The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.
bfd/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.
gas/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.
include/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
The .symver directive on common symbol creates a new common symbol,
which shouldn't be allowed, similar to alias on common symbol:
$ cat y.S
.comm bar,8,8
.set bar1,bar
$ as -o y.o y.S
y.S: Assembler messages:
y.S:2: Error: `bar1' can't be equated to common symbol 'bar'
$
PR gas/21661
* config/obj-elf.c (obj_elf_symver): Don't allow .symver with
common symbol.
(elf_frob_symbol): Likewise.
* testsuite/gas/elf/elf.exp: Run pr21661.
* testsuite/gas/elf/pr21661.d: New file.
* testsuite/gas/elf/pr21661.s: Likewise.
ARC cpus do not accept any jump or instructions with long immediate
into the delay slots.
gas/
2017-06-07 Claudiu Zissulescu <claziss@synopsys.com>
* /config/tc-arc.c (is_br_jmp_insn_p): Update macro with known
instructions to be accounted as jumps.
(assemble_insn): Check for limms into the delay slots. Emit an
error if so.
* testsuite/gas/arc/asm-errors-3.d: New file.
* testsuite/gas/arc/asm-errors-3.err: Likewise.
* testsuite/gas/arc/asm-errors-3.s: Likewise.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARM Cortex-R52
processor.
=== Patch description ===
This patch adds support for Cortex-R52 as an ARMv8-R processor with CRC
extensions.
2017-06-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* NEWS: Mention support of ARM Cortex-R52 processor.
* config/tc-arm.c (arm_cpus): Add entry for ARM Cortex-R52 processor.
* doc/c-arm.texi: Mention support for -mcpu=cortex-r52.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in GAS:
instructions, build attributes and readelf.
=== Patch description ===
Although some differences exist for system registers, from GAS point of
view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state
and a subset of its extensions. This patch therefore introduce a new
feature bit to distinguish the availability of the pan, ras and rdma
extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd
extensions to be used by ARMv8-R.
Most of the changes are then in the testsuite to (i) rename source files
and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename
files with expected output for ARMv8-A build attributes and (iii) add
new files with expected output for ARMv8-R build attributes.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R.
gas/
* NEWS: Mention support for ARMv8-R architecture.
* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
(arm_extensions): Restrict pan, ras and rdma extension to
ARMv8-A and make crypto, fp and simd extensions available to
ARMv8-R.
(cpu_arch_ver): Add entry for ARMv8-R.
(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
logic.
* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
* testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+fp.d: New.
* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
* testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+simd.d: New.
* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1.
* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-bad.d: New.
* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
* testsuite/gas/arm/armv8-ar-barrier.s: This.
* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number
by 1.
* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-it-bad.d: New.
* testsuite/gas/arm/armv8-a.s: Rename into ...
* testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r.d: New.
* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
* testsuite/gas/arm/attr-march-armv8-r.d: New.
* testsuite/gas/arm/crc32.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar.s: This.
* testsuite/gas/arm/crc32.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble.
* testsuite/gas/arm/crc32-armv8-r.d: New.
* testsuite/gas/arm/crc32-bad.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
* testsuite/gas/arm/crc32-bad.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to
assemble.
* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
* testsuite/gas/arm/mask_1.s: Rename into ...
* testsuite/gas/arm/mask_1-armv8-ar.s: This.
* testsuite/gas/arm/mask_1.d: Rename into ...
* testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to
assemble.
* testsuite/gas/arm/mask_1-armv8-r.d: new.
include/
* elf/arm.h (TAG_CPU_ARCH_V8R): New macro.
* opcode/arm.h (ARM_EXT2_V8A): New macro.
(ARM_AEXT2_V8A): Rename into ...
(ARM_AEXT2_V8AR): This.
(ARM_AEXT2_V8A): New macro.
(ARM_AEXT_V8R): New macro.
(ARM_AEXT2_V8R): New macro.
(ARM_ARCH_V8R): New macro.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to remove special casing for ARMv6S-M
autodetection.
=== Motivation ===
Currently, SWI and SVC mnemonics are enabled for ARMv4T and successor
architectures with extra checks in the handler function (do_t_swi) to
give an error message when ARMv6-M is targeted and some more special
casing in aeabi_set_public_attributes. This was made to exclude these
mnemonics for ARMv6-M unless the OS extension is in use.
However this logic is superfluous: there is already code to check
whether an instruction is available based on the feature bit it is part
of and whether the targeted architecture has that feature bit. This
patch aims at removing that unneeded complexity.
=== Patch description ===
The OS extension is already limited to the ARMv6-M architecture so all
this patch does is redefined availability of the ARM_EXT_OS feature bit
to not be present for ARM_ARCH_V6M. ARM_ARCH_V6SM does not need any
change either because it already includes ARM_EXT_OS.
The patch also make sure that the error message that was given by
do_t_swi when SWI/SVC is unavailable is still the same by detecting the
situation in md_assemble.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_ext_v6m): Delete.
(arm_ext_v7m): Delete.
(arm_ext_m): Remove ARM_EXT_OS from the set of feature defined M
profile.
(arm_arch_v6m_only): Delete.
(do_t_swi): Remove special case for ARMv6S-M.
(md_assemble): Display error message previously in do_t_swi when
SVC is not available.
(insns): Guard swi and svc by arm_ext_os for Thumb mode.
(aeabi_set_public_attributes): Remove special case for ARMv6S-M.
include/
* opcode/arm.h (ARM_AEXT_V4TxM): Add ARM_EXT_OS bit to the set.
(ARM_AEXT_V4T): Likewise.
(ARM_AEXT_V5TxM): Likewise.
(ARM_AEXT_V5T): Likewise.
(ARM_AEXT_V6M): Mask off ARM_EXT_OS bit.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to rework the Tag_CPU_arch build attribute
value selection to (i) match architecture or CPU if specified by user
without any need for hack and (ii) match an architecture with all the
features used if in autodetection mode or return an error.
=== Motivation ===
Currently, Tag_CPU_arch build attribute value selection assumes that an
architecture is always a superset of architectures released earlier. As
such, the logic is to browse architectures in chronological order of
release and selecting the Tag_CPU_arch value of the last one to
contribute a feature used[1]/requested[2] not contributed by earlier
architectures.
[1] in case of autodetection mode
[2] otherwise, ie. in case of -mcpu/-march or associated directives
This logic fails the two objectives mentionned in the Context section.
First, due to the assumption it does an architecture can be selected
while not having all the features used/requested which fails the second
objective. Second, not doing an exact match when an architecture or CPU
is selected by the user means the wrong value is chosen when a later
architecture provides a subset of the feature bits of an earlier
architecture. This is the case for the implementation of ARMv8-R (see
later patch).
An added benefit of this patch is that it is possible to easily generate
more consistent build attribute by setting the feature bits from the
architecture matched in aeabi_set_public_attributes in autodetection
mode. This is better done as a separate patch because lots of testcase'
expected results must then be updated accordingly.
=== Patch description ===
The patch changes the main logic for Tag_CPU_arch and
Tag_CPU_arch_profile
values selection to:
- look for an exact match in case an architecture or CPU was specified
on the command line or in a directive
- select the first released architecture that provides a superset of the
feature used in the autodetection case
- select the most featureful architecture in case of -march=all
The array cpu_arch_ver is updated to include all architectures in order
to make the first point work.
Note that when looking for an exact match, the architecture with
selected extension is tried first and then only the architecture. This
is because some architectures are exactly equivalent to an earlier
architecture with its extensions selected. ARMv6S-M (= ARMv6-M + OS
extension) and ARMv6KZ (ARMv6K + security extension) are two such
examples.
Other adjustments are also necessary in aeabi_set_public_attributes to
make this change work.
1) The logic to set Tag_ARM_ISA_use and Tag_THUMB_ISA_use must check the
absence of feature bit used/requested to decide whether to give the
default value for empty files (see EABI attribute defaults test). It was
previously checking that arch == 0 which would only happen if no feature
bit could be matched by any architecture, ie there is no feature bit to
match.
2) A fallback to a superset match must exist when no_cpu_selected ()
returns true. This is because aeabi_set_public_attributes is called
again after relaxation and at this point selected_cpu is set from the
previous execution of that function. There is therefore no way to check
whether the user specified an architecture or CPU.
3) Tag_CPU_arch lines are removed from expected output when the
detected architecture should be pre-ARMv4, since 0 is the Tag_CPU_arch
value for pre-ARMv4 architectures and default value for an absent entry
is 0.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (fpu_any): Defined from FPU_ANY.
(cpu_arch_ver): Add all architectures and sort by release date.
(have_ext_for_needed_feat_p): New.
(get_aeabi_cpu_arch_from_fset): New.
(aeabi_set_public_attributes): Call above function to determine
Tag_CPU_arch and Tag_CPU_arch_profile values. Adapt Tag_ARM_ISA_use
and Tag_THUMB_ISA_use selection logic to check absence of feature bit
accordingly.
* testsuite/gas/arm/attr-march-armv1.d: Fix expected Tag_CPU_arch build
attribute value.
* testsuite/gas/arm/attr-march-armv2.d: Likewise.
* testsuite/gas/arm/attr-march-armv2a.d: Likewise.
* testsuite/gas/arm/attr-march-armv2s.d: Likewise.
* testsuite/gas/arm/attr-march-armv3.d: Likewise.
* testsuite/gas/arm/attr-march-armv3m.d: Likewise.
* testsuite/gas/arm/pr12198-2.d: Likewise.
include/
* opcode/arm.h (FPU_ANY): New macro.
Update x86 assembler and disassembler for CET v2.0:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
1. incsspd and incsspq are changed to take a register opeand with a
different opcode.
2. setssbsy is changed to take no opeand with a different opcode.
gas/
* testsuite/gas/i386/cet-intel.d: Updated.
* testsuite/gas/i386/cet.d: Likewise.
* testsuite/gas/i386/x86-64-cet-intel.d: Likewise.
* testsuite/gas/i386/x86-64-cet.d: Likewise.
* testsuite/gas/i386/cet.s: Update incsspd and setssbsy tests.
* testsuite/gas/i386/x86-64-cet.s: Likewise.
opcodes/
* i386-dis.c (RM_0FAE_REG_5): Removed.
(PREFIX_MOD_3_0F01_REG_5_RM_1): Likewise.
(PREFIX_MOD_3_0F01_REG_5_RM_0): New.
(PREFIX_MOD_3_0FAE_REG_5): Likewise.
(prefix_table): Remove PREFIX_MOD_3_0F01_REG_5_RM_1. Add
PREFIX_MOD_3_0F01_REG_5_RM_0.
(prefix_table): Update PREFIX_MOD_0_0FAE_REG_5. Add
PREFIX_MOD_3_0FAE_REG_5.
(mod_table): Update MOD_0FAE_REG_5.
(rm_table): Update RM_0F01_REG_5. Remove RM_0FAE_REG_5.
* i386-opc.tbl: Update incsspd, incsspq and setssbsy.
* i386-tbl.h: Regenerated.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to allow ARMv7 to be selected in automatic
architecture selection in presence of Thumb division instructions.
=== Motivation ===
any-idiv.d and automatic-sdiv.d testcases in GAS testsuite expect
autodetection code to select ARMv7 in presence of Thumb integer
division. However, the definition of ARM_AEXT_V7 and thus ARM_ARCH_V7 do
not contain these instructions and the idiv extension is only available
for ARMv7-A and ARMv7-R. Therefore, under the stricter automatic
detection code proposed in the subsequent patch of the series ARMv7 is
refused if a Thumb division instruction is present.
=== Patch description ===
This patch adds a new "idiv" extension after the existing one that is
available to all ARMv7 targets. This new entry is ignored by all current
code parsing arm_extensions such that it would be unavailable on the
command-line and remain a purely internal hack, easily removed in favor
of a better solution later. This is considered though by the subsequent
patch reworking automatic detection of build attributes such that ARMv7
is allowed to match in present of Thumb division instructions. For good
measure, comments are added in all instances of code browsing
arm_extensions to mention the expected behavior in case of duplicate
entries as well as a new testcase.
2017-06-20 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_extensions): New duplicate idiv entry to enable
Thumb division for ARMv7 architecture.
(arm_parse_extension): Document expected behavior for duplicate
entries.
(s_arm_arch_extension): Likewise.
* testsuite/gas/arm/forbid-armv7-idiv-ext.d: New test.
* testsuite/gas/arm/forbid-armv7-idiv-ext.l: New expected output for
above test.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to set the feature bits on which to decide
what the build attributes should be according to the mode
(autodetection, user specified architecture or CPU, or
-march/-mcpu=all).
=== Motivation ===
Currently, the flags variable which is used to determine the build
attribute is constructed from the instruction used (arm_arch_used and
thumb_arch_used) as well as the user specified architecture or CPU
(selected_cpu). This means when several .arch are specified the
resulting feature bits can be such that no architecture provide them
all and can thus result in incorrect Tag_CPU_arch. See for instance
what having both .arch armv8-a and .arch armv8-m.base would result in.
This is not caught by the testsuite because of further bugs in the
Tag_CPU_arch build attribute value selection logic (see next patch in
the series).
=== Patch description ===
As one would expect, this patch solves the problem by setting flags
from feature bits used if in autodetection mode [1] and from
selected_cpu otherwise. The logic to set arm_ext_v1, arm_ext_v4t and
arm_ext_os feature bits is also moved to only run in autodetection mode
since otherwise the architecture or CPU would have a consistent set of
feature bits already.
[1] No architecture or CPU was specified by the user
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (aeabi_set_public_attributes): Populate flags from
feature bits used or selected_cpu depending on whether a CPU was
selected by the user.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to simplify the logic to decide whether to
set Tag_DSP_extension.
=== Motivation ===
To decide whether to set Tag_DSP_extension, the current code was
checking whether the flags had DSP instruction but the architecture
selected for Tag_CPU_arch did not have any. This was necessary because
extension feature bit were not available separately. This is no longer
necessary and can be simplified.
=== Patch description ===
The patch change the logic to set Tag_DSP_extension to check whether any
DSP feature bit is set in the extension feature bit, as per the
definition of that build attribute. The patch also removes all
definitions of arm_arch which is now unneeded.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (aeabi_set_public_attributes): Test *mcpu_ext_opt to
decide whether to set Tag_DSP_extension build attribute value. Remove
now useless arm_arch variable.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to keep the distinction between
architecture feature bits and extension ones after parsing has occured.
=== Motivation ===
This distinction is necessary to allow the Tag_CPU_arch build attribute
value to be exactly as per the architecture of the selected CPU. With
mixed architecture and extension feature bit, it is impossible to find
an architecture with an exact match of feature bit and the build
attribute value logic must then select the closest match which might not
be the right architecture. The previous patch in the patch series makes
the distinction possible when parsing -mcpu and .cpu directives but the
distinction gets lost after. Similarly feature bits contributed by
extensions in -march or .arch_extensions directive are mixed together
with architecture extensions.
=== Patch description ===
The patch adds new feature bit pointer for extension feature bits.
Information from the parsing regarding extensions can then be kept
separate in those. This requires adapting arm_parse_extension to deal
with two feature bits, allowing the architecture bits to be marked as
const. It also requires extra care when setting cpu_variant and
selected_cpu because the extension bits are optional since there might
not be any extension in use.
Note that contrary to cpu feature bits, the extension feature bits are
made read/write and are always dynamically allocated. This allows to
unconditionally free them in arm_md_post_relax added for this occasion,
thereby fixing a longstanding memory leak when arm_parse_extension was
invoked (XNEW of ext_fset without corresponding XDELETE).
Introduction of arm_md_post_relax is necessary to only free the
extension feature bits after aeabi_set_attribute_string has been called
for the last time.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (dyn_mcpu_ext_opt): New static variable.
(dyn_march_ext_opt): Likewise.
(md_begin): Copy extension feature bits alongside architecture ones.
Merge extensions feature bits in selected_cpu and cpu_variant if there
is some.
(arm_parse_extension): Pass architecture and extension feature bits in
separate parameters, with architecture bits being read only. Update
**opt_p directly rather than *ext_set and initialize it if needed.
(arm_parse_cpu): Stop merging architecture and extension feature bits
and instead use mcpu_cpu_opt and dyn_mcpu_ext_opt to memorize them
respectively. Adapt to change in parameters of arm_parse_extension.
(arm_parse_arch): Adapt to change in parameters of arm_parse_extension.
(aeabi_set_attribute_string): Make function static.
(arm_md_post_relax): New function.
(s_arm_cpu): Stop merging architecture and extension feature bits and
instead use mcpu_cpu_opt and dyn_mcpu_ext_opt to memorize them
respectively. Merge extension feature bits in cpu_variant
if there is any.
(s_arm_arch): Reset extension feature bit. Set selected_cpu from
*mcpu_cpu_opt and cpu_variant from selected_cpu and *mfpu_opt for
consistency with s_arm_cpu.
(s_arm_arch_extension): Update *dyn_mcpu_ext_opt rather than
selected_cpu, allocating it before hand if needed. Set selected_cpu
from it and then cpu_variant.
(s_arm_fpu): Merge *mcpu_ext_opt feature bits if any in cpu_variant.
* config/tc-arm.h (md_post_relax_hook): Set to arm_md_post_relax.
(aeabi_set_public_attributes): Delete external declaration.
(arm_md_post_relax): Declare externally.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to distinguish for a CPU the feature bits
coming from its architecture from the feature bits coming from
extension(s) available in this CPU.
=== Motivation ===
This distinction is necessary to allow the Tag_CPU_arch build attribute
value to be exactly as per the architecture of the selected CPU. With
mixed architecture and extension feature bit, it is impossible to find
an architecture with an exact match of feature bit and the build
attribute value logic must then select the closest match which might not
be the right architecture.
=== Patch description ===
The patch creates a new field in the arm_cpus table to hold the feature
set for the extensions available in each CPU. The existing architecture
feature set is then updated to remove those feature bit. The patch also
takes advantage of all the lines being changed to reindent the whole
table.
Note: This patch *adds* a memory leak due to mcpu_cpu_opt sometimes
pointing to dynamically allocated feature bits which is never freeed.
The subsequent patch in the series solves this issue as well as a
preexisting identical issue in arm_parse_extension. The patches are kept
separate for ease of review since they are both big enough already.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (struct arm_cpu_option_table): New ext field.
(ARM_CPU_OPT): Add parameter to set new ext field and reorder canonical
name field just after the name field.
(arm_cpus): Move extension feature bit from value field to ext field,
reorder parameter according to changes in ARM_CPU_OPT and reindent.
(arm_parse_cpu): Point mcpu_cpu_opt to a bitfield merging the value and
ext field from the selected arm_cpus entry.
(s_arm_cpu): Likewise.
Get rid of the assumption that XCHAL_* macros are preprocessor
constants: don't use them in preprocessor conditionals or in static
variable initializers.
2017-06-14 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (elf_xtensa_be_plt_entry,
elf_xtensa_le_plt_entry): Add dimension for the ABI to arrays,
keep both windowed and call0 ABI PLT definitions.
(elf_xtensa_create_plt_entry): Use selected ABI to choose upper
elf_xtensa_*_plt_entry endex.
(ELF_MAXPAGESIZE): Fix at minimal supported MMU page size.
gas/
* config/tc-xtensa.c (density_supported, xtensa_fetch_width,
absolute_literals_supported): Leave definitions uninitialized.
(directive_state): Leave entries for directive_density and
directive_absolute_literals initialized to false.
(xg_init_global_config, xtensa_init): New functions.
* config/tc-xtensa.h (TARGET_BYTES_BIG_ENDIAN): Define as 0.
(HOST_SPECIAL_INIT): New definition.
(xtensa_init): New declaration.
Historically the arc abi demanded that a GOT[0] should be referencible as
[pc+_DYNAMIC@gotpc]. Hence we convert a _DYNAMIC@gotpc to a GOTPC reference to
_GLOBAL_OFFSET_TABLE_.
This is no longer the case and uClibc and upcomming GNU libc don't expect this
to happen.
gas/ChangeLog:
Vineet Gupta <vgupta@synopsys.com>
Cupertino Miranda <cmiranda@synopsys.com>
* config/tc-arc.c (md_undefined_symbol): Changed.
* config/tc-arc.h (DYNAMIC_STRUCT_NAME): Removed.
* config/tc-aarch64.c (reg_entry_reg_names): Add IP0,
IP1, FP, and LR as register aliases of register 16, 17, 29
and 30 respectively.
* testsuite/gas/aarch64/diagnostic.l: Remove diagnostic
prohibiting register 'lr' which is now an alias.
* testsuite/gas/aarch64/diagnostic.s: Remove instruction
utilizing register 'lr' which is now an alias.
For Thumb mode, since ARMv8-A, REG_SP is allowed in most of the places in
Rd/Rt/Rt2 etc while it was disallowed before ARMv8-A, and was rejected through
the "reject_bad_reg" macro and several scattered checks.
This patch only rejects REG_SP in "reject_bad_reg" and several related places
for legacy architectures before ARMv8-A. I have checked those affected instructions
, all of them qualify such relaxations.
Testcases adjusted accordingly.
* ld-sp-warn.d was written without .arch and without -march options passed.
By default it assumes all architectures, so I deleted the REG_SP warning
on ldrsb as it's supported on ARMv8-A. There are actually quite a few
seperate tests on other architectures, for example ld-sp-warn-v7.l etc.,
so there the test for ldrsb on legacy architectures are still covered.
* sp-pc-validations-bad-t has been extended to armv8-a.
* strex-bad-t.d restricted on armv7-a.
* Some new tests for REG_SP used as Rd/Rt etc added in sp-usage-thumb2-relax*.
gas/
* config/tc-arm.c (reject_bad_reg): Allow REG_SP on ARMv8-A.
(parse_operands): Allow REG_SP for OP_oRRnpcsp and OP_RRnpcsp on
ARMv8-A.
(do_co_reg): Allow REG_SP for Rd on ARMv8-A.
(do_t_add_sub): Likewise.
(do_t_mov_cmp): Likewise.
(do_t_tb): Likewise.
* testsuite/gas/arm/ld-sp-warn.l: Delete the warning on REG_SP as Rt for
ldrsb.
* testsuite/gas/arm/sp-pc-validations-bad-t-v8a.d: New test.
* testsuite/gas/arm/sp-pc-validations-bad-t-v8a.l: New test.
* testsuite/gas/arm/sp-pc-validations-bad-t.d: Specifies -march=armv7-a.
* testsuite/gas/arm/sp-pc-validations-bad-t.s: Remove ".arch armv7-a".
* testsuite/gas/arm/sp-usage-thumb2-relax-on-v7.d: New test.
* testsuite/gas/arm/sp-usage-thumb2-relax-on-v7.l: New test.
* testsuite/gas/arm/sp-usage-thumb2-relax-on-v8.d: New test.
* testsuite/gas/arm/sp-usage-thumb2-relax.s: New test.
* testsuite/gas/arm/strex-bad-t.d: Specifies -march=armv7-a.
Later CPU generations added optional operands to the ipte/idte
instructions. I've added these with:
https://sourceware.org/ml/binutils/2017-05/msg00316.html ... but
supported the optional operands only with the specific hardware
levels. However, it is more useful to have the optional operands
already in the first versions. Of course they need to be zero there.
Regression-tested with on s390 and s390x. Committed to mainline.
Bye,
-Andreas-
opcodes/ChangeLog:
2017-06-01 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.txt: Support the optional parameters with the first
versions of ipte/idte.
gas/ChangeLog:
2017-06-01 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/esa-g5.d: Add ipte tests.
* testsuite/gas/s390/esa-g5.s: Likewise.
* testsuite/gas/s390/zarch-z196.d: Remove ipte tests.
* testsuite/gas/s390/zarch-z196.s: Likewise.
* testsuite/gas/s390/zarch-z990.d: Add idte tests.
* testsuite/gas/s390/zarch-z990.s: Likewise.
* testsuite/gas/s390/zarch-zEC12.d: Remove ipte/idte tests.
* testsuite/gas/s390/zarch-zEC12.s: Likewise.
This patch extracts ARC CPU definitions from gas/config/tc-arc.c (cpu_types)
into a separate file arc-cpu.def. This will allow reuse of CPU type definition
in multiple places where it might be needed, for example in disassembler. This
will help ensure that gas and disassembker use same option values for CPUs.
arc-cpu.def file relies on preprocessor macroses which are defined somewhere
else. This for example multiple C files to include arc-cpu.def, but define
different macroses, therefore creating different structures.
include/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* elf/arc-cpu.def: New file.
gas/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* config/tc-arc.c (cpu_types): Include arc-cpu.def
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
This patch adds missing variants of ipte and idte instructions added with later CPU
generations.
ipte got an optional operand with z196 and another one with zEC12.
idte got an optional operand with zEC12
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Add new idte/ipte variants.
* s390-opc.txt: Likewise.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-z196.d: Add new idte/ipte variants.
* testsuite/gas/s390/zarch-z196.s: Likewise.
* testsuite/gas/s390/zarch-zEC12.d: Likewise.
* testsuite/gas/s390/zarch-zEC12.s: Likewise.
So far we only had an instruction flag which made an arbitrary number
of operands optional. This limits error checking capabilities for
instructions marked that way. With this patch the optparm flag only
allows a single optional parameter and another one is added (optparm2)
allowing 2 optional arguments. Hopefully we won't need more than that
in the future. So far there will be only a single use of optparm2.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Support new optparm2
instruction flag.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Add new instruction flags optparm2.
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-dis.c (s390_print_insn_with_opcode): Support new optparm2
instruction flag.
* s390-mkopc.c (main): Recognize the new instruction flag when
parsing instruction list.
The per operand optional flag hasn't been used for quite some time.
Cleanup some remains.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Remove S390_OPERAND_OPTIONAL.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Remove code dealing with
S390_OPERAND_OPTIONAL.
This patch allows AArch64 GAS defaulting to ILP32 if it is configured with
aarch64*-linux-gnu_ilp32.
"md_after_parse_args" is implemented to update ABI into ILP32 if DEFAULT_ARCH is
"aarch64:32".
gas/
* configure.tgt: Set "arch" to "aarch64" if ${cpu} equals "aarch64".
Recognize the new triplet name aarch64*-linux-gnu_ilp32.
* configure.ac: Output DEFAULT_ARCH macro for AArch64.
* configure: Regenerate.
* config/tc-aarch64.h (aarch64_after_parse_args): New declaration.
(md_after_parse_args): New define.
* config/tc-aarch64.c (aarch64_abi_type): New enumeration
AARCH64_ABI_NONE.
(DEFAULT_ARCH): New define.
(aarch64_abi): Set default value to AARCH64_ABI_NONE.
(aarch64_after_parse_args): New function.
Tested in targets:
sparc-aout sparc-linux sparc-vxworks sparc64-linux
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/call-relax.d: Support 32-bit targets.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Use -64 to
run asi-bump-warn.
PR ld/21472
ld * emulparams/avrxmega3.sh (RODATA_PM_OFFSET): Set to 0x8000.
* scripttempl/avr.sc
(__RODATA_PM_OFFSET__) [RODATA_PM_OFFSET]: Use RODATA_PM_OFFSET
as default if not already defined.
(.data) [!RODATA_PM_OFFSET]: Don't include .rodata and friends.
(.rodata) [RODATA_PM_OFFSET]: Put at an offset of
__RODATA_PM_OFFSET__.
gas * config/tc-avr.c (mcu_types): Add entries for: attiny416,
attiny417, attiny816, attiny817.
PR gas/21458
* config/tc-arm.c (do_adr): If the ADR involves a thumb function
symbol, ensure that the T bit will be set.
(do_adrl): Likewise.
(do_t_adr): Likewise.
* testsuite/gas/arm/pr21458.s: New test.
* testsuite/gas/arm/pr21458.d: New test driver.
Verify MIPS16e2 ASE instruction assembly, disassembly and object file
flags.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Add `-mips3'
to `as' flags.
* testsuite/binutils-all/mips/mips16e2-undecoded.d: New test.
* testsuite/binutils-all/mips/mips16e2-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-undecoded.s: Remove
`.module mips3'.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-mt.d: New test.
* testsuite/gas/mips/mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2-hilo.d: New test.
* testsuite/gas/mips/mips16e2-hilo-n32.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.d: New test.
* testsuite/gas/mips/mips16e2-imm-error.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2-2.d: New test.
* testsuite/gas/mips/elf-rel9-mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-lui.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips16e2@lui-2.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16e2-imm-error.l: New stderr output.
* testsuite/gas/mips/mips16e2@lui-2.l: New stderr output.
* testsuite/gas/mips/mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-mt.s: New test source.
* testsuite/gas/mips/mips16e2-sub.s: New test source.
* testsuite/gas/mips/mips16e2-mt-sub.s: New test source.
* testsuite/gas/mips/mips16e2-hilo.s: New test source.
* testsuite/gas/mips/mips16e2-reloc-error.s: New test source.
* testsuite/gas/mips/mips16e2-imm-error.s: New test source.
* testsuite/gas/mips/elf-rel9-mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-lui.s: New test source.
* testsuite/gas/mips/mips.exp: Expand `mips32r2-sync',
`mips32r2-sync-1', `lui-1' and `lui-2' tests across MIPS16e2
architectures. Run the new tests.
Define a new 32-bit and 64-bit MIPS16e2 test architecture and adjust
existing tests now run against these architectures accordingly.
gas/
* testsuite/gas/mips/mips.exp (run_dump_test_arch): Add
`mips16e2@' prefix.
(run_list_test_arch): Likewise.
(mips16e2-32, mips16e2-64): New architectures.
* testsuite/gas/mips/mips16e2-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16e-64.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e2-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e2@relax-swap3.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: Remove `source'
tag. Add `-I$srcdir/$subdir' to `as' flags.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: Likewise.
* testsuite/gas/mips/mips16e2-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e2-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-sub.s: Add `.set nomips16e2'.
* testsuite/gas/mips/mips16e-sub.s: Likewise.
* testsuite/gas/mips/mips16e-64-sub.s: Likewise.
* testsuite/gas/mips/mips16-asmacro.s: Remove `.set mips32'.
* testsuite/gas/mips/mips16-32@mips16-asmacro.s: New test
source.
* testsuite/gas/mips/mips16-64@mips16-asmacro.s: New test
source.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
Improve out-of-range operand error diagnostics for invalid values in the
[32768,65535] range used for a signed 16-bit immediate, making the
message consistent with that used for other invalid values, e.g.:
foo.s:1: Error: operand 2 must be an immediate expression `addiu $2,$gp,32768'
foo.s:2: Error: invalid operands `lw $2,32768($gp)'
vs:
foo.s:3: Error: operand 3 out of range `addiu $2,$gp,-32769'
foo.s:4: Error: operand 2 out of range `lw $2,-32769($gp)'
This case does not currently trigger however, for two reasons.
First, for regular MIPS and microMIPS assembly in the case of no match
caused by `match_int_operand' here, the function is always called again
from `mips_ip' via `match_insns', `match_insn' and then `match_operand'
for the same opcode table's entry with `lax_match' set to TRUE, in which
case the attempt to match succeeds and no error is issued.
Second, in the case of MIPS16 assembly no call to `match_int_operand' is
made at all for signed 16-bit immediates, because such immediates are
currently only matched with extensible instructions, and these are
handled in `match_mips16_insn' via `match_expression' directly rather
than via `match_operand'.
This will change for MIPS16 code with MIPS16e2 support introduced, where
non-extensible instructions accepting signed 16-bit immediates will be
added, so make the case work well right from the start:
foo.s:1: Error: operand 3 out of range `addiu $2,$gp,32768'
foo.s:2: Error: operand 2 out of range `lw $2,32768($gp)'
gas/
* config/tc-mips.c (match_int_operand): Call
`match_out_of_range' before returning failure for 0x8000-0xffff
values conditionally allowed.
Improve operand error diagnostics for non-constant expressions used for
a 16-bit immediate, making the message more descriptive and indicating
the offending operand, e.g.:
foo.s:1: Error: invalid operands `lui $2,foo-bar'
will show as:
foo.s:1: Error: operand 2 must be constant `lui $2,foo-bar'
This case does not currently trigger however, for two reasons.
First, for regular MIPS and microMIPS assembly in the case of no match
caused by `match_int_operand' here, the function is always called again
from `mips_ip' via `match_insns', `match_insn' and then `match_operand'
for the same opcode table's entry with `lax_match' set to TRUE, in which
case the attempt to match succeeds and no error is issued.
Second, in the case of MIPS16 assembly no call to `match_int_operand' is
made at all for 16-bit immediates, because such immediates are currently
only matched with extensible instructions, and these are handled in
`match_mips16_insn' via `match_expression' directly rather than via
`match_operand'.
This will change for MIPS16 code with MIPS16e2 support introduced, where
non-extensible instructions accepting 16-bit immediates will be added,
so make the case work well right from the start.
gas/
* config/tc-mips.c (match_int_operand): Call
`match_not_constant' before returning failure for a non-constant
16-bit immediate conditionally allowed.
Improve bignum operand error diagnostics for cases where a constant
would be accepted and report them as range errors, also indicating the
offending operand and instruction, e.g.:
$ cat bignum.s
addiu $2, 0x10000000000000000
break 0x10000000000000000
$ as -o bignum.o bignum.s
bignum.s:1: Error: bignum invalid
bignum.s:2: Error: operand 1 must be constant `break 0x10000000000000000'
$
now show as:
$ as -o bignum.o bignum.s
bignum.s:1: Error: operand 2 out of range `addiu $2,0x10000000000000000'
bignum.s:2: Error: operand 1 out of range `break 0x10000000000000000'
$
gas/
* config/tc-mips.c (match_const_int): Call `match_out_of_range'
rather than `match_not_constant' for unrelocated operands
retrieved as an `O_big' expression.
(match_int_operand): Call `match_out_of_range' for relocatable
operands retrieved as an `O_big' expression.
(match_mips16_insn): Call `match_out_of_range' for relaxable
operands retrieved as an `O_big' expression.
* testsuite/gas/mips/addiu-error.d: New test.
* testsuite/gas/mips/mips16@addiu-error.d: New test.
* testsuite/gas/mips/micromips@addiu-error.d: New test.
* testsuite/gas/mips/break-error.d: New test.
* testsuite/gas/mips/lui-1.l: Adjust error message.
* testsuite/gas/mips/addiu-error.l: New stderr output.
* testsuite/gas/mips/mips16@addiu-error.l: New stderr output.
* testsuite/gas/mips/micromips@addiu-error.l: New stderr output.
* testsuite/gas/mips/break-error.l: New stderr output.
* testsuite/gas/mips/addiu-error.s: New test source.
* testsuite/gas/mips/break-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Improve non-immediate operand error diagnostics for extensible MIPS16
instructions and make it match corresponding regular MIPS and microMIPS
handling, e.g:
$ cat addiu.s
addiu $4, $3, $2
$ as -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: operand 3 must be an immediate expression `addiu $4,$3,$2'
$ as -mips16 -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: invalid operands `addiu $4,$3,$2'
$
To do so observe that for extensible MIPS16 instructions and a non-PC
relative operand this case is handled by an explicit OT_INTEGER check in
`match_mips16_insn' returning a failure right away and consequently
preventing a call to `match_expression' from being made. As from commit
d436c1c2e8 ("Improve error reporting for register expressions"),
<https://sourceware.org/ml/binutils/2013-08/msg00134.html>, however the
check has become redundant as `match_expression' now only ever returns
success for OT_INTEGER argument tokens, and a special case of an OT_CHAR
`(' token already handled by `match_mips16_insn' just ahead of the
`match_expression' call. Previously it also returned success for OT_REG
argument tokens.
Let the call to `match_expression' always happen then, yielding the same
failure for the affected cases, however with more accurate diagnostics
provided by the call making reporting consistent:
$ as -mips16 -o addiu.o addiu.s
addiu.s: Assembler messages:
addiu.s:1: Error: operand 3 must be an immediate expression `addiu $4,$3,$2'
$
gas/
* config/tc-mips.c (match_mips16_insn): Remove the explicit
OT_INTEGER check before the `match_expression' call.
* testsuite/gas/mips/mips16-insn-e.l: Adjust messages.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: Likewise.
* testsuite/gas/mips/mips16-reg-error.d: New test.
* testsuite/gas/mips/mips16-reg-error.l: New stderr output.
* testsuite/gas/mips/mips16-reg-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Improve disallowed relocation operand error diagnostics for MIPS16 code
and make it match corresponding regular MIPS and microMIPS handling,
e.g:
$ cat sltu.s
sltu $2, %lo(foo)
$ as -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: operand 2 must be constant `sltu $2,%lo(foo)'
$ as -mips16 -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: invalid operands `sltu $2,%lo(foo)'
$
To do so call `match_not_constant' from `match_mips16_insn' whenever a
disallowed relocation operation has been noticed, like `match_const_int'
does, making reporting consistent:
$ as -mips16 -o sltu.o sltu.s
sltu.s: Assembler messages:
sltu.s:1: Error: operand 2 must be constant `sltu $2,%lo(foo)'
$
gas/
* config/tc-mips.c (match_mips16_insn): Call
`match_not_constant' for a disallowed relocation operation.
* testsuite/gas/mips/mips16-reloc-error.d: New test.
* testsuite/gas/mips/mips16-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16-reloc-error.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
gas/
* testsuite/gas/mips/lui-1.d: New test.
* testsuite/gas/mips/lui-2.d: New test.
* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
into the new tests.
Complement commit 919731affb ("Add MIPS .module directive") and update
the GAS manual to refer to the `.module' rather than `.set' directive in
command-line option descriptions, following an observation that unlike
`.set' and like the respective command-line option the use of the
`.module' directive affects the ISA and ASE flags recorded in the object
file produced, and therefore it is `.module' rather than `.set' that
corresponds to the respective command-line option.
gas/
* doc/as.texinfo (-mips16, -no-mips16): Refer to `.module
mips16' rather than `.set mips16'.
(-mmicromips, -mno-micromips): Refer to `.module micromips' and
`.module nomicromips' rather than `.set micromips' and `.set
nomicromips'.
(-msmartmips, -mno-smartmips): Refer to `.module smartmips'
rather than `.set smartmips'.
* doc/c-mips.texi (MIPS Options): Refer to `.module mips16',
`.module micromips', `.module nomicromips' and `.module
smartmips' rather than `.set mips16', `.set micromips', `.set
nomicromips' and `.set smartmips' respectively.
For a reason that is unclear commit d6f1659387 ("Support for MIPS16
HI16/LO16 relocations"),
<https://sourceware.org/ml/binutils/2005-02/msg00332.html>, which has
added support for the R_MIPS16_GPREL relocation, has spelled its
corresponding MIPS16 percent-op as `%gprel', rather than `%gp_rel' which
is how its regular MIPS counterpart is spelled. To make assembly code
sharing easier between the regular MIPS and the MIPS16 ISA make both
percent-op spellings acceptable in both kinds of code now.
Parts of this change by Matthew Fortune.
gas/
* config/tc-mips.c (mips_percent_op): Add "%gprel".
(mips16_percent_op): Add "%gp_rel".
* testsuite/gas/mips/elf-rel8.s:: Add `%gprel' forms.
* testsuite/gas/mips/elf-rel8-mips16.s: Add `%gp_rel' forms.
* testsuite/gas/mips/elf-rel8.d: Adjust accordingly.
* testsuite/gas/mips/elf-rel8-mips16.d: Likewise.
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
type to hexadecimal.
(mips16_opcodes): Add operandless "break" and "sdbbp" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
and SDBBP disassembly.
gas/
* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
Following the way how descriptive SYNC mnemonics have been defined in
the architecture[1][2] mark them as aliases, so that the generic SYNC
instruction can be alternatively disassembled along with its immediate
operand, as noted in the documents referred.
References:
[1] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Table 4.7 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 305
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Table 5.28 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 481
opcodes/
* mips-opc.c (mips_builtin_opcodes): Mark "synciobdma", "syncs",
"syncw", "syncws", "sync_acquire", "sync_mb", "sync_release",
"sync_rmb" and "sync_wmb" as aliases.
* micromips-opc.c (micromips_opcodes): Mark "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" as aliases.
gas/
* testsuite/gas/mips/mips32r2-sync-1.d: New test.
* testsuite/gas/mips/micromips@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
And remove the zillion duplicate sources. Also `mips1@isa-override-2.l'
is the same as `r3000@isa-override-2.l', so remove the latter too, now
that `r3000@isa-override-2.d' can name a file to match stderr output
against.
gas/
* testsuite/gas/mips/isa-override-2.d: New test.
* testsuite/gas/mips/mips1@isa-override-2.d: New test.
* testsuite/gas/mips/r3000@isa-override-2.d: New test.
* testsuite/gas/mips/r3900@isa-override-2.d: New test.
* testsuite/gas/mips/mips2@isa-override-2.d: New test.
* testsuite/gas/mips/mips32@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r2@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r3@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r5@isa-override-2.d: New test.
* testsuite/gas/mips/mips32r6@isa-override-2.d: New test.
* testsuite/gas/mips/octeon3@isa-override-2.d: New test.
* testsuite/gas/mips/r3000@isa-override-2.l: Remove list test.
* testsuite/gas/mips/mips1@isa-override-2.s: Remove test source.
* testsuite/gas/mips/r3000@isa-override-2.s: Remove test source.
* testsuite/gas/mips/r3900@isa-override-2.s: Remove test source.
* testsuite/gas/mips/mips2@isa-override-2.s: Remove test source.
* testsuite/gas/mips/mips32@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r2@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r3@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r5@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/mips32r6@isa-override-2.s: Remove test
source.
* testsuite/gas/mips/octeon3@isa-override-2.s: Remove test
source.
* gas/testsuite/gas/mips/mips.exp: Fold corresponding list tests
into the new tests.
Complement commit c60aaac10f ("MIPS/GAS/testsuite: Extend MIPS16
testing over multiple ISAs") and remove a stale `mips16-macro' list test
output replaced with the `mips16-32@mips16-macro' stderr output.
gas/
* testsuite/gas/mips/mips16-macro.l: Remove list test.
Implement the relaxation of MIPS16 PC-relative synthetic LA, DLA, LW and
LD instructions to an equivalent sequence of instructions produced where
the address operand requested is out of range, absolute or requires
linker relocation, for ABIs that use 32-bit addressing and non-PIC code.
The sequence generated uses the register specified for the destination
operand as a temporary and begins with LI to load the high 16-bit part
of the address, then continues with SLL by 16 bits to move that part
into place and finally completes with a suitable operation corresponding
to the synthetic instruction used, one of: 2-argument ADDIU, 2-argument
DADDIU, absolute LW, and absolute LD respectively, providing the low
16-bit part of the address. All instructions use the extended encoding.
As a special exception accept absolute addresses for relaxation even in
PIC code.
For example:
la $2, 0x12345678
produces code as:
li $2, 0x1234
sll $2, $2, 16
addiu $2, 0x5678
would.
Where linker relocation is required emit an R_MIPS16_HI16 relocation on
the initial LI instruction and an R_MIPS16_LO16 relocation on the final
operation.
For example (where `foo' is not local):
lw $3, foo
produces code as:
li $3, %hi(foo)
sll $3, $3, 16
lw $3, %lo(foo)($3)
would.
Emit assembly warnings as appropriate where this new relaxation triggers
in the `nomacro' mode or for an instruction manually placed in a branch
delay slot in the `noreorder' mode. Refrain from relaxation where an
explicit instruction size suffix has been used and in the `noautoextend'
mode.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `pic', `sym32' and
`nomacro' flags.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO):
New macros.
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): Shift bits.
(RELAX_MIPS16_MACRO, RELAX_MIPS16_MARK_MACRO)
(RELAX_MIPS16_CLEAR_MACRO): New macros.
(append_insn): Pass `mips_pic', HAVE_32BIT_SYMBOLS and
`mips_opts.warn_about_macros' settings to RELAX_MIPS16_ENCODE.
(mips16_macro_frag): New function.
(md_estimate_size_before_relax): Handle HI16/LO16 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/mips16@relax-swap3.d: Remove error output,
add dump patterns.
* testsuite/gas/mips/mips16e@relax-swap3.d: New test
subarchitecture.
* testsuite/gas/mips/micromips@relax-swap3.d: Remove trailing
NOP padding.
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-addend-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-addend-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-absolute.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16@relax-swap3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-addend-2.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-addend-3.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-absolute.l: Remove file.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: Remove file.
* testsuite/gas/mips/relax-swap3.s: Adjust trailing padding.
* testsuite/gas/mips/mips16-pcrel-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-pic-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-n64-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-delay-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-pic-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-sym32-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-8.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-n64-9.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n32-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-n64-sym32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n32-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-4.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-6.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-4.d:
New test.
* testsuite/gas/mips/mips16-pcrel-absolute-pic-n64-sym32-6.d:
New test.
* testsuite/gas/mips/mips16-pcrel-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-2.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-3.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-4.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-5.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-0.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-delay-1.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-8.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-addend-9.l: New stderr output.
* testsuite/gas/mips/mips16-pcrel-absolute-4.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-6.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-delay-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-8.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-9.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute-2.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-3.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-4.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-5.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-6.s: New test.
* testsuite/gas/mips/mips16-pcrel-absolute-7.s: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-pcrel-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-2.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-addend-6.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n32-1.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-0.d: New test.
* testsuite/ld-mips-elf/mips16-pcrel-n64-sym32-1.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Complement commit 88a7ef1689 ("MIPS16/GAS: Restore unsupported
relocation diagnostics") and also propagate constant expressions, either
already reduced from absolute symbol references or created from literals
in the first place, used as a PC-relative operand with the MIPS16 LA,
LW, DLA and LD synthetic instructions to relaxation, matching the way
forward absolute symbol references have been handled as from the commit
referred and letting relaxation produce any necessary relocations, if
possible, for the absolute value requested to be reproduced at the run
time.
Call `symbol_append' for any expression symbol created for the purpose
of MIPS16 relaxation as with constant expressions now propagated from
earlier on such symbols may make it through and have R_MIPS16_PC16_S1
relocations emitted against, and therefore need to appear in the symbol
table produced.
gas/
* config/tc-mips.c (append_insn): Call `symbol_append' for any
expression symbol created for MIPS16 relaxation.
(match_mips16_insn): Don't encode a constant value as an
immediate with a PC-relative operand.
* testsuite/gas/mips/mips16-pcrel-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n32-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32-1.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-n64-1.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64-2.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64-1.d: New
test.
* testsuite/gas/mips/mips16-pcrel-absolute-1.l: New stderr
output.
* testsuite/gas/mips/mips16-pcrel-absolute-1.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-1.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-2.s: New test
source.
* testsuite/gas/mips/mips16-branch-absolute-addend-1.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute-1.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-2.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32-1.d:
New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-1.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64-2.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64-1.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Factor out and consolidate duplicate section-relative to PC-relative
symbol value conversion in `mips16_extended_frag' and `md_convert_frag'
used for MIPS16 relaxation, observing that the final calculation in the
latter function implies `stretch == 0'. Sanitize the formatting of code
moved.
gas/
* config/tc-mips.c (mips16_pcrel_val): New function, factored
out from...
(mips16_extended_frag): ... here.
(md_convert_frag): Use `mips16_pcrel_val' rather than repeated
code in MIPS16 relaxation, with `stretch' hardcoded to 0.
Following commit 177b4a6ad0 ("infinite loop in mips16 assembler
relaxation"), <https://sourceware.org/ml/binutils/2002-03/msg00345.html>
the LONG_BRANCH flag used in MIPS16 relaxation has lost its use for
branches. Complement commit 88a7ef1689 ("MIPS16/GAS: Restore
unsupported relocation diagnostics") then, which has removed the remains
of code deactivated by the former commit, and rename the flag to
ALWAYS_EXTENDED, more accurately reflecting its current use to select
the extended form of PC-relative ADDIU, DADDIU, LD and LW instructions.
gas/
* config/tc-mips.c (RELAX_MIPS16_LONG_BRANCH): Rename to...
(RELAX_MIPS16_ALWAYS_EXTENDED): ... this.
(RELAX_MIPS16_MARK_LONG_BRANCH): Rename to...
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED): ... this.
(RELAX_MIPS16_CLEAR_LONG_BRANCH): Rename to...
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED): ... this.
(mips16_extended_frag): Adjust accordingly.
Separate out symbol flag reasons from section reasons to force a
reloc. Yes, this adds another section test to the local symbol case
too.
* symbols.c (S_FORCE_RELOC): Separate section and symbol tests.
Correct the handling of `.option pic0' and `.option pic2' GAS pseudo-ops
in relaxation and use the setting of `mips_pic' (which these directives
control) as at the time a relaxed frag has been created rather than the
final `mips_pic' setting at the end of the source file processed.
To do so record whether `mips_pic' is NO_PIC or not in the frag itself
and use this information throughout relaxation instead of `mips_pic' to
decide which of NO_PIC or SVR4_PIC to produce machine code for, fixing
code generation and removing a possible fatal failure reproducible with:
$ as -32 --relax-branch -o option-pic-relax-3.o option-pic-relax-3.s
option-pic-relax-3.s: Assembler messages:
option-pic-relax-3.s:7: Warning: relaxed out-of-range branch into a jump
option-pic-relax-3.s: Internal error in cvt_frag_to_fill at .../gas/write.c:490.
Please report this bug.
$
using the test source included, due to a buffer overrun in filling the
variable part of a frag.
Likewise use the `fx_tcbit2' flag of a BFD_RELOC_16_PCREL_S2 fixup to
handle the simple case of substituting an out of range unconditional
branch with an equivalent absolute jump in NO_PIC code.
Retain the current way of VXWORKS_PIC use, which commit 41a1578ed1
("MIPS/GAS: Sanitize `.option picX' pseudo-op") has forbidden the use of
`.option picX' with.
gas/
* config/tc-mips.c (RELAX_ENCODE): Add `PIC' flag.
(RELAX_PIC): New macro.
(RELAX_USE_SECOND, RELAX_SECOND_LONGER, RELAX_NOMACRO)
(RELAX_DELAY_SLOT, RELAX_DELAY_SLOT_16BIT)
(RELAX_DELAY_SLOT_SIZE_FIRST, RELAX_DELAY_SLOT_SIZE_SECOND):
Shift bits.
(RELAX_BRANCH_ENCODE): Add `pic' flag.
(RELAX_BRANCH_UNCOND, RELAX_BRANCH_LIKELY, RELAX_BRANCH_LINK)
(RELAX_BRANCH_TOOFAR): Shift bits.
(RELAX_BRANCH_PIC): New macro.
(RELAX_MICROMIPS_ENCODE): Add `pic' flag.
(RELAX_MICROMIPS_PIC): New macro.
(RELAX_MICROMIPS_UNCOND, RELAX_MICROMIPS_COMPACT)
(RELAX_MICROMIPS_LINK, RELAX_MICROMIPS_NODS)
(RELAX_MICROMIPS_RELAX32): Shift bits.
(relax_close_frag): Pass `mips_pic' setting to RELAX_ENCODE.
(append_insn): Pass `mips_pic' setting to RELAX_BRANCH_ENCODE
and RELAX_MICROMIPS_ENCODE, and record it in `fx_tcbit2' of the
first fixup created.
(md_apply_fix) <BFD_RELOC_16_PCREL_S2>: Use `fx_tcbit2' of the
fixup processed rather than `mips_pic' in choosing to relax an
out of range branch to a jump.
(relaxed_branch_length): Use the `pic' flag of the relaxed frag
rather than `mips_pic'.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_estimate_size_before_relax): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/option-pic-relax-0.d: New test.
* testsuite/gas/mips/option-pic-relax-1.d: New test.
* testsuite/gas/mips/option-pic-relax-2.d: New test.
* testsuite/gas/mips/option-pic-relax-3.d: New test.
* testsuite/gas/mips/option-pic-relax-3a.d: New test.
* testsuite/gas/mips/option-pic-relax-4.d: New test.
* testsuite/gas/mips/option-pic-relax-5.d: New test.
* testsuite/gas/mips/option-pic-relax-2.l: New stderr output.
* testsuite/gas/mips/option-pic-relax-3.l: New stderr output.
* testsuite/gas/mips/option-pic-relax-4.l: New stderr output.
* testsuite/gas/mips/option-pic-relax-5.l: New stderr output.
* testsuite/gas/mips/option-pic-relax-0.s: New test source.
* testsuite/gas/mips/option-pic-relax-1.s: New test source.
* testsuite/gas/mips/option-pic-relax-2.s: New test source.
* testsuite/gas/mips/option-pic-relax-3.s: New test source.
* testsuite/gas/mips/option-pic-relax-4.s: New test source.
* testsuite/gas/mips/option-pic-relax-5.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
enter/leave mnemonics are enhanced to not only accept register ranges
but also single register (i.e., r13) or even no GPR register at all.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/leave_enter.d: Update test.
* testsuite/gas/arc/leave_enter.s: Likewise.
opcodes/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_insn_arc): Smartly print enter/leave mnemonics.
* arc-opc.c (insert_r13el): New function.
(R13_EL): Define.
* arc-tbl.h: Add new enter/leave variants.
NOP and MOV 0,0 are having the same encoding. As MOV mnemonic is
located before NOP in the instruction table, the disassembler prints
MOV 0,0 for NOP. Reorder the instructions such that NOP is first.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/b.d: Update test.
* testsuite/gas/arc/noargs_hs.d: Likewise.
opcode/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-tbl.h: Reorder NOP entry to be before MOV instructions.
Correct the size of a BFD_RELOC_MIPS16_16_PCREL_S1 fixup made in
`md_convert_frag', fixing a bug introduced with commit c9775dde32
("MIPS16: Add R_MIPS16_PC16_S1 branch relocation support)". Add test
cases to verify that the overflow of this fixup's in-place addend is
still correctly detected.
gas/
* config/tc-mips.c (md_convert_frag): Correct
BFD_RELOC_MIPS16_16_PCREL_S1 fixup size.
* testsuite/gas/mips/mips16-branch-addend-4.d: New test.
* testsuite/gas/mips/mips16-branch-addend-5.d: New test.
* testsuite/gas/mips/mips16-branch-addend-5.l: New stderr
output.
* testsuite/gas/mips/mips16-branch-addend-4.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-5.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch avoids CALL instructions to be optimized into branches if
the symbols referred to in the CALL instruction are not fully resolved
at the time the assembler writes its output.
Tested in sparc64-linux-gnu and sparc-sun-sunos4.1.3 targets.
No regressions.
gas/ChangeLog:
2017-04-25 Jose E. Marchesi <jose.marchesi@oracle.com>
PR gas/21407
* config/tc-sparc.c (md_apply_fix): Do not transform `call'
instructions into branch instructions in fixups generating
additional relocations.
* testsuite/gas/sparc/call-relax.s: New file.
* testsuite/gas/sparc/call-relax.d: Likewise.
* testsuite/gas/sparc/call-relax-aout.d: Likewise.
* testsuite/gas/sparc/sparc.exp: Test call-relax and call-relax-aout.
The LDR rX, =cst pseudo-instruction suffers from two issues for loading
integer constants in Thumb mode:
- movs is used if the constant and register can be encoded using that
instruction which leads to unexpected behavior due to its flag-setting
behavior
- mov.w, movw and mvn are used for r13 (sp) and r15 (pc) but these
encoding are marked as UNPREDICTABLE
This patch fixes those issues and update testing accordingly.
2017-04-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (move_or_literal_pool): Remove code generating MOVS.
Forbid MOV.W and MOVW if destination is SP or PC.
* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.s: Explain
expectation of LDR not generating a MOVS for low registers and small
constants. Add tests of MOVW generation.
* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Update
expected disassembly.
PR binutils/21380
opcodes * aarch64-tbl.h (aarch64_opcode_table): Fix masks for LD1R, LD2R,
LD3R and LD4R.
gas * testsuite/gas/aarch64/illegal-3.s: New file.
* testsuite/gas/aarch64/illegal-3.d: New file.
* config/tc-xtensa.c (xtensa_maybe_create_literal_pool_frag):
Initialize lps->frag_count with auto_litpool_limit.
(xg_promote_candidate_litpool): New function.
(xtensa_move_literals): Extract candidate litpool promotion code
into separate function. Call it for all possible found
candidates.
(xtensa_switch_to_literal_fragment): Drop 'recursive' flag and
call to xtensa_mark_literal_pool_location that it guards.
Replace it with call to xtensa_maybe_create_literal_pool_frag.
Initialize pool_location with created literal pool candidate.
* testsuite/gas/xtensa/all.exp: Add new tests.
* testsuite/gas/xtensa/auto-litpools-first1.d: New test results.
* testsuite/gas/xtensa/auto-litpools-first1.s: New test.
* testsuite/gas/xtensa/auto-litpools-first2.d: New test results.
* testsuite/gas/xtensa/auto-litpools-first2.s: New test.
* testsuite/gas/xtensa/auto-litpools.d: Fix offsets changed due
to additional jump instruction.
include * dis-asm.h: Add prototypes for wasm32 disassembler.
opcodes * Makefile.am: Add wasm32-dis.c.
* configure.ac: Add wasm32-dis.c to wasm32 target.
* disassemble.c: Add wasm32 disassembler code.
* wasm32-dis.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler
changes.
* testsuite/gas/wasm32/disass.d: New test.
* testsuite/gas/wasm32/disass.s: New test.
* testsuite/gas/wasm32/disass-2.d: New test.
* testsuite/gas/wasm32/disass-2.s: New test.
* testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc
names.
* testsuite/gas/wasm32/reloc.s: Update test for changed assembler
syntax.
* testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn
test to succeed.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
Without this patch, passing "-march=rv64ic -march=rv64i" results in
you getting a "RV64IC" toolchain, which isn't expected.
gas/ChangeLog:
2017-03-30 Palmer Dabbelt <palmer@dabbelt.com>
* config/tc-riscv.c (riscv_clear_subsets): New function.
(riscv_add_subset): Call riscv_clear_subsets and riscv_set_rvc to
clear RVC when it's been previously set.
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
PR 21303
opcodes/
* ppc-dis.c (struct ppc_mopt): Comment.
(ppc_opts <e200z4>): Move PPC_OPCODE_VLE from .sticky to .cpu.
gas/
* testsuite/gas/ppc/pr21303.d,
* testsuite/gas/ppc/pr21303.s: New test
* testsuite/gas/ppc/ppc.exp: Run it.
When GAS is compiled with DEFAULT_CPU set and then run with a -mcpu or
-march option, selected_cpu will be set to the default CPU. This means
the -mcpu is ignored which is surprising behavior. This commit instead
sets selected_cpu from the value passed to -mcpu/-march.
2017-03-24 Thomas preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.: (md_begin): Set selected_cpu from *mcpu_cpu_opt when
CPU_DEFAULT is defined.
It looks like I missed the GAS help text when going through all the
documentation last time, so it printed some of the old-format (never
upstream) arguments. I fixed this, and when I went to check doc/ I
noticed it was missing the '-fpic'/'-fno-pic' options.
add_jump_to_trampoline assumes that jump instruction is in slot 0,
when it's in other slot that results in fixup that references NULL symbol,
which results in segfault later in xtensa_make_cached_fixup.
Search for the non-NULL symbol in the tc_frag_data.slot_symbols and check
that there's exactly one such slot.
xtensa_relax_frag for RELAX_TRAMPOLINE reassigns fixup from the original
instruction with jump to generated jump in the trampoline frag, but does not
fix its fx_r_type or fx_size. That results in "undecodable fix" or
"fixup not contained within frag" error messages during relaxation.
Fix both these fields.
gas/
2017-03-22 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_relax_frag): Change fx_size of the
reassigned fixup to size of jump instruction (3) and fx_r_type
to BFD_RELOC_XTENSA_SLOT0_OP, as there's only one slot.
(add_jump_to_trampoline): Search
origfrag->tc_frag_data.slot_symbols for the slot with non-NULL
symbol and use that slot instead of slot 0.
This patch removes the vx2 facility flag. It will not be used by GCC
and was a misnomer anyway.
Committed to mainline and 2.28 branch.
include/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (S390_INSTR_FLAG_VX2): Remove.
(S390_INSTR_FLAG_FACILITY_MASK): Adjust value.
gas/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Remove S390_INSTR_FLAG_VX2
from cpu_table. Remove vx2, and novx2 from cpu_flags.
opcodes/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Remove vx2 check.
* s390-opc.txt: Remove vx2 instruction flags.
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
* doc/as.texinfo (2byte): Note that if no expressions are present
the directive does nothing. Emphasize that the output is
unaligned, and that this can have an effect on the relocations
generated.
(4byte): Simplify description. Refer back to the 2byte
description.
(8byte): Likewise.
Nick pointed out that I hadn't documented the new -mfpu option
neon-vfpv3 and mentioned that some others were missing.
Having looked through the list only one (neon-fp16) really should be
documented; the other two entries in the real table should not be
documented as they are aliases kept for legacy compatibility reasons.
This patch adds the missing entries and notes in the main table that
the other two entries should not be documented.
I've also fixed a small spelling error in the accompanying text.
* config/tc-arm.c (arm_fpus): Note entires that should not be
documented.
* doc/c-arm.texi (-mfpu): Add missing FPU entries for neon-vfpv3 and
neon-fp16. Fix spelling error.
GCC recently added neon-vfpv3 as an alias for neon in -mfpu. This patch adds a similar alias in GAS.
* config/tc-arm.c (arm_fpus): Add neon-vfpv3 as an alias for neon.
In a later commit I'll be adding a new version of the ".nt" flag for an
ARC700 extension (NPS400) which does not require this same special
handling.
In this commit I have restricted the special flag handling to only apply
if we are assembling for ARCv2. This is a restructuring commit, and
there should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (assemble_insn): Only handle ".t" and ".nt"
specially for ARCv2.
- They can accept 0 in imm field
2017-03-14 Kito Cheng <kito.cheng@gmail.com>
* riscv-opc.c (riscv_opcodes> <c.li>: Use the 'o' immediate encoding.
<c.andi>: Likewise.
<c.addiw> Likewise.
gas/ChangeLog:
2017-03-02 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix): Set fx_frag and
fx_next->fx_frag for CFA_advance_loc relocations.
Many x86 instructions have more than one encodings. Assembler picks
the default one, usually the shortest one. Although the ".s", ".d8"
and ".d32" suffixes can be used to swap register operands or specify
displacement size, they aren't very flexible. This patch adds pseudo
prefixes, {xxx}, to control instruction encoding. The available
pseudo prefixes are {disp8}, {disp32}, {load}, {store}, {vex2}, {vex3}
and {evex}. Pseudo prefixes are preferred over the ".s", ".d8" and
".d32" suffixes, which are deprecated.
gas/
* config/tc-i386.c (_i386_insn): Add dir_encoding and
vec_encoding. Remove swap_operand and need_vrex.
(extra_symbol_chars): Add '}'.
(md_begin): Mark '}' with LEX_BEGIN_NAME. Allow '}' in
mnemonic.
(build_vex_prefix): Don't use 2-byte VEX encoding with
{vex3}. Check dir_encoding and load.
(parse_insn): Check pseudo prefixes. Set dir_encoding.
(VEX_check_operands): Likewise.
(match_template): Check dir_encoding and load.
(parse_real_register): Set vec_encoding instead of need_vrex.
(parse_register): Likewise.
* doc/c-i386.texi: Document {disp8}, {disp32}, {load}, {store},
{vex2}, {vex3} and {evex}. Remove ".s", ".d8" and ".d32"
* testsuite/gas/i386/i386.exp: Run pseudos and x86-64-pseudos.
* testsuite/gas/i386/pseudos.d: New file.
* testsuite/gas/i386/pseudos.s: Likewise.
* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
* testsuite/gas/i386/x86-64-pseudos.s: Likewise.
opcodes/
* i386-gen.c (opcode_modifiers): Replace S with Load.
* i386-opc.h (S): Removed.
(Load): New.
(i386_opcode_modifier): Replace s with load.
* i386-opc.tbl: Add {disp8}, {disp32}, {swap}, {vex2}, {vex3}
and {evex}. Replace S with Load.
* i386-tbl.h: Regenerated.
Currently, the -maltivec and -mvsx GAS options enable *all* of the altivec
and vsx instructions respecitively that have ever been added. This is in
constract to GCC's -maltivec and -mvsx options, which only enable the oldest
(ie, first) set of altivec and vsx instructions. This patch changes GAS to
mimic GCC's behaviour with respect to -maltivec and -mvsx and it solves a
problem with trying to assemble the lxvx instruction which is different
between POWER8 and POWER9.
opcodes/
* ppc-dis.c (ppc_opts) <altivec>: Do not use PPC_OPCODE_ALTIVEC2;
<vsx>: Do not use PPC_OPCODE_VSX3;
gas/
* testsuite/gas/ppc/altivec2.d (as): Use the -mpower8 option.
(objdump): Use the -Mpower8 option.
Assembler displays upper case hex numbers and we need to force a good
alignment to avoid matching NOPs at the end.
* testsuite/gas/i386/x86-64-mpx-inval-2.s: Force a good alignment.
* testsuite/gas/i386/x86-64-mpx-inval-2.l: Expect [0-9A-F]+.
Add asserts that reloc size matches encoding size, and tidy.
* dw2gencfi.c (encoding_size): Return unsigned int.
(emit_expr_encoded): Assert size matches reloc bitsize.
(output_fde): Use unsigned for offset_size and addr_size. Set
addr_size earlier and use in place of constant 4 and uses of
DWARF2_FDE_RELOC_SIZE. Assert it matches reloc bitsize.
Putting the name, comp_dir and producer strings in the .debug_str section
makes it possible to share them across CUs. This saves a small amount of
space (about ~20K on a glibc libc.so.6 build with debuginfo). And makes
it easier for tools like rpm debugedit to adjust the source paths when
generating separate debuginfo files.
gas/
* dwarf2dbg.c (out_debug_abbrev): Use DW_FORM_strp instead of
DW_FORM_string for DW_AT_name, DW_AT_comp_dir and DW_AT_producer.
(out_debug_info): Accept symbols to name, comp_dir and producer
in the .debug_str section and emit those offsets not full strings.
(out_debug_str): New function that outputs the strings for name,
comp_dir and producer in .debug_str and generates symbols to
those strings.
(out_debug_line): Create a .debug_str section if necessary and
call out_debug_str before calling out_debug_info.
* testsuite/gas/aarch64/dwarf.d: Add extra section symbol to
expected output.
Fix a commit 6afe8e98a6 ("internal error for backwards .org"),
<https://www.sourceware.org/ml/binutils/2008-06/msg00212.html>,
GAS regression that caused legitimate code to fail assembly with an
"attempt to move .org backwards" error.
For example with the `mips-linux' target we get:
$ cat org.s
.set mips16
la $2, foo
.org 0x1000
.align 2
foo:
.half 0
$ as -o org.o org.s
org.s: Assembler messages:
org.s:3: Error: attempt to move .org backwards
$
where the location pointer is obviously not moved backwards with `.org'.
The cause is positive `stretch' in relaxation due to a PC-relative ADDIU
instruction (produced from the LA macro used) getting expanded from 2 to
4 bytes as `foo' is noticed to be out of range for the short encoding.
This in turn triggers logic in `relax_segment' which concludes in the
processing of an `rs_org' frag produced that the location pointer is
moved backwards while in fact only the amount to space forward to the
location requested has shrunk, resulting in a negative growth of the
frag.
Correct the bad logic then and instead verify that the fixed part of an
`rs_org' frag has not overrun the location requested, as per the comment
already included with the error message:
/* Growth may be negative, but variable part of frag
cannot have fewer than 0 chars. That is, we can't
.org backwards. */
which accurately describes the regression scenario. Move the comment
ahead the conditional noted, for clarity.
Add generic and MIPS test cases for the `.org' pseudo-op, including the
test case discussed though not integrated with the offending commit in
particular, adjusted to work across all targets.
gas/
* write.c (relax_segment) <rs_org>: Only bail out if the fixed
part of the frag has overrun the location requested.
* testsuite/gas/all/org-1.d: New test.
* testsuite/gas/all/org-2.d: New test.
* testsuite/gas/all/org-3.d: New test.
* testsuite/gas/all/org-4.d: New test.
* testsuite/gas/all/org-5.d: New test.
* testsuite/gas/all/org-6.d: New test.
* testsuite/gas/all/org-1.l: New stderr output.
* testsuite/gas/all/org-2.l: New stderr output.
* testsuite/gas/all/org-3.l: New stderr output.
* testsuite/gas/all/org-1.s: New test source.
* testsuite/gas/all/org-2.s: New test source.
* testsuite/gas/all/org-3.s: New test source.
* testsuite/gas/all/org-4.s: New test source.
* testsuite/gas/all/org-5.s: New test source.
* testsuite/gas/all/org-6.s: New test source.
* testsuite/gas/all/gas.exp: Run the new tests.
* testsuite/gas/mips/org-1.d: New test.
* testsuite/gas/mips/org-2.d: New test.
* testsuite/gas/mips/org-3.d: New test.
* testsuite/gas/mips/org-4.d: New test.
* testsuite/gas/mips/org-5.d: New test.
* testsuite/gas/mips/org-6.d: New test.
* testsuite/gas/mips/org-7.d: New test.
* testsuite/gas/mips/org-8.d: New test.
* testsuite/gas/mips/org-9.d: New test.
* testsuite/gas/mips/org-10.d: New test.
* testsuite/gas/mips/org-11.d: New test.
* testsuite/gas/mips/org-12.d: New test.
* testsuite/gas/mips/org-1.l: New stderr output.
* testsuite/gas/mips/org-4.l: New stderr output.
* testsuite/gas/mips/org-5.l: New stderr output.
* testsuite/gas/mips/org-6.l: New stderr output.
* testsuite/gas/mips/org-10.l: New stderr output.
* testsuite/gas/mips/org-1.s: New test source.
* testsuite/gas/mips/org-2.s: New test source.
* testsuite/gas/mips/org-3.s: New test source.
* testsuite/gas/mips/org-4.s: New test source.
* testsuite/gas/mips/org-5.s: New test source.
* testsuite/gas/mips/org-6.s: New test source.
* testsuite/gas/mips/org-7.s: New test source.
* testsuite/gas/mips/org-8.s: New test source.
* testsuite/gas/mips/org-9.s: New test source.
* testsuite/gas/mips/org-10.s: New test source.
* testsuite/gas/mips/org-11.s: New test source.
* testsuite/gas/mips/org-12.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Just like REX.W affects operand size of the implicit rAX/rDX inputs to
PCMPESTR{I,M}, VEX.W does for VPCMPESTR{I,M}. Allow Q or L suffixes on
the instructions.
Similarly the disassembler needs to be adjusted to no longer require
VEX.W to be zero for the instructions to be valid, and to emit proper
suffixes.
Note, however, that this doesn't address the problem of there being no
way to control (at least) {,E}VEX.W for 32- or 16-bit code. Nor does it
address the problem of the many WIG instructions not getting properly
disassembled when VEX.W=1.
A number of places in elf32-nios.c created dynamic sections but didn't
set the hash table dynobj. That meant we could have duplicate dynamic
sections connected to a number of bfds, so size_dynamic_sections
didn't properly discard or allocate contents.
Also, the entire set of dynamic sections was created in check_relocs
on seeing GOT relocs, when only .got related sections are needed,
probably done to hide segfaults later in finish_dynamic_sections.
The patch fixes these issues and makes the assembler emit errors when
nios2 lacks the necessary pc-relative relocs for subtraction
expressions, rather than silently generating bad code.
eg. ld-elf/merge. I've also tidied uses of elf32_nios2_hash_table and
elf_hash_table.
bfd/
PR 20995
* elf32-nios2.c (nios2_elf32_relocate_section): Use htab
rather than elf32_nios2_hash_table or elf_hash_table.
(create_got_section): Likewise.
(nios2_elf32_finish_dynamic_symbol): Likewise.
(nios2_elf32_adjust_dynamic_symbol): Likewise.
(nios2_elf32_size_dynamic_sections): Likewise.
(nios2_elf32_check_relocs): Delete dynobj, sgot, and srelgot
vars. Use htab equivalents directly instead. Don't create
all dynamic sections on needing just the GOT. Use a goto
rather than a fall-through with reloc test. Ensure
htab->dynobj is set when making dynamic sreloc section.
(nios2_elf32_finish_dynamic_sections): Delete dynobj, use htab
equivalent directly instead. Don't segfault on looking for
.dynamic when dynamic sections have not been created. Don't
segfault on .got.plt being discarded.
(nios2_elf32_size_dynamic_sections): Delete plt and got vars.
Don't set "relocs" on .rela.plt. Do handle .sbss. Delete
fixme and another not so relevant comment.
(nios2_elf_add_symbol_hook): Delete dynobj var. If not
already set, set hash table dynobj on creating .sbss.
gas/
* config/tc-nios2.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
ld/
* testsuite/ld-elf/merge.d: xfail for nios.
This came up because I was looking at ld/tmpdir/addpcis.o and noticed
the odd addends on REL16DX_HA. They ought to both be -4. The error
crept in due REL16DX_HA howto being pc-relative (as indeed it should
be), and code at gas/write.c:1001 after this comment
/* Make it pc-relative. If the back-end code has not
selected a pc-relative reloc, cancel the adjustment
we do later on all pc-relative relocs. */
*not* cancelling the pc-relative adjustment. So I've made a dummy
non-relative split reloc so that the generic code handles this, rather
than attempting to add hacks later in md_apply_fix which would not be
very robust. Having the new internal reloc also makes it easy to
support
addpcis rx,sym@ha
as an equivalent to
addpcis rx,(sym-0f)@ha
0:
The patch also fixes overflow checking, which must test whether the
addi will overflow too since @l relocs don't have any overflow check.
Lastly, since I was poking at md_apply_fix, I arranged to have the
generic gas/write.c code emit errors for subtraction expressions where
we lack reloc support.
include/
* elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment.
* elf/ppc.h (R_PPC_16DX_HA): Likewise.
bfd/
* reloc.c (BFD_RELOC_PPC_16DX_HA): New.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto.
(ppc64_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA.
(ppc64_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto.
(ppc_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis.
(md_apply_fix): Remove fx_subsy check. Move code converting to
pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code
emiiting errors on seeing fx_pcrel set on unexpected relocs, as
that is done now by the generic code via..
* config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define.
(TC_VALIDATE_FIX_SUB): Define.
ld/
* testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at
limits of addpcis range.
Interpret the `jalr $0, $25' instruction encoding with an R_MIPS_JALR
relocation attached as an alias to `jr $25' and convert the jump to an
equivalent branch where possible, consequently covering the MIPSr6
architecture for the purpose of this optimization too.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Also handle the
`jalr $0, $25' instruction encoding.
gas/
* testsuite/gas/mips/jalr4.s: Add `jalr $0, $25' instructions.
* testsuite/gas/mips/jalr4.d: Adjust accordingly. Remove MIPSr6
encoding patterns.
* testsuite/gas/mips/jalr4-n64.d: Likewise.
* testsuite/gas/mips/mipsr6@jalr4.d: New test.
* testsuite/gas/mips/mipsr6@jalr4-n32.d: New test.
* testsuite/gas/mips/mipsr6@jalr4-n64.d: New test.
ld/
* testsuite/ld-mips-elf/jalr4.dd: Adjust for `jalr $0, $25'
instructions.
* testsuite/ld-mips-elf/jalr4-r6.dd: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
HPUX has a different .comm syntax, and anything in the first column
is a label.
gas/
* testsuite/gas/elf/strtab.s: Don't put directives on first
column or continuation with labels not in first column.
ld/
* testsuite/ld-elf/elf.exp: Xfail pr20995 tests on hppa64-hpux.
Set up HPUX defsym. Run pr14170 tests and build symbol3 objects,
defining HPUX where necessary. Define HPUX for implib tests.
* testsuite/ld-elf/comm-data4.d: Run for hpux.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/linkoncerdiff.d: Likewise.
* testsuite/ld-elf/comm-data4.s: Add alternate .comm when HPUX.
* testsuite/ld-elf/comm-data5.s: Likewise.
* testsuite/ld-elf/endsym.s: Likewise.
* testsuite/ld-elf/pr14170c.s: Likewise.
* testsuite/ld-elf/symbol3.s: Likewise.
* testsuite/ld-elf/implib.s: Likewise. Don't start directives
in first column.
* testsuite/ld-elf/linkoncerdiff2.s: Don't use numeric labels.
* testsuite/ld-elf/warn3.d: Run for hpux.
* testsuite/ld-scripts/rgn-at10.d: Xfail for hpux.
* testsuite/ld-scripts/rgn-at11.d: Likewise.
* testsuite/ld-scripts/size-2.d: Remove xfail for hpux.
This patch supports some additions to the SVE architecture prior to
its public release.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16)
(AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2)
(AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX)
(AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD)
(OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD)
(OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S)
(OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H)
(OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH)
(OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD)
(OP_SVE_V_HSD): New macros.
(OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD)
(OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD)
(OP_SVE_VZV_SD, OP_SVE_V_SD): Delete.
(aarch64_opcode_table): Add new SVE instructions.
(aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate
for rotation operands. Add new SVE operands.
* aarch64-asm.h (ins_sve_addr_ri_s4): New inserter.
(ins_sve_quad_index): Likewise.
(ins_imm_rotate): Split into...
(ins_imm_rotate1, ins_imm_rotate2): ...these two inserters.
* aarch64-asm.c (aarch64_ins_imm_rotate): Split into...
(aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two
functions.
(aarch64_ins_sve_addr_ri_s4): New function.
(aarch64_ins_sve_quad_index): Likewise.
(do_misc_encoding): Handle "MOV Zn.Q, Qm".
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4): New extractor.
(ext_sve_quad_index): Likewise.
(ext_imm_rotate): Split into...
(ext_imm_rotate1, ext_imm_rotate2): ...these two extractors.
* aarch64-dis.c (aarch64_ext_imm_rotate): Split into...
(aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two
functions.
(aarch64_ext_sve_addr_ri_s4): New function.
(aarch64_ext_sve_quad_index): Likewise.
(aarch64_ext_sve_index): Allow quad indices.
(do_misc_decoding): Likewise.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New
aarch64_field_kinds.
(OPD_F_OD_MASK): Widen by one bit.
(OPD_F_NO_ZR): Bump accordingly.
(get_operand_field_width): New function.
* aarch64-opc.c (fields): Add new SVE fields.
(operand_general_constraint_met_p): Handle new SVE operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
gas/
* doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum.
* config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q
to be used with SVE registers.
(parse_operands): Handle new SVE operands.
(aarch64_features): Make "sve" require F16 rather than FP. Also
require COMPNUM.
* testsuite/gas/aarch64/sve.s: Add tests for new instructions.
Include compnum tests.
* testsuite/gas/aarch64/sve.d: Update accordingly.
* testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions.
* testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also
update expected output for new FMOV and MOV alternatives.
This patch adds a named "compnum" feature for the ARMv8.3-A FCADD
and FCMLA extensions.
include/
* opcode/aarch64.h (AARCH64_FEATURE_COMPNUM): New macro.
(AARCH64_ARCH_V8_3): Include AARCH64_FEATURE_COMPNUM.
opcodes/
* aarch64-tbl.h (aarch64_feature_simd_v8_3): Replace with...
(aarch64_feature_compnum): ...this.
(SIMD_V8_3): Replace with...
(COMPNUM): ...this.
(CNUM_INSN): New macro.
(aarch64_opcode_table): Use it for the complex number instructions.
gas/
* doc/c-aarch64.texi: Add a "compnum" entry.
* config/tc-aarch64.c (aarch64_features): Likewise,
* testsuite/gas/aarch64/advsimd-compnum.s: New test.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
Opcodes F6/1 and F7/1 are aliases of F6/0 and F7/0 in all modes. This
complements commit 8b89fe14b5 ("X86: Decode opcode 0x82 as opcode 0x80
in 32-bit mode"), just that here 64-bit mode is also covered.
gas/ChangeLog:
Test cases for the architecture level aware SPARC ASI work.
* gas/testsuite/gas/sparc/sparc.exp: 2 new tests
* gas/testsuite/gas/sparc/asi-bump-warn.s: New test
* gas/testsuite/gas/sparc/asi-bump-warn.l: Likewise
* gas/testsuite/gas/sparc/asi-arch-error.s: Likewise
* gas/testsuite/gas/sparc/asi-arch-error.l: Likewise
Discard R_MIPS_JALR and R_MICROMIPS_JALR relocations associated with
jumps that cannot be converted to an equivalent branch right away in
`mips_elf_calculate_relocation' rather than letting them through to
`mips_elf_perform_relocation'. This includes cross-mode jumps which
need to flip the ISA bit or jumps to a misaligned location that cannot
be encoded with a branch, in addition to preemptible symbol references
already handled.
Cross-mode jumps are actually already rejected as the conversion is made
in `mips_elf_perform_relocation', so in this case this change only saves
some processing. Jumps to a misaligned location are however converted,
with bits causing misalignment lost, making resulting code functionally
different even if the lone effect is avoiding an address error exception
with an instruction fetch at the jump destination requested.
Add test cases suitable, also including GAS verification to confirm that
the JALR relocations explicitly requested have indeed been output in the
intermediate objects used.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS_JALR>
<R_MICROMIPS_JALR>: Discard relocation if `cross_mode_jump_p'
or misaligned.
gas/
* testsuite/gas/mips/jalr4.d: New test.
* testsuite/gas/mips/jalr4-n32.d: New test.
* testsuite/gas/mips/jalr4-n64.d: New test.
* testsuite/gas/mips/jalr4.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalr4.dd: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
This adds support of new instructions to the S/390 specific parts.
The important feature of the new instruction set is the support of
single and extended precision floating point vector operations.
Note: arch12 is NOT the official name of the new CPU. It just
continues the series of archXX options supported as alternate names.
The archXX terminology refers to the edition number of the Principle
of Operations manual. The official CPU name will be added later while
keeping support of the arch12 for backwards compatibility.
No testsuite regressions.
Committed to mainline.
Bye,
-Andreas-
opcodes/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Accept arch12 as cpu string and vx2 as
facility.
* s390-opc.c: Add new operand description macros, new instruction
types, instruction masks, and new .insn instruction types.
* s390-opc.txt: Add new arch12 instructions.
include/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): New value
S390_OPCODE_ARCH12.
(S390_INSTR_FLAG_VX2): New macro definition.
gas/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch12.
* doc/as.texinfo: Document arch12 as cpu type.
* doc/c-s390.texi: Likewise.
* testsuite/gas/s390/s390.exp: Run arch12 specific tests.
* testsuite/gas/s390/zarch-arch12.d: New test.
* testsuite/gas/s390/zarch-arch12.s: New test.
* testsuite/gas/s390/zarch-z13.d: Rename some mnemonics in the
output patterns.
With this change an architecture level bump due to assembly ASIs will show
up as a warning/error depending on options passed to gas.
Tested with sparc64-linux-gnu, and it does not introduce any regressions.
gas/ChangeLog:
Add support for associating SPARC ASIs with an architecture level.
* config/tc-sparc.c (parse_sparc_asi): New encode SPARC ASIs.
opcodes/ChangeLog:
Add support for associating SPARC ASIs with an architecture level.
* include/opcode/sparc.h (sparc_asi): New sparc_asi struct.
* opcodes/sparc-opc.c (asi_table): Updated asi_table and encoding/
decoding of SPARC ASIs.
Fix a functional regression with the `.end' pseudo-op, introduced with
commit ecb4347ade ("Last take: approval for MIPS_STABS_ELF killing"),
<https://sourceware.org/ml/binutils/2002-06/msg00443.html>, and commit
dcd410fe15 ("GNU as 2.14 on IRIX 6: crashes with shared libs"),
<https://sourceware.org/ml/binutils/2003-07/msg00415.html>, which caused
symbol values for labels placed between the end of a function's contents
and its terminating `.end' followed by one of the alignment pseudo-ops
to be different depending on whether either `-mdebug', or `-mno-pdr', or
neither of the command-line options is in effect, be it implied or
specified.
Given debug-label-end.s as follows and the `mips-linux' target we have:
$ cat debug-label-end.s
.text
.globl foo
.globl bar
.align 4, 0
.ent foo
foo:
nop
.aent bar
bar:
.insn
.end foo
.align 4, 0
.space 16
.globl baz
.ent baz
baz:
nop
.end baz
.align 4, 0
.space 16
$ as -o debug-label-end.o debug-label-end.s
$ readelf -s debug-label-end.o | grep bar
9: 00000004 0 FUNC GLOBAL DEFAULT 1 bar
$ as -mdebug -o debug-label-end.o debug-label-end.s
$ readelf -s debug-label-end.o | grep bar
9: 00000010 0 FUNC GLOBAL DEFAULT 1 bar
$ as -mno-pdr -o debug-label-end.o debug-label-end.s
$ readelf -s debug-label-end.o | grep bar
8: 00000010 0 FUNC GLOBAL DEFAULT 1 bar
$
The reason is the call to `md_flush_pending_output', which in the case
of `mips*-*-*' targets expands to `mips_emit_delays', which in turn
calls `mips_no_prev_insn', which calls `mips_clear_insn_labels', which
clears the list of outstanding labels. That list is in turn consulted
in `mips_align', called in the interpretation of alignment directives,
and the labels adjusted to the current location.
A call to `md_flush_pending_output' is only made from `s_mips_end' and
then only if `-mpdr' is in effect, which is the default for `*-*-linux*'
and some other `mips*-*-*' targets. A call to `md_flush_pending_output'
is never made from `ecoff_directive_end', which is used in place of
`s_mips_end' when `-mdebug' is in effect. Consequently if `-mno-pdr' or
`-mdebug' is in effect the list of outstanding labels makes it through
to any alignment directive that follows and the labels are differently
interpreted depending on the command-lines options used. And we want
code produced to be always the same.
Call `md_flush_pending_output' unconditionally then in `s_mips_end' and
add such a call from `ecoff_directive_end' as well, as long as the macro
is defined. While `ecoff_directive_end' is shared among targets, the
only one other than `mips*-*-*' actually using it is `alpha*-*-*' and it
does not define `md_flush_pending_output'. So the semantics isn't going
to change for it and neither it has to have its `s_alpha_end' updated
or have code in `ecoff_directive_end' conditionalized.
gas/
* ecoff.c (ecoff_directive_end) [md_flush_pending_output]: Call
`md_flush_pending_output'.
* config/tc-mips.c (s_mips_end) [md_flush_pending_output]: Call
`md_flush_pending_output' unconditionally.
* testsuite/gas/mips/debug-label-end-1.d: New test.
* testsuite/gas/mips/debug-label-end-2.d: New test.
* testsuite/gas/mips/debug-label-end-3.d: New test.
* testsuite/gas/mips/debug-label-end.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Implement the ECOFF `.aent' pseudo-op for ECOFF-style `.mdebug' section
support with ELF objects and, for consistency, also with ECOFF objects.
This is so that the same MIPS source can be assembled without and with
`.mdebug' section generation enabled.
Taking the `gas/testsuite/gas/mips/aent.s' test case source as an
example and the `mips-linux' target we have:
$ as -o aent.o aent.s
$ as -mdebug -o aent.o aent.s
aent.s: Assembler messages:
aent.s:10: Error: unknown pseudo-op: `.aent'
$
because for the !ECOFF_DEBUGGING case (which is the default) the
pseudo-op is already handled by the MIPS backend with `s_mips_ent',
however no handler is present for the opposite case.
For the MIPS target this is a functional regression introduced with
commit ecb4347ade ("Last take: approval for MIPS_STABS_ELF killing"),
<https://sourceware.org/ml/binutils/2002-06/msg00443.html>, where
support for the `.mdebug' section was added along with its associated
`-mdebug'/`-no-mdebug' command-line options, bringing an inconsistency
between the assembly syntax supported for each of these options as far
as the `.aent' pseudo-op is concerned.
Assembly language documentation available describes the pseudo-op
respectively as follows[1]:
"
.aent name, symno Sets an alternate entry point for the current
procedure. Use this information when you want
to generate information for the debugger. It must
appear inside an .ent/.end pair."
and[2]:
"
.aent name [,symno]
Sets an alternate entry point for the current procedure. Use this
information when you want to generate information for the debugger.
This directive must appear between a pair of .ent and .end directives.
(The optional symno is for compiler use only. It refers to a dense
number in a .T file (symbol table).)"
Copy the approach from `s_mips_ent' then and add `.aent' support to the
`.ent' pseudo-op handler shared between the ELF and ECOFF object file
format backends, by setting BSF_FUNCTION for the symbol requested.
References:
[1] "MIPSpro Assembly Language Programmer's Guide", Silicon Graphics,
Inc., Document Number 007-2418-004, Section 8.1 "Op-Codes", p. 96
<http://techpubs.sgi.com/library/manuals/2000/007-2418-004/pdf/007-2418-004.pdf>
[2] "Digital UNIX Assembly Language Programmer's Guide", Digital
Equipment Corporation, Order Number: AA-PS31D-TE, March 1996,
Chapter 5 "Assembler Directives", p. 5-2
<http://h41361.www4.hpe.com/docs/base_doc/DOCUMENTATION/V40G_PDF/APS31DTE.PDF>
gas/
* ecoff.c (ecoff_directive_ent, add_procedure): Handle `.aent'.
* config/obj-ecoff.c (obj_pseudo_table): Add "aent" entry.
* config/obj-elf.c (ecoff_debug_pseudo_table): Likewise.
* testsuite/gas/mips/aent-2.d: New test.
* testsuite/gas/mips/aent-mdebug.d: New test.
* testsuite/gas/mips/aent-mdebug-2.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch adds the SVE-specific system registers.
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Add SVE registers.
(aarch64_sys_reg_supported_p): Handle them.
gas/
* testsuite/gas/aarch64/sve-sysreg.s,
testsuite/gas/aarch64/sve-sysreg.d,
testsuite/gas/aarch64/sve-sysreg-invalid.d,
testsuite/gas/aarch64/sve-sysreg-invalid.l: New tests.
The documentation entry for the SVE feature incorrectly said that
it was enabled by default for ARMv8-A or later. This patch fixes
that and also mentions that +sve implies +simd. (It also implies
+fp, but that follows by transitivity.)
gas/
* doc/c-aarch64.texi: Fix sve entry.
opcodes * arc-regs.h: Distinguish some of the registers different on
ARC700 and HS38 cpus.
gas * testsuite/gas/arc/st.d: Update for 0xe having a name now
This stops powerpc gas blithely accepting such nonsense as
"addi %f4,%cr3,%r31".
PR 21118
gas/
* NEWS: Mention powerpc register checks.
* config/tc-ppc.c (struct pd_reg): Make value a short. Add flags.
(pre_defined_registers): Delete fpscr and pmr entries. Set
register type in flags.
(cr_names): Set type in flags.
(reg_name_search): Return pointer to struct pd_reg rather than value.
(register_name): Adjust to suit. Set X_md from flags.
(ppc_parse_name): Likewise.
(ppc_optimize_expr): New function.
(md_assemble): Verify expresion reg flags match operand.
* config/tc-ppc.h (md_optimize_expr): Define.
(ppc_optimize_expr): Declare.
include/
* opcode/ppc.h (PPC_OPERAND_*): Reassign values, regs first.
(PPC_OPERAND_SPR, PPC_OPERAND_GQR): Define.
opcodes/
* ppc-opc.c (powerpc_operands): Flag SPR, SPRG and TBR entries
with PPC_OPERAND_SPR. Flag PSQ and PSQM with PPC_OPERAND_GQR.
PR 21118 work exposed these errors in the testsuite.
* testsuite/gas/ppc/cell.s: Correct invalid registers.
* testsuite/gas/ppc/vle-simple-1.s: Likewise.
* testsuite/gas/ppc/vle-simple-2.s: Likewise.
2017-02-13 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (parse_ifimm_zero): Make prefix optional in unified
syntax.
* testsuite/gas/arm/vcmp-noprefix-imm.d: New file.
* testsuite/gas/arm/vcmp-noprefix-imm.s: New file.
Include the detailed MIPS option description in the man page along with
other target descriptions and complementing the terse list earlier on.
gas/
* doc/as.texinfo (Overview): Select MIPS options for man page
inclusion.
Complement commit 9d862524f6 ("MIPS: Verify the ISA mode and alignment
of branch and jump targets") and add GAS and LD options to control the
checks for invalid branches between ISA modes introduced there, to help
with some handwritten code lacking `.insn' annotation for labels used as
branch targets and code produced by older versions of GCC which suffers
from the issue with branches to code that has been optimized away,
addressed with GCC commit 242424 ("MIPS/GCC: Mark trailing labels with
`.insn'"), <https://gcc.gnu.org/ml/gcc-patches/2016-11/msg01061.html>.
bfd/
* elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to...
(_bfd_mips_elf_linker_flags): ... this. Add another parameter.
* elfxx-mips.c (mips_elf_link_hash_table): Add
`ignore_branch_isa' member.
(mips_elf_perform_relocation): Do not treat an ISA mode mismatch
in branch relocation calculation as an error if
`ignore_branch_isa' has been set.
(_bfd_mips_elf_insn32): Rename to...
(_bfd_mips_elf_linker_flags): ... this. Rename the `on'
parameter to `insn32' and add an `ignore_branch_isa' parameter.
Handle the new parameter.
gas/
* config/tc-mips.c (mips_ignore_branch_isa): New variable.
(options): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(md_longopts): Add "mignore-branch-isa" and
"mno-ignore-branch-isa" options.
(md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
(fix_bad_cross_mode_branch_p): Return FALSE if
`mips_ignore_branch_isa' has been set.
(md_show_usage): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa'.
* doc/as.texinfo (Target MIPS options): Add
`-mignore-branch-isa' and `-mno-ignore-branch-isa' options.
(-mignore-branch-isa, -mno-ignore-branch-isa): New options.
* doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and
`-mno-ignore-branch-isa' options.
* testsuite/gas/mips/branch-local-ignore-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n32-3.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-2.d: New test.
* testsuite/gas/mips/branch-local-ignore-n64-3.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* emultempl/mipself.em (ignore_branch_isa): New variable.
(mips_create_output_section_statements): Rename
`_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags',
add `ignore_branch_isa' argument.
(PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA enum values.
(PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and
"no-ignore-branch-isa" options.
(PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and
`--no-ignore-branch-isa'.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and
OPTION_NO_IGNORE_BRANCH_ISA.
* ld.texinfo (Options specific to MIPS targets): Add
`--ignore-branch-isa' and `--no-ignore-branch-isa' options.
(ld and the MIPS family): Likewise.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New
test.
* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
gas/
* testsuite/gas/mips/branch-local-2.d: New test.
* testsuite/gas/mips/branch-local-3.d: New test.
* testsuite/gas/mips/branch-local-n32-2.d: New test.
* testsuite/gas/mips/branch-local-n32-3.d: New test.
* testsuite/gas/mips/branch-local-n64-2.d: New test.
* testsuite/gas/mips/branch-local-n64-3.d: New test.
* testsuite/gas/mips/mips.exp: Fold corresponding list tests
into the new tests.
PR 21056
opcodes * tic6x-dis.c (print_insn_tic6x): Correct displaying of parallel
instructions when the previous fetch packet ends with a 32-bit
instruction.
gas * testsuite/gas/tic6x/insns16-parallel.s: New test case.
* testsuite/gas/tic6x/insns16-parallel.d: New test driver.
The use of te-linux.h is unnecessary since the TE_LINUX define is unused
and LOCAL_LABELS_FB is defined to 1 in tc-riscv.h as well.
gas/
* configure.tgt (riscv*-*-*): Remove em=linux.
Correct a regression from commit 8614eeee67 ("Traditional MIPS
patches"), <https://sourceware.org/ml/binutils/2000-07/msg00018.html>,
which caused symbols in linkonce or what is these days known as comdat
sections to be treated as external for the purpose of PIC relocation
generation even if their binding remains STB_LOCAL. This in turn
disabled GOT16/LO16 relocation pairing with references to such symbols,
as no complementing LO16 relocation is expected for external GOT16
references in the o32 ABI, which ultimately leads to link errors, e.g.:
ld: comdat-reloc.o: Can't find matching LO16 reloc against `foo' for R_MIPS_GOT16 at 0x24 in section `.text.bar[bar]'
as with the LD test case included with this change.
Revert the special case for symbols in comdat sections then, making code
actually match `adjust_reloc_syms' as indicated in its explanatory
comment, and adjust calling code accordingly. Also bring back the
corresponding description of what now is `s_is_linkonce', lost with
commit 5f0fe04bc5 ("Improved MIPS16/MIPS32 code intermixing for
gas."), <https://www.sourceware.org/ml/binutils/2006-07/msg00039.html>.
gas/
PR gas/20649
* config/tc-mips.c (pic_need_relax): Don't check for linkonce
symbols, remove the `segtype' parameter.
(mips_frob_file, md_estimate_size_before_relax): Adjust
accordingly.
(s_is_linkonce): Add an explanatory comment.
* testsuite/gas/mips/comdat-reloc.d: New test.
* testsuite/gas/mips/comdat-reloc.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
PR gas/20649
* testsuite/ld-mips-elf/mips-elf.exp: Add PIC comdat GOT16/LO16
relocation pairing link test.
Bit 24 of the indexed element vcmla decode mask was incorrectly
left unset. This could cause incorrect disassembly of some
currently undefined instructions as vcmla.
Rotatation immediates were not printed correctly in the disassembly
(could print 170 and 280 instead of 180 and 270).
opcodes/
* arm-dis.c (coprocessor_opcodes): Fix vcmla mask and disassembly.
gas/
* testsuite/gas/arm/armv8_3-a-simd.s: Add vcmla tests.
* testsuite/gas/arm/armv8_3-a-simd.d: Update.
PR 21059
binutils* arlex.l: Support processing with flex 2.6.3.
* deflex.l: Likewise.
gas * config/bfin-lex.l: Support processing with flex 2.6.3.
* itbl-lex.l: Likewise.
* read.c (temp_ilp): New function. Installs a temporary input
line pointer.
(restore_ilp): New function. Restores the original input line
pointer.
* read.h (temp_ilp): Prototype.
(restore_ilp): Prototype.
* stabs.c (dot_func_p): Use bfd_boolean type.
(generate_asm_file): Use temp_ilp and restore_ilp.
(stabs_generate_asm_lineno): Likewise.
(stabs_generate_asm_endfunc): Likewise.
bfd * config.bfd: Add entries for i686-redox and x86_64-redox.
gas * configure.tgt: Add entry for i386-redox.
ld * configure.tgt: Add entries for x86-redox and x86_64-redox.
gas/
* read.c (emit_leb128_expr): Extended unsigned big number for
sleb128.
* testsuite/gas/all/gas.exp (test_cond): Add sleb128-8 test.
* testsuite/gas/all/sleb128.d: New test.
* testsuite/gas/all/sleb128.s: New test source.
Previously, some pseudoinstructions like "call" only accepted
symbolic addresses and rejected constant addresses with an
esoteric internal error. This patch enables them by deferring
application of constant relocations to md_apply_fix, rather than
eagerly applying them during instruction assembly.
gas/ChangeLog
2017-01-09 Andrew Waterman <andrew@sifive.com>
* config/tc-riscv.c (append_insn): Don't eagerly apply relocations
against constants.
(md_apply_fix): Mark relocations against constants as "done."
TLS relocs against constants previously segfaulted, and illegal
symbol subtractions were silently ignored.
The previous behavior was to segfault.
gas/ChangeLog
2017-01-09 Andrew Waterman <andrew@sifive.com>
* config/tc-riscv.c (md_apply_fix): Report TLS relocations against
constants. Report disallowed symbol subtractions.
This was added so compressed loads could have smaller offsets for
accessing the data section, but the result was that writable sections
ended up in INITIAL_READONLY_SECTIONS. This is a bad idea. The fix is
to just remove this micro-optimization.
Thanks to Alan Morda for finding the problem!
ld/ChangeLog
2017-01-09 Palmer Dabbelt <palmer@dabbelt.com>
Kito Cheng <kito.cheng@gmail.com>
* emulparams/elf32lriscv-defs.sh (INITIAL_READONLY_SECTIONS):
Removed.
(SDATA_START_SYMBOLS): Likewise.
The weaker release consistency support of ARMv8.3-A is allowed as an optional
extension for ARMv8.2-A, so separate command line option and feature flag is
added: -march=armv8.2-a+rcpc turns LDAPR, LDAPRB, LDAPRH instructions on.
opcodes/
* aarch64-tbl.h (RCPC, RCPC_INSN): Define.
(aarch64_opcode_table): Use RCPC_INSN.
include/
* opcode/aarch64.h (AARCH64_FEATURE_RCPC): Define.
(AARCH64_ARCH_V8_3): Update.
gas/
* config/tc-aarch64.c (aarch64_features): Add rcpc.
* doc/c-aarch64.texi (AArch64 Extensions): Document rcpc.
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Rename to ...
* testsuite/gas/aarch64/ldst-rcpc.d: This.
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Rename to ...
* testsuite/gas/aarch64/ldst-rcpc.s: This.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: New test.
gas * config/tc-riscv.c (riscv_set_arch): Whitelist the "q" ISA
extension.
(riscv_after_parse_args): Set FLOAT_ABI_QUAD when the Q ISA is
enabled and no other ABI is specified.
include * opcode/riscv-opc.h: Add support for the "q" ISA extension.
opcodes * riscv-opc.c (riscv-opcodes): Add support for the "q" ISA
extension.
* riscv-opcodes/all-opcodes: Likewise.
The PRU GAS port I originally submitted does not build on 32bit hosts.
This patch fixes it by aligning md_number_to_chars's definition with
the global declaration in tc.h.
Here is the original bug report I got:
https://github.com/rcn-ee/repos/pull/23#issuecomment-269915175
* config/tc-pru.c (md_number_to_chars): Fix parameter to be
valueT, as declared in tc.h.
(md_apply_fix): Fix to work on 32-bit hosts.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.
[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65
[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66
include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.
opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Simplify extended operand handling and only specially process immediates
which require bit shuffling, using the generic operand insertion and
extraction handlers for the '<' (5-bit shift amount) operand code in
particular. Require the least significant bit of all extended operand
forms to be (artificially) set to 0 for their special processing to
trigger.
gas/
* config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend'
use to operands whose LSB position is zero.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Simplify processing of
extended operands.
* mips16-opc.c (decode_mips16_operand): Switch the extended
form of the `<' operand type to LSB position 22.
Bail out right away when an unextended instruction encoding is required
either with the use of a `.t' suffix or by means of `.set noautoextend',
however an operand supplied requires the extended instruction form to be
used.
This is to avoid messing up with the internal state of the assembler,
even though no actual failures are known to happen as a result. Add
test cases for the situation concerned.
gas/
* config/tc-mips.c (match_mips16_insn): Don't update
`forced_insn_length' or the instruction opcode if an operand
requires an extended instruction form, but an unextended one
has been requested.
* testsuite/gas/mips/mips16-relax-unextended-1.d: New test.
* testsuite/gas/mips/mips16-relax-unextended-2.d: New test.
* testsuite/gas/mips/mips16-relax-unextended-1.l: New stderr
output.
* testsuite/gas/mips/mips16-relax-unextended-2.l: New stderr
output.
* testsuite/gas/mips/mips16-relax-unextended-1.s: New test
source.
* testsuite/gas/mips/mips16-relax-unextended-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Replace `0' and `4' operand codes with `.' and `F' respectively to free
up the `0'-`4' consecutive range. No functional change.
gas/
* config/tc-mips.c (mips16_macro_build): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_macro): Likewise.
include/
* opcode/mips.h: Replace `0' and `4' operand codes with `.' and
`F' respectively.
opcodes/
* mips16-opc.c (decode_mips16_operand): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_opcodes): Likewise.
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Remove special casing for the `6' operand code used for the embedded
trap code of the BREAK and the SDBBP instructions to support supposedly
extended forms of these instructions.
According to all versions of the MIPS16 ASE specifications these
instructions are not extensible [1][2][3][4][5][7][8][10][11], and as
from revision 2.50 of the MIPS16e ASE specifications it has been further
clarified what was previously implied, that non-extesiable instructions
when preceded with an EXTEND prefix must cause a Reserved Instruction
exception [5][6][9][10].
Therefore supposedly extended BREAK and SDBBP instructions do not serve
their purpose anymore as they do not cause a Bp and a Debug exception
respectively and supporting these forms in disassembly only causes
confusion.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] same, Table 18. "Extendable MIPS16 Instructions", p. 24
[4] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Table 3.8 "MIPS16e Special Instructions", p. 38
[5] same, Section 3.11 "MIPS16e Extensible Instructions, p. 41
[6] same, Table 3.15 "MIPS16e Extensible Instructions", p. 41
[7] same, Table 3.24 "MIPS16e RR Encoding of the Funct Field", p. 49
[8] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Table 1.8 "MIPS16e Special Instructions", p. 39
[9] same, Section 1.11 "MIPS16e Extensible Instructions", p. 42
[10] same, Table 1.15 "MIPS16e Extensible Instructions", pp. 42-43
[11] same, Table 1.24 "MIPS16e RR Encoding of the Funct Field", p. 50
gas/
* config/tc-mips.c (match_mips16_insn): Remove the `6' operand
code special case and its associated comment.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Remove extended
encoding support.
Correct the handling of `.e' and `.t' instruction size suffixes with
instruction mnemonics which are not followed by any text on the same
line, such as arguments or white space, e.g.:
$ cat test.s
.set mips16
foo:
entry.t # comment
entry.t
exit.t # comment
exit.t
nop.t # comment
nop.t
$ as -32 -o test.o test.s
test.s: Assembler messages:
test.s:4: Error: unrecognized opcode `entry.t'
test.s:6: Error: unrecognized opcode `exit.t'
test.s:8: Error: unrecognized opcode `nop.t'
$
gas/
* config/tc-mips.c (mips16_ip): Handle `.e' and `.t' instruction
suffixes followed by a null character rather than a space too.
* testsuite/gas/mips/mips16-insn-length-noargs.d: New test.
* testsuite/gas/mips/mips16-insn-length-noargs.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new test.
Do not allow any explicitly coded EXTEND instruction to be automatically
scheduled into a jump delay slot, as an EXTEND prefix is coupled with
the next regular MIPS16 instruction and therefore swapping it with a
jump would change program's semantics; EXTEND is not architecturally
allowed to be present in a jump delay slot anyway.
opcodes/
* mips16-opc.c (mips16_opcodes): Set NODS in `pinfo' for
"extend".
gas/
* testsuite/gas/mips/mips16-extend-swap.d: New test.
* testsuite/gas/mips/mips16-extend-swap.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
This patch syncs the generated data structure in tc-msp430.c with the
latest version of devices.csv released by TI.
My understanding is that the devices being removed were "invalid spins",
so can't be being used by anyone, and never will be. Current web
searches related to these devices return no relevant results.
Built and tested (no regressions) as follows:
Configured with: --target=msp430-elf --disable-gdb
Test variations:
msp430-sim/-mcpu=msp430
msp430-sim/-mcpu=msp430x
msp430-sim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either
msp430-sim/-mhwmult=none
msp430-sim/-mhwmult=f5series
gas/
* config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's
devices.csv file as of September 2016.
Previously, the alignment directives were not correctly supported
in the text section when current alignment was only 1 byte (i.e.,
when the address was odd). Since there are no 1-byte instructions
in RISC-V, this patch resolves the bug by writing a zero byte to
obtain 2-byte alignment, at which point a 2-byte NOP can be used
to obtain 4-byte alignment.
Resolves https://github.com/riscv/riscv-gnu-toolchain/issues/205
* config/tc-riscv.c (riscv_make_nops): Emit 2-byte NOPs.
(riscv_frag_align_code): Correct frag_align_code arg.
gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.
To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate. Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.
opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.
gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Add a RESTORE instruction smoke test to the `mips16e' GAS test.
gas/
* testsuite/gas/mips/mips16e.s: Add a RESTORE instruction.
* testsuite/gas/mips/mips16e.d: Adjust accordingly.
Run the `mips16', `mips16-64', `mips16e-64', `mips16-macro',
`mips16-macro-e' and `mips16-macro-t' GAS tests over multiple MIPS16
ISAs.
gas/
* testsuite/gas/mips/mips16.d: Adjust test for multiple MIPS16
ISA testing.
* testsuite/gas/mips/mips16-64.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16e-64.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16-macro.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16e-64.s: Ensure MIPS16 ISA annotation.
* testsuite/gas/mips/mips16e-64.l: Rename to...
* testsuite/gas/mips/mips16e-32@mips16e-64.l: ... this.
* testsuite/gas/mips/mips16-64@mips16.d: New test.
* testsuite/gas/mips/mips16-64@mips16-64.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-macro.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips.exp: Run `mips16', `mips16-64',
`mips16-macro', `mips16-macro-t', `mips16-macro-e' and
`mips16e-64' testing across multiple MIPS16 ISAs. Fold
`mips16-macro' and `mips16e-64' list test invocations into
corresponding dump tests.
Implement individual MIPS16 ISA GAS testing for the 32-bit and 64-bit
variants of the base MIPS16 and the MIPS16e ISA each.
gas/
* testsuite/gas/mips/mips.exp (run_dump_test_arch): Add
`mips16e' and `mips16' prefixes.
(run_list_test_arch): Likewise.
Rename `mips16' architecture to `mips16-32'. Add `mips16-64',
`mips16e-32' and `mips16e-64' architectures. Update `rol64',
`mips16e', `elf${el}-rel2' and `elf-rel4' test invocations
accordingly.
* testsuite/gas/mips/mips16e@branch-swap-3.d: New test.
* testsuite/gas/mips/mips16e@branch-swap-4.d: New test.
* testsuite/gas/mips/mips16e@loc-swap-dis.d: New test.
* testsuite/gas/mips/mips16e@loc-swap.d: New test.
Pad alignment with zeros rather than NOP instructions, for sensible
multi-ISA MIPS16 testing.
gas/
* testsuite/gas/mips/loc-swap.s: Use zeros rather than NOPs for
trailing alignment padding.
* testsuite/gas/mips/loc-swap.d: Adjust accordingly.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/mips16@loc-swap-dis.d: Likewise.
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
Limit the DDIV, DDIVU, DREM, DREMU and DSUBU macros to the MIPS III
rather than MIPS I ISA. These macros expand to machine code sequences
including 64-bit instructions which require a 64-bit ISA. Entries for
those instructions are already correctly marked, however the marking is
ignored if entries are used in the process of macro expansion rather
than directly, making it possible to indirectly produce 64-bit machine
code even when output requested has been limited to a 32-bit ISA.
opcodes/
* mips16-opc.c (mips16_opcodes): Set membership to I3 rather
than I1 for the "ddiv", "ddivu", "drem", "dremu" and "dsubu"
INSN_MACRO entries.
gas/
* testsuite/gas/mips/mips16-macro.l: New list test.
* testsuite/gas/mips/mips.exp: Run the new test.
Limit the `SD ra, offset(sp)' instruction (I64/SDRASP major/minor
opcode) to the MIPS III rather than MIPS I ISA. This is a 64-bit
instruction requiring a 64-bit ISA. This bug has been there since
forever.
opcodes/
* mips16-opc.c (mips16_opcodes): Set membership to I3 rather
than I1 for the SP-relative "sd"/$ra entry (SDRASP minor
opcode).
gas/
* testsuite/gas/mips/mips16-sdrasp.d: New test.
* testsuite/gas/mips/mips16-sdrasp.l: New stderr output.
* testsuite/gas/mips/mips16-sdrasp.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Make sure all tests that require NewABI support are only run with
`has_newabi' targets, removing numerous `mips-sgi-irix5' failures.
gas/
* testsuite/gas/mips/mips.exp: Limit remaining tests that
require NewABI support to `has_newabi' targets.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
Before this commit we didn't cleanly support CFI directives because the
internal offsets used to get relaxed which broke them. This patch
significantly reworks how we handle linker relaxations:
* DWARF is now properly supported
* There is a ".option norelax" to disable relaxations, for when users
write assembly that can't be relaxed (if it's to be later patched up,
for example).
* There is an additional _RELAX relocation that specifies when previous
relocations can be relaxed.
We're in the process of documenting the RISC-V ELF ABI, which will
include documentation of our relocations
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
but we expect that this relocation set will remain ABI compatible in the
future (ie, it's safe to release).
Thanks to Kuan-Lin Chen for figuring out how to correctly relax the
debug info!
include/
* elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32.
bfd/
* reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation.
(BFD_RELOC_RISCV_TPREL_S): Likewise.
(BFD_RELOC_RISCV_RELAX): Likewise.
(BFD_RELOC_RISCV_CFA): Likewise.
(BFD_RELOC_RISCV_SUB6): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET16): Likewise.
(BFD_RELOC_RISCV_SET32): Likewise.
* elfnn-riscv.c (perform_relocation): Handle the new
relocations.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Likewise.
(howto_table): Likewise.
(riscv_reloc_map): Likewise.
(relax_func_t): New type.
(_bfd_riscv_relax_call): Add reserve_size argument, which
controls the maximal offset pessimism. Correct type of max_alignment.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Compute the required reserve size
when relocating and use it to when calling relax_func.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
gas/
* config/tc-riscv.c (riscv_set_options): Add relax.
(riscv_opts): Likewise.
(s_riscv_option): Add relax and norelax.
(riscv_apply_const_reloc): New function.
(append_insn): Move constant relocation handling to
riscv_apply_const_reloc.
(md_pcrel_from): Likewise.
(parse_relocation): Skip BFD_RELOC_UNUSED.
(md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6,
BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA.
(md_apply_fix): Likewise.
(riscv_pre_output_hook): New function.
* config/tc-riscv.h (md_pre_output_hook): Define.
(riscv_pre_output_hook): Declare.
(DWARF_CIE_DATA_ALIGNMENT): Always -4.
This is a mixed bag of format changes:
* Replacing constants with macros (0xffffffff with MINUS_ONE, for
example). There's one technically functional change in here (some
MINUS_ONEs are changed to 0), but it only changes the behavior of an
otherwise-unused field.
* Using 0 instead of 0x0 in the relocation table.
* There were some missing spaces before parens, the spaces have been
added.
* A handful of comments are now more descriptive.
* A bunch of whitespace-only changes, mostly alignment and brace
newlines.
bfd/
* elfnn-riscv.c: Formatting and comment fixes throughout.
* elfxx-riscv.c: Likewise.
(howto_table): Change the src_mask field from MINUS_ONE to 0 for
R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPMOD64, R_RISCV_TLS_DTPREL32,
R_RISCV_TLS_DTPREL64, R_RISCV_TLS_TPREL32, R_RISCV_TLS_TPREL64.
opcodes/
* riscv-opc.c: Formatting fixes.
gas/
* config/tc-riscv.c: Formatting and comment fixes throughout.
Complement commit c9775dde32 ("MIPS16: Add R_MIPS16_PC16_S1 branch
relocation support)" and report an assembly error when a relocation is
required for an instruction, currently a branch only, that has been
forced to use its unextended encoding, either with the use of an
explicit `.t' mnemonic suffix, or by means of `.set noautoextend' being
active, fixing an assertion failure currently caused instead.
gas/
* config/tc-mips.c (md_convert_frag): Report an error instead of
asserting on `ext'.
* testsuite/gas/mips/mips16-branch-unextended-1.d: New test.
* testsuite/gas/mips/mips16-branch-unextended-2.d: New test.
* testsuite/gas/mips/mips16-branch-unextended-1.s: New test
source.
* testsuite/gas/mips/mips16-branch-unextended-2.s: New test.
* testsuite/gas/mips/mips16-branch-unextended.l: New stderr
output.
* testsuite/gas/mips/mips.exp: Run the new tests.
Fix the annotation of SP-relative SD instructions incorrectly marked as
reading from the PC rather than SP, which in turn prevented their 16-bit
forms from being scheduled into jump delay slots. This bug has been
there since forever.
opcodes/
* mips16-opc.c (mips16_opcodes): Set RD_SP rather than RD_PC in
`pinfo2' with SP-relative "sd" entries.
gas/
* testsuite/gas/mips/mips16-sprel-swap.d: New test.
* testsuite/gas/mips/mips16-sprel-swap.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
The internal CN register representation for coprocessor fields used in aarch64
sys, sysl instructions are removed in this patch.
After the change, those fields are represented as immediate. Related checks are
added as well.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range
qualifier.
(operand_general_constraint_met_p): Remove case for CP_REG.
(aarch64_print_operand): Print CRn, CRm operand using imm field.
* aarch64-tbl.h (QL_SYS): Use CR qualifier.
(QL_SYSL): Likewise.
(aarch64_opcode_table): Change CRn, CRm operand class and type.
* aarch64-opc-2.c : Regenerate.
* aarch64-asm-2.c : Likewise.
* aarch64-dis-2.c : Likewise.
include/
* opcode/aarch64.h (aarch64_operand_class): Remove
AARCH64_OPND_CLASS_CP_REG.
(enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn,
AARCH64_OPND_Cm to AARCH64_OPND_CRm.
(aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier.
gas/
* config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register.
(get_reg_expected_msg): Remove CN register case.
(parse_operands): rewrite parser for CRn, CRm operand.
(reg_names): Remove CN register.
* testsuite/gas/aarch64/diagnostic.s: Add a new test case.
* testsuite/gas/aarch64/diagnostic.l: Adjust error message.
This code has never been used throughout the repository history, and
likely not before either, as due to the assymetry of MIPS16 instruction
set encoding there are no 32-bit shift operations having their immediate
shift count placed in the position of the usual `rx' instruction field.
gas/
* config/tc-mips.c (mips16_macro_build) <'>'>: Remove case.
include/
* opcode/mips.h: Remove references to `>' operand code.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.
Make the `e' operand code used with raw EXTEND instructions use the
hexadecimal rather than decimal format, for consistency with what is
actually produced by code in `print_insn_mips16' dedicated to EXTEND
disassembly. Due to that special handling the operand code is only
interpreted for assembly however, which accepts either format either
way, so there is no functional change here.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'e'>: Use HINT rather
than UINT.
gas/
* testsuite/gas/mips/mips16-extend.d: New test.
* testsuite/gas/mips/mips16-extend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
Fix a commit a9752fdf83 ("[ARC] Sync cpu names with the ones accepted
by GCC.") build regression:
cc1: warnings being treated as errors
.../gas/config/tc-arc.c: In function 'arc_show_cpu_list':
.../gas/config/tc-arc.c:3452: error: declaration of 'spaces' shadows a global declaration
.../gas/../include/libiberty.h:248: error: shadowed declaration is here
make[4]: *** [tc-arc.o] Error 1
in a way following commit 91d6fa6a03 ("Add -Wshadow to the gcc command
line options used when compiling the binutils.").
gas/
* config/tc-arc.c (arc_show_cpu_list): Rename `spaces' local
variable to `space_buf'.
Fix a commit 008a97eff0 ("[GAS][ARM]Generate unpredictable warning for
pc used in data processing instructions with register-shifted register
operand.") build regression:
cc1: warnings being treated as errors
.../gas/config/tc-arm.c: In function 'encode_arm_shift':
.../gas/config/tc-arm.c:7439: error: declaration of 'index' shadows a global declaration
/usr/include/string.h:303: error: shadowed declaration is here
make[4]: *** [tc-arm.o] Error 1
in a way following commit 91d6fa6a03 ("Add -Wshadow to the gcc command
line options used when compiling the binutils.").
gas/
* config/tc-arm.c (encode_arm_shift): Rename `index' local
variable to `op_index'.
Replace a global `mips_opts.isa' reference in `is_opcode_valid' and use
a local copy just made in `isa'. No functional change.
gas/
* config/tc-mips.c (is_opcode_valid): Use local `isa'
consistently.
Add support for VCMLA and VCADD advanced SIMD complex number instructions.
The command line option is -march=armv8.3-a+fp16+simd for enabling all
instructions.
In arm-dis.c the formatting syntax was abused a bit to select between
0 vs 90 or 180 vs 270 or 90 vs 270 based on a bit value instead of
duplicating entries in the opcode table.
gas/
* config/tc-arm.c (do_vcmla, do_vcadd): Define.
(neon_scalar_for_vcmla): Define.
(enum operand_parse_code): Add OP_IROT1 and OP_IROT2.
(NEON_ENC_TAB): Add DDSI and QQSI variants.
(insns): Add vcmla and vcadd.
* testsuite/gas/arm/armv8_3-a-simd.d: New.
* testsuite/gas/arm/armv8_3-a-simd.s: New.
* testsuite/gas/arm/armv8_3-a-simd-bad.d: New.
* testsuite/gas/arm/armv8_3-a-simd-bad.l: New.
* testsuite/gas/arm/armv8_3-a-simd-bad.s: New.
opcodes/
* arm-dis.c (coprocessor_opcodes): Add vcmla and vcadd.
(print_insn_coprocessor): Add 'V' format for neon D or Q regs.
ARMv8.3 is an architectural extension of ARMv8. Add the
feature macro and -march=armv8.3-a gas command line option
for the ARM target.
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
* config/tc-arm.c (arm_archs): Add "armv8.3-a".
* doc/c-arm.texi (-march): Add "armv8.3-a".
include/
* opcode/arm.h (ARM_EXT2_V8_3A, ARM_AEXT2_V8_3A): New.
(ARM_ARCH_V8_3A): New.
* configure.ac: Add fuchsia to targets that use ELF.
* configure: Regenerated.
bfd * configure.tgt: Add support for fuchsia (OS).
gas * configure.tgt: Add support for fuchsia (OS).
ld * Makefile.am: Add dependency information for earmelf_fuchsia.c.
* Makefile.in: Regenerate.
* configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
x86_64-*-fuchsia* targets.
* emulparams/armelf_fuchsia.sh: New file.
* emulparams/armelfb_fuchsia.sh: New file.
While decoding 32-bit XOP instructions, 64 bit registers names are printed.
This patch fixes this by ignoring REX_B bit in 32-bit mode.
opcodes/
PR binutils/20637
* i386-dis.c (get_valid_dis386): Ignore REX_B for 32-bit XOP
instructions.
gas/
PR binutils/20637
* testsuite/gas/i386/xop32reg.d: New file.
* testsuite/gas/i386/xop32reg.s: New file.
* testsuite/gas/i386/i386.exp: Run new test.
This patch fixes two problems in the SPARC assembler:
- The diagnostic message
Error: Illegal operands: Immediate value in cbcond is out of range.
is incorrectly issued for non-CBCOND instructions that feature a
simm5 immediate field, such as MPMUL, MONTMUL, etc.
- When an invalid immediate operand is used in a CBCOND
instruction, two redundant error messages are issued to the
user, the second due to a stale fixup (this happens since
commit 85024cd8bc).
Some diagnostic tests for the CBCOND instructions are also
included in the patch.
Tested in both sparc64-linux-gnu and sparcv9-linux-gnu targets.
gas/ChangeLog:
2016-11-25 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Avoid emitting a cbcond error
messages for non-cbcond instructions.
* testsuite/gas/sparc/cbcond-diag.s: New file.
* testsuite/gas/sparc/cbcond-diag.l: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run cbcond-diag tests.
gas/ChangeLog:
2016-11-23 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/sparc.exp (gas_64_check): Make sure the
hwcaps-bump test is run with 64-bit objects.
Maciej W. Rozycki
Kuan-Lin Chen
H.J. Lu
Nick Clifton
claziss
Thomas Preud'homme
Andrew Waterman
James Greenhalgh
Max Filippov
Vineet Gupta
Michael Collison
Jiong Wang
Jim Wilson
Andreas Krebbel
Anton Kolesov
Jose E. Marchesi
eorg-Johann Lay
Alan Modra
Pip Cet
Palmer Dabbelt
Andrew Jenner
Rinat Zelig
Richard Earnshaw
Kito Cheng
Peter Bergner
Mark Wielaard
Szabolcs Nagy
Jan Beulich
Richard Sandiford
Sheldon Lobo
Hans-Peter Nilsson
Nicholas Piggin
Alexis Deruell
Sebastian Huber
Bernhard Rosenkranzer
Nathan Sidwell
Igor Tsimbalist
Jeremy Soller
Tristan Gingold
Norm Jacobs
Dimitar Dimitrov
Joe Seymour
Tim Newsome
Renlin Li
Josh Conner
Amit Pawar
Ambrogino Modigliani
Kuan-Lin Chen