testsuite/
2010-08-31 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/11960
* gas/i386/opcode-intel.d: Updated.
* gas/i386/x86-64-opcode.d: Likewise.
* gas/i386/x86-64-opcode.s: Add a "pushw imm16" test.
opcodes/
2010-08-31 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/11960
* i386-dis.c (sIv): New.
(dis386): Replace Iq with sIv on "pushT".
(reg_table): Replace T with {T|} on callT, JcallT, jmpT and JjmpT.
(x86_64_table): Replace {T|}/{P|} with P.
(putop): Add 'w' to 'T'/'P' if needed for Intel syntax.
(OP_sI): Update v_mode. Remove w_mode.
2010-08-31 21:56:57 +00:00
f383de6633
opcodes/
...
* ppc-opc.c (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate
on E500 and E500MC.
2010-08-27 13:59:55 +00:00
1ab03f4b26
Replace Eb with Mb on prefetch and prefetchw.
...
2010-08-17 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (reg_table): Replace Eb with Mb on prefetch and
prefetchw.
2010-08-17 20:37:26 +00:00
2210942396
Don't generate multi-byte NOPs for i686.
...
gas/
2010-08-06 Quentin Neill <quentin.neill@amd.com>
* config/tc-i386.c (arch_entry): Add negated bit to
disambiguate flag names starting with "no".
(cpu_arch): Add negated bit definitions. Add
".nop" CPU extension.
(i386_align_code): Use new .cpunop bit to decide
when to generate alignment using nops.
(set_cpu_arch): Use negated bit instead to decide
when to use cpu_flags or vs. cpu_flags_and_not.
(md_parse_option): Likewise.
gas/testsuite/
2010-08-06 Quentin Neill <quentin.neill@amd.com>
* gas/i386/arch-10-1.l: Add nopl instruction.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/arch-10.s: Likewise.
* gas/i386/arch-10.d: Add nopl instruction, and +nopl extension
flag to as flags.
* gas/i386/nops-5-i686.d: Change alignment code generated for
-mtune=i686.
* gas/i386/nops-5.d: Change alignment code generated for
.arch i686.
* gas/i386/x86-64-nops-5-k8.d: Likewise.
* gas/i386/x86-64-nops-5.d: Likewise.
opcodes/
2010-08-06 Quentin Neill <quentin.neill@amd.com>
* i386-gen.c (cpu_flag_init): Define CpuNop extension flag, add
to processor flags for PENTIUMPRO processors and later.
* i386-opc.h (enum): Add CpuNop.
(i386_cpu_flags): Add cpunop bit.
* i386-opc.tbl: Change nop cpu_flags.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2010-08-06 18:22:50 +00:00
b49dfb4a38
Fix typos in comments in i386-opc.h.
...
2010-08-06 Quentin Neill <quentin.neill@amd.com>
* i386-opc.h (enum): Fix typos in comments.
2010-08-06 16:33:43 +00:00
6ca4eb7789
* disassemble.c: Formatting.
...
(disassemble_init_for_target <ARCH_m32c>): Comment on endian.
2010-08-06 03:59:49 +00:00
92d4d42efb
Add Cpu186 to ud1/ud2/ud2a/ud2b.
...
2010-08-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Add Cpu186 to ud1/ud2/ud2a/ud2b.
* i386-tbl.h: Regenerated.
2010-08-06 01:03:17 +00:00
b414985b9e
Add ud1 to x86.
...
gas/testsuite/
2010-08-05 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run arch-4.
* gas/i386/arch-4.d: New.
* gas/i386/arch-4.s: Likewise.
* gas/i386/intel.d: Replace ud2a/ud2b with ud2/ud1.
* gas/i386/opcode-intel.d: Likewise.
* gas/i386/opcode-suffix.d: Likewise.
* gas/i386/opcode.d: Likewise.
opcodes/
2010-08-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386_twobyte): Replace ud2a/ud2b with ud2/ud1.
* i386-opc.tbl: Add ud1. Remove Cpu686 from ud2/ud2a/ud2b.
* i386-tbl.h: Regenerated.
2010-08-06 00:52:57 +00:00
f9c7014e9c
[include/opcode]
...
* rx.h (RX_Operand_Type): Add TwoReg.
(RX_Opcode_ID): Remove ediv and ediv2.
[opcodes]
* rx-decode.opc (SRR): New.
(rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov
r0,r0) and NOP3 (max r0,r0) special cases.
* rx-decode.c: Regenerate.
[sim/rx]
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
2010-07-29 18:41:28 +00:00
592a252b66
Add 0F to VEX opcode enums.
...
2010-07-28 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c: Add 0F to VEX opcode enums.
2010-07-28 21:54:34 +00:00
3cf79a015d
* rx-decode.opc (store_flags): Remove, replace with F_* macros.
...
(rx_decode_opcode): Likewise.
* rx-decode.c: Regenerate.
2010-07-28 00:36:46 +00:00
1cd986c585
Add support for v850E2 and v850E2V3
2010-07-23 14:52:54 +00:00
52e7f43db0
2010-07-08 Tejas Belagod <tejas.belagod@arm.com>
...
gas/testsuite
* gas/arm/barrier.s: New file.
* gas/arm/barrier.d: New file.
* gas/arm/barrier-thumb.s: New file.
* gas/arm/barrier-thumb.d: New file.
* gas/arm/barrier-bad.s: New file.
* gas/arm/barrier-bad.d: New file.
* gas/arm/barrier-bad.l: New file.
* gas/arm/barrier-bad-thumb.s: New file.
* gas/arm/barrier-bad-thumb.d: New file.
* gas/arm/barrier-bad-thumb.l: New file.
gas/config
* tc-arm.c (OP_oBARRIER): Remove.
(OP_oBARRIER_I15): Add.
(po_barrier_or_imm): Add macro.
(parse_operands): Improve OP_oBARRIER_I15 operand parsing.
(do_barrier): Check correct immediate range.
(do_t_barrier): Likewise.
(barrier_opt_names): Add entries for more symbolic operands.
(insns): Replace OP_oBARRIER with OP_oBARRIER_I15 for barriers.
opcodes/
* arm-dis.c (print_insn_arm): Add cases for printing more
symbolic operands.
(print_insn_thumb32): Likewise.
2010-07-08 22:40:28 +00:00
c680e7f672
* mips-dis.c (print_insn_mips): Correct branch instruction type
...
determination.
2010-07-06 00:06:04 +00:00
9a2c708887
gas/
...
* config/tc-mips.c (nops_for_insn_or_target): Replace
MIPS16_INSN_BRANCH with MIPS16_INSN_UNCOND_BRANCH and
MIPS16_INSN_COND_BRANCH.
include/opcode/
* mips.h (MIPS16_INSN_UNCOND_BRANCH): New macro.
(MIPS16_INSN_BRANCH): Rename to...
(MIPS16_INSN_COND_BRANCH): ... this.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Remove branch instruction
type and delay slot determination.
(print_insn_mips16): Extend branch instruction type and delay
slot determination to cover all instructions.
* mips16-opc.c (BR): Remove macro.
(UBR, CBR): New macros.
(mips16_opcodes): Update branch annotation for "b", "beqz",
"bnez", "bteqz" and "btnez". Add branch annotation for "jalrc"
and "jrc".
2010-07-06 00:02:46 +00:00
d7d9a9f820
Replace rdrnd with rdrand.
...
gas/testsuite/
2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* gas/i386/rdrnd.s: Replace rdrnd with rdrand.
* gas/i386/rdrnd-intel.d: Likewise.
* gas/i386/rdrnd.d: Likewise.
* gas/i386/x86-64-rdrnd-intel.d: Likewise.
* gas/i386/x86-64-rdrnd.d: Likewise.
* gas/i386/x86-64-rdrnd.s: Likewise.
opcodes/
2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* i386-dis.c (mod_table): Replace rdrnd with rdrand.
* i386-opc.tbl: Likewise.
* i386-tbl.h: Regenerated.
2010-07-05 17:14:22 +00:00
77321f5360
Fix a typo in comments for CpuFSGSBase.
...
2010-07-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h (CpuFSGSBase): Fix a typo in comments.
2010-07-05 16:40:32 +00:00
3a5530eaab
Update.
2010-07-03 08:29:51 +00:00
7102e95e49
gas/:
...
* config/tc-ppc.c (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t
before inverting.
binutils/:
* ppc-dis.c (powerpc_init_dialect): Cast PPC_OPCODE_xxx to
ppc_cpu_t before inverting.
2010-07-03 08:27:23 +00:00
bdc70b4a03
include/opcode/
...
* ppc.h (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC): Delete.
Renumber other PPC_OPCODE defines.
gas/
* config/tc-ppc.c (ppc_set_cpu): Remove old opcode flags.
(ppc_setup_opcodes): Likewise. Simplify opcode selection.
opcodes/
* ppc-dis.c (ppc_opts, powerpc_init_dialect): Remove old opcode flags.
* ppc-opc.c (PPC32, POWER32, COM32, CLASSIC): Delete.
(PPC64, MFDEC2): Update.
(NON32, NO371): Define.
(powerpc_opcode): Update to not use old opcode flags, and avoid
-m601 duplicates.
2010-07-03 06:51:56 +00:00
21375995bd
* m32c.cpu (f-dsp-8-s24): Mask high byte after shifting it.
...
* m32c-ibld.c: Regenerate.
2010-07-03 04:09:56 +00:00
81a0b7e2ae
* ppc-opc.c (PWR2COM): Define.
...
(PPCPWR2): Add PPC_OPCODE_COMMON.
(powerpc_opcodes): Add "subc", "subco", "subco.", "fcir", "fcir.",
"fcirz", "fcirz." to -mcom opcodes. Remove "mfsri", "dclst",
"rac" from -mcom.
2010-07-03 03:33:17 +00:00
a00eb5e843
Update ChangeLog entry.
2010-07-01 21:57:04 +00:00
c7b8aa3a72
Support AVX Programming Reference (June, 2010)
...
gas/
2010-07-01 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* config/tc-i386.c (cpu_arch): Add .xsaveopt, .fsgsbase, .rdrnd
and .f16c.
* doc/c-i386.texi: Document xsaveopt, fsgsbase, rdrnd and f16c.
gas/testsuite/
2010-07-01 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* gas/i386/arch-10.s: Add xsaveopt.
* gas/i386/x86-64-arch-2.s: Likwise.
* gas/i386/arch-10.d: Updated.
* gas/i386/arch-10-1.l: Likewise.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/f16c-intel.d: New.
* gas/i386/f16c.d: Likewise.
* gas/i386/f16c.s: Likewise.
* gas/i386/fsgs-intel.d: Likewise.
* gas/i386/fsgs.d: Likewise.
* gas/i386/fsgs.s: Likewise.
* gas/i386/rdrnd-intel.d: Likewise.
* gas/i386/rdrnd.d: Likewise.
* gas/i386/rdrnd.s: Likewise.
* gas/i386/x86-64-f16c-intel.d: Likewise.
* gas/i386/x86-64-f16c.d: Likewise.
* gas/i386/x86-64-f16c.s: Likewise.
* gas/i386/x86-64-fsgs-intel.d: Likewise.
* gas/i386/x86-64-fsgs.d: Likewise.
* gas/i386/x86-64-fsgs.s: Likewise.
* gas/i386/x86-64-rdrnd-intel.d: Likewise.
* gas/i386/x86-64-rdrnd.d: Likewise.
* gas/i386/x86-64-rdrnd.s: Likewise.
* gas/i386/i386.exp: Run f16c, f16c-intel, fsgs, fsgs-intel,
rdrnd, rdrnd-intel, x86-64-f16c, x86-64-f16c-intel, x86-64-fsgs,
x86-64-fsgs-intel, x86-64-rdrnd, x86-64-rdrnd-intel.
* gas/i386/x86-64-xsave.s: Add tests for xsaveopt64.
* gas/i386/x86-64-xsave-intel.d: Updated.
* gas/i386/x86-64-xsave.d: Likewise.
opcodes/
2010-07-01 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (June, 2010)
* i386-dis.c (PREFIX_0FAE_REG_0): New.
(PREFIX_0FAE_REG_1): Likewise.
(PREFIX_0FAE_REG_2): Likewise.
(PREFIX_0FAE_REG_3): Likewise.
(PREFIX_VEX_3813): Likewise.
(PREFIX_VEX_3A1D): Likewise.
(prefix_table): Add PREFIX_0FAE_REG_0, PREFIX_0FAE_REG_1,
PREFIX_0FAE_REG_2, PREFIX_0FAE_REG_3, PREFIX_VEX_3813 and
PREFIX_VEX_3A1D.
(vex_table): Add PREFIX_VEX_3813 and PREFIX_VEX_3A1D.
(mod_table): Add PREFIX_0FAE_REG_0, PREFIX_0FAE_REG_1,
PREFIX_0FAE_REG_2, PREFIX_0FAE_REG_3 xsaveopt and rdrnd.
* i386-gen.c (cpu_flag_init): Add CPU_XSAVEOPT_FLAGS,
CPU_FSGSBASE_FLAGS, CPU_RDRND_FLAGS and CPU_F16C_FLAGS.
(cpu_flags): Add CpuXsaveopt, CpuFSGSBase, CpuRdRnd and CpuF16C.
* i386-opc.h (CpuXsaveopt): New.
(CpuFSGSBase):Likewise.
(CpuRdRnd): Likewise.
(CpuF16C): Likewise.
(i386_cpu_flags): Add cpuxsaveopt, cpufsgsbase, cpurdrnd and
cpuf16c.
* i386-opc.tbl: Add xsaveopt, rdfsbase, rdgsbase, rdrnd,
wrfsbase, wrgsbase, vcvtph2ps and vcvtps2ph.
2010-07-01 21:55:02 +00:00
09a8ad8d8f
* ppc-opc.c (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf
...
and mtocrf on EFS.
2010-07-01 02:29:12 +00:00
360cfc9c8b
remove maxq-coff port
2010-06-29 04:17:34 +00:00
dc898d5e26
cgen/
...
* cpu/mep.opc (mep_examine_ivc2_insns): Delete set but unused var.
opcodes/
* mep-dis.c: Regenerate.
2010-06-28 14:41:59 +00:00
8e56076649
* gas/config/tc-arm.c (parse_neon_alignment): New function.
...
(parse_address_main): Fix Neon load/store alignment parsing.
* gas/testsuite/gas/arm/neon-ldst-align-bad.l: Update for Neon alignment syntax fix.
* gas/testsuite/gas/arm/neon-ldst-align-bad.s: Likewise.
* gas/testsuite/gas/arm/neon-ldst-es.d: Likewise.
* gas/testsuite/gas/arm/neon-ldst-es.s: Likewise.
* opcodes/arm-disc.c (parse_insn_neon): Fix Neon alignment syntax.
2010-06-28 09:10:25 +00:00
c7e2358a88
fix set but unused variable warnings
2010-06-27 04:07:55 +00:00
6ffe3d995f
PR gas/11673
...
* m68k-opc.c (m68k_opcodes): Remove move.l for isab and later.
* gas/m68k/p11673.s: New test.
* gas/m68k/all.exp: Run the new test.
2010-06-16 16:27:37 +00:00
09ec0d177a
2010-06-16 Vincent Rivire <vincent.riviere@freesbee.fr>
...
PR binutils/11676
* m68k-dis.c (print_insn_arg): Prefix float constants with #0e.
2010-06-16 Nick Clifton <nickc@redhat.com>
PR binutils/11676
* gas/m68k/pr11676.s: New test.
* gas/m68k/pr11676.d: Expected disassembly.
* gas/m68k/all.exp: Run the new test.
2010-06-16 15:12:51 +00:00
e01d869a3b
gas/
...
* config/tc-ppc.c (md_assemble): Emit APUinfo section for
PPC_OPCODE_E500.
gas/testsuite/
* gas/ppc/e500.s: Add eieio, mbar and lwsync
* gas/ppc/e500.d: Likewise.
include/opcode/
* ppc.h (PPC_OPCODE_E500): Define.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_E500MC from e500 and
e500x2. Add PPC_OPCODE_E500 to e500 and e500x2
* ppc-opc.c (powerpc_opcodes): Deprecate all opcodes on EFS which
touch floating point regs and are enabled by COM, PPC or PPCCOM.
Treat sync as msync on e500. Treat eieio as mbar 1 on e500.
Treat lwsync as msync on e500.
2010-06-14 14:48:05 +00:00
1f4e495053
* gas/testsuite/gas/arm/thumb-eabi.d: Add case for divided syntax encoding of movs.
...
* gas/testsuite/gas/arm/thumb.d: Likewise.
* gas/testsuite/gas/arm/thumb.s: Likewise.
* gas/testsuite/gas/arm/thumb2_it.d: Update for change in lsls/movs disassembly.
* gas/testsuite/gas/arm/thumb2_it_auto.d: Liekwise.
* gas/testsuite/gas/arm/thumb32.d: Likewise.
* ld/testsuite/ld-arm/arm-call.d: Handle change in lsls/movs disassembly.
* ld/testsuite/ld-arm/farcall-thumb-arm-short.d: Likewise.
* ld/testsuite/ld-arm/farcall-thumb-thumb-blx-pic-veneer.d: Likewise.
* ld/testsuite/ld-arm/farcall-thumb-thumb-blx.d: Likewise.
* ld/testsuite/ld-arm/farcall-thumb-thumb-m-pic-veneer.d: Likewise.
* ld/testsuite/ld-arm/farcall-thumb-thumb-m.d: Likewise.
* ld/testsuite/ld-arm/farcall-thumb-thumb-pic-veneer.d: Likewise.
* ld/testsuite/ld-arm/farcall-thumb-thumb.d: Likewise.
* ld/testsuite/ld-arm/thumb2-bl-as-thumb1-bad-noeabi.d: Likewise.
* ld/testsuite/ld-arm/thumb2-bl-as-thumb1-bad.d: Likewise.
* ld/testsuite/ld-arm/thumb2-bl-bad-noeabi.d: Likewise.
* ld/testsuite/ld-arm/thumb2-bl-bad.d: Likewise.
* opcodes/arm-dis.c (thumb-opcodes): Add disassembly for movs.
2010-06-07 10:43:52 +00:00
9d82ec3801
* opcodes/arm-dis.c (print_insn_neon): Ensure disassembly of Neon
...
constants is the same on 32-bit and 64-bit hosts.
2010-05-28 16:04:21 +00:00
c3a6ea62fc
Fix typo in ChangeLog entry.
2010-05-27 10:45:52 +00:00
d8b24b9569
* m68k-dis.c (print_insn_m68k): Emit undefined instructions as
...
.short directives so that they can be reassembled.
2010-05-27 10:43:27 +00:00
9db8dccb17
2010-05-26 Catherine Moore <clm@codesourcery.com>
...
David Ung <davidu@mips.com>
* mips-opc.c: Change membership to I1 for instructions ssnop and
ehb.
2010-05-26 Catherine Moore <clm@codesoucery.com>
Maxim Kuvyrkov <maxim@codesourcery.com>
* gas/mips/set-arch.d: Expect ehb.
2010-05-26 21:49:30 +00:00
dfc8cf43a1
Add SIB.
...
2010-05-26 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (sib): New.
(get_sib): Likewise.
(print_insn): Call get_sib.
OP_E_memory): Use sib.
2010-05-26 16:08:23 +00:00
f79e2745b2
gas/
...
* config/tc-mips.c (is_opcode_valid): Remove expansionp.
(macro_build): Change invocation of is_opcode_valid.
(mips_ip): Likewise.
gas/testsuite/
* gas/mips/mips-no-jalx.l: Delete.
* gas/mips/mips-no-jalx.s: Delete.
* gas/mips/mips-jalx-2.d: New.
* gas/mips/mips-jalx-2.s: New.
* gas/mips/mips.exp (mips-jalx-2): Run new test.
(mips-no-jalx): Remove deleted test.
include/
* opcode/mips.h (INSN_MIPS16): Remove.
opcodes/
* mips-dis.c (mips_arch): Remove INSN_MIPS16.
* mips-opc.c (I16): Remove.
(mips_builtin_op): Reclassify jalx.
2010-05-26 12:59:56 +00:00
51b5d4a8c5
* ppc-opc.c (powerpc_opcodes): Enable divdeu, devweu, divde,
...
divwe, divdeuo, divweuo, divdeo, divweo for A2. Add icswepx.
2010-05-19 03:44:36 +00:00
85d4ac0b3c
Correct wclr encoding.
2010-05-13 06:30:09 +00:00
4547cb569c
2010-05-10 Andrew Stubbs <ams@codesourcery.com>
...
gas/
* config/tc-arm.c (aeabi_set_public_attributes): Set Tag_DIV_use.
gas/testsuite/
* gas/arm/attr-cpu-directive.d: Add Tag_DIV_use.
* gas/arm/attr-default.d: Likewise.
* gas/arm/attr-march-armv1.d: Likewise.
* gas/arm/attr-march-armv2.d: Likewise.
* gas/arm/attr-march-armv2a.d: Likewise.
* gas/arm/attr-march-armv2s.d: Likewise.
* gas/arm/attr-march-armv3.d: Likewise.
* gas/arm/attr-march-armv3m.d: Likewise.
* gas/arm/attr-march-armv4.d: Likewise.
* gas/arm/attr-march-armv4t.d: Likewise.
* gas/arm/attr-march-armv4txm.d: Likewise.
* gas/arm/attr-march-armv4xm.d: Likewise.
* gas/arm/attr-march-armv5.d: Likewise.
* gas/arm/attr-march-armv5t.d: Likewise.
* gas/arm/attr-march-armv5te.d: Likewise.
* gas/arm/attr-march-armv5tej.d: Likewise.
* gas/arm/attr-march-armv5texp.d: Likewise.
* gas/arm/attr-march-armv5txm.d: Likewise.
* gas/arm/attr-march-armv6-m.d: Likewise.
* gas/arm/attr-march-armv6.d: Likewise.
* gas/arm/attr-march-armv6j.d: Likewise.
* gas/arm/attr-march-armv6k.d: Likewise.
* gas/arm/attr-march-armv6kt2.d: Likewise.
* gas/arm/attr-march-armv6t2.d: Likewise.
* gas/arm/attr-march-armv6z.d: Likewise.
* gas/arm/attr-march-armv6zk.d: Likewise.
* gas/arm/attr-march-armv6zkt2.d: Likewise.
* gas/arm/attr-march-armv6zt2.d: Likewise.
* gas/arm/attr-march-armv7-a.d: Likewise.
* gas/arm/attr-march-armv7.d: Likewise.
* gas/arm/attr-march-armv7a.d: Likewise.
* gas/arm/attr-march-iwmmxt.d: Likewise.
* gas/arm/attr-march-iwmmxt2.d: Likewise.
* gas/arm/attr-march-marvell-f.d: Likewise.
* gas/arm/attr-march-xscale.d: Likewise.
* gas/arm/attr-mcpu.d: Likewise.
* gas/arm/attr-mfpu-arm1020e.d: Likewise.
* gas/arm/attr-mfpu-arm1020t.d: Likewise.
* gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
* gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
* gas/arm/attr-mfpu-arm7500fe.d: Likewise.
* gas/arm/attr-mfpu-fpa.d: Likewise.
* gas/arm/attr-mfpu-fpa10.d: Likewise.
* gas/arm/attr-mfpu-fpa11.d: Likewise.
* gas/arm/attr-mfpu-fpe.d: Likewise.
* gas/arm/attr-mfpu-fpe2.d: Likewise.
* gas/arm/attr-mfpu-fpe3.d: Likewise.
* gas/arm/attr-mfpu-maverick.d: Likewise.
* gas/arm/attr-mfpu-neon-fp16.d: Likewise.
* gas/arm/attr-mfpu-neon.d: Likewise.
* gas/arm/attr-mfpu-softfpa.d: Likewise.
* gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
* gas/arm/attr-mfpu-softvfp.d: Likewise.
* gas/arm/attr-mfpu-vfp.d: Likewise.
* gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
* gas/arm/attr-mfpu-vfp10.d: Likewise.
* gas/arm/attr-mfpu-vfp3.d: Likewise.
* gas/arm/attr-mfpu-vfp9.d: Likewise.
* gas/arm/attr-mfpu-vfpv2.d: Likewise.
* gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
* gas/arm/attr-mfpu-vfpv3.d: Likewise.
* gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
* gas/arm/attr-mfpu-vfpv4.d: Likewise.
* gas/arm/attr-mfpu-vfpxd.d: Likewise.
* gas/arm/attr-order.d: Likewise.
* gas/arm/attr-override-cpu-directive.d: Likewise.
* gas/arm/attr-override-mcpu.d: Likewise.
* gas/arm/eabi_attr_1.d: Likewise.
ld/testsuite/
* ld-arm/attr-merge-2.attr: Add Tag_DIV_use.
* ld-arm/attr-merge-2a.s: Likewise.
* ld-arm/attr-merge-2b.s: Likewise.
* ld-arm/attr-merge-3a.s: Likewise.
* ld-arm/attr-merge-3b.s: Likewise.
* ld-arm/attr-merge-4.attr: Likewise.
* ld-arm/attr-merge-5.attr: Likewise.
* ld-arm/attr-merge-6.attr: Likewise.
* ld-arm/attr-merge-7.attr: Likewise.
* ld-arm/attr-merge-arch-1.attr: Likewise.
* ld-arm/attr-merge-arch-2.attr: Likewise.
* ld-arm/attr-merge-unknown-2.d: Likewise.
* ld-arm/attr-merge-unknown-2r.d: Likewise.
* ld-arm/attr-merge-unknown-3.d: Likewise.
* ld-arm/attr-merge-vfp-1.d: Likewise.
* ld-arm/attr-merge-vfp-1r.d: Likewise.
* ld-arm/attr-merge-vfp-2.d: Likewise.
* ld-arm/attr-merge-vfp-2r.d: Likewise.
* ld-arm/attr-merge-vfp-3.d: Likewise.
* ld-arm/attr-merge-vfp-3r.d: Likewise.
* ld-arm/attr-merge-vfp-4.d: Likewise.
* ld-arm/attr-merge-vfp-4r.d: Likewise.
* ld-arm/attr-merge-vfp-5.d: Likewise.
* ld-arm/attr-merge-vfp-5r.d: Likewise.
* ld-arm/attr-merge-wchar-00-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-00.d: Likewise.
* ld-arm/attr-merge-wchar-02-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-02.d: Likewise.
* ld-arm/attr-merge-wchar-04-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-04.d: Likewise.
* ld-arm/attr-merge-wchar-20-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-20.d: Likewise.
* ld-arm/attr-merge-wchar-22-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-22.d: Likewise.
* ld-arm/attr-merge-wchar-24-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-40-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-40.d: Likewise.
* ld-arm/attr-merge-wchar-42-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-44-nowarn.d: Likewise.
* ld-arm/attr-merge-wchar-44.d: Likewise.
* ld-arm/attr-merge.attr: Likewise.
2010-04-07 Jie Zhang <jie@codesourcery.com>
gas/
* config/tc-arm.c (aeabi_set_public_attributes): Set
Tag_ABI_HardFP_use to 1 if a single precision FPU is selected.
gas/testsuite/
* gas/arm/attr-mfpu-vfpxd.d: New test.
bfd/
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Merge
Tag_ABI_HardFP_use correctly.
ld/testsuite/
* ld-arm/attr-merge-vfp-6.d: New test.
* ld-arm/attr-merge-vfp-6r.d: New test.
* ld-arm/attr-merge-vfpv3xd.s: New test.
* ld-arm/arm-elf.exp: Add attr-merge-vfp-6 and attr-merge-vfp-6r.
2010-05-11 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
* arm-dis.c (thumb_opcodes): Update ldmia entry to use new %W
format.
(print_insn_thumb16): Add support for new %W format.
* gas/arm/thumb32.d: Fix expected disassembly of ldmia
instruction.
2010-05-11 17:36:33 +00:00
6540b386f0
bfd/
...
2010-05-07 Tristan Gingold <gingold@adacore.com>
* Makefile.in: Regenerate with automake 1.11.1.
* aclocal.m4: Ditto.
bfd/doc/
2010-05-07 Tristan Gingold <gingold@adacore.com>
* Makefile.in: Regenerate with automake 1.11.1.
binutils/
2010-05-07 Tristan Gingold <gingold@adacore.com>
* Makefile.in: Regenerate with automake 1.11.1.
* aclocal.m4: Ditto.
* doc/Makefile.in: Ditto.
gas/
2010-05-07 Tristan Gingold <gingold@adacore.com>
* Makefile.in: Regenerate with automake 1.11.1.
* aclocal.m4: Ditto.
* doc/Makefile.in: Ditto.
gprof/
2010-05-07 Tristan Gingold <gingold@adacore.com>
* Makefile.in: Regenerate with automake 1.11.1.
* aclocal.m4: Ditto.
ld/
2010-05-07 Tristan Gingold <gingold@adacore.com>
* Makefile.in: Regenerate with automake 1.11.1.
* aclocal.m4: Ditto.
opcodes/
2010-05-07 Tristan Gingold <gingold@adacore.com>
* Makefile.in: Regenerate with automake 1.11.1.
* aclocal.m4: Ditto.
2010-05-07 12:28:50 +00:00
3e01a7fd46
Updated Spanish translations.
2010-05-05 15:28:26 +00:00
9c9c98a59d
Updated translation templates.
...
Updated Bulgarian translation.
Updated Finnish translations.
Updated French translations.
Updated Vietnamese translations.
2010-04-22 14:37:16 +00:00
9e3223abf4
Remove extra breack.
2010-04-16 21:37:08 +00:00
f07af43e36
Return bad_opcode on unknown bits in opcode.
...
2010-04-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (get_valid_dis386): Return bad_opcode on unknown
bits in opcode.
2010-04-16 21:35:24 +00:00
3d540e936b
bfd/ChangeLog
...
2010-04-09 Nick Clifton <nickc@redhat.com>
* aoutx.h (aout_link_input_bfd): Remove unused variable sym_count.
* elf-eh-frame.c (_bfd_elf_eh_frame_section_offset): Remove unused
variables htab and hdr_info and mark info parameter as unused.
* elf.c (prep_headers): Remove unused variable i_phdrp.
(_bfd_elf_write_object_contents): Remove unused variable i_ehdrp.
* elf32-i386.c (elf_i386_relocate_section): Mark variabled warned
as unused.
* peXXigen.c (pe_print_reloc): Remove unused variable datasize.
* verilog.c (verilog_write_section): Remove unused variable
address.
binutils/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* dwarf.c (process_debug_info): Remove unused variable
cu_abbrev_offset_ptr.
(display_debug_lines_decoded): Remove unused variable prev_line.
* elfedit.c (process_archive): Remove unused variable
file_name_size.
* ieee.c (ieee_start_compilation_unit): Remove unused variable
nindx.
(ieee_set_type): Remove unused variables info, targetindx and
baseindx.
* objdump.c (disassmble_byte): Remove unused variable done_dot.
* rddbg.c (read_section_stabs_debugging_info): Remove unused
variable other.
* readelf.c (dump_section_as_strings): Remove unused variable
addr.
(process_archive): Remove unused variable file_name_size.
* stabs.c (parse_stab_string): Mark desc parameter as unused.
Remove unused variable lineno.
(parse_stab_struct_type): Remove unused variable orig.
(stab_demangle_type): Remove unused variables constp, volatilep
and hold.
gas/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* as.c (create_obj_attrs_section): Remove unused variable addr.
* listing.c (listing_listing): Remove unused variable message.
* read.c: Remove unnecessary register type qualifiers.
(s_mri): Only define/use old_flag variable if MRI_MODE_CHANGE is
defined.
ld/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* ldlang.c (wild_sort): Remove unused variable section_name.
opcodes/ChangeLog
2010-04-09 Nick Clifton <nickc@redhat.com>
* i386-dis.c (print_insn): Remove unused variable op.
(OP_sI): Remove unused variable mask.
2010-04-09 14:40:18 +00:00
397841b5ae
* configure: Regenerate.
2010-04-07 07:20:51 +00:00
cee62821d4
opcodes/
...
* ppc-opc.c (RBOPT): New define.
("dccci"): Enable for PPCA2. Make operands optional.
("iccci"): Likewise. Do not deprecate for PPC476.
gas/testsuite/
* gas/ppc/476.d ("dccci", "dci", "iccci"): Add tests.
* gas/ppc/476.s: Likewise.
* gas/ppc/a2.d ("dccci", "dci", "iccci", "ici"): Add tests.
* gas/ppc/a2.s: Likewise.
2010-04-06 16:04:34 +00:00
accf44633e
* cr16-opc.c (cr16_instruction): Fix typo in comment.
2010-04-06 15:41:43 +00:00
40b365969f
bfd:
...
* Makefile.am (ALL_MACHINES): Add cpu-tic6x.lo.
(ALL_MACHINES_CFILES): Add cpu-tic6x.c.
(BFD32_BACKENDS): Add elf32-tic6x.lo.
(BFD32_BACKENDS_CFILES): Add elf32-tic6x.c.
* Makefile.in: Regenerate.
* archures.c (bfd_arch_tic6x, bfd_tic6x_arch): New.
(bfd_archures_list): Update.
* config.bfd (tic6x-*-elf): New.
* configure.in (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec):
New.
* configure: Regenerate.
* cpu-tic6x.c, elf32-tic6x.c: New.
* reloc.c (BFD_RELOC_C6000_PCR_S21, BFD_RELOC_C6000_PCR_S12,
BFD_RELOC_C6000_PCR_S10, BFD_RELOC_C6000_PCR_S7,
BFD_RELOC_C6000_ABS_S16, BFD_RELOC_C6000_ABS_L16,
BFD_RELOC_C6000_ABS_H16, BFD_RELOC_C6000_SBR_U15_B,
BFD_RELOC_C6000_SBR_U15_H, BFD_RELOC_C6000_SBR_U15_W,
BFD_RELOC_C6000_SBR_S16, BFD_RELOC_C6000_SBR_L16_B,
BFD_RELOC_C6000_SBR_L16_H, BFD_RELOC_C6000_SBR_L16_W,
BFD_RELOC_C6000_SBR_H16_B, BFD_RELOC_C6000_SBR_H16_H,
BFD_RELOC_C6000_SBR_H16_W, BFD_RELOC_C6000_SBR_GOT_U15_W,
BFD_RELOC_C6000_SBR_GOT_L16_W, BFD_RELOC_C6000_SBR_GOT_H16_W,
BFD_RELOC_C6000_DSBT_INDEX, BFD_RELOC_C6000_PREL31,
BFD_RELOC_C6000_COPY, BFD_RELOC_C6000_ALIGN,
BFD_RELOC_C6000_FPHEAD, BFD_RELOC_C6000_NOCMP): New.
* targets.c (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New.
(_bfd_target_vector): Update.
* bfd-in2.h, libbfd.h: Regenerate.
binutils:
* MAINTAINERS: Add self as TI C6X maintainer.
* NEWS: Add news entry for TI C6X support.
* readelf.c: Include elf/tic6x.h.
(guess_is_rela): Handle EM_TI_C6000.
(dump_relocations): Likewise.
(get_tic6x_dynamic_type): New.
(get_dynamic_type): Call it.
(get_machine_flags): Handle EF_C6000_REL.
(get_osabi_name): Handle machine-specific values only for relevant
machines. Handle C6X values.
(get_tic6x_segment_type): New.
(get_segment_type): Call it.
(get_tic6x_section_type_name): New.
(get_section_type_name): Call it.
(is_32bit_abs_reloc, is_16bit_abs_reloc, is_none_reloc): Handle
EM_TI_C6000.
gas:
* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c.
(TARGET_CPU_HFILES): Add config/tc-tic6x.h.
* Makefile.in: Regenerate.
* NEWS: Add news entry for TI C6X support.
* app.c (do_scrub_chars): Handle "||^" for TI C6X. Handle
TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR. Keep spaces in
operands if TC_KEEP_OPERAND_SPACES.
* configure.tgt (tic6x-*-*): New.
* config/tc-ia64.h (TC_PREDICATE_START_CHAR,
TC_PREDICATE_END_CHAR): Define.
* config/tc-tic6x.c, config/tc-tic6x.h: New.
* doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi.
* doc/Makefile.in: Regenerate.
* doc/all.texi (TIC6X): Define.
* doc/as.texinfo: Add TI C6X documentation. Include c-tic6x.texi.
* doc/c-tic6x.texi: New.
gas/testsuite:
* gas/tic6x: New directory and testcases.
include:
* dis-asm.h (print_insn_tic6x): Declare.
include/elf:
* common.h (ELFOSABI_C6000_ELFABI, ELFOSABI_C6000_LINUX): Define.
* tic6x.h: New.
include/opcode:
* tic6x-control-registers.h, tic6x-insn-formats.h,
tic6x-opcode-table.h, tic6x.h: New.
ld:
* Makefile.am (ALL_EMULATIONS): Add eelf32_tic6x_be.o and
eelf32_tic6x_le.o.
(eelf32_tic6x_be.c, eelf32_tic6x_le.c): New.
* NEWS: Add news entry for TI C6X support.
* configure.tgt (tic6x-*-*): New.
* emulparams/elf32_tic6x_be.sh, emulparams/elf32_tic6x_le.sh: New.
ld/testsuite:
* ld-elf/flags1.d, ld-elf/merge.d: XFAIL for tic6x-*-*.
* ld-elf/sec-to-seg.exp: Set B_test_same_seg to 0 for tic6x-*-*.
* ld-tic6x: New directory and testcases.
opcodes:
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c.
* Makefile.in: Regenerate.
* configure.in (bfd_tic6x_arch): New.
* configure: Regenerate.
* disassemble.c (ARCH_tic6x): Define if ARCH_all.
(disassembler): Handle TI C6X.
* tic6x-dis.c: New.
2010-03-25 21:12:36 +00:00
1985c81cf5
Blackfin disassmbler: fix typo where M2.H was decoded as L2.H
2010-03-24 05:16:29 +00:00
f66187fdfe
* dis-buf.c (buffer_read_memory): Give error for reading just
...
before the start of memory.
2010-03-23 15:59:45 +00:00
ce7d077ec0
2010-03-22 Sebastian Pop <sebastian.pop@amd.com>
...
Quentin Neill <quentin.neill@amd.com>
opcodes/
* i386-dis.c (OP_LWP_I): Removed.
(reg_table): Do not use OP_LWP_I, use Iq.
(OP_LWPCB_E): Remove use of names16.
(OP_LWP_E): Same.
* i386-opc.tbl: Removed 16bit LWP insns. 32bit LWP insns
should not set the Vex.length bit.
* i386-tbl.h: Regenerated.
gas/
* testsuite/gas/i386/x86-64-lwp.s: Remove use of 16bit LWP insns.
* testsuite/gas/i386/lwp.s: Same.
* testsuite/gas/i386/x86-64-lwp.d: Updated.
* testsuite/gas/i386/lwp.d: Updated.
2010-03-23 02:56:24 +00:00
63d0fa4e9e
* ppc-dis.c (ppc_opts): Add PPC_OPCODE_E500MC for "e500mc64".
2010-02-25 01:00:13 +00:00
c060226ad0
PR binutils/6773
...
* arm-dis.c (arm_opcodes): Replace <prefix>addsubx with
<prefix>asx. Replace <prefix>subaddx with <prefix>sax.
(thumb32_opcodes): Likewise.
* gas/arm/arch7em.d: Replace expected disassembly of
<prefix>addsubx with <prefix>asx. Also replace <prefix>subaddx
with <prefix>sax.
* gas/arm/archv6.d: Likewise.
* gas/arm/thumb32.d: Likewise.
2010-02-24 15:11:44 +00:00
ab7875de80
Updated Vietnamese translation.
2010-02-15 10:09:39 +00:00
fee1d3e815
* lm32-opinst.c: Regenerate.
2010-02-13 04:38:57 +00:00
9468ae8905
* cgen-dis.in (print_normal): Delete CGEN_PRINT_NORMAL.
...
(print_address): Delete CGEN_PRINT_ADDRESS.
* fr30-dis.c, * frv-dis.c, * ip2k-dis.c, * iq2000-dis.c,
* lm32-dis.c, * m32c-dis.c, * m32r-desc.c, * m32r-desc.h,
* m32r-dis.c, * mep-dis.c, * mt-dis.c, * openrisc-dis.c,
* xc16x-dis.c, * xstormy16-dis.c: Regenerate.
2010-02-12 04:42:28 +00:00
37ec92403b
* fr30-desc.c, * fr30-desc.h, * fr30-opc.c,
...
* frv-desc.c, * frv-desc.h, * frv-opc.c,
* ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c,
* iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c,
* lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opinst.c,
* m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
* m32r-desc.c, * m32r-desc.h, * m32r-opc.c, * m32r-opinst.c,
* mep-desc.c, * mep-desc.h, * mep-opc.c,
* mt-desc.c, * mt-desc.h, * mt-opc.c,
* openrisc-desc.c, * openrisc-desc.h, * openrisc-opc.c,
* xc16x-desc.c, * xc16x-desc.h, * xc16x-opc.c,
* xstormy16-desc.c, * xstormy16-desc.h, * xstormy16-opc.c: Regenerate.
2010-02-12 03:25:49 +00:00
c75ef631bd
Update copyright.
...
gas/
2010-02-11 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c: Update copyright.
opcodes/
2010-02-11 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c: Update copyright.
* i386-gen.c: Likewise.
* i386-opc.h: Likewise.
* i386-opc.tbl: Likewise.
2010-02-11 13:41:19 +00:00
a683cc34e4
2010-02-10 Quentin Neill <quentin.neill@amd.com>
...
Sebastian Pop <sebastian.pop@amd.com>
gas:
* config/tc-i386.c (vec_imm4) New operand type.
(fits_in_imm4): New.
(VEX_check_operands): New.
(check_reverse): Call VEX_check_operands.
(build_modrm_byte): Reintroduce code for 5
operand insns. Fix whitespace.
gas/testsuite:
* gas/i386/x86-64-xop.d: Add vpermil2p[sd] tests.
* gas/i386/x86-64-xop.s: Likewise.
* gas/i386/xop.d: Likewise.
* gas/i386/xop.s: Likewise.
opcodes:
* i386-dis.c (OP_EX_VexImmW): Reintroduced
function to handle 5th imm8 operand.
(PREFIX_VEX_3A48): Added.
(PREFIX_VEX_3A49): Added.
(VEX_W_3A48_P_2): Added.
(VEX_W_3A49_P_2): Added.
(prefix table): Added entries for PREFIX_VEX_3A48
and PREFIX_VEX_3A49.
(vex table): Added entries for VEX_W_3A48_P_2 and
and VEX_W_3A49_P_2.
* i386-gen.c (operand_type_init): Added OPERAND_TYPE_VEC_IMM4
for Vec_Imm4 operands.
* i386-opc.h (enum): Added Vec_Imm4.
(i386_operand_type): Added vec_imm4.
* i386-opc.tbl: Add entries for vpermilp[ds].
* i386-init.h: Regenerated.
* i386-tbl.h: Regenerated.
2010-02-11 05:06:14 +00:00
cdc51b0748
gas/
...
* config/tc-ppc.c (md_show_usage): Add -mpwr4, -mpwr5, -mpwr5x,
-mpwr6 and -mpwr7.
opcodes/
* ppc-dis.c (ppc_opts): Add "pwr4", "pwr5", "pwr5x", "pwr6"
and "pwr7". Move "a2" into alphabetical order.
2010-02-10 19:59:07 +00:00
ce3d2015b2
include/
...
* opcode/ppc.h (PPC_OPCODE_TITAN): Define.
bfd/
* archures.c (bfd_mach_ppc_titan): Define.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add titan entry.
opcodes/
* ppc-dis.c (ppc_opts): Add titan entry.
* ppc-opc.c (TITAN, MULHW): Define.
(powerpc_opcodes): Support AppliedMicro Titan core (APM83xxx).
gas/
* config/tc-ppc.c (md_show_usage): Mention -mtitan. Don't use tabs.
(ppc_mach): Handle titan.
* doc/c-ppc.texi: Mention -mtitan.
gas/testsuite/
* gas/ppc/titan.d, * gas/ppc/titan.s: New test.
* gas/ppc/ppc.exp: Run it.
2010-02-08 01:59:38 +00:00
68339fdf88
2010-02-03 Quentin Neill <quentin.neill@amd.com>
...
gas/
* config/tc-i386.c (cpu_arch): Change amdfam15 to bdver1.
(i386_align_code): Rename PROCESSOR_AMDFAM15 to PROCESSOR_BDVER1.
* config/tc-i386.h (processor_type): Same.
* doc/c-i386.texi: Change amdfam15 to bdver1.
opcodes/
* i386-gen.c (cpu_flag_init): Rename CPU_AMDFAM15_FLAGS
to CPU_BDVER1_FLAGS
* i386-init.h: Regenerated.
testsuite/
* gas/i386/i386.exp: Rename amdfam15 test cases to bdver1.
* gas/i386/x86-64-nops-1-amdfam15.d: Renamed test case to
gas/i386/x86-64-nops-1-bdver1.d.
* gas/i386/nops-1-amdfam15.d: Renamed test case to
gas/i386/nops-1-bdver1.d.
2010-02-03 20:36:14 +00:00
f3d55a94f3
Move NOP from 0x00 to 0x0f.
2010-02-03 12:47:06 +00:00
b0e28b39b7
gas/testsuite/
...
* gas/arm/dis-data.d: Update test name. Do not expect
.word output.
* gas/arm/dis-data2.d, gas/arm/dis-data2.s,
gas/arm/dis-data3.d, gas/arm/dis-data3.s: New tests.
opcodes/
* opcodes/arm-dis.c (struct arm_private_data): New.
(print_insn_coprocessor, print_insn_arm): Update to use struct
arm_private_data.
(is_mapping_symbol, get_map_sym_type): New functions.
(get_sym_code_type): Check the symbol's section. Do not check
mapping symbols.
(print_insn): Default to disassembling ARM mode code. Check
for mapping symbols separately from other symbols. Use
struct arm_private_data.
2010-01-29 16:47:55 +00:00
1c4809636b
Allow VL=1 on scalar FMA instructions.
...
gas/testsuite/
2010-01-28 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/fma-scalar-intel.d: New.
* gas/i386/fma-scalar.d: Likewise.
* gas/i386/fma-scalar.s: Likewise.
* gas/i386/x86-64-fma-scalar-intel.d: Likewise.
* gas/i386/x86-64-fma-scalar.d: Likewise.
* gas/i386/x86-64-fma-scalar.s: Likewise.
* gas/i386/i386.exp: Run fma-scalar, fma-scalar-intel,
x86-64-fma-scalar and x86-64-fma-scalar-intel.
opcodes/
2010-01-28 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (EXVexWdqScalar): New.
(vex_scalar_w_dq_mode): Likewise.
(prefix_table): Update entries for PREFIX_VEX_3899,
PREFIX_VEX_389B, PREFIX_VEX_389D, PREFIX_VEX_389F,
PREFIX_VEX_38A9, PREFIX_VEX_38AB, PREFIX_VEX_38AD,
PREFIX_VEX_38AF, PREFIX_VEX_38B9, PREFIX_VEX_38BB,
PREFIX_VEX_38BD and PREFIX_VEX_38BF.
(intel_operand_size): Handle vex_scalar_w_dq_mode.
(OP_EX): Likewise.
2010-01-28 15:33:23 +00:00
539f890d01
Allow VL=1 on AVX scalar instructions.
...
gas/
2010-01-27 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (avxscalar): New.
(OPTION_MAVXSCALAR): Likewise.
(build_vex_prefix): Select vector_length for scalar instructions
based on avxscalar.
(md_longopts): Add OPTION_MAVXSCALAR.
(md_parse_option): Handle OPTION_MAVXSCALAR.
(md_show_usage): Add -mavxscalar=.
* doc/c-i386.texi: Document -mavxscalar=.
gas/testsuite/
2010-01-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/avx-scalar-intel.d: New.
* gas/i386/avx-scalar.d: Likewise.
* gas/i386/avx-scalar.s: Likewise.
* gas/i386/x86-64-avx-scalar-intel.d: Likewise.
* gas/i386/x86-64-avx-scalar.d: Likewise.
* gas/i386/x86-64-avx-scalar.s: Likewise.
* gas/i386/i386.exp: Run avx-scalar, avx-scalar-intel,
x86-64-avx-scalar and x86-64-avx-scalar-intel.
opcodes/
2010-01-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (XMScalar): New.
(EXdScalar): Likewise.
(EXqScalar): Likewise.
(EXqScalarS): Likewise.
(VexScalar): Likewise.
(EXdVexScalarS): Likewise.
(EXqVexScalarS): Likewise.
(XMVexScalar): Likewise.
(scalar_mode): Likewise.
(d_scalar_mode): Likewise.
(d_scalar_swap_mode): Likewise.
(q_scalar_mode): Likewise.
(q_scalar_swap_mode): Likewise.
(vex_scalar_mode): Likewise.
(vex_len_table): Duplcate entries for VEX_LEN_10_P_1,
VEX_LEN_10_P_3, VEX_LEN_11_P_1, VEX_LEN_11_P_3, VEX_LEN_2A_P_1,
VEX_LEN_2A_P_3, VEX_LEN_2C_P_3, VEX_LEN_2D_P_1, VEX_LEN_2E_P_0,
VEX_LEN_2E_P_2, VEX_LEN_2F_P_2, VEX_LEN_51_P_1, VEX_LEN_51_P_3,
VEX_LEN_52_P_1, VEX_LEN_53_P_1, VEX_LEN_58_P_1, VEX_LEN_58_P_3,
VEX_LEN_59_P_1, VEX_LEN_5A_P_1, VEX_LEN_5A_P_3, VEX_LEN_5C_P_1,
VEX_LEN_5C_P_3, VEX_LEN_5D_P_1, VEX_LEN_5D_P_3, VEX_LEN_5E_P_1,
VEX_LEN_5E_P_3, VEX_LEN_5F_P_1, VEX_LEN_5F_P_3, VEX_LEN_6E_P_2,
VEX_LEN_7E_P_1, VEX_LEN_7E_P_2, VEX_LEN_D6_P_2, VEX_LEN_C2_P_1,
VEX_LEN_C2_P_3, VEX_LEN_3A0A_P_2 and VEX_LEN_3A0B_P_2.
(vex_w_table): Update entries for VEX_W_10_P_1, VEX_W_10_P_3,
VEX_W_11_P_1, VEX_W_11_P_3, VEX_W_2E_P_0, VEX_W_2E_P_2,
VEX_W_2F_P_0, VEX_W_2F_P_2, VEX_W_51_P_1, VEX_W_51_P_3,
VEX_W_52_P_1, VEX_W_53_P_1, VEX_W_58_P_1, VEX_W_58_P_3,
VEX_W_59_P_1, VEX_W_59_P_3, VEX_W_5A_P_1, VEX_W_5A_P_3,
VEX_W_5C_P_1, VEX_W_5C_P_3, VEX_W_5D_P_1, VEX_W_5D_P_3,
VEX_W_5E_P_1, VEX_W_5E_P_3, VEX_W_5F_P_1, VEX_W_5F_P_3,
VEX_W_7E_P_1, VEX_W_D6_P_2 VEX_W_C2_P_1, VEX_W_C2_P_3,
VEX_W_3A0A_P_2 and VEX_W_3A0B_P_2.
(intel_operand_size): Handle d_scalar_mode, d_scalar_swap_mode,
q_scalar_mode, q_scalar_swap_mode.
(OP_XMM): Handle scalar_mode.
(OP_EX): Handle d_scalar_mode, d_scalar_swap_mode, q_scalar_mode
and q_scalar_swap_mode.
(OP_VEX): Handle vex_scalar_mode.
2010-01-27 14:34:40 +00:00
208b4d786e
Remove trailing { Bad_Opcode }.
2010-01-24 23:22:43 +00:00
448b213a86
Remove trailing { Bad_Opcode } in vex_len_table.
...
2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (vex_len_table): Remove trailing { Bad_Opcode }.
2010-01-24 21:35:13 +00:00
47cf8fa043
Remove trailing { Bad_Opcode }.
...
2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (prefix_table): Remove trailing { Bad_Opcode }.
2010-01-24 20:39:40 +00:00
592d1631a4
Remove trailing "(bad)" entries and replace { "(bad)", { XX } }
...
with { Bad_Opcode }.
2010-01-24 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (Bad_Opcode): New.
(bad_opcode): Likewise.
(dis386): Replace { "(bad)", { XX } } with { Bad_Opcode }.
(dis386_twobyte): Likewise.
(reg_table): Likewise.
(prefix_table): Likewise.
(x86_64_table): Likewise.
(vex_len_table): Likewise.
(vex_w_table): Likewise.
(mod_table): Likewise.
(rm_table): Likewise.
(float_reg): Likewise.
(reg_table): Remove trailing "(bad)" entries.
(prefix_table): Likewise.
(x86_64_table): Likewise.
(vex_len_table): Likewise.
(vex_w_table): Likewise.
(mod_table): Likewise.
(rm_table): Likewise.
(get_valid_dis386): Handle bytemode 0.
2010-01-24 18:24:23 +00:00
712366da0a
Replace "Vex" with "Vex=3" on AVX scalar instructions.
...
2010-01-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h (VEXScalar): New.
* i386-opc.tbl: Replace "Vex" with "Vex=3" on AVX scalar
instructions.
* i386-tbl.h: Regenerated.
2010-01-24 00:59:13 +00:00
706e820514
Correct month.
2010-01-21 17:32:32 +00:00
73bb672904
Add xsave64 and xrstor64.
...
gas/testsuite/
2010-02-21 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/x86-64-xsave.s: Add tests for xsave64 and xrstor64.
* gas/i386/x86-64-xsave-intel.d: Updated.
* gas/i386/x86-64-xsave.d: Likewise.
opcodes/
2010-02-21 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (mod_table): Use FXSAVE on xsave and xrstor.
* i386-opc.tbl: Add xsave64 and xrstor64.
* i386-tbl.h: Regenerated.
2010-01-21 17:30:14 +00:00
99ea83aac3
PR 11170
...
* arm-dis.c (print_arm_address): Do not ignore negative bit in PC
based post-indexed addressing.
2010-01-20 10:54:03 +00:00
a6461c0251
2010-01-15 Sebastian Pop <sebastian.pop@amd.com>
...
gas/
* config/tc-i386.c (md_assemble): Before accessing the IMM field
check that it's not an XOP insn.
gas/testsuite/
* gas/i386/x86-64-xop.d: Add missing patterns.
* gas/i386/x86-64-xop.s: Same.
* gas/i386/xop.d: Same.
* gas/i386/xop.s: Same.
opcodes/
* i386-opc.tbl: Support all the possible aliases for VPCOM* insns.
* i386-tbl.h: Regenerated.
2010-01-15 21:24:13 +00:00
a2a7d12cfc
Replace VEX.DNS with VEX.NDS in comments.
...
2010-01-14 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h (VexVVVV): Replace VEX.DNS with VEX.NDS in
comments.
2010-01-14 19:35:36 +00:00
b9733481ab
Add names_mm, names_xmm and names_ymm.
...
2010-01-14 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (names_mm): New.
(intel_names_mm): Likewise.
(att_names_mm): Likewise.
(names_xmm): Likewise.
(intel_names_xmm): Likewise.
(att_names_xmm): Likewise.
(names_ymm): Likewise.
(intel_names_ymm): Likewise.
(att_names_ymm): Likewise.
(print_insn): Set names_mm, names_xmm and names_ymm.
(OP_MMX): Use names_mm, names_xmm and names_ymm.
(OP_XMM): Likewise.
(OP_EM): Likewise.
(OP_EMC): Likewise.
(OP_MXC): Likewise.
(OP_EX): Likewise.
(XMM_Fixup): Likewise.
(OP_VEX): Likewise.
(OP_EX_VexReg): Likewise.
(OP_Vex_2src): Likewise.
(OP_Vex_2src_1): Likewise.
(OP_Vex_2src_2): Likewise.
(OP_REG_VexI4): Likewise.
2010-01-14 17:29:18 +00:00
5e6718e49c
Update comments
...
2010-01-13 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (print_insn): Update comments.
2010-01-13 16:06:12 +00:00
d869730db3
Remove rex_original
...
2010-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (rex_original): Removed.
(ckprefix): Remove rex_original.
(print_insn): Update comments.
2010-01-13 04:03:20 +00:00
3725885a65
Sync Libtool from GCC.
...
/:
* libtool.m4: Sync from git Libtool.
* ltmain.sh: Likewise.
* ltoptions.m4: Likewise.
* ltversion.m4: Likewise.
* lt~obsolete.m4: Likewise.
sim/iq2000/:
* configure: Regenerate.
sim/d10v/:
* configure: Regenerate.
sim/m32r/:
* configure: Regenerate.
sim/frv/:
* configure: Regenerate.
sim/:
* avr/configure: Regenerate.
* cris/configure: Regenerate.
* microblaze/configure: Regenerate.
sim/h8300/:
* configure: Regenerate.
sim/mn10300/:
* configure: Regenerate.
sim/erc32/:
* configure: Regenerate.
sim/arm/:
* configure: Regenerate.
sim/m68hc11/:
* configure: Regenerate.
sim/lm32/:
* configure: Regenerate.
sim/sh64/:
* configure: Regenerate.
sim/v850/:
* configure: Regenerate.
sim/cr16/:
* configure: Regenerate.
sim/moxie/:
* configure: Regenerate.
sim/m32c/:
* configure: Regenerate.
sim/mips/:
* configure: Regenerate.
sim/mcore/:
* configure: Regenerate.
sim/sh/:
* configure: Regenerate.
gprof/:
* Makefile.in: Regenerate.
* configure: Regenerate.
opcodes/:
* Makefile.in: Regenerate.
* configure: Regenerate.
gas/:
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
ld/:
* configure: Regenerate.
gdb/testsuite/:
* gdb.cell/configure: Regenerate.
binutils/:
* Makefile.in: Regenerate.
* configure: Regenerate.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.in: Regenerate.
* configure: Regenerate.
bfd/doc/:
* Makefile.in: Regenerate.
2010-01-09 21:11:44 +00:00
b7cd1872af
* cgen-ibld.in (insert_normal, extract_normal): Minor cleanup.
...
* fr30-ibld.c, * frv-ibld.c, * ip2k-ibld.c, * iq2000-ibld.c,
* lm32-ibld.c, * m32c-ibld.c, * m32r-ibld.c, * mep-ibld.c,
* mt-ibld.c, * openrisc-ibld.c, * xc16x-ibld.c,
* xstormy16-ibld.c: Regenerate.
2010-01-07 18:05:45 +00:00
69dd98654a
2010-01-06 Quentin Neill <quentin.neill@amd.com>
...
gas/
* config/tc-i386.c (cpu_arch): Add amdfam15.
(i386_align_code): Add PROCESSOR_AMDFAM15 cases.
* config/tc-i386.h (processor_type): Add PROCESSOR_AMDFAM15.
* doc/c-i386.texi: Add amdfam15.
opcodes/
* i386-gen.c (cpu_flag_init): Add new CPU_AMDFAM15_FLAGS.
* i386-init.h: Regenerated.
testsuite/
* gas/i386/i386.exp: Add new amdfam15 test cases.
* gas/i386/nops-1-amdfam15.d: New.
2010-01-06 22:52:47 +00:00
e3e535bc58
* arm-dis.c (print_insn): Fixed search for next
...
symbol and data dumping condition, and the
initial mapping symbol state.
* gas/arm/dis-data.d: New test case.
* gas/arm/dis-data.s: New file.
2010-01-06 15:02:45 +00:00
fe8afbc48f
cpu/
...
* m32c.cpu (f-dsp-32-u24): Fix mode of extract handler.
(f-dsp-40-u20, f-dsp-40-u24): Ditto.
opcodes/
* cgen-ibld.in: #include "cgen/basic-modes.h".
* fr30-ibld.c, * frv-ibld.c, * ip2k-ibld.c, * iq2000-ibld.c,
* lm32-ibld.c, * m32c-ibld.c, * m32r-ibld.c, * mep-ibld.c,
* mt-ibld.c, * openrisc-ibld.c, * xc16x-ibld.c,
* xstormy16-ibld.c: Regenerate.
2010-01-06 05:30:19 +00:00
2edcd24424
PR 11123
...
* arm-dis.c (print_insn_coprocessor): Initialise value.
2010-01-04 10:18:32 +00:00
0dc9305793
bfd/
...
* archures.c: Add bfd_mach_ppc_e500mc64.
* bfd-in2.h: Regenerate.
* cpu-powerpc.c (bfd_powerpc_archs): Add entry for
bfd_mach_ppc_e500mc64.
gas/
* config/tc-ppc.c (md_show_usage): Document -me500mc64.
opcodes/
* ppc-dis.c (ppc_opts): Add entry for "e500mc64".
2010-01-04 02:32:56 +00:00
05994f45db
* cgen-asm.in: Update copyright year.
...
* cgen-dis.in: Update copyright year.
* cgen-ibld.in: Update copyright year.
* fr30-asm.c, * fr30-desc.c, * fr30-desc.h, * fr30-dis.c,
* fr30-ibld.c, * fr30-opc.c, * fr30-opc.h, * frv-asm.c, * frv-desc.c,
* frv-desc.h, * frv-dis.c, * frv-ibld.c, * frv-opc.c, * frv-opc.h,
* ip2k-asm.c, * ip2k-desc.c, * ip2k-desc.h, * ip2k-dis.c,
* ip2k-ibld.c, * ip2k-opc.c, * ip2k-opc.h, * iq2000-asm.c,
* iq2000-desc.c, * iq2000-desc.h, * iq2000-dis.c, * iq2000-ibld.c,
* iq2000-opc.c, * iq2000-opc.h, * lm32-asm.c, * lm32-desc.c,
* lm32-desc.h, * lm32-dis.c, * lm32-ibld.c, * lm32-opc.c, * lm32-opc.h,
* lm32-opinst.c, * m32c-asm.c, * m32c-desc.c, * m32c-desc.h,
* m32c-dis.c, * m32c-ibld.c, * m32c-opc.c, * m32c-opc.h, * m32r-asm.c,
* m32r-desc.c, * m32r-desc.h, * m32r-dis.c, * m32r-ibld.c,
* m32r-opc.c, * m32r-opc.h, * m32r-opinst.c, * mep-asm.c, * mep-desc.c,
* mep-desc.h, * mep-dis.c, * mep-ibld.c, * mep-opc.c, * mep-opc.h,
* mt-asm.c, * mt-desc.c, * mt-desc.h, * mt-dis.c, * mt-ibld.c,
* mt-opc.c, * mt-opc.h, * openrisc-asm.c, * openrisc-desc.c,
* openrisc-desc.h, * openrisc-dis.c, * openrisc-ibld.c,
* openrisc-opc.c, * openrisc-opc.h, * xc16x-asm.c, * xc16x-desc.c,
* xc16x-desc.h, * xc16x-dis.c, * xc16x-ibld.c, * xc16x-opc.c,
* xc16x-opc.h, * xstormy16-asm.c, * xstormy16-desc.c,
* xstormy16-desc.h, * xstormy16-dis.c, * xstormy16-ibld.c,
* xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
2010-01-02 18:50:59 +00:00
43ecc30f09
Move 2009 binutils ChangeLog to ChangeLog-2009.
2010-01-01 18:06:10 +00:00
2426c15ff8
Replace VexNDS, VexNDD and VexLWP with VexVVVV.
...
gas/
2009-12-19 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_operands): Check vexvvvv instead
of vexnds and vexndd.
(build_modrm_byte): Check vexvvvv instead of vexnds, vexndd
and vexlwp.
opcodes/
2009-12-19 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Remove VexNDS, VexNDD and
VexLWP. Add VexVVVV.
* i386-opc.h (VexNDS): Removed.
(VexNDD): Likewise.
(VexLWP): Likewise.
(VEXXDS): New.
(VEXNDD): Likewise.
(VEXLWP): Likewise.
(VexVVVV): Likewise.
(i386_opcode_modifier): Remove vexnds, vexndd and vexlwp.
Add vexvvvv.
* i386-opc.tbl: Replace VexNDS with VexVVVV=1, VexNDD with
VexVVVV=2 and VexLWP with VexVVVV=3.
* i386-tbl.h: Regenerated.
2009-12-19 18:36:27 +00:00
94ff3a50d8
Move Imm1 before Imm8.
...
2009-12-18 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (operand_types): Move Imm1 before Imm8.
2009-12-18 21:07:58 +00:00
ff4a8d2b93
PR binutils/10924
...
* config/tc-arm.c (do_ldstv4): Do not allow r15 as the destination
register.
(do_mrs): Likewise.
(do_mul): Likewise.
* arm-dis.c: Add support for %<>ru and %<>rU formats to enforce
unique register numbers. Extend support for %<>R format to
thumb32 and coprocessor instructions.
* gas/arm/unpredictable.s: Add more unpredictable instructions.
* gas/arm/unpredictable.d: Add expected disassemblies.
2009-12-17 09:52:18 +00:00
2eb952a4d9
Remove ByteOkIntel.
...
gas/
2009-12-16 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_suffix): Set i.suffix to 0 in
Intel syntax if size is ignored and b/l/w suffixes are
illegal.
(check_byte_reg): Remove byteokintel check.
opcodes/
2009-12-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Remove ByteOkIntel.
* i386-opc.h (ByteOkIntel): Removed.
(i386_opcode_modifier): Remove byteokintel.
* i386-opc.tbl: Remove ByteOkIntel.
* i386-tbl.h: Regenerated.
2009-12-16 20:08:32 +00:00
7f399153c6
Replace Vex0F, Vex0F38, Vex0F3A, XOP08, XOP09 and XOP0A with VexOpcode.
...
gas/
2009-12-16 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (build_vex_prefix): Replace vex0f, vex0f38,
vex0f3a, xop08, xop09 and xop0a with vexopcode.
opcodes/
2009-12-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Remove Vex0F, Vex0F38,
Vex0F3A, XOP08, XOP09 and XOP0A. Add VexOpcode.
* i386-opc.h (Vex0F): Removed.
(Vex0F38): Likewise.
(Vex0F3A): Likewise.
(VexOpcode): New.
(VEX0F): Likewise.
(VEX0F38): Likewise.
(VEX0F3A): Likewise.
(XOP08): Defined as a macro.
(XOP09): Likewise.
(XOP0A): Likewise.
(i386_opcode_modifier): Remove vex0f, vex0f38, vex0f3a, xop08,
xop09 and xop0a. Add vexopcode.
* i386-opc.tbl: Replace Vex0F with VexOpcode=0, Vex0F38 with
VexOpcode=1, Vex0F3A with VexOpcode=2, XOP08 with VexOpcode=3,
XOP09 with VexOpcode=4 and XOP0A with VexOpcode=5.
* i386-tbl.h: Regenerated.
2009-12-16 15:43:16 +00:00
25ac7f26dd
Fix a typo in ChangeLog.
2009-12-16 05:31:40 +00:00
8c43a48b28
Replace VEX2SOURCES with XOP2SOURCES.
...
gas/
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (build_modrm_byte): Check XOP2SOURCES
instead VEX2SOURCES.
opcodes/
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h (VEX2SOURCES): Renamed to ...
(XOP2SOURCES): This.
2009-12-16 05:18:11 +00:00
8cd7925b45
Replace Vex2Sources and Vex3Sources with VexSources.
...
gas/
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (process_operands): Check vexsources
instead of vex3sources.
(build_modrm_byte): Check vexsources instead of vex2sources
and vex3sources.
opcodes/
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Remove Vex3Sources and
Vex2Sources. Add VexSources.
* i386-opc.h ()Vex2Sources: Removed.
(Vex3Sources): Likewise.
(VEX2SOURCES): New.
(VEX3SOURCES): Likewise.
(VexSources): Likewise.
(i386_opcode_modifier): Remove vex2sources and vex3sources.
Add vexsources.
* i386-opc.tbl: Replace Vex2Sources with VexSources=1 and
Vex3Sourceswith VexSources=2.
* i386-tbl.h: Regenerated.
2009-12-16 04:00:35 +00:00
1ef99a7be9
Remove VexW0 and VexW1. Add VexW.
...
gas/
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (build_vex_prefix): Replace vexw0/vexw1
with vexw.
(build_modrm_byte): Likewise.
opcodes/
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Remove VexW0 and VexW1. Add
VexW.
* i386-opc.h (VexW0): Removed.
(VexW1): Likewise.
(VEXW0): New.
(VEXW1): Likewise.
(VexW): Likewise.
(i386_opcode_modifier): Remove vexw0 and vexw1. Add vexw.
* i386-opc.tbl: Replace VexW0 with VexW=1 and VexW1 with
Vex=2.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2009-12-16 02:10:45 +00:00
bcf2684fb0
Add VEX_W_3818_P_2_M_0.
...
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (VEX_W_3818_P_2_M_0): New.
(vex_w_table): Add VEX_W_3818_P_2_M_0.
(mod_table): Use VEX_W_3818_P_2_M_0.
2009-12-15 23:33:51 +00:00
a179a9fdaa
Reformat vex_w_table.
...
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (vex_w_table): Reformat.
2009-12-15 22:20:50 +00:00
53aa04a0be
Add VEX_W_382X_P_2_M_0.
...
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (VEX_W_382X_P_2_M_0): New.
(vex_w_table): Add VEX_W_382X_P_2_M_0.
(mod_table): Use VEX_W_382X_P_2_M_0.
2009-12-15 22:13:05 +00:00
efdb52b70e
Reformat vex_w_table.
...
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (vex_w_table): Reformat.
2009-12-15 21:37:51 +00:00
9e30b8e093
Add USE_VEX_W_TABLE, VEX_W_TABLE and VEX_W_XXX.
...
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (USE_VEX_W_TABLE): New.
(VEX_W_TABLE): Likewise.
(VEX_W_XXX): Likewise.
(vex_w_table): Likewise.
(prefix_table): Use VEX_W_XXX.
(vex_table): Likewise.
(vex_len_table): Likewise.
(mod_table): Likewise.
(get_valid_dis386): Handle USE_VEX_W_TABLE.
* i386-opc.tbl: Add VexW0 to AVX instructions where the VEX.W bit
isn't used.
* i386-tbl.h: Regenerated.
2009-12-15 18:56:09 +00:00
e3c58833bf
Define VEX128 and VEX256.
...
gas/
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (build_vex_prefix): Use VEX256.
opcodes/
2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h (VEX128): New.
(VEX256): Likewise.
2009-12-15 16:36:59 +00:00
4c807e7262
Reformat vex_len_table.
...
2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (vex_len_table): Reformat.
2009-12-15 01:42:57 +00:00
976f1fde11
Rename MOD_VEX_51 to MOD_VEX_50.
...
2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (MOD_VEX_51): Renamed to ...
(MOD_VEX_50): This.
(vex_table): Updated.
(mod_table): Likewise.
2009-12-14 20:22:16 +00:00
ab8e2090b6
PR binutils/10924
...
* arm-dis.c (arm_opcodes): Specify %R in cases where using r15
results in unpredictable behaviour.
(print_insn_arm): Handle %R.
* gas/arm/unpredictable.s: New test case - checks the disassembly
of instructions with unpredictable behaviour.
* gas/arm/unpredictable.d: New file - expected disassembly.
2009-12-14 16:38:23 +00:00
759a05ce24
Set vex.w to 0 for VEX C5 prefix.
...
2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
prefix.
(print_insn): Don't set vex.w here.
2009-12-12 01:17:41 +00:00
5639ff8726
2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
...
* i386-dis.c (print_insn): Set vex.w to 0.
2009-12-12 00:13:11 +00:00
02e647f941
2009-12-11 Quentin Neill <quentin.neill@amd.com>
...
gas/testsuite/
* gas/i386/fma4.d: Add test cases.
* gas/i386/fma4.s: Add test cases.
* gas/i386/x86-64-fma4.d: Add test cases.
* gas/i386/x86-64-fma4.s: Add test cases.
opcodes/
* i386-dis.c (get_vex_imm8): Extend logic to apply in all
cases, to avoid fetching ahead for the immediate bytes when
OP_E_memory has already been called. Fix indentation.
2009-12-11 20:38:51 +00:00
91d6fa6a03
Add -Wshadow to the gcc command line options used when compiling the binutils.
...
Fix up all warnings generated by the addition of this switch.
2009-12-11 13:42:17 +00:00
07a28fab11
PR 10924
...
* arm-dis.c (print_insn_arm): Mark insns that use the PC in
post-indexed addressing as unpredictable.
2009-12-09 08:38:04 +00:00
eacc9c891d
Support fxsave64 and fxrstor64.
...
gas/testsuite/
2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/i386.exp: Run x86-64-fxsave and x86-64-fxsave-intel.
* gas/i386/rex.d: Updated for fxsave64.
* gas/i386/x86-64-fxsave-intel.d: New.
* gas/i386/x86-64-fxsave.d: Likewise.
* gas/i386/x86-64-fxsave.s: Likewise.
opcodes/
2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (FXSAVE_Fixup): New.
(FXSAVE): Likewise.
(mod_table): Use FXSAVE on fxsave and fxrstor.
* i386-opc.tbl: Add fxsave64 and fxrstor64.
* i386-tbl.h: Regenerated.
2009-12-04 07:51:41 +00:00
Andreas Schwab
David S. Miller
Nick Clifton
Maciej W. Rozycki
Quentin Neill
H.J. Lu
Richard Sandiford
Alan Modra
Nathan Sidwell
Andreas Krebbel
DJ Delorie
Julian Brown
Paul Brook
Mike Frysinger
Eric B. Weddington
Ralf Wildenhues
Michael Snyder
Jan Kratochvil
Mingjie Xing
Dave Anglin
Tristan Gingold
Chao-ying Fu
Bernd Schmidt
Pierre Muller
Matthew Gretton-Dann
Nathan Froyd
Richard Earnshaw
Catherine Moore
Peter Bergner
Joseph Myers
Sebastian Pop
Doug Evans
Anthony Green
Daniel Jacobowitz