Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Remove the g1 and g2 members of DisasCompare, as they were
used to track which temps needed to be freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record temps for later freeing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record temps for later freeing.
Replace the few uses with tcg_temp_new.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
This removes gen_rvalue_free, gen_rvalue_free_manual and
free_variables, whose only purpose was to emit tcg_temp_free.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This variable is not used, only allocated and freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This variable is not used, only allocated and freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record for later freeing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only the use within cpu_reg requires a writable temp,
so inline new_tmp_a64_zero there. All other uses are
fine with a constant temp, so use tcg_constant_i64(0).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now a simple wrapper for tcg_temp_new_i64.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries,
therefore there's no need to record temps for later freeing.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This field was only used to avoid freeing globals.
Since we no longer free any temps, this is dead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass CPUTLBEntryFull to get_physical_address instead
of a collection of pointers.
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cmo.prefetch instructions are nops for QEMU (no emulation of the
memory hierarchy, no illegal instructions, no permission faults, no
traps).
Add a comment noting where they would be decoded in case cbo.prefetch
instructions become relevant in the future.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-5-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Zicbom is the Cache-Block Management extension defined in the already
ratified RISC-V Base Cache Management Operation (CBO) ISA extension [1].
The extension contains three instructions: cbo.clean, cbo.flush and
cbo.inval. All of them must be implemented in the same group as LQ and
cbo.zero due to overlapping patterns.
All these instructions can throw a Illegal Instruction/Virtual
Instruction exception, similar to the existing cbo.zero. The same
check_zicbo_envcfg() is used to handle these exceptions.
Aside from that, these instructions also need to handle page faults and
guest page faults. This is done in a new check_zicbom_access() helper.
As with Zicboz, the cache block size for Zicbom is also configurable.
Note that the spec determines that Zicbo[mp] and Zicboz can have
different cache sizes (Section 2.7 of [1]), so we also include a
'cbom_blocksize' to go along with the existing 'cboz_blocksize'. They
are set to the same size, so unless users want to play around with the
settings both sizes will be the same.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224132536.552293-4-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The RISC-V base cache management operation (CBO) ISA extension has been
ratified. It defines three extensions: Cache-Block Management, Cache-Block
Prefetch and Cache-Block Zero. More information about the spec can be
found at [1].
Let's start by implementing the Cache-Block Zero extension, Zicboz. It
uses the cbo.zero instruction that, as with all CBO instructions that
will be added later, needs to be implemented in an overlap group with
the LQ instruction due to overlapping patterns.
cbo.zero throws a Illegal Instruction/Virtual Instruction exception
depending on CSR state. This is also the case for the remaining cbo
instructions we're going to add next, so create a check_zicbo_envcfg()
that will be used by all Zicbo[mz] instructions.
[1] https://github.com/riscv/riscv-CMOs/blob/master/specifications/cmobase-v1.0.1.pdf
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230224132536.552293-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This queue includes a stub implementation for the dcblc instruction to
avoid an illegal instrunction exception when using u-boot with mpc85xx.
It also includes a PHB fix with user-created pnv-phb devices and
Skiboot.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZAJllhYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFk02YA/2YnJl0aRw6hgiayI2rLbcwQcVfp
oGAhh4QmqFL2UJw2AQDra0kh9sxBSEcqhltNnOa08tBnHPts3W/A8nmFtCd4Cw==
=VRNM
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230303' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-03-03:
This queue includes a stub implementation for the dcblc instruction to
avoid an illegal instrunction exception when using u-boot with mpc85xx.
It also includes a PHB fix with user-created pnv-phb devices and
Skiboot.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZAJllhYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFk02YA/2YnJl0aRw6hgiayI2rLbcwQcVfp
# oGAhh4QmqFL2UJw2AQDra0kh9sxBSEcqhltNnOa08tBnHPts3W/A8nmFtCd4Cw==
# =VRNM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 21:24:38 GMT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230303' of https://gitlab.com/danielhb/qemu:
pnv_phb4_pec: Simplify/align code to parent user-created PHBs
pnv_phb4_pec: Move pnv_phb4_get_pec() to rightful file
pnv_phb4_pec: Only export existing PHBs to the device tree
pnv_phb4_pec: Keep track of instantiated PHBs
target/ppc/translate: Add dummy implementation for dcblc instruction
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dcblc instruction is used by u-boot in mpc85xx/start.S. Without it,
an illegal istruction exception is generated very early in the boot
process where the processor is not yet able to handle exceptions. See:
https://github.com/u-boot/u-boot/blob/v2023.01/arch/powerpc/cpu/mpc85xx/start.S#L1840
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20230130184950.5241-1-shentey@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZAFb5wAKCRBAov/yOSY+
35hmA/sHIGXU5zQV6p6DBILFGEE6x91sPtV8WKY3zujVY0hsfD4SF6bKTaKJYisZ
EztZZ5/EunQcu/vfgO46YtYysEWzrzGiinbZ5lAjxk6sdlBYlfcTQLAQEEW3zPbP
qB3SiiGmGQ0iYFHIlkyi1tCF5OEmqqQKrHYrNVk6cGBoJle2PA==
=giPH
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20230303' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20230303
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZAFb5wAKCRBAov/yOSY+
# 35hmA/sHIGXU5zQV6p6DBILFGEE6x91sPtV8WKY3zujVY0hsfD4SF6bKTaKJYisZ
# EztZZ5/EunQcu/vfgO46YtYysEWzrzGiinbZ5lAjxk6sdlBYlfcTQLAQEEW3zPbP
# qB3SiiGmGQ0iYFHIlkyi1tCF5OEmqqQKrHYrNVk6cGBoJle2PA==
# =giPH
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 02:31:03 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230303' of https://gitlab.com/gaosong/qemu:
hw/loongarch/virt: add system_powerdown hmp command support
target/loongarch: Implement Chip Configuraiton Version Register(0x0000)
docs/system/loongarch: update loongson3.rst and rename it to virt.rst
loongarch: Add smbios command line option.
hw/loongarch/virt: rename PCH_PIC_IRQ_OFFSET with VIRT_GSI_BASE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
-----BEGIN PGP SIGNATURE-----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=FMkl
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu into staging
Fifth RISC-V PR for QEMU 8.0
* Experimantal support for writable misa.
* Support for Svadu extension.
* Support for the Zicond extension.
* Fixes to gdbstub, CSR accesses, dependencies between the various
floating-point exceptions, and XTheadMemPair.
* Many cleanups.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmQBrrUTHHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYicHrD/9dHBDOYNwyT/C2Q31NHMcEsVN6J0kW
# 0sVyDb2/TUFoXmClMwS6jZYQQwWD7tjjB7BDcvPJ0QKLblDoZFX5JyxpQypIKWcs
# It/E6mk7aG0epH1GoB/mbHFDbeCm4tbo7Vf6cQGpV/vGWBUaOS67c5nenUK7Tlqw
# NTr9qak+9NYVswvMHZ0lUKtO12W1g/1EVkict2/90P2snWbPZ+foWomifGNljmhy
# 5WtCNp27uBKF/uuD9xubLOxSEcqtZFTuKJy7U3azV4I0IKfd6Is83Kd0IwBOrTgT
# MYkFdtQE1jgbkXYVZjft6ymLuqJrcLFYwD8C2zdNAXJLk1Y+MCtGafgW6f6SkT6B
# FrNaSOqQ9xXiaNStF2FwYdmZ476zcY+eEg2rH1grTwCMewZ9r7m3+H8iat/tR0pt
# 9scYAre1oaL33LB6DGZi3JkssNYyj42sutcNao2hQXRHcsh+vv1dLR+Di2mO6Ji5
# MNfvEgCrWWZjNVSwvhwCXdJPqqpyTbkRf8HJEp0gWvjk6VoF8sWidDw/8oMLj+wW
# qZur7GNe+piJNvly85aFSL9J3SX7RyNeDzX/yK3b4k+g6I/ZziQaNgQtB9gYcm6w
# mj3snCwRbEMEhdhPH0+Chm0Wb97knHJS14Vq9wCe2xh16o3HM5FspboLFkGZMjDV
# tRDPFb7pitwdlA==
# =FMkl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 03 Mar 2023 08:24:21 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230303' of https://gitlab.com/palmer-dabbelt/qemu: (59 commits)
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfig
target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointers
target/riscv/csr.c: simplify mctr()
target/riscv/csr.c: use env_archcpu() in ctr()
target/riscv: Export Svadu property
target/riscv: Add *envcfg.HADE related check in address translation
target/riscv: Add *envcfg.PBMTE related check in address translation
target/riscv: Add csr support for svadu
target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and henvcfg
target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and Svpbmt/Sstc extensions
hw/riscv: Move the dtb load bits outside of create_fdt()
hw/riscv: Skip re-generating DT nodes for a given DTB
target/riscv: Add support for Zicond extension
RISC-V: XTheadMemPair: Remove register restrictions for store-pair
target/riscv: Fix checking of whether instruciton at 'pc_next' spans pages
target/riscv: Group all predicate() routines together
target/riscv: Drop priv level check in mseccfg predicate()
target/riscv: Allow debugger to access sstc CSRs
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the 3A5000 manual 4.1 implement Chip Configuration
Version Register(0x0000).
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230227071046.1445572-1-gaosong@loongson.cn>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Move the QMP functions from cpu_init.c (which is always compiled)
to monitor.c (which is only compiled when system-emulation
is selected). Rename monitor.c to arm-qmp-cmds.c.
Note ppc_cpu_class_by_name() is used by both file units, so we
expose its prototype in "cpu-qom.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230223155540.30370-5-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Extract the QMP functions from cpu.c (which is always compiled)
to the new 'loongarch-qmp-cmds.c' unit (which is only compiled
when system emulation is selected).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230223155540.30370-4-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Guard qmp_query_cpu_definitions() within CONFIG_USER_ONLY; move
x86_cpu_class_check_missing_features() closer since it is only used
by this QMP command handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230223155540.30370-3-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit a0e61807a3 ("qapi: Remove QMP events and commands from
user-mode builds") we don't generate the "qapi-commands-machine.h"
header in a user-emulation-only build.
Move the QMP functions from helper.c (which is always compiled)
to monitor.c (which is only compiled when system-emulation
is selected). Rename monitor.c to arm-qmp-cmds.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230223155540.30370-2-philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Straightforward conflict with commit 9def656e7a resolved]
Daniel Henrique Barboza <dbarboza@ventanamicro.com> says:
This is a re-send of patch 1, which is already reviewed, with a
follow-up that uses riscv_cpu_cfg() in the remaining of the file. This
was suggested by Weiwei Li in the "[PATCH 0/4] RISCVCPUConfig related
cleanups" review. Patch 1 makes the work of patch 2 easier since it
eliminated some uses of env_archcpu() we want to avoid.
* b4-shazam-merge:
target/riscv/vector_helper.c: avoid env_archcpu() when reading RISCVCPUConfig
target/riscv/vector_helper.c: create vext_set_tail_elems_1s()
Message-ID: <20230226170514.588071-1-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This file has several uses of env_archcpu() that are used solely to read
cfg->vlen. Use the new riscv_cpu_cfg() inline instead.
Suggested-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230226170514.588071-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 752614cab8 ("target/riscv: rvv: Add tail agnostic for vector
load / store instructions") added code to set the tail elements to 1 in
the end of vext_ldst_stride(), vext_ldst_us(), vext_ldst_index() and
vext_ldff(). Aside from a env->vl versus an evl value being used in the
first loop, the code is being repeated 4 times.
Create a helper to avoid code repetition in all those functions.
Arguments that are used in the callers (nf, esz and max_elems) are
passed as arguments. All other values are being derived inside the
helper.
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230226170514.588071-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Daniel Henrique Barboza <dbarboza@ventanamicro.com> says:
These cleanups were suggested by LIU Zhiwei during the review of
d3e6d5762b ("Merge patch series "make write_misa a no-op and FEATURE_*
cleanups"").
* b4-shazam-merge:
target/riscv/csr.c: avoid env_archcpu() usages when reading RISCVCPUConfig
target/riscv/csr.c: use riscv_cpu_cfg() to avoid env_cpu() pointers
target/riscv/csr.c: simplify mctr()
target/riscv/csr.c: use env_archcpu() in ctr()
Message-ID: <20230224174520.92490-1-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Retrieving the CPU pointer using env_archcpu() just to access cpu->cfg
can be avoided by using riscv_cpu_cfg().
Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230224174520.92490-5-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
A common trend in this file is to retrieve a RISCVCPU pointer by first
retrieving a CPUState pointer via env_cpu(). The CPU pointer is used
only to access the RISCVCPUConfig object and nothing else.
Let's use riscv_cpu_cfg() to access what we need directly without these
2 pointers.
Suggested-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230224174520.92490-4-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use riscv_cpu_cfg() to retrieve pmu_num.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230224174520.92490-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We don't need to use env_cpu() and CPUState().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230224174520.92490-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Weiwei Li <liweiwei@iscas.ac.cn> says:
This patchset adds support svadu extension. It also fixes some
relationship between *envcfg fields and Svpbmt/Sstc extensions.
Specification for Svadu extension can be found in:
https://github.com/riscv/riscv-svadu
* b4-shazam-merge:
target/riscv: Export Svadu property
target/riscv: Add *envcfg.HADE related check in address translation
target/riscv: Add *envcfg.PBMTE related check in address translation
target/riscv: Add csr support for svadu
target/riscv: Fix the relationship of PBMTE/STCE fields between menvcfg and henvcfg
target/riscv: Fix the relationship between menvcfg.PBMTE/STCE and Svpbmt/Sstc extensions
Message-ID: <20230224040852.37109-1-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Set it default true for backward compatibility
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-7-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When menvcfg.HADE is 1, hardware updating of PTE A/D bits is enabled
during single-stage address translation. When the hypervisor extension is
implemented, if menvcfg.HADE is 1, hardware updating of PTE A/D bits is
enabled during G-stage address translation.
Set *envcfg.HADE default true for backward compatibility.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-6-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
menvcfg.PBMTE bit controls whether the Svpbmt extension is available
for use in S-mode and G-stage address translation.
henvcfg.PBMTE bit controls whether the Svpbmt extension is available
for use in VS-stage address translation.
Set *envcfg.PBMTE default true for backward compatibility.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-5-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add ext_svadu property
Add HADE field in *envcfg:
* menvcfg.HADE is read-only zero if Svadu is not implemented.
* henvcfg.HADE is read-only zero if menvcfg.HADE is zero.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-4-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
henvcfg.PBMTE/STCE are read-only zero if menvcfg.PBMTE/STCE are zero.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-3-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
menvcfg.PBMTE/STCE are read-only zero if Svpbmt/Sstc are not implemented.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230224040852.37109-2-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The spec can be found in https://github.com/riscv/riscv-zicond.
Two instructions are added:
- czero.eqz: Moves zero to a register rd, if the condition rs2 is
equal to zero, otherwise moves rs1 to rd.
- czero.nez: Moves zero to a register rd, if the condition rs2 is
nonzero, otherwise moves rs1 to rd.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230221091009.36545-1-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The XTheadMemPair does not define any restrictions for store-pair
instructions (th.sdd or th.swd). However, the current code enforces
the restrictions that are required for load-pair instructions.
Let's fix this by removing this code.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230220095612.1529031-1-christoph.muellner@vrull.eu>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This bug has a noticeable behavior of falling back to the main loop and
respawning a redundant translation block including a single instruction
when the end address of the compressive instruction is exactly on a page
boundary, and slows down running system performance.
Signed-off-by: Shaobo Song <songshaobo@eswincomputing.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230220072732.568-1-songshaobo@eswincomputing.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Bin Meng <bmeng@tinylab.org> says:
At present gdbstub reports an incorrect / incomplete CSR list in the
target description XML, for example:
- menvcfg is reported in 'sifive_u' machine
- fcsr is missing in a F/D enabled processor
The issue is caused by:
- priv spec version check is missing when reporting CSRs
- CSR predicate() routine is called without turning on the debugger flag
* b4-shazam-merge:
target/riscv: Group all predicate() routines together
target/riscv: Drop priv level check in mseccfg predicate()
target/riscv: Allow debugger to access sstc CSRs
target/riscv: Allow debugger to access {h, s}stateen CSRs
target/riscv: Allow debugger to access seed CSR
target/riscv: Allow debugger to access user timer and counter CSRs
target/riscv: gdbstub: Drop the vector CSRs in riscv-vector.xml
target/riscv: gdbstub: Turn on debugger mode before calling CSR predicate()
target/riscv: Avoid reporting odd-numbered pmpcfgX in the CSR XML for RV64
target/riscv: Simplify getting RISCVCPU pointer from env
target/riscv: Simplify {read, write}_pmpcfg() a little bit
target/riscv: Use 'bool' type for read_only
target/riscv: Coding style fixes in csr.c
target/riscv: gdbstub: Do not generate CSR XML if Zicsr is disabled
target/riscv: gdbstub: Minor change for better readability
target/riscv: Use g_assert() for the predicate() NULL check
target/riscv: Add some comments to clarify the priority policy of riscv_csrrw_check()
target/riscv: gdbstub: Check priv spec version before reporting CSR
Message-ID: <20230228104035.1879882-1-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move sstc()/sstc32() to where all predicate() routines live, and
smstateen_acc_ok() to near {read,write}_xenvcfg().
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-19-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv_csrrw_check() already does the generic privilege level check
hence there is no need to do the specific M-mode access check in
the mseccfg predicate().
With this change debugger can access the mseccfg CSR anytime.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-18-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present with a debugger attached sstc CSRs can only be accssed
when CPU is in M-mode, or configured correctly.
Fix it by adjusting their predicate() routine logic so that the
static config check comes before the run-time check, as well as
adding a debugger check.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-17-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present {h,s}stateen CSRs are not reported in the CSR XML
hence gdb cannot access them.
Fix it by adjusting their predicate() routine logic so that the
static config check comes before the run-time check, as well as
adding a debugger check.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-16-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present seed CSR is not reported in the CSR XML hence gdb cannot
access it.
Fix it by adding a debugger check in its predicate() routine.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-15-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present user timer and counter CSRs are not reported in the
CSR XML hence gdb cannot access them.
Fix it by adding a debugger check in their predicate() routine.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-14-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It's worth noting that the vector CSR predicate() has a similar
run-time check logic to the FPU CSR. With the previous patch our
gdbstub can correctly report these vector CSRs via the CSR xml.
Commit 719d3561b2 ("target/riscv: gdb: support vector registers for rv64 & rv32")
inserted these vector CSRs in an ad-hoc, non-standard way in the
riscv-vector.xml. Now we can treat these CSRs no different from
other CSRs.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-13-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since commit 94452ac4cf ("target/riscv: remove fflags, frm, and fcsr from riscv-*-fpu.xml")
the 3 FPU CSRs are removed from the XML target decription. The
original intent of that commit was based on the assumption that
the 3 FPU CSRs will show up in the riscv-csr.xml so the ones in
riscv-*-fpu.xml are redundant. But unforuantely that is not true.
As the FPU CSR predicate() has a run-time check on MSTATUS.FS,
at the time when CSR XML is generated MSTATUS.FS is unset, hence
no FPU CSRs will be reported.
The FPU CSR predicate() already considered such a case of being
accessed by a debugger. All we need to do is to turn on debugger
mode before calling predicate().
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-12-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present the odd-numbered PMP configuration registers for RV64 are
reported in the CSR XML by QEMU gdbstub. However these registers do
not exist on RV64 so trying to access them from gdb results in 'E14'.
Move the pmpcfgX index check from the actual read/write routine to
the PMP CSR predicate() routine, so that non-existent pmpcfgX won't
be reported in the CSR XML for RV64.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-11-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use env_archcpu() to get RISCVCPU pointer from env directly.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-10-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use the register index that has already been calculated in the
pmpcfg_csr_{read,write} call.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-9-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The read_only variable is currently declared as an 'int', but it
should really be a 'bool'.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-8-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There is no need to generate the CSR XML if the Zicsr extension
is not enabled.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-6-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use a variable 'base_reg' to represent cs->gdb_num_regs so that
the call to ricsv_gen_dynamic_vector_xml() can be placed in one
single line for better readability.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-5-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At present riscv_csrrw_check() checks the CSR predicate() against
NULL and throws RISCV_EXCP_ILLEGAL_INST if it is NULL. But this is
a pure software check, and has nothing to do with the emulation of
the hardware behavior, thus it is inappropriate to return illegal
instruction exception when software forgets to install the hook.
Change to use g_assert() instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-4-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The priority policy of riscv_csrrw_check() was once adjusted in
commit eacaf44019 ("target/riscv: Fix priority of csr related check in riscv_csrrw_check")
whose commit message says the CSR existence check should come before
the access control check, but the code changes did not agree with
the commit message, that the predicate() check actually came after
the read / write check.
In fact this was intentional. Add some comments there so that people
won't bother trying to change it without a solid reason.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-3-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The gdbstub CSR XML is dynamically generated according to the result
of the CSR predicate() result. This has been working fine until
commit 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
introduced the privilege spec version check in riscv_csrrw_check().
When debugging the 'sifive_u' machine whose priv spec is at 1.10,
gdbstub reports priv spec 1.12 CSRs like menvcfg in the XML, hence
we see "remote failure reply 'E14'" message when examining all CSRs
via "info register system" from gdb.
Add the priv spec version check in the CSR XML generation logic to
fix this issue.
Fixes: 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-2-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V defines a handful of extensions related to floating point, along
with various relationships between these and other extensions. This
patch set adds support for the Zvfh, Zvhfmin, and Zve64d extensions;
along with a handful of fixes and cleanups related to the other
floating-point extension relationships.
* b4-shazam-merge
target/riscv: Expose properties for Zv* extensions
target/riscv: Simplify check for EEW = 64 in trans_rvv.c.inc
target/riscv: Fix check for vector load/store instructions when EEW=64
target/riscv: Add support for Zvfh/zvfhmin extensions
target/riscv: Remove rebundunt check for zve32f and zve64f
target/riscv: Replace check for F/D to Zve32f/Zve64d in trans_rvv.c.inc
target/riscv: Simplify check for Zve32f and Zve64f
target/riscv: Indent fixes in cpu.c
target/riscv: Add propertie check for Zvfh{min} extensions
target/riscv: Fix relationship between V, Zve*, F and D
target/riscv: Add cfg properties for Zv* extensions
target/riscv: Simplify the check for Zfhmin and Zhinxmin
target/riscv: Fix the relationship between Zhinxmin and Zhinx
target/riscv: Fix the relationship between Zfhmin and Zfh
Message-ID: <20230215020539.4788-1-liweiwei@iscas.ac.cn>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Only V extension supports EEW = 64 in these cases: Zve64* extensions don't
support EEW = 64 in these cases as commented before the check.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-14-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The V extension supports all vector load and store instructions except
the V extension does not support EEW=64 for index values when XLEN=32.
(Section 18.3)
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-13-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Zvfh supports vector float point instructions with SEW = 16
and supports conversions between 8-bit integers and binary16 values.
Zvfhmin supports vfwcvt.f.f.v and vfncvt.f.f.w instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-12-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Require_zve32/64f have been overlapped by require_rvf/require_scale_rvf.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-11-liweiwei@iscas.ac.cn>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Check for Zve32f/Zve64d can overlap check for F/D.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-10-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
V/Zve64f depend on Zve32f, so we can only check Zve32f in these cases.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-9-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We needn't check Zfh and Zhinx in these instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-4-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Just like zfh and zfhmin, Zhinxmin is part of Zhinx so Zhinxmin
will be enabled when Zhinx is enabled.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-3-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Zfhmin is part of Zfh, so Zfhmin will be enabled when Zfh is enabled.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230215020539.4788-2-liweiwei@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The attribute is no longer used since we can retrieve all the enabled
features in the hart by using cpu->cfg instead.
Remove env->feature, riscv_feature() and riscv_set_feature(). We also
need to bump vmstate_riscv_cpu version_id and minimal_version_id since
'features' is no longer being migrated.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-11-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISCV_FEATURE_MMU is set whether cpu->cfg.mmu is set, so let's just use
the flag directly instead.
With this change the enum is also removed. It is worth noticing that
this enum, and all the RISCV_FEATURES_* that were contained in it,
predates the existence of the cpu->cfg object. Today, using cpu->cfg is
an easier way to retrieve all the features and extensions enabled in the
hart.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-10-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISCV_FEATURE_PMP is being set via riscv_set_feature() by mirroring the
cpu->cfg.pmp flag. Use the flag instead.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-8-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISCV_FEATURE_EPMP is always set to the same value as the cpu->cfg.epmp
flag. Use the flag directly.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-7-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Instead of silently ignoring the EPMP setting if there is no PMP
available, error out informing the user that EPMP depends on PMP
support:
$ ./qemu-system-riscv64 -cpu rv64,pmp=false,x-epmp=true
qemu-system-riscv64: Invalid configuration: EPMP requires PMP support
This will force users to pick saner options in the QEMU command line.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-6-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISCV_FEATURE_DEBUG will always follow the value defined by
cpu->cfg.debug flag. Read the flag instead.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-5-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At this moment, and apparently since ever, we have no way of enabling
RISCV_FEATURE_MISA. This means that all the code from write_misa(), all
the nuts and bolts that handles how to properly write this CSR, has
always been a no-op as well because write_misa() will always exit
earlier.
This seems to be benign in the majority of cases. Booting an Ubuntu
'virt' guest and logging all the calls to 'write_misa' shows that no
writes to MISA CSR was attempted. Writing MISA, i.e. enabling/disabling
RISC-V extensions after the machine is powered on, seems to be a niche
use.
After discussions in the mailing list, most notably in [1], we reached
the consensus that this code is not suited to be exposed to users
because it's not well tested, but at the same time removing it is a bit
extreme because we would like to fix it, and it's easier to do so with
the code available to use instead of fetching it from git log.
The approach taken here is to get rid of RISCV_FEATURE_MISA altogether
and use a new experimental flag called x-misa-w. The default value is
false, meaning that we're keeping the existing behavior of doing nothing
if a write_misa() is attempted. As with any existing experimental flag,
x-misa-w is also a temporary flag that we need to remove once we fix
write_misa().
[1] https://lists.gnu.org/archive/html/qemu-devel/2023-02/msg05092.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-4-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The masking done using env->misa_ext_mask already filters any extension
that QEMU doesn't support. If the hart supports the extension then QEMU
supports it as well.
If the masking done by env->misa_ext_mask is somehow letting unsupported
QEMU extensions pass by, misa_ext_mask itself needs to be fixed instead.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230222185205.355361-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We're going to do changes that requires accessing the RISCVCPUConfig
struct from the RISCVCPU, having access only to a CPURISCVState 'env'
pointer. Add a helper to make the code easier to read.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20230222185205.355361-2-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since tcg_temp_new_* is now identical, use those.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new is now identical, use that.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new is now identical, use that.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new is now identical, use that.
In some cases we can avoid a copy from A0 or T0.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used at all, just some unused
macro re-definitions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now equivalent to gen_tmp.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new_* is now identical, use those.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new is now identical, use that.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since tcg_temp_new_* is now identical, use those.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we now get TEMP_TB temporaries by default, we no longer
need to make copies across these loops. These were the only
uses of new_tmp_a64_local(), so remove that as well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-27-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-26-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230227135202.9710-25-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-24-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-23-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-22-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-21-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-20-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-19-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-18-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-17-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-16-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-15-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-14-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-11-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-10-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-8-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-7-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-3-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The default number of PIRQs is set to 256 to avoid issues with 32-bit MSI
devices. Allow it to be increased if the user desires.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The way that Xen handles MSI PIRQs is kind of awful.
There is a special MSI message which targets a PIRQ. The vector in the
low bits of data must be zero. The low 8 bits of the PIRQ# are in the
destination ID field, the extended destination ID field is unused, and
instead the high bits of the PIRQ# are in the high 32 bits of the address.
Using the high bits of the address means that we can't intercept and
translate these messages in kvm_send_msi(), because they won't be caught
by the APIC — addresses like 0x1000fee46000 aren't in the APIC's range.
So we catch them in pci_msi_trigger() instead, and deliver the event
channel directly.
That isn't even the worst part. The worst part is that Xen snoops on
writes to devices' MSI vectors while they are *masked*. When a MSI
message is written which looks like it targets a PIRQ, it remembers
the device and vector for later.
When the guest makes a hypercall to bind that PIRQ# (snooped from a
marked MSI vector) to an event channel port, Xen *unmasks* that MSI
vector on the device. Xen guests using PIRQ delivery of MSI don't
ever actually unmask the MSI for themselves.
Now that this is working we can finally enable XENFEAT_hvm_pirqs and
let the guest use it all.
Tested with passthrough igb and emulated e1000e + AHCI.
CPU0 CPU1
0: 65 0 IO-APIC 2-edge timer
1: 0 14 xen-pirq 1-ioapic-edge i8042
4: 0 846 xen-pirq 4-ioapic-edge ttyS0
8: 1 0 xen-pirq 8-ioapic-edge rtc0
9: 0 0 xen-pirq 9-ioapic-level acpi
12: 257 0 xen-pirq 12-ioapic-edge i8042
24: 9600 0 xen-percpu -virq timer0
25: 2758 0 xen-percpu -ipi resched0
26: 0 0 xen-percpu -ipi callfunc0
27: 0 0 xen-percpu -virq debug0
28: 1526 0 xen-percpu -ipi callfuncsingle0
29: 0 0 xen-percpu -ipi spinlock0
30: 0 8608 xen-percpu -virq timer1
31: 0 874 xen-percpu -ipi resched1
32: 0 0 xen-percpu -ipi callfunc1
33: 0 0 xen-percpu -virq debug1
34: 0 1617 xen-percpu -ipi callfuncsingle1
35: 0 0 xen-percpu -ipi spinlock1
36: 8 0 xen-dyn -event xenbus
37: 0 6046 xen-pirq -msi ahci[0000:00:03.0]
38: 1 0 xen-pirq -msi-x ens4
39: 0 73 xen-pirq -msi-x ens4-rx-0
40: 14 0 xen-pirq -msi-x ens4-rx-1
41: 0 32 xen-pirq -msi-x ens4-tx-0
42: 47 0 xen-pirq -msi-x ens4-tx-1
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This wires up the basic infrastructure but the actual interrupts aren't
there yet, so don't advertise it to the guest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Just hook up the basic hypercalls to stubs in xen_evtchn.c for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Just the basic shell, with the event channel hookup. It only dumps the
buffer for now; a real ring implmentation will come in a subsequent patch.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Which is used to fetch xenstore PFN and port to be used
by the guest. This is preallocated by the toolstack when
guest will just read those and use it straight away.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Xen has eight frames at 0xfeff8000 for this; we only really need two for
now and KVM puts the identity map at 0xfeffc000, so limit ourselves to
four.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Introduce support for one shot and periodic mode of Xen PV timers,
whereby timer interrupts come through a special virq event channel
with deadlines being set through:
1) set_timer_op hypercall (only oneshot)
2) vcpu_op hypercall for {set,stop}_{singleshot,periodic}_timer
hypercalls
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The guest is permitted to specify an arbitrary domain/bus/device/function
and INTX pin from which the callback IRQ shall appear to have come.
In QEMU we can only easily do this for devices that actually exist, and
even that requires us "knowing" that it's a PCMachine in order to find
the PCI root bus — although that's OK really because it's always true.
We also don't get to get notified of INTX routing changes, because we
can't do that as a passive observer; if we try to register a notifier
it will overwrite any existing notifier callback on the device.
But in practice, guests using PCI_INTX will only ever use pin A on the
Xen platform device, and won't swizzle the INTX routing after they set
it up. So this is just fine.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The GSI callback (and later PCI_INTX) is a level triggered interrupt. It
is asserted when an event channel is delivered to vCPU0, and is supposed
to be cleared when the vcpu_info->evtchn_upcall_pending field for vCPU0
is cleared again.
Thankfully, Xen does *not* assert the GSI if the guest sets its own
evtchn_upcall_pending field; we only need to assert the GSI when we
have delivered an event for ourselves. So that's the easy part, kind of.
There's a slight complexity in that we need to hold the BQL before we
can call qemu_set_irq(), and we definitely can't do that while holding
our own port_lock (because we'll need to take that from the qemu-side
functions that the PV backend drivers will call). So if we end up
wanting to set the IRQ in a context where we *don't* already hold the
BQL, defer to a BH.
However, we *do* need to poll for the evtchn_upcall_pending flag being
cleared. In an ideal world we would poll that when the EOI happens on
the PIC/IOAPIC. That's how it works in the kernel with the VFIO eventfd
pairs — one is used to trigger the interrupt, and the other works in the
other direction to 'resample' on EOI, and trigger the first eventfd
again if the line is still active.
However, QEMU doesn't seem to do that. Even VFIO level interrupts seem
to be supported by temporarily unmapping the device's BARs from the
guest when an interrupt happens, then trapping *all* MMIO to the device
and sending the 'resample' event on *every* MMIO access until the IRQ
is cleared! Maybe in future we'll plumb the 'resample' concept through
QEMU's irq framework but for now we'll do what Xen itself does: just
check the flag on every vmexit if the upcall GSI is known to be
asserted.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Add the array of virq ports to each vCPU so that we can deliver timers,
debug ports, etc. Global virqs are allocated against vCPU 0 initially,
but can be migrated to other vCPUs (when we implement that).
The kernel needs to know about VIRQ_TIMER in order to accelerate timers,
so tell it via KVM_XEN_VCPU_ATTR_TYPE_TIMER. Also save/restore the value
of the singleshot timer across migration, as the kernel will handle the
hypercalls automatically now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This finally comes with a mechanism for actually injecting events into
the guest vCPU, with all the atomic-test-and-set that's involved in
setting the bit in the shinfo, then the index in the vcpu_info, and
injecting either the lapic vector as MSI, or letting KVM inject the
bare vector.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
It calls an internal close_port() helper which will also be used from
EVTCHNOP_reset and will actually do the work to disconnect/unbind a port
once any of that is actually implemented in the first place.
That in turn calls a free_port() internal function which will be in
error paths after allocation.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This adds the basic structure for maintaining the port table and reporting
the status of ports therein.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The kvm_xen_inject_vcpu_callback_vector() function will either deliver
the per-vCPU local APIC vector (as an MSI), or just kick the vCPU out
of the kernel to trigger KVM's automatic delivery of the global vector.
Support for asserting the GSI/PCI_INTX callbacks will come later.
Also add kvm_xen_get_vcpu_info_hva() which returns the vcpu_info of
a given vCPU.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Include basic support for setting HVM_PARAM_CALLBACK_IRQ to the global
vector method HVM_PARAM_CALLBACK_TYPE_VECTOR, which is handled in-kernel
by raising the vector whenever the vCPU's vcpu_info->evtchn_upcall_pending
flag is set.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is the hook for adding the HVM_PARAM_CALLBACK_IRQ parameter in a
subsequent commit.
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Split out from another commit]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The HVMOP_set_evtchn_upcall_vector hypercall sets the per-vCPU upcall
vector, to be delivered to the local APIC just like an MSI (with an EOI).
This takes precedence over the system-wide delivery method set by the
HVMOP_set_param hypercall with HVM_PARAM_CALLBACK_IRQ. It's used by
Windows and Xen (PV shim) guests but normally not by Linux.
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Rework for upstream kernel changes and split from HVMOP_set_param]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Ditch event_channel_op_compat which was never available to HVM guests]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Allow guest to setup the vcpu runstates which is used as
steal clock.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
In order to support Linux vdso in Xen.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Handle the hypercall to set a per vcpu info, and also wire up the default
vcpu_info in the shared_info page for the first 32 vCPUs.
To avoid deadlock within KVM a vCPU thread must set its *own* vcpu_info
rather than it being set from the context in which the hypercall is
invoked.
Add the vcpu_info (and default) GPA to the vmstate_x86_cpu for migration,
and restore it in kvm_arch_put_registers() appropriately.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is simply when guest tries to register a vcpu_info
and since vcpu_info placement is optional in the minimum ABI
therefore we can just fail with -ENOSYS
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is when guest queries for support for HVMOP_pagetable_dying.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Specifically XENMEM_add_to_physmap with space XENMAPSPACE_shared_info to
allow the guest to set its shared_info page.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Use the xen_overlay device, add compat support]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Xen will "latch" the guest's 32-bit or 64-bit ("long mode") setting when
the guest writes the MSR to fill in the hypercall page, or when the guest
sets the event channel callback in HVM_PARAM_CALLBACK_IRQ.
KVM handles the former and sets the kernel's long_mode flag accordingly.
The latter will be handled in userspace. Keep them in sync by noticing
when a hypercall is made in a mode that doesn't match qemu's idea of
the guest mode, and resyncing from the kernel. Do that same sync right
before serialization too, in case the guest has set the hypercall page
but hasn't yet made a system call.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
They both do the same thing and just call sched_yield. This is enough to
stop the Linux guest panicking when running on a host kernel which doesn't
intercept SCHEDOP_poll and lets it reach userspace.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
It allows to shutdown itself via hypercall with any of the 3 reasons:
1) self-reboot
2) shutdown
3) crash
Implementing SCHEDOP_shutdown sub op let us handle crashes gracefully rather
than leading to triple faults if it remains unimplemented.
In addition, the SHUTDOWN_soft_reset reason is used for kexec, to reset
Xen shared pages and other enlightenments and leave a clean slate for the
new kernel without the hypervisor helpfully writing information at
unexpected addresses.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Ditch sched_op_compat which was never available for HVM guests,
Add SCHEDOP_soft_reset]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This is just meant to serve as an example on how we can implement
hypercalls. xen_version specifically since Qemu does all kind of
feature controllability. So handling that here seems appropriate.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Implement kvm_gva_rw() safely]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This means handling the new exit reason for Xen but still
crashing on purpose. As we implement each of the hypercalls
we will then return the right return code.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Add CPL to hypercall tracing, disallow hypercalls from CPL > 0]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
There are (at least) three different vCPU ID number spaces. One is the
internal KVM vCPU index, based purely on which vCPU was chronologically
created in the kernel first. If userspace threads are all spawned and
create their KVM vCPUs in essentially random order, then the KVM indices
are basically random too.
The second number space is the APIC ID space, which is consistent and
useful for referencing vCPUs. MSIs will specify the target vCPU using
the APIC ID, for example, and the KVM Xen APIs also take an APIC ID
from userspace whenever a vCPU needs to be specified (as opposed to
just using the appropriate vCPU fd).
The third number space is not normally relevant to the kernel, and is
the ACPI/MADT/Xen CPU number which corresponds to cs->cpu_index. But
Xen timer hypercalls use it, and Xen timer hypercalls *really* want
to be accelerated in the kernel rather than handled in userspace, so
the kernel needs to be told.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Introduce support for emulating CPUID for Xen HVM guests. It doesn't make
sense to advertise the KVM leaves to a Xen guest, so do Xen unconditionally
when the xen-version machine property is set.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
[dwmw2: Obtain xen_version from KVM property, make it automatic]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This just initializes the basic Xen support in KVM for now. Only permitted
on TYPE_PC_MACHINE because that's where the sysbus devices for Xen heap
overlay, event channel, grant tables and other stuff will exist. There's
no point having the basic hypercall support if nothing else works.
Provide sysemu/kvm_xen.h and a kvm_xen_get_caps() which will be used
later by support devices.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Change to match the recent change to probe_access_flags.
All existing callers updated to supply 0, so no change in behaviour.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_flags() as it is today uses probe_access_full(), which in
turn uses probe_access_internal() with size = 0. probe_access_internal()
then uses the size to call the tlb_fill() callback for the given CPU.
This size param ('fault_size' as probe_access_internal() calls it) is
ignored by most existing .tlb_fill callback implementations, e.g.
arm_cpu_tlb_fill(), ppc_cpu_tlb_fill(), x86_cpu_tlb_fill() and
mips_cpu_tlb_fill() to name a few.
But RISC-V riscv_cpu_tlb_fill() actually uses it. The 'size' parameter
is used to check for PMP (Physical Memory Protection) access. This is
necessary because PMP does not make any guarantees about all the bytes
of the same page having the same permissions, i.e. the same page can
have different PMP properties, so we're forced to make sub-page range
checks. To allow RISC-V emulation to do a probe_acess_flags() that
covers PMP, we need to either add a 'size' param to the existing
probe_acess_flags() or create a new interface (e.g.
probe_access_range_flags).
There are quite a few probe_* APIs already, so let's add a 'size' param
to probe_access_flags() and re-use this API. This is done by open coding
what probe_access_full() does inside probe_acess_flags() and passing the
'size' param to probe_acess_internal(). Existing probe_access_flags()
callers use size = 0 to not change their current API usage. 'size' is
asserted to enforce single page access like probe_access() already does.
No behavioral changes intended.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230223234427.521114-2-dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Various header cleaned up (removing pointless headers)
- Mark various files/code user/system specific
- Make various objects target-independent
- Remove tswapN() calls from dump.o
- Suggest g_assert_not_reached() instead of assert(0)
- qdev / qom
- Replace various container_of() by QOM cast macros
- Declare some QOM macros using OBJECT_DECLARE_TYPE()
- Embed OHCI QOM child in SM501 chipset
- hw (ISA & IDE)
- add some documentation, improve function names
- un-inline, open-code few functions
- have ISA API accessing IRQ/DMA prefer ISABus over ISADevice
- Demote IDE subsystem maintenance to "Odd Fixes"
- ui: Improve Ctrl+Alt hint on Darwin Cocoa
-----BEGIN PGP SIGNATURE-----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=AV/+
-----END PGP SIGNATURE-----
Merge tag 'buildsys-qom-qdev-ui-20230227' of https://github.com/philmd/qemu into staging
- buildsys
- Various header cleaned up (removing pointless headers)
- Mark various files/code user/system specific
- Make various objects target-independent
- Remove tswapN() calls from dump.o
- Suggest g_assert_not_reached() instead of assert(0)
- qdev / qom
- Replace various container_of() by QOM cast macros
- Declare some QOM macros using OBJECT_DECLARE_TYPE()
- Embed OHCI QOM child in SM501 chipset
- hw (ISA & IDE)
- add some documentation, improve function names
- un-inline, open-code few functions
- have ISA API accessing IRQ/DMA prefer ISABus over ISADevice
- Demote IDE subsystem maintenance to "Odd Fixes"
- ui: Improve Ctrl+Alt hint on Darwin Cocoa
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmP9IeAACgkQ4+MsLN6t
# wN7bdQ//SxJYJuQvqTT6s+O0LmP6NbqvhxCXX7YAwK2jCTM+zTgcqqRZCcisLQol
# 3ENu2UhnZmiLKHSOxatOVozbws08/u8Vl+WkW4UTMUb1yo5KPaPtq808Y95RdAJB
# 7D7B5juDGnFRAHXZz38zVk9uIuEkm+Po/pD0JQa+upBtAAgOJTqGavDNSR5+T0Yl
# VjGdwK0b10skPqiF6OABYoy/4IFHVJJFIbARZh+a7hrF0llsbzUts5JiYsOxEEHQ
# t3woUItdMnS1m0+Ty4AQ8m0Yv9y4HZOIzixvsZ+vChj5ariwUhL9/7wC/s/UCYEg
# gKVA5X8R6n/ME6DScK99a+CyR/MXkz70b/rOUZxoutXhV3xdh4X1stL4WN9W/m3z
# D4i4ZrUsDUcKCGWlj49of/dKbOPwk1+e/mT0oDZD6JzG0ODjfdVxvJ/JEV2iHgS3
# WqHuSKzX/20H9j7/MgfbQ0HjBFOQ8tl781vQzhD+y+cF/IiTsHhrE6esIWho4bob
# kfSdVydUWWRnBsnyGoRZXoEMX9tn+pu0nKxEDm2Bo2+jajsa0aZZPokgjxaz4MnD
# Hx+/p1E+8IuOn05JgzQSgTJmKFdSbya203tXIsTo1kL2aJTJ6QfMvgEPP/fkn+lS
# oQyVBFZmb1JDdTM1MxOncnlWLg74rp/CWEc+u5pSdbxMO/M/uac=
# =AV/+
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 21:34:24 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'buildsys-qom-qdev-ui-20230227' of https://github.com/philmd/qemu: (125 commits)
ui/cocoa: user friendly characters for release mouse
dump: Add create_win_dump() stub for non-x86 targets
dump: Simplify compiling win_dump.o by introducing win_dump_available()
dump: Clean included headers
dump: Replace TARGET_PAGE_SIZE -> qemu_target_page_size()
dump: Replace tswapN() -> cpu_to_dumpN()
hw/ide/pci: Add PCIIDEState::isa_irq[]
hw/ide/via: Replace magic 2 value by ARRAY_SIZE / MAX_IDE_DEVS
hw/ide/piix: Refactor pci_piix_init_ports as pci_piix_init_bus per bus
hw/ide/piix: Pass Error* to pci_piix_init_ports() for better error msg
hw/ide/piix: Remove unused includes
hw/ide/pci: Unexport bmdma_active_if()
hw/ide/ioport: Remove unnecessary includes
hw/ide: Declare ide_get_[geometry/bios_chs_trans] in 'hw/ide/internal.h'
hw/ide: Rename idebus_active_if() -> ide_bus_active_if()
hw/ide: Rename ide_init2() -> ide_bus_init_output_irq()
hw/ide: Rename ide_exec_cmd() -> ide_bus_exec_cmd()
hw/ide: Rename ide_register_restart_cb -> ide_bus_register_restart_cb
hw/ide: Rename ide_create_drive() -> ide_bus_create_drive()
hw/ide: Rename ide_set_irq() -> ide_bus_set_irq()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ioapic sources reside in hw/intc already. Move the headers there
as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213173033.98762-11-shentey@gmail.com>
[PMD: Keep ioapic_internal.h in hw/intc/, not under include/]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Remove dead code:
- unused fields in CPUTriCoreState
- (unexisting) tricore_def_t structure
- forward declaration of tricore_boot_info structure
(declared in "hw/tricore/tricore.h", used once in
hw/tricore/tricore_testboard.c).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230117184217.83305-1-philmd@linaro.org>
Under system emulation, xtensa_cpu_initfn() calls
memory_region_init_io(), itself declared in "exec/memory.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217172907.8364-10-philmd@linaro.org>
Commit caac44a52a ("target/sparc: Make sparc_cpu_tlb_fill sysemu
only") restricted mmu_helper.c to system emulation. Checking
whether CONFIG_USER_ONLY is defined is now pointless.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217172907.8364-9-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221217172907.8364-7-philmd@linaro.org>
When compiling for windows-arm64 using clang-15, it reports a sometimes
uninitialized variable. This seems to be a false positive, as a default
case guards switch expressions, preventing to return an uninitialized
value, but clang seems unhappy with assert(0) definition.
Change code to g_assert_not_reached() fix the warning.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230221153006.20300-5-pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The 'hwaddr' type is only available / meaningful on system emulation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217172907.8364-5-philmd@linaro.org>
Missed in 0093b9a5ee ("target/loongarch: Adjust functions
and structure to support user-mode") while cleaning commit
f84a2aacf5 ("target/loongarch: Add LoongArch IOCSR instruction").
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217172907.8364-4-philmd@linaro.org>
The cpu is used in both user and system emulation context while
sysbus.h is system-only. Remove it since it's not needed anyway.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221217172907.8364-3-philmd@linaro.org>
Likely out of sync: last update is from 2008
(commit d1412eb240), 12 years ago.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221217172907.8364-2-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221217173219.8715-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221217173219.8715-2-philmd@linaro.org>
x86_cpu_dump_local_apic_state() is called from monitor.c which
is only compiled for system emulation since commit bf95728400
("monitor: remove target-specific code from monitor.c").
Interestingly this stub was added few weeks later in commit
1f871d49e3 ("hmp: added local apic dump state") and was not
necessary by that time.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216220158.6317-5-philmd@linaro.org>
NEED_CPU_H is always defined for these target-specific headers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221216220158.6317-2-philmd@linaro.org>
The 'hwaddr' type is only available / meaningful on system emulation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-6-philmd@linaro.org>
The 'hwaddr' type is only available / meaningful on system emulation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-5-philmd@linaro.org>
The new CPU model mostly inherits features from Icelake-Server, while
adding new features:
- AMX (Advance Matrix eXtensions)
- Bus Lock Debug Exception
and new instructions:
- AVX VNNI (Vector Neural Network Instruction):
- VPDPBUS: Multiply and Add Unsigned and Signed Bytes
- VPDPBUSDS: Multiply and Add Unsigned and Signed Bytes with Saturation
- VPDPWSSD: Multiply and Add Signed Word Integers
- VPDPWSSDS: Multiply and Add Signed Integers with Saturation
- FP16: Replicates existing AVX512 computational SP (FP32) instructions
using FP16 instead of FP32 for ~2X performance gain
- SERIALIZE: Provide software with a simple way to force the processor to
complete all modifications, faster, allowed in all privilege levels and
not causing an unconditional VM exit
- TSX Suspend Load Address Tracking: Allows programmers to choose which
memory accesses do not need to be tracked in the TSX read set
- AVX512_BF16: Vector Neural Network Instructions supporting BFLOAT16
inputs and conversion instructions from IEEE single precision
- fast zero-length MOVSB (KVM doesn't support yet)
- fast short STOSB (KVM doesn't support yet)
- fast short CMPSB, SCASB (KVM doesn't support yet)
Features that may be added in future versions:
- CET (virtualization support hasn't been merged)
Signed-off-by: Wang, Lei <lei4.wang@intel.com>
Reviewed-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <20220812055751.14553-1-lei4.wang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are just a flag that documents the performance characteristic of
an instruction; it needs no hypervisor support. So include them even
if KVM does not show them. In particular, FZRM/FSRS/FSRC have only
been added very recently, but they are available on Sapphire Rapids
processors.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are three more markers for string operation optimizations.
They can all be added to TCG, whose string operations are more or
less as fast as they can be for short lengths.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fast short REP MOVS can be added to TCG, since a trivial translation
of string operation is a good option for short lengths.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When TCG is disabled this part of the code should not be reachable, so
wrap it with an ifdef for now.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function is needed by common code (ptw.c), so move it along with
the other regime_* functions in internal.h. When we enable the build
without TCG, the tlb_helper.c file will not be present.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The hflags are used only for TCG code, so introduce a new file
hflags.c to keep that code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is in preparation to moving the hflags code into its own file
under the tcg/ directory.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the target/arm/tcg directory. Its purpose is to hold the TCG
code that is selected by CONFIG_TCG.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The next few patches will move helpers under CONFIG_TCG. We'd prefer
to keep the debug helpers and debug registers close together, so
rearrange the file a bit to be able to wrap the helpers with a TCG
ifdef.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is in preparation for restricting compilation of some parts of
debug_helper.c to TCG only.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix memory corruption in the s390x dump code
* Various s390x TCG clean-ups
* s390x PV support for asynchronous teardown for reboot
* qemu-keymap related fixes
* Improvements for the duration of the gitlab-CI
* Deprecate the "-no-acpi" command line switch
-----BEGIN PGP SIGNATURE-----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=wDFZ
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-02-27' of https://gitlab.com/thuth/qemu into staging
* Simplify device casting in w/vfio/ccw.c
* Fix memory corruption in the s390x dump code
* Various s390x TCG clean-ups
* s390x PV support for asynchronous teardown for reboot
* qemu-keymap related fixes
* Improvements for the duration of the gitlab-CI
* Deprecate the "-no-acpi" command line switch
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmP8lVURHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWYkg//RTKsG0+HGMtnKvjTA5NzLIJrWAQfSPfh
# ABkxNHoscReae8LGquFfeTy9cN/uA051e/P06WfPXAkg3Uj72JKHHs/ncm5VhApY
# 7moOCIHlvFRAsy5TKYoInM+Yo0jov7vgKqqJcS3AL3hwhmvEwPwKr0cpZLNfKV8p
# GD+XM453g0AFn2jDFoXDsnHX3zco+7sd4dQN4olSrkd/gDel2UQ5JE4gJ/o6Qgys
# GW4vb+NpxQ6W3mSlU+ClTr03ZljPkascBS7tZO8Fwn+J3Wv4UTNLlM1JFXQhC3v8
# x9HpVpk4HW6C/hiPcsMpZRlXBb/HklkAhDxZ6tjTnQLRvbJ/o2uISJt+ZgeH9zeQ
# Ae4Ap7yPxsuGbx2twzbGoyEPAJj18hW7EUd6KromFqy877svmyRYs3NXQqSJOEmh
# Pv7VriUe6esyyVSXWjA6g2imo5pIhWxxRlsNVrrp8vOJNYT+ygBIFqu28ngwk86H
# jZOLqekEkQrNkwZZLuoxm8FyCAvzfMBeHQFlDnL4a3114dlC6X3/cJqCZ5htTaO+
# t7CL6QcepRh0NQPw1jRlUCARZK+WocjwwcmzgVzSKKzGpdg/EJC8Sg54l7wdVQCp
# jY3HEUWHHHmrqe3IefrzadRQhsB9xKcNdUaZmetRUm+ohgSc9S0cfpVXNwT+G3+M
# a47dp9ueI6Q=
# =wDFZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 27 Feb 2023 11:34:45 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-02-27' of https://gitlab.com/thuth/qemu: (33 commits)
Deprecate the "-no-acpi" command line switch
gitlab-ci.d/base: Mark jobs as interruptible by default
gitlab-ci.d: Build with --enable-fdt=system by default
gitlab-ci.d/buildtest-template: Simplify the configure step
gitlab-ci.d/buildtest: Disintegrate the build-coroutine-sigaltstack job
gitlab-ci.d/buildtest: Remove aarch64-softmmu from the build-system-ubuntu job
Updated the FSF address to <https://www.gnu.org/licenses/>
meson: fix dependency on qemu-keymap
qemu-keymap: Silence memory leak warning from Clang's sanitizer
configure: Add 'mkdir build' check
tests/tcg/s390x: Add sam.S
tests/tcg/s390x: Add bal.S
target/s390x: Use tcg_constant_* in translate_vx.c.inc
target/s390x: Use tcg_constant_i32 for fpinst_extract_m34
target/s390x: Use tcg_constant_* for DisasCompare
target/s390x: Use tcg_constant_* in local contexts
s390x/pv: Add support for asynchronous teardown for reboot
target/s390x: Hoist some computation in access_memmove
target/s390x: Inline do_access_{get,set}_byte
target/s390x: Remove TLB_NOTDIRTY workarounds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We did not correctly handle N >= operand size.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1374
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114233206.3118472-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In most cases, this is a simple local allocate and free
replaced by tcg_constant_*. In three cases, a variable
temp was initialized with a constant value -- reorg to
localize the constant. In gen_acc, this fixes a leak.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Return a constant or NULL, which means the free may be
removed from all callers of fpinst_extract_m34.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The a and b fields are not modified by the consumer,
and while we need not free a constant, tcg will quietly
ignore such frees, so free_compare need not be changed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230220184052.163465-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace tcg_const_* with tcg_constant_* in contexts
where the free to remove is nearby.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20230220184052.163465-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ensure that the total length is in a local variable
across the byte loop. Compute size1 difference once.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-8-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Inline into the parent functions with a simple test
to select the page, and a new define to remove ifdefs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-7-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When this code was written, it was using tlb_vaddr_to_host,
which does not handle TLB_DIRTY. Since then, it has been
converted to probe_access_flags, which does.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-6-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Assign to access struct immediately, rather than waiting
until the end of the function. This means we can pass
address of haddr struct members instead of allocating
extra space on the local stack.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-5-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The interface from probe_access_flags is void*, and matching
that will be helpful. We already rely on the gcc extension
for byte arithmetic on void*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-4-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Passing a pointer from the caller down to access_prepare_nf
eliminates a structure copy.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-3-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In db9aab5783 we broke the contract of s390_probe_access, in that it
no longer returned an exception code, nor set __excp_addr. Fix both.
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230109201856.3916639-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are not on a hot path here, so there is no real need for the logic
here with the split heap and stack space allocation. Simplify it by
always allocating memory from the heap.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230215085703.746788-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"note_size" can be smaller than sizeof(note), so unconditionally calling
memset(notep, 0, sizeof(note)) could cause a memory corruption here in
case notep has been allocated dynamically, thus let's use note_size as
length argument for memset() instead.
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Fixes: 113d8f4e95 ("s390x: pv: Add dump support")
Message-Id: <20230214141056.680969-1-thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* A triplet of cleanups to the kernel/initrd loader that avoids
duplication between the various boards.
* Weiwei Li, Daniel Henrique Barboza, and Liu Zhiwei have been added as
reviewers. Thanks for the help!
* A fix for PMP matching to avoid incorrectly appling the default
permissions on PMP permission violations.
* A cleanup to avoid an unnecessary avoid env_archcpu() in
cpu_get_tb_cpu_state().
* Fixes for the vector slide instructions to avoid truncating 64-bit
values (such as doubles) on 32-bit targets.
-----BEGIN PGP SIGNATURE-----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=Umli
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu into staging
Fourth RISC-V PR for QEMU 8.0, Attempt 2
* A triplet of cleanups to the kernel/initrd loader that avoids
duplication between the various boards.
* Weiwei Li, Daniel Henrique Barboza, and Liu Zhiwei have been added as
reviewers. Thanks for the help!
* A fix for PMP matching to avoid incorrectly appling the default
permissions on PMP permission violations.
* A cleanup to avoid an unnecessary avoid env_archcpu() in
cpu_get_tb_cpu_state().
* Fixes for the vector slide instructions to avoid truncating 64-bit
values (such as doubles) on 32-bit targets.
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmP5Br8THHBhbG1lckBk
# YWJiZWx0LmNvbQAKCRAuExnzX7sYiT4RD/9hdSlQlR1g/2h4fbCJ3U0GvyNH0T7N
# mt3AX8hFvmfR1O63qqVVebJSHM1dTm6WsA19vKE5tdtbjV5V8UZuBTSqYeRBSrLd
# LK9IHhwv3k9OQ/EG8CgRo7HEMxAurpC26zTf3chnfwa1Wyl5XxCXNx5hPbhu18G9
# oxw0sBi51T0Tb+N6lOVVSfmiEZWLXRq+lDCZdV0j864brsSjo4x8VEGrLaFTOJLf
# X4MW6vBI4Pcb7EGnHjj5WvRKsf8gdahdx8bSTjORIm8oGri9Iyw6Vrg2khuhjnuH
# 99sD1O06cvrylp+sCOVei8H3S6/xCepQXUXnCBCd1/cetgV+olo+ZR78Z8ZjXPED
# jhZ23lsDcge+4W141lsCiwLgzI0YO3Ac+84zQLIvcx16c8zow3G9FO9sTlBSsgnW
# 0XJrsUF7AZB6quUSMytG7WK+OBizzCRwj7ItC+Mty68wLrei5lDVj8b0t8hAQEdr
# dOb7jku+Dz8OspGZx1aDKKifGDO+Ppv4PjAM2G44OmkM824SvvFg8+FEr9NgbKbp
# VgTZDCeVC6IEpzthKsK8WeompLo7Sc33KITqwMbGiyGs+gsnmgKP2bcTLF8YTlFk
# dqFBWjo3tjH5oukgTLCSYY4xPaHR9q418vGAfRox15GtUVliQ9iL5oH47PVXg4U7
# YsNZ74nD1pUueg==
# =Umli
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Feb 2023 18:49:35 GMT
# gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
# Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889
* tag 'pull-riscv-to-apply-20230224' of github.com:palmer-dabbelt/qemu:
target/riscv: Fix vslide1up.vf and vslide1down.vf
target/riscv: avoid env_archcpu() in cpu_get_tb_cpu_state()
target/riscv: Smepmp: Skip applying default rules when address matches
MAINTAINERS: Add some RISC-V reviewers
target/riscv: Remove privileged spec version restriction for RVV
hw/riscv/boot.c: make riscv_load_initrd() static
hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()
hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vslide1up_##BITWIDTH is used by the vslide1up.vx and vslide1up.vf. So its
scalar input should be uint64_t to hold the 64 bits float register.And the
same for vslide1down_##BITWIDTH.
This bug is caught when run these instructions on qemu-riscv32.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-ID: <20230213094550.29621-1-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We have a RISCVCPU *cpu pointer available at the start of the function.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Message-ID: <20230210123836.506286-1-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When MSECCFG.MML is set, after checking the address range in PMP if the
asked permissions are not same as programmed in PMP, the default
permissions are applied. This should only be the case when there
is no matching address is found.
This patch skips applying default rules when matching address range
is found. It returns the index of the match PMP entry.
Fixes: 824cac681c (target/riscv: Fix PMP propagation for tlb)
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230209055206.229392-1-hchauhan@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The RVV specification does not require that the core needs to support
the privileged specification v1.12.0 to support RVV, and there is no
dependency from ISA level.
This commit removes the restriction from both RVV CSRs and extension CPU
ISA string.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230208063209.27279-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Mirroring the upstream gdb xml files, the two stack boundary
registers are separated out.
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before this commit, when GDB attached an OS working on QEMU, order of FPU
stack registers printed by GDB command 'info float' was wrong. There was a
bug causing the problem in 'g' packets sent by QEMU to GDB. The packets have
values of registers of machine emulated by QEMU containing FPU stack
registers. There are 2 ways to specify a x87 FPU stack register. The first
is specifying by absolute indexed register names (R0, ..., R7). The second
is specifying by stack top relative indexed register names (ST0, ..., ST7).
Values of the FPU stack registers should be located in 'g' packet and be
ordered by the relative index. But QEMU had located these registers ordered
by the absolute index. After this commit, when QEMU reads registers to make
a 'g' packet, QEMU specifies FPU stack registers by the relative index.
Then, the registers are ordered correctly in the packet. As a result, GDB,
the packet receiver, can print FPU stack registers in the correct order.
Signed-off-by: TaiseiIto <taisei1212@outlook.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <TY0PR0101MB4285923FBE9AD97CE832D95BA4E59@TY0PR0101MB4285.apcprd01.prod.exchangelabs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit cf7c6d1004 ("target/arm: Split out cpregs.h") we now have
a cpregs.h header which is more suitable for this code.
Code moved verbatim.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move this earlier to make the next patch diff cleaner. While here
update the comment slightly to not give the impression that the
misalignment affects only TCG.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
for "all" builds (tcg + kvm), we want to avoid doing
the psci check if tcg is built-in, but not enabled.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
make it clearer from the name that this is a tcg-only function.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While dozens of files include "cpu.h", only 3 files require
these NVIC helper declarations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-12-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no point in using a void pointer to access the NVIC.
Use the real type to avoid casting it while debugging.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-10-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-9-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Although the 'eabi' field is only used in user emulation where
CPU reset doesn't occur, it doesn't belong to the area to reset.
Move it after the 'end_reset_fields' for consistency.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230206223502.25122-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm_v7m_mmu_idx_all() and arm_v7m_mmu_idx_for_secstate_and_priv()
are only used for system emulation in m_helper.c.
Move the definitions to avoid prototype forward declarations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230206223502.25122-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Failure to truncate the inputs results in garbage for the carry-out.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1373
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230115012103.3131796-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When ADCX is followed by ADOX or vice versa, the second instruction's
carry comes from EFLAGS and the condition codes use the CC_OP_ADCOX
operation. Retrieving the carry from EFLAGS is handled by this bit
of gen_ADCOX:
tcg_gen_extract_tl(carry_in, cpu_cc_src,
ctz32(cc_op == CC_OP_ADCX ? CC_C : CC_O), 1);
Unfortunately, in this case cc_op has been overwritten by the previous
"if" statement to CC_OP_ADCOX. This works by chance when the first
instruction is ADCX; however, if the first instruction is ADOX,
ADCX will incorrectly take its carry from OF instead of CF.
Fix by moving the computation of the new cc_op at the end of the function.
The included exhaustive test case fails without this patch and passes
afterwards.
Because ADCX/ADOX need not be invoked through the VEX prefix, this
regression bisects to commit 16fc5726a6 ("target/i386: reimplement
0x0f 0x38, add AVX", 2022-10-18). However, the mistake happened a
little earlier, when BMI instructions were rewritten using the new
decoder framework.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1471
Reported-by: Paul Jolly <https://gitlab.com/myitcv>
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We forgot to set cc_src, which is used for computing C.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1370
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114180601.2993644-1-richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were two problems here: not limiting the input to operand bits,
and not correctly handling large extraction length.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1372
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230114230542.3116013-3-richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Fixes: 1d0b926150 ("target/i386: move scalar 0F 38 and 0F 3A instruction to new decoder", 2022-10-18)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
we were sign extending the result of the load, while the instruction
clearly states that the result should be unsigned.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-10-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
if cpu_gpr_d[r3] == 0 then we were shifting the lower register to the
right by 32 which is undefined behaviour. In this case the TriCore would
do nothing an just return the higher register cpu_reg_d[r1]. We fixed
that by detecting whether cpu_gpr_d[r3] was zero and cleared the lower
register.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-8-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
if we used const16 == 0 we would crash qemu with the error:
../tcg/tcg-op.c:196: tcg_gen_shri_i32: Assertion `arg2 >= 0 && arg2 < 32' failed
This whole instruction can be handled by 'tcg_gen_extract2_tl' which
takes care of this special case as well.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-6-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
we were mixing up the "c" and "d" registers. We used "d" as a
destination register und "c" as the source. According to the TriCore ISA
manual 1.6 vol 2 it is the other way round.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653
Message-Id: <20230202120432.1268-4-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
we were mixing up the "c" and "d" registers. We used "d" as a
destination register und "c" as the source. According to the TriCore ISA
manual 1.6 vol 2 it is the other way round.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653
Message-Id: <20230202120432.1268-2-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-15-armbru@redhat.com>
This commit was created with scripts/clean-includes.
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Changes to standalone programs dropped, because these intentionally
don't use qemu/osdep.h:
target/hexagon/gen_dectree_import.c
target/hexagon/gen_semantics.c
target/hexagon/idef-parser/idef-parser.h
target/hexagon/idef-parser/parser-helpers.c
target/hexagon/idef-parser/parser-helpers.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-14-armbru@redhat.com>
Character must be returned via ret[0] field (copied to a0 by KVM).
Return value should be set to 0 to indicate successful processing.
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230203135155.12449-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to spec, ctzw should work with 32-bit register, not 64.
For example, previous implementation returns 33 for (1<<33) input
when the new one returns 32.
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230204082312.43557-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
commit fb3f3730e4 added mechanism to generate virtual instruction
exception during instruction decode when virt is enabled.
However in some situations, illegal instruction exception can be raised
due to state of CPU. One such situation is implementing branch tracking.
[1] An indirect branch if doesn't land on a landing pad instruction, then
cpu must raise an illegal instruction exception.
Implementation would raise such expcetion due to missing landing pad inst
and not due to decode. Thus DisasContext must have `virt_inst_excp`
initialized to false during DisasContxt initialization for TB.
[1] - https://github.com/riscv/riscv-cfi
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230127191758.755844-1-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadFmv ISA extension.
The patch uses the T-Head specific decoder and translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-14-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the T-Head C906 to the list of known CPUs.
Selecting this CPUs will automatically enable the available
ISA extensions of the CPUs (incl. vendor extensions).
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-13-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are no differences for floating point instructions in priv version 1.11
and 1.12. There is also no dependency for Zfh to priv version 1.12.
Therefore allow Zfh to be enabled for priv version 1.11.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-12-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head FMemIdx instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-11-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MemIdx instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-10-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MemPair instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MAC instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-8-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadCondMov ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-7-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBs ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-6-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBb ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-5-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBa ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-4-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadSync ISA extension.
The patch uses the T-Head specific decoder and translation.
The implementation introduces a helper to execute synchronization tasks:
helper_tlb_flush_all() performs a synchronized TLB flush on all CPUs.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadCmo ISA extension.
To avoid interfering with standard extensions, decoder and translation
are in its own xthead* specific files.
Future patches should be able to easily add additional T-Head extension.
The implementation does not have much functionality (besides accepting
the instructions and not qualifying them as illegal instructions if
the hart executes in the required privilege level for the instruction),
as QEMU does not model CPU caches and instructions are documented
to not raise any exceptions.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230131202013.2541053-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to privileged spec, if [sm]tval is written with a nonzero
value when a breakpoint exception occurs, then [sm]tval will contain
the faulting virtual address. Set tval to hit address when breakpoint
exception is triggered by hardware watchpoint.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230131170955.752743-1-geomatsi@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should call decode_save_opc() for all relevant instructions which
can potentially generate a virtual instruction fault or a guest page
fault because generating transformed instruction upon guest page fault
expects opcode to be available. Without this, hypervisor will see
transformed instruction as zero in htinst CSR for guest MMIO emulation
which makes MMIO emulation in hypervisor slow and also breaks nested
virtualization.
Fixes: a9814e3e08 ("target/riscv: Minimize the calls to decode_save_opc")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-5-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The time CSR will wrap-around immediately after reaching UINT64_MAX
so we don't need to re-start QEMU timer when timecmp == UINT64_MAX
in riscv_timer_write_timecmp().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-4-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Instead of clearing mask in riscv_cpu_update_mip() for VSTIP, we
should call riscv_cpu_update_mip() with mask == 0 from timer_helper.c
for VSTIP.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp suppor")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The htimedelta[h] CSR has impact on the VS timer comparison so we
should call riscv_timer_write_timecmp() whenever htimedelta changes.
Fixes: 3ec0fe18a3 ("target/riscv: Add vstimecmp suppor")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
tcg: Add support for TCGv_i128 in cmpxchg.
tcg: Test CPUJumpCache in tb_jmp_cache_clear_page
tcg: Split out tcg_gen_nonatomic_cmpxchg_i{32,64}
tcg/aarch64: Fix patching of LDR in tb_target_set_jmp_target
target/arm: Use tcg_gen_atomic_cmpxchg_i128
target/i386: Use tcg_gen_atomic_cmpxchg_i128
target/i386: Use tcg_gen_nonatomic_cmpxchg_i{32,64}
target/s390x: Use tcg_gen_atomic_cmpxchg_i128
target/s390x: Use TCGv_i128 in passing and returning float128
target/s390x: Implement CC_OP_NZ in gen_op_calc_cc
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmPeiDYdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+hFQf+K1MkEK1wtpjnqrYD
4l36Uo3B7w8Yi6FxbCx9NP78dJNNTjTn0zqhtISRKSzI7TGUCGnmQs40iqYrRe5S
9x6LJgTJplI2dsANvtsTaWB5gNzhowPt5tlit+J6Q0POwvvwcBZAOumY8AYt1YP+
dMsjBLw6HFaqSCU5IERZrB4kBwl61VTkTAtHL2utSZpdsOYoc3y2hzbJ/w3kLK2u
YXnMvom+Gc1rvQTaSMgiPYFITyx/VtXDe+JQwNikpu7Na+RFjtu7cHmg/BtZFo6s
15AsAS8JlENKAunpJiX41UR7SxB8MdyQL5LyjVNWo5F7+YgQuuO1gqYKt6qUwd+A
oH2uBA==
=xjMy
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230204' of https://gitlab.com/rth7680/qemu into staging
tcg: Add support for TCGv_i128 in parameters and returns.
tcg: Add support for TCGv_i128 in cmpxchg.
tcg: Test CPUJumpCache in tb_jmp_cache_clear_page
tcg: Split out tcg_gen_nonatomic_cmpxchg_i{32,64}
tcg/aarch64: Fix patching of LDR in tb_target_set_jmp_target
target/arm: Use tcg_gen_atomic_cmpxchg_i128
target/i386: Use tcg_gen_atomic_cmpxchg_i128
target/i386: Use tcg_gen_nonatomic_cmpxchg_i{32,64}
target/s390x: Use tcg_gen_atomic_cmpxchg_i128
target/s390x: Use TCGv_i128 in passing and returning float128
target/s390x: Implement CC_OP_NZ in gen_op_calc_cc
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmPeiDYdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+hFQf+K1MkEK1wtpjnqrYD
# 4l36Uo3B7w8Yi6FxbCx9NP78dJNNTjTn0zqhtISRKSzI7TGUCGnmQs40iqYrRe5S
# 9x6LJgTJplI2dsANvtsTaWB5gNzhowPt5tlit+J6Q0POwvvwcBZAOumY8AYt1YP+
# dMsjBLw6HFaqSCU5IERZrB4kBwl61VTkTAtHL2utSZpdsOYoc3y2hzbJ/w3kLK2u
# YXnMvom+Gc1rvQTaSMgiPYFITyx/VtXDe+JQwNikpu7Na+RFjtu7cHmg/BtZFo6s
# 15AsAS8JlENKAunpJiX41UR7SxB8MdyQL5LyjVNWo5F7+YgQuuO1gqYKt6qUwd+A
# oH2uBA==
# =xjMy
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 04 Feb 2023 16:30:46 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20230204' of https://gitlab.com/rth7680/qemu: (40 commits)
tcg/aarch64: Fix patching of LDR in tb_target_set_jmp_target
target/i386: Inline cmpxchg16b
target/i386: Inline cmpxchg8b
target/i386: Split out gen_cmpxchg8b, gen_cmpxchg16b
target/s390x: Implement CC_OP_NZ in gen_op_calc_cc
target/s390x: Use tcg_gen_atomic_cmpxchg_i128 for CDSG
target/s390x: Use Int128 for passing float128
target/s390x: Use Int128 for returning float128
target/s390x: Copy wout_x1 to wout_x1_P
target/s390x: Use Int128 for return from TRE
target/s390x: Use Int128 for return from CKSM
target/s390x: Use Int128 for return from CLST
target/s390x: Use a single return for helper_divs64/u64
target/s390x: Use a single return for helper_divs32/u32
tests/tcg/s390x: Add cdsg.c
tests/tcg/s390x: Add long-double.c
tests/tcg/s390x: Add clst.c
tests/tcg/s390x: Add div.c
target/ppc: Use tcg_gen_atomic_cmpxchg_i128 for STQCX
target/arm: Use tcg_gen_atomic_cmpxchg_i128 for CASP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_gen_atomic_cmpxchg_i128 for the atomic case,
and tcg_gen_qemu_ld/st_i128 otherwise.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_gen_atomic_cmpxchg_i64 for the atomic case,
and tcg_gen_nonatomic_cmpxchg_i64 otherwise.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>