This patch updates the decoding of the VMOV and VMVN instructions which depend on cmode.
Previously VMOV and VMVN with cmode 1101 were not allowed.
The cmode changes also required updating of the MVE conflict checking.
Now instructions with opcodes 0xef800d50 and 0xef800e70 correctly get decoded as VMOV
and VMVN, respectively.
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/arm-dis.c (mve_opcodes): Enable VMOV imm to vec with
cmode 1101.
(is_mve_encoding_conflict): Update cmode conflict checks for
MVE_VMVN_IMM.
2019-11-12 Mihail Ionescu <mihail.ionescu@arm.com>
* gas/config/tc-arm.c (do_neon_mvn): Allow mve_ext cmode=0xd.
* testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.s: New test.
* testsuite/gas/arm/mve-vmov-vmvn-vorr-vbic.d: Likewise.
EsSeg (a per-operand bit) is used with IsString (a per-insn attribute)
only. Extend the attribute to 2 bits, thus allowing to encode
- not a string insn,
- string insn with neither operand requiring use of %es:,
- string insn with 1st operand requiring use of %es:,
- string insn with 2nd operand requiring use of %es:,
which covers all possible cases, allowing to drop EsSeg.
The (transient) need to comment out the OTUnused #define did uncover an
oversight in the earlier OTMax -> OTNum conversion, which is being taken
care of here.
Drop the remaining instances left in place by commit c3949f432f ("x86:
limit ImmExt abuse), now that we have a way to specify specific GPRs.
Take the opportunity and also introduce proper 16-bit forms of
applicable SVME insns as well as 1-operand forms of CLZERO.
Special register "class" instances can't be combined with one another
(neither in templates nor in register entries), and hence it is not a
good use of resources (memory as well as execution time) to represent
them as individual bits of a bit field.
Furthermore the generalization becoming possible will allow
improvements to the handling of insns accepting only individual
registers as their operands.
We should check suffix in instruction mnemonic when matching instruction.
In Intel syntax, normally we check for memory operand size. But the same
mnemonic with 2 different encodings can have the same memory operand
size and i.suffix is set to LONG_DOUBLE_MNEM_SUFFIX from memory operand
size in Intel syntax to distinguish them. When there is no suffix in
mnemonic, we check LONG_DOUBLE_MNEM_SUFFIX in i.suffix for mnemonic
suffix.
gas/
PR gas/25167
* config/tc-i386.c (match_template): Don't check instruction
suffix set from operand.
* testsuite/gas/i386/code16.d: New file.
* testsuite/gas/i386/code16.s: Likewise.
* testsuite/gas/i386/i386.exp: Run code16.
* testsuite/gas/i386/x86-64-branch-4.l: Updated.
opcodes/
PR gas/25167
* i386-opc.tbl: Remove IgnoreSize from cmpsd and movsd.
* i386-tbl.h: Regenerated.
Many operand types, in particular the various kinds of registers, can't
be combined with one another (neither in templates nor in register
entries), and hence it is not a good use of resources (memory as well as
execution time) to represent them as individual bits of a bit field.
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
In this last patch, the new Data Gathering Hint mnemonic is introduced.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* testsuite/gas/aarch64/dgh.s: New test.
* testsuite/gas/aarch64/dgh.d: New test.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcodes/aarch64-tbl.h (V8_6_INSN): New macro for v8.6 instructions.
(aarch64_opcode_table): Add data gathering hint mnemonic.
* opcodes/aarch64-dis-2.c: Account for new instruction.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the arm backend.
The following Matrix Multiply instructions are added: vummla, vsmmla,
vusmmla, vusdot, vsudot[1].
[1]https://developer.arm.com/docs/ddi0597/latest/simd-and-floating-point-instructions-alphabetic-order
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-arm.c (arm_ext_i8mm): New feature set.
(do_vusdot): New.
(do_vsudot): New.
(do_vsmmla): New.
(do_vummla): New.
(insns): Add vsmmla, vummla, vusmmla, vusdot, vsudot mnemonics.
(armv86a_ext_table): Add i8mm extension.
(arm_extensions): Move bf16 extension to context sensitive table.
(armv82a_ext_table, armv84a_ext_table, armv85a_ext_table):
Move bf16 extension to context sensitive table.
(armv86a_ext_table): Add i8mm extension.
* doc/c-arm.texi: Document i8mm extension.
* testsuite/gas/arm/i8mm.s: New test.
* testsuite/gas/arm/i8mm.d: New test.
* testsuite/gas/arm/bfloat17-cmdline-bad-3.d: Update test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/arm.h (ARM_EXT2_I8MM): New feature macro.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* arm-dis.c (neon_opcodes): Add i8mm SIMD instructions.
Regression tested on arm-none-eabi.
Is this ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat' directive for the AArch64 backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function in order
to encode the slightly
different bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on aarch64-none-elf and aarch64-none-linux-gnu
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-29 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-29 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-aarch64.c (md_atof): Add encoding for the bfloat16 format.
* testsuite/gas/aarch64/bfloat16-directive-le.d: New test.
* testsuite/gas/aarch64/bfloat16-directive-be.d: New test.
* testsuite/gas/aarch64/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat16' directive for the Arm backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function (included
in the previous patch) in order to encode the slightly different
bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on arm-none-eabi and arm-none-linux-gnueabihf
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-arm.c (md_atof): Add encoding for bfloat16
* testsuite/gas/arm/bfloat16-directive-le.d: New test.
* testsuite/gas/arm/bfloat16-directive-be.d: New test.
* testsuite/gas/arm/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions).
This patch contains some general refactoring of the atof_ieee
function, exposing a function that allows a higher level of control
over the format of IEEE-like floating point numbers.
This has been done in order to be able to add a directive for assembling
floating point literals in the bfloat16 format in the following patches.
Committed on behalf of Mihail Ionescu.
Tested on arm-none-eabi, arm-none-linux-gnueabihf, aarch64-none-elf
and aarch64-none-linux-gnuwith no issues.
gas/ChangeLog:
2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com>
* as.h (atof_ieee_detail): Add prototype for atof_ieee_detail function.
(atof_ieee): Move some code into the atof_ieee_detail function.
(atof_ieee_detail): Add function that provides a higher level of control over generating
IEEE-like numbers.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces BFloat16 instructions to the arm backend.
The following BFloat16 instructions are added: vdot, vfma{l/t},
vmmla, vfmal{t/b}, vcvt, vcvt{t/b}.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_archs): Add armv8.6-a option.
(cpu_arch_ver): Add TAG_CPU_ARCH_V8 tag for Armv8.6-a.
* doc/c-arm.texi (-march): New armv8.6-a arch.
* config/tc-arm.c (arm_ext_bf16): New feature set.
(enum neon_el_type): Add NT_bfloat value.
(B_MNEM_vfmat, B_MNEM_vfmab): New bfloat16 encoder
helpers.
(BAD_BF16): New message.
(parse_neon_type): Add bf16 type specifier.
(enum neon_type_mask): Add N_BF16 type.
(type_chk_of_el_type): Account for NT_bfloat.
(el_type_of_type_chk): Account for N_BF16.
(neon_three_args): Split out from neon_three_same.
(neon_three_same): Part split out into neon_three_args.
(CVT_FLAVOUR_VAR): Add bf16_f32 cvt flavour.
(do_neon_cvt_1): Account for vcvt.bf16.f32.
(do_bfloat_vmla): New.
(do_mve_vfma): New function to deal with the mnemonic clash between the BF16
vfmat and the MVE vfma in a VPT block with a 't'rue condition.
(do_neon_cvttb_1): Account for vcvt{t,b}.bf16.f32.
(do_vdot): New
(do_vmmla): New
(insns): Add vdot and vmmla mnemonics.
(arm_extensions): Add "bf16" extension.
* doc/c-arm.texi: Document "bf16" extension.
* testsuite/gas/arm/attr-march-armv8_6-a.d: New test.
* testsuite/gas/arm/bfloat16-bad.d: New test.
* testsuite/gas/arm/bfloat16-bad.l: New test.
* testsuite/gas/arm/bfloat16-bad.s: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-2.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-3.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad.d: New test.
* testsuite/gas/arm/bfloat16-neon.s: New test.
* testsuite/gas/arm/bfloat16-non-neon.s: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.d: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.l: New test.
* testsuite/gas/arm/bfloat16-thumb.d: New test.
* testsuite/gas/arm/bfloat16-vfp.d: New test.
* testsuite/gas/arm/bfloat16.d: New test.
* testsuite/gas/arm/bfloat16.s: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_V8_6A, ARM_AEXT2_V8_6A,
ARM_ARCH_V8_6A): New.
* opcode/arm.h (ARM_EXT2_BF16): New feature macro.
(ARM_AEXT2_V8_6A): Include above macro in definition.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (select_arm_features): Update bfd_march_arm_8 with
Armv8.6-A.
(coprocessor_opcodes): Add bfloat16 vcvt{t,b}.
(neon_opcodes): Add bfloat SIMD instructions.
(print_insn_coprocessor): Add new control character %b to print
condition code without checking cp_num.
(print_insn_neon): Account for BFloat16 instructions that have no
special top-byte handling.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
to binutils.
This first patch adds the Armv8.6-A flag to binutils.
No instructions are behind it at the moment.
Commited on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (armv8.6-a): New arch.
* doc/c-aarch64.texi (armv8.6-a): Document new arch.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_6): New.
(AARCH64_ARCH_V8_6): New.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h (ARMV8_6): New macro.
Is it ok for trunk?
Regards,
Mihail
As the comments (here: almost, in the opcode table: fully) correctly
state - all register operands except MONITOR's address one are fixed
at 32 bit size. Don't print 64-bit registers there.
Also adjust x86-64-suffix.d's name such that it wouldn't be identical to
x86-64-rep-suffix.d's, but instead resemble that of its sibling
x86-64-suffix-intel.d.
Alter the sequence of conditions evaluated, without affecting the
overall result. This is going to help subsequent changes (and as a nice
side effect also slightly reduces overall indentation depth).
While doing this take the liberty of simplifying the calculation of the
operand index of the register operand in ShortForm handling.
If the extension is not found in the context sensitive table, the legacy
tables are still checked as a fallback. This is particularly useful for
Armv8.1-M as it enables the use of '.arch_extension' with the 'mve' and
'mve.fp' extensions which are not part of the legacy table.
* config/tc-arm.c (selected_ctx_ext_table) New static variable.
(arm_parse_arch): Set context sensitive extension table based on the
chosen base architecture.
(s_arm_arch_extension): Change to lookup extensions in the new context
sensitive tables.
* gas/testsuite/gas/arm/mve-ext.s: New.
* gas/testsuite/gas/arm/mve-ext.d: New.
* gas/testsuite/gas/arm/mvefp-ext.s: New.
* gas/testsuite/gas/arm/mvefp-ext.d: New.
This is a shorthand for the immediate argument being 0, as described here:
https://developer.arm.com/docs/ddi0596/latest/base-instructions-alphabetic-order/ldraa-ldrab-load-register-with-pointer-authentication
This is because the instructions still have a use with an immediate
argument of 0, unlike loads without the PAC functionality. Currently,
the mnemonics are
LDRAA Xt, [Xn, #<simm10>]!
LDRAB Xt, [Xn, #<simm10>]!
After this patch they become
LDRAA Xt, [Xn {, #<simm10>}]!
LDRAB Xt, [Xn {, #<simm10>}]!
gas * config/tc-aarch64.c (parse_address_main): Accept the omission of
the immediate argument for ldraa and ldrab as a shorthand for the
immediate being 0.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.d: New test.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.s: New test.
* testsuite/gas/aarch64/illegal-ldraa.s: Modified to accept the
writeback form with no offset.
* testsuite/gas/aarch64/illegal-ldraa.s: Removed missing offset
error.
opcodes * aarch64-opc.c (print_immediate_offset_address): Don't print the
immediate for the writeback form of ldraa/ldrab if it is 0.
* aarch64-tbl.h: Updated the documentation for ADDR_SIMM10.
* aarch64-opc-2.c: Regenerated.
Prior to changing the logic in the assembler install tests to make sure
the present defaulting of operand sizes won't get broken. There are a
few anomalies pointed out by this:
- arithmetic insns (add, sub, etc) allow defaulting when their immediate
fits in (signed) 8 bits, but they fail to assemble with larger values,
- mov, other than arithmetic insns, doesn't allow any defaulting,
- movsx/movzx default to byte sources (in AT&T mode), and their special
casing needs to be adjusted first
- bt and friends allow defaulting, while shl and friends don't,
- ambiguous AVX and AVX512 insns don't allow defaulting.
This should ultimately all become consistent (perhaps with the exception
some of the SIMD insns); respective tests will be added to the test
cases here as the issues get addressed.
The flag is used to indicate opcodes which can be switched between byte
and word/dword/qword forms (in a "canonical" way). Obviously it's quite
odd then to see it on insns not allowing for byte operands in the first
place. As a result the opcode bytes need to be adjusted accordingly,
which includes comparisons done in optimize_encoding().
To make re-introduction of such issues less likely have i386-gen
diagnose it (in a generally non-fatal way for now).
If we happen to get the fixed and variable parts of the advance_loc
in different frags, bad things happen when subtracting one from a
fr_fix of zero.
PR 25125
* dw2gencfi.c (output_cfi_insn): Don't allow DW_CFA_advance_loc4
to be placed in a different frag to the rs_cfa.
These can be generated when multiple cfi directives are emitted for an
instruction and the insn frag is closed off between directives, as
happens when listings are enabled. No doubt the advance_loc of zero
could be avoided by backtracking over frags in dw2gencfi.c before
calling cfi_add_advance_loc, but that seems like more work than
cleaning up afterwards as this patch does.
Noticed when looking at the testcase in PR25125.
PR 25125
* dw2gencfi.c (output_cfi_insn): Don't output DW_CFA_advance_loc+0.
* ehopt.c (eh_frame_estimate_size_before_relax): Return -1 for
an advance_loc of zero.
(eh_frame_relax_frag): Translate fr_subtype of 7 to size -1.
(eh_frame_convert_frag): Handle fr_subtype of 7. Abort on
unexpected fr_subtype.
The patch I made for PR12049 didn't test for a "negative" branch
properly. "if (target < address)" ought to have been
"if (target < address + fragP->fr_fix)". Rather than making that
change, this patch adds fragP->fr_fix into address earlier. The patch
also avoids running into a bad interaction with the m68k
md_prepare_relax_scan by returning zero growth immediately, since the
adjusted target expression would result in a zero "aim".
PR gas/25125
PR gas/12049
* write.c (relax_frag): Correct calculation of delta for
positive branches where "stretch" would make the branch
negative. Return zero immediately in that case. Correct
TC_PCREL_ADJUST comment.
Not much to see here, just reduce the number of calls to S_GET_VALUE
and symbol_symbolS in the comparison functions.
* config/tc-xtensa.c (xg_order_trampoline_chain_entry): Don't
call S_GET_VALUE multiple times for a symbol. Rearrange code
so it is obvious what is the primary sort key.
(xg_order_trampoline_chain): Similarly.
Also fixes m68hc1x printf arguments which would have bombed when
compiling on a 32-bit host with --enable-64-bit-bfd.
bfd/
PR 24955
* elf32-arm.c (set_cmse_veneer_addr_from_implib): Use bfd_malloc
rather than xmalloc.
* elf32-m68hc1x.c (reloc_warning): New function.
(elf32_m68hc11_relocate_section): Use it here. Cast bfd_vma values
corresponding to %lx in format strings.
* elf32-nds32.c (nds32_insertion_sort): Use a stack temporary.
gas/
* config/tc-nds32.c (nds32_set_section_relocs): Use relocs and n
parameters rather than equivalent sec->orelocation and
sec->reloc_count. Don't sort for n <= 1. Tidy.
PR 25041
opcodes * avr-dis.c (avr_operand): Fix construction of address for lds/sts
instructions.
gas * testsuite/gas/avr/pr25041.s: New test.
* testsuite/gas/avr/pr25041.d: New test driver.
So far z15 was identified as arch13. After the machine has been
announced we can now add the real name.
gas/ChangeLog:
2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Add z15 as alternate CPU
name.
* doc/as.texi: Add z15 to CPU string list.
* doc/c-s390.texi: Likewise.
opcodes/ChangeLog:
2019-10-08 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Enable z15 as CPU string in the opcode
table.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
First and foremost the EsSeg attribute was misplaced for CMPSD. Then
both it and MOVSD were lacking Dword on both of their operands.
Finally string insns with multiple operands and requiring use of ES:
had the wrong operand number reported in the diagnostic.
The fix for PR12848 introduced an off by one error in the mask, this corrected
the negative overflows but not the positive overflows. As a result the
conditional branch instructions accepted a too wide positive immediate which
resulted in it corrupting the instruction during encoding.
The relocation I believe has been incorrectly named, to be consistent with the
other relocations it should have been named BRANCH21 which is why the masks for
it are confusing.
I've replaced the masks with a function out_of_range_p which should make it
harder to make such mistakes.
The mask for BL/BLX on Armv6t+ is also wrong, the extended range is 25-bits
and so the mask should be checking for 24-bits for positive overflow.
gas/ChangeLog:
PR gas/24991
* config/tc-arm.c (out_of_range_p): New.
(md_apply_fix): Use it in BFD_RELOC_THUMB_PCREL_BRANCH9,
BFD_RELOC_THUMB_PCREL_BRANCH12, BFD_RELOC_THUMB_PCREL_BRANCH20,
BFD_RELOC_THUMB_PCREL_BRANCH23, BFD_RELOC_THUMB_PCREL_BRANCH25
* testsuite/gas/arm/pr24991.d: New test.
* testsuite/gas/arm/pr24991.l: New test.
* testsuite/gas/arm/pr24991.s: New test.
This patch modifies assembler to accept the equivalent sized floating
and signless datatypes for VLDR instruction but as alias for the unsigned version.
gas/ChangeLog:
2019-09-23 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (do_mve_vstr_vldr_RQ): Modify function to allow float
* and signless datatypes for few cases of VLDR instruction.
* testsuite/gas/arm/mve-vldr-bad-3.l: Modify.
* testsuite/gas/arm/mve-vldr-bad-3.s: Likewise.
* testsuite/gas/arm/mve-vstrldr-1.d: Likewise.
* testsuite/gas/arm/mve-vstrldr-1.s: Likewise.
bfd/
* bfd-in.h: Move arm declaraions..
* cpu-arm.h: ..to here, new file..
* coff-arm.h: ..and here, new file..
* elf32-arm.h: ..and here, new file.
* cpu-arm.c: Include cpu-arm.h.
* coff-arm.c: Include cpu-arm.h and coff-arm.h.
* elf32-arm.c: Include cpu-arm.h and elf32-arm.h.
* pe-arm.c: Move function rename defines later.
* pe-arm-wince.c: Likewise and include sysdep.h and bfd.h early.
* bfd-in2.h: Regenerate.
gas/
* config/tc-arm.c: Include cpu-arm.h.
ld/
* emultempl/armelf.em: Include elf32-arm.h.
* emultempl/pe.em: Move func defines later and include coff-arm.h.
This one exposed a bug in tic6x gas, found with inline function
parameter type checking. struct bfd_section and struct bfd_symbol
both have a flags field, so bfd_is_com_section (symbol) compiled OK
when bfd_is_com_section was a macro but didn't special case common
symbols.
bfd/
* bfd-in.h (bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, discarded_section),
(bfd_get_section_limit_octets, bfd_get_section_limit): Delete macros.
* bfd.c (bfd_get_section_limit_octets, bfd_get_section_limit),
(bfd_section_list_remove, bfd_section_list_append),
(bfd_section_list_prepend, bfd_section_list_insert_after),
(bfd_section_list_insert_before, bfd_section_removed_from_list):
New inline functions.
* section.c (bfd_is_und_section, bfd_is_abs_section),
(bfd_is_ind_section, bfd_is_const_section, bfd_section_list_remove),
(bfd_section_list_append, bfd_section_list_prepend),
(bfd_section_list_insert_after, bfd_section_list_insert_before),
(bfd_section_removed_from_list): Delete macros.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment, bfd_section_flags),
(bfd_section_userdata, bfd_is_com_section, bfd_is_und_section),
(bfd_is_abs_section, bfd_is_ind_section, bfd_is_const_section),
(discarded_section): New inline functions.
* bfd-in2.h: Regenerate.
gas/
* config/tc-tic6x.c (tc_gen_reloc): Correct common symbol check.
ld/
* emultempl/xtensaelf.em (xtensa_get_section_deps): Comment.
Use bfd_section_userdata.
(xtensa_set_section_deps): Use bfd_set_section_userdata.
* ldlang.c (lang_output_section_get): Use bfd_section_userdata.
(sort_def_symbol): Likewise, and bfd_set_section_userdata.
(init_os): Use bfd_set_section_userdata.
(print_all_symbols): Use bfd_section_userdata.
* ldlang.h (get_userdata): Delete.
Commit 21df382b91 ("x86: fold SReg{2,3}") went too far: Folding 64-bit
PUSH/POP templates into non-64-bit ones isn't correct, due to the
different operand widths, and hence suffixes permitted. Restore the
separate templates.
Add tests of PUSH/POP with q suffix and %fs/%gs operands to the
testsuite. While doing so also add PUSHF/POPF ones _without_ suffix.
These NEWS entries had been missed when the instructions were added.
gas/ChangeLog:
2019-09-19 Matthew Malcomson <matthew.malcomson@arm.com>
* NEWS: Add SVE2 and TME entries.
I get some spurious changes when running autoconf/automake for various
projects in the tree. This is likely because they were generated using
distro-patched tools last time.
I ran `autoreconf -f` in the various automake projects of the
binutils-gdb tree, and this is the result. The tools I am using have
been compiled from source, from the upstream release.
bfd/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gas/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gold/ChangeLog:
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
ld/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
opcodes/ChangeLog:
* Makefile.in: Re-generate.
* configure: Re-generate.
Generalize opcode arch dependencies so that we can support the
overlapping B extension Zb* subsets.
2019-09-17 Maxim Blinov <maxim.blinov@embecosm.com>
gas/
* config/tc-riscv.c (riscv_multi_subset_supports): Handle
insn_class enum rather than subset char string.
(riscv_ip): Update call to riscv_multi_subset_supports.
include/
* opcode/riscv.h (riscv_insn_class): New enum.
* opcode/riscv.h (struct riscv_opcode): Change
subset field to insn_class field.
opcodes/
* riscv-opc.c (riscv_opcodes): Change subset field
to insn_class field for all instructions.
(riscv_insn_types): Likewise.
This patch adds support for MVE VCTP instruction in assembler.
gas ChangeLog:
2019-09-10 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (M_MNEM_vctp): Add new Mnemonic.
(do_mve_vctp): Add function to encode VCTP instruction.
* testsuite/gas/arm/mve-vctp-bad.d: New test.
* testsuite/gas/arm/mve-vctp-bad.l: Likewise.
* testsuite/gas/arm/mve-vctp-bad.s: Likewise.
* testsuite/gas/arm/mve-vctp.d: Likewise.
* testsuite/gas/arm/mve-vctp.s: Likewise.
This patch make changes to the assembler to encode MVE VMOV instruction "a" same as "b".
a: VMOV<c><q> <Dd>, <Dm>
b: VMOV<c><q>.F64 <Dd>, <Dm>
gas/ChangeLog:
2019-08-30 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (do_neon_mov): Modify "if" statement.
* testsuite/gas/arm/mve-vmov-bad-3.d: New test.
* testsuite/gas/arm/mve-vmov-bad-3.l: Likewise.
* testsuite/gas/arm/mve-vmov-bad-3.s: Likewise.
gas * config/tc-arm.c (parse_neon_mov): Add check to accept vector
register to both the arguments in VMOV instruction.
* testsuite/gas/arm/mve-vmov-1.d: Modify.
* testsuite/gas/arm/mve-vmov-1.s: Likewise.
* testsuite/gas/arm/mve-vorr.d: Likewise.
opcodes * arm-dis.c (mve_opcodes): Add entry for MVE_VMOV_VEC_TO_VEC.
(is_mve_undefined): Add case for MVE_VMOV_VEC_TO_VEC.
(print_insn_mve): Add condition to check Qm==Qn of VORR instruction.
li is a pseudo instruction in RISC-V, it might expand to more than one
instructions if the immediate value can't fit addi or lui, but the
assembler will always using 4-byte instructions during expansion.
For example:
li a0, 0x12345001
will expand into
12345537 lui a0,0x12345
00150513 addi a0,a0,1
but addi could be compress into
0505 addi a0,a0,1
It because load_const use macro_build to emit instructions,
and macro_build call append_insn, and expect it will compress
it if possible, but the fact is append_insn never compress anything,
So this patch redirect the li expansion flow to normal instruction
emission flow via md_assemble, added md_assemblef as an wrapper for
that for easier emit instruction with printf-style argument to build
instruction.
gas/ChangeLog:
* tc-riscv.c (md_assemblef): New.
(load_const) Use md_assemblef instead of macro_build to emit
instructions.
* testsuite/gas/riscv/li32.d: New.
* testsuite/gas/riscv/li32.s: Ditto.
* testsuite/gas/riscv/li64.d: Ditto.
* testsuite/gas/riscv/li64.s: Ditto.
This patch adds support for following CPUs:
Cortex-M35P, Cortex-A77, Cortex-A76AE.
Related specifications can be found at https://developer.arm.com/ip-products/processors.
gas/ChangeLog:
* config/tc-arm.c: New entries for Cortex-M35P, Cortex-A77,
and Cortex-A76AE.
* doc/c-arm.texi: Document new processors.
* testsuite/gas/arm/cpu-cortex-a76ae.d: New test.
* testsuite/gas/arm/cpu-cortex-a77.d: New test.
* testsuite/gas/arm/cpu-cortex-m35p.d: New test.
bfd/ChangeLog:
* cpu-arm.c: New entries for Cortex-M35P, Cortex-A77, Cortex-A76AE.
* atof-generic.c (atof_generic): Do not ignore leading zeros if
they appear after a decimal point.
* testsuite/gas/all/float.s: Extend test to include a number with
a leading decimal point followed by several zeroes.
* testsuite/gas/i386/fp.s: Likewise.
* testsuite/gas/i386/fp.d: Update expected output.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 0.5
.float16 10.2, NaN, 452.09
The floats will always be encoded using the binary16 format as described in the
IEEE 754-2008 standard. There is no need to support Arm's alternative half-precision
format since AArch64 only supports the IEEE format.
gas * config/tc-aarch64.c: Add float16 directive and add "Hh" to
acceptable float characters.
* doc/c-aarch64.texi: Documentation for float16 directive.
* testsuite/gas/aarch64/float16-be.d: New test.
* testsuite/gas/aarch64/float16-le.d: New test.
* testsuite/gas/aarch64/float16.s: New test.
* NEWS: Add NEWS entry.
Related specifications can be found at
https://developer.arm.com/ip-products/processors.
gas * NEWS: Mention the Arm and AArch64 new processors.
* config/tc-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
* doc/c-aarch64.texi: Document new CPUs.
* testsuite/gas/aarch64/cpu-cortex-a34.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a76ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a77.d: New test.
* testsuite/gas/aarch64/nop-asm.s: New test.
bfd * cpu-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
gas/
* config/tc-mips.c (mips_move_labels): Retain ISA mode bit
when moving labels in text segments.
(mips_align): Indicate text mode when aligning labels in
text segments.
* gas/testsuite/gas/mips/insn-isa-mode.d: New test.
* gas/testsuite/gas/mips/insn-isa-mode.s: New test source.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
The tests were failing due to md_atof trying to do word-wise endian
switching on the float16 (for little-endian targets sometimes
multi word values have their word order changed).
However since a float16 is only 1 word wide, it would end up writing
incorrect data, as you cannot switch the word order of just one word.
* config/tc-arm.c (md_atof): Add precision check. Formatting.
This is a change to the first published specifications [1][a] but since there is no hardware
out there that uses the old instructions we do not want to support the old variant.
This changes are done based on the latest published specifications [1][b].
[1] https://developer.arm.com/architectures/cpu-architecture/m-profile/docs/ddi0553/latest/armv81-m-architecture-reference-manual
[a] version bf
[b] version bh
gas * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64.
(po_imm1_or_imm2_or_fail): Marco to check the immediate is either of
48 or 64.
(parse_operands): Add case OP_I48_I64.
(do_mve_scalar_shift1): Add function to encode the MVE shift
instructions with 4 arguments.
* testsuite/gas/arm/mve-shift-bad.l: Modify.
* testsuite/gas/arm/mve-shift-bad.s: Likewise.
* testsuite/gas/arm/mve-shift.d: Likewise.
* testsuite/gas/arm/mve-shift.s: Likewise.
opcodes * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for
cases MVE_SQRSHRL and MVE_UQRSHLL.
(print_insn_mve): Add case for specifier 'k' to check
specific bit of the instruction.
Half precision floating point numbers will be encoded using the IEEE 754
half precision floating point format - 16 bits in total, 1 for sign, 5
for exponent and 10 bits of mantissa.
This patch implements the float16 directive for both the IEEE 754 format
and the Arm alternative format for the Arm backend.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 12.0
.float16 0.23, 433.1, 0.06
The Arm alternative format is almost identical to the IEEE 754 format,
except that it doesn't encode for NaNs or Infinity (instead an exponent
of 0x1F represents a normalized number in the range 65536 to 131008).
The alternative format is documented in the reference manual:
https://static.docs.arm.com/ddi0487/db/DDI0487D_b_armv8_arm.pdf?_ga=2.72318806.49764181.1561632697-999473562.1560847439
Which format is used is controlled by the .float16_format <format>
directive, where if <format> = ieee, then use the IEEE 754
half-precision format else if <format> = alternative, then use the
Arm alternative format
Or the format can be set on the command line via the -mfp16-format
option that has a similar syntax. -mfp16-format=<ieee|alternative>.
This also fixes the format and it cannot be changed by any directives.
Once the format has been set (either by the command line option or a directive) it cannot be changed,
and any attempts to change it (i.e. with the float16_format directive) will result in a warning and the
line being ignored.
For ELF targets the appropriate EABI attribute will be written out at the end of assembling
if the format has been explicitly specified. If no format has been explicitly specified then no
EABI attributes will be written.
If the format is not explicitly specified then any float16 directives are encoding using the IEEE 754-2008
format by default until the format is fixed or changed with the float16_format directive.
gas * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings.
(md_atof): Set precision for float16 type.
(arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative
format.
(set_fp16_format): Parse a float16_format directive.
(arm_parse_fp16_opt): Parse the fp16-format command line option.
(aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute.
* config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to
arm_is_largest_exponent_ok.
(arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function.
* doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format=
* testsuite/gas/arm/float16-bad.d: New test.
* testsuite/gas/arm/float16-bad.l: New test.
* testsuite/gas/arm/float16-bad.s: New test.
* testsuite/gas/arm/float16-be.d: New test.
* testsuite/gas/arm/float16-format-bad.d: New test.
* testsuite/gas/arm/float16-format-bad.l: New test.
* testsuite/gas/arm/float16-format-bad.s: New test.
* testsuite/gas/arm/float16-format-opt-bad.d: New test.
* testsuite/gas/arm/float16-format-opt-bad.l: New test.
* testsuite/gas/arm/float16-le.d: New test.
* testsuite/gas/arm/float16.s: New test.
* testsuite/gas/arm/float16-eabi-alternative-format.d: New test.
* testsuite/gas/arm/float16-eabi-ieee-format.d: New test.
* testsuite/gas/arm/float16-eabi-no-format.d: New test.
* testsuite/gas/arm/float16-eabi.s: New test.
* config/atof-ieee.c (H_PRECISION): Macro for precision of float16
type.
(atof_ieee): Set precision and exponent bits for encoding float16
types.
(gen_to_words): NaN and Infinity encoding for float16.
(ieee_md_atof): Set precision for encoding float16 type.
In order to be able to add/remove insns to/from the middle of these
tests, generalize the patterns for the symbol reference comments of RIP-
relative operands.
Previously GAS would accept .u32, .u16 and .u8 suffixes to the VQ(R)DMLAH and VQ(R)DMLASH
instructions, however the Armv8.1-M Mainline specification states that these functions only
have signed variations (.s32, .s16 and .s8 suffixes).
This is documented here:
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf?_ga=2.143079093.1892401233.1563295591-999473562.1560847439#page=1183
gas * config/tc-arm.c (do_mve_vqdmlah): Use N_S_32 macro.
(do_neon_qrdmlah): Use N_S_32 macro.
* testsuite/gas/arm/mve-vqdmlah-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlah.s: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash.s: Remove unsigned instruction tests.
opcodes * arm-dis.c: Only accept signed variants of VQ(R)DMLAH and VQ(R)DMLASH
instructions.
New instruction are added, and some of them are overlapping. Update
disassembler to correctly recognize them. Introduce nps400 option.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (skip_this_opcode): Check also for 0x07 major opcodes,
and MPY class instructions.
(parse_option): Add nps400 option.
(print_arc_disassembler_options): Add nps400 info.
gas/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/nps400-6.d: Update test.
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it
should have required ELFOSABI_GNU since these flags are already in use
by other OSes. HPUX SHF_HP_TLS in fact has the same value. That
means no place in binutils should test SHF_GNU_MBIND without first
checking OSABI, and SHF_GNU_MBIND should not be set without also
setting OSABI. At least, that's the ideal, but the patch accepts
SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always
set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't
proper without a non-zero OSABI, readelf will display the flag as
LOOS+0 if OSABI isn't set.
The clash with SHF_HP_TLS means that hppa64-linux either has that flag
on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux
users, if there are any, may have noticed that GNU ld since 2017
mysteriously aligned their .tbss sections to a 4k boundary. That was
one consequence of SHF_HP_TLS being blindly interpreted as
SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and
the linux kernel don't care about SHF_HP_TLS I took that flag out of
.tbss for hppa64-linux.
bfd/
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind.
(get_program_header_size): Formatting. Only test SH_GNU_MBIND
when elf_gnu_osabi_mbind is set.
(_bfd_elf_map_sections_to_segments): Likewise.
(_bfd_elf_init_private_section_data): Likewise.
(_bfd_elf_final_write_processing): Update comment.
* elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry.
(elf_backend_special_sections): Define without .tbss for linux.
binutils/
* readelf.c (get_parisc_segment_type): Split off hpux entries..
(get_ia64_segment_type): ..and these..
(get_hpux_segment_type): ..to here.
(get_segment_type): Condition GNU_MBIND on osabi. Use
get_hpux_segment_type.
(get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
(get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
gas/
* config/obj-elf.c (obj_elf_change_section): Don't emit a fatal
error for non-SHF_ALLOC SHF_GNU_MBIND here.
(obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new
gnu_attr param.
(obj_elf_section): Adjust obj_elf_parse_section_letters call.
Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr.
Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi.
(obj_elf_type): Set elf_osabi for ifunc.
* testsuite/gas/elf/section12a.d: xfail msp430 and hpux.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.l: Adjust expected error.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition
SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
The instructions that this change apply to are:
VQDMLADH, VQRDMLADH, VQDMLSDH, VQRDMLSDH
The updated documentation is here: https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf
Fixed this by removing the check for this warning from GAS as well as opcodes.
Added testcases to test that the warning is not generated for the instructions that have a 32-bit element size
and the same source and destination operand. Also fixed tests that would previously check for this warning.
gas * config/tc-arm.c (do_mve_vqdmladh): Remove check for UNPREDICTABLE.
* testsuite/gas/arm/mve-vqdmladh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmladh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmladh.d: New tests.
* testsuite/gas/arm/mve-vqdmladh.s: New tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh.d: New tests.
* testsuite/gas/arm/mve-vqdmlsdh.s: New tests.
opcodes * arm-dis.c (is_mve_unpredictable): Stop marking some MVE
instructions as UNPREDICTABLE.
This patch changes the eBPF CPU description to prefer the register
names %r0 and %r6 instead of %a and %ctx when disassembling. This
matches better with the current practice, vs. cBPF.
It also updates the GAS tests in order to reflect this change.
Tested in a x86_64 host.
cpu/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (h-gpr): when disassembling, use %r0 and %r6 instead of
%a and %ctx.
opcodes/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerated.
gas/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.d: Use %r6 instead of %ctx.
* testsuite/gas/bpf/lddw-be.d: Likewise.
* testsuite/gas/bpf/lddw.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (pe_lcomm_internal): Adapted from tc-i386.c.
(pe_lcomm): Likewise.
(md_pseudo_table): Use pe_lcomm to implement .lcomm.
After some discussion, we've decided to rename the +bitperm feature
flag to +sve2-bitperm, so that it's consistent with the other SVE2
feature flags. The associated internal macros already used
"SVE2_BITPERM", so only the feature flag itself needs to change.
2019-07-19 Richard Sandiford <richard.sandiford@arm.com>
gas/
* doc/c-aarch64.texi: Remame the +bitperm extension to +sve2-bitperm.
* config/tc-aarch64.c (aarch64_features): Likewise.
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sve2-sha3.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2-sm4.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2.d: Likewise.
* testsuite/gas/aarch64/sve2.d: Likewise.
This patch supports using pcrel instructions in TLS code sequences. A
number of new relocations are needed, gas operand modifiers to
generate those relocations, and new TLS optimisation. For
optimisation it turns out that the new pcrel GD and LD sequences can
be distinguished from the non-pcrel GD and LD sequences by there being
different relocations on the new sequence. The final "add ra,rb,13"
on IE sequences similarly needs a new relocation, or as I chose, a
modification of R_PPC64_TLS. On pcrel IE code, the R_PPC64_TLS points
one byte into the "add" instruction rather than being on the
instruction boundary.
GD:
pla 3,z@got@tlsgd@pcrel # R_PPC64_GOT_TLSGD34
bl __tls_get_addr@notoc(z@tlsgd) # R_PPC64_TLSGD and R_PPC64_REL24_NOTOC
edited to IE
pld 3,z@got@tprel@pcrel
add 3,3,13
edited to LE
paddi 3,13,z@tprel
nop
LD:
pla 3,z@got@tlsld@pcrel # R_PPC64_GOT_TLSLD34
bl __tls_get_addr@notoc(z@tlsld) # R_PPC64_TLSLD and R_PPC64_REL24_NOTOC
..
paddi 9,3,z2@dtprel
pld 10,z3@got@dtprel@pcrel
add 10,10,3
edited to LE
paddi 3,13,0x1000
nop
IE:
pld 9,z@got@tprel@pcrel # R_PPC64_GOT_TPREL34
add 3,9,z@tls@pcrel # R_PPC64_TLS at insn+1
ldx 4,9,z@tls@pcrel
lwax 5,9,z@tls@pcrel
stdx 5,9,z@tls@pcrel
edited to LE
paddi 9,13,z@tprel
nop
ld 4,0(9)
lwa 5,0(9)
std 5,0(9)
LE:
paddi 10,13,z@tprel
include/
* elf/ppc64.h (R_PPC64_TPREL34, R_PPC64_DTPREL34),
(R_PPC64_GOT_TLSGD34, R_PPC64_GOT_TLSLD34),
(R_PPC64_GOT_TPREL34, R_PPC64_GOT_DTPREL34): Define.
(IS_PPC64_TLS_RELOC): Include new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL34, BFD_RELOC_PPC64_DTPREL34),
(BFD_RELOC_PPC64_GOT_TLSGD34, BFD_RELOC_PPC64_GOT_TLSLD34),
(BFD_RELOC_PPC64_GOT_TPREL34, BFD_RELOC_PPC64_GOT_DTPREL34),
(BFD_RELOC_PPC64_TLS_PCREL): New pcrel tls relocs.
* elf64-ppc.c (ppc64_elf_howto_raw): Add howtos for pcrel tls relocs.
(ppc64_elf_reloc_type_lookup): Translate pcrel tls relocs.
(must_be_dyn_reloc, dec_dynrel_count): Add R_PPC64_TPREL64.
(ppc64_elf_check_relocs): Support pcrel tls relocs.
(ppc64_elf_tls_optimize, ppc64_elf_relocate_section): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Map "tls@pcrel", "got@tlsgd@pcrel",
"got@tlsld@pcrel", "got@tprel@pcrel", and "got@dtprel@pcrel".
(fixup_size, md_assemble): Handle pcrel tls relocs.
(ppc_force_relocation, ppc_fix_adjustable): Likewise.
(md_apply_fix, tc_gen_reloc): Likewise.
ld/
* testsuite/ld-powerpc/tlsgd.d,
* testsuite/ld-powerpc/tlsgd.s,
* testsuite/ld-powerpc/tlsie.d,
* testsuite/ld-powerpc/tlsie.s,
* testsuite/ld-powerpc/tlsld.d,
* testsuite/ld-powerpc/tlsld.s: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
This little patch adds support to the eBPF port of GAS for a few data
directives. The names for the directives have been chosen to be
coherent with the suffixes used in eBPF instructions: b, h, w and dw
for 8, 16, 32 and 64-bit values respectively.
Documentation and tests included.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_pseudo_table): .half, .word and .dword.
* testsuite/gas/bpf/data.s: New file.
* testsuite/gas/bpf/data.d: Likewise.
* testsuite/gas/bpf/data-be.d: Likewise.
* testsuite/gas/bpf/bpf.exp: Run data and data-be.
* doc/c-bpf.texi (BPF Directives): New section.
Once operand parsing has completed, the simpler check of Operand_Mem can
be used in places where i.types[] got passed to operand_type_check().
Note that this has shown a couple of omissions of adjusting i.flags[]
when playing with i.op[] / i.types[] / i.tm.operand_types[]. Not all of
them get added here, just all of the ones needed in process_operands().
... instead of an operand type bit: It's an insn property, not an
operand one. There's just one actual change to be made to the
templates: Most are now required to have the (unswapped) destination go
into ModR/M.rm, so VMOVD template needs its opcode adjusted accordingly
and its operands swapped. {,V}MOVS{S,D}, otoh, are left alone in this
regard, as otherwise generated code would differ from what we've been
producing so far (which I don't think is wanted).
Take the opportunity and add a missing IgnoreSize to pextrb (leading to
an error in 16-bit mode), and take the liberty to once again drop stray
IgnoreSize attributes from lines changed and neighboring related ones.
They're the only exception to there generally being no mix of register
kinds possible in an insn operand template, and there being two bits per
operand for their representation is also quite wasteful, considering the
low number of uses. Fold both bits and deal with the little bit of
fallout.
Also take the liberty and drop dead code trying to set REX_B: No segment
register has RegRex set on it.
Additionally I was quite surprised that PUSH/POP with the permitted
segment registers is not covered by the test cases. Add the missing
pieces.
This patch fixes the eBPF CPU description in order to reflect the
right explicit arguments passed to the ldabs{b,h,w,dw} instructions,
updates the corresponding GAS tests, and updates the BPF section of
the GAS manual.
cpu/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlabs): New pmacro.
(dlind): Likewise.
opcodes/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
gas/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: ldabs instructions do not take a `src'
register as an argument.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
* doc/c-bpf.texi (BPF Opcodes): Update to reflect the correct
explicit arguments to ldabs and ldind instructions.
The eBPF non-generic load instructions ldind{b,h,w,dw} and
ldabs{b,h,w,dw} do not take an explicit destination register as an
argument. Instead, they put the loaded value in %r0, implicitly.
This patch fixes the CPU BPF description to not expect a 'dst'
argument in these arguments, regenerates the corresponding files in
opcodes, and updates the impacted GAS tests.
Tested in a x86-64 host.
cpu/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlsi): ldabs and ldind instructions do not take an
explicit 'dst' argument.
opcodes/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
gas/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: Do not use explicit arguments for
ldabs and ldind instructions.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
git commit f2d4ba38f5 caused many failures for mips-sgi-irix targets,
and added a new test that failed for aarch64, nds32, and rl78.
The mips failures are due to BSF_OBJECT being set in many cases for
symbols by the mips .global/.globl directive. This patch removes that
code and instead sets BSF_OBJECT in a target frob_symbol function,
also moving the mips hacks in elf_frob_symbol to the new function.
Note that common symbols are handled fine in elf.c:swap_out_syms
without needing to set BSF_OBJECT, so that old code can disappear.
* config/obj-elf.c (elf_frob_symbol): Remove mips hacks.
* config/tc-mips.h (tc_frob_symbol): Define.
(mips_frob_symbol): Declare.
* config/tc-mips.c (s_mips_globl): Don't set BSF_OBJECT for irix.
(mips_frob_symbol): Fudge symbols for irix here.
* testsuite/gas/elf/type-2.e: Allow random target symbols.
From Kito Cheng <kito.cheng@sifive.com>
gas/ChangeLog
* doc/c-riscv.texi (Instruction Formats): Add r4 type.
* testsuite/gas/riscv/insn.d: Add testcase for r4 type.
* testsuite/gas/riscv/insn.s: Ditto.
* doc/c-riscv.texi (Instruction Formats): Add b and j type.
* testsuite/gas/riscv/insn.d: Add test case for b and j type.
* testsuite/gas/riscv/insn.s: Ditto.
* testsuite/gas/riscv/insn.s: Correct instruction type for load
and store.
* testsuite/gas/riscv/insn.d: Using regular expression to match
address.
* doc/c-riscv.texi (Instruction Formats): Fix encoding table for SB
type and fix typo.
opcode/ChangeLog
* riscv-opc.c (riscv_insn_types): Add r4 type.
* riscv-opc.c (riscv_insn_types): Add b and j type.
* opcodes/riscv-opc.c (riscv_insn_types): Remove incorrect
format for sb type and correct s type.
For another patch I wanted to use a sufficiently benign option (simply
to be able to specify one, which certain test case invocations require),
and I stumbled across -Q in the --help output. Before realizing that
this is x86-specific anyway, I've tried and and ran into a mysterious
testsuite failure, until I further realized that other than the help
text suggests the option requires an argument. Correct the help text,
and make the implementation actually match what the comment there has
been describing (and what the help text now says).
Recently a patch was submitted for a Xen Project test harness binary to
override the compiler specified @object to @func (see [1]). In a reply I
suggested we shouldn't make ourselves dependent on currently unspecified
behavior of gas here: It accumulates all requests, and then
bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes
certain flags over others.
Make the behavior predictable: Generally the last .type is what counts.
Exceptions are directives which set multiple bits (TLS, IFUNC, and
UNIQUE): Subsequent directives requesting just the more generic bit
(i.e. FUNC following IFUNC) won't clear the more specific one. Warn
about incompatible changes, except from/to STT_NOTYPE.
Also add a new target hook, which hppa wants to use right away afaict.
In the course of adding the warning I ran into two ld testsuite
failures. I can only assume that it was a copy-and-paste mistake that
lead to the same symbol having its type set twice.
[1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
For example, when provided with the (incorrect) instruction
st4 {v0.16b-v3.16b}[4],[x0]
currently assembler provides the following error message
"Error: comma expected between operands at operand 2 -- `st4 {v0.16b-v3.16b}[4],[x0]'".
This was due to the assembler consuming the {v0.16b-v3.16b} as the first operand leaving
[4],[x0] as what it believed to be the second operand.
The actual error is that the first operand should be of element type and not
vector type (as provided). The new diagnostic for this error is
"Error: expected element type rather than vector type at operand 1 -- `st4 {v0.16b-v3.16b}[4],[x0]'.
Added testcases to check for the correct diagnostic message as well as checking that
variations of the structural load/store by element instruction also generate the error
when they have the same problem.
* config/tc-aarch64.c (parse_operands): Add error check.
* testsuite/gas/aarch64/diagnostic.l: New test.
* testsuite/gas/aarch64/diagnostic.s: New test.
* testsuite/gas/aarch64/illegal.l: New tests.
* testsuite/gas/aarch64/illegal.s: New tests.
The entry for the FMOV alias of FCPY was missing C_SCAN_MOVPRFX.
(The entry for FCPY itself was OK.)
This was the only /m-predicated instruction I could see that was
missing the flag.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_SCAN_MOVPRFX for the
SVE FMOV alias of FCPY.
gas/
* testsuite/gas/aarch64/sve-movprfx_27.s,
* testsuite/gas/aarch64/sve-movprfx_27.d: New test.
SVE FCVTZS, FCVTZU, SCVTF and UCVTF need the same treatment as FCVT:
the register size used in a predicated MOVPRFX must be the wider of
the destination and source sizes.
Since I was adding a (supposedly) complete set of tests for converts,
it seemed more consistent to add a complete set of tests for shifts
as well, even though there's no bug to fix there.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Add C_MAX_ELEM flags
to SVE fcvtzs, fcvtzu, scvtf and ucvtf entries.
gas/
* testsuite/gas/aarch64/sve-movprfx_26.s: Also test FCVTZS, FCVTZU,
SCVTF, UCVTF, LSR and ASR.
* testsuite/gas/aarch64/sve-movprfx_26.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_26.l: Likewise.
One of the MOVPRFX tests has:
output register of preceding `movprfx' used as input at operand 3 -- `cpy z1.d,p1/m,x1'
But X1 and Z1 are not the same register, so the instruction is
actually OK.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-opc.c (verify_constraints): Skip GPRs when scanning the
registers in an instruction prefixed by MOVPRFX.
gas/
* testsuite/gas/aarch64/sve-movprfx_25.s: Allow CPY Z1.D.P1/M,X1
to be prefixed by MOVPRFX.
* testsuite/gas/aarch64/sve-movprfx_25.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_25.l: Likewise.
PR 24748
* write.c (create_note_reloc): Add desc2_offset parameter. Change
name of offset parameter to note_offset. Only use desc2_offset
when placing addend into REL reloc's address space.
(maybe_generate_build_notes): Update parameters passed to
create_note_reloc.
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
It is pretty wasteful to have a per-operand flag which is used in
exactly 4 cases. It can be relatively easily replaced, and by doing so
I've actually found some dead code to remove at the same time (there's
no case of ImmExt set at the same time as Vec_Imm4).
In quite a few cases ImmExt gets used when there's not really any
immediate, but rather a degenerate ModR/M byte. ENCL{S,U} show how this
case is supposed to be dealt with. Eliminate most abuses, leaving in
place (for now) only ones where process_immext() is involved.
It seems to be not uncommon for people to use AND or OR in this form for
just setting the status flags. TEST, which doesn't write to any
register other than EFLAGS, ought to be preferred. Make the change only
for -O2 and above though, at least for now.
When they're in the 0F opcode space, swapping their source operands may
allow switching from 3-byte to 2-byte VEX prefix encoding. Note that NaN
behavior precludes us doing so for many packed and scalar floating point
insns; such an optimization would need to be done by the compiler
instead in this case, when it knows that NaN-s have undefined behavior
anyway.
While for explicitly specified AVX/AVX2 insns the optimization (for now
at least) gets done only for -O2 and -Os, it is utilized by default in
SSE2AVX mode, as there we're re-writing the programmer's specified insns
anyway.
Rather than introducing a new attribute flag, the change re-uses one
which so far was meaningful only for EVEX-encoded insns.
This implication allows to simplify some conditionals, thus slightly
improving performance. This change also paves the way for re-using
StaticRounding for non-EVEX insns.
As long as there's no write mask as well as no broadcast, and as long
as the scaled Disp8 wouldn't result in a shorter EVEX encoding, encode
VPAND{D,Q}, VPANDN{D,Q}, VPOR{D,Q}, and VPXOR{D,Q} acting on only the
lower 16 XMM/YMM registers using their VEX equivalents with -O1.
Also take the opportunity and avoid looping twice over all operands
when dealing with memory-with-displacement ones.
While the ISA extensions doc suggests them to be made available just
like the SDM does for the PCLMULQDQ ISA extension, these weren't added
when supposrt for the new extension was introduced.
Also make sure the 64-bit non-AVX512 test actually tests VEX encodings,
not EVEX ones.
For example, this code is invalid:
smc #0x6951
The code would previously check for and encode for up to 16 bit immediate values, however
this immediate should instead be only a 4 bit value
(as documented herehttps://static.docs.arm.com/ddi0406/c/DDI0406C_C_arm_architecture_reference_manual.pdf ).
Fixed this by adding range checks in the relevant areas and also removing code that would
encode more than the first 4 bits of the immediate (code that is now redundant, as any immediate operand
larger than 0xF would error now anyway).
gas * config/tc-arm.c (do_smc): Add range check for immediate operand.
(do_t_smc): Add range check for immediate operand. Remove
obsolete immediate encoding.
(md_apply_fix): Fix range check. Remove obsolete immediate encoding.
* testsuite/gas/arm/arch6zk.d: Fix test.
* testsuite/gas/arm/arch6zk.s: Fix test.
* testsuite/gas/arm/smc-bad.d: New test.
* testsuite/gas/arm/smc-bad.l: New test.
* testsuite/gas/arm/smc-bad.s: New test.
* testsuite/gas/arm/thumb32.d: Fix test.
* testsuite/gas/arm/thumb32.s: Fix test.
These encodings aren't valid in real and VM86 modes, but they are very
well usable in 16-bit protected mode.
A few adjustments in the disassembler tables are needed where Ev or Gv
were wrongly used. Additionally an adjustment is needed to avoid
printing "addr32" when that's already recognizable by the use of %eiz.
Furthermore the Iq operand template was wrong for XOP:0Ah encoding
insns: They're having a uniform 32-bit immediate. Drop Iq and introduce
Id instead.
Clone a few existing test cases to exercise assembler and disassembler.
Noticed by a customer while looking at a tangentially related problem. The
gas testsuite for xstormy16 has two scripts that have a typo on the first
line, they are missing the !. They also use shell syntax that doesn't work
on a system where /bin/sh is dash. So I fixed the typo, changed the shell
to bash, and made them executable, so that they now work when run directly
even if /bin/sh is dash.
gas/
* testsuite/gas/xstormy16/allinsn.sh: Change first line to
#!/bin/bash and make it executable.
* testsuite/gas/xstormy16/gcc.sh: Likewise.
When MTHC1 instruction is paired with MTC1 to write a value to a
64-bit FPR, the MTC1 must be executed first, because the semantic
definition of MTC1 is not aware that software will be using an MTHC1
to complete the operation, and sets the upper half of the 64-bit FPR
to an UNPREDICTABLE value[1].
Fix the order of MTHC1 and MTC1 instructions in LI macro expansion.
Modify the expansions to exploit moves from $zero directly by-passing
the use of $AT, where ever possible.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Wave Computing, Inc., Document
Number: MD00086, Revision 5.04, December 11, 2013, Section 3.2
"Alphabetical List of Instructions", pp. 217.
gas/
* config/tc-mips.c (macro) <M_LI>: Re-order MTHC1 with
respect to MTC1 and use $0 for either part where possible.
* testsuite/gas/mips/li-d.s: Add test cases for non-zero
words in double precision constants.
* testsuite/gas/mips/li-d.d: Update reference output.
* testsuite/gas/mips/micromips@isa-override-1.d: Likewise.
* testsuite/gas/mips/mips32r2@isa-override-1.d: Likewise.
* testsuite/gas/mips/mips64r2@isa-override-1.d: Likewise.
For quite some time we've been using combinations of bits for
specifying various registers in operands and templates. I think it was
Alan who had indicated that likely the debug printing would need
adjustment as a result. Here we go.
Accumulator handling for GPRs gets changed to match that for FPU regs.
For this to work, OPERAND_TYPE_ACC{32,64} get repurposed, with their
original uses replaced by direct checks of the two bits of interest,
which is cheaper than operand_type_equal() invocations.
For SIMD registers nothing similar appears to be needed, as respective
operands get stripped from the (copy of the) template before pt() is
reached.
The type change on pi() is to silence a compiler diagnostic. Arguably
its other parameter could also be const-qualified.
MOVNTI was wrongly assembled with a 66h prefix. Add IgnoreSize to
address this. It and the scalar to/from integer conversion insns also
were also wrongly using Ev / Gv, leading to 16-bit register names being
printed when 32-bit ones were meant.
Clone the 32-bit SSE2 test to cover both assembler and disassembler.
This patch corrects ppc rs_align_code handling to choose the alignment
nops based on the machine in force at the alignment directive rather
than the machine at the end of file.
* config/tc-ppc.h (ppc_nop_select): Declare.
(NOP_OPCODE): Define.
* config/tc-ppc.c (ppc_elf_end, ppc_xcoff_end): Zero ppc_cpu.
(ppc_nop_encoding_for_rs_align_code): New enum.
(ppc_nop_select): New function.
(ppc_handle_align): Don't use ppc_cpu here. Get nop type from frag.
* testsuite/gas/ppc/groupnop.d,
* testsuite/gas/ppc/groupnop.s: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
If VEX.vvvv and EVEX.vvvv are reserved, they must be all 1s, which are
all 0s in inverted form. Add check for unused VEX.vvvv and EVEX.vvvv
when disassembling VEX and EVEX instructions.
gas/
PR binutils/24626
* testsuite/gas/i386/disassem.s: Add tests for reserved VEX.vvvv
and EVEX.vvvv.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24626
* i386-dis.c (print_insn): Check for unused VEX.vvvv and
EVEX.vvvv when disassembling VEX and EVEX instructions.
(OP_VEX): Set vex.register_specifier to 0 after readding
vex.register_specifier.
(OP_Vex_2src_1): Likewise.
(OP_Vex_2src_2): Likewise.
(OP_LWP_E): Likewise.
(OP_EX_Vex): Don't check vex.register_specifier.
(OP_XMM_Vex): Likewise.
This fixes a bug reported on the riscv.org sw-dev mailing list. This
rejects "lui x1,symbol", as a symbol should only be accepted here when
used inside %hi(). Without the fix, this gets assembled as "lui x1,0"
with no relocation which is clearly wrong.
gas/
* config/tc-riscv.c (riscv_ip) <'u'>: Move O_constant check inside if
statement. Delete O_symbol and O_constant check after if statement.
* testsuite/gas/riscv/auipc-parsing.s: Test lui with missing %hi.
* testsuite/gas/riscv/auipc-parsing.l: Update.
For AVX512 instructions with Disp8ShiftVL and Broadcast, we may need to
add CheckRegSize to check if broadcast matches the destination register
size.
gas/
PR gas/24625
* testsuite/gas/i386/inval-avx512f.s: Add tests for AVX512_BF16
instructions with invalid broadcast.
* testsuite/gas/i386/x86-64-inval-avx512f.s: Likewise.
* testsuite/gas/i386/inval-avx512f.l: Updated.
* testsuite/gas/i386/x86-64-inval-avx512f.l: Likewise.
opcodes/
PR gas/24625
* i386-opc.tbl: Add CheckRegSize to AVX512_BF16 instructions with
Disp8ShiftVL.
* i386-tbl.h: Regenerated.
Targets that lack ppc64 support were failing the new prefix-reloc
test. This patch adds some test infrastructure to deal with that, and
changes the powerpc gas usage info so that "-a64" is omitted when
unsupported.
I've been meaning to break up the usage message for a long time;
While doing so causes translators some work now, it should make it
easier next time a new powerpc option is added.
* config/tc-ppc.c (is_ppc64_target): New function.
(md_show_usage): Split up usage message. Don't show -a64 when
unsupported.
testsuite/gas/ppc/ppc.exp (supports_ppc64): New.
(prefix-reloc): Only run for ppc64.
Allow st_other values such as STO_AARCH64_VARIANT_PCS to be set for alias
symbols independently. This is needed for ifunc symbols which are
aliased to the resolver using .set and don't expect resolver attributes
to override the ifunc symbol attributes. This means .variant_pcs must be
added explicitly to aliases.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_elf_copy_symbol_attributes): Define.
* config/tc-aarch64.h (aarch64_elf_copy_symbol_attributes): Declare.
(OBJ_COPY_SYMBOL_ATTRIBUTES): Define.
* testsuite/gas/aarch64/symbol-variant_pcs-3.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-3.s: New test.
In ELF objects the specified symbol is marked with STO_AARCH64_VARIANT_PCS.
gas/ChangeLog:
* config/tc-aarch64.c (s_variant_pcs): New function.
* doc/c-aarch64.texi: Document .variant_pcs.
* testsuite/gas/aarch64/symbol-variant_pcs-1.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-1.s: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.s: New test.
This patch adds initial 64-bit insn assembler/disassembler support.
The only instruction added is "pnop" along with the automatic aligning
of prefix instruction so they do not cross 64-byte boundaries.
include/
* dis-asm.h (WIDE_OUTPUT): Define.
* opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare.
(PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX),
(PPC_PREFIX_P, PPC_PREFIX_SEG): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "future" entry.
(PREFIX_OPCD_SEGS): Define.
(prefix_opcd_indices): New array.
(disassemble_init_powerpc): Initialize prefix_opcd_indices.
(lookup_prefix): New function.
(print_insn_powerpc): Handle 64-bit prefix instructions.
* ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK),
(PMRR, POWERXX): Define.
(prefix_opcodes): New instruction table.
(prefix_num_opcodes): New constant.
binutils/
* objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes.
(struct insn_label_list): New.
(insn_labels, free_insn_labels): New variables.
(ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs.
(ppc_frob_label, ppc_new_dot_label): Move functions earlier in file
and call ppc_record_label.
(md_assemble): Handle 64-bit prefix instructions. Align labels
that are on the same line as a prefix instruction.
* config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to
later in the file.
(md_start_line_hook): Define.
(ppc_start_line_hook): Declare.
* testsuite/gas/ppc/prefix-align.d,
* testsuite/gas/ppc/prefix-align.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new test.
This option (also implied by --traditional) causes '$' to introduce
literal hexadecimal constants, rather than the modern convention '0x'.
gas/
* config/tc-s12z.c (s12z_strtol): New function. (md_show_usage): Update.
(md_parse_option): new case OPTION_DOLLAR_HEX. (s12z_init_after_args):
(<global>): Use s12z_strtol instead of strtol.
* doc/c-s12z.texi (S12Z Options): Document new option -mdollar-hex.
* testsuite/gas/s12z/dollar-hex.d: New file.
* testsuite/gas/s12z/dollar-hex.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
This patch makes changes to the <spec_reg> operand for VMRS and VMSR
instructions as per the Armv8.1-M Mainline.
New <spec_reg> options to support are:
0b0010: FPSCR_nzcvqc, access to FPSCR condition and saturation flags.
0b1100: VPR, privileged only access to the VPR register.
0b1101: P0, access to VPR.P0 predicate fields
0b1110: FPCXT_NS, enables saving and restoring of Non-secure floating
point context.
0b1111: FPCXT_S, enables saving and restoring of Secure floating point
context
*** gas/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (parse_operands): Update case OP_RVC to
parse p0 and P0.
(do_vmrs): Add checks for valid operands with respect to
cpu and fpu options.
(do_vmsr): Likewise.
(reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS
and FPCXT_S.
* testsuite/gas/arm/armv8_1-m-spec-reg.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg.s: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New.
* testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values.
* testsuite/gas/arm/vfp1xD_t2.d: Likewise.
*** opcodes/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (coprocessor_opcodes): New instructions for VMRS
and VMSR with the new operands.
This patch adds the following instructions which are part of the
Armv8.1-M Mainline:
CINC
CINV
CNEG
CSINC
CSINV
CSNEG
CSET
CSETM
CSEL
gas/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (TOGGLE_BIT): New.
(T16_32_TAB): New entries for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm and csel.
(operand_parse_code): New OP_RR_ZR.
(parse_operand): Handle case for OP_RR_ZR.
(do_t_cond): New.
(insns): New instructions for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm, csel.
* testsuite/gas/arm/armv8_1-m-cond-bad.d: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.l: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.s: New test.
* testsuite/gas/arm/armv8_1-m-cond.d: New test.
* testsuite/gas/arm/armv8_1-m-cond.s: New test.
opcodes/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (enum mve_instructions): New enum
for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv
and cneg.
(mve_opcodes): New instructions as above.
(is_mve_encoding_conflict): Add cases for csinc, csinv,
csneg and csel.
(print_insn_mve): Accept new %<bitfield>c and %<bitfield>C.
The MIPS64R6 TRM requires that the source register for DAUI
not be r0.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 67-68.
gas/
* testsuite/gas/mips/r6-branch-constraints.s: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.s: this and add test
case for DAUI.
* testsuite/gas/mips/r6-branch-constraints.l: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.l: this and add test
for DAUI.
* testsuite/gas/mips/mips.exp: Rename test from
r6-branch-constraints to r6-reg-constraints.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Change source register
constraint for DAUI.
gas/ChangeLog:
2019-05-21 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 24559
* config/tc-arm.c (move_or_literal_pool): Set size_req to 0
for MOVW replacement.
* testsuite/gas/arm/load-pseudo.s: New test input.
* testsuite/gas/arm/m0-load-pseudo.d: New test.
* testsuite/gas/arm/m23-load-pseudo.d: New test.
* testsuite/gas/arm/m33-load-pseudo.d: New test.
In an upcoming commit, I need to be able to set the prefix used
to introduce hexadecimal literal constants using a command line
flag. This is not currently possible, because the switch which
determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at
build time.
This change substitutes it for a variable to be set at start up.
gas/ChangeLog:
* expr.c (literal_prefix_dollar_hex): New variable.
(operand)[case '$']: Use the new variable instead of the old macro.
Also, move this instance of "case '$'" next to the other one, and
enable it only in the complementary proprocessor case.
* expr.h (literal_prefix_dollar_hex): Declare it.
* config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex.
* config/tc-ip2k.c: ditto
* config/tc-mt.c: ditto
* config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition.
* config/tc-ip2k.h: ditto
* config/tc-mt.h: ditto
On IRIX 5, every global symbol that is not explicitly labelled as
being a function is assumed to be an object. There is no reason
why IRIX behaviour should extend to all MIPS targets, so limit this
to only IRIX targets.
gas/
PR 14798
* config/tc-mips.c (s_mips_globl): Only treat symbols that are
not explicitly labelled as BSF_OBJECTs for IRIX targets.
* testsuite/gas/mips/pr14798.s: New test source.
* testsuite/gas/mips/pr14798-irix.d: New test.
* testsuite/gas/mips/pr14798.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
PR 14798
* testsuite/binutils-all/readelf.ss-mips: Update reference output.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
ld/
PR 14798
* testsuite/ld-mips-elf/reloc-6a.s: Specify .text section for
global code symbols.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
In an upcoming commit, I need to be able to set the prefix used
to introduce hexadecimal literal constants using a command line
flag. This is not currently possible, because the switch which
determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at
build time.
This change substitutes it for a variable to be set at start up.
gas/ChangeLog:
* expr.c (literal_prefix_dollar_hex): New variable.
(operand)[case '$']: Use the new variable instead of the old macro.
* expr.h (literal_prefix_dollar_hex): Declare it.
* config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex.
* config/tc-ip2k.c: ditto
* config/tc-mt.c: ditto
* config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition.
* config/tc-ip2k.h: ditto
* config/tc-mt.h: ditto
GNU policy is not to include trademark acknowlegements in
documentation [1]
[1] https://www.gnu.org/prep/standards/html_node/Trademarks.html
Committing as obvious.
gas/
* doc/c-arm.texi (ARM Options): Remove "(r)" and "(tm)"
* doc/c-bfin.texi (Blackfin Syntax): Remove "(r)"
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* testsuite/gas/arm/mve-tailpredloop.d: New test.
* testsuite/gas/arm/mve-tailpredloop.s: New test.
* testsuite/gas/arm/mve-vabav.d: New test.
* testsuite/gas/arm/mve-vabav.s: New test.
* testsuite/gas/arm/mve-vabd.d: New test.
* testsuite/gas/arm/mve-vabd.s: New test.
* testsuite/gas/arm/mve-vabsneg.d: New test.
* testsuite/gas/arm/mve-vabsneg.s: New test.
* testsuite/gas/arm/mve-vadc.d: New test.
* testsuite/gas/arm/mve-vadc.s: New test.
* testsuite/gas/arm/mve-vaddlv.d: New test.
* testsuite/gas/arm/mve-vaddlv.s: New test.
* testsuite/gas/arm/mve-vaddsub.d: New test.
* testsuite/gas/arm/mve-vaddsub.s: New test.
* testsuite/gas/arm/mve-vaddv.d: New test.
* testsuite/gas/arm/mve-vaddv.s: New test.
* testsuite/gas/arm/mve-vand.d: New test.
* testsuite/gas/arm/mve-vand.s: New test.
* testsuite/gas/arm/mve-vbic.d: New test.
* testsuite/gas/arm/mve-vbic.s: New test.
* testsuite/gas/arm/mve-vbrsr.d: New test.
* testsuite/gas/arm/mve-vbrsr.s: New test.
* testsuite/gas/arm/mve-vcadd.d: New test.
* testsuite/gas/arm/mve-vcadd.s: New test.
* testsuite/gas/arm/mve-vcls.d: New test.
* testsuite/gas/arm/mve-vcls.s: New test.
* testsuite/gas/arm/mve-vclz.d: New test.
* testsuite/gas/arm/mve-vclz.s: New test.
* testsuite/gas/arm/mve-vcmla.d: New test.
* testsuite/gas/arm/mve-vcmla.s: New test.
* testsuite/gas/arm/mve-vcmp.d: New test.
* testsuite/gas/arm/mve-vcmp.s: New test.
* testsuite/gas/arm/mve-vcmul.d: New test.
* testsuite/gas/arm/mve-vcmul.s: New test.
* testsuite/gas/arm/mve-vcvt-1.d: New test.
* testsuite/gas/arm/mve-vcvt-1.s: New test.
* testsuite/gas/arm/mve-vcvt-2.d: New test.
* testsuite/gas/arm/mve-vcvt-2.s: New test.
* testsuite/gas/arm/mve-vcvt-3.d: New test.
* testsuite/gas/arm/mve-vcvt-3.s: New test.
* testsuite/gas/arm/mve-vcvt-4.d: New test.
* testsuite/gas/arm/mve-vcvt-4.s: New test.
* testsuite/gas/arm/mve-vddup.d: New test.
* testsuite/gas/arm/mve-vddup.s: New test.
* testsuite/gas/arm/mve-vdup.d: New test.
* testsuite/gas/arm/mve-vdup.s: New test.
* testsuite/gas/arm/mve-veor.d: New test.
* testsuite/gas/arm/mve-veor.s: New test.
* testsuite/gas/arm/mve-vfma-vfms.d: New test.
* testsuite/gas/arm/mve-vfma-vfms.s: New test.
* testsuite/gas/arm/mve-vfmas.d: New test.
* testsuite/gas/arm/mve-vfmas.s: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.d: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.s: New test.
* testsuite/gas/arm/mve-vhcadd.d: New test.
* testsuite/gas/arm/mve-vhcadd.s: New test.
* testsuite/gas/arm/mve-vmax-vmin.d: New test.
* testsuite/gas/arm/mve-vmax-vmin.s: New test.
* testsuite/gas/arm/mve-vmaxa-vmina.d: New test.
* testsuite/gas/arm/mve-vmaxa-vmina.s: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm.d: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm.s: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma.s: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv.d: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv.s: New test.
* testsuite/gas/arm/mve-vmaxv-vminv.d: New test.
* testsuite/gas/arm/mve-vmaxv-vminv.s: New test.
* testsuite/gas/arm/mve-vmla.d: New test.
* testsuite/gas/arm/mve-vmla.s: New test.
* testsuite/gas/arm/mve-vmladav.d: New test.
* testsuite/gas/arm/mve-vmladav.s: New test.
* testsuite/gas/arm/mve-vmlaldav.d: New test.
* testsuite/gas/arm/mve-vmlaldav.s: New test.
* testsuite/gas/arm/mve-vmlalv.d: New test.
* testsuite/gas/arm/mve-vmlalv.s: New test.
* testsuite/gas/arm/mve-vmlas.d: New test.
* testsuite/gas/arm/mve-vmlas.s: New test.
* testsuite/gas/arm/mve-vmlav.d: New test.
* testsuite/gas/arm/mve-vmlav.s: New test.
* testsuite/gas/arm/mve-vmlsdav.d: New test.
* testsuite/gas/arm/mve-vmlsdav.s: New test.
* testsuite/gas/arm/mve-vmlsldav.d: New test.
* testsuite/gas/arm/mve-vmlsldav.s: New test.
* testsuite/gas/arm/mve-vmov-1.d: New test.
* testsuite/gas/arm/mve-vmov-1.s: New test.
* testsuite/gas/arm/mve-vmov-2.d: New test.
* testsuite/gas/arm/mve-vmov-2.s: New test.
* testsuite/gas/arm/mve-vmul.d: New test.
* testsuite/gas/arm/mve-vmul.s: New test.
* testsuite/gas/arm/mve-vmulh.d: New test.
* testsuite/gas/arm/mve-vmulh.s: New test.
* testsuite/gas/arm/mve-vmullbt.d: New test.
* testsuite/gas/arm/mve-vmullbt.s: New test.
* testsuite/gas/arm/mve-vmvn.d: New test.
* testsuite/gas/arm/mve-vmvn.s: New test.
* testsuite/gas/arm/mve-vorn.d: New test.
* testsuite/gas/arm/mve-vorn.s: New test.
* testsuite/gas/arm/mve-vorr.d: New test.
* testsuite/gas/arm/mve-vorr.s: New test.
* testsuite/gas/arm/mve-vpnot.d: New test.
* testsuite/gas/arm/mve-vpnot.s: New test.
* testsuite/gas/arm/mve-vpsel.d: New test.
* testsuite/gas/arm/mve-vpsel.s: New test.
* testsuite/gas/arm/mve-vpt.d: New test.
* testsuite/gas/arm/mve-vpt.s: New test.
* testsuite/gas/arm/mve-vqabsneg.s: New test.
* testsuite/gas/arm/mve-vqaddsub.d: New test.
* testsuite/gas/arm/mve-vqaddsub.s: New test.
* testsuite/gas/arm/mve-vqdmladh.d: New test.
* testsuite/gas/arm/mve-vqdmladh.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: New test.
* testsuite/gas/arm/mve-vqdmlah.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: New test.
* testsuite/gas/arm/mve-vqdmlash.s: New test.
* testsuite/gas/arm/mve-vqdmlsdh.d: New test.
* testsuite/gas/arm/mve-vqdmlsdh.s: New test.
* testsuite/gas/arm/mve-vqdmulh.d: New test.
* testsuite/gas/arm/mve-vqdmulh.s: New test.
* testsuite/gas/arm/mve-vqdmull.d: New test.
* testsuite/gas/arm/mve-vqdmull.s: New test.
* testsuite/gas/arm/mve-vqmovn.d: New test.
* testsuite/gas/arm/mve-vqmovn.s: New test.
* testsuite/gas/arm/mve-vqrshl.d: New test.
* testsuite/gas/arm/mve-vqrshl.s: New test.
* testsuite/gas/arm/mve-vqrshrn.d: New test.
* testsuite/gas/arm/mve-vqrshrn.s: New test.
* testsuite/gas/arm/mve-vqshl.d: New test.
* testsuite/gas/arm/mve-vqshl.s: New test.
* testsuite/gas/arm/mve-vrev.d: New test.
* testsuite/gas/arm/mve-vrev.s: New test.
* testsuite/gas/arm/mve-vrint.d: New test.
* testsuite/gas/arm/mve-vrint.s: New test.
* testsuite/gas/arm/mve-vrmlaldavh.d: New test.
* testsuite/gas/arm/mve-vrmlaldavh.s: New test.
* testsuite/gas/arm/mve-vrshl.d: New test.
* testsuite/gas/arm/mve-vrshl.s: New test.
* testsuite/gas/arm/mve-vsbc.d: New test.
* testsuite/gas/arm/mve-vsbc.s: New test.
* testsuite/gas/arm/mve-vshl.d: New test.
* testsuite/gas/arm/mve-vshl.s: New test.
* testsuite/gas/arm/mve-vshlc.d: New test.
* testsuite/gas/arm/mve-vshlc.s: New test.
* testsuite/gas/arm/mve-vshll.d: New test.
* testsuite/gas/arm/mve-vshll.s: New test.
* testsuite/gas/arm/mve-vshr.d: New test.
* testsuite/gas/arm/mve-vshr.s: New test.
* testsuite/gas/arm/mve-vshrn.d: New test.
* testsuite/gas/arm/mve-vshrn.s: New test.
* testsuite/gas/arm/mve-vsli.d: New test.
* testsuite/gas/arm/mve-vsli.s: New test.
* testsuite/gas/arm/mve-vsri.d: New test.
* testsuite/gas/arm/mve-vsri.s: New test.
* testsuite/gas/arm/mve-vstld.d: New test.
* testsuite/gas/arm/mve-vstld.s: New test.
* testsuite/gas/arm/mve-vstrldr-1.d: New test.
* testsuite/gas/arm/mve-vstrldr-1.s: New test.
* testsuite/gas/arm/mve-vstrldr-2.d: New test.
* testsuite/gas/arm/mve-vstrldr-2.s: New test.
* testsuite/gas/arm/mve-vstrldr-3.d: New test.
* testsuite/gas/arm/mve-vstrldr-3.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vshll): New encoding function.
(do_mve_vshlc): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vshlc-bad.d: New test.
* testsuite/gas/arm/mve-vshlc-bad.l: New test.
* testsuite/gas/arm/mve-vshlc-bad.s: New test.
* testsuite/gas/arm/mve-vshll-bad.d: New test.
* testsuite/gas/arm/mve-vshll-bad.l: New test.
* testsuite/gas/arm/mve-vshll-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vqmovnt, M_MNEM_vqmovnb,
M_MNEM_vqmovunt, M_MNEM_vqmovunb): New instruction encodings.
(do_mve_vqmovn): New encoding function.
(do_neon_rshl): Change to accepte MVE variants.
(insns): Change entries and add new for MVE mnemonics.
* testsuite/gas/arm/mve-vqmovn-bad.d: New test.
* testsuite/gas/arm/mve-vqmovn-bad.l: New test.
* testsuite/gas/arm/mve-vqmovn-bad.s: New test.
* testsuite/gas/arm/mve-vqrshl-bad.d: New test.
* testsuite/gas/arm/mve-vqrshl-bad.l: New test.
* testsuite/gas/arm/mve-vqrshl-bad.s: New test.
* testsuite/gas/arm/mve-vrshl-bad.d: New test.
* testsuite/gas/arm/mve-vrshl-bad.l: New test.
* testsuite/gas/arm/mve-vrshl-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(do_mve_vqdmull): New encoding function.
(insns): Add entry for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmull-bad.d: New test.
* testsuite/gas/arm/mve-vqdmull-bad.l: New test.
* testsuite/gas/arm/mve-vqdmull-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Handle new instructions.
(do_neon_qdmulh): Add support for MVE variants.
(do_neon_qrdmlah): Likewise.
(do_mve_vqdmlah): New encoding function.
(insns): Change entries and add new entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmulh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmulh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmulh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vqdmladh): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmladh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmladh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmladh-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vpsel): New encoding function.
(do_mve_vpnot): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vpnot-bad.d: New test.
* testsuite/gas/arm/mve-vpnot-bad.l: New test.
* testsuite/gas/arm/mve-vpnot-bad.s: New test.
* testsuite/gas/arm/mve-vpsel-bad.d: New test.
* testsuite/gas/arm/mve-vpsel-bad.l: New test.
* testsuite/gas/arm/mve-vpsel-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmlas): New encoding function.
(do_mve_vmulh): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vmlas-bad.d: New test.
* testsuite/gas/arm/mve-vmlas-bad.l: New test.
* testsuite/gas/arm/mve-vmlas-bad.s: New test.
* testsuite/gas/arm/mve-vmulh-bad.d: New test.
* testsuite/gas/arm/mve-vmulh-bad.l: New test.
* testsuite/gas/arm/mve-vmulh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Handle new instructions.
(do_neon_dyadic_i64_su): Accept MVE variants.
(neon_dyadic_misc): Likewise.
(do_neon_mac_maybe_scalar): Likewise.
(do_neon_mul): Likewise.
(insns): Change to accept MVE variants.
* testsuite/gas/arm/mve-vmla-bad.d: New test.
* testsuite/gas/arm/mve-vmla-bad.l: New test.
* testsuite/gas/arm/mve-vmla-bad.s: New test.
* testsuite/gas/arm/mve-vmul-bad-1.d: New test.
* testsuite/gas/arm/mve-vmul-bad-1.l: New test.
* testsuite/gas/arm/mve-vmul-bad-1.s: New test.
* testsuite/gas/arm/mve-vmul-bad-2.d: New test.
* testsuite/gas/arm/mve-vmul-bad-2.l: New test.
* testsuite/gas/arm/mve-vmul-bad-2.s: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.d: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.l: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vmlaldav, M_MNEM_vmlaldava,
M_MNEM_vmlaldavx, M_MNEM_vmlaldavax, M_MNEM_vmlsldav,
M_MNEM_vmlsldava, M_MNEM_vmlsldavx, M_MNEM_vmlsldavax,
M_MNEM_vrmlaldavhx, M_MNEM_vrmlaldavhax, M_MNEM_vrmlsldavh,
M_MNEM_vrmlsldavha, M_MNEM_vrmlsldavhx, M_MNEM_vrmlsldavhax): New
instruction encodings.
(NEON_SHAPE_DEF): New shape
(mve_encode_rrqq): New encoding helper function.
(do_mve_vmlaldav): New encoding function.
(do_mve_vrmlaldavh): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vmlaldav-bad.d: New test.
* testsuite/gas/arm/mve-vmlaldav-bad.l: New test.
* testsuite/gas/arm/mve-vmlaldav-bad.s: New test.
* testsuite/gas/arm/mve-vmlalv-bad.d: New test.
* testsuite/gas/arm/mve-vmlalv-bad.l: New test.
* testsuite/gas/arm/mve-vmlalv-bad.s: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.d: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.l: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.s: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.d: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.l: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vmaxv, M_MNEM_vmaxav, M_MNEM_vminv,
M_MNEM_vminav): New instruction encodings.
(do_mve_vmaxv): New encoding function.
(insns): Add entries for new MVE mnemonics.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.d: New test.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.l: New test.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmaxnmv): New encoding function.
(insns): Add entries for new mnemonics.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmaxa_vmina): New encoding function.
(do_mve_vmaxnma_vminnma): Likewise.
(do_neon_dyadic_if_su): Change to support MVE variants.
(do_vmaxnm): Likewise.
(insns): Change to accept MVE variants and add new.
* testsuite/gas/arm/mve-vmax-vmin-bad.d: New test.
* testsuite/gas/arm/mve-vmax-vmin-bad.l: New test.
* testsuite/gas/arm/mve-vmax-vmin-bad.s: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.d: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.l: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.s: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.s: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Change to support new instructions.
(enum vfp_or_neon_is_neon_bits): Moved.
(vfp_or_neon_is_neon): Moved.
(check_simd_pred_availability): Moved.
(do_neon_dyadic_i_su): Changed to support MVE variants.
(neon_dyadic_misc): Changed mve_encode_qqr call.
(do_mve_vbrsr): Likewise.
(do_mve_vhcadd): New encoding function.
(insns): Change existing to accept MVE variants and add new.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.d: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.l: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.s: New test.
* testsuite/gas/arm/mve-vhcadd-bad.d: New test.
* testsuite/gas/arm/mve-vhcadd-bad.l: New test.
* testsuite/gas/arm/mve-vhcadd-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_fmac): Change to support MVE variants.
(insns): Change to accept MVE variants.
* testsuite/gas/arm/mve-vfma-vfms-bad.d: New test.
* testsuite/gas/arm/mve-vfma-vfms-bad.l: New test.
* testsuite/gas/arm/mve-vfma-vfms-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vddup, M_MNEM_vdwdup, M_MNEM_vidup,
M_MNEM_viwdup): New instruction encodings.
(NEON_SHAPE_DEF): New shapes.
(do_mve_viddup): New encoding function.
(do_neon_dup): Change to support new MVE variants.
(insns): Change existing to accept MVE variants and add new.
* testsuite/gas/arm/mve-vddup-bad.d: New test.
* testsuite/gas/arm/mve-vddup-bad.l: New test.
* testsuite/gas/arm/mve-vddup-bad.s: New test.
* testsuite/gas/arm/mve-vdup-bad.d: New test.
* testsuite/gas/arm/mve-vdup-bad.l: New test.
* testsuite/gas/arm/mve-vdup-bad.s: New test.
* testsuite/gas/arm/mve-vidup-bad.d: New test.
* testsuite/gas/arm/mve-vidup-bad.l: New test.
* testsuite/gas/arm/mve-vidup-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vfmas): New encoding function.
(do_neon_cls): Change to support MVE variants.
(do_neon_clz): Change to support MVE variants.
(insns): Change to support MVE variants and add new.
* testsuite/gas/arm/mve-vcls-bad.d: New test.
* testsuite/gas/arm/mve-vcls-bad.l: New test.
* testsuite/gas/arm/mve-vcls-bad.s: New test.
* testsuite/gas/arm/mve-vclz-bad.d: New test.
* testsuite/gas/arm/mve-vclz-bad.l: New test.
* testsuite/gas/arm/mve-vclz-bad.s: New test.
* testsuite/gas/arm/mve-vfmas-bad.d: New test.
* testsuite/gas/arm/mve-vfmas-bad.l: New test.
* testsuite/gas/arm/mve-vfmas-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operands.
(parse_operands): Handle new operands.
(do_mve_vcmul): New encoding function.
(do_vcmla): Change to support MVE variants.
(do_vcadd): Change to support MVE variants.
(insns): Change existing to support MVE variants and add new.
* testsuite/gas/arm/mve-vcadd-bad-1.d: New test.
* testsuite/gas/arm/mve-vcadd-bad-1.l: New test.
* testsuite/gas/arm/mve-vcadd-bad-1.s: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.d: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.l: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.s: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.s: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operands.
(parse_operands): Handle new operands.
(enum vfp_or_neon_is_neon_bits): Moved
(vfp_or_neon_is_neon): Moved
(check_simd_pred_availability): Moved.
(do_neon_logic): Change to accept MVE variants.
(insns): Changed to accept MVE variants.
* testsuite/gas/arm/mve-vand-bad.d: New test.
* testsuite/gas/arm/mve-vand-bad.l: New test.
* testsuite/gas/arm/mve-vand-bad.s: New test.
* testsuite/gas/arm/mve-vbic-bad.d: New test.
* testsuite/gas/arm/mve-vbic-bad.l: New test.
* testsuite/gas/arm/mve-vbic-bad.s: New test.
* testsuite/gas/arm/mve-veor-bad.d: New test.
* testsuite/gas/arm/mve-veor-bad.l: New test.
* testsuite/gas/arm/mve-veor-bad.s: New test.
* testsuite/gas/arm/mve-vorn-bad.d: New test.
* testsuite/gas/arm/mve-vorn-bad.l: New test.
* testsuite/gas/arm/mve-vorn-bad.s: New test.
* testsuite/gas/arm/mve-vorr-bad.d: New test.
* testsuite/gas/arm/mve-vorr-bad.l: New test.
* testsuite/gas/arm/mve-vorr-bad.s: New test.
