This patch adds the new LDGM/STGM instructions of the
Armv8.5-A Memory Tagging Extension. This is part of the changes
that have been introduced recently in the 00bet10 release
The instructions are as follows:
LDGM Xt, [<Xn|SP>]
STGM Xt, [<Xn|SP>]
*** gas/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for ldgm and stgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new ldgm and stgm.
In Release 6 of the MIPS architecture [1], instruction RDHWR supports
a 3rd operand to serve as the 3-bit select field for the hardware
register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 332-334
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add RDHWR rt rd sel.
gas/
* testsuite/gas/mips/mips.exp: Run hwr-names test.
* testsuite/gas/mips/hwr-names.s: Add test cases for RDHWR with
the SEL field.
* testsuite/gas/mips/mipsr6@hwr-names.d: New file.
1. Use single entry for vcvtne2ps2bf16 and vdpbf16ps with Disp8ShiftVL.
2. Use 5 entries, instead of 8, for vcvtneps2bf16.
* i386-opc.tbl: Consolidate AVX512 BF16 entries.
* i386-init.h: Regenerated.
* ppc-dis.c (print_insn_powerpc): Use a tiny state machine
op_separator to control printing of spaces, comma and parens
rather than need_comma, need_paren and spaces vars.
This patch fixes a problem with disassembly of branch instructions
for processors complying with PowerPC ISA versions prior to version
2.0, ie. those that use "y" bit branch taken hints. Many of the
extended bcctr and bclr mnemonics that should have disassembled with a
"-" suffix, ie. not taken, did not display the "-" due to the ordering
in powerpc_opcodes. I believe it's been that way from the original
85dcf36d72 commit of ppc-opc.c.
I've also added a BH field (optional) to a few opcodes. This gives
better disassembly in raw mode, showing the branch taken hint in the
mnemonic as is done for bc. It would be reasonable to add a BH
field to all bcctr, bclr, and bctar extended mnemonics but that runs
into a small difficulty: Currently we print all or none of the
optional operands. That means for example that "bgectr cr2" would
display as "bgectr cr2,0" if a BH field is added to bgectr.
* ppc-opc.c (XLBH_MASK): Subtract off BH field from BB_MASK.
(powerpc_opcodes): Reorder bcctr and bclr extended mnemonics
to favour printing of "-" branch hint when using the "y" bit.
Allow BH field on bc{ctr,lr,tar}{,l}{-,+}.
When an instruction has operands, the PowerPC disassembler prints
spaces after the opcode so as to line up operands. If the operands
are all optional and all default value, then no operands are printed,
leaving trailing spaces. This patch fixes that.
opcodes/
* ppc-dis.c (print_insn_powerpc): Delay printing spaces after
opcode until first operand is output.
gas/
* testsuite/gas/ppc/476.d: Remove trailing spaces.
* testsuite/gas/ppc/a2.d: Likewise.
* testsuite/gas/ppc/booke.d: Likewise.
* testsuite/gas/ppc/booke_xcoff.d: Likewise.
* testsuite/gas/ppc/e500.d: Likewise.
* testsuite/gas/ppc/e500mc.d: Likewise.
* testsuite/gas/ppc/e6500.d: Likewise.
* testsuite/gas/ppc/htm.d: Likewise.
* testsuite/gas/ppc/power6.d: Likewise.
* testsuite/gas/ppc/power8.d: Likewise.
* testsuite/gas/ppc/power9.d: Likewise.
* testsuite/gas/ppc/vle.d: Likewise.
ld/
* testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
* testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately
glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit.
So for backwards compatibility accept cr field expressions when
assembling mtfsb operands, but disassemble to a plain number.
PR 24390
include/
* opcode/ppc.h (PPC_OPERAND_CR_REG): Comment.
opcodes/
* ppc-opc.c (BTF): Define.
(powerpc_opcodes): Use for mtfsb*.
* ppc-dis.c (print_insn_powerpc): Print fields with both
PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number.
gas/
* testsuite/gas/ppc/476.d: Update mtfsb*.
* testsuite/gas/ppc/a2.d: Likewise.
Similar to the AArch64 patches the Arm disassembler has the same issues with
out of order sections but also a few short comings.
For one thing there are multiple code blocks to determine mapping symbols, and
they all work slightly different, and neither fully correct. The first thing
this patch does is centralise the mapping symbols search into one function
mapping_symbol_for_insn. This function is then updated to perform a search in
a similar way as AArch64.
Their used to be a value has_mapping_symbols which was used to determine the
default disassembly for objects that have no mapping symbols. The problem with
the approach was that it was determining this value in the same loop that needed
it, which is why this field could take on the states -1, 0, 1 where -1 means
"don't know". However this means that until you actually find a mapping symbol
or reach the end of the disassembly glob, you don't know if you did the right
action or not, and if you didn't you can't correct it anymore.
This is why the two jump-reloc-veneers-* testcases end up disassembling some
insn as data when they shouldn't.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for Arm [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix
this we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section
than we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0044/latest/elf-for-the-arm-architecture-abi-2018q4-documentation#aaelf32-table4-7
binutils/ChangeLog:
* testsuite/binutils-all/arm/in-order-all.d: New test.
* testsuite/binutils-all/arm/in-order.d: New test.
* testsuite/binutils-all/arm/objdump.exp: Support .d tests.
* testsuite/binutils-all/arm/out-of-order-all.d: New test.
* testsuite/binutils-all/arm/out-of-order.T: New test.
* testsuite/binutils-all/arm/out-of-order.d: New test.
* testsuite/binutils-all/arm/out-of-order.s: New test.
ld/ChangeLog:
* testsuite/ld-arm/jump-reloc-veneers-cond-long.d: Update disassembly.
* testsuite/ld-arm/jump-reloc-veneers-long.d: Update disassembly.
opcodes/ChangeLog:
* arm-dis.c (struct arm_private_data): Remove has_mapping_symbols.
(mapping_symbol_for_insn): Implement new algorithm.
(print_insn): Remove duplicate code.
The documentation for -D says that on Arm platforms -D should disassemble
data as instructions.
"If the target is an ARM architecture this switch also has the effect of
forcing the disassembler to decode pieces of data found in code sections
as if they were instructions. "
This makes it do as it says on the tincan so it's more consistent with
aarch32. The usecase here is for baremetal developers who have created
their instructions using .word directives instead if .insn.
Though for Linux users I do find this behavior somewhat non-optimal.
Perhaps there should be a new flag that just disassembles the values
following the actual mapping symbol?
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order-all.d: New test.
* testsuite/binutils-all/aarch64/out-of-order-all.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.d:
opcodes/ChangeLog:
* aarch64-dis.c (print_insn_aarch64):
Implement override.
My previous patch for AArch64 was not enough to catch all the cases where
disassembling an out-of-order section could go wrong. It had missed the case
DATA sections could be incorrectly disassembled as TEXT.
Out of order here refers to an object file where sections are not listed in a
monotonic increasing VMA order.
The ELF ABI for AArch64 [1] specifies the following for mapping symbols:
1) A text section must always have a corresponding mapping symbol at it's
start.
2) Data sections do not require any mapping symbols.
3) The range of a mapping symbol extends from the address it starts on up to
the next mapping symbol (exclusive) or section end (inclusive).
However there is no defined order between a symbol and it's corresponding
mapping symbol in the symbol table. This means that while in general we look
up for a corresponding mapping symbol, we have to make at least one check of
the symbol below the address being disassembled.
When disassembling different PCs within the same section, the search for mapping
symbol can be cached somewhat. We know that the mapping symbol corresponding to
the current PC is either the previous one used, or one at the same address as
the current PC.
However this optimization and mapping symbol search must stop as soon as we
reach the end or start of the section. Furthermore if we're only disassembling
a part of a section, the search is a allowed to search further than the current
chunk, but is not allowed to search past it (The mapping symbol if there, must
be at the same address, so in practice we usually stop at PC+4).
lastly, since only data sections don't require a mapping symbol the default
mapping type should be DATA and not INSN as previously defined, however if the
binary has had all its symbols stripped than this isn't very useful. To fix this
we determine the default based on the section flags. This will allow the
disassembler to be more useful on stripped binaries. If there is no section than
we assume you to be disassembling INSN.
[1] https://developer.arm.com/docs/ihi0056/latest/elf-for-the-arm-64-bit-architecture-aarch64-abi-2018q4#aaelf64-section4-5-4
binutils/ChangeLog:
* testsuite/binutils-all/aarch64/in-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: Disassemble data as
well.
opcodes/ChangeLog:
* aarch64-dis.c (print_insn_aarch64): Update the mapping symbol search
order.
The AArch64 disassembler has an optimization that it uses to reduce the amount
it has to search for mapping symbols during disassembly. This optimization
assumes that sections are listed in the section header in monotonic increasing
VMAs. However this is not a requirement for the ELF specification.
Because of this when such "out of order" sections occur the disassembler would
pick the wrong mapping symbol to disassemble the section with.
This fixes it by explicitly passing along the stop offset for the current
disassembly glob and when this changes compared to the previous one we've seen
the optimization won't be performed. In effect this restarts the search from
a well defined starting point. Usually the symbol's address.
The existing stop_vma can't be used for this as it is allowed to be unset and
setting this unconditionally would change the semantics of this field.
binutils/ChangeLog:
* objdump.c (disassemble_bytes): Pass stop_offset.
* testsuite/binutils-all/aarch64/out-of-order.T: New test.
* testsuite/binutils-all/aarch64/out-of-order.d: New test.
* testsuite/binutils-all/aarch64/out-of-order.s: New test.
include/ChangeLog:
* dis-asm.h (struct disassemble_info): Add stop_offset.
opcodes/ChangeLog:
* aarch64-dis.c (last_stop_offset): New.
(print_insn_aarch64): Use stop_offset.
This lets us accept an instruction like
beq a2,x0,.Label
and generate a compressed beqz. This will allow some future simplications
to the gcc support, e.g. eliminating some duplicate patterns, and avoiding
adding new duplicate patterns, since currently we have to handle signed
and equality compares against zero specially.
Tested with rv{32,64}-{elf,linux} cross builds and make checks for binutils
and gcc. There were no regressions.
gas/
* config/tc-riscv.c (validate_riscv_insn) <'C'>: Add 'z' support.
(riscv_ip) <'C'>: Add 'z' support.
opcodes/
* riscv-opc.c (riscv_opcodes) <beq>: Use Cz to compress 3 operand form.
<bne>: Likewise.
The software trap instruction HLT that was introduced in Armv8-a is used
as the semihosting trap instruction in AArch64. In order to allow systems
configured to run AArch64 code to also run AArch32 with semihosting it was
decided that AArch32 should also use HLT in the case of the "mixed mode"
environment. This requires that HLT also be backported to all earlier
architectures. The instruction is in the undefined encoding space earlier
architectures but must trigger a semihosting trap [3].
The Arm Architectural Reference Manual [1] doesn't explicitly mention this
however this is an explicit requirement in the Semihosting-v2 protocol [2].
[1] https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile
[2] https://developer.arm.com/docs/100863/latest/the-semihosting-interface
[3] 19a6e31c9d
gas/ChangeLog:
* config/tc-arm.c (insns): Redefine THUMB_VARIANT and ARM_VARIANT for
hlt to armv1.
* testsuite/gas/arm/armv8a-automatic-hlt.d: Update TAGs
* testsuite/gas/arm/hlt.d: New test.
* testsuite/gas/arm/hlt.s: New test.
opcodes/ChangeLog:
* arm-dis.c (arm_opcodes): Redefine hlt to armv1.
The AArch64 instruction set has cut-outs inside instructions encodings for
when a given encoding that would normally fall within the encoding space of
an instruction is instead undefined.
This updates the first few instructions FMLA, FMLA, FMUL and FMULX in the case
where sz:L == 11.
gas/ChangeLog:
PR binutils/23212
* testsuite/gas/aarch64/undefined_by_elem_sz_l.s: New test.
* testsuite/gas/aarch64/undefined_by_elem_sz_l.d: New test.
opcodes/ChangeLog:
PR binutils/23212
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz.
* aarch64-opc.c (verify_elem_sd): New.
(fields): Add FLD_sz entr.
* aarch64-tbl.h (_SIMD_INSN): New.
(aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and
fmulx scalar and vector by element isns.
opcodes/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Accept arch13 as cpu string.
* s390-opc.c: Add new instruction formats and instruction opcode
masks.
* s390-opc.txt: Add new arch13 instructions.
include/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH13.
gas/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch13.
* doc/c-s390.texi: Document arch13 march option.
* testsuite/gas/s390/s390.exp: Run the arch13 related tests.
* testsuite/gas/s390/zarch-arch13.d: New test.
* testsuite/gas/s390/zarch-arch13.s: New test.
* testsuite/gas/s390/zarch-z13.d: Expect the renamed mnemonics
also for z13.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch updates the st*g instructions
to use a previously reserved field for a new register operand. Thus the
new versions of the instructions are as follows:
- STG Xt, [<Xn|SP>, #<simm>]
- STG Xt, [<Xn|SP>, #<simm>]!
- STG Xt, [<Xn|SP>], #<simm>
- STZG Xt, [<Xn|SP>, #<simm>]
- STZG Xt, [<Xn|SP>, #<simm>]!
- STZG Xt, [<Xn|SP>], #<simm>
- ST2G Xt, [<Xn|SP>, #<simm>]
- ST2G Xt, [<Xn|SP>, #<simm>]!
- ST2G Xt, [<Xn|SP>], #<simm>
- STZ2G Xt, [<Xn|SP>, #<simm>]
- STZ2G Xt, [<Xn|SP>, #<simm>]!
- STZ2G Xt, [<Xn|SP>], #<simm>
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (warn_unpredictable_ldst): Exempt
stg, st2g, stzg and stz2g from Xt == Xn with writeback warning.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Change tests for
stg, stzg, st2g and stz2g.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
* aarch64-tbl.h (QL_LDST_AT): Update macro.
(aarch64_opcode): Change encoding for stg, stzg
st2g and st2zg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch adds the new STZGM instruction.
STGZM Xt, [<Xn|SP>]
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for stzgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new stzgm.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV
instructions. These instructions needed special infrastructure to support
[base]! style for addressing mode. That is also removed now.
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (parse_address_main): Remove support for
[base]! address expression.
(parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2.
(warn_unpredictable_ldst): Remove support for ldstgv_indexed.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv
and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** include/ChangeLog ***
* opcode/aarch64.h (enum aarch64_opnd): Remove
AARCH64_OPND_ADDR_SIMPLE_2.
(enum aarch64_insn_class): Remove ldstgv_indexed.
*** opcodes/ChangeLog ***
* aarch64-asm.c (aarch64_ins_addr_simple_2): Remove.
* aarch64-asm.h (ins_addr_simple_2): Likeiwse.
* aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise.
* aarch64-dis.h (ext_addr_simple_2): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Remove
case for ldstgv_indexed.
(aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv.
(AARCH64_OPERANDS): Remove ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
Check for null before dereferencing an operand pointer. Normally
this situation should never arise, but could happen if a "partial"
instruction is encountered at the end of a file or section.
opcodes/
* s12z-dis.c (print_insn_s12z): Do not dereference an
operand if it is null.
gas/
* testsuite/gas/s12z/jsr.s: New case.
* testsuite/gas/s12z/jsr.d: New case.
opcodes/
* s12z-dis.c (opr_emit_disassembly): Do not omit an index if it is
zero.
This change adds an abstraction layer between the decoding of machine
operations and their disassembled textual representation. This allows
the decoding routines to be re-used for other purposes (at the expense)
of slightly slower running time.
ChangeLog: opcodes/
* s12z-opc.c: New file.
* s12z-opc.h: New file.
* s12z-dis.c: Removed all code not directly related to display
of instructions. Used the interface provided by the new files
instead.
* Makefile.am (TARGET_LIBOPCODES_CFILES) Add s12z-opc.c.
* Makefile.in: regenerate.
* configure.ac (bfd_s12z_arch): Correct the dependencies.
* configure: regenerate.
PPC_INT_FMT is redundant now that bfd.h pulls in inttypes.h if
available. Apparently MacOS Mojave defines int64_t as long long even
though long is also 64 bits, which confuses the logic selecting
PPC_INT_FMT (and BFD_PRI64 too). Hopefully inttypes.h is available on
Mojave.
PR 24028
include/
* opcode/ppc.h (PPC_INT_FMT): Delete.
opcodes/
* ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with
PRId64/PRIx64.
PR gas/23956
gas/
* config/tc-riscv.c (validate_riscv_insn) <'1'>: New case.
(percent_op_null): New.
(riscv_ip) <'j'>: Set imm_reloc before p.
<'1'>: New case.
<'0'>: Use percent_op_null and don't set imm_reloc.
<alu_op>: Handle *args == '1'.
* testsuite/gas/riscv/tprel-add.d: New.
* testsuite/gas/riscv/tprel-add.l: New.
* testsuite/gas/riscv/tprel-add.s: New.
opcodes/
* riscv-opc.c (riscv_opcodes) <"add">: Use 1 not 0 for fourth arg.
When configuring with '--enbale-cgen-maint' the default for both the
opcodes/ and sim/ directories is to assume that the cgen source is
within the binutils-gdb source tree as binutils-gdb/cgen/.
In the old cvs days, this worked well, as cgen was just another
sub-module of the single cvs repository and could easily be checked
out within the binutils-gdb directory, and managed by cvs in the
normal way.
Now that binutils-gdb is in git, while cgen is still in cvs, placing
the cgen respository within the binutils-gdb tree is more troublesome,
and it would be nice if the two tools could be kept separate.
Luckily there is already some initial code in the configure.ac files
for both opcodes/ and sim/ to support having cgen be located outside
of the binutils-gdb tree, however, this was speculative code written
imagining a future where cgen would be built and installed to some
location.
Right now there is no install support for cgen, and so the configure
code in opcodes/ and sim/ doesn't really do anything useful. In this
commit I repurpose this code to allow binutils-gdb to be configured so
that it can make use of a cgen source directory that is outside of the
binutils-gdb tree.
With this commit applied it is now possible to configure and build
binutils-gdb like this:
/path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/
make all-opcodes
make -C opcodes run-cgen-all
Just in case anyone is still using cgen inside the binutils-gdb tree,
I have left the default behaviour of '--enable-cgen-maint' (with no
parameter) unchanged, that is it looks for the cgen directory as
'binutils-gdb/cgen/'.
opcodes/ChangeLog:
* configure.ac (enable-cgen-maint): Support passing path to cgen
source tree.
* configure: Regenerate.
sim/ChangeLog:
* common/acinclude.m4 (enable-cgen-maint): Support passing path to
cgen source tree.
* cris/configure: Regenerate.
* frv/configure: Regenerate.
* iq2000/configure: Regenerate.
* lm32/configure: Regenerate.
* m32r/configure: Regenerate.
* or1k/configure: Regenerate.
* sh64/configure: Regenerate.
The RISC-V assembler generates fake labels with the name '.L0 ' as
part of the debug information (see
gas/config/tc-riscv.h:FAKE_LABEL_NAME).
The problem is that currently, when disassembling an object file, the
output looks like this (this is an example from the GDB testsuite, but
is pretty representative of anything with debug information):
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
0000000000000026 <.L0 >:
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
0000000000000034 <.L0 >:
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L0 >
0000000000000046 <.L0 >:
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
0000000000000050 <.L0 >:
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <.L0 +0xe>
0000000000000066 <.L0 >:
66: 4785 li a5,1
68: a869 j 102 <.L0 >
000000000000006a <.L0 >:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L0 +0x8>
The frequent repeated '.L0 ' labels are pointless, as they are
non-unique there's no way to match a use of '.L0 ' to its appearence
in the output, so we'd be better off just not printing it at all.
That's what this patch does by defining a 'symbol_is_valid' method for
RISC-V. With this commit, the same disassembly now looks like this:
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L4>
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <main+0x40>
66: 4785 li a5,1
68: a869 j 102 <.L5>
000000000000006a <.L4>:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L4+0x8>
In order to share the fake label between the assembler and the
libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME
and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have
just moved FAKE_LABEL_NAME to the include file, however, I thnk this
would be confusing, someone working on the assembler would likely not
expect to find FAKE_LABEL_NAME defined outside of the assembler source
tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the
assembler standard FAKE_LABEL_ defines in the assembler source, but
still share the RISCV_FAKE_LABEL_* with libopcodes.
gas/ChangeLog:
* config/tc-riscv.h (FAKE_LABEL_NAME): Define as
RISCV_FAKE_LABEL_NAME.
(FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR.
include/ChangeLog:
* dis-asm.h (riscv_symbol_is_valid): Declare.
* opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define.
(RISCV_FAKE_LABEL_CHAR): Define.
opcodes/ChangeLog:
* disassembler.c (disassemble_init_for_target): Add RISC-V
initialisation.
* riscv-dis.c (riscv_symbol_is_valid): New function.
ARM Architecture Reference Manual for the profile ARMv8-A, Issue C.a,
states that MOV (register) is an alias of the ORR (shifted register)
iff shift == '00' && imm6 == '000000' && Rn == '11111'. However, mov
is currently preferred for a broader range of orr instructions, which
is incorrect.
2018-12-03 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
opcodes:
PR 23193
PR 19721
* aarch64-tbl.h (aarch64_opcode_table): Only disassemble an ORR
encoding as MOV if the shift operation is a left shift of zero.
gas:
PR 23193
PR 19721
* testsuite/gas/aarch64/pr19721.s: Add new test cases.
* testsuite/gas/aarch64/pr19721.d: Correct existing test
cases and add new ones.
Shift and rotate instructions when the number of bit positions
was an immediate value greater than 1 were incorrectly disassembled.
This change fixes that problem and extends the test to check for
it.
gas/ChangeLog:
testsuite/gas/s12z/shift.s: Add new test case.
testsuite/gas/s12z/shift.d: Add expected result.
opcodes/ChangeLog:
s12z-dis.c (print_insn_shift) [SB_REG_REG_N]: Enter special case
if the postbyte matches the appropriate pattern.
The decoding of the CRC operation in alu instructions was using bits
from the instruction word directly, instead of srcA which would be
different if the swap bit was set.
Signed-off-by: Francois H. Theron <francois.theron@netronome.com>
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds all the data cache instructions that are part of this
extension:
- DC IGVAC, Xt
- DC IGSW, Xt
- DC CGSW, Xt
- DC CIGSW, Xt
- DC CGVAC, Xt
- DC CGVAP, Xt
- DC CGVADP, Xt
- DC CIGVAC, Xt
- DC GVA, Xt
- DC IGDVAC, Xt
- DC IGDSW, Xt
- DC CGDSW, Xt
- DC CIGDSW, Xt
- DC CGDVAC, Xt
- DC CGDVAP, Xt
- DC CGDVADP, Xt
- DC CIGDVAC, Xt
- DC GZVA, Xt
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): New entries for
IGVAC, IGSW, CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA.
(aarch64_sys_ins_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test IGVAC, IGSW,
CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA with DC.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds all the system registers that are part of this
extension and are accessible via the MRS/MSR instructions:
- TCO
- TFSRE0_SL1
- TFSR_EL1
- TFSR_EL2
- TFSR_EL3
- TFSR_EL12
- RGSR_EL1
- GCR_EL1
TCO is also accessible with the MSR(immediate) instruction.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for TCO,
TFSRE0_SL1, TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12,
RGSR_EL1 and GCR_EL1.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for TCO.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test TCO, TFSRE0_SL1,
TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12, RGSR_EL1 and
GCR_EL1 MSR and MRS.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!
This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag Getting instruction from Memory Tagging
Extension.
- LDG <Xt>, [<Xn|SP>, #<simm>]
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range of -4096 and 4080, defaulting to 0.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (QL_LDG): New.
(aarch64_opcode_table): Add ldg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldg.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>
where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Pointer Arithmetic instructions from
MTE. These are the following instructions added in this patch:
- SUBP <Xd>, <Xn|SP>, <Xm|SP>
- SUBPS <Xd>, <Xn|SP>, <Xm|SP>
- CMPP <Xn|SP>, <Xm|SP>
where CMPP is an alias to SUBPS XZR, <Xn|SP>, <Xm|SP>
where
<Xd> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<Xm|SP> : Is the 64-bit second source GPR or Stack pointer.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_opcode_table): Add subp, subps and cmpp.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for subp,
subps and cmpp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>
where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.
This patch addresses the following
1) Adding ARMv8.5-A in select_arm_features.
2) Updating the feature macro so that the new ARM_EXT2_* features for
Armv8.5-A are moved to ARM_AEXT2_V8_5A.
*** opcodes/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (select_arm_features): Update bfd_mach_arm_8
with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML.
*** include/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_ARCH_V8_5A): Move ARM_EXT2_PREDRES and
ARM_EXT2_SB to ...
(ARM_AEXT2_V8_5A): Here.
The instruction mask bits should never overlap any of the operands,
nor should operand bits overlap, but some operands weren't checked.
This patch arranges to check the omitted operands, using a mask
returned by the operand->insert function. Some tweaking of various
insert functions is needed to support this: The error case must set
field bits.
Since I was looking at the insert functions, I tidied some dead code
and simplified some of the powerpc_operands entries.
gas/
* config/tc-ppc.c (insn_validate): Don't ignore mask in
PPC_OPSHIFT_INV case. Call the insert function to calculate
a mask.
opcodes/
* ppc-opc.c (insert_arx, insert_ary, insert_rx, insert_ry, insert_ls),
(insert_evuimm1_ex0, insert_evuimm2_ex0, insert_evuimm4_ex0),
(insert_evuimm8_ex0, insert_evuimm_lt8, insert_evuimm_lt16),
(insert_rD_rS_even, insert_off_lsp, insert_off_spe2, insert_Ddd):
Don't return zero on error, insert mask bits instead.
(insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w): Delete.
(insert_sh6, extract_sh6): Delete dead code.
(insert_sprbat, insert_sprg): Use unsigned comparisions.
(powerpc_operands <OIMM>): Set shift count rather than using
PPC_OPSHIFT_INV.
<SE_SDH, SE_SDW>: Likewise. Don't use insert/extract functions.
For the flavors having a GPR operand EVEX.W is ignored outside of 64-bit
mode. The mnemonic should therefore not be KMOVQ, the GPR operand should
not name a non-existing 64-bit register, just like is already the case
for the AVX counterparts, and the Disp8 scaling factor should be 4
rather than 8.
PEXTR{B,W} and PINSR{B,W}, just like for AVX512BW, are WIG, no matter
that the SDM uses a nonstandard description of that fact.
PEXTRD, even with EVEX.W set, ignores that bit outside of 64-bit mode,
just like its AVX counterpart.
Many VEX-/EVEX-encoded instructions accessing GPRs become WIG outside of
64-bit mode. The respective templates should specify neither VexWIG nor
VexW0, but instead the setting of the bit should be determined from
- REX.W in 64-bit mode,
- the setting established through -mvexwig= / -mevexwig= otherwise.
This implies that the evex-wig2 testcase needs to go away, as being
wrong altogether.
A few test additions desirable here will only happen in later patches,
as the disassembler needs adjustments first.
Once again SSE2AVX templates are left alone, for it being unclear what
the behavior there should be.
Quite a few templates were marked LIG while really the insns aren't.
Introduce descriptive shorthands once again, instead of continuing to
use the less legible original forms.
The 0F C5 encoding is indeed a load type one (just that memory operands
are not permitted), while the 0F 3A 15 encoding is obviously a store.
Allow the pseudo prefixes to be used to select between them.
Also move (without any change) the secondary AVX512BW templates next to
the primary one.
Commits 6865c0435a ("x86: Support VEX/EVEX WIG encoding") and 6fa52824c3
("x86: Replace VexW=3 with VexWIG") omitted quite a few templates, oddly
enough in some cases despite testcases getting added (which then were
recorded with wrong expected output).
Also adjust VPMAXUB's attributes in the AVX512BW case to match ordering
of that of neighboring templates.
For the moment SSE2AVX templates are left alone, as it isn't clear
whether they were intentionally left untouched by the original commits
(the descriptions don't say either way).
In this context I question the decision in commit 0375113302 ("x86: Add
-mvexwig=[0|1] option to assembler") to move the logic to determine the
value of the W bit ahead of the decision whether to use 2-byte VEX:
While I can see this as one possible interpretation of -mvexwig=, the
other alternative (setting the value of the bit only if it actually
exists in the encoding) looks as reasonable to me, and perhaps even more
in line with us generally trying to pick the shortest encoding.
This patch adds the vector alignment hints to the vector load and
store instructions as documented in the IBM z14 Principles of
Operations manual:
http://publibfi.boulder.ibm.com/epubs/pdf/dz9zr011.pdf
opcodes/ChangeLog:
2018-10-23 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-opc.txt: Add vector load/store instructions with additional
alignment parameter.
gas/ChangeLog:
2018-10-23 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (md_gather_operands): Fix for optional operands
following memory addresses.
* testsuite/gas/s390/zarch-arch12.d: Add regexp checks for new
instruction variants.
* testsuite/gas/s390/zarch-arch12.s: Emit new instruction
variants.
The disassembler for Arm has some aborts in it in places it assumes can never
be reached. Under normal circumstances they indeed cannot be reached because
the right options are selected from the ARM attributes in the ELF file.
However when disassembling with -b binary then if you do not get the options
right the disassembler just aborts. This changes it so it just prints how it
was trying to interpret the instruction and prints UNKNOWN instructions next to it.
This way the user has an idea of what's going.
gas/ChangeLog:
* testsuite/gas/arm/undefined-insn-arm.d: New test.
* testsuite/gas/arm/undefined-insn-thumb.d: New test.
* testsuite/gas/arm/undefined-insn.s: New test.
opcodes/ChangeLog:
* arm-dis.c (UNKNOWN_INSTRUCTION_32BIT): Format specifier for arm mode.
(UNKNOWN_INSTRUCTION_16BIT): Format specifier for thumb mode.
(print_insn_arm, print_insn_thumb16, print_insn_thumb32): Use them.
Committed on behalf of Matthew Malcomson:
The SIMD UDOT instruction assembly has an unusual operand that selects a single
32 bit element with the mnemonic 4B.
This unusual mnemonic is handled by a special operand qualifier and associated
qualifier data in `aarch64_opnd_qualifiers`.
The current qualifier data describes 4 1-byte elements with the structure
{1, 4, 0x0, "4b", OQK_OPD_VARIANT}
This makes sense, as the instruction does work on 4 1-byte elements, however
some logic in the `operand_general_constraint_met_p` makes assumptions about
the range of index allowed when selecting a SIMD_ELEMENT depending on element
size.
That function reasons that e.g. in order to select a byte-sized element in a 16
byte V register an index must allow selection of one of the 16 elements and
hence its range will be in [0,15].
This reasoning breaks with the above description of a 4 part selection of 1
byte elements and allows an index outside the valid [0,3] range, triggering an
assert later on in the program in `aarch64_ins_reglane`.
vshcmd: > echo 'udot v0.2s, v1.8b, v2.4b[4]' | ../src/binutils-build/gas/as-new -march=armv8.4-a
as-new: ../../binutils-gdb/opcodes/aarch64-asm.c:134: aarch64_ins_reglane: Assertion `reglane_index < 4' failed.
{standard input}: Assembler messages:
{standard input}:1: Internal error (Aborted).
Please report this bug.
This patch changes the operand qualifier data so that it describes a single
32 bit element.
{4, 1, 0x0, "4b", OQK_OPD_VARIANT}
Hence the calculation in `operand_general_constraint_met_p` provides the
correct answer and the usual error checking machinery is used.
vshcmd: > echo 'udot v0.2s, v1.8b, v2.4b[4]' | ../src/binutils-build/gas/as-new -march=armv8.4-a
{standard input}: Assembler messages:
{standard input}:1: Error: register element index out of range 0 to 3 at operand 3 -- `udot v0.2s,v1.8b,v2.4b[4]'
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds support for the mitigation for Spectre Variant 4 by
adding the PSTATE bit SSBS which are accessible using MSR and MRS
instructions. Although this is a mandatory addition to the ARMv8.5-A,
it is permitted to be added to any version of the ARMv8 architecture.
This is enabled using the command line option of +ssbs for older
versions.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SSBS): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Add
SSBS in the check for one-bit immediate.
(aarch64_sys_regs): New entry for SSBS.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for SSBS.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "ssbs".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/ssbs-illegal1.d: New test.
* testsuite/gas/aarch64/ssbs-illegal1.l: New test.
* testsuite/gas/aarch64/ssbs-illegal2.d: New test.
* testsuite/gas/aarch64/ssbs-illegal2.l: New test.
* testsuite/gas/aarch64/ssbs.s: New test.
* testsuite/gas/aarch64/ssbs1.d: Test with +ssbs
* testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the new system registers SCXTNUM_ELx and ID_PFR2_EL1.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SCXTNUM): New.
(AARCH64_FEATURE_ID_PFR2): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
(aarch64_sys_reg_supported_p): New checks for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test registers
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification)
The Branch Target Identification instructions (BTI) are allocated to
existing HINT space, using HINT numbers 32, 34, 36, 38, such that
bits[7:6] of the instruction identify the compatibility of the BTI
instruction to different branches.
BTI {<targets>}
where <targets> one of the following, specifying which type of
indirection is allowed:
j : Can be a target of any BR Xn isntruction.
c : Can be a target of any BLR Xn and BR {X16|X17}.
jc: Can be a target of any free branch.
A BTI instruction without any <targets> is the strictest of all and
can not be a target of nay free branch.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BTI): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default.
(aarch64_opnd): Add AARCH64_OPND_BTI_TARGET.
(HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to
define HINT #imm values.
(HINT_OPD_JC, HINT_OPD_NULL): Likewise.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
with the hint immediate.
* aarch64-opc.c (aarch64_hint_options): New entries for
c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
while checking for HINT_OPD_F_NOPRINT flag.
* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
extract value.
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
(aarch64_opcode_table): Add entry for BTI.
(AARCH64_OPERANDS): Add new description for BTI targets.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_bti_operand): New.
(process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET.
(parse_operands): Likewise.
* testsuite/gas/aarch64/system.d: Update for BTI.
* testsuite/gas/aarch64/bti.s: New.
* testsuite/gas/aarch64/bti.d: New.
* testsuite/gas/aarch64/illegal-bti.d: New.
* testsuite/gas/aarch64/illegal-bti.l: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the following:
MSR Xn, RNDR
MSR Xn, RNDRRS
These are optional instructions in ARMv8.5-A and hence the new
+rng is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_RNG): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
rndr and rndrrs.
(aarch64_sys_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): New "rng" option.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: Test both instructions.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/dc-data-cache-operation-an-alias-of-sys)
This patch adds the DC CVADP instruction. Since this has a separate
identification mechanism a new feature bit is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CVADP): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): New entry for cvadp.
(aarch64_sys_ins_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test instruction.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the prediction restriction instructions (that is, cfp,
dvp, cpp). These instructions are retrospectively made optional for
all versions of the architecture from ARMv8.0 to ARMv8.4 and is
mandatory from ARMv8.5. Hence adding a new +predres which can be used
by the older architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default.
(aarch64_opnd): Add AARCH64_OPND_SYSREG_SR.
(aarch64_sys_regs_sr): Declare new table.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New.
(parse_operands): Add entry for AARCH64_OPND_SYSREG_SR.
(md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh
with aarch64_sys_regs_sr.
(aarch64_features): Add new "predres" option for older
architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: New.
* testsuite/gas/aarch64/sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.l: New.
* testsuite/gas/aarch64/predres.s: New.
* testsuite/gas/aarch64/predres.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence a new command line option of "+sb" is added for older
architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SB): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "sb" option
for older architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sb.s: New.
* testsuite/gas/aarch64/sb.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the data processing instructions that are new to
ARMv8.5-A.
1) There are 2 instructions: xaflag, axflag, that are added to
manipulate the states of the flag and are used to convert between the
Arm representation and the fcmp representation.
2) The other instructions are rounding instructions which have 8
versions based on whether the floating-point number is a
Single-Precision or Double-Precision number, whether the target
integer is a 32-bit or 64-bit integer and whether the rounding mode is
the ambient rounding mode or to zero. Each of these instruction is
available in both Scalar and Vector forms.
Since both 1) and 2) have separate identification mechanism and it is
permissible that a ARMv8.4 compliant implementation may include any
arbitrary subset of the ARMv8.5 features unless otherwise specified,
new feature bits are added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_FLAGMANIP): New.
(AARCH64_FEATURE_FRINTTS): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_flagmanip): New.
(aarch64_feature_frintts): New.
(FLAGMANIP, FRINTTS): New.
(aarch64_opcode_table): Add entries for xaflag, axflag
and frint[32,64][x,z] instructions.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-dp.s: New.
* testsuite/gas/aarch64/armv8_5-a-dp.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a.
* doc/c-aarch64.texi: Add documentation for the same.
*** include/ChnageLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_5): New.
(AARCH64_ARCH_V8_5): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
Clang doesn't accept {0} as a valid C struct initializer under their implementation
of -Wmissing-field-initializers. This makes using C initializers a bit tricky.
Instead I'm changing the code to use memset instead, which at least GCC inlines and
generates the same code for. This also seems to be the idiom used in binutils for
most targets.
opcodes/
* aarch64-opc.c (verify_constraints): Use memset instead of {0}.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the instruction SB. This instruction is
retrospectively made optional for all versions of the architecture
from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a
new "+sb" for older archtectures.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_SB): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default.
*** opcodes/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (arm_opcodes): Add sb.
(thumb32_opcodes): Likewise.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_sb): New.
(insns): Add new sb instruction.
(arm_extensions): Add "sb".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/sb-bad.d: New test.
* testsuite/gas/arm/sb-bad.l: New test.
* testsuite/gas/arm/sb-thumb1.d: New test.
* testsuite/gas/arm/sb-thumb2.d: New test.
* testsuite/gas/arm/sb.s: New test.
* testsuite/gas/arm/sb1.d: New test.
* testsuite/gas/arm/sb2.d: New test.
Also fix the incorrect definitions of multiply and divide carry and
overflow float.
Changes to the instructions are made in the .cpu file, then we
regenerate the binutils and sim files.
The changes also required a few fixups for tests and additional sim helpers.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU.
(insn-opcode-alu-regreg): Add opcodes for MULD and MULDU.
(l-mul): Fix overflow support and indentation.
(l-mulu): Fix overflow support and indentation.
(l-muld, l-muldu, l-msbu, l-macu): New instructions.
(l-div); Remove incorrect carry behavior.
(l-divu): Fix carry and overflow behavior.
(l-mac): Add overflow support.
(l-msb, l-msbu): Add carry and overflow support.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* or1k-desc.c: Regenerate.
* or1k-desc.h: Regenerate.
* or1k-opc.c: Regenerate.
* or1k-opc.h: Regenerate.
* or1k-opinst.c: Regenerate.
sim/common/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* cgen-ops.h (ADDCFDI): New function, add carry flag DI variant.
(ADDOFDI): New function, add overflow flag DI variant.
(SUBCFDI): New function, subtract carry flag DI variant.
(SUBOFDI): New function, subtract overflow flag DI variant.
sim/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* or1k/cpu.h: Regenerate.
* or1k/decode.c: Regenerate.
* or1k/decode.h: Regenerate.
* or1k/model.c: Regenerate.
* or1k/sem-switch.c: Regenerate.
* or1k/sem.c: Regenerate:
sim/testsuite/sim/or1k/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* div.S: Fix tests to match correct overflow/carry semantics.
* mul.S: Likewise.
gas/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
* testsuite/gas/or1k/allinsn.s: Add instruction tests for
l.muld, l.muldu, l.macu, l.msb, l.msbu.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
This patch adds the new instruction and relocation as per proposal:
https://openrisc.io/proposals/ladrp
This is to be added to the spec in an upcoming revision. The new instruction
l.adrp loads the page offset of the current instruction offset by
a 21-bit immediate shifted left 13-bits. This is meant to be used with
a 13-bit lower bit page offset. This allows us to free up the got
register r16.
l.adrp r3, foo
l.ori r4, r3, po(foo)
l.lbz r5, po(foo)(r3)
l.sb po(foo)(r3), r6
The relocations we add are:
- BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry
asm: plta() implemented using l.ardp, meaning
no need for r16 (the GOT reg)
- BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address
asm: got()
- BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General
asm: tlsgd() Dynamic calculation
- BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local
asm: tlsldm() dynamic calculation
- BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial
asm: gottp() Executable calculation
- BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp
instructions)
- BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation
asm: po() i.e. mem loads, addi etc
- BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation
asm: po() i.e. mem stores, with split immediate
- BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs
asm: gotpo()
- BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs
asm: tlsgdpo()
- BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs
asm: tlsldmpo()
- BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs
asm: gottppo()
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* bfd-in2.h: Regenerated.
* elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for
R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21,
R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21,
R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13,
R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26.
(or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21,
BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26.
(elf_or1k_link_hash_table): Add field saw_plta.
(or1k_final_link_relocate): Add value calculations for new relocations.
(or1k_elf_relocate_section): Add section relocations for new
relocations.
(or1k_write_plt_entry): New function.
(or1k_elf_finish_dynamic_sections): Add support for PLTA relocations
using new l.adrp instruction. Cleanup PLT relocation code generation.
* libbfd.h: Regenerated.
* reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc (parse_disp26): Add support for plta() relocations.
(parse_disp21): New function.
(or1k_rclass): New enum.
(or1k_rtype): New enum.
(or1k_imm16_relocs): Define new PO and SPO relocation mappings.
(parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations.
(parse_imm16): Add support for the new 21bit and 13bit relocations.
* or1korbis.cpu (f-disp26): Don't assume SI.
(f-disp21): New pc-relative 21-bit 13 shifted to right.
(insn-opcode): Add ADRP.
(l-adrp): New instruction.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
* testsuite/gas/or1k/allinsn.s: Add test for l.adrp.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
* testsuite/gas/or1k/reloc-1.s: Add tests to generate
R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13,
R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13
relocations.
* testsuite/gas/or1k/reloc-1.d: Add relocation results for
tests.
* testsuite/gas/or1k/reloc-2.s: Add negative tests for store to
gotpo().
* testsuite/gas/or1k/reloc-2.l: Add expected error test results.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/or1k.exp: Add test cases for plt generation.
* testsuite/ld-or1k/plt1.dd: New file.
* testsuite/ld-or1k/plt1.s: New file.
* testsuite/ld-or1k/plt1.x.dd: New file.
* testsuite/ld-or1k/plta1.dd: New file.
* testsuite/ld-or1k/plta1.s: New file.
* testsuite/ld-or1k/pltlib.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21,
R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13,
R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13,
R_OR1K_SLO13, R_OR1K_PLTA26.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerated.
* or1k-desc.c: Regenerated.
* or1k-desc.h: Regenerated.
* or1k-dis.c: Regenerated.
* or1k-ibld.c: Regenerated.
* or1k-opc.c: Regenerated.
* or1k-opc.h: Regenerated.
* or1k-opinst.c: Regenerated.
This patch adds the following target relocations:
- BFD_RELOC_HI16_S High 16-bit relocation, for used with signed
asm: ha() lower.
- BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local
asm: gotoffha() symbols, for use with signed lower.
- BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial
asm: gottpoffha() executable calculation, for use with signed
lower.
- BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable
asm: tpoffha() variables, for use with signed lower.
- BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with
asm: lo() OpenRISC store instructions.
- BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for
asm: gotofflo() local symbols, used with OpenRISC store
instructions.
- BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local
asm: tpofflo() executable variables, used with OpenRISC store
instructions.
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* bfd-in2.h: Regenerated.
* elf32-or1k.c (N_ONES): New macro.
(or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow.
Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF,
R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16,
R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16,
R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16.
(or1k_reloc_map): Add entries for BFD_RELOC_HI16_S,
BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF,
BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16,
BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16,
BFD_RELOC_OR1K_TLS_LE_SLO16.
(or1k_reloc_type_lookup): Change search loop to start ad index 0 and
also check results before returning.
(or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index
limit.
(or1k_final_link_relocate): New function.
(or1k_elf_relocate_section): Add support for new AHI and SLO
relocations. Use or1k_final_link_relocate instead of generic
_bfd_final_link_relocate.
(or1k_elf_check_relocs): Add support for new AHI and SLO relocations.
* reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16,
BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16,
BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16,
BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16
and BFD_RELOC_OR1K_GOTOFF_LO16.
* libbfd.h: Regenerated.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc: Add RTYPE_ enum.
(INVALID_STORE_RELOC): New string.
(or1k_imm16_relocs): New array array.
(parse_reloc): New static function that just does the parsing.
(parse_imm16): New static function for generic parsing.
(parse_simm16): Change to just call parse_imm16.
(parse_simm16_split): New function.
(parse_uimm16): Change to call parse_imm16.
(parse_uimm16_split): New function.
* or1korbis.cpu (simm16-split): Change to use new simm16_split.
(uimm16-split): Change to use new uimm16_split.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation.
* testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations.
* testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp.
* testsuite/gas/or1k/or1k.exp: Add reloc-2 list test.
* testsuite/gas/or1k/reloc-1.d: New file.
* testsuite/gas/or1k/reloc-1.s: New file.
* testsuite/gas/or1k/reloc-2.l: New file.
* testsuite/gas/or1k/reloc-2.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16,
R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16,
R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/offsets1.d: New file.
* testsuite/ld-or1k/offsets1.s: New file.
* testsuite/ld-or1k/or1k.exp: New file.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerate.
This patch wires in the new constraint verifiers into the assembler and
disassembler. Because of this the MOVPRFX tests have to be split out from the
generic SVE tests into their own tests so warnings can be ignored.
These tests are only intended to test the encoding correctness and not the
constraints.
gas/
* testsuite/gas/aarch64/sve-movprfx.d: New test.
* testsuite/gas/aarch64/sve-movprfx.s: New test.
* testsuite/gas/aarch64/sve.d: Refactor.
* testsuite/gas/aarch64/sve.s: Refactor.
* testsuite/gas/aarch64/sysreg-diagnostic.d: Update.
opcodes/
* aarch64-asm.c (aarch64_opcode_encode): Apply constraint verifier.
* aarch64-dis.c (print_operands): Refactor to take notes.
(print_verifier_notes): New.
(print_aarch64_insn): Apply constraint verifier.
(print_insn_aarch64_word): Update call to print_aarch64_insn.
* aarch64-opc.c (aarch64_print_operand): Remove attribute, update notes format.
This patch adds the verification rules for move prefix constraints.
The Arm SVE instruction MOVPRFX introduces[1] constraints on the instruction at
PC+4. Particularly the following constraints are handled by this patch
* MOVPRFX must be followed by an instruction.
* MOVPRFX can only be followed by non-layout altering directives.
* MOVPRFX destination register MUST be used as the destination register in the
instruction at PC+4, and is not allowed to be used in any other position other than
destructive input. This includes registers that architecturally overlap. e.g. x1
should be treated as z1.
* MOVPRFX must be followed by a restricted set of SVE instructions.
* The size of the destination register of MOVPRFX must be equal to that of
the operation at PC+4.
* The predicate register and operation of MOVPRFX must match that of the instruction
at PC+4
* The predicated instruction at PC+4 must use the merging predicate.
* Architectural aliases and pseudo-instructions need to be supported as well.
* MOVPRFX cannot be the last instruction in a sequence
Any failure to adhere to any of these constrains will emit an assembly warning
and a disassembly note.
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (aarch64_inst): Remove.
(enum err_type): Add ERR_VFI.
(aarch64_is_destructive_by_operands): New.
(init_insn_sequence): New.
(aarch64_decode_insn): Remove param name.
opcodes/
* aarch64-opc.c (init_insn_block): New.
(verify_constraints, aarch64_is_destructive_by_operands): New.
* aarch64-opc.h (verify_constraints): New.
gas/
* config/tc-aarch64.c (output_operand_error_report): Order warnings.
The current verifiers only take an instruction description and encoded value as
arguments. This was enough when the verifiers only needed to do simple checking
but it's insufficient for the purposes of validating instruction sequences.
This patch adds the required arguments and also a flag to allow a verifier to
distinguish between whether it's being run during encoding or decoding. It also
allows for errors and warnings to be returned by a verifier instead of a simple
pass/fail.
include/
* opcode/aarch64.h (struct aarch64_opcode): Expand verifiers to take
more arguments.
opcodes/
* aarch64-dis.c (aarch64_opcode_decode): Update verifier call.
* aarch64-opc.c (verify_ldpsw): Update arguments.
Previously the ERR_ values were defined as different constants, to make this a
bit more type safe and so they can be more easily re-used I'm changing them into
an actual enum and updating any usages.
include/
* opcode/aarch64.h (enum err_type): New.
(aarch64_decode_insn): Use it.
opcodes/
* aarch64-dis.c (ERR_OK, ERR_UND, ERR_UNP, ERR_NYI): Remove.
(aarch64_decode_insn, print_insn_aarch64_word): Use err_type.
This patch introduces aarch64_instr_sequence which is a structure similar to IT
blocks on Arm in order to track instructions that introduce a constraint or
dependency on instruction 1..N positions away from the instruction that opened
the block.
The struct is also wired through to the locations that require it.
gas/
* config/tc-aarch64.c (now_instr_sequence):
(*insn_sequence, now_instr_sequence): New.
(output_operand_error_record, do_encode): Add insn_sequence.
(md_assemble): Update insn_sequence.
(try_to_encode_as_unscaled_ldst, fix_mov_imm_insn, fix_insn):
Pass insn_sequence.
* config/tc-aarch64.h (struct aarch64_segment_info_type):
Add insn_sequence.
include/
* opcode/aarch64.h (struct aarch64_instr_sequence): New.
(aarch64_opcode_encode): Use it.
opcodes/
* aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence.
* aarch64-dis.c (insn_sequence): New.
This patch series is to allow certain instructions such as the SVE MOVPRFX
instruction to apply a constraint/dependency on the instruction at PC+4.
This patch starts this off by marking which instructions impose the constraint
and which instructions must adhere to the constraint. This is done in a
generic way by extending the verifiers.
* The constraint F_SCAN indicates that an instruction opens a sequence and imposes
a constraint on an instructions following it. The length of the sequence depends
on the instruction itself and it handled in the verifier code.
* The C_SCAN_MOVPRFX flag is used to indicate which constrain the instruction is
checked against. An instruction with both F_SCAN and C_SCAN_MOVPRFX starts a
block for the C_SCAN_MOVPRFX instruction, and one with only C_SCAN_MOVPRFX must
adhere to a previous block constraint is applicable.
The SVE instructions in this list have been marked according to the SVE
specification[1].
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (struct aarch64_opcode): Add constraints,
extend flags field size.
(F_SCAN, C_SCAN_MOVPRFX, C_MAX_ELEM): New.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN,
_LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN,
_SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN,
V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize
constraints.
(_SVE_INSNC): New.
(struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize
constraints.
(movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and
F_SCAN flags.
(msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf,
sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech,
sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb,
sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd,
uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub,
uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add
C_SCAN_MOVPRFX and C_MAX_ELEM constraints.
The RISC-V memory model has been ratified, and it includes an additional
fence: "fence.tso". This pseudo instruction extends one of the
previously reserved full fence patterns to be less restrictive, and
therefor will execute correctly on all existing microarchitectures.
Thus there is no reason to allow this instruction to be disabled (or
unconverted to a full fence), so it's just unconditionally allowed.
I've added a test case for GAS to check that "fence.tso" correctly
assembles on rv32i-based targets. I checked to see that "fence.tso"
appears in "gas.log", but that's the only testing I've done.
gas/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* testsuite/gas/riscv/fence-tso.d: New file.
* testsuite/gas/riscv/fence-tso.s: Likewise.
include/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* opcode/riscv-opc.h (MATCH_FENCE_TSO): New define.
(MASK_FENCE_TSO): Likewise.
opcodes/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* riscv-opc.c (riscv_opcodes) <fence.tso>: New opcode.
2018-09-23 Sandra Loosemore <sandra@codesourcery.com>
opcodes/
* nios2-dis.c (nios2_print_insn_arg): Make sure signed conversions
are used when extracting signed fields and converting them to
potentially 64-bit types.
clang gives these errors:
In file included from /Users/simark/src/binutils-gdb/opcodes/csky-dis.c:30:
/Users/simark/src/binutils-gdb/opcodes/csky-opc.h:2330:8: error: missing field 'transfer' initializer [-Werror,-Wmissing-field-initializers]
{NULL}
^
/Users/simark/src/binutils-gdb/opcodes/csky-opc.h:8126:10: error: missing field 'transfer' initializer [-Werror,-Wmissing-field-initializers]
{NULL}
^
They go away when we Initialize all fields. I noticed there used to be some
files built with -Wno-missing-field-initializers, but it's not the case
anymore, since commit e7ae278d04. There is still
a NO_WMISSING_FIELD_INITIALIZERS variable defined in the Makefile, but it's
unused, so I removed it to avoid further confusion.
opcodes/ChangeLog:
* Makefile.am: Remove NO_WMISSING_FIELD_INITIALIZERS.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* configure.ac: Remove check for -Wno-missing-field-initializers.
* csky-opc.h (csky_v1_opcodes): Initialize all fields of last element.
(csky_v2_opcodes): Likewise.
Fix build errors:
cc1: warnings being treated as errors
In file included from .../opcodes/arc-opc.c:2630:
.../opcodes/arc-nps400-tbl.h:38: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:38: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:41: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:41: warning: integer constant is too large for 'long' type
[...]
.../opcodes/arc-nps400-tbl.h:712: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:712: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:715: warning: integer constant is too large for 'long' type
.../opcodes/arc-nps400-tbl.h:715: warning: integer constant is too large for 'long' type
make[4]: *** [arc-opc.lo] Error 1
and:
cc1: warnings being treated as errors
.../gas/config/tc-arc.c: In function 'md_number_to_chars_midend':
.../gas/config/tc-arc.c:802: warning: integer constant is too large for 'long' type
.../gas/config/tc-arc.c:810: warning: integer constant is too large for 'long' type
make[4]: *** [config/tc-arc.o] Error 1
observed with GCC 4.1.2 and presumably other C89 compilers with the
`arc-elf' and `arc-linux-gnu' targets, caused by the use of constants
the values of which are outside the range of the `int' type (or the
`long' type if it is of the same with). In the C89 language standard
such constants are not implicitly converted to a wider type and an
explicit suffix is required for such constants.
Add a `ull' suffix then as with such constants used in other ports.
gas/
* config/tc-arc.c (md_number_to_chars_midend): Append `ull' to
large constants.
opcodes/
* arc-nps400-tbl.h: Append `ull' to large constants throughout.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
2018-09-17 Kito Cheng <kito@andestech.com>
gas/
* testsuite/gas/riscv/bge.d: New.
* testsuite/gas/riscv/bge.s: Likewise.
opcodes/
* riscv-opc.c (riscv_opcodes): Adjust the order of ble and
bleu.
AVX "VMOVQ xmm1, xmm2/m64" and "VMOVQ xmm1/m64, xmm2" can only be
encoded with VEX.128. Set Vex=1 on VEX.128 only vmovq and update
assembler tests.
gas/
PR gas/23665
* testsuite/gas/i386/avx-scalar-intel.d: Updated.
* testsuite/gas/i386/avx-scalar.d: Likewise.
* testsuite/gas/i386/x86-64-avx-scalar-intel.d: Likewise.
* testsuite/gas/i386/x86-64-avx-scalar.d: Likewise.
opcodes/
PR gas/23665
* i386-dis.c (vex_len_table): Update VEX_LEN_0F7E_P_1 and
VEX_LEN_0FD6_P_2 entries.
* i386-opc.tbl: Set Vex=1 on VEX.128 only vmovq.
* i386-tbl.h: Regenerated.
Add VEXWIG, defined as 3, to indicate that the VEX.W/EVEX.W bit is
ignored by such VEX/EVEX instructions, aka WIG instructions. Set
VexW=3 on VEX/EVEX WIG instructions. Update assembler to check
VEXWIG when setting the VEX.W bit.
gas/
PR gas/23642
* config/tc-i386.c (build_vex_prefix): Check VEXWIG when setting
the VEX.W bit.
(build_evex_prefix): Check VEXWIG when setting the EVEX.W bit.
opcodes/
PR gas/23642
* i386-opc.h (VEXWIG): New.
* i386-opc.tbl: Set VexW=3 on VEX/EVEX WIG instructions.
* i386-tbl.h: Regenerated.
Update x86 disassembler to ignore the EVEX.W bit in EVEX vcvt[u]si2s[sd]
instructions in 32-bit mode.
gas/
PR binutils/23655
* testsuite/gas/i386/evex.d: New file.
* testsuite/gas/i386/evex.s: Likewise.
* testsuite/gas/i386/i386.exp: Run evex.
opcodes/
PR binutils/23655
* i386-dis-evex.h (evex_table): Replace Eq with Edqa for
vcvtsi2ss%LQ, vcvtsi2sd%LQ, vcvtusi2ss%LQ and vcvtusi2sd%LQ.
* i386-dis.c (Edqa): New.
(dqa_mode): Likewise.
(intel_operand_size): Handle dqa_mode as m_mode.
(OP_E_register): Handle dqa_mode as dq_mode.
(OP_E_memory): Set shift for dqa_mode based on address_mode.
Just like other insns having byte and word forms, these can also make
use of the W modifier, which at the same time allows simplifying some
other code a little bit.
Various moves come in load and store forms, and just like on the GPR
and FPU sides there would better be only one pattern. In some cases this
is not feasible because the opcodes are too different, but quite a few
cases follow a similar standard scheme. Introduce Opcode_SIMD_FloatD and
Opcode_SIMD_IntD, generalize handling in operand_size_match() (reverse
operand handling there simply needs to match "straight" operand one),
and fix a long standing, but so far only latent bug with when to zap
found_reverse_match.
Also once again drop IgnoreSize where pointlessly applied to templates
touched anyway as well as *word when redundant with Reg*.
2018-08-29 Kito Cheng <kito@andestech.com>
gas/
* config/tc-riscv.c (riscv_subset_supports): New argument:
xlen_required.
(riscv_multi_subset_supports): New function, able to check more
than one extension.
(riscv_ip): Use riscv_multi_subset_supports instead of
riscv_subset_supports.
(riscv_set_arch): Update call-site for riscv_subset_supports.
(riscv_after_parse_args): Likewise.
include/
*opcode/riscv.h (MAX_SUBSET_NUM): New.
(riscv_opcode): Add xlen_requirement field and change type of
subset.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Check XLEN by
riscv_opcode.xlen_requirement.
* riscv-opc.c (riscv_opcodes): Update for struct change.
Partial write %PSR (PWRPSR) is a SPARC V8e option that allows the WRPSR
instruction to only affect the %PSR.ET field. When available it is enabled
by setting the rd field of the WRPSR instruction to a value other than 0.
For Leon processors with support for partial write %PSR (currently GR740
and GR716) the rd value must be 1.
opcodes/ChangeLog:
2018-08-29 Martin Aberg <maberg@gaisler.com>
* sparc-opc.c (sparc_opcodes): Add Leon specific partial write
psr (PWRPSR) instruction.
gas/ChangeLog:
2018-08-29 Daniel Cederman <cederman@gaisler.com>
* testsuite/gas/sparc/leon.d: New test.
* testsuite/gas/sparc/leon.s: New test.
* testsuite/gas/sparc/sparc.exp: Execute the pwrpsr test.
Most optional operands to powerpc instructions use a default value of
zero, but there are a few exceptions. Those have been handled by
PPC_OPERAND_OPTIONAL_VALUE and an entry in the powerpc_operands table
for the default value, smuggled in the shift field. This patch
changes that to using the operand extract function to provide non-zero
defaults.
I've also moved the code determining whether optional operands are
provided or omitted, to the point the first optional operand is seen,
and allowed for the possibility of optional base register operands
in a future patch.
The patch does change the error you get on invalid assembly like
ld 3,4
You'll now see "missing operand" rather than
"syntax error; end of line, expected `('".
gas/
* config/tc-ppc.c (md_assemble): Delay counting of optional
operands until one is encountered. Allow for the possibility
of optional base regs, ie. PPC_OPERAND_PARENS. Call
ppc_optional_operand_value with extra args.
include/
* opcode/ppc.h (struct powerpc_operand): Correct "insert" comment.
Mention use of "extract" function to provide default value.
(PPC_OPERAND_OPTIONAL_VALUE): Delete.
(ppc_optional_operand_value): Rewrite to use extract function.
opcodes/
* ppc-dis.c (operand_value_powerpc): Init "invalid".
(skip_optional_operands): Count optional operands, and update
ppc_optional_operand_value call.
* ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg.
(extract_vlensi): Likewise.
(extract_fxm): Return default value for missing optional operand.
(extract_ls, extract_raq, extract_tbr): Likewise.
(insert_sxl, extract_sxl): New functions.
(insert_esync, extract_esync): Remove Power9 handling and simplify.
(powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE
flag and extra entry.
(powerpc_operands <SXL>): Likewise, and use insert_sxl and
extract_sxl.
Bit manipulation instructions which are not normally generated by the
assembler, should nevertheless be decoded by the disassembler.
opcodes/
* s12z-dis.c: BM_RESERVED1 to behave like BM_OPR_REG, and
BM_RESERVED0 like BM_REG_IMM.
opcodes/
* s12z.h: Delete.
* s12z-dis.c: Adjust path of included file.
include/
* opcode/s12z.h: New file.
gas/
* config/tc-s12z.c: Adjust path of included file.
In 64-bit mode, display eiz for address with the addr32 prefix and without
base nor index registers. For
mov -0xccddef(,%eiz,), %rax
disassembler now displays:
67 48 8b 04 25 11 22 33 ff mov -0xccddef(,%eiz,1),%rax
instead of
67 48 8b 04 25 11 22 33 ff addr32 mov 0xffffffffff332211,%rax
gas/
* testsuite/gas/i386/evex-no-scale-64.d: Updated.
* testsuite/gas/i386/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32-intel.d: Likewise.
* testsuite/gas/i386/ilp32/x86-64-addr32.d: Likewise.
* testsuite/gas/i386/x86-64-addr32.s: Add %eiz tests.
opcodes/
* i386-dis.c (OP_E_memory): In 64-bit mode, display eiz for
address with the addr32 prefix and without base nor index
registers.
There are separate CPUID feature bits for fxsave/fxrstor and cmovCC
instructions. This patch adds CpuCMOV and CpuFXSR to replace Cpu686
on corresponding instructions.
gas/
* config/tc-i386.c (cpu_arch): Add .cmov and .fxsr.
(cpu_noarch): Add nocmov and nofxsr.
* doc/c-i386.texi: Document cmov and fxsr.
opcodes/
* i386-gen.c (cpu_flag_init): Add CpuCMOV and CpuFXSR to
CPU_I686_FLAGS. Add CPU_CMOV_FLAGS, CPU_FXSR_FLAGS,
CPU_ANY_CMOV_FLAGS and CPU_ANY_FXSR_FLAGS.
(cpu_flags): Add CpuCMOV and CpuFXSR.
* i386-opc.tbl: Replace Cpu686 with CpuFXSR on fxsave, fxsave64,
fxrstor and fxrstor64. Replace Cpu686 with CpuCMOV on cmovCC.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
There's no insn allowing ZEROING_MASKING alone. Re-purpose its value for
handling the not uncommon case of insns allowing either form of masking
with register operands, but only merging masking with a memory operand.
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
PowerPC has replaced use of "long" for insns with "int64_t", in
preparation for 64-bit power10 insns.
* ppc-opc.c (insert_sprbat): Correct function parameter and
return type.
(extract_sprbat): Likewise, variable too.
This is a relatively straightforward patch to improve support for the
IBM Gekko and IBM Broadway processors. Broadway is functionally
equivalent to the IBM 750CL, while Gekko's functionality is a subset
of theirs. The patch simplifies this reality and adds -mgekko and
-mbroadway as aliases for -m750cl. I didn't feel it was worth wasting
a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of
simplified mnemonics for special purpose register access. Notably,
Broadway adds 4 additional IBAT and DBAT registers but these are not
assigned sequential SPR numbers.
gas/
* config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway.
* doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* testsuite/gas/ppc/broadway.d,
* testsuite/gas/ppc/broadway.s: New test for broadway.
* testsuite/gas/ppc/ppc.exp: Run new test.
include/
* opcode/ppc.h (PPC_OPCODE_750): Adjust comment.
opcodes/
* ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway.
(powerpc_init_dialect): Handle bfd_mach_ppc_750.
* ppc-opc.c (insert_sprbat, extract_sprbat): New functions to
support disjointed BAT.
(powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR.
(XSPRGQR_MASK, GEKKO, BROADWAY): Define.
(powerpc_opcodes): Add 750cl extended mnemonics for spr access.
Expand Broadcast to 3 bits so that the number of bytes to broadcast
can be computed as 1 << (Broadcast - 1). Use it to simplify x86
assembler.
gas/
* config/tc-i386.c (Broadcast_Operation): Add bytes.
(build_evex_prefix): Use i.broadcast->bytes.
(match_broadcast_size): New function.
(check_VecOperands): Use the broadcast field to compute the
number of bytes to broadcast directly. Set i.broadcast->bytes.
Use match_broadcast_size.
opcodes/
* i386-gen.c (adjust_broadcast_modifier): New function.
(process_i386_opcode_modifier): Add an argument for operands.
Adjust the Broadcast value based on operands.
(output_i386_opcode): Pass operand_types to
process_i386_opcode_modifier.
(process_i386_opcodes): Pass NULL as operands to
process_i386_opcode_modifier.
* i386-opc.h (BYTE_BROADCAST): New.
(WORD_BROADCAST): Likewise.
(DWORD_BROADCAST): Likewise.
(QWORD_BROADCAST): Likewise.
(i386_opcode_modifier): Expand broadcast to 3 bits.
* i386-tbl.h: Regenerated.
Just like for their AVX counterparts and CVTSI2S{D,S}, a memory source
here is ambiguous and hence
- in source files should be qualified with a suitable suffix or operand
size specifier (not doing so is an error in Intel mode, and will gain
a diagnostic in AT&T mode in the future),
- in disassembly should be properly suffixed (the Intel operand size
specifiers were emitted correctly already).
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
The PPA instruction will be emitted by GCC transactional execution
builtins so it needs to be accepted with just -mhtm and without
-march=zEC12.
opcodes/ChangeLog:
2018-07-19 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-opc.txt (PPA): Add the htm flag.
When multiple (here: two) forms of an insn take different width inputs
but produce identical size outputs (here: RegXMM), the templates can be
combined.
Also drop IgnoreSize (and the now redundant size specifiers) wherever
applicable.
These are special because they may not have a register operand to derive
the vector length from, which requires to also deal with the braodcast
case when determining vector length in build_evex_prefix().
Also drop IgnoreSize (and the now redundant size specifiers) from their
suffixed counterparts.
Instead of expanding macro-like constructs in i386-gen, have the C pre-
processor do this for us. Besides being a prerequisite for the next
template folding steps, this also paves the way for removing various
hidden dependencies between #define-s in i386-opc.h and plain literal
numbers used in i386-opc.tbl.
The #undef of None is solely to leave the generated i386-tbl.h entirely
unchanged.
After
commit 1b54b8d7e4
Author: Jan Beulich <jbeulich@novell.com>
Date: Mon Dec 18 09:36:14 2017 +0100
x86: fold RegXMM/RegYMM/RegZMM into RegSIMD
... qualified by their respective sizes, allowing to drop FirstXmm0 at
the same time.
folded RegXMM, RegYMM and RegZMM into RegSIMD, it's no longer impossible
to distinguish if Xmmword can represent a memory reference when operand
specification contains SIMD register. For example, template operands
specification like these
RegXMM|...|Xmmword|...
and
RegXMM|...
The Xmmword bitfield is always set by RegXMM which is represented by
"RegSIMD|Xmmword". This patch splits each of vcvtps2qq, vcvtps2uqq,
vcvttps2qq and vcvttps2uqq into 2 templates: one template only has
RegXMM source operand and the other only has mempry source operand.
gas/
PR gas/23418
* testsuite/gas/i386/xmmword.s: Add tests for vcvtps2qq,
vcvtps2uqq, vcvttps2qq and vcvttps2uqq.
* testsuite/gas/i386/xmmword.l: Updated.
opcodes/
PR gas/23418
* i386-opc.h (Byte): Update comments.
(Word): Likewise.
(Dword): Likewise.
(Fword): Likewise.
(Qword): Likewise.
(Tbyte): Likewise.
(Xmmword): Likewise.
(Ymmword): Likewise.
(Zmmword): Likewise.
* i386-opc.tbl: Split vcvtps2qq, vcvtps2uqq, vcvttps2qq and
vcvttps2uqq.
* i386-tbl.h: Regenerated.
For more details see: https://static.docs.arm.com/ddi0596/a/DDI_0596_ARM_a64_instruction_set_architecture.pdf
opcodes * aarch64-tbl.h (aarch64_opcode_table): Add entry for
ssbb and pssbb and update dsb flags to F_HAS_ALIAS.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
gas * testsuite/gas/aarch64/system.s: Add test for ssbb
and pssbb.
* testsuite/gas/aarch64/system.d: Update accordingly
and remove explicit addresses.
This adds the missing Em16 constraints the rest of the instructions requiring them
and also adds a testcase to test all the instructions so these are checked from
now on.
The Em16 operand constrains the valid registers to the lower 16 registers when used
with a half precision qualifier.
The list has been cross checked (by hand) through the Arm ARM version Ca.
opcodes/
PR binutils/23192
* aarch64-tbl.h (sqdmlal, sqdmlal2, smlsl, smlsl2, sqdmlsl, sqdmlsl2,
mul, smull, smull2, sqdmull, sqdmull2, sqdmulh, sqrdmulh, mla, umlal,
umlal2, mls, umlsl, umlsl2, umull, umull2, sqdmlal, sqdmlsl, sqdmull,
sqdmulh, sqrdmulh): Use Em16.
gas/
PR binutils/23192
* testsuite/gas/aarch64/illegal-by-element.s: New.
* testsuite/gas/aarch64/illegal-by-element.d: New.
* testsuite/gas/aarch64/illegal-by-element.l: New.
See:
https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability/download-the-whitepaper
opcodes * arm-dis.c (arm_opcodes): Add ssbb and pssbb and move
csdb together with them.
(thumb32_opcodes): Likewise.
gas * config/tc-arm.c (insns): Add new ssbb and pssbb instructions.
* testsuite/gas/arm/csdb.s: Add new tests for ssbb and pssbb.
* testsuite/gas/arm/csdb.d: Likewise
* testsuite/gas/arm/thumb2_it_bad.s: Likewise.
* testsuite/gas/arm/thumb2_it_bad.l: Likewise.
* testsuite/gas/arm/barrier.d: Update with ssbb.
* testsuite/gas/arm/barrier-thumb.d: Likewise.
Architecturally, MONITOR's and MONITORX'es memory operand is a 16- or
32-bit register outside of 64-bit mode, and a 64- or 32-bit register
inside 64-bit mode. The other register operands, including all of them
for MWAIT and MWAITX, are uniformly 32-bit, irrespective of mode. Retain
the original 64-bit MONITOR{,X} templates for compatibility only, and
fold the MWAIT{,X} ones.
The checking against reg16_inoutportreg can be had with a simple test of
a bit, and the value setting from inoutportreg can be replaced by using
the actual register's reg_type field.
Note that the so far redundant 2nd instance of OPERAND_TYPE_INOUTPORTREG
is left in place, for its use in type_names[].
With its name it should equal to the largest prior enumerator, which is
not very helpful as that will change every once in a while. Rename it to
OTNum instead to make name and value match, and correct use sites to no
longer use one too large a value.
Remove `-Wshadow' compilation errors:
cc1: warnings being treated as errors
.../opcodes/s12z-dis.c: In function 'lea_reg_xys_opr':
.../opcodes/s12z-dis.c:814: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
.../opcodes/s12z-dis.c: In function 'lea_reg_xys':
.../opcodes/s12z-dis.c:843: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
.../opcodes/s12z-dis.c: In function 'print_insn_loop_primitive':
.../opcodes/s12z-dis.c:2206: error: declaration of 'reg' shadows a global declaration
.../opcodes/s12z-dis.c:783: error: shadowed declaration is here
which for versions of GCC before 4.8 prevent support for S12Z targets
from being built. See also GCC PR c/53066.
opcodes/
* s12z-dis.c (lea_reg_xys_opr): Rename `reg' local variable to
`reg_xys'.
(lea_reg_xys): Likewise.
(print_insn_loop_primitive): Rename `reg' local variable to
`reg_dxy'.
The disassembly mask for ldarh incorrectly didn't mask out bit 20 which
is part of the SBO part of the instruction and shouldn't be considered input.
This fixes the wrong bit fixing the disassembly of instructions to
ldarh and makes the behavior consistent.
opcodes/
PR binutils/23242
* aarch64-tbl.h (ldarh): Fix disassembly mask.
The previous constraints were based on information already in opcodes and it
seems that a few of them were wrong. I have now hand verified the ones changed
by the previous patch and corrected where needed.
This prevents a warning to be issued when one shouldn't be.
opcodes/
PR binutils/23369
* aarch64-opc.c (aarch64_sys_regs): Make read/write csselr_el1,
vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1.
gas/testsuite/
PR binutils/23369
* gas/aarch64/msr.d (csselr_el1,
vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1): New.
* gas/aarch64/msr.s: Likewise.
Implement MIPS target support for passing options to the disassembler,
complementing commit 65b48a8140 ("GDB: Add support for the new
set/show disassembler-options commands.").
This includes options that expect an argument, so adjust the generic
code and data structures used so as to handle such options. So as to
give backends syntax flexibility no specific delimiter has been defined
to separate options from their respective arguments, so it has to be
included as the last character of the option name. Completion code
however has not been adjusted and consequently option arguments cannot
be completed at this time.
Also the MIPS target has non-empty defaults for the options, so that ABI
names for the general-purpose registers respect our `set mips abi ...'
setting rather than always being determined from the ELF headers of the
binary file selected. Handle these defaults as implicit options, never
shown to the user and always prepended to the user-specified options, so
that the latters can override the defaults.
The resulting output for the MIPS target is as follows:
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
no-aliases Use canonical instruction forms.
msa Recognize MSA instructions.
virt Recognize the virtualization ASE instructions.
xpa Recognize the eXtended Physical Address (XPA) ASE
instructions.
ginv Recognize the Global INValidate (GINV) ASE instructions.
gpr-names=ABI Print GPR names according to specified ABI.
Default: based on binary being disassembled.
fpr-names=ABI Print FPR names according to specified ABI.
Default: numeric.
cp0-names=ARCH Print CP0 register names according to specified architecture.
Default: based on binary being disassembled.
hwr-names=ARCH Print HWR names according to specified architecture.
Default: based on binary being disassembled.
reg-names=ABI Print GPR and FPR names according to specified ABI.
reg-names=ARCH Print CP0 register and HWR names according to specified
architecture.
For the options above, the following values are supported for "ABI":
numeric 32 n32 64
For the options above, the following values are supported for "ARCH":
numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600
r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000
r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64
mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e
loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp
(gdb)
which corresponds to what `objdump --help' used to print for the MIPS
target, with minor formatting changes, most notably option argument
lists being wrapped, but also the amount of white space separating
options from the respective descriptions. The relevant part the new
code is now also used by `objdump --help', which means these formatting
changes apply to both outputs, except for argument list wrapping, which
is GDB-specific.
This also adds a separating new line between the heading and option
lists where descriptions are provided, hence:
(gdb) set architecture s390:31-bit
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
esa Disassemble in ESA architecture mode
zarch Disassemble in z/Architecture mode
insnlength Print unknown instructions according to length from first two bits
(gdb)
but:
(gdb) set architecture powerpc:common
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl,
821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300,
e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5,
power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge,
ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe,
spe2, titan, vle, vsx
(gdb)
Existing affected target backends have been adjusted accordingly.
This has been verified manually with:
(gdb) set architecture arm
(gdb) set architecture powerpc:common
(gdb) set architecture s390:31-bit
to cause no issues with the `show disassembler-options' and `set
disassembler-options' commands. A test case for the MIPS target has
also been provided, covering the default settings with ABI overrides as
well as disassembler option overrides.
2018-07-02 Maciej W. Rozycki <macro@mips.com>
Simon Marchi <simon.marchi@polymtl.ca>
include/
PR tdep/8282
* dis-asm.h (disasm_option_arg_t): New typedef.
(disasm_options_and_args_t): Likewise.
(disasm_options_t): Add `arg' member, document members.
(disassembler_options_mips): New prototype.
(disassembler_options_arm, disassembler_options_powerpc)
(disassembler_options_s390): Update prototypes.
opcodes/
PR tdep/8282
* mips-dis.c (mips_option_arg_t): New enumeration.
(mips_options): New variable.
(disassembler_options_mips): New function.
(print_mips_disassembler_options): Reimplement in terms of
`disassembler_options_mips'.
* arm-dis.c (disassembler_options_arm): Adapt to using the
`disasm_options_and_args_t' structure.
* ppc-dis.c (disassembler_options_powerpc): Likewise.
* s390-dis.c (disassembler_options_s390): Likewise.
gdb/
PR tdep/8282
* disasm.h (gdb_disassembler): Add
`m_disassembler_options_holder'. member
* disasm.c (get_all_disassembler_options): New function.
(gdb_disassembler::gdb_disassembler): Use it.
(gdb_buffered_insn_length_init_dis): Likewise.
(gdb_buffered_insn_length): Adjust accordingly.
(set_disassembler_options): Handle options with arguments.
(show_disassembler_options_sfunc): Likewise. Add a leading new
line if showing options with descriptions.
(disassembler_options_completer): Adapt to using the
`disasm_options_and_args_t' structure.
* mips-tdep.c (mips_disassembler_options): New variable.
(mips_disassembler_options_o32): Likewise.
(mips_disassembler_options_n32): Likewise.
(mips_disassembler_options_n64): Likewise.
(gdb_print_insn_mips): Don't set `disassembler_options'.
(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove
functions.
(mips_gdbarch_init): Always set `gdbarch_print_insn' to
`gdb_print_insn_mips'. Set `gdbarch_disassembler_options',
`gdbarch_disassembler_options_implicit' and
`gdbarch_valid_disassembler_options'.
* arm-tdep.c (_initialize_arm_tdep): Adapt to using the
`disasm_options_and_args_t' structure.
* gdbarch.sh (disassembler_options_implicit): New `gdbarch'
method.
(valid_disassembler_options): Switch from `disasm_options_t' to
the `disasm_options_and_args_t' structure.
* NEWS: Document `set disassembler-options' support for the MIPS
target.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
gdb/doc/
PR tdep/8282
* gdb.texinfo (Source and Machine Code): Document `set
disassembler-options' support for the MIPS target.
gdb/testsuite/
PR tdep/8282
* gdb.arch/mips-disassembler-options.exp: New test.
* gdb.arch/mips-disassembler-options.s: New test source.
BFD's bfd_get_mach () function returns a bfd specific value representing
the architecture of the target which is populated from the Tag_CPU_arch
build attribute value of that target. Among other users of that
interfacem, objdump which uses it to print the architecture version of
the binary being examinated and to decide what instruction is available
if run with "-m arm" via its own mapping from bfd_mach_arm_X values to
feature bits available.
However, both BFD and objdump's most recent known architecture is
Armv5TE. When encountering a newer architecture bfd_get_mach will return
bfd_mach_arm_unknown. This is unfortunate since objdump uses that value
to allow all instructions on all architectures which is already what it
does by default, making the "-m arm" trick useless.
This patch updates BFD and objdump's knowledge of Arm architecture
versions up to the latest Armv8-M Baseline and Mainline, Armv8-R and
Armv8.4-A architectures. Since several architecture versions (eg. 8.X-A)
share the same Tag_CPU_arch build attribute value and
bfd_mach_arm values, the mapping from bfd machine value to feature bits
need to return the most featureful feature bits that would yield the
given bfd machine value otherwise some instruction would not disassemble
under "-m arm" mode. The patch rework that mapping to make this clearer
and simplify writing the mapping rules. In particular, for simplicity
all FPU instructions are allowed in all cases.
Finally, the patch also rewrite the cpu_arch_ver table in GAS to use the
TAG_CPU_ARCH_X macros rather than hardcode their value.
2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* archures.c (bfd_mach_arm_5TEJ, bfd_mach_arm_6, bfd_mach_arm_6KZ,
bfd_mach_arm_6T2, bfd_mach_arm_6K, bfd_mach_arm_7, bfd_mach_arm_6M,
bfd_mach_arm_6SM, bfd_mach_arm_7EM, bfd_mach_arm_8, bfd_mach_arm_8R,
bfd_mach_arm_8M_BASE, bfd_mach_arm_8M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entries for above new
bfd_mach_arm values.
* elf32-arm.c (bfd_arm_get_mach_from_attributes): Add Tag_CPU_arch to
bfd_mach_arm mapping logic for pre Armv4 and Armv5TEJ and later
architectures. Force assert failure for any new Tag_CPU_arch value.
gas/
* config/tc-arm.c (cpu_arch_ver): Use symbolic TAG_CPU_ARCH macros
rather than hardcode their values.
ld/
* arm-dis.c (select_arm_features): Fix typo in heading comment. Allow
all FPU features and add mapping from new bfd_mach_arm values to
allowed CPU feature bits.
opcodes/
* testsuite/ld-arm/tls-descrelax-be8.d: Add architecture version in
expected result.
* testsuite/ld-arm/tls-descrelax-v7.d: Likewise.
* testsuite/ld-arm/tls-longplt-lib.d: Likewise.
* testsuite/ld-arm/tls-longplt.d: Likewise.
Some instructions in Armv8-a place a limitation on FP16 registers that can be
used as the register from which to select an element from.
e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction
does not apply for all instructions, e.g. fcmla does not have this restriction
as it gets an extra bit from the M field.
Unfortunately, this restriction to S_H was added for all _Em operands before,
meaning for a large number of instructions you couldn't use the full register
file.
This fixes the issue by introducing a new operand _Em16 which applies this
restriction only when paired with S_H and leaves the _Em and the other
qualifiers for _Em16 unbounded (i.e. using the full 5 bit range).
Also the patch updates all instructions that should be affected by this.
opcodes/
PR binutils/23192
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint.
* aarch64-opc.c (operand_general_constraint_met_p,
aarch64_print_operand): Likewise.
* aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal,
smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl,
fmlal2, fmlsl2.
(AARCH64_OPERANDS): Add Em2.
gas/
PR binutils/23192
* config/tc-aarch64.c (process_omitted_operand, parse_operands): Add
AARCH64_OPND_Em16
* testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper
16 registers.
* testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.s: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
* testsuite/gas/aarch64/sve.d: Likewise.
include/
PR binutils/23192
*opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
This patch fixes a disassembly issue with the aliases to subs with a shifted
register. The subs instruction with the zero register as destination is
supposed to alias to cmp and when the first input register is the zero register
the subs is supposed to be aliased to negs.
This means that a subs with destination and first input registers the zero
register is supposed to be a cmp.
This is done by raising the priority of the cmp alias.
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Fix alias flag for negs
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
gas/
* testsuite/gas/aarch64/addsub.s: Add negs to zero reg test.
* testsuite/gas/aarch64/addsub.d: Likewise.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
Detect illegal FMOV instructions that changes the size from 32 bits to 64
bits and vice versa. Add tests for these and other undefined FMOV
instructions.
PR 20319
gas * testsuite/gas/aarch64/illegal-3.s: Test if unallocated FMOV encodings
are detected as undefined.
* testsuite/gas/aarch64/illegal-3.d: Likewise.
* testsuite/gas/aarch64/illegal.s: Test if FMOV instructions that are
changing the size from 32 bits to 64 bits and vice versa trigger an
error.
* testsuite/gas/aarch64/illegal.l: Likewise.
opcodes * aarch64-tbl.h: Introduce QL_INT2FP_FMOV and QL_FP2INT_FMOV.
(aarch64_opcode_table) : Use QL_INT2FP_FMOV and QL_FP2INT_FMOV.
.../opcodes/xtensa-dis.c: In function ‘print_insn_xtensa’:
.../opcodes/xtensa-dis.c:257:17: error: variable ‘fmt’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
xtensa_format fmt;
^~~
.../opcodes/xtensa-dis.c:262:26: error: variable ‘valid_insn’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
int first, first_slot, valid_insn = 0;
^~~~~~~~~~
* xtensa-dis.c (print_insn_xtensa): Init fmt and valid_insn after
setjmp. Move init for some other vars later too.
xtensa disassembler does not use information from the .xt.prop sections
to switch between code/data disassembly in text sections. This may
result in incorrect disassembly when data is interpreted as code and
disassembler loses synchronization with instruction stream. Use .xt.prop
section information to correctly interpret code and data and synchronize
with instruction stream.
2018-06-04 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (xtensa_read_table_entries): Make global.
(compute_fill_extra_space): Drop declaration. Rename function to
xtensa_compute_fill_extra_space.
(compute_ebb_actions, remove_dead_literal): Update references to
compute_fill_extra_space.
include/
* elf/xtensa.h (xtensa_read_table_entries)
(xtensa_compute_fill_extra_space): New declarations.
opcodes/
* xtensa-dis.c (bfd.h, elf/xtensa.h): New includes.
(dis_private): Add new fields for property section tracking.
(xtensa_coalesce_insn_tables, xtensa_find_table_entry)
(xtensa_instruction_fits): New functions.
(fetch_data): Bump minimal fetch size to 4.
(print_insn_xtensa): Make struct dis_private static.
Load and prepare property table on section change.
Don't disassemble literals. Don't disassemble instructions that
cross property table boundaries.
Bump version number to 2.30.52 since _bfd_link_hide_symbol has been added
to bfd_target.
bfd/
* version.m4: Bump version to 2.30.52
* configure: Regenerated.
binutils/
* configure: Regenerated.
gas/
* configure: Regenerated.
gprof/
* configure: Regenerated.
ld/
* configure: Regenerated.
opcodes/
* configure: Regenerated.
First of all there's no point in having separate Cpu386 templates - the
respective SReg3 registers can't be specified for pre-386 anyway; see
parse_real_register().
And then we can also make use of D here for the memory forms of the
insn. This cannot be done for the non-64bit GPR forms because of the
IgnoreSize that cannot be dropped from the to-SREG variant.
This patch regenerates a number of files that either were edited by
hand or not regenerated when s12z support was added to binutils.
bfd/
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* po/POTFILES.in: Regenerate.
ld/
* po/BLD-POTFILES.in: Regenerate.
opcodes/
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
This patch corrects the disassembly masks for by element dot product
instructions. The bit 10 was wrong and supposed to be 1.
This caused incorrect disassembly of instructions in the unallocated space to
disassemble as dot product instructions.
No encoding errors can arrise from this issue.
opcodes/
PR binutils/23109
* aarch64-tbl.h (aarch64_opcode_table): Correct sdot and udot.
* aarch64-dis-2.c: Regenerate.
This patch adds constraints for read and write only system registers with the
msr and mrs instructions. The code will treat having both flags set and none
set as the same. These flags add constraints that must be matched up. e.g. a
system register with a READ only flag set, can only be used with mrs. If The
constraint fails a warning is emitted.
Examples of the warnings generated:
test.s: Assembler messages:
test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3'
test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0'
test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3'
and disassembly notes:
0000000000000000 <main>:
0: d5130503 msr dbgdtrtx_el0, x3
4: d5130503 msr dbgdtrtx_el0, x3
8: d5330503 mrs x3, dbgdtrrx_el0
c: d5330503 mrs x3, dbgdtrrx_el0
10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register.
Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during
disassembly the constraints are use to disambiguate between the two. An exact
constraint match is always prefered over partial ones if available.
As always the warnings can be suppressed with -w and also be made errors using
warnings as errors.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
gas/
PR binutils/21446
* testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test.
* testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise.
* testsuite/gas/aarch64/sysreg-diagnostic.s: New.
* testsuite/gas/aarch64/sysreg-diagnostic.l: New.
* testsuite/gas/aarch64/sysreg-diagnostic.d: New.
include/
PR binutils/21446
* opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New.
opcodes/
PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).
This patch adds a new platform option "notes" that can be used to indicate if
disassembly notes should be placed in the disassembly as comments.
These notes can contain information about a failing constraint such as reading
from a write-only register. The disassembly will not be blocked because of this
but -M notes will emit a comment saying that the operation is not allowed.
For assembly this patch adds a new non-fatal status for errors. This is
essentially a warning. The reason for not creating an actual warning type is
that this causes the interaction between the ordering of warnings and errors to
be problematic. Currently the error buffer is almost always filled because of
the way operands are matched during assembly. An earlier template may have put
an error there that would only be displayed if no other template matches or
generates a higher priority error. But by definition a warning is lower
priority than a warning, so the error (which is incorrect if another template
matched) will supersede the warning. By treating warnings as errors and only
later relaxing the severity this relationship keeps working and the existing
reporting infrastructure can be re-used.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
* NEWS: Document notes and warnings.
gas/
PR binutils/21446
* config/tc-aarch64.c (print_operands): Indicate no notes.
(output_operand_error_record): Support non-fatal errors.
(output_operand_error_report, warn_unpredictable_ldst, md_assemble):
Likewise.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_operand_error): Add non_fatal.
(aarch64_print_operand): Support notes.
opcodes/
PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.
This patch if the first patch in a series to add the ability to add constraints
to system registers that an instruction must adhere to in order for the register
to be usable with that instruction.
These constraints can also be used to disambiguate between registers with the
same encoding during disassembly.
This patch adds a new flags entry in the sysreg structures and ensures it is
filled in and read out during assembly/disassembly. It also adds the ability for
the assemble and disassemble functions to be able to gracefully fail and re-use
the existing error reporting infrastructure.
The return type of these functions are changed to a boolean to denote success or
failure and the error structure is passed around to them. This requires
aarch64-gen changes so a lot of the changes here are just mechanical.
gas/
PR binutils/21446
* config/tc-aarch64.c (parse_sys_reg): Return register flags.
(parse_operands): Fill in register flags.
gdb/
PR binutils/21446
* aarch64-tdep.c (aarch64_analyze_prologue,
aarch64_software_single_step, aarch64_displaced_step_copy_insn):
Indicate not interested in errors.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct.
(aarch64_decode_insn): Accept error struct.
opcodes/
PR binutils/21446
* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
and take error struct.
* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
aarch64_ins_reglist, aarch64_ins_ldst_reglist,
aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
aarch64_ext_reglist, aarch64_ext_ldst_reglist,
aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
(determine_disassembling_preference, aarch64_decode_insn,
print_insn_aarch64_word, print_insn_data): Take errors struct.
(print_insn_aarch64): Use errors.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-gen.c (print_operand_inserter): Use errors and change type to
boolean in aarch64_insert_operan.
(print_operand_extractor): Likewise.
* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef.
include * opcode/nfp.h: Use uint64_t instead of bfd_vma.
opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
Defining SPE2_OPCD_SEGS as 13 discounts the possibility that we'd
ever look up spe2_opcd_indices[14..16], which I think is possible.
Extend that array to size 16+1, using the macros we use to index the
array. Similarly use the index macros for PPC_OPCD_SEGS and
VLE_OPCD_SEGS.
* ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP.
(VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to
partition opcode space for index lookup.
This patch replaces AddrPrefixOp0 with AddrPrefixOpReg to indicate that
the size of register operand is controlled by the address size prefix.
This will be used by Intel MOVDIRI and MOVDIR64B instructions later.
gas/
* config/tc-i386.c (process_suffix): Check addrprefixopreg
instead of addrprefixop0.
opcodes/
* i386-gen.c (opcode_modifiers): Replace AddrPrefixOp0 with
AddrPrefixOpReg.
* i386-opc.h (AddrPrefixOp0): Renamed to ...
(AddrPrefixOpReg): This.
(i386_opcode_modifier): Rename addrprefixop0 to addrprefixopreg.
* i386-opc.tbl: Replace AddrPrefixOp0 with AddrPrefixOpReg.
This patch fixes an issue where the memory for the opcode structure is not zero'd before
the first exit branch. So there is one failure mode for which uninitialized memory
is returned.
This causes weird failures when the return code is not checked before inst is used.
opcodes/
* aarch64-dis.c (aarch64_opcode_decode): Moved memory clear code.
There's little point carrying up to three templates per insn flavor
when the sole difference is operand size and the dependency on AVX512VL
being enabled. Instead the need for AVX512VL can be derived from an
operand allowing for ZMMword as well as one or both or XMMword and
YMMword (irrespective of whether this is a register or memory operand).
Without further abstraction to deal with the different Disp8MemShift
values between the templates, only a limited set (mostly ones only
allowing for non-memory operands) can be folded, which is being done
here.
Also drop IgnoreSize wherever possible from anything that's being
touched anyway.
All of AVX, LWP, MPX, and PKU require XSAVE, and hence it as well as
XRSTOR should be enabled when enabling these ISA extensions. Leverage
these implications to shorten some of the cpu_flag_init[] entries.
It's not clear to me why they had been introduced - the respective
comments in opcodes/i386-gen.c are certainly wrong: ymm<N> registers
are very well supported (and necessary) with just AVX512F.
Neither 287 wrt 8087 nor 387 wrt 287 are proper supersets - in each case
some insns get removed from the ISA (they become NOPs, but code intended
for newer co-processors should not use them).
Furthermore with .no87, ST should not be recognized as a register name.
Rn is supposed to have a 5 bit range but instead was given 4 bits
causing these instructions to disassemble as unknown instructions.
opcodes/
* aarch64-tbl.h (sqrdmlah, sqrdmlsh): Fix masks.
gas/
* testsuite/gas/aarch64/rdma.s: Test for larger register numbers.
* testsuite/gas/aarch64/rdma.d: Update results.
* testsuite/gas/aarch64/rdma-directive.d: Likewise.