If VEX.vvvv and EVEX.vvvv are reserved, they must be all 1s, which are
all 0s in inverted form. Add check for unused VEX.vvvv and EVEX.vvvv
when disassembling VEX and EVEX instructions.
gas/
PR binutils/24626
* testsuite/gas/i386/disassem.s: Add tests for reserved VEX.vvvv
and EVEX.vvvv.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24626
* i386-dis.c (print_insn): Check for unused VEX.vvvv and
EVEX.vvvv when disassembling VEX and EVEX instructions.
(OP_VEX): Set vex.register_specifier to 0 after readding
vex.register_specifier.
(OP_Vex_2src_1): Likewise.
(OP_Vex_2src_2): Likewise.
(OP_LWP_E): Likewise.
(OP_EX_Vex): Don't check vex.register_specifier.
(OP_XMM_Vex): Likewise.
This fixes a bug reported on the riscv.org sw-dev mailing list. This
rejects "lui x1,symbol", as a symbol should only be accepted here when
used inside %hi(). Without the fix, this gets assembled as "lui x1,0"
with no relocation which is clearly wrong.
gas/
* config/tc-riscv.c (riscv_ip) <'u'>: Move O_constant check inside if
statement. Delete O_symbol and O_constant check after if statement.
* testsuite/gas/riscv/auipc-parsing.s: Test lui with missing %hi.
* testsuite/gas/riscv/auipc-parsing.l: Update.
For AVX512 instructions with Disp8ShiftVL and Broadcast, we may need to
add CheckRegSize to check if broadcast matches the destination register
size.
gas/
PR gas/24625
* testsuite/gas/i386/inval-avx512f.s: Add tests for AVX512_BF16
instructions with invalid broadcast.
* testsuite/gas/i386/x86-64-inval-avx512f.s: Likewise.
* testsuite/gas/i386/inval-avx512f.l: Updated.
* testsuite/gas/i386/x86-64-inval-avx512f.l: Likewise.
opcodes/
PR gas/24625
* i386-opc.tbl: Add CheckRegSize to AVX512_BF16 instructions with
Disp8ShiftVL.
* i386-tbl.h: Regenerated.
Targets that lack ppc64 support were failing the new prefix-reloc
test. This patch adds some test infrastructure to deal with that, and
changes the powerpc gas usage info so that "-a64" is omitted when
unsupported.
I've been meaning to break up the usage message for a long time;
While doing so causes translators some work now, it should make it
easier next time a new powerpc option is added.
* config/tc-ppc.c (is_ppc64_target): New function.
(md_show_usage): Split up usage message. Don't show -a64 when
unsupported.
testsuite/gas/ppc/ppc.exp (supports_ppc64): New.
(prefix-reloc): Only run for ppc64.
Allow st_other values such as STO_AARCH64_VARIANT_PCS to be set for alias
symbols independently. This is needed for ifunc symbols which are
aliased to the resolver using .set and don't expect resolver attributes
to override the ifunc symbol attributes. This means .variant_pcs must be
added explicitly to aliases.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_elf_copy_symbol_attributes): Define.
* config/tc-aarch64.h (aarch64_elf_copy_symbol_attributes): Declare.
(OBJ_COPY_SYMBOL_ATTRIBUTES): Define.
* testsuite/gas/aarch64/symbol-variant_pcs-3.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-3.s: New test.
In ELF objects the specified symbol is marked with STO_AARCH64_VARIANT_PCS.
gas/ChangeLog:
* config/tc-aarch64.c (s_variant_pcs): New function.
* doc/c-aarch64.texi: Document .variant_pcs.
* testsuite/gas/aarch64/symbol-variant_pcs-1.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-1.s: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.s: New test.
This patch adds initial 64-bit insn assembler/disassembler support.
The only instruction added is "pnop" along with the automatic aligning
of prefix instruction so they do not cross 64-byte boundaries.
include/
* dis-asm.h (WIDE_OUTPUT): Define.
* opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare.
(PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX),
(PPC_PREFIX_P, PPC_PREFIX_SEG): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "future" entry.
(PREFIX_OPCD_SEGS): Define.
(prefix_opcd_indices): New array.
(disassemble_init_powerpc): Initialize prefix_opcd_indices.
(lookup_prefix): New function.
(print_insn_powerpc): Handle 64-bit prefix instructions.
* ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK),
(PMRR, POWERXX): Define.
(prefix_opcodes): New instruction table.
(prefix_num_opcodes): New constant.
binutils/
* objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes.
(struct insn_label_list): New.
(insn_labels, free_insn_labels): New variables.
(ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs.
(ppc_frob_label, ppc_new_dot_label): Move functions earlier in file
and call ppc_record_label.
(md_assemble): Handle 64-bit prefix instructions. Align labels
that are on the same line as a prefix instruction.
* config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to
later in the file.
(md_start_line_hook): Define.
(ppc_start_line_hook): Declare.
* testsuite/gas/ppc/prefix-align.d,
* testsuite/gas/ppc/prefix-align.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new test.
This option (also implied by --traditional) causes '$' to introduce
literal hexadecimal constants, rather than the modern convention '0x'.
gas/
* config/tc-s12z.c (s12z_strtol): New function. (md_show_usage): Update.
(md_parse_option): new case OPTION_DOLLAR_HEX. (s12z_init_after_args):
(<global>): Use s12z_strtol instead of strtol.
* doc/c-s12z.texi (S12Z Options): Document new option -mdollar-hex.
* testsuite/gas/s12z/dollar-hex.d: New file.
* testsuite/gas/s12z/dollar-hex.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
This patch makes changes to the <spec_reg> operand for VMRS and VMSR
instructions as per the Armv8.1-M Mainline.
New <spec_reg> options to support are:
0b0010: FPSCR_nzcvqc, access to FPSCR condition and saturation flags.
0b1100: VPR, privileged only access to the VPR register.
0b1101: P0, access to VPR.P0 predicate fields
0b1110: FPCXT_NS, enables saving and restoring of Non-secure floating
point context.
0b1111: FPCXT_S, enables saving and restoring of Secure floating point
context
*** gas/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (parse_operands): Update case OP_RVC to
parse p0 and P0.
(do_vmrs): Add checks for valid operands with respect to
cpu and fpu options.
(do_vmsr): Likewise.
(reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS
and FPCXT_S.
* testsuite/gas/arm/armv8_1-m-spec-reg.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg.s: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New.
* testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values.
* testsuite/gas/arm/vfp1xD_t2.d: Likewise.
*** opcodes/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (coprocessor_opcodes): New instructions for VMRS
and VMSR with the new operands.
This patch adds the following instructions which are part of the
Armv8.1-M Mainline:
CINC
CINV
CNEG
CSINC
CSINV
CSNEG
CSET
CSETM
CSEL
gas/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (TOGGLE_BIT): New.
(T16_32_TAB): New entries for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm and csel.
(operand_parse_code): New OP_RR_ZR.
(parse_operand): Handle case for OP_RR_ZR.
(do_t_cond): New.
(insns): New instructions for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm, csel.
* testsuite/gas/arm/armv8_1-m-cond-bad.d: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.l: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.s: New test.
* testsuite/gas/arm/armv8_1-m-cond.d: New test.
* testsuite/gas/arm/armv8_1-m-cond.s: New test.
opcodes/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (enum mve_instructions): New enum
for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv
and cneg.
(mve_opcodes): New instructions as above.
(is_mve_encoding_conflict): Add cases for csinc, csinv,
csneg and csel.
(print_insn_mve): Accept new %<bitfield>c and %<bitfield>C.
The MIPS64R6 TRM requires that the source register for DAUI
not be r0.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 67-68.
gas/
* testsuite/gas/mips/r6-branch-constraints.s: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.s: this and add test
case for DAUI.
* testsuite/gas/mips/r6-branch-constraints.l: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.l: this and add test
for DAUI.
* testsuite/gas/mips/mips.exp: Rename test from
r6-branch-constraints to r6-reg-constraints.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Change source register
constraint for DAUI.
gas/ChangeLog:
2019-05-21 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 24559
* config/tc-arm.c (move_or_literal_pool): Set size_req to 0
for MOVW replacement.
* testsuite/gas/arm/load-pseudo.s: New test input.
* testsuite/gas/arm/m0-load-pseudo.d: New test.
* testsuite/gas/arm/m23-load-pseudo.d: New test.
* testsuite/gas/arm/m33-load-pseudo.d: New test.
In an upcoming commit, I need to be able to set the prefix used
to introduce hexadecimal literal constants using a command line
flag. This is not currently possible, because the switch which
determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at
build time.
This change substitutes it for a variable to be set at start up.
gas/ChangeLog:
* expr.c (literal_prefix_dollar_hex): New variable.
(operand)[case '$']: Use the new variable instead of the old macro.
Also, move this instance of "case '$'" next to the other one, and
enable it only in the complementary proprocessor case.
* expr.h (literal_prefix_dollar_hex): Declare it.
* config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex.
* config/tc-ip2k.c: ditto
* config/tc-mt.c: ditto
* config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition.
* config/tc-ip2k.h: ditto
* config/tc-mt.h: ditto
On IRIX 5, every global symbol that is not explicitly labelled as
being a function is assumed to be an object. There is no reason
why IRIX behaviour should extend to all MIPS targets, so limit this
to only IRIX targets.
gas/
PR 14798
* config/tc-mips.c (s_mips_globl): Only treat symbols that are
not explicitly labelled as BSF_OBJECTs for IRIX targets.
* testsuite/gas/mips/pr14798.s: New test source.
* testsuite/gas/mips/pr14798-irix.d: New test.
* testsuite/gas/mips/pr14798.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
PR 14798
* testsuite/binutils-all/readelf.ss-mips: Update reference output.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
ld/
PR 14798
* testsuite/ld-mips-elf/reloc-6a.s: Specify .text section for
global code symbols.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
In an upcoming commit, I need to be able to set the prefix used
to introduce hexadecimal literal constants using a command line
flag. This is not currently possible, because the switch which
determines this (LITERAL_PREFIXDOLLAR_HEX) is a macro set at
build time.
This change substitutes it for a variable to be set at start up.
gas/ChangeLog:
* expr.c (literal_prefix_dollar_hex): New variable.
(operand)[case '$']: Use the new variable instead of the old macro.
* expr.h (literal_prefix_dollar_hex): Declare it.
* config/tc-epiphany.c (md_begin): Assign literal_prefix_dollar_hex.
* config/tc-ip2k.c: ditto
* config/tc-mt.c: ditto
* config/tc-epiphany.h (LITERAL_PREFIXDOLLAR_HEX): Remove macro definition.
* config/tc-ip2k.h: ditto
* config/tc-mt.h: ditto
GNU policy is not to include trademark acknowlegements in
documentation [1]
[1] https://www.gnu.org/prep/standards/html_node/Trademarks.html
Committing as obvious.
gas/
* doc/c-arm.texi (ARM Options): Remove "(r)" and "(tm)"
* doc/c-bfin.texi (Blackfin Syntax): Remove "(r)"
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* testsuite/gas/arm/mve-tailpredloop.d: New test.
* testsuite/gas/arm/mve-tailpredloop.s: New test.
* testsuite/gas/arm/mve-vabav.d: New test.
* testsuite/gas/arm/mve-vabav.s: New test.
* testsuite/gas/arm/mve-vabd.d: New test.
* testsuite/gas/arm/mve-vabd.s: New test.
* testsuite/gas/arm/mve-vabsneg.d: New test.
* testsuite/gas/arm/mve-vabsneg.s: New test.
* testsuite/gas/arm/mve-vadc.d: New test.
* testsuite/gas/arm/mve-vadc.s: New test.
* testsuite/gas/arm/mve-vaddlv.d: New test.
* testsuite/gas/arm/mve-vaddlv.s: New test.
* testsuite/gas/arm/mve-vaddsub.d: New test.
* testsuite/gas/arm/mve-vaddsub.s: New test.
* testsuite/gas/arm/mve-vaddv.d: New test.
* testsuite/gas/arm/mve-vaddv.s: New test.
* testsuite/gas/arm/mve-vand.d: New test.
* testsuite/gas/arm/mve-vand.s: New test.
* testsuite/gas/arm/mve-vbic.d: New test.
* testsuite/gas/arm/mve-vbic.s: New test.
* testsuite/gas/arm/mve-vbrsr.d: New test.
* testsuite/gas/arm/mve-vbrsr.s: New test.
* testsuite/gas/arm/mve-vcadd.d: New test.
* testsuite/gas/arm/mve-vcadd.s: New test.
* testsuite/gas/arm/mve-vcls.d: New test.
* testsuite/gas/arm/mve-vcls.s: New test.
* testsuite/gas/arm/mve-vclz.d: New test.
* testsuite/gas/arm/mve-vclz.s: New test.
* testsuite/gas/arm/mve-vcmla.d: New test.
* testsuite/gas/arm/mve-vcmla.s: New test.
* testsuite/gas/arm/mve-vcmp.d: New test.
* testsuite/gas/arm/mve-vcmp.s: New test.
* testsuite/gas/arm/mve-vcmul.d: New test.
* testsuite/gas/arm/mve-vcmul.s: New test.
* testsuite/gas/arm/mve-vcvt-1.d: New test.
* testsuite/gas/arm/mve-vcvt-1.s: New test.
* testsuite/gas/arm/mve-vcvt-2.d: New test.
* testsuite/gas/arm/mve-vcvt-2.s: New test.
* testsuite/gas/arm/mve-vcvt-3.d: New test.
* testsuite/gas/arm/mve-vcvt-3.s: New test.
* testsuite/gas/arm/mve-vcvt-4.d: New test.
* testsuite/gas/arm/mve-vcvt-4.s: New test.
* testsuite/gas/arm/mve-vddup.d: New test.
* testsuite/gas/arm/mve-vddup.s: New test.
* testsuite/gas/arm/mve-vdup.d: New test.
* testsuite/gas/arm/mve-vdup.s: New test.
* testsuite/gas/arm/mve-veor.d: New test.
* testsuite/gas/arm/mve-veor.s: New test.
* testsuite/gas/arm/mve-vfma-vfms.d: New test.
* testsuite/gas/arm/mve-vfma-vfms.s: New test.
* testsuite/gas/arm/mve-vfmas.d: New test.
* testsuite/gas/arm/mve-vfmas.s: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.d: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.s: New test.
* testsuite/gas/arm/mve-vhcadd.d: New test.
* testsuite/gas/arm/mve-vhcadd.s: New test.
* testsuite/gas/arm/mve-vmax-vmin.d: New test.
* testsuite/gas/arm/mve-vmax-vmin.s: New test.
* testsuite/gas/arm/mve-vmaxa-vmina.d: New test.
* testsuite/gas/arm/mve-vmaxa-vmina.s: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm.d: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm.s: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma.s: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv.d: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv.s: New test.
* testsuite/gas/arm/mve-vmaxv-vminv.d: New test.
* testsuite/gas/arm/mve-vmaxv-vminv.s: New test.
* testsuite/gas/arm/mve-vmla.d: New test.
* testsuite/gas/arm/mve-vmla.s: New test.
* testsuite/gas/arm/mve-vmladav.d: New test.
* testsuite/gas/arm/mve-vmladav.s: New test.
* testsuite/gas/arm/mve-vmlaldav.d: New test.
* testsuite/gas/arm/mve-vmlaldav.s: New test.
* testsuite/gas/arm/mve-vmlalv.d: New test.
* testsuite/gas/arm/mve-vmlalv.s: New test.
* testsuite/gas/arm/mve-vmlas.d: New test.
* testsuite/gas/arm/mve-vmlas.s: New test.
* testsuite/gas/arm/mve-vmlav.d: New test.
* testsuite/gas/arm/mve-vmlav.s: New test.
* testsuite/gas/arm/mve-vmlsdav.d: New test.
* testsuite/gas/arm/mve-vmlsdav.s: New test.
* testsuite/gas/arm/mve-vmlsldav.d: New test.
* testsuite/gas/arm/mve-vmlsldav.s: New test.
* testsuite/gas/arm/mve-vmov-1.d: New test.
* testsuite/gas/arm/mve-vmov-1.s: New test.
* testsuite/gas/arm/mve-vmov-2.d: New test.
* testsuite/gas/arm/mve-vmov-2.s: New test.
* testsuite/gas/arm/mve-vmul.d: New test.
* testsuite/gas/arm/mve-vmul.s: New test.
* testsuite/gas/arm/mve-vmulh.d: New test.
* testsuite/gas/arm/mve-vmulh.s: New test.
* testsuite/gas/arm/mve-vmullbt.d: New test.
* testsuite/gas/arm/mve-vmullbt.s: New test.
* testsuite/gas/arm/mve-vmvn.d: New test.
* testsuite/gas/arm/mve-vmvn.s: New test.
* testsuite/gas/arm/mve-vorn.d: New test.
* testsuite/gas/arm/mve-vorn.s: New test.
* testsuite/gas/arm/mve-vorr.d: New test.
* testsuite/gas/arm/mve-vorr.s: New test.
* testsuite/gas/arm/mve-vpnot.d: New test.
* testsuite/gas/arm/mve-vpnot.s: New test.
* testsuite/gas/arm/mve-vpsel.d: New test.
* testsuite/gas/arm/mve-vpsel.s: New test.
* testsuite/gas/arm/mve-vpt.d: New test.
* testsuite/gas/arm/mve-vpt.s: New test.
* testsuite/gas/arm/mve-vqabsneg.s: New test.
* testsuite/gas/arm/mve-vqaddsub.d: New test.
* testsuite/gas/arm/mve-vqaddsub.s: New test.
* testsuite/gas/arm/mve-vqdmladh.d: New test.
* testsuite/gas/arm/mve-vqdmladh.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: New test.
* testsuite/gas/arm/mve-vqdmlah.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: New test.
* testsuite/gas/arm/mve-vqdmlash.s: New test.
* testsuite/gas/arm/mve-vqdmlsdh.d: New test.
* testsuite/gas/arm/mve-vqdmlsdh.s: New test.
* testsuite/gas/arm/mve-vqdmulh.d: New test.
* testsuite/gas/arm/mve-vqdmulh.s: New test.
* testsuite/gas/arm/mve-vqdmull.d: New test.
* testsuite/gas/arm/mve-vqdmull.s: New test.
* testsuite/gas/arm/mve-vqmovn.d: New test.
* testsuite/gas/arm/mve-vqmovn.s: New test.
* testsuite/gas/arm/mve-vqrshl.d: New test.
* testsuite/gas/arm/mve-vqrshl.s: New test.
* testsuite/gas/arm/mve-vqrshrn.d: New test.
* testsuite/gas/arm/mve-vqrshrn.s: New test.
* testsuite/gas/arm/mve-vqshl.d: New test.
* testsuite/gas/arm/mve-vqshl.s: New test.
* testsuite/gas/arm/mve-vrev.d: New test.
* testsuite/gas/arm/mve-vrev.s: New test.
* testsuite/gas/arm/mve-vrint.d: New test.
* testsuite/gas/arm/mve-vrint.s: New test.
* testsuite/gas/arm/mve-vrmlaldavh.d: New test.
* testsuite/gas/arm/mve-vrmlaldavh.s: New test.
* testsuite/gas/arm/mve-vrshl.d: New test.
* testsuite/gas/arm/mve-vrshl.s: New test.
* testsuite/gas/arm/mve-vsbc.d: New test.
* testsuite/gas/arm/mve-vsbc.s: New test.
* testsuite/gas/arm/mve-vshl.d: New test.
* testsuite/gas/arm/mve-vshl.s: New test.
* testsuite/gas/arm/mve-vshlc.d: New test.
* testsuite/gas/arm/mve-vshlc.s: New test.
* testsuite/gas/arm/mve-vshll.d: New test.
* testsuite/gas/arm/mve-vshll.s: New test.
* testsuite/gas/arm/mve-vshr.d: New test.
* testsuite/gas/arm/mve-vshr.s: New test.
* testsuite/gas/arm/mve-vshrn.d: New test.
* testsuite/gas/arm/mve-vshrn.s: New test.
* testsuite/gas/arm/mve-vsli.d: New test.
* testsuite/gas/arm/mve-vsli.s: New test.
* testsuite/gas/arm/mve-vsri.d: New test.
* testsuite/gas/arm/mve-vsri.s: New test.
* testsuite/gas/arm/mve-vstld.d: New test.
* testsuite/gas/arm/mve-vstld.s: New test.
* testsuite/gas/arm/mve-vstrldr-1.d: New test.
* testsuite/gas/arm/mve-vstrldr-1.s: New test.
* testsuite/gas/arm/mve-vstrldr-2.d: New test.
* testsuite/gas/arm/mve-vstrldr-2.s: New test.
* testsuite/gas/arm/mve-vstrldr-3.d: New test.
* testsuite/gas/arm/mve-vstrldr-3.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vshll): New encoding function.
(do_mve_vshlc): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vshlc-bad.d: New test.
* testsuite/gas/arm/mve-vshlc-bad.l: New test.
* testsuite/gas/arm/mve-vshlc-bad.s: New test.
* testsuite/gas/arm/mve-vshll-bad.d: New test.
* testsuite/gas/arm/mve-vshll-bad.l: New test.
* testsuite/gas/arm/mve-vshll-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vqmovnt, M_MNEM_vqmovnb,
M_MNEM_vqmovunt, M_MNEM_vqmovunb): New instruction encodings.
(do_mve_vqmovn): New encoding function.
(do_neon_rshl): Change to accepte MVE variants.
(insns): Change entries and add new for MVE mnemonics.
* testsuite/gas/arm/mve-vqmovn-bad.d: New test.
* testsuite/gas/arm/mve-vqmovn-bad.l: New test.
* testsuite/gas/arm/mve-vqmovn-bad.s: New test.
* testsuite/gas/arm/mve-vqrshl-bad.d: New test.
* testsuite/gas/arm/mve-vqrshl-bad.l: New test.
* testsuite/gas/arm/mve-vqrshl-bad.s: New test.
* testsuite/gas/arm/mve-vrshl-bad.d: New test.
* testsuite/gas/arm/mve-vrshl-bad.l: New test.
* testsuite/gas/arm/mve-vrshl-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(do_mve_vqdmull): New encoding function.
(insns): Add entry for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmull-bad.d: New test.
* testsuite/gas/arm/mve-vqdmull-bad.l: New test.
* testsuite/gas/arm/mve-vqdmull-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Handle new instructions.
(do_neon_qdmulh): Add support for MVE variants.
(do_neon_qrdmlah): Likewise.
(do_mve_vqdmlah): New encoding function.
(insns): Change entries and add new entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmulh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmulh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmulh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vqdmladh): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmladh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmladh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmladh-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vpsel): New encoding function.
(do_mve_vpnot): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vpnot-bad.d: New test.
* testsuite/gas/arm/mve-vpnot-bad.l: New test.
* testsuite/gas/arm/mve-vpnot-bad.s: New test.
* testsuite/gas/arm/mve-vpsel-bad.d: New test.
* testsuite/gas/arm/mve-vpsel-bad.l: New test.
* testsuite/gas/arm/mve-vpsel-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmlas): New encoding function.
(do_mve_vmulh): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vmlas-bad.d: New test.
* testsuite/gas/arm/mve-vmlas-bad.l: New test.
* testsuite/gas/arm/mve-vmlas-bad.s: New test.
* testsuite/gas/arm/mve-vmulh-bad.d: New test.
* testsuite/gas/arm/mve-vmulh-bad.l: New test.
* testsuite/gas/arm/mve-vmulh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Handle new instructions.
(do_neon_dyadic_i64_su): Accept MVE variants.
(neon_dyadic_misc): Likewise.
(do_neon_mac_maybe_scalar): Likewise.
(do_neon_mul): Likewise.
(insns): Change to accept MVE variants.
* testsuite/gas/arm/mve-vmla-bad.d: New test.
* testsuite/gas/arm/mve-vmla-bad.l: New test.
* testsuite/gas/arm/mve-vmla-bad.s: New test.
* testsuite/gas/arm/mve-vmul-bad-1.d: New test.
* testsuite/gas/arm/mve-vmul-bad-1.l: New test.
* testsuite/gas/arm/mve-vmul-bad-1.s: New test.
* testsuite/gas/arm/mve-vmul-bad-2.d: New test.
* testsuite/gas/arm/mve-vmul-bad-2.l: New test.
* testsuite/gas/arm/mve-vmul-bad-2.s: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.d: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.l: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vmlaldav, M_MNEM_vmlaldava,
M_MNEM_vmlaldavx, M_MNEM_vmlaldavax, M_MNEM_vmlsldav,
M_MNEM_vmlsldava, M_MNEM_vmlsldavx, M_MNEM_vmlsldavax,
M_MNEM_vrmlaldavhx, M_MNEM_vrmlaldavhax, M_MNEM_vrmlsldavh,
M_MNEM_vrmlsldavha, M_MNEM_vrmlsldavhx, M_MNEM_vrmlsldavhax): New
instruction encodings.
(NEON_SHAPE_DEF): New shape
(mve_encode_rrqq): New encoding helper function.
(do_mve_vmlaldav): New encoding function.
(do_mve_vrmlaldavh): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vmlaldav-bad.d: New test.
* testsuite/gas/arm/mve-vmlaldav-bad.l: New test.
* testsuite/gas/arm/mve-vmlaldav-bad.s: New test.
* testsuite/gas/arm/mve-vmlalv-bad.d: New test.
* testsuite/gas/arm/mve-vmlalv-bad.l: New test.
* testsuite/gas/arm/mve-vmlalv-bad.s: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.d: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.l: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.s: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.d: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.l: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vmaxv, M_MNEM_vmaxav, M_MNEM_vminv,
M_MNEM_vminav): New instruction encodings.
(do_mve_vmaxv): New encoding function.
(insns): Add entries for new MVE mnemonics.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.d: New test.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.l: New test.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmaxnmv): New encoding function.
(insns): Add entries for new mnemonics.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmaxa_vmina): New encoding function.
(do_mve_vmaxnma_vminnma): Likewise.
(do_neon_dyadic_if_su): Change to support MVE variants.
(do_vmaxnm): Likewise.
(insns): Change to accept MVE variants and add new.
* testsuite/gas/arm/mve-vmax-vmin-bad.d: New test.
* testsuite/gas/arm/mve-vmax-vmin-bad.l: New test.
* testsuite/gas/arm/mve-vmax-vmin-bad.s: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.d: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.l: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.s: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.s: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Change to support new instructions.
(enum vfp_or_neon_is_neon_bits): Moved.
(vfp_or_neon_is_neon): Moved.
(check_simd_pred_availability): Moved.
(do_neon_dyadic_i_su): Changed to support MVE variants.
(neon_dyadic_misc): Changed mve_encode_qqr call.
(do_mve_vbrsr): Likewise.
(do_mve_vhcadd): New encoding function.
(insns): Change existing to accept MVE variants and add new.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.d: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.l: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.s: New test.
* testsuite/gas/arm/mve-vhcadd-bad.d: New test.
* testsuite/gas/arm/mve-vhcadd-bad.l: New test.
* testsuite/gas/arm/mve-vhcadd-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_fmac): Change to support MVE variants.
(insns): Change to accept MVE variants.
* testsuite/gas/arm/mve-vfma-vfms-bad.d: New test.
* testsuite/gas/arm/mve-vfma-vfms-bad.l: New test.
* testsuite/gas/arm/mve-vfma-vfms-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vddup, M_MNEM_vdwdup, M_MNEM_vidup,
M_MNEM_viwdup): New instruction encodings.
(NEON_SHAPE_DEF): New shapes.
(do_mve_viddup): New encoding function.
(do_neon_dup): Change to support new MVE variants.
(insns): Change existing to accept MVE variants and add new.
* testsuite/gas/arm/mve-vddup-bad.d: New test.
* testsuite/gas/arm/mve-vddup-bad.l: New test.
* testsuite/gas/arm/mve-vddup-bad.s: New test.
* testsuite/gas/arm/mve-vdup-bad.d: New test.
* testsuite/gas/arm/mve-vdup-bad.l: New test.
* testsuite/gas/arm/mve-vdup-bad.s: New test.
* testsuite/gas/arm/mve-vidup-bad.d: New test.
* testsuite/gas/arm/mve-vidup-bad.l: New test.
* testsuite/gas/arm/mve-vidup-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vfmas): New encoding function.
(do_neon_cls): Change to support MVE variants.
(do_neon_clz): Change to support MVE variants.
(insns): Change to support MVE variants and add new.
* testsuite/gas/arm/mve-vcls-bad.d: New test.
* testsuite/gas/arm/mve-vcls-bad.l: New test.
* testsuite/gas/arm/mve-vcls-bad.s: New test.
* testsuite/gas/arm/mve-vclz-bad.d: New test.
* testsuite/gas/arm/mve-vclz-bad.l: New test.
* testsuite/gas/arm/mve-vclz-bad.s: New test.
* testsuite/gas/arm/mve-vfmas-bad.d: New test.
* testsuite/gas/arm/mve-vfmas-bad.l: New test.
* testsuite/gas/arm/mve-vfmas-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operands.
(parse_operands): Handle new operands.
(do_mve_vcmul): New encoding function.
(do_vcmla): Change to support MVE variants.
(do_vcadd): Change to support MVE variants.
(insns): Change existing to support MVE variants and add new.
* testsuite/gas/arm/mve-vcadd-bad-1.d: New test.
* testsuite/gas/arm/mve-vcadd-bad-1.l: New test.
* testsuite/gas/arm/mve-vcadd-bad-1.s: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.d: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.l: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.s: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.s: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operands.
(parse_operands): Handle new operands.
(enum vfp_or_neon_is_neon_bits): Moved
(vfp_or_neon_is_neon): Moved
(check_simd_pred_availability): Moved.
(do_neon_logic): Change to accept MVE variants.
(insns): Changed to accept MVE variants.
* testsuite/gas/arm/mve-vand-bad.d: New test.
* testsuite/gas/arm/mve-vand-bad.l: New test.
* testsuite/gas/arm/mve-vand-bad.s: New test.
* testsuite/gas/arm/mve-vbic-bad.d: New test.
* testsuite/gas/arm/mve-vbic-bad.l: New test.
* testsuite/gas/arm/mve-vbic-bad.s: New test.
* testsuite/gas/arm/mve-veor-bad.d: New test.
* testsuite/gas/arm/mve-veor-bad.l: New test.
* testsuite/gas/arm/mve-veor-bad.s: New test.
* testsuite/gas/arm/mve-vorn-bad.d: New test.
* testsuite/gas/arm/mve-vorn-bad.l: New test.
* testsuite/gas/arm/mve-vorn-bad.s: New test.
* testsuite/gas/arm/mve-vorr-bad.d: New test.
* testsuite/gas/arm/mve-vorr-bad.l: New test.
* testsuite/gas/arm/mve-vorr-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vaddlv, M_MNEM_vaddlva, M_MNEM_vaddv,
M_MNEM_vaddva): New instruction encodings.
(mve_encode_rq): New encoding helper function.
(do_mve_vaddlv): New encoding function.
(do_mve_vaddv): New encoding function.
* testsuite/gas/arm/mve-vaddlv-bad.d: New test.
* testsuite/gas/arm/mve-vaddlv-bad.l: New test.
* testsuite/gas/arm/mve-vaddlv-bad.s: New test.
* testsuite/gas/arm/mve-vaddv-bad.d: New test.
* testsuite/gas/arm/mve-vaddv-bad.l: New test.
* testsuite/gas/arm/mve-vaddv-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vadc, M_MNEM_vadci, M_MNEM_vbrsr):
New instruction encodings.
(do_mve_vadc): New encoding instruction.
(do_mve_vbrsr): Likewise.
(do_mve_vsbc): Likewise.
* testsuite/gas/arm/mve-vadc-bad.d: New test.
* testsuite/gas/arm/mve-vadc-bad.l: New test.
* testsuite/gas/arm/mve-vadc-bad.s: New test.
* testsuite/gas/arm/mve-vbrsr-bad.d: New test.
* testsuite/gas/arm/mve-vbrsr-bad.l: New test.
* testsuite/gas/arm/mve-vbrsr-bad.s: New test.
* testsuite/gas/arm/mve-vsbc-bad.d: New test.
* testsuite/gas/arm/mve-vsbc-bad.l: New test.
* testsuite/gas/arm/mve-vsbc-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (MVE_BAD_QREG): New error message.
(enum operand_parse_code): Define new operand.
(parse_operands): Handle new operand.
(do_mve_vpt): Change for VPT blocks.
(NEON_SHAPE_DEF): New shape.
(neon_logbits): Moved.
(LOW4): Moved
(HI1): Moved
(mve_get_vcmp_vpt_cond): New function to translate vpt conditions.
(do_mve_vcmp): New encoding function.
(do_vfp_nsyn_cmp): Changed to support MVE variants.
(insns): Change to support MVE variants of vcmp and add vpt.
* testsuite/gas/arm/mve-vcmp-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmp-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmp-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.s: New test.
* testsuite/gas/arm/mve-vpt-bad-1.d: New test.
* testsuite/gas/arm/mve-vpt-bad-1.l: New test.
* testsuite/gas/arm/mve-vpt-bad-1.s: New test.
* testsuite/gas/arm/mve-vpt-bad-2.d: New test.
* testsuite/gas/arm/mve-vpt-bad-2.l: New test.
* testsuite/gas/arm/mve-vpt-bad-2.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct arm_it): Expand isscalar field to be able to
distinguish between types of scalar.
(parse_typed_reg_or_scalar): Change to accept MVE scalar variants.
(parse_scalar): Likewise.
(parse_neon_mov): Accept MVE variant.
(po_scalar_or_goto): Make use reg_type.
(parse_operands): Change uses of po_scalar_or_goto.
(do_vfp_sp_monadic): Change to accept MVE variants.
(do_vfp_reg_from_sp): Likewise.
(do_vfp_sp_from_reg): Likewise.
(do_vfp_dp_rd_rm): Likewise.
(do_vfp_dp_rd_rn_rm): Likewise.
(do_vfp_dp_rm_rd_rn): Likewise.
(M_MNEM_vmovlt, M_MNEM_vmovlb, M_MNEM_vmovnt, M_MNEM_vmovnb): New
instruction encodings.
(NEON_SHAPE_DEF): New shape.
(do_mve_mov): New encoding fuction.
(do_mve_movn): Likewise.
(do_mve_movl): Likewise.
(do_neon_mov): Change to accept MVE variants.
(mcCE): New MACRO.
(insns): Accept new MVE variants and instructions.
* testsuite/gas/arm/mve-vmov-bad-1.d: New test.
* testsuite/gas/arm/mve-vmov-bad-1.l: New test.
* testsuite/gas/arm/mve-vmov-bad-1.s: New test.
* testsuite/gas/arm/mve-vmov-bad-2.d: New test.
* testsuite/gas/arm/mve-vmov-bad-2.l: New test.
* testsuite/gas/arm/mve-vmov-bad-2.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(do_neon_cvt_1): Handle MVE variants.
(do_neon_cvttb_1): Likewise.
(insns): Accept MVE variants.
* testsuite/gas/arm/mve-vcvt-bad-1.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-1.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-1.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.s: New test.
* testsuite/gas/arm/mve-vcvt-bad.d: New test.
* testsuite/gas/arm/mve-vcvt-bad.l: New test.
* testsuite/gas/arm/mve-vcvt-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct arm_it): Make immisreg field larger to hold
type of register.
(enum shift_kind): Add SHIFT_UXTW shift kind.
(enum parse_shift_mode): Add SHIFT_UXTW_IMMEDIATE shift mode.
(parse_shift): Handle new shift type.
(parse_address_main): Accept new addressing modes.
(M_MNEM_vstrb, M_MNEM_vstrh, M_MNEM_vstrw, M_MNEM_vstrd,
M_MNEM_vldrb, M_MNEM_vldrh, M_MNEM_vldrw, M_MNEM_vldrd): New
instruction encodings.
(do_mve_vstr_vldr_QI): New encoding functions.
(do_mve_vstr_vldr_RQ): Likewise.
(do_mve_vstr_vldr_RI): Likewise.
(do_mve_vstr_vldr): Likewise.
* testsuite/gas/arm/mve-vldr-bad-1.d: New test.
* testsuite/gas/arm/mve-vldr-bad-1.l: New test.
* testsuite/gas/arm/mve-vldr-bad-1.s: New test.
* testsuite/gas/arm/mve-vldr-bad-2.d: New test.
* testsuite/gas/arm/mve-vldr-bad-2.l: New test.
* testsuite/gas/arm/mve-vldr-bad-2.s: New test.
* testsuite/gas/arm/mve-vldr-bad-3.d: New test.
* testsuite/gas/arm/mve-vldr-bad-3.l: New test.
* testsuite/gas/arm/mve-vldr-bad-3.s: New test.
* testsuite/gas/arm/mve-vstr-bad-1.d: New test.
* testsuite/gas/arm/mve-vstr-bad-1.l: New test.
* testsuite/gas/arm/mve-vstr-bad-1.s: New test.
* testsuite/gas/arm/mve-vstr-bad-2.d: New test.
* testsuite/gas/arm/mve-vstr-bad-2.l: New test.
* testsuite/gas/arm/mve-vstr-bad-2.s: New test.
* testsuite/gas/arm/mve-vstr-bad-3.d: New test.
* testsuite/gas/arm/mve-vstr-bad-3.l: New test.
* testsuite/gas/arm/mve-vstr-bad-3.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (BAD_MVE_AUTO): New error message.
(BAD_MVE_SRCDEST): Likewise.
(mark_feature_used): Diagnose MVE only instructions when in
auto-detection mode or -march=all.
(enum operand_parse_code): Define new operand.
(parse_operands): Handle new operand.
(M_MNEM_vmullt, M_MNEM_vmullb): New encodings.
(mve_encode_qqq): New encoding helper function.
(do_mve_vmull): New encoding function.
(insns): Handle new instructions.
* testsuite/gas/arm/mve-vmullbt-bad.d: New test.
* testsuite/gas/arm/mve-vmullbt-bad.l: New test.
* testsuite/gas/arm/mve-vmullbt-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct asm_opcode): Make avalue a full int.
(BAD_ODD, BAD_EVEN, BAD_SIMD_TYPE): New errors.
(enum operand_parse_code): Handle new operands.
(parse_operands): Likewise.
(M_MNEM_vabav, M_MNEM_vmladav, M_MNEM_vmladava, M_MNEM_vmladavx,
M_MNEM_vmladavax, M_MNEM_vmlsdav, M_MNEM_vmlsdava, M_MNEM_vmlsdavx,
M_MNEM_vmlsdavax): Define new encodings.
(NEON_SHAPE_DEF): Add new shape.
(neon_check_type): Use BAD_SIMD_TYPE.
(mve_encode_rqq): New encoding helper function.
(do_mve_vabav, do_mve_vmladav): New encoding functions.
(mCEF): New MACRO.
* testsuite/gas/arm/mve-vabav-bad.d: New test.
* testsuite/gas/arm/mve-vabav-bad.l: New test.
* testsuite/gas/arm/mve-vabav-bad.s: New test.
* testsuite/gas/arm/mve-vmladav-bad.d: New test.
* testsuite/gas/arm/mve-vmladav-bad.l: New test.
* testsuite/gas/arm/mve-vmladav-bad.s: New test.
* testsuite/gas/arm/mve-vmlav-bad.d: New test.
* testsuite/gas/arm/mve-vmlav-bad.l: New test.
* testsuite/gas/arm/mve-vmlav-bad.s: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.d: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.l: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_abs_neg): Make it accept MVE variant.
(insns): Change vabs and vneg entries to accept MVE variants.
* testsuite/gas/arm/mve-vabsneg-bad-1.d: New test.
* testsuite/gas/arm/mve-vabsneg-bad-1.l: New test.
* testsuite/gas/arm/mve-vabsneg-bad-1.s: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.d: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.l: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.s: New test.
bfd/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Add case for Tag_MVE_arch.
binutils/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* readelf.c (arm_attr_tag_MVE_arch): New array for Tag_MVE_arch values.
(arm_attr_public_tag arm_attr_public_tags): Add case for Tag_MVE_arch.
elfcpp/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* arm.h (Tag_MVE_arch): Define new enum value.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (mve_ext, mve_fp_ext): New features.
(armv8_1m_main_ext_table): Add new extensions.
(aeabi_set_public_attributes): Translate new features to new build attributes.
(arm_convert_symbolic_attribute): Add Tag_MVE_arch.
* doc/c-arm.texi: Document new extensions and new build attribute.
include/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* elf/arm.h (Tag_MVE_arch): Define new enum value.
* opcode/arm.h (FPU_MVE, FPU_MVE_FP): New MACROs for new features.
Add a new machine dependent option to set a prefix for register names.
gas/
* config/tc-s12z.c (register_prefix): New variable. (md_show_usage,
md_parse_option): parse the new option.
(lex_reg_name): Scan the prefix if one is set.
* doc/c-s12z.texi (S12Z-Opts): Document the new option.
* testsuite/gas/s12z/reg-prefix.d: New file.
* testsuite/gas/s12z/reg-prefix.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
This adds another test for file numbers given in .file directives,
checking that the value can be represented as an unsigned int and that
a memory allocation expression doesn't overflow. I removed a test
added recently since an earlier test (num < 1) already covers the
(num < 0) case.
* dwarf2dbg.c: Whitespace fixes.
(get_filenum): Don't strdup "file". Adjust error message.
(dwarf2_directive_filename): Use an unsigned type for "num".
Catch truncation of file number and overflow of get_filenum
XRESIZEVEC multiplication. Delete dead code.
git commit 3076e59490 caused
tic54x-coff +FAIL: c54x subsym assignment/use
PR 24538
* config/tc-tic54x.c (tic54x_start_line_hook): Do skip end of line
chars in setting endp.
PR 24538
gas * macro.c (get_any_string): Increase size of buffer used to hold
decimal value of expression result.
* dw2gencfi.c (get_debugseg_name): Handle an empty name.
* dwarf2dbg.c (get_filenum): Catch integer wraparound when
extending allocate file array.
(dwarf2_directive_filename): Add extra checks of the computed file
number.
* config/tc-arm.c (arm_tc_equal_in_insn): Insert copy of name into
warning hash table.
(s_arm_eabi_attribute): Check for obj_elf_vendor_attribute
returning -1.
* config/tc-i386.c (i386_output_nops): Catch an attempt to
generate nops of negative lengths.
* as.h (MAX_LITTLENUMS): Move definition to here from...
* config/atof-ieee.c: ...here.
* config/tc-aarch64.c: ...here.
* config/tc-arc.c: ...here.
* config/tc-arm.c: ...here.
* config/tc-epiphany.c: ...here.
* config/tc-i386.c: ...here.
* config/tc-ia64.c: ...here. (And correct the value).
* config/tc-m32c.c: ...here.
* config/tc-m32r.c: ...here.
* config/tc-metag.c: ...here.
* config/tc-microblaze.c: ...here.
* config/tc-nds32.c: ...here.
* config/tc-or1k.c: ...here.
* config/tc-score.c: ...here.
* config/tc-score7.c: ...here.
* config/tc-tic4x.c: ...here.
* config/tc-tilegx.c: ...here.
* config/tc-tilepro.c: ...here.
* config/tc-visium.c: ...here.
* config/tc-sh.c (md_assemble): Add check for an instruction with
no opcodes.
* config/tc-mips.c (mips_lookup_insn): Add check for very short
instruction name.
* config/tc-tic54x.c: Use unsigned chars to access is_end_of_line
array.
(tic54x_start_line_hook): Check for an empty line.
(next_line_shows_parallel): Do not walk off the end of the string.
(tic54x_macro_start): Check for too much macro nesting.
(tic54x_start_label): Add label_start parameter. Use this
parameter to check the first character of the label.
* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Pass
line_start variable to tic54x_start_label.
PR 24538
opcodes * ia64-opc.c (ia64_find_matching_opcode): Check for reaching the
end of the table prematurely.
Release 6 of the MIPS architecture does not have an ADDI instruction.
ADD/SUB instructions with immediate operands can be expanded to load
and immediate value and then perform the operation.
gas/
* config/tc-mips.c (macro) <M_ADD_I, M_SUB_I, M_DADD_I, M_DSUB_I>:
Add expansions for MIPS r6.
* testsuite/gas/mips/add.s: Enable tests for R6.
* testsuite/gas/mips/daddi.s: Annotate to test DADD for R6.
* testsuite/gas/mips/mipsr6@add.d: Likewise.
* gas/testsuite/gas/mips/mipsr6@dadd.d: New test.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
opcodes/
* mips-opc.c (mips_opcodes): Enable ADD, SUB, DADD and DSUB
macros for R6.
opcodes/
* ppc-dis.c (skip_optional_operands): Change return type and returns.
(print_insn_powerpc) <skip_optional>: Change type.
Call skip_optional_operands if we have not skipped any operands.
gas/
* testsuite/gas/ppc/476.d: Update expected output.
* testsuite/gas/ppc/power6.d: Likewise.
My testcase matched against a file format of elf64-littleaarch64 in the
objdump output. This was unnecessarily restrictive and causes testcase
failures on aarch64_be.
Here we remove that restriction.
Committed as obvious.
Testing done on aarch64_be-none-elf gas to see the failure goes away.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/sve2.d: Remove file format restriction.
Add tests that SVE2 instructions are encoded as they should be, and
tests that invalid instructions have their problems reported.
Also check that each sve2 cryptographic extension is required to use the
corresponding cryptographic instructions.
Finally, test to ensure that sve2 instructions using mnemonics that
exist in sve1 still need the sve2 feature to be used.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: New test.
* testsuite/gas/aarch64/illegal-sve2-bitperm.d: New test.
* testsuite/gas/aarch64/illegal-sve2-sha3.d: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2-sm4.d: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2-sve1ext.d: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2-sve1ext.l: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2.d: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2.l: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2.s: Test new instructions.
* testsuite/gas/aarch64/sve1-extended-sve2.s: New test.
* testsuite/gas/aarch64/sve2.d: Test new instructions.
* testsuite/gas/aarch64/sve2.s: Test new instructions.
New operand describes a shift-left immediate encoded in bits
22:20-19:18-16 where UInt(bits) - esize == shift.
This operand is useful for instructions like sshllb.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22
operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHLIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22
operand.
This includes defining a new single bit field SVE_i2h at position 20.
SVE_Zm4_11_INDEX handles indexed Zn registers where the index is encoded
in bits 20:11 and the register is chosed from range z0-z15 in bits 19-16.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_Zm4_11_INDEX
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm4_11_INDEX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_Zm4_11_INDEX.
(aarch64_print_operand): Add printing for SVE_Zm4_11_INDEX.
(fields): Handle SVE_i2h field.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_i2h field.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm4_11_INDEX operand.
Include a new iclass to extract the variant from the most significant 3
bits of this operand.
Instructions such as rshrnb include a constant shift amount as an
operand, where the most significant three bits of this operand determine
what size elements the instruction is operating on.
The new SVE_SHRIMM_UNPRED_22 operand denotes this constant encoded in
bits 22:20-19:18-16 while the new sve_shift_tsz_hsd iclass denotes that
the SVE qualifier is encoded in bits 22:20-19.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHRIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHRIMM_UNPRED_22
operand.
(enum aarch64_insn_class): Add sve_shift_tsz_hsd iclass.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-asm.c (aarch64_ins_sve_shrimm):
(aarch64_encode_variant_using_iclass): Handle
sve_shift_tsz_hsd iclass encode.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Handle
sve_shift_tsz_hsd iclass decode.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHRIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHRIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHRIMM_UNPRED_22
operand.
Add AARCH64_OPND_SVE_ADDR_ZX operand that allows a vector of addresses
in a Zn register, offset by an Xm register.
This is used with scatter/gather SVE2 instructions.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (REG_ZR): Macro specifying zero register.
(parse_address_main): Account for new addressing mode [Zn.S, Xm].
(parse_operands): Handle new SVE_ADDR_ZX operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_ADDR_ZX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_ADDR_ZX.
(aarch64_print_operand): Add printing for SVE_ADDR_ZX.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_ADDR_ZX operand.
Introduce new operand SVE_Zm3_11_INDEX that indicates a register between
z0-z7 stored in bits 18-16 and an index stored in bits 20-19:11.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_Zm3_11_INDEX
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_Zm3_11_INDEX operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_Zm3_11_INDEX.
(aarch64_print_operand): Add printing for SVE_Zm3_11_INDEX.
(fields): Handle SVE_i3l and SVE_i3h2 fields.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_i3l and SVE_i3h2
fields.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_Zm3_11_INDEX operand.
New operand AARCH64_OPND_SVE_IMM_ROT3 handles a single bit rotate
operand encoded at bit position 10.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_IMM_ROT3 operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_IMM_ROT3 operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_IMM_ROT3.
(aarch64_print_operand): Add printing for SVE_IMM_ROT3.
(fields): Handle SVE_rot3 field.
* aarch64-opc.h (enum aarch64_field_kind): New SVE_rot3 field.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_IMM_ROT3 operand.
Include all feature flag macros.
The "sve2" extension that enables the core sve2 instructions.
This also enables the sve extension, since sve is a requirement of sve2.
Extra optional sve2 features are the bitperm, sm4, aes, and sha3 extensions.
These are all given extra feature flags, "bitperm", "sve2-sm4",
"sve2-aes", and "sve2-sha3" respectively.
The sm4, aes, and sha3 extensions are explicitly marked as sve2
extensions to distinguish them from the corresponding NEON extensions.
Rather than continue extending the current feature flag numbers, I used
some bits that have been skipped.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c: Add command line architecture feature flags
"sve2", "sve2-sm4", "sve2-aes", "sve2-sha3", "bitperm".
* doc/c-aarch64.texi: Document new architecture feature flags.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SVE2
AARCH64_FEATURE_SVE2_AES, AARCH64_FEATURE_SVE2_BITPERM,
AARCH64_FEATURE_SVE2_SM4, AARCH64_FEATURE_SVE2_SHA3): New
feature macros.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-tbl.h
(aarch64_feature_sve2, aarch64_feature_sve2aes,
aarch64_feature_sve2sha3, aarch64_feature_sve2sm4,
aarch64_feature_sve2bitperm): New feature sets.
(SVE2, SVE2_AES, SVE2_SHA3, SVE2_SM4, SVE2_BITPERM): New macros
for feature set addresses.
(SVE2_INSN, SVE2_INSNC, SVE2AES_INSN, SVE2SHA3_INSN,
SVE2SM4_INSN, SVE2SM4_INSNC, SVE2BITPERM_INSN): New macros.
Make them work for tile, by using ".quad 0" as the simulated
instruction and doubling size of aligns. The larger aligns tripped
over riscv alignment handling, fixed by adding -mno-relax there.
Also disable link-relax for avr, pru and xtensa, allowing these
targets to pass these tests. With link-time relaxation enabled,
these targets emit alignment relocations rather than aligning at
assembly time. This means the assembler doesn't see a change in PC
when it is expected over an alignment frag and thus view numbers are
calculated incorrectly.
* testsuite/gas/elf/dwarf2-1.s,
* testsuite/gas/elf/dwarf2-2.s,
* testsuite/gas/elf/dwarf2-5.s,
* testsuite/gas/elf/dwarf2-7.s,
* testsuite/gas/elf/dwarf2-8.s,
* testsuite/gas/elf/dwarf2-9.s,
* testsuite/gas/elf/dwarf2-10.s,
* testsuite/gas/elf/dwarf2-11.s,
* testsuite/gas/elf/dwarf2-12.s,
* testsuite/gas/elf/dwarf2-13.s,
* testsuite/gas/elf/dwarf2-14.s,
* testsuite/gas/elf/dwarf2-15.s,
* testsuite/gas/elf/dwarf2-16.s,
* testsuite/gas/elf/dwarf2-17.s,
* testsuite/gas/elf/dwarf2-18.s,
* testsuite/gas/elf/dwarf2-19.s: Double size of align and simulated
instructions.
* testsuite/gas/elf/dwarf2-1.d,
* testsuite/gas/elf/dwarf2-2.d,
* testsuite/gas/elf/dwarf2-5.d,
* testsuite/gas/elf/dwarf2-7.d,
* testsuite/gas/elf/dwarf2-8.d,
* testsuite/gas/elf/dwarf2-9.d,
* testsuite/gas/elf/dwarf2-10.d,
* testsuite/gas/elf/dwarf2-11.d,
* testsuite/gas/elf/dwarf2-12.d,
* testsuite/gas/elf/dwarf2-13.d,
* testsuite/gas/elf/dwarf2-14.d,
* testsuite/gas/elf/dwarf2-15.d,
* testsuite/gas/elf/dwarf2-16.d,
* testsuite/gas/elf/dwarf2-17.d,
* testsuite/gas/elf/dwarf2-18.d,
* testsuite/gas/elf/dwarf2-19.d: Use xfail rather than notarget.
Remove avr, pru, tile, xtensa from xfails. Update expected output.
* testsuite/gas/elf/elf.exp: Sort targets.
(dump_opts): Pass {as -mno-relax} for riscv, {as -mno-link-relax}
for avr and pru, and {as --no-link-relax} for xtensa to dwarf tests.
* testsuite/gas/elf/section2.e-miwmmxt: Delete unused file.
md_begin happens after md_parse_option.
* config/tc-xtensa.c (opt_linkrelax): New variable.
(md_parse_option): Set it here.
(md_begin): Copy opt_linkrelax to linkrelax.
Expressions that compute view numbers that aren't simplified early
enough to a constant end up being selected for representation as
complex relocations, enabled on mep-* targets.
It would be possible to recognize such expressions, that can resolve
to constants, but this problem was hit before, in preexisting tests,
so xfail the new hits similarly.
The new hits were caused by yesterday's patch to dwarf2dbg.c: views in
the beginning of subsections are now computed later, based on the
final views or previous subsections in the same section.
for gas/ChangeLog
* testsuite/gas/elf/dwarf2-18.d: Xfail mep-*.
* testsuite/gas/elf/dwarf2-19.d: Likewise.
Since I was looking at this I decided to fix the formatting, and
used an old C switch statements trick to factor out common code.
* symbols.c (use_complex_relocs_for): Formatting. Factor out
X_add_symbol tests.
Add paired load-link and store-conditional instructions to the
EVA ASE for MIPS32R6[1]. These instructions are optional within
the EVA ASE. Their presence is indicated by the XNP bit in the
Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 230-231, pp. 357-360.
gas/
* config/tc-mips.c (mips_set_ase): Handle ASE_EVA_R6.
(macro) <M_LLWPE_AB, M_SCWPE_AB>: New cases.
(mips_after_parse_args): Translate EVA to EVA_R6.
* testsuite/gas/mips/ase-errors-1.s: Add new instructions.
* testsuite/gas/mips/eva.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Check errors for
new instructions.
* testsuite/gas/mips/mipsr6@eva.d: Check new test cases.
include/
* opcode/mips.h (ASE_EVA_R6): New macro.
(M_LLWPE_AB, M_SCWPE_AB): New enum values.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Add ISA
argument and set ASE_EVA_R6 appropriately.
(set_default_mips_dis_options): Pass ISA to above.
(parse_mips_dis_option): Likewise.
* mips-opc.c (EVAR6): New macro.
(mips_builtin_opcodes): Add llwpe, scwpe.
Derived from patch authored by Andrew Bennett <andrew.bennett@imgtec.com>
GOT and PLT relocs shouldn't have their symbols replaced with a
section symbol plus added. Nor should the HIGHA TLS relocations,
which failed to be caught by the range test in ppc_fix_adjustable.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA),
(BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA):
Sort before BFD_RELOC_PPC64_DTPREL16_HIGHESTA entry.
gas/
* config/tc-ppc.c (ppc_fix_adjustable): Exclude all GOT and PLT
relocs, and VLE sdarel relocs.
* testsuite/gas/ppc/power4.d: Adjust.
Location views at borders between subsegments/subsections in the same
segment/section are computed as if each new subsegment/subsection
started with a forced view reset to zero, but the line number program
does not introduce resets that are not explicitly requested, so if a
subsegment ends at the same address another starts, the line number
program will have a continuity of views at the border address, whereas
the initial view number label in the latter subsegment will be
miscomputed as zero.
This patch delays the assignment of view expressions at subsegment
heads to the time of chaining the frags of subsegments into a single
segment, so that they are set based on the view at the end of the
previous subsegment in the same segment.
The line number program created for the test program had an
unnecessary DW_LNS_advance_pc at the end. This patch also arranges
for us not to emit it.
for gas/ChangeLog
* dwarf2dbg.c (set_or_check_view): Skip heads when assigning
views of prior locs.
(dwarf2_gen_line_info_1): Skip heads.
(size_inc_line_addr, emit_inc_line_addr): Drop
DW_LNS_advance_pc for zero addr delta.
(dwarf2_finish): Assign views for heads of segments.
* testsuite/gas/elf/dwarf2-19.d: New.
* testsuite/gas/elf/dwarf2-19.s: New.
* testsuite/gas/elf/elf.exp: Test it.
m32c_md_end attempted to pad out a code section with nops, but this
was just plain wrong in many ways:
- The padding didn't happen at all if the last section emitted wasn't
a code section.
- The padding went to the wrong place if subsections were used, and
the last subseg used wasn't the highest numbered subseg.
- Padding wasn't added to all code sections.
- If the last section was empty, it was padded to 4 bytes.
- The padding didn't go to a 4-byte alignment boundary, instead it
effectively made the last instruction 4 bytes in size.
- The padding didn't take into account that code sections may have
contents other than machine instructions.
So, rip it out and handle nop padding properly, also fixing .align
.balign/.p2align in the middle of code.
gas/
* config/tc-m32c.c (insn_size): Delete static var.
(md_begin): Don't set it.
(m32c_md_end): Delete.
(md_assemble): Add insn_size auto var.
* config/tc-m32c.h (md_end): Don't define.
(m32c_md_end): Delete.
(NOP_OPCODE, HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): Define.
* testsuite/gas/all/align.d: Remove m32c from notarget list.
* testsuite/gas/all/incbin.d: Likewise.
* testsuite/gas/elf/dwarf2-11.d: Likewise.
* testsuite/gas/macros/semi.d: Likewise.
* testsuite/gas/all/gas.exp (do_comment): Similarly.
ld/
* testsuite/ld-scripts/fill.d: Don't xfail m32c
* testsuite/ld-scripts/fill16.d: Likewise.
The .code16gcc directive to support 16-bit mode with 32-bit address.
For IRET without a suffix, generate 16-bit IRET with a warning to
return from an interrupt handler in 16-bit mode.
PR gas/24485
* config/tc-i386.c (process_suffix): Issue a warning to IRET
without a suffix for .code16gcc.
* testsuite/gas/i386/jump16.s: Add tests for iretX.
* testsuite/gas/i386/jump16.d: Updated.
* testsuite/gas/i386/jump16.e: New file.
This patch enables the new Transactional Memory Extension added recently
as part of Arm's new architecture technologies.
We introduce a new optional extension "tme" to enable this. The following
instructions are part of the extension:
* tstart <Xt>
* ttest <Xt>
* tcommit
* tcancel #<imm>
The ISA for the above can be found here:
https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order
*** gas/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_features): Add "tme".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/tme-invalid.d: New test.
* testsuite/gas/aarch64/tme-invalid.l: New test.
* testsuite/gas/aarch64/tme-invalid.s: New test.
* testsuite/gas/aarch64/tme.d: New test.
* testsuite/gas/aarch64/tme.s: New test.
*** include/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_TME): New.
(enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16.
*** opcodes/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_IMM_NIL): New.
(TME): New.
(_TME_INSN): New.
(struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
Add several baseline MIPS32R6[1] and MIPS64R6[2] instructions
that were omitted from the initial spec. These instructions
are optional in implementations but not associated with any
ASE or pseudo-ASE. Their presence is indicated by the XNP bit
in the Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 228-229, pp. 354-357.
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 289-290 and pp. 458-460.
gas/
* config/tc-mips.c (macro) <M_LLWP_AB, M_LLDP_AB, M_SCWP_AB,
M_SCDP_AB>: New cases and expansions for paired instructions.
* testsuite/gas/mips/llpscp-32.s: New test source.
* testsuite/gas/mips/llpscp-64.s: Likewise.
* testsuite/gas/mips/llpscp-32.d: New test.
* testsuite/gas/mips/llpscp-64.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
* testsuite/gas/mips/r6.s: Add new instructions to test source.
* testsuite/gas/mips/r6-64.s: Likewise.
* testsuite/gas/mips/r6-64-n32.d: Check new instructions.
* testsuite/gas/mips/r6-64-n64.d: Likewise.
* testsuite/gas/mips/r6-n32.d: Likewise.
* testsuite/gas/mips/r6-n64.d: Likwwise.
* testsuite/gas/mips/r6.d: Likewise.
include/
* opcode/mips.h (M_LLWP_AB, M_LLDP_AB): New enum values.
(M_SCWP_AB, M_SCDP_AB): Likewise.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add llwp, lldp, scwp, scdp.
The .code16gcc directive supports 16bit mode with 32-bit address. Since
IRET (opcode 0xcf) in 16bit mode returns from an interrupt in 16bit mode,
we shouldn't add 0x66 prefix for IRET.
PR gas/24485
* config/tc-i386.c (process_suffix): Don't add DATA_PREFIX_OPCODE
to IRET for .code16gcc.
* testsuite/gas/i386/jump16.s: Add IRET tests.
* testsuite/gas/i386/jump16.d: Updated.
Targets such as xtensa incur a much higher overhead to resolve
location view numbers than e.g. x86, because the expressions used to
compute view numbers cannot be resolved soon enough.
Each view number is computed by incrementing the previous view, if
they are both at the same address, or by resetting it to zero
otherwise. If PV is the previous view number, PL is its location, and
NL is the location of the next view, its number is computed by
evaluating NV = !(NL > PL) * (PV + 1).
set_or_check_view uses resolve_expression to decide whether portions
of this expression can be simplified to constants. The (NL > PL)
subexpression is one that can often be resolved to a constant,
breaking chains of view number computations at instructions of nonzero
length, but not after alignment that might be unnecessary.
Alas, when nearly every frag ends with a relaxable instruction,
frag_offset_fixed_p will correctly fail to determine a known offset
between two unresolved addresses in neighboring frags, so the
unresolved symbolic operation will be constructed and used in the
computation of most view numbers. This results in very deep
expressions.
As view numbers get referenced in location view lists, each operand in
the list goes through symbol_clone_if_forward_ref, which recurses on
every subexpression. If each view number were to be referenced, this
would exhibit O(n^2) behavior, where n is the depth of the view number
expressions, i.e., the length of view number sequences without an
early resolution that cuts the expression short.
This patch enables address compares used by view numbering to be
resolved even when exact offsets are not known, using new logic to
determine when the location either remained the same or changed for
sure, even with the possibility of relaxation. This enables most view
number expressions to be resolved with a small, reasonable depth.
PR gas/24444
* frags.c (frag_gtoffset_p): New.
* frags.h (frag_gtoffset_p): Declare it.
* expr.c (resolve_expression): Use it.
In most cases we don't want expression symbols, such as that created
for an expression like "symbol + (1f - .)", resolved down to a
constant. Instead we'd like to leave the expression as "symbol +
constant" once the "1f - ." part has been resolved, and let the
backend decide whether "symbol" can be reduced further.
However, that doesn't work when trying to resolve .loc view symbols
early. We get expression symbols left as an O_symbol expression
pointing at an absolute symbol, and marked as sy_flags.sy_resolved.
That wouldn't really be a problem, but when one of those expression
symbols is used in further .loc view expressions, its value is taken
as zero.
This patch fixes the symbol value mistake, and stops creation of
O_symbol expression symbols pointing to absolute symbols. Either of
these fixes would cure the .loc view usage.
PR 24444
* symbols.c (resolve_symbol_value): When handling symbols
marked as sy_flags.resolved, return correct value for the
case of expression symbols left as an O_symbol expression.
Merge O_symbol code handling undefined and common symbols with
code handling special cases of expression symbols. Use
seg_left to test for undefined and common symbols. Don't
leave an O_symbol expression when X_add_symbol resolves to
the absolute_section. Init final_val later.
* testsuite/gas/mmix/basep-7.d: Adjust expected output.
PR 24464
* config/tc-rx.h (md_relax_frag): Pass the max_iterations variable
to the relaxation function.
* config/tc-rx.c (rx_relax_frag): Add new parameter - the maximum
number of iterations. Make sure that our internal iteration limit
does not exceed this external iteration limit.
gas * config/tc-msp430.c (msp430_make_init_symbols): Define
__crt0_run_{preinit,init,fini}_array symbols if
.{preinit,init,fini}_array sections exist.
* testsuite/gas/msp430/fini-array.d: New test.
* testsuite/gas/msp430/init-array.d: New test.
* testsuite/gas/msp430/preinit-array.d: New test.
* testsuite/gas/msp430/fini-array.s: New test source.
* testsuite/gas/msp430/init-array.s: New test source.
* testsuite/gas/msp430/preinit-array.s: New test source.
* testsuite/gas/msp430/msp430.exp: Add new tests to driver.
* config/tc-msp430.c (msp430_make_init_symbols): Define __crt0_init_bss
symbol when .lower.bss or .either.bss sections exist.
Define __crt0_movedata when .lower.data or .either.data sections exist.
* testsuite/gas/msp430/either-data-bss-sym.d: New test.
* testsuite/gas/msp430/low-data-bss-sym.d: New test.
* testsuite/gas/msp430/either-data-bss-sym.s: New test source.
* testsuite/gas/msp430/low-data-bss-sym.s: New test source.
* testsuite/gas/msp430/msp430.exp: Run new tests.
Enable large code model when running -mdata-region={upper,either}
tests.
gas * config/tc-msp430.c (options): New OPTION_UNKNOWN_INTR_NOPS,
OPTION_NO_UNKNOWN_INTR_NOPS and do_unknown_interrupt_nops.
(md_parse_option): Handle OPTION_UNKNOWN_INTR_NOPS and
OPTION_NO_UNKNOWN_INTR_NOPS by setting do_unknown_interrupt_nops
accordingly.
(md_show_usage): Likewise.
(md_shortopts): Add "mu" for OPTION_UNKNOWN_INTR_NOPS and
"mU" for OPTION_NO_UNKNOWN_INTR_NOPS.
(md_longopts): Likewise.
(warn_eint_nop): Update comment.
(warn_unsure_interrupt): Don't warn if prev_insn_is_nop or
prev_insn_is_dint or we are assembling for 430 ISA.
(msp430_operands): Only call warn_unsure_interrupt if
do_unknown_interrupt_nops == TRUE.
* testsuite/gas/msp430/nop-unknown-intr.s: New test source file.
* testsuite/gas/msp430/nop-unknown-intr-430.d: New test.
* testsuite/gas/msp430/nop-unknown-intr-430x.d: New test.
* testsuite/gas/msp430/nop-unknown-intr-430x-ignore.d: New test.
* testsuite/gas/msp430/nop-unknown-intr-430.l: Warning output for new
test.
* testsuite/gas/msp430/nop-unknown-intr-430x.l: Likewise.
* testsuite/gas/msp430/msp430.exp: Add new tests to driver.
Some of these tests were excluded for ns32k-netbsd, exclude for all
ns32k instead.
binutils/
* testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
* testsuite/binutils-all/copy-3.d: Likewise.
gas/
* testsuite/gas/all/gas.exp: Remove ns32k xfails.
* testsuite/gas/all/weakref1u.d: Don't run for ns32k-*-*.
ld/
* testsuite/ld-scripts/pr20302.d: Don't run for ns32k-*-*.
* testsuite/ld-scripts/section-match-1.d: Likewise.
* testsuite/ld-undefined/require-defined.exp: Likewise.
These are only used by dlx and ns32k.
* write.h: Don't include bit_fix.h.
(struct fix): Rearrange some fields. Delete fx_im_disp and
fx_bit_fixP. Use bitfields for fx_size and fx_pcrel_adjust.
* write.c (fix_new_internal): Don't init fx_im_disp and fx_bit_fixP.
(fixup_segment): Don't exclude overflow checks on fx_bit_fixP.
(print_fixup): Don't print im_disp.
* config/tc-cris.c (md_apply_fix): Remove tests of fx_bit_fixP
and fx_im_disp.
* config/tc-dlx.c (md_apply_fix): Remove wrong debug code. Set
fx_no_overflow when fx_bit_fixP.
* config/tc-dlx.h: Include bit_fix.h.
(TC_FIX_TYPE, tc_fix_data, TC_INIT_FIX_DATA): Define.
* config/tc-ns32k.c (fix_new_ns32k, fix_new_ns32k_exp): Set
fx_no_overflow when bit_fixP.
* config/tc-ns32k.h (TC_FIX_TYPE): Add fx_bit_fixP and fx_im_disp.
(fix_im_disp, fix_bit_fixP): Adjust to suit.
(TC_INIT_FIX_DATA, TC_FIX_DATA_PRINT): Likewise.
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case.
Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg ().
A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match.
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal
relocation.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (parse_sys_vldr_vstr): New function.
(OP_VLDR): New enum operand_parse_code enumerator.
(parse_operands): Add logic for OP_VLDR.
(do_t_vldr_vstr_sysreg): New function.
(do_vldr_vstr): Likewise.
(insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode.
(md_apply_fix): Add bound check for VLDR and VSTR co-processor offset.
Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad
uses of VLDR and VSTR.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for
above bad uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and
VSTR valid uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the
above examples.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (coprocessor_opcodes): Document new %J and %K format
specifier. Add entries for VLDR and VSTR of system registers.
(print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in
coprocessor instructions on Armv8.1-M Mainline targets. Add handling
of %J and %K format specifier.
Like for CLRM, this patch aims to share as much logic with the similar looking VLDM/VSTM. This is achieved by adding 2 new enumerator values in enum reg_list_els for the single-precision and double-precision variants of VSCCLRM and extending parse_vfp_reg_list () to deal with these types.
These behave like the existing REGLIST_VFP_S and REGLIST_VFP_D types with extra logic to expect VPR as the last element in the register list.
The function is algo augmented with a new partial_match parameter to indicate if any register other than VPR had already been parsed in the register list so as to not try parsing the second variant if that's the case and return the right error message.
The rest of the patch is the usual encoding function, new disassembler table entries and format specifier and parsing, encoding and disassembling tests.
It is worth mentioning that the new entry in the disassembler table was added in the coprocessor-related table despite VSCCLRM always being available even in FPU-less configurations. The main reason for this is that VSCCLRM also match VLDMIA entry and must thus be tried first but coprocessor entries are tried before T32 entries. It also makes sense because it is in the same encoding space as coprocessor and VFP instructions and is thus the natural place for someone to look for this instruction.
Note: Both variants of VSCCLRM support D16-D31 registers but Armv8.1-M Mainline overall does not. I have thus decided not to implement support for these registers in order to keep the code simpler. It can always be added later if needed.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (arm_typed_reg_parse): Fix typo in comment.
(enum reg_list_els): New REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR
enumerators.
(parse_vfp_reg_list): Add new partial_match parameter. Set
*partial_match to TRUE if at least one element in the register list has
matched. Add support for REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR
register lists which expect VPR as last element in the list.
(s_arm_unwind_save_vfp_armv6): Adapt call to parse_vfp_reg_list to new
prototype.
(s_arm_unwind_save_vfp): Likewise.
(enum operand_parse_code): New OP_VRSDVLST enumerator.
(parse_operands): Adapt call to parse_vfp_reg_list to new prototype.
Handle new OP_VRSDVLST case.
(do_t_vscclrm): New function.
(insns): New entry for VSCCLRM instruction.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add invalid VSCCLRM
instructions.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error expectations
for above instructions.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add tests for VSCCLRM
instruction.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add expected disassembly
for above instructions.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (coprocessor_opcodes): Document new %C format control code.
Add new entries for VSCCLRM instruction.
(print_insn_coprocessor): Handle new %C format control code.
Given the similarity between LDM/STM and CLRM register lists, most of the changes in this patch aim at sharing code between those two sets of instruction. Sharing is achieved both in parsing and encoding of those instructions.
In terms of parsing, parse_reg_list () is extended to take a type that describe what type of instruction is being parsed. The reg_list_els used for parse_vfp_reg_list () is reused for the type and that function is added an assert for the new REGLIST_CLRM and REGLIST_RN enumerators.
parse_reg_list () is then taught to accept APSR and reject SP and PC when parsing for a CLRM instruction. At last, caller of parse_reg_list () is updated accordingly and logic is added for the new OP_CLRMLST operand.
Encoding-wise, encode_thumb2_ldmstm () is reused to encode the variable bits of CLRM and is thus renamed encode_thumb2_multi (). A new do_io parameter is added to distinguish between LDM/STM and CLRM which guard all the LDM/STM specific code of the function.
Finally objdump is told how to disassemble CLRM, again reusing the logic to print the LDM/STM register list (format specifier 'm'). Tests are also added in the form of negative tests to check parsing and encoding/disassembling tests.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (enum reg_list_els): Define earlier and add
REGLIST_RN and REGLIST_CLRM enumerators.
(parse_reg_list): Add etype parameter to distinguish between regular
core register list and CLRM register list. Add logic to
recognize CLRM register list.
(parse_vfp_reg_list): Assert type is not for core register list.
(s_arm_unwind_save_core): Update call to parse_reg_list to new
prototype.
(enum operand_parse_code): Declare OP_CLRMLST enumerator.
(parse_operands): Update call to parse_reg_list to new prototype. Add
logic for OP_CLRMLST.
(encode_thumb2_ldmstm): Rename into ...
(encode_thumb2_multi): This. Add do_io parameter. Add logic to
encode CLRM and guard LDM/STM only code by do_io.
(do_t_ldmstm): Adapt to use encode_thumb2_multi.
(do_t_push_pop): Likewise.
(do_t_clrm): New function.
(insns): Define CLRM.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.d: New file.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Likewise.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (thumb_opcodes): Document %n control code. Add entry for
CLRM.
(print_insn_thumb32): Add logic to print %n CLRM register list.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds support to the Scalar low overhead loop instructions:
LE
WLS
DLS
We also add a new assembler resolvable relocation bfd_reloc_code_real enum for the 12-bit branch offset used in these instructions.
ChangeLog entries are as follows:
*** bfd/ChnageLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_LOOP12): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
*** gas/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR
for the LR operand and optional LR operand.
(parse_operands): Add switch cases for OP_LR and OP_oLR for
both type checking and value checking.
(encode_thumb32_addr_mode): New entries for DLS, WLS and LE.
(v8_1_loop_reloc): New helper function for handling labels
for the low overhead loop instructions.
(do_t_loloop): New function to encode DLS, WLS and LE.
(insns): New entries for WLS, DLS and LE.
(md_pcrel_from_section): New switch case
for BFD_RELOC_ARM_THUMB_LOOP12.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-tloop.s: New.
* testsuite/gas/arm/armv8_1-m-tloop.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.s: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.l: New.
*** opcodes/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %P
and %Q patterns.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum.
ChangeLog entries are as follows:
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entriy for bfcsel.
(do_t_v8_1_branch): New switch case for bfcsel.
(toU): Define.
(insns): New instruction for bfcsel.
(md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BFCSEL.
(md_appdy_fix): Likewise
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-bfcsel.d: New.
* testsuite/gas/arm/armv8_1-m-bfcsel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfcsel.s: New.
* testsuite/ld-arm/bfcsel.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfcsel.
(print_insn_thumb32): Edit the switch case for %Z.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This adds infrastructure for the BFCSEL instructions which is one of the first
instructions in Arm that have more than one relocations in them.
This adds a new relocation R_ARM_THM_BF12.
The inconsistency between external R_ARM_THM_BF12 and internal
BFD_RELOC_ARM_THUMB_BF13 is because internally we count the static bit-0 of the
immediate and we don't externally.
ChangeLog entries are as follows :
ChangeLog entries are as follows :
*** bfd/ChnageLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF13): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF13.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF13
and R_ARM_THM_BF12 together.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF13.
*** elfcpp/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF12): New relocation code.
*** gas/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF13.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF12.
*** opcodes/ChangeLog ***
2019-04-04 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %Z pattern.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This patch adds the BFL instruction.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entrie for bfl.
(do_t_v8_1_branch): New switch case for bfl.
(insns): New instruction for bfl.
* testsuite/gas/arm/armv8_1-m-bfl.d: New.
* testsuite/gas/arm/armv8_1-m-bfl.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfl.s: New.
* testsuite/ld-arm/bfl.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfl.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This adds infrastructure for the BFL instructions which is one of the first instructions in Arm that have more than one relocations in them.
This adds a new relocation R_ARM_THM_BF18.
The inconsistency between external R_ARM_THM_BF18 and internal
BFD_RELOC_ARM_THUMB_BF19 is because internally we count the static bit-0 of the immediate and we don't externally.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF19): New
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF18.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF19
and R_ARM_THM_BF18 together.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF19.
*** elfcpp/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF18): New relocation code.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF19.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF18.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %Y pattern.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFX and BFLX instructions.
ChangeLog entries are as follows :
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bfx and bflx.
(do_t_v8_1_branch): New switch cases for bfx and bflx.
(insns): New instruction for bfx and bflx.
* testsuite/gas/arm/armv8_1-m-bf-exchange.d: New.
* testsuite/gas/arm/armv8_1-m-bf-exchange.s: New.
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.s: New
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.l: New
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.d: New
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Add '%<bitfield>S' to print an
Arm register with r13 and r15 unpredictable.
(thumb32_opcodes): New instructions for bfx and bflx.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This patch adds the BF instruction.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bf.
(do_t_branch_future): New.
(insns): New instruction for bf.
* testsuite/gas/arm/armv8_1-m-bf.d: New.
* testsuite/gas/arm/armv8_1-m-bf.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bf.s: New.
* testsuite/ld-arm/bf.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instructions for bf.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This adds infrastructure for the BF instructions which is one of the first instructions in Arm that have more than one relocations in them.
This is the third infrastructure patch that adds a new relocation R_ARM_THM_BF16.
The inconsistency between external R_ARM_THM_BF16 and internal
BFD_RELOC_ARM_THUMB_BF17 is because internally we count the static bit-0 of the immediate and we don't externally.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_BF17): New enum.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
* bfd-elf32-arm.c (elf32_arm_howto_table_1): New entry for R_ARM_THM_BF16.
(elf32_arm_reloc_map elf32_arm_reloc_map): Map BFD_RELOC_ARM_THUMB_BF17
and R_ARM_THM_BF16 together.
(get_value_helper): New reloc helper.
(elf32_arm_final_link_relocate): New switch case for R_ARM_THM_BF16.
*** elfcpp/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm.h (R_ARM_THM_BF16): New relocation code.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF17.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
*** include/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* elf/arm.h (START_RELOC_NUMBERS): New entry for R_ARM_THM_BF16.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %W pattern.
This patch is part of a series of patches to add support for ARMv8.1-M Mainline
instructions to binutils.
This adds infrastructure for the Branch Future instructions (BF, BFX, BFL,
BFLX, BFCSEL).
These are the first instructions in ARM that have more than one relocations in
them. Their external relocations can be found in the 'ELF for the Arm
Architecture - ABI 2019Q1' document on developer.arm.com
This is the second infrastructure patch that adds support to allow up to
3 relocations in an instruction. This is done by changing the reloc member of
struct arm_it to an array instead (relocs[3]). All the previous occurrences of
reloc can now to referring to relocs[0].
ChangeLog entries are as follows :
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (ARM_IT_MAX_RELOCS): New macro.
(arm_it): Member reloc renamed relocs and updated to an array.
Rest: Replace all occurrences of reloc to relocs[0].
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This adds infrastructure for the Branch Future instructions (BF, BFX, BFL, BFLX,
BFCSEL). These are the first instructions in ARM that have more than one
relocations in them.
This is the first infrastructure patch that adds a new bfd_reloc_code_real enum
for the fallback branch offset.
This is common for all such instructions and needs to be resolvable by the
assembler.
ChangeLog entries are as follows :
*** bfd/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BRANCH5): New enum.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BRANCH5.
(v8_1_branch_value_check): New function to check branch
offsets.
(md_appdy_fix): New switch case for
BFD_RELOC_THUMB_PCREL_BRANCH5.
(tc_gen_reloc): Likewise.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %G pattern.
This patch implements the dsp, fp and fp.dp extensions for Armv8.1-M Mainline.
This patch also removes the fp-armv8 check from the half-precision move
instructions 'do_neon_movhf', as checking that the FP16 instructions extension
feature bit is enabled 'ARM_EXT2_FP16_INST' is enough.
gas/ChangeLog:
2019-04-15 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_movhf): Remove fp-armv8 check.
(armv8_1m_main_ext_table): New extension table.
(arm_archs): Use the new extension table.
* doc/c-arm.texi: Add missing arch and document new extensions.
* testsuite/gas/arm/armv8.1-m.main-fp.d: New.
* testsuite/gas/arm/armv8.1-m.main-fp-dp.d: New.
* testsuite/gas/arm/armv8.1-m.main-hp.d: New.
The patch is straightforward, it does the following:
- support the new Tag_CPU_arch build attribute value, ie.:
+ declare the new value
+ update all the asserts forcing logic to be reviewed for new
architectures
+ create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and
add mapping from Tag_CPU_arch to it
+ teach readelf about new Tag_CPU_arch value
- declare armv8.1-m.main as a supported architecture value
- define Armv8.1-M Mainline in terms of feature bits available
- tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature
bits available
- update architecture-specific logic in gas and bfd guarded by the
asserts mentioned above.
- tests for all the above
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* archures.c (bfd_mach_arm_8_1M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline.
* elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline
and update assert.
(using_thumb2): Likewise.
(using_thumb2_bl): Update assert.
(arch_has_arm_nop): Likewise.
(bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline.
(tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging.
*** binutils/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline
Tag_CPU_arch build attribute value. Reindent.
(get_aeabi_cpu_arch_from_fset): Update assert.
(aeabi_set_public_attributes): Update assert for Tag_DIV_use logic.
* testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test.
*** include/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro.
(MAX_TAG_CPU_ARCH): Set value to above macro.
* opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro.
(ARM_AEXT_V8_1M_MAIN): Likewise.
(ARM_AEXT2_V8_1M_MAIN): Likewise.
(ARM_ARCH_V8_1M_MAIN): Likewise.
*** ld/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/attr-merge-13.attr: New test.
* testsuite/ld-arm/attr-merge-13a.s: New test.
* testsuite/ld-arm/attr-merge-13b.s: New test.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add i6500. Update
default ASEs for i6400.
* doc/c-mips.texi (-march): Document i6500.
* testsuite/gas/mips/elf_mach_i6400.d: New test.
* testsuite/gas/mips/elf_mach_i6500.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
GAS does not enable implicit ASEs for most MIPS processors.
The rework of option handling done as part of .module implementation
left the implicit ASE logic broken and default enabled ASEs for
most processors did not get applied. This patch ensures the ASE
information is carried forward to the point where it is required.
gas/
* config/tc-mips.c (mips_set_options) <init_ase>: New field.
(file_mips_opts, mips_opts) <init_ase>: Initialize new field.
(file_mips_check_options): Propagate initial ASE settings.
(mips_after_parse_args, parse_code_option): Track the initial
ASE settings for a CPU.
(s_mipsset): Restore the initial ASE settings when reverting
to the default arch.
* testsuite/gas/mips/elf_mach_p6600.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/gas/xtensa/loop-relax-2.d: New test definition.
* testsuite/gas/xtensa/loop-relax.d: New test definition.
* testsuite/gas/xtensa/loop-relax.s: New test source.
* testsuite/gas/xtensa/text-section-literals-1a.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-2.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-2.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-2a.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-3.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-3.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-4.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-4.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-4a.d: New test
definition.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/gas/xtensa/all.exp: Remove all expect-based
tests and all explicit run_dump_test / run_list_test
invocations. Add run_dump_tests for all .d files in the
test subdirectory.
* testsuite/gas/xtensa/entry_align.d: New test definition.
* testsuite/gas/xtensa/entry_align.l: New test output.
* testsuite/gas/xtensa/entry_misalign.d: New test definition.
* testsuite/gas/xtensa/entry_misalign2.d: New test definition.
* testsuite/gas/xtensa/j_too_far.d: New test definition.
* testsuite/gas/xtensa/j_too_far.l: New test output.
* testsuite/gas/xtensa/loop_align.d: New test definition.
* testsuite/gas/xtensa/loop_misalign.d: New test definition.
* testsuite/gas/xtensa/trampoline-2.d: New test definition.
* testsuite/gas/xtensa/trampoline-2.l: Remove empty output.
* testsuite/gas/xtensa/xtensa-err.exp: Use positive logic.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_literal_pseudo): Drop code that has
no effect.
(get_literal_pool_location): Only search for the literal pool
when auto litpools is used, otherwise take one recorded in the
tc_segment_info_data.
(xtensa_assign_litpool_addresses): New function.
(xtensa_move_literals): Don't duplicate 'literal pool location
required...' error message. Call xtensa_assign_litpool_addresses.
Provide literal position at the beginning of each section for literal
space reserved by relaxations when text-section-literals or
auto-litpools options are used. Remove code that adds fill frag to the
literal section for every .literal_position directive to avoid creation
of empty literal sections.
Fix auto-litpools tests that got literal pool address changes.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_is_init_fini): Add declaration.
(xtensa_mark_literal_pool_location): Don't add fill frag to literal
section that records literal pool location.
(md_begin): Call xtensa_mark_literal_pool_location when text
section literals or auto litpools are used.
(xtensa_elf_section_change_hook): Call
xtensa_mark_literal_pool_location when text section literals or
auto litpools are used, there's no literal pool location defined
for the current section and it's not .init or .fini.
* testsuite/gas/xtensa/auto-litpools-first1.d: Fix up addresses.
* testsuite/gas/xtensa/auto-litpools-first2.d: Likewise.
* testsuite/gas/xtensa/auto-litpools.d: Likewise.
This patch updates the Store allocation tags instructions in
Armv8.5-A Memory Tagging Extension. This is part of the changes
that have been introduced recently in the 00bet10 release
All of these instructions have an updated register operand (Xt -> <Xt|SP>)
- STG <Xt|SP>, [<Xn|SP>, #<simm>]
- STG <Xt|SP>, [<Xn|SP>, #<simm>]!
- STG <Xt|SP>, [<Xn|SP>], #<simm>
- STZG <Xt|SP>, [<Xn|SP>, #<simm>]
- STZG <Xt|SP>, [<Xn|SP>, #<simm>]!
- STZG <Xt|SP>, [<Xn|SP>], #<simm>
- ST2G <Xt|SP>, [<Xn|SP>, #<simm>]
- ST2G <Xt|SP>, [<Xn|SP>, #<simm>]!
- ST2G <Xt|SP>, [<Xn|SP>], #<simm>
- STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]
- STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]!
- STZ2G <Xt|SP>, [<Xn|SP>], #<simm>
In order to accept <Rt|SP> a new operand type Rt_SP is introduced which has
the same field as FLD_Rt but follows other semantics of Rn_SP.
*** gas/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (process_omitted_operand): Add case for
AARCH64_OPND_Rt_SP.
(parse_operands): Likewise.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Update tests.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** include/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rt_SP.
*** opcodes/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_print_operand): Add case for
AARCH64_OPND_Rt_SP.
(verify_constraints): Likewise.
* aarch64-tbl.h (QL_LDST_AT): Update to add SP qualifier.
(struct aarch64_opcode): Update stg, stzg, st2g, stz2g instructions
to accept Rt|SP as first operand.
(AARCH64_OPERANDS): Add new Rt_SP.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds the new LDGM/STGM instructions of the
Armv8.5-A Memory Tagging Extension. This is part of the changes
that have been introduced recently in the 00bet10 release
The instructions are as follows:
LDGM Xt, [<Xn|SP>]
STGM Xt, [<Xn|SP>]
*** gas/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for ldgm and stgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new ldgm and stgm.
The fix H.J. implemented for PR gas/22791 in the thread starting at
[PATCH] x86-64: Treat PC32 relocation with branch as PLT32
https://sourceware.org/ml/binutils/2018-02/msg00065.html
is causing problems on Solaris/x86. The native linker is strongly
preferred there, and there's no intention of implementing the linker
optimization he plans there. Besides, the kernel runtime linker,
otherwise has no need to deal with that reloc at all, and instead of
adding (possibly even more) workarounds with no benefit, it seems
appropriate to disable the R_X86_64_PLT32 generation as branch marker on
Solaris/x86 in the first place.
The patch itself is trivial, the only complication is adapting the
testsuite. Since I've found no way to have conditional sections in the
.d files, I've instead used the solution already found elsewhere of
having separate .d files for the affected tests in an i386/solaris
subdirectory and skipping the original ones.
Tested on amd64-pc-solaris2.11 and x86_64-pc-linux-gnu without
regressions.
* config/tc-i386.c (need_plt32_p) [TE_SOLARIS]: Return FALSE.
* testsuite/gas/i386/solaris/solaris.exp: New driver.
* testsuite/gas/i386/solaris/reloc64.d,
testsuite/gas/i386/solaris/x86-64-jump.d,
testsuite/gas/i386/solaris/x86-64-mpx-branch-1.d,
testsuite/gas/i386/solaris/x86-64-mpx-branch-2.d,
testsuite/gas/i386/solaris/x86-64-nop-3.d,
testsuite/gas/i386/solaris/x86-64-nop-4.d,
testsuite/gas/i386/solaris/x86-64-nop-5.d,
testsuite/gas/i386/solaris/x86-64-relax-2.d,
testsuite/gas/i386/solaris/x86-64-relax-3.d: New tests.
* testsuite/gas/i386/reloc64.d,
testsuite/gas/i386/x86-64-jump.d,
testsuite/gas/i386/x86-64-mpx-branch-1.d,
testsuite/gas/i386/x86-64-mpx-branch-2.d,
testsuite/gas/i386/x86-64-nop-3.d,
testsuite/gas/i386/x86-64-nop-4.d,
testsuite/gas/i386/x86-64-nop-5.d,
testsuite/gas/i386/x86-64-relax-2.d,
testsuite/gas/i386/x86-64-relax-3.d: Skip on *-*-solaris*.
This patch is aimed a fixing large numbers of x86_64-cloudabi failures
caused by gas selecting the wrong target name.
* config/te-cloudabi.h: New file.
* config/tc-aarch64.c (aarch64_after_parse_args): Use TE_CLOUDABI
rather than TARGET_OS to select cloudabi.
* config/tc-i386.h (ELF_TARGET_FORMAT64): Define for TE_CLOUDABI.
* configure.tgt (*-*-cloudabi*): Set em=cloudabi.
In Release 6 of the MIPS architecture [1], instruction RDHWR supports
a 3rd operand to serve as the 3-bit select field for the hardware
register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 332-334
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add RDHWR rt rd sel.
gas/
* testsuite/gas/mips/mips.exp: Run hwr-names test.
* testsuite/gas/mips/hwr-names.s: Add test cases for RDHWR with
the SEL field.
* testsuite/gas/mips/mipsr6@hwr-names.d: New file.
Adds a new test checking conditional branch BO values.
* testsuite/gas/ppc/bc.s,
* testsuite/gas/ppc/bcat.d,
* testsuite/gas/ppc/bcaterr.d,
* testsuite/gas/ppc/bcaterr.l,
* testsuite/gas/ppc/bcy.d,
* testsuite/gas/ppc/bcyerr.d,
* testsuite/gas/ppc/bcyerr.l: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
When an instruction has operands, the PowerPC disassembler prints
spaces after the opcode so as to line up operands. If the operands
are all optional and all default value, then no operands are printed,
leaving trailing spaces. This patch fixes that.
opcodes/
* ppc-dis.c (print_insn_powerpc): Delay printing spaces after
opcode until first operand is output.
gas/
* testsuite/gas/ppc/476.d: Remove trailing spaces.
* testsuite/gas/ppc/a2.d: Likewise.
* testsuite/gas/ppc/booke.d: Likewise.
* testsuite/gas/ppc/booke_xcoff.d: Likewise.
* testsuite/gas/ppc/e500.d: Likewise.
* testsuite/gas/ppc/e500mc.d: Likewise.
* testsuite/gas/ppc/e6500.d: Likewise.
* testsuite/gas/ppc/htm.d: Likewise.
* testsuite/gas/ppc/power6.d: Likewise.
* testsuite/gas/ppc/power8.d: Likewise.
* testsuite/gas/ppc/power9.d: Likewise.
* testsuite/gas/ppc/vle.d: Likewise.
ld/
* testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
* testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
Loop opcode relaxation that uses addi/addmi doesn't work well with other
relaxations that may cause code movement. Instead of encoding fixed loop
end offset in the relaxed sequence use l32r or a pair of const16 to load
loop end address. This way the address of the loop end gets a relocation
record and it gets updated appropriately.
gas/
2019-04-03 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (convert_frag_immed): Drop
convert_frag_immed_finish_loop invocation.
(convert_frag_immed_finish_loop): Drop declaration and
definition.
* config/xtensa-relax.c (widen_spec_list): Replace loop
widening that uses addi/addmi with widening that uses l32r
and const16.
This patch adds a new framework to add architecture sensitive extensions, like
GCC does. This patch also implements all architecture extensions currently
available in GCC.
This framework works as follows. To enable architecture sensitive extensions
for a particular architecture, that architecture must contain an ARM_ARCH_OPT2
entry in the 'arm_archs' table. All fields here are the same as previous, with
the addition of a new extra field at the end to <name> it's extension table.
This <name>, corresponds to a <name>_ext_table of type 'struct arm_ext_table'.
This struct can be filled with three types of entries:
ARM_ADD (string <ext>, arm_feature_set <enable_bits>), which means +<ext> will
enable <enable_bits>
ARM_REMOVE (string <ext>, arm_feature_set <disable_bits>), which means
+no<ext> will disable <disable_bits>
ARM_EXT (string <ext>, arm_feature_set <enable_bits>, arm_feature_set
<disable_bits>), which means +<ext> will enable <enable_bits> and +no<ext>
will disable <disable_bits> (this is to be used instead of adding an
ARM_ADD and ARM_REMOVE for the same <ext>)
This patch does not disable the use of the old extensions, even if some of them
are duplicated in the new tables. This is a "in-between-step" as we may want to
deprecate the old table of extensions in later patches. For now, GAS will first
look for the +<ext> or +no<ext> in the new table and if no entry is found it
will continue searching in the old table, following old behaviour. If only an
ARM_ADD or an ARM_REMOVE is defined for <ext> and +no<ext> or +<ext> resp. is
used then it also continues to search the old table for it.
A couple of caveats:
- This patch does not enable the use of these architecture extensions with the
'.arch_extension' directive. This is future work that I will tend to later.
- This patch does not enable the use of these architecture extensions with the
-mcpu option. This is future work that I will tend to later.
- This patch does not change the current behaviour when combining an
architecture extension and using -mfpu on the command-line. The current
behaviour of GAS is to stage the union of feature bits enabled by both -march
and -mfpu. GCC behaves differently here, so this is something we may want to
revisit on a later date.
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately
glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit.
So for backwards compatibility accept cr field expressions when
assembling mtfsb operands, but disassemble to a plain number.
PR 24390
include/
* opcode/ppc.h (PPC_OPERAND_CR_REG): Comment.
opcodes/
* ppc-opc.c (BTF): Define.
(powerpc_opcodes): Use for mtfsb*.
* ppc-dis.c (print_insn_powerpc): Print fields with both
PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number.
gas/
* testsuite/gas/ppc/476.d: Update mtfsb*.
* testsuite/gas/ppc/a2.d: Likewise.
This field is unused. I would have liked to also remove
leading_underscore and fake_label_name but in an i386-elf/coff/aout
multi-obj setup those fields are used to select a different
fake_label_name for aout.
* emul.h (struct emulation): Delete strip_underscore.
* emul-target.h (emul_strip_underscore): Don't define.
(emul_struct_name): Update initialization.
and tidy "forward" test. I've removed some checks in d30v
md_apply_fix that have no business being there. Any symbol problems
will be caught later in tc_gen_reloc, and overflow checking is done in
gas/write.c.
* config/tc-d10v.c (md_apply_fix): Apply BFD_RELOC_8.
* config/tc-pdp11.c (md_apply_fix): Likewise.
* config/tc-d30v.c (md_apply_fix): Don't emit errors for BFD_RELOC_8,
BFD_RELOC_16, and BFD_RELOC_64.
* testsuite/gas/all/gas.exp: Move target exclusions for forward
test, but not cr16, to..
* testsuite/gas/all/forward.d: ..here, with explanation. Remove
d10v, d30v, and pdp11 xfails.
Update EVEX vector load/store optimization:
1. There is no need to check AVX since AVX2 is required for AVX512F.
2. We need to check both operands for ZMM register since AT&T syntax
may not set zmmword on the first operand.
3. Update Opcode_SIMD_IntD check and set.
4. Since the VEX prefix has 2 or 3 bytes, the EVEX prefix has 4 bytes,
EVEX Disp8 has 1 byte and VEX Disp32 has 4 bytes, we choose EVEX Disp8
over VEX Disp32.
* config/tc-i386.c (optimize_encoding): Don't check AVX for
EVEX vector load/store optimization. Check both operands for
ZMM register. Update EVEX vector load/store opcode check.
Choose EVEX Disp8 over VEX Disp32.
* testsuite/gas/i386/optimize-1.d: Updated.
* testsuite/gas/i386/optimize-1a.d: Likewise.
* testsuite/gas/i386/optimize-2.d: Likewise.
* testsuite/gas/i386/optimize-4.d: Likewise.
* testsuite/gas/i386/optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2b.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-3.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.d: Likewise.
* testsuite/gas/i386/optimize-1.s: Add ZMM register load
test.
* testsuite/gas/i386/x86-64-optimize-2.s: Likewise.
Since not all AVX512F processors support AVX512VL, we can optimize
512-bit EVEX to 128-bit EVEX encoding for upper 16 vector registers
only when AVX512VL is enabled explicitly at command-line or via
".arch .avx512vl" directive.
PR gas/24352
* config/tc-i386.c (optimize_encoding): Check only
cpu_arch_flags.bitfield.cpuavx512vl.
* testsuite/gas/i386/i386.exp: Run x86-64-optimize-2b.
* testsuite/gas/i386/x86-64-optimize-2.d: Revert the last
change.
* testsuite/gas/i386/x86-64-optimize-2b.d: New file.
* testsuite/gas/i386/x86-64-optimize-2b.s: Likewise.
These fails were introduced by git commit 2469b3c584 with the
inroduction of "input_from_string":
m68k-linux FAIL: MRI structured for
m68k-linux FAIL: MRI structured if
m68k-linux FAIL: MRI structured repeat
m68k-linux FAIL: MRI structured while
Since the m68k parser called expression() without setting
input_from_string, get_symbol_name rejected FAKE_LABEL_CHAR in names.
* config/m68k-parse.y (yylex): Use temp_ilp and restore_ilp.
Since all AVX512 processors support AVX, we can encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX vector
register clearing instructions at -O1.
* config/tc-i386.c (optimize_encoding): Encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX
vector register clearing instructions at -O1.
* doc/c-i386.texi: Update -O1 and -O2 documentation.
* testsuite/gas/i386/i386.exp: Run optimize-1a and
x86-64-optimize-2a.
* testsuite/gas/i386/optimize-1a.d: New file.
* testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
Set optimize to INT_MAX, instead of -1, for -Os so that -Os will include
-O2 optimization.
PR gas/24353
* config/tc-i386.c (md_parse_option): Set optimize to INT_MAX
for -Os.
* testsuite/gas/i386/optimize-2.s: Add a test.
* testsuite/gas/i386/x86-64-optimize-3.s: Likewise.
* testsuite/gas/i386/optimize-2.d: Updated.
* testsuite/gas/i386/x86-64-optimize-3.d: Likewise.
We can optimize 512-bit EVEX to 128-bit EVEX encoding for upper 16
vector registers only when AVX512VL is enabled. We can't optimize
EVEX to 128-bit VEX encoding when AVX isn't enabled.
PR gas/24352
* config/tc-i386.c (optimize_encoding): Encode 512-bit EVEX
with 128-bit VEX encoding only when AVX is enabled and with
128-bit EVEX encoding only when AVX512VL is enabled.
* testsuite/gas/i386/i386.exp: Run PR gas/24352 tests.
* testsuite/gas/i386/optimize-6.s: New file.
* testsuite/gas/i386/optimize-6a.d: Likewise.
* testsuite/gas/i386/optimize-6b.d: Likewise.
* testsuite/gas/i386/optimize-6c.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-7a.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7b.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7c.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.d: Updated.
All relocations specify a byte address. As dwarf debug information is
organized in octets, some relocations may not be aligned. While it
might be possible to define special relocations that operate at an
octet offset from their address, it's easier to ensure the relocations
are aligned by padding with "nop" statements.
In most dwarf sections this requirement is already fulfilled, only
relocations for symbol address within the .debug_line section can be
misaligned.
* dwarf2dbg.c (out_set_addr): Align relocation within .debug_line.
As all dwarf debug information is organized in octets, the size of all
dwarf sections must be aligned to OCTETS_PER_BYTE. Most DWARF sections
meet this requirement, only the .debug_line section can reach an
arbitrary octet size.
In order to align the size to a multiple of OCTETS_PER_BYTE, the section
is padded with "nop" statements at the end.
* dwarf2dbg.c (out_debug_line): Pad size of .debug_line section.
Like other dwarf2 offsets, also the string offsets in the .debug_info
section which points into the .debug_str section must be expressed in
octets instead of bytes.
* dwarf2dbg.c (out_debug_str): Use octets for .debug_string pointers.
Like the u32 size field at the beginning of the section, also the
prologue size must be expressed in octets.
* dwarf2dbg.c (out_debug_line): Use octets for .debug_line prologue.
The content of the dwarf2 sections .debug_line, .debug_aranges and
.debug_info starts with an u32 containing the the size of the remaining
data. According to the dwarf2 specification this value must be expressed
in octets instead of bytes.
* dwarf2dbg.c (out_debug_line): Use octets for dwarf2 headers.
(out_debug_aranges, out_debug_info): Likewise.
Up to now, all symbol values are in units of bytes, where a "byte" can
consist of one or more octets (e.g. 8 bit or 16 bit).
Allow to specfiy that the "unit" of a newly created symbol is octets
(exactly 8 bit), instead of bytes.
* symbols.h (symbol_temp_new_now_octets): Declare.
(symbol_set_value_now_octets, symbol_octets_p): Declare.
* symbols.c (struct symbol_flags): New member sy_octets.
(symbol_temp_new_now_octets): New function.
(resolve_symbol_value): Return octets instead of bytes if
sy_octets is set.
(symbol_set_value_now_octets): New function.
(symbol_octets_p): New function.
The units of the value returned by "frag_now_fix()" and "size" do not
match. "frag_now_fix()" returns bytes (can be 8, 16 or 32 bit), while
"size" is octets (exactly 8 bit).
* dwarf2dbg.c (dwarf2_emit_insn): Fix calculation of line info offset.
Committed on behalf of Matthew Malcomson.
This allows checking the command line parsing more easily than before by
allowing many command line invokations from the same .d file.
Each line is used as a set of flags, and the tests are ran against the output
of the assembler with each set.
Each line of assembler is treated as another set of tests (as if the test file
were copied to another with a different #as: line).
This patch includes some example uses where multiple testcases can be merged
into one file using this new functionality.
binutils/ChangeLog:
* testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
gas/ChangeLog:
* testsuite/gas/aarch64/dotproduct.d: Use multiple "as" lines.
* testsuite/gas/aarch64/dotproduct_armv8_4.d: Remove.
* testsuite/gas/aarch64/dotproduct_armv8_4.s: Remove.
* testsuite/gas/aarch64/illegal-dotproduct.d: Use multiple "as"
lines.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: Remove.
* testsuite/gas/aarch64/ldst-rcpc.d: Use multiple "as" lines.
Fixes non-ELF powerpc build failure:
tc-ppc.c:3009:1: error: ‘parse_tls_arg’ defined but not used
* config/tc-ppc.c (parse_tls_arg): Wrap in #ifdef OBJ_ELF.
The syntax we ended up with for -m32 -fPIC calls to __tls_get_addr is
rather weird.
bl __tls_get_addr+0x8000(gd0@tlsgd)@plt
This came about by accident, probably due to requiring the arg reloc
before the call reloc.
Of course the @plt really belongs with __tls_get_addr since it affects
the call rather than the call arg, and it isn't a great deal of
trouble to ensure the relocs are emitted in the correct order. This
patch supports a newer syntax, like so:
bl __tls_get_addr+0x8000@plt(gd0@tlsgd)
gas/
* config/tc-ppc.c (parse_tls_arg): New function, extracted..
(md_assembler): ..from here. Call it after parsing other
suffix modifiers too.
ld/
* testsuite/ld-powerpc/tls32.s: Test new @plt syntax.
ommit 3ae729d5a4
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed Mar 7 04:18:45 2018 -0800
x86: Rewrite NOP generation for fill and alignment
increased MAX_MEM_FOR_RS_ALIGN_CODE to 4095 which resulted in increase
of assembler time and memory usage by 5 times for inputs with many
.p2align directives, which is typical for LTO output. This patch passes
max_bytes to TC_FRAG_INIT so that MAX_MEM_FOR_RS_ALIGN_CODE can be set
as needed and tracked by backend it so that HANDLE_ALIGN can check the
maximum alignment for each rs_align_code frag. Wall time to assemble
the same cc1plus.s:
before:
423.78user 0.89system 7:05.71elapsed 99%CPU
after:
102.35user 0.27system 1:42.89elapsed 99%CPU
PR gas/24165
* frags.c (frag_var_init): Pass max_chars to TC_FRAG_INIT as
max_bytes.
* config/tc-aarch64.h (TC_FRAG_INIT): Add and pass max_bytes to
aarch64_init_frag.
* /config/tc-arm.h (TC_FRAG_INIT): And and pass max_bytes to
arm_init_frag.
* config/tc-avr.h (TC_FRAG_INIT): And and ignore max_bytes.
* config/tc-ia64.h (TC_FRAG_INIT): Likewise.
* config/tc-mmix.h (TC_FRAG_INIT): Likewise.
* config/tc-nds32.h (TC_FRAG_INIT): Likewise.
* config/tc-ns32k.h (TC_FRAG_INIT): Likewise.
* config/tc-rl78.h (TC_FRAG_INIT): Likewise.
* config/tc-rx.h (TC_FRAG_INIT): Likewise.
* config/tc-score.h (TC_FRAG_INIT): Likewise.
* config/tc-tic54x.h (TC_FRAG_INIT): Likewise.
* config/tc-tic6x.h (TC_FRAG_INIT): Likewise.
* config/tc-xtensa.h (TC_FRAG_INIT): Likewise.
* config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Set to
(alignment ? ((1 << alignment) - 1) : 1)
(i386_tc_frag_data): Add max_bytes.
(TC_FRAG_INIT): Add and track max_bytes.
(HANDLE_ALIGN): Replace MAX_MEM_FOR_RS_ALIGN_CODE with
fragP->tc_frag_data.max_bytes.
* doc/internals.texi: Update TC_FRAG_TYPE with max_bytes.
This lets us accept an instruction like
beq a2,x0,.Label
and generate a compressed beqz. This will allow some future simplications
to the gcc support, e.g. eliminating some duplicate patterns, and avoiding
adding new duplicate patterns, since currently we have to handle signed
and equality compares against zero specially.
Tested with rv{32,64}-{elf,linux} cross builds and make checks for binutils
and gcc. There were no regressions.
gas/
* config/tc-riscv.c (validate_riscv_insn) <'C'>: Add 'z' support.
(riscv_ip) <'C'>: Add 'z' support.
opcodes/
* riscv-opc.c (riscv_opcodes) <beq>: Use Cz to compress 3 operand form.
<bne>: Likewise.
The software trap instruction HLT that was introduced in Armv8-a is used
as the semihosting trap instruction in AArch64. In order to allow systems
configured to run AArch64 code to also run AArch32 with semihosting it was
decided that AArch32 should also use HLT in the case of the "mixed mode"
environment. This requires that HLT also be backported to all earlier
architectures. The instruction is in the undefined encoding space earlier
architectures but must trigger a semihosting trap [3].
The Arm Architectural Reference Manual [1] doesn't explicitly mention this
however this is an explicit requirement in the Semihosting-v2 protocol [2].
[1] https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile
[2] https://developer.arm.com/docs/100863/latest/the-semihosting-interface
[3] 19a6e31c9d
gas/ChangeLog:
* config/tc-arm.c (insns): Redefine THUMB_VARIANT and ARM_VARIANT for
hlt to armv1.
* testsuite/gas/arm/armv8a-automatic-hlt.d: Update TAGs
* testsuite/gas/arm/hlt.d: New test.
* testsuite/gas/arm/hlt.s: New test.
opcodes/ChangeLog:
* arm-dis.c (arm_opcodes): Redefine hlt to armv1.
This patch just adds a few negative tests for the Armv8.3-a complex instructions.
These already do the right disassembly without needing a verifier, but adding
some tests to make sure that stays that way.
gas/ChangeLog:
* testsuite/gas/aarch64/undefined_advsimd_armv8_3.d: New test.
* testsuite/gas/aarch64/undefined_advsimd_armv8_3.s: New test.
The AArch64 instruction set has cut-outs inside instructions encodings for
when a given encoding that would normally fall within the encoding space of
an instruction is instead undefined.
This updates the first few instructions FMLA, FMLA, FMUL and FMULX in the case
where sz:L == 11.
gas/ChangeLog:
PR binutils/23212
* testsuite/gas/aarch64/undefined_by_elem_sz_l.s: New test.
* testsuite/gas/aarch64/undefined_by_elem_sz_l.d: New test.
opcodes/ChangeLog:
PR binutils/23212
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz.
* aarch64-opc.c (verify_elem_sd): New.
(fields): Add FLD_sz entr.
* aarch64-tbl.h (_SIMD_INSN): New.
(aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and
fmulx scalar and vector by element isns.
This is done in order to avoid a pipeline hazard on the GR6.
gas/
* config/tc-visium.c (md_assemble) <mode_cad>: Align instruction
on 64-bit boundaries for the GR6.
* testsuite/gas/visium/allinsn_gr6.s: Tweak.
* testsuite/gas/visium/allinsn_gr6.d: Likewise.
* testsuite/gas/visium/bra-1.d: New test.
* testsuite/gas/visium/bra-1.s: Likewise.
* testsuite/gas/visium/visium.exp: Run bra-1 test.
mov.l, mov.p and mov.w (but not mov.b) when called with an immediate source
operand should be accepted a relocatable expression. This change makes that
possible.
gas/
* config/tc-s12z.c (lex_imm): Add new argument exp_o.
(emit_reloc): New function.
(md_apply_fix): [BFD_RELOC_S12Z_OPR] Recognise that it
can be either 2 bytes or 3 bytes long.
* testsuite/gas/s12z/mov-imm-reloc.d: New file.
* testsuite/gas/s12z/mov-imm-reloc.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
The limits for PC relative offsets were incorrect. This change fixes
them and adds some tests.
gas/
* config/tc-s12z.c (md_apply_fix): Fix incorrect limits.
* testsuite/gas/s12z/pc-rel-bad.d: New file.
* testsuite/gas/s12z/pc-rel-bad.l: New file.
* testsuite/gas/s12z/pc-rel-bad.s: New file.
* testsuite/gas/s12z/pc-rel-good.d: New file.
* testsuite/gas/s12z/pc-rel-good.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
It is permissible for the source and destination operands of TFR and EXG to be
the same register. However it is a pointless instruction and anyone writing it
has probably made a mistake. This change emits a warning if such an instruction
is encountered.
gas/
* config/tc-s12z.c (tfr): Emit warning if operands are the same.
* testsuite/gas/s12z/exg.d: New test case.
* testsuite/gas/s12z/exg.l: New file.
The assembler permitted instructions which attempted to assign to an immediate
operand. Bizarrely there is a valid machine code for such operations (although
the documentation says it's "inappropriate"). This change causes such attempts
to fail with an error message.
gas/
* config/tc-s12z.c (lex_opr): Add a parameter to indicate whether
immediate mode operands should be permitted.
* testsuite/s12z/imm-dest.d: New file.
* testsuite/s12z/imm-dest.l: New file.
* testsuite/s12z/imm-dest.s: New file.
* testsuite/s12z/s12z.exp: Add them.
opcodes/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Accept arch13 as cpu string.
* s390-opc.c: Add new instruction formats and instruction opcode
masks.
* s390-opc.txt: Add new arch13 instructions.
include/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH13.
gas/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch13.
* doc/c-s390.texi: Document arch13 march option.
* testsuite/gas/s390/s390.exp: Run the arch13 related tests.
* testsuite/gas/s390/zarch-arch13.d: New test.
* testsuite/gas/s390/zarch-arch13.s: New test.
* testsuite/gas/s390/zarch-z13.d: Expect the renamed mnemonics
also for z13.
gcc-9 flagged warnings at the places I'm patching here, all real bugs.
* config/tc-alpha.c (md_apply_fix): Correct range checks for
BFD_RELOC_ALPHA_NOP, BFD_RELOC_ALPHA_LDA, BFD_RELOC_ALPHA_BSR.
* config/tc-arm.c (md_apply_fix): Use llabs rather than abs.
* config/tc-csky.c (get_macro_reg_vals): Pass s to csky_show_error.
xtensa gas chokes on 8/16 bit data entries representing constant symbols
because it leaves BFD_RELOC_8/BFD_RELOC_16 fixups for which xtensa BFD
cannot emit relocations. Resolve fixups for constant symbols in
md_apply_fix.
gas/
2019-01-28 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (md_apply_fix): Mark fixups for constant
symbols as done in md_apply_fix.
* testsuite/gas/all/forward.d: Don't XFAIL for xtensa.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch updates the st*g instructions
to use a previously reserved field for a new register operand. Thus the
new versions of the instructions are as follows:
- STG Xt, [<Xn|SP>, #<simm>]
- STG Xt, [<Xn|SP>, #<simm>]!
- STG Xt, [<Xn|SP>], #<simm>
- STZG Xt, [<Xn|SP>, #<simm>]
- STZG Xt, [<Xn|SP>, #<simm>]!
- STZG Xt, [<Xn|SP>], #<simm>
- ST2G Xt, [<Xn|SP>, #<simm>]
- ST2G Xt, [<Xn|SP>, #<simm>]!
- ST2G Xt, [<Xn|SP>], #<simm>
- STZ2G Xt, [<Xn|SP>, #<simm>]
- STZ2G Xt, [<Xn|SP>, #<simm>]!
- STZ2G Xt, [<Xn|SP>], #<simm>
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (warn_unpredictable_ldst): Exempt
stg, st2g, stzg and stz2g from Xt == Xn with writeback warning.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Change tests for
stg, stzg, st2g and stz2g.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
* aarch64-tbl.h (QL_LDST_AT): Update macro.
(aarch64_opcode): Change encoding for stg, stzg
st2g and st2zg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch adds the new STZGM instruction.
STGZM Xt, [<Xn|SP>]
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for stzgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new stzgm.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV
instructions. These instructions needed special infrastructure to support
[base]! style for addressing mode. That is also removed now.
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (parse_address_main): Remove support for
[base]! address expression.
(parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2.
(warn_unpredictable_ldst): Remove support for ldstgv_indexed.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv
and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** include/ChangeLog ***
* opcode/aarch64.h (enum aarch64_opnd): Remove
AARCH64_OPND_ADDR_SIMPLE_2.
(enum aarch64_insn_class): Remove ldstgv_indexed.
*** opcodes/ChangeLog ***
* aarch64-asm.c (aarch64_ins_addr_simple_2): Remove.
* aarch64-asm.h (ins_addr_simple_2): Likeiwse.
* aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise.
* aarch64-dis.h (ext_addr_simple_2): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Remove
case for ldstgv_indexed.
(aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv.
(AARCH64_OPERANDS): Remove ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
An assertion that can be triggered by user input is wrong, so remove
it. I believe the NUL would have been accepted before the PR20902
patch.
PR 20902
PR 24125
* read.c (stringer): Delete assertion.
The PE targets don't support mapping symbols and so the disassembler is unable
to correctly output thumb instructions when the input was thumb.
So for testcases that only have thumb output, I have copied them and skipped the
ones for which auto-detection is supposed to work on PE, and added a new one
that will force thumb output. This so that the tests still check the mapping
symbols.
For the tests that switch between thumb and arm in one file I just skip them
entirely on PE targets.
This cleans up the PE GAS testsuite.
gas/
* testsuite/gas/arm/archv6t2-1-pe.d: New test.
* testsuite/gas/arm/archv6t2-1.d: Skip pe.
* testsuite/gas/arm/csdb.d: Skip pe.
* testsuite/gas/arm/sb-thumb1-pe.d: New test.
* testsuite/gas/arm/sb-thumb1.d: Skip pe.
* testsuite/gas/arm/sb-thumb2-pe.d: New test.
* testsuite/gas/arm/sb-thumb2.d: Skip pe.
* testsuite/gas/arm/udf.d: Skip pe.
2019-01-16 Kito Cheng <kito@andestech.com>
bfd/
* elf-attrs.c (vendor_obj_attr_size): Return 0 if size is 0 even
for OBJ_ATTR_PROC.
gas/
* testsuite/gas/riscv/attribute-empty.d: New.
The assembler incorrectly recognised "c" as a register name, and
refused to allow it where it expected a symbol/label.
gas/
* config/tc-s12z.c (lex_reg_name): Compare the length of the strings
before the contents.
* testsuite/gas/s12z/labels.d: New file.
* testsuite/gas/s12z/labels.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
Other assemblers permit "extending" a register into a register of a
smaller size or the same size. It doesn't make much sense to do this
but would appear to be a valid instruction. So change the error to a
warning.
gas/
* config/tc-s12z.c (tfr): Change as_bad to as_warn.
Also fix message typo and semantics.
gas/
* testsuite/gas/s12z/jsr.s: New case.
* testsuite/gas/s12z/jsr.d: New case.
opcodes/
* s12z-dis.c (opr_emit_disassembly): Do not omit an index if it is
zero.
This adds support for the Arm Ares CPU for AArch64.
It implements the Armv8.2-A architecture with the optional features
of statistical profiling, dot product and FP16 on by default.
Note: Ares is a codename to enable early adopters and in time
we will add the final product name once it's announced.
* config/tc-aarch64.c (aarch64_cpus): Add ares.
* doc/c-aarch64.texi (-mcpu): Document ares value.
This adds support for the Arm Ares CPU in the arm port.
It implements the Armv8.2-A architecture with the relevant optional
features
of dot product and FP16 on by default.
Note: Ares is a codename to enable early adopters and in time
we will add the final product name once it's announced.
* config/tc-arm.c (arm_cpus): Add ares.
* doc/c-arm.texi (-mcpu): Document ares value.
For PLT expressions, we should subtract the PLT relocation size only for
jump instructions. Since PLT relocations are PC relative, we only allow
"symbol@PLT" in PLT expression.
gas/
PR gas/23997
* config/tc-i386.c (x86_cons): Check for invalid PLT expression.
(md_apply_fix): Subtract the PLT relocation size only for jump
instructions.
* testsuite/gas/i386/reloc32.s: Add test for invalid PLT
expression.
* testsuite/gas/i386/reloc64.s: Likewise.
* testsuite/gas/i386/ilp32/reloc64.s: Likewise.
* testsuite/gas/i386/reloc32.l: Updated.
* testsuite/gas/i386/reloc64.l: Likewise.
* testsuite/gas/i386/ilp32/reloc64.l: Likewise.
ld/
PR gas/23997
* testsuite/ld-i386/i386.exp: Run PR gas/23997 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr23997a.s: New file.
* testsuite/ld-x86-64/pr23997b.c: Likewise.
* testsuite/ld-x86-64/pr23997c.c: Likewise.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
gas/
PR gas/23954
* config/tc-riscv.c (my_getSmallExpression): Expand comment for
register support. Set expr_end if parse a register.
(riscv_ip) <'u'>: Break if imm_expr is not a symbol or constant.
* testsuite/gas/riscv/auipc-parsing.d: New.
* testsuite/gas/riscv/auipc-parsing.l: New.
* testsuite/gas/riscv/auipc-parsing.s: New.
Put back BFD_RELOC_X86_64_GOTPCREL in TC_FORCE_RELOCATION_LOCAL, which
was removed by
commit 56ceb5b540
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Thu Oct 22 04:49:20 2015 -0700
Add R_X86_64_[REX_]GOTPCRELX support to gas and ld
by accident.
PR gas/23956
gas/
* config/tc-riscv.c (validate_riscv_insn) <'1'>: New case.
(percent_op_null): New.
(riscv_ip) <'j'>: Set imm_reloc before p.
<'1'>: New case.
<'0'>: Use percent_op_null and don't set imm_reloc.
<alu_op>: Handle *args == '1'.
* testsuite/gas/riscv/tprel-add.d: New.
* testsuite/gas/riscv/tprel-add.l: New.
* testsuite/gas/riscv/tprel-add.s: New.
opcodes/
* riscv-opc.c (riscv_opcodes) <"add">: Use 1 not 0 for fourth arg.
This patch started off just adding the warnings in tc-ppc.c about
incorrect usage of @l, @h and @ha in instructions that don't have
16-bit D-form fields. That unfortunately showed up three warnings in
ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like
e_li r3, IV_table@l+0x00
which was being assembled to
8: 70 60 00 00 e_li r3,0
a: R_PPC_ADDR16_LO IV_table
The ADDR16_LO reloc is of course completely bogus on e_li, which has
a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit
in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800.
Applying an ADDR16_LO reloc to the instruction potentially changes
the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i,
e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis,
e_and2is, or some invalid encodings.
Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was
added 2017-09-05 but I can't see code in gas to generate the
relocation. In any case, VLE_ADDR20 probably doesn't have the correct
semantics for @l since ideally you'd want an @l to pair with @h or @ha
to generate a 32-bit constant. Thus @l should only produce a 16-bit
value, I think. So we need some more relocations to handle e_li it
seems, or as I do in this patch, modify the behaviour of existing
relocations when applied to e_li instructions.
include/
* opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct
mask and shift value.
(ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li
specially.
gas/
* config/tc-ppc.c (md_assemble): Adjust relocs for VLE before
TLS tweaks. Handle e_li. Warn on unexpected operand field
for lo16/hi16/ha16 relocs.
The RISC-V assembler generates fake labels with the name '.L0 ' as
part of the debug information (see
gas/config/tc-riscv.h:FAKE_LABEL_NAME).
The problem is that currently, when disassembling an object file, the
output looks like this (this is an example from the GDB testsuite, but
is pretty representative of anything with debug information):
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
0000000000000026 <.L0 >:
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
0000000000000034 <.L0 >:
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L0 >
0000000000000046 <.L0 >:
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
0000000000000050 <.L0 >:
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <.L0 +0xe>
0000000000000066 <.L0 >:
66: 4785 li a5,1
68: a869 j 102 <.L0 >
000000000000006a <.L0 >:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L0 +0x8>
The frequent repeated '.L0 ' labels are pointless, as they are
non-unique there's no way to match a use of '.L0 ' to its appearence
in the output, so we'd be better off just not printing it at all.
That's what this patch does by defining a 'symbol_is_valid' method for
RISC-V. With this commit, the same disassembly now looks like this:
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L4>
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <main+0x40>
66: 4785 li a5,1
68: a869 j 102 <.L5>
000000000000006a <.L4>:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L4+0x8>
In order to share the fake label between the assembler and the
libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME
and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have
just moved FAKE_LABEL_NAME to the include file, however, I thnk this
would be confusing, someone working on the assembler would likely not
expect to find FAKE_LABEL_NAME defined outside of the assembler source
tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the
assembler standard FAKE_LABEL_ defines in the assembler source, but
still share the RISCV_FAKE_LABEL_* with libopcodes.
gas/ChangeLog:
* config/tc-riscv.h (FAKE_LABEL_NAME): Define as
RISCV_FAKE_LABEL_NAME.
(FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR.
include/ChangeLog:
* dis-asm.h (riscv_symbol_is_valid): Declare.
* opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define.
(RISCV_FAKE_LABEL_CHAR): Define.
opcodes/ChangeLog:
* disassembler.c (disassemble_init_for_target): Add RISC-V
initialisation.
* riscv-dis.c (riscv_symbol_is_valid): New function.
Armv8.3-A has another key used in pointer authentication called the
B-key (other than the A-key that is already supported). In order for
stack unwinders to work it is necessary to be able to identify frames
that have been signed with the B-key rather than the A-key and it was
felt that keeping this as an augmentation character in the CIE was the
best bet. The DWARF extensions for ARM therefore propose to add a new
augmentation character 'B' to the CIE augmentation string and the
corresponding cfi directive ".cfi_b_key_frame". I've made the relevant
changes to GAS and LD to add support for B-key unwinding, which required
modifying LD to check for 'B' in the augmentation string, adding the
".cfi_b_key_frame" directive to GAS and adding a "pauth_key" field to
GAS's fde_entry and cie_entry structs.
The pointer authentication instructions will behave as NOPs on
architectures that don't support them, and so a check for the
architecture being assembled for is not necessary since there will be no
behavioural difference between augmentation strings with and without the
'B' character on such architectures.
2018-12-05 Sam Tebbs <sam.tebbs@arm.com>
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Add check for 'B'.
gas/
* dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation.
(alloc_fde_entry): Add tc_fde_entry_init_extra invocation.
(output_cie): Add tc_output_cie_extra invocation.
(select_cie_for_fde): Add tc_cie_fde_equivalent_extra and
tc_cie_entry_init_extra invocation.
(frch_cfi_data, cfa_save_data): Move to dwgencfi.h.
* config/tc-aarch64.c (s_aarch64_cfi_b_key_frame): Declare.
(md_pseudo_table): Add "cfi_b_key_frame".
* config/tc-aarch64.h (tc_fde_entry_extras, tc_cie_entry_extras,
tc_fde_entry_init_extra, tc_output_cie_extra,
tc_cie_fde_equivalent_extra, tc_cie_entry_init_extra): Define.
* dw2gencfi.h (struct fde_entry): Add tc_fde_entry_extras invocation.
(pointer_auth_key): Define.
(frch_cfi_data, cfa_save_data): Move from dwgencfi.c.
* doc/c-aarch64.texi (.cfi_b_key_frame): Add documentation.
* testsuite/gas/aarch64/(pac_ab_key.d, pac_ab_key.s): New file.
ARM Architecture Reference Manual for the profile ARMv8-A, Issue C.a,
states that MOV (register) is an alias of the ORR (shifted register)
iff shift == '00' && imm6 == '000000' && Rn == '11111'. However, mov
is currently preferred for a broader range of orr instructions, which
is incorrect.
2018-12-03 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
opcodes:
PR 23193
PR 19721
* aarch64-tbl.h (aarch64_opcode_table): Only disassemble an ORR
encoding as MOV if the shift operation is a left shift of zero.
gas:
PR 23193
PR 19721
* testsuite/gas/aarch64/pr19721.s: Add new test cases.
* testsuite/gas/aarch64/pr19721.d: Correct existing test
cases and add new ones.
This removes ineffectual and wrong code caching section names in
gas/stabs.c. Code like
seg = subseg_new (name, 0);
...
if (seg->name == name)
seg->name = xstrdup (name);
with the idea of being able to unconditionally free "name" later no
longer works. "name" is referenced by the section hash table as well
as in the section->name field. It would be possible to use
"bfd_rename_section (stdoutput, seg, xstrdup (name))", but instead I
opted for a fairly straight-forward approach of adding extra
parameters to two functions to indicate section name strings should be
freed if possible.
PR 23938
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (get_stab_string_offset): Add free_stabstr_secname
parameter. Free stabstr_secname if unused as section name.
Don't xstrdup name when used.
(s_stab_generic): Remove forward declaration. Add
stab_secname_obstack_end param. Reference notes obstack via
macros. Delete cached_secname. Adjust get_stab_string_offset
call. Free stab_secname if unused as section name.
(s_stab): Adjust s_stab_generic call.
(s_xstab): Likewise. Delete saved_secname and saved_strsecname.
* config/obj-elf.c (obj_elf_init_stab_section): Adjust
get_stab_string_offset call.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* testsuite/gas/all/pr23938.s: New test.
* testsuite/gas/all/gas.exp: Run it.
`-march=r5900' already enables the R5900 short loop workaround.
However, the R5900 ISA and most other MIPS ISAs are mutually
exclusive since R5900-specific instructions are generated as well.
The `-mfix-r5900' option can be used in combination with e.g.
`-mips2' or `-mips3' to generate generic MIPS binaries that also
work with the R5900 target.
This change has been tested with `make RUNTESTFLAGS=mips.exp
check-gas' for the targets `mipsr5900el-unknown-linux-gnu',
`mipsr5900el-elf' and `mips3-unknown-linux-gnu'.
gas/
* config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit):
New variables.
(options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900
enumeration constants.
(md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options.
(can_swap_branch_p, md_parse_option, mips_after_parse_args):
Handle the new options.
(md_show_usage): Document the `-mfix-r5900' option.
* doc/as.texi: Likewise.
* doc/c-mips.texi: Likewise.
* testsuite/gas/mips/mips.exp: Run R5900 dump tests.
* testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option.
* testsuite/gas/mips/r5900-fix.s: Likewise.
* testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'.
* testsuite/gas/mips/r5900-no-fix.s: Likewise.
Peter Bergner
H.J. Lu
Jim Wilson
Alan Modra
Szabolcs Nagy
Jose E. Marchesi
John Darrington
Sudakshina Das
Faraz Shahbazker
Andre Vieira
Nick Clifton
Matthew Malcomson
Alexandre Oliva
Andrew Bennett
Matthew Fortune
Jozef Lawrynowicz
Matthew Fortune
Max Filippov
Rainer Orth
Robert Suchanek
Xuepeng Guo
Peter Bergner
Li Hao
Christian Eggers
Andreas Krebbel
Kyrylo Tkachov
Paul Hua
Tamar Christina
Eric Botcazou
Wu Heng
Srinath Parvathaneni
Andrew Paprocki
Yoshinori Sato
Jeff Law
Sam Tebbs
Andrew Burgess
Egeyar Bagcioglu
Fredrik Noring
Thomas Preud'homme