Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat' directive for the AArch64 backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function in order
to encode the slightly
different bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on aarch64-none-elf and aarch64-none-linux-gnu
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-29 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-29 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-aarch64.c (md_atof): Add encoding for the bfloat16 format.
* testsuite/gas/aarch64/bfloat16-directive-le.d: New test.
* testsuite/gas/aarch64/bfloat16-directive-be.d: New test.
* testsuite/gas/aarch64/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch implements the '.bfloat16' directive for the Arm backend.
The syntax for the directive is:
.bfloat16 <0-n numbers>
e.g.
.bfloat16 12.0
.bfloat16 0.123, 1.0, NaN, 5
This is implemented by utilizing the ieee_atof_detail function (included
in the previous patch) in order to encode the slightly different
bfloat16 format.
Added testcases to verify the correct encoding for various bfloat16
values (NaN, Infinity (+ & -), normals, subnormals etc...).
Cross compiled and tested on arm-none-eabi and arm-none-linux-gnueabihf
with no issues.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-10-21 Mihail Ionescu <mihail.ionescu@arm.com>
2019-10-21 Barnaby Wilks <barnaby.wilks@arm.com>
* config/tc-arm.c (md_atof): Add encoding for bfloat16
* testsuite/gas/arm/bfloat16-directive-le.d: New test.
* testsuite/gas/arm/bfloat16-directive-be.d: New test.
* testsuite/gas/arm/bfloat16-directive.s: New test.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces BFloat16 instructions to the arm backend.
The following BFloat16 instructions are added: vdot, vfma{l/t},
vmmla, vfmal{t/b}, vcvt, vcvt{t/b}.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_archs): Add armv8.6-a option.
(cpu_arch_ver): Add TAG_CPU_ARCH_V8 tag for Armv8.6-a.
* doc/c-arm.texi (-march): New armv8.6-a arch.
* config/tc-arm.c (arm_ext_bf16): New feature set.
(enum neon_el_type): Add NT_bfloat value.
(B_MNEM_vfmat, B_MNEM_vfmab): New bfloat16 encoder
helpers.
(BAD_BF16): New message.
(parse_neon_type): Add bf16 type specifier.
(enum neon_type_mask): Add N_BF16 type.
(type_chk_of_el_type): Account for NT_bfloat.
(el_type_of_type_chk): Account for N_BF16.
(neon_three_args): Split out from neon_three_same.
(neon_three_same): Part split out into neon_three_args.
(CVT_FLAVOUR_VAR): Add bf16_f32 cvt flavour.
(do_neon_cvt_1): Account for vcvt.bf16.f32.
(do_bfloat_vmla): New.
(do_mve_vfma): New function to deal with the mnemonic clash between the BF16
vfmat and the MVE vfma in a VPT block with a 't'rue condition.
(do_neon_cvttb_1): Account for vcvt{t,b}.bf16.f32.
(do_vdot): New
(do_vmmla): New
(insns): Add vdot and vmmla mnemonics.
(arm_extensions): Add "bf16" extension.
* doc/c-arm.texi: Document "bf16" extension.
* testsuite/gas/arm/attr-march-armv8_6-a.d: New test.
* testsuite/gas/arm/bfloat16-bad.d: New test.
* testsuite/gas/arm/bfloat16-bad.l: New test.
* testsuite/gas/arm/bfloat16-bad.s: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-2.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad-3.d: New test.
* testsuite/gas/arm/bfloat16-cmdline-bad.d: New test.
* testsuite/gas/arm/bfloat16-neon.s: New test.
* testsuite/gas/arm/bfloat16-non-neon.s: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.d: New test.
* testsuite/gas/arm/bfloat16-thumb-bad.l: New test.
* testsuite/gas/arm/bfloat16-thumb.d: New test.
* testsuite/gas/arm/bfloat16-vfp.d: New test.
* testsuite/gas/arm/bfloat16.d: New test.
* testsuite/gas/arm/bfloat16.s: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_V8_6A, ARM_AEXT2_V8_6A,
ARM_ARCH_V8_6A): New.
* opcode/arm.h (ARM_EXT2_BF16): New feature macro.
(ARM_AEXT2_V8_6A): Include above macro in definition.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (select_arm_features): Update bfd_march_arm_8 with
Armv8.6-A.
(coprocessor_opcodes): Add bfloat16 vcvt{t,b}.
(neon_opcodes): Add bfloat SIMD instructions.
(print_insn_coprocessor): Add new control character %b to print
condition code without checking cp_num.
(print_insn_neon): Account for BFloat16 instructions that have no
special top-byte handling.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the following BFloat16 instructions to the
aarch64 backend: bfdot, bfmmla, bfcvt, bfcvtnt, bfmlal[t/b],
bfcvtn2.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (vectype_to_qualifier): Special case the
S_2H operand qualifier.
* doc/c-aarch64.texi: Document bf16 and bf16mmla4 extensions.
* testsuite/gas/aarch64/bfloat16.d: New test.
* testsuite/gas/aarch64/bfloat16.s: New test.
* testsuite/gas/aarch64/illegal-bfloat16.d: New test.
* testsuite/gas/aarch64/illegal-bfloat16.l: New test.
* testsuite/gas/aarch64/illegal-bfloat16.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: New test.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BFLOAT16): New feature macros.
(AARCH64_ARCH_V8_6): Include BFloat16 feature macros.
(enum aarch64_opnd_qualifier): Introduce new operand qualifier
AARCH64_OPND_QLF_S_2H.
(enum aarch64_insn_class): Introduce new class "bfloat16".
(BFLOAT16_SVE_INSNC): New feature set for bfloat16
instructions to support the movprfx constraint.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
2019-11-07 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_ins_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-dis-2.c (aarch64_opcode_lookup_1,
aarch64_find_next_opcode): Account for new instructions.
* aarch64-dis.c (aarch64_ext_reglane): Use AARCH64_OPND_QLF_S_2H
in reglane special case.
* aarch64-opc.c (struct operand_qualifier_data): Add data for
new AARCH64_OPND_QLF_S_2H qualifier.
* aarch64-tbl.h (QL_BFDOT QL_BFDOT64, QL_BFDOT64I, QL_BFMMLA2,
QL_BFCVT64, QL_BFCVTN64, QL_BFCVTN2_64): New qualifiers.
(aarch64_feature_bfloat16, aarch64_feature_bfloat16_sve,
aarch64_feature_bfloat16_bfmmla4): New feature sets.
(BFLOAT_SVE, BFLOAT): New feature set macros.
(BFLOAT_SVE_INSN, BFLOAT_BFMMLA4_INSN, BFLOAT_INSN): New macros
to define BFloat16 instructions.
(aarch64_opcode_table): Define new instructions bfdot,
bfmmla, bfcvt, bfcvtnt, bfdot, bfdot, bfcvtn, bfmlal[b/t]
bfcvtn2, bfcvt.
Regression tested on aarch64-elf.
Is it ok for trunk?
Regards,
Mihail
As the comments (here: almost, in the opcode table: fully) correctly
state - all register operands except MONITOR's address one are fixed
at 32 bit size. Don't print 64-bit registers there.
Also adjust x86-64-suffix.d's name such that it wouldn't be identical to
x86-64-rep-suffix.d's, but instead resemble that of its sibling
x86-64-suffix-intel.d.
If the extension is not found in the context sensitive table, the legacy
tables are still checked as a fallback. This is particularly useful for
Armv8.1-M as it enables the use of '.arch_extension' with the 'mve' and
'mve.fp' extensions which are not part of the legacy table.
* config/tc-arm.c (selected_ctx_ext_table) New static variable.
(arm_parse_arch): Set context sensitive extension table based on the
chosen base architecture.
(s_arm_arch_extension): Change to lookup extensions in the new context
sensitive tables.
* gas/testsuite/gas/arm/mve-ext.s: New.
* gas/testsuite/gas/arm/mve-ext.d: New.
* gas/testsuite/gas/arm/mvefp-ext.s: New.
* gas/testsuite/gas/arm/mvefp-ext.d: New.
This is a shorthand for the immediate argument being 0, as described here:
https://developer.arm.com/docs/ddi0596/latest/base-instructions-alphabetic-order/ldraa-ldrab-load-register-with-pointer-authentication
This is because the instructions still have a use with an immediate
argument of 0, unlike loads without the PAC functionality. Currently,
the mnemonics are
LDRAA Xt, [Xn, #<simm10>]!
LDRAB Xt, [Xn, #<simm10>]!
After this patch they become
LDRAA Xt, [Xn {, #<simm10>}]!
LDRAB Xt, [Xn {, #<simm10>}]!
gas * config/tc-aarch64.c (parse_address_main): Accept the omission of
the immediate argument for ldraa and ldrab as a shorthand for the
immediate being 0.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.d: New test.
* testsuite/gas/aarch64/ldraa-ldrab-no-offset.s: New test.
* testsuite/gas/aarch64/illegal-ldraa.s: Modified to accept the
writeback form with no offset.
* testsuite/gas/aarch64/illegal-ldraa.s: Removed missing offset
error.
opcodes * aarch64-opc.c (print_immediate_offset_address): Don't print the
immediate for the writeback form of ldraa/ldrab if it is 0.
* aarch64-tbl.h: Updated the documentation for ADDR_SIMM10.
* aarch64-opc-2.c: Regenerated.
Prior to changing the logic in the assembler install tests to make sure
the present defaulting of operand sizes won't get broken. There are a
few anomalies pointed out by this:
- arithmetic insns (add, sub, etc) allow defaulting when their immediate
fits in (signed) 8 bits, but they fail to assemble with larger values,
- mov, other than arithmetic insns, doesn't allow any defaulting,
- movsx/movzx default to byte sources (in AT&T mode), and their special
casing needs to be adjusted first
- bt and friends allow defaulting, while shl and friends don't,
- ambiguous AVX and AVX512 insns don't allow defaulting.
This should ultimately all become consistent (perhaps with the exception
some of the SIMD insns); respective tests will be added to the test
cases here as the issues get addressed.
PR 25041
opcodes * avr-dis.c (avr_operand): Fix construction of address for lds/sts
instructions.
gas * testsuite/gas/avr/pr25041.s: New test.
* testsuite/gas/avr/pr25041.d: New test driver.
This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
First and foremost the EsSeg attribute was misplaced for CMPSD. Then
both it and MOVSD were lacking Dword on both of their operands.
Finally string insns with multiple operands and requiring use of ES:
had the wrong operand number reported in the diagnostic.
The fix for PR12848 introduced an off by one error in the mask, this corrected
the negative overflows but not the positive overflows. As a result the
conditional branch instructions accepted a too wide positive immediate which
resulted in it corrupting the instruction during encoding.
The relocation I believe has been incorrectly named, to be consistent with the
other relocations it should have been named BRANCH21 which is why the masks for
it are confusing.
I've replaced the masks with a function out_of_range_p which should make it
harder to make such mistakes.
The mask for BL/BLX on Armv6t+ is also wrong, the extended range is 25-bits
and so the mask should be checking for 24-bits for positive overflow.
gas/ChangeLog:
PR gas/24991
* config/tc-arm.c (out_of_range_p): New.
(md_apply_fix): Use it in BFD_RELOC_THUMB_PCREL_BRANCH9,
BFD_RELOC_THUMB_PCREL_BRANCH12, BFD_RELOC_THUMB_PCREL_BRANCH20,
BFD_RELOC_THUMB_PCREL_BRANCH23, BFD_RELOC_THUMB_PCREL_BRANCH25
* testsuite/gas/arm/pr24991.d: New test.
* testsuite/gas/arm/pr24991.l: New test.
* testsuite/gas/arm/pr24991.s: New test.
This patch modifies assembler to accept the equivalent sized floating
and signless datatypes for VLDR instruction but as alias for the unsigned version.
gas/ChangeLog:
2019-09-23 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (do_mve_vstr_vldr_RQ): Modify function to allow float
* and signless datatypes for few cases of VLDR instruction.
* testsuite/gas/arm/mve-vldr-bad-3.l: Modify.
* testsuite/gas/arm/mve-vldr-bad-3.s: Likewise.
* testsuite/gas/arm/mve-vstrldr-1.d: Likewise.
* testsuite/gas/arm/mve-vstrldr-1.s: Likewise.
Commit 21df382b91 ("x86: fold SReg{2,3}") went too far: Folding 64-bit
PUSH/POP templates into non-64-bit ones isn't correct, due to the
different operand widths, and hence suffixes permitted. Restore the
separate templates.
Add tests of PUSH/POP with q suffix and %fs/%gs operands to the
testsuite. While doing so also add PUSHF/POPF ones _without_ suffix.
This patch adds support for MVE VCTP instruction in assembler.
gas ChangeLog:
2019-09-10 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (M_MNEM_vctp): Add new Mnemonic.
(do_mve_vctp): Add function to encode VCTP instruction.
* testsuite/gas/arm/mve-vctp-bad.d: New test.
* testsuite/gas/arm/mve-vctp-bad.l: Likewise.
* testsuite/gas/arm/mve-vctp-bad.s: Likewise.
* testsuite/gas/arm/mve-vctp.d: Likewise.
* testsuite/gas/arm/mve-vctp.s: Likewise.
This patch make changes to the assembler to encode MVE VMOV instruction "a" same as "b".
a: VMOV<c><q> <Dd>, <Dm>
b: VMOV<c><q>.F64 <Dd>, <Dm>
gas/ChangeLog:
2019-08-30 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (do_neon_mov): Modify "if" statement.
* testsuite/gas/arm/mve-vmov-bad-3.d: New test.
* testsuite/gas/arm/mve-vmov-bad-3.l: Likewise.
* testsuite/gas/arm/mve-vmov-bad-3.s: Likewise.
gas * config/tc-arm.c (parse_neon_mov): Add check to accept vector
register to both the arguments in VMOV instruction.
* testsuite/gas/arm/mve-vmov-1.d: Modify.
* testsuite/gas/arm/mve-vmov-1.s: Likewise.
* testsuite/gas/arm/mve-vorr.d: Likewise.
opcodes * arm-dis.c (mve_opcodes): Add entry for MVE_VMOV_VEC_TO_VEC.
(is_mve_undefined): Add case for MVE_VMOV_VEC_TO_VEC.
(print_insn_mve): Add condition to check Qm==Qn of VORR instruction.
li is a pseudo instruction in RISC-V, it might expand to more than one
instructions if the immediate value can't fit addi or lui, but the
assembler will always using 4-byte instructions during expansion.
For example:
li a0, 0x12345001
will expand into
12345537 lui a0,0x12345
00150513 addi a0,a0,1
but addi could be compress into
0505 addi a0,a0,1
It because load_const use macro_build to emit instructions,
and macro_build call append_insn, and expect it will compress
it if possible, but the fact is append_insn never compress anything,
So this patch redirect the li expansion flow to normal instruction
emission flow via md_assemble, added md_assemblef as an wrapper for
that for easier emit instruction with printf-style argument to build
instruction.
gas/ChangeLog:
* tc-riscv.c (md_assemblef): New.
(load_const) Use md_assemblef instead of macro_build to emit
instructions.
* testsuite/gas/riscv/li32.d: New.
* testsuite/gas/riscv/li32.s: Ditto.
* testsuite/gas/riscv/li64.d: Ditto.
* testsuite/gas/riscv/li64.s: Ditto.
This patch adds support for following CPUs:
Cortex-M35P, Cortex-A77, Cortex-A76AE.
Related specifications can be found at https://developer.arm.com/ip-products/processors.
gas/ChangeLog:
* config/tc-arm.c: New entries for Cortex-M35P, Cortex-A77,
and Cortex-A76AE.
* doc/c-arm.texi: Document new processors.
* testsuite/gas/arm/cpu-cortex-a76ae.d: New test.
* testsuite/gas/arm/cpu-cortex-a77.d: New test.
* testsuite/gas/arm/cpu-cortex-m35p.d: New test.
bfd/ChangeLog:
* cpu-arm.c: New entries for Cortex-M35P, Cortex-A77, Cortex-A76AE.
* atof-generic.c (atof_generic): Do not ignore leading zeros if
they appear after a decimal point.
* testsuite/gas/all/float.s: Extend test to include a number with
a leading decimal point followed by several zeroes.
* testsuite/gas/i386/fp.s: Likewise.
* testsuite/gas/i386/fp.d: Update expected output.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 0.5
.float16 10.2, NaN, 452.09
The floats will always be encoded using the binary16 format as described in the
IEEE 754-2008 standard. There is no need to support Arm's alternative half-precision
format since AArch64 only supports the IEEE format.
gas * config/tc-aarch64.c: Add float16 directive and add "Hh" to
acceptable float characters.
* doc/c-aarch64.texi: Documentation for float16 directive.
* testsuite/gas/aarch64/float16-be.d: New test.
* testsuite/gas/aarch64/float16-le.d: New test.
* testsuite/gas/aarch64/float16.s: New test.
* NEWS: Add NEWS entry.
Related specifications can be found at
https://developer.arm.com/ip-products/processors.
gas * NEWS: Mention the Arm and AArch64 new processors.
* config/tc-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
* doc/c-aarch64.texi: Document new CPUs.
* testsuite/gas/aarch64/cpu-cortex-a34.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a76ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a77.d: New test.
* testsuite/gas/aarch64/nop-asm.s: New test.
bfd * cpu-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
gas/
* config/tc-mips.c (mips_move_labels): Retain ISA mode bit
when moving labels in text segments.
(mips_align): Indicate text mode when aligning labels in
text segments.
* gas/testsuite/gas/mips/insn-isa-mode.d: New test.
* gas/testsuite/gas/mips/insn-isa-mode.s: New test source.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
This is a change to the first published specifications [1][a] but since there is no hardware
out there that uses the old instructions we do not want to support the old variant.
This changes are done based on the latest published specifications [1][b].
[1] https://developer.arm.com/architectures/cpu-architecture/m-profile/docs/ddi0553/latest/armv81-m-architecture-reference-manual
[a] version bf
[b] version bh
gas * config/tc-arm.c (enum operand_parse_code): Add the entry OP_I48_I64.
(po_imm1_or_imm2_or_fail): Marco to check the immediate is either of
48 or 64.
(parse_operands): Add case OP_I48_I64.
(do_mve_scalar_shift1): Add function to encode the MVE shift
instructions with 4 arguments.
* testsuite/gas/arm/mve-shift-bad.l: Modify.
* testsuite/gas/arm/mve-shift-bad.s: Likewise.
* testsuite/gas/arm/mve-shift.d: Likewise.
* testsuite/gas/arm/mve-shift.s: Likewise.
opcodes * arm-dis.c (struct mopcode32 mve_opcodes): Modify the mask for
cases MVE_SQRSHRL and MVE_UQRSHLL.
(print_insn_mve): Add case for specifier 'k' to check
specific bit of the instruction.
Half precision floating point numbers will be encoded using the IEEE 754
half precision floating point format - 16 bits in total, 1 for sign, 5
for exponent and 10 bits of mantissa.
This patch implements the float16 directive for both the IEEE 754 format
and the Arm alternative format for the Arm backend.
The syntax of the directive is:
.float16 <0-n decimal numbers>
e.g.
.float16 12.0
.float16 0.23, 433.1, 0.06
The Arm alternative format is almost identical to the IEEE 754 format,
except that it doesn't encode for NaNs or Infinity (instead an exponent
of 0x1F represents a normalized number in the range 65536 to 131008).
The alternative format is documented in the reference manual:
https://static.docs.arm.com/ddi0487/db/DDI0487D_b_armv8_arm.pdf?_ga=2.72318806.49764181.1561632697-999473562.1560847439
Which format is used is controlled by the .float16_format <format>
directive, where if <format> = ieee, then use the IEEE 754
half-precision format else if <format> = alternative, then use the
Arm alternative format
Or the format can be set on the command line via the -mfp16-format
option that has a similar syntax. -mfp16-format=<ieee|alternative>.
This also fixes the format and it cannot be changed by any directives.
Once the format has been set (either by the command line option or a directive) it cannot be changed,
and any attempts to change it (i.e. with the float16_format directive) will result in a warning and the
line being ignored.
For ELF targets the appropriate EABI attribute will be written out at the end of assembling
if the format has been explicitly specified. If no format has been explicitly specified then no
EABI attributes will be written.
If the format is not explicitly specified then any float16 directives are encoding using the IEEE 754-2008
format by default until the format is fixed or changed with the float16_format directive.
gas * config/tc-arm.c (enum fp_16bit_format): Add enum to represent the 2 float16 encodings.
(md_atof): Set precision for float16 type.
(arm_is_largest_exponent_ok): Check for whether to encode with the IEEE or alternative
format.
(set_fp16_format): Parse a float16_format directive.
(arm_parse_fp16_opt): Parse the fp16-format command line option.
(aeabi_set_public_attributes): For ELF encode the FP16 format EABI attribute.
* config/tc-arm.h (TC_LARGEST_EXPONENT_IS_NORMAL): Macro that expands to
arm_is_largest_exponent_ok.
(arm_is_largest_exponent_ok): Add prototype for arm_is_largest_exponent_ok function.
* doc/c-arm.texi: Add documentation for .float16, .float16_format and -mfp16-format=
* testsuite/gas/arm/float16-bad.d: New test.
* testsuite/gas/arm/float16-bad.l: New test.
* testsuite/gas/arm/float16-bad.s: New test.
* testsuite/gas/arm/float16-be.d: New test.
* testsuite/gas/arm/float16-format-bad.d: New test.
* testsuite/gas/arm/float16-format-bad.l: New test.
* testsuite/gas/arm/float16-format-bad.s: New test.
* testsuite/gas/arm/float16-format-opt-bad.d: New test.
* testsuite/gas/arm/float16-format-opt-bad.l: New test.
* testsuite/gas/arm/float16-le.d: New test.
* testsuite/gas/arm/float16.s: New test.
* testsuite/gas/arm/float16-eabi-alternative-format.d: New test.
* testsuite/gas/arm/float16-eabi-ieee-format.d: New test.
* testsuite/gas/arm/float16-eabi-no-format.d: New test.
* testsuite/gas/arm/float16-eabi.s: New test.
* config/atof-ieee.c (H_PRECISION): Macro for precision of float16
type.
(atof_ieee): Set precision and exponent bits for encoding float16
types.
(gen_to_words): NaN and Infinity encoding for float16.
(ieee_md_atof): Set precision for encoding float16 type.
In order to be able to add/remove insns to/from the middle of these
tests, generalize the patterns for the symbol reference comments of RIP-
relative operands.
Previously GAS would accept .u32, .u16 and .u8 suffixes to the VQ(R)DMLAH and VQ(R)DMLASH
instructions, however the Armv8.1-M Mainline specification states that these functions only
have signed variations (.s32, .s16 and .s8 suffixes).
This is documented here:
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf?_ga=2.143079093.1892401233.1563295591-999473562.1560847439#page=1183
gas * config/tc-arm.c (do_mve_vqdmlah): Use N_S_32 macro.
(do_neon_qrdmlah): Use N_S_32 macro.
* testsuite/gas/arm/mve-vqdmlah-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlah-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlah.s: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlash-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: Remove unsigned instruction tests.
* testsuite/gas/arm/mve-vqdmlash.s: Remove unsigned instruction tests.
opcodes * arm-dis.c: Only accept signed variants of VQ(R)DMLAH and VQ(R)DMLASH
instructions.
New instruction are added, and some of them are overlapping. Update
disassembler to correctly recognize them. Introduce nps400 option.
opcodes/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (skip_this_opcode): Check also for 0x07 major opcodes,
and MPY class instructions.
(parse_option): Add nps400 option.
(print_arc_disassembler_options): Add nps400 info.
gas/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/nps400-6.d: Update test.
When SHF_GNU_MBIND was added in the SHF_LOOS to SHF_HIOS range, it
should have required ELFOSABI_GNU since these flags are already in use
by other OSes. HPUX SHF_HP_TLS in fact has the same value. That
means no place in binutils should test SHF_GNU_MBIND without first
checking OSABI, and SHF_GNU_MBIND should not be set without also
setting OSABI. At least, that's the ideal, but the patch accepts
SHF_GNU_MBIND on ELFOSABI_NONE object files since gas didn't always
set OSABI. However, to reinforce the fact that SHF_GNU_MBIND isn't
proper without a non-zero OSABI, readelf will display the flag as
LOOS+0 if OSABI isn't set.
The clash with SHF_HP_TLS means that hppa64-linux either has that flag
on .tbss sections or supports GNU_MBIND, not both. (hppa64-linux
users, if there are any, may have noticed that GNU ld since 2017
mysteriously aligned their .tbss sections to a 4k boundary. That was
one consequence of SHF_HP_TLS being blindly interpreted as
SHF_GNU_MBIND.) Since it seems that binutils, gdb, gcc, glibc, and
the linux kernel don't care about SHF_HP_TLS I took that flag out of
.tbss for hppa64-linux.
bfd/
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_mbind.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_mbind.
(get_program_header_size): Formatting. Only test SH_GNU_MBIND
when elf_gnu_osabi_mbind is set.
(_bfd_elf_map_sections_to_segments): Likewise.
(_bfd_elf_init_private_section_data): Likewise.
(_bfd_elf_final_write_processing): Update comment.
* elf64-hppa.c (elf64_hppa_special_sections): Move .tbss entry.
(elf_backend_special_sections): Define without .tbss for linux.
binutils/
* readelf.c (get_parisc_segment_type): Split off hpux entries..
(get_ia64_segment_type): ..and these..
(get_hpux_segment_type): ..to here.
(get_segment_type): Condition GNU_MBIND on osabi. Use
get_hpux_segment_type.
(get_symbol_binding): Do not print UNIQUE for ELFOSABI_NONE.
(get_symbol_type): Do not print IFUNC for ELFOSABI_NONE.
gas/
* config/obj-elf.c (obj_elf_change_section): Don't emit a fatal
error for non-SHF_ALLOC SHF_GNU_MBIND here.
(obj_elf_parse_section_letters): Return SHF_GNU_MBIND in new
gnu_attr param.
(obj_elf_section): Adjust obj_elf_parse_section_letters call.
Formatting. Set SHF_GNU_MBIND and elf_osabi from gnu_attr.
Emit normal error for non-SHF_ALLOC SHF_GNU_MBIND and wrong osabi.
(obj_elf_type): Set elf_osabi for ifunc.
* testsuite/gas/elf/section12a.d: xfail msp430 and hpux.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.l: Adjust expected error.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Condition
SHF_GNU_MBIND on osabi. Set output elf_gnu_osabi_mbind.
The instructions that this change apply to are:
VQDMLADH, VQRDMLADH, VQDMLSDH, VQRDMLSDH
The updated documentation is here: https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf
Fixed this by removing the check for this warning from GAS as well as opcodes.
Added testcases to test that the warning is not generated for the instructions that have a 32-bit element size
and the same source and destination operand. Also fixed tests that would previously check for this warning.
gas * config/tc-arm.c (do_mve_vqdmladh): Remove check for UNPREDICTABLE.
* testsuite/gas/arm/mve-vqdmladh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmladh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmladh.d: New tests.
* testsuite/gas/arm/mve-vqdmladh.s: New tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: Remove tests.
* testsuite/gas/arm/mve-vqdmlsdh.d: New tests.
* testsuite/gas/arm/mve-vqdmlsdh.s: New tests.
opcodes * arm-dis.c (is_mve_unpredictable): Stop marking some MVE
instructions as UNPREDICTABLE.
This patch changes the eBPF CPU description to prefer the register
names %r0 and %r6 instead of %a and %ctx when disassembling. This
matches better with the current practice, vs. cBPF.
It also updates the GAS tests in order to reflect this change.
Tested in a x86_64 host.
cpu/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (h-gpr): when disassembling, use %r0 and %r6 instead of
%a and %ctx.
opcodes/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerated.
gas/ChangeLog:
2019-07-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.d: Use %r6 instead of %ctx.
* testsuite/gas/bpf/lddw-be.d: Likewise.
* testsuite/gas/bpf/lddw.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
After some discussion, we've decided to rename the +bitperm feature
flag to +sve2-bitperm, so that it's consistent with the other SVE2
feature flags. The associated internal macros already used
"SVE2_BITPERM", so only the feature flag itself needs to change.
2019-07-19 Richard Sandiford <richard.sandiford@arm.com>
gas/
* doc/c-aarch64.texi: Remame the +bitperm extension to +sve2-bitperm.
* config/tc-aarch64.c (aarch64_features): Likewise.
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update accordingly.
* testsuite/gas/aarch64/illegal-sve2-sha3.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2-sm4.d: Likewise.
* testsuite/gas/aarch64/illegal-sve2.d: Likewise.
* testsuite/gas/aarch64/sve2.d: Likewise.
This little patch adds support to the eBPF port of GAS for a few data
directives. The names for the directives have been chosen to be
coherent with the suffixes used in eBPF instructions: b, h, w and dw
for 8, 16, 32 and 64-bit values respectively.
Documentation and tests included.
Tested in a x86_64 host.
gas/ChangeLog:
2019-07-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_pseudo_table): .half, .word and .dword.
* testsuite/gas/bpf/data.s: New file.
* testsuite/gas/bpf/data.d: Likewise.
* testsuite/gas/bpf/data-be.d: Likewise.
* testsuite/gas/bpf/bpf.exp: Run data and data-be.
* doc/c-bpf.texi (BPF Directives): New section.
They're the only exception to there generally being no mix of register
kinds possible in an insn operand template, and there being two bits per
operand for their representation is also quite wasteful, considering the
low number of uses. Fold both bits and deal with the little bit of
fallout.
Also take the liberty and drop dead code trying to set REX_B: No segment
register has RegRex set on it.
Additionally I was quite surprised that PUSH/POP with the permitted
segment registers is not covered by the test cases. Add the missing
pieces.
This patch fixes the eBPF CPU description in order to reflect the
right explicit arguments passed to the ldabs{b,h,w,dw} instructions,
updates the corresponding GAS tests, and updates the BPF section of
the GAS manual.
cpu/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlabs): New pmacro.
(dlind): Likewise.
opcodes/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
gas/ChangeLog:
2019-07-15 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: ldabs instructions do not take a `src'
register as an argument.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
* doc/c-bpf.texi (BPF Opcodes): Update to reflect the correct
explicit arguments to ldabs and ldind instructions.
The eBPF non-generic load instructions ldind{b,h,w,dw} and
ldabs{b,h,w,dw} do not take an explicit destination register as an
argument. Instead, they put the loaded value in %r0, implicitly.
This patch fixes the CPU BPF description to not expect a 'dst'
argument in these arguments, regenerates the corresponding files in
opcodes, and updates the impacted GAS tests.
Tested in a x86-64 host.
cpu/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (dlsi): ldabs and ldind instructions do not take an
explicit 'dst' argument.
opcodes/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
gas/ChangeLog:
2019-07-14 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/mem.s: Do not use explicit arguments for
ldabs and ldind instructions.
* testsuite/gas/bpf/mem.d: Updated accordingly.
* testsuite/gas/bpf/mem-be.d: Likewise.
git commit f2d4ba38f5 caused many failures for mips-sgi-irix targets,
and added a new test that failed for aarch64, nds32, and rl78.
The mips failures are due to BSF_OBJECT being set in many cases for
symbols by the mips .global/.globl directive. This patch removes that
code and instead sets BSF_OBJECT in a target frob_symbol function,
also moving the mips hacks in elf_frob_symbol to the new function.
Note that common symbols are handled fine in elf.c:swap_out_syms
without needing to set BSF_OBJECT, so that old code can disappear.
* config/obj-elf.c (elf_frob_symbol): Remove mips hacks.
* config/tc-mips.h (tc_frob_symbol): Define.
(mips_frob_symbol): Declare.
* config/tc-mips.c (s_mips_globl): Don't set BSF_OBJECT for irix.
(mips_frob_symbol): Fudge symbols for irix here.
* testsuite/gas/elf/type-2.e: Allow random target symbols.
From Kito Cheng <kito.cheng@sifive.com>
gas/ChangeLog
* doc/c-riscv.texi (Instruction Formats): Add r4 type.
* testsuite/gas/riscv/insn.d: Add testcase for r4 type.
* testsuite/gas/riscv/insn.s: Ditto.
* doc/c-riscv.texi (Instruction Formats): Add b and j type.
* testsuite/gas/riscv/insn.d: Add test case for b and j type.
* testsuite/gas/riscv/insn.s: Ditto.
* testsuite/gas/riscv/insn.s: Correct instruction type for load
and store.
* testsuite/gas/riscv/insn.d: Using regular expression to match
address.
* doc/c-riscv.texi (Instruction Formats): Fix encoding table for SB
type and fix typo.
opcode/ChangeLog
* riscv-opc.c (riscv_insn_types): Add r4 type.
* riscv-opc.c (riscv_insn_types): Add b and j type.
* opcodes/riscv-opc.c (riscv_insn_types): Remove incorrect
format for sb type and correct s type.
Recently a patch was submitted for a Xen Project test harness binary to
override the compiler specified @object to @func (see [1]). In a reply I
suggested we shouldn't make ourselves dependent on currently unspecified
behavior of gas here: It accumulates all requests, and then
bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes
certain flags over others.
Make the behavior predictable: Generally the last .type is what counts.
Exceptions are directives which set multiple bits (TLS, IFUNC, and
UNIQUE): Subsequent directives requesting just the more generic bit
(i.e. FUNC following IFUNC) won't clear the more specific one. Warn
about incompatible changes, except from/to STT_NOTYPE.
Also add a new target hook, which hppa wants to use right away afaict.
In the course of adding the warning I ran into two ld testsuite
failures. I can only assume that it was a copy-and-paste mistake that
lead to the same symbol having its type set twice.
[1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
For example, when provided with the (incorrect) instruction
st4 {v0.16b-v3.16b}[4],[x0]
currently assembler provides the following error message
"Error: comma expected between operands at operand 2 -- `st4 {v0.16b-v3.16b}[4],[x0]'".
This was due to the assembler consuming the {v0.16b-v3.16b} as the first operand leaving
[4],[x0] as what it believed to be the second operand.
The actual error is that the first operand should be of element type and not
vector type (as provided). The new diagnostic for this error is
"Error: expected element type rather than vector type at operand 1 -- `st4 {v0.16b-v3.16b}[4],[x0]'.
Added testcases to check for the correct diagnostic message as well as checking that
variations of the structural load/store by element instruction also generate the error
when they have the same problem.
* config/tc-aarch64.c (parse_operands): Add error check.
* testsuite/gas/aarch64/diagnostic.l: New test.
* testsuite/gas/aarch64/diagnostic.s: New test.
* testsuite/gas/aarch64/illegal.l: New tests.
* testsuite/gas/aarch64/illegal.s: New tests.
The entry for the FMOV alias of FCPY was missing C_SCAN_MOVPRFX.
(The entry for FCPY itself was OK.)
This was the only /m-predicated instruction I could see that was
missing the flag.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_SCAN_MOVPRFX for the
SVE FMOV alias of FCPY.
gas/
* testsuite/gas/aarch64/sve-movprfx_27.s,
* testsuite/gas/aarch64/sve-movprfx_27.d: New test.
SVE FCVTZS, FCVTZU, SCVTF and UCVTF need the same treatment as FCVT:
the register size used in a predicated MOVPRFX must be the wider of
the destination and source sizes.
Since I was adding a (supposedly) complete set of tests for converts,
it seemed more consistent to add a complete set of tests for shifts
as well, even though there's no bug to fix there.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode_table): Add C_MAX_ELEM flags
to SVE fcvtzs, fcvtzu, scvtf and ucvtf entries.
gas/
* testsuite/gas/aarch64/sve-movprfx_26.s: Also test FCVTZS, FCVTZU,
SCVTF, UCVTF, LSR and ASR.
* testsuite/gas/aarch64/sve-movprfx_26.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_26.l: Likewise.
One of the MOVPRFX tests has:
output register of preceding `movprfx' used as input at operand 3 -- `cpy z1.d,p1/m,x1'
But X1 and Z1 are not the same register, so the instruction is
actually OK.
2019-07-02 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-opc.c (verify_constraints): Skip GPRs when scanning the
registers in an instruction prefixed by MOVPRFX.
gas/
* testsuite/gas/aarch64/sve-movprfx_25.s: Allow CPY Z1.D.P1/M,X1
to be prefixed by MOVPRFX.
* testsuite/gas/aarch64/sve-movprfx_25.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_25.l: Likewise.
I had mistakenly given all variants of the new SVE2 instructions
pmull{t,b} a dependency on the feature +sve2-aes.
Only the variant specifying .Q -> .D sizes should have that
restriction.
This patch fixes that mistake and updates the testsuite to have extra
tests (matching the given set of tests per line in aarch64-tbl.h that
the rest of the SVE2 tests follow).
We also add a line in the documentation of the command line to clarify
how to enable `pmull{t,b}` of this larger size. This is needed because
all other instructions gated under the `sve2-aes` architecture extension
are marked in the instruction documentation by an `HaveSVE2AES` check
while pmull{t,b} is gated under the `HaveSVE2PMULL128` check.
Regtested targeting aarch64-linux.
gas/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: Update tests.
* testsuite/gas/aarch64/illegal-sve2.l: Update tests.
* doc/c-aarch64.texi: Add special note of pmull{t,b}
instructions under the sve2-aes architecture extension.
* testsuite/gas/aarch64/illegal-sve2.s: Add small size
pmull{t,b} instructions.
* testsuite/gas/aarch64/sve2.d: Add small size pmull{t,b}
disassembly.
* testsuite/gas/aarch64/sve2.s: Add small size pmull{t,b}
instructions.
include/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_insn_class): sve_size_013
renamed to sve_size_13.
opcodes/ChangeLog:
2019-07-01 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm.c (aarch64_encode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Use new
sve_size_13 icode to account for variant behaviour of
pmull{t,b}.
* aarch64-tbl.h (OP_SVE_VVV_HD_BS): Add new qualifier.
(OP_SVE_VVV_Q_D): Add new qualifier.
(OP_SVE_VVV_QHD_DBS): Remove now unused qualifier.
(struct aarch64_opcode): Split pmull{t,b} into those requiring
AES and those not.
It seems to be not uncommon for people to use AND or OR in this form for
just setting the status flags. TEST, which doesn't write to any
register other than EFLAGS, ought to be preferred. Make the change only
for -O2 and above though, at least for now.
When they're in the 0F opcode space, swapping their source operands may
allow switching from 3-byte to 2-byte VEX prefix encoding. Note that NaN
behavior precludes us doing so for many packed and scalar floating point
insns; such an optimization would need to be done by the compiler
instead in this case, when it knows that NaN-s have undefined behavior
anyway.
While for explicitly specified AVX/AVX2 insns the optimization (for now
at least) gets done only for -O2 and -Os, it is utilized by default in
SSE2AVX mode, as there we're re-writing the programmer's specified insns
anyway.
Rather than introducing a new attribute flag, the change re-uses one
which so far was meaningful only for EVEX-encoded insns.
As long as there's no write mask as well as no broadcast, and as long
as the scaled Disp8 wouldn't result in a shorter EVEX encoding, encode
VPAND{D,Q}, VPANDN{D,Q}, VPOR{D,Q}, and VPXOR{D,Q} acting on only the
lower 16 XMM/YMM registers using their VEX equivalents with -O1.
Also take the opportunity and avoid looping twice over all operands
when dealing with memory-with-displacement ones.
While the ISA extensions doc suggests them to be made available just
like the SDM does for the PCLMULQDQ ISA extension, these weren't added
when supposrt for the new extension was introduced.
Also make sure the 64-bit non-AVX512 test actually tests VEX encodings,
not EVEX ones.
For example, this code is invalid:
smc #0x6951
The code would previously check for and encode for up to 16 bit immediate values, however
this immediate should instead be only a 4 bit value
(as documented herehttps://static.docs.arm.com/ddi0406/c/DDI0406C_C_arm_architecture_reference_manual.pdf ).
Fixed this by adding range checks in the relevant areas and also removing code that would
encode more than the first 4 bits of the immediate (code that is now redundant, as any immediate operand
larger than 0xF would error now anyway).
gas * config/tc-arm.c (do_smc): Add range check for immediate operand.
(do_t_smc): Add range check for immediate operand. Remove
obsolete immediate encoding.
(md_apply_fix): Fix range check. Remove obsolete immediate encoding.
* testsuite/gas/arm/arch6zk.d: Fix test.
* testsuite/gas/arm/arch6zk.s: Fix test.
* testsuite/gas/arm/smc-bad.d: New test.
* testsuite/gas/arm/smc-bad.l: New test.
* testsuite/gas/arm/smc-bad.s: New test.
* testsuite/gas/arm/thumb32.d: Fix test.
* testsuite/gas/arm/thumb32.s: Fix test.
These encodings aren't valid in real and VM86 modes, but they are very
well usable in 16-bit protected mode.
A few adjustments in the disassembler tables are needed where Ev or Gv
were wrongly used. Additionally an adjustment is needed to avoid
printing "addr32" when that's already recognizable by the use of %eiz.
Furthermore the Iq operand template was wrong for XOP:0Ah encoding
insns: They're having a uniform 32-bit immediate. Drop Iq and introduce
Id instead.
Clone a few existing test cases to exercise assembler and disassembler.
Noticed by a customer while looking at a tangentially related problem. The
gas testsuite for xstormy16 has two scripts that have a typo on the first
line, they are missing the !. They also use shell syntax that doesn't work
on a system where /bin/sh is dash. So I fixed the typo, changed the shell
to bash, and made them executable, so that they now work when run directly
even if /bin/sh is dash.
gas/
* testsuite/gas/xstormy16/allinsn.sh: Change first line to
#!/bin/bash and make it executable.
* testsuite/gas/xstormy16/gcc.sh: Likewise.
When MTHC1 instruction is paired with MTC1 to write a value to a
64-bit FPR, the MTC1 must be executed first, because the semantic
definition of MTC1 is not aware that software will be using an MTHC1
to complete the operation, and sets the upper half of the 64-bit FPR
to an UNPREDICTABLE value[1].
Fix the order of MTHC1 and MTC1 instructions in LI macro expansion.
Modify the expansions to exploit moves from $zero directly by-passing
the use of $AT, where ever possible.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Wave Computing, Inc., Document
Number: MD00086, Revision 5.04, December 11, 2013, Section 3.2
"Alphabetical List of Instructions", pp. 217.
gas/
* config/tc-mips.c (macro) <M_LI>: Re-order MTHC1 with
respect to MTC1 and use $0 for either part where possible.
* testsuite/gas/mips/li-d.s: Add test cases for non-zero
words in double precision constants.
* testsuite/gas/mips/li-d.d: Update reference output.
* testsuite/gas/mips/micromips@isa-override-1.d: Likewise.
* testsuite/gas/mips/mips32r2@isa-override-1.d: Likewise.
* testsuite/gas/mips/mips64r2@isa-override-1.d: Likewise.
MOVNTI was wrongly assembled with a 66h prefix. Add IgnoreSize to
address this. It and the scalar to/from integer conversion insns also
were also wrongly using Ev / Gv, leading to 16-bit register names being
printed when 32-bit ones were meant.
Clone the 32-bit SSE2 test to cover both assembler and disassembler.
This patch corrects ppc rs_align_code handling to choose the alignment
nops based on the machine in force at the alignment directive rather
than the machine at the end of file.
* config/tc-ppc.h (ppc_nop_select): Declare.
(NOP_OPCODE): Define.
* config/tc-ppc.c (ppc_elf_end, ppc_xcoff_end): Zero ppc_cpu.
(ppc_nop_encoding_for_rs_align_code): New enum.
(ppc_nop_select): New function.
(ppc_handle_align): Don't use ppc_cpu here. Get nop type from frag.
* testsuite/gas/ppc/groupnop.d,
* testsuite/gas/ppc/groupnop.s: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
If VEX.vvvv and EVEX.vvvv are reserved, they must be all 1s, which are
all 0s in inverted form. Add check for unused VEX.vvvv and EVEX.vvvv
when disassembling VEX and EVEX instructions.
gas/
PR binutils/24626
* testsuite/gas/i386/disassem.s: Add tests for reserved VEX.vvvv
and EVEX.vvvv.
* testsuite/gas/i386/x86-64-disassem.s: Likewise.
* testsuite/gas/i386/disassem.d: Updated.
* testsuite/gas/i386/x86-64-disassem.d: Likewise.
opcodes/
PR binutils/24626
* i386-dis.c (print_insn): Check for unused VEX.vvvv and
EVEX.vvvv when disassembling VEX and EVEX instructions.
(OP_VEX): Set vex.register_specifier to 0 after readding
vex.register_specifier.
(OP_Vex_2src_1): Likewise.
(OP_Vex_2src_2): Likewise.
(OP_LWP_E): Likewise.
(OP_EX_Vex): Don't check vex.register_specifier.
(OP_XMM_Vex): Likewise.
This fixes a bug reported on the riscv.org sw-dev mailing list. This
rejects "lui x1,symbol", as a symbol should only be accepted here when
used inside %hi(). Without the fix, this gets assembled as "lui x1,0"
with no relocation which is clearly wrong.
gas/
* config/tc-riscv.c (riscv_ip) <'u'>: Move O_constant check inside if
statement. Delete O_symbol and O_constant check after if statement.
* testsuite/gas/riscv/auipc-parsing.s: Test lui with missing %hi.
* testsuite/gas/riscv/auipc-parsing.l: Update.
For AVX512 instructions with Disp8ShiftVL and Broadcast, we may need to
add CheckRegSize to check if broadcast matches the destination register
size.
gas/
PR gas/24625
* testsuite/gas/i386/inval-avx512f.s: Add tests for AVX512_BF16
instructions with invalid broadcast.
* testsuite/gas/i386/x86-64-inval-avx512f.s: Likewise.
* testsuite/gas/i386/inval-avx512f.l: Updated.
* testsuite/gas/i386/x86-64-inval-avx512f.l: Likewise.
opcodes/
PR gas/24625
* i386-opc.tbl: Add CheckRegSize to AVX512_BF16 instructions with
Disp8ShiftVL.
* i386-tbl.h: Regenerated.
Targets that lack ppc64 support were failing the new prefix-reloc
test. This patch adds some test infrastructure to deal with that, and
changes the powerpc gas usage info so that "-a64" is omitted when
unsupported.
I've been meaning to break up the usage message for a long time;
While doing so causes translators some work now, it should make it
easier next time a new powerpc option is added.
* config/tc-ppc.c (is_ppc64_target): New function.
(md_show_usage): Split up usage message. Don't show -a64 when
unsupported.
testsuite/gas/ppc/ppc.exp (supports_ppc64): New.
(prefix-reloc): Only run for ppc64.
Allow st_other values such as STO_AARCH64_VARIANT_PCS to be set for alias
symbols independently. This is needed for ifunc symbols which are
aliased to the resolver using .set and don't expect resolver attributes
to override the ifunc symbol attributes. This means .variant_pcs must be
added explicitly to aliases.
gas/ChangeLog:
* config/tc-aarch64.c (aarch64_elf_copy_symbol_attributes): Define.
* config/tc-aarch64.h (aarch64_elf_copy_symbol_attributes): Declare.
(OBJ_COPY_SYMBOL_ATTRIBUTES): Define.
* testsuite/gas/aarch64/symbol-variant_pcs-3.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-3.s: New test.
In ELF objects the specified symbol is marked with STO_AARCH64_VARIANT_PCS.
gas/ChangeLog:
* config/tc-aarch64.c (s_variant_pcs): New function.
* doc/c-aarch64.texi: Document .variant_pcs.
* testsuite/gas/aarch64/symbol-variant_pcs-1.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-1.s: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.d: New test.
* testsuite/gas/aarch64/symbol-variant_pcs-2.s: New test.
This patch adds initial 64-bit insn assembler/disassembler support.
The only instruction added is "pnop" along with the automatic aligning
of prefix instruction so they do not cross 64-byte boundaries.
include/
* dis-asm.h (WIDE_OUTPUT): Define.
* opcode/ppc.h (prefix_opcodes, prefix_num_opcodes): Declare.
(PPC_OPCODE_POWERXX, PPC_GET_PREFIX, PPC_GET_SUFFIX),
(PPC_PREFIX_P, PPC_PREFIX_SEG): Define.
opcodes/
* ppc-dis.c (ppc_opts): Add "future" entry.
(PREFIX_OPCD_SEGS): Define.
(prefix_opcd_indices): New array.
(disassemble_init_powerpc): Initialize prefix_opcd_indices.
(lookup_prefix): New function.
(print_insn_powerpc): Handle 64-bit prefix instructions.
* ppc-opc.c (PREFIX_OP, PREFIX_FORM, SUFFIX_MASK, PREFIX_MASK),
(PMRR, POWERXX): Define.
(prefix_opcodes): New instruction table.
(prefix_num_opcodes): New constant.
binutils/
* objdump.c (disassemble_bytes): Set WIDE_OUTPUT in flags.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Handle prefix_opcodes.
(struct insn_label_list): New.
(insn_labels, free_insn_labels): New variables.
(ppc_record_label, ppc_clear_labels, ppc_start_line_hook): New funcs.
(ppc_frob_label, ppc_new_dot_label): Move functions earlier in file
and call ppc_record_label.
(md_assemble): Handle 64-bit prefix instructions. Align labels
that are on the same line as a prefix instruction.
* config/tc-ppc.h (tc_frob_label, ppc_frob_label): Move to
later in the file.
(md_start_line_hook): Define.
(ppc_start_line_hook): Declare.
* testsuite/gas/ppc/prefix-align.d,
* testsuite/gas/ppc/prefix-align.s: New test.
* testsuite/gas/ppc/ppc.exp: Run new test.
This option (also implied by --traditional) causes '$' to introduce
literal hexadecimal constants, rather than the modern convention '0x'.
gas/
* config/tc-s12z.c (s12z_strtol): New function. (md_show_usage): Update.
(md_parse_option): new case OPTION_DOLLAR_HEX. (s12z_init_after_args):
(<global>): Use s12z_strtol instead of strtol.
* doc/c-s12z.texi (S12Z Options): Document new option -mdollar-hex.
* testsuite/gas/s12z/dollar-hex.d: New file.
* testsuite/gas/s12z/dollar-hex.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
This patch makes changes to the <spec_reg> operand for VMRS and VMSR
instructions as per the Armv8.1-M Mainline.
New <spec_reg> options to support are:
0b0010: FPSCR_nzcvqc, access to FPSCR condition and saturation flags.
0b1100: VPR, privileged only access to the VPR register.
0b1101: P0, access to VPR.P0 predicate fields
0b1110: FPCXT_NS, enables saving and restoring of Non-secure floating
point context.
0b1111: FPCXT_S, enables saving and restoring of Secure floating point
context
*** gas/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (parse_operands): Update case OP_RVC to
parse p0 and P0.
(do_vmrs): Add checks for valid operands with respect to
cpu and fpu options.
(do_vmsr): Likewise.
(reg_names): New reg_names for FPSCR_nzcvqc, VPR, FPCXT_NS
and FPCXT_S.
* testsuite/gas/arm/armv8_1-m-spec-reg.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg.s: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.d: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad1.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad2.l: New.
* testsuite/gas/arm/armv8_1-m-spec-reg-bad3.l: New.
* testsuite/gas/arm/vfp1xD.d: Updated to allow new valid values.
* testsuite/gas/arm/vfp1xD_t2.d: Likewise.
*** opcodes/ChangeLog ***
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (coprocessor_opcodes): New instructions for VMRS
and VMSR with the new operands.
This patch adds the following instructions which are part of the
Armv8.1-M Mainline:
CINC
CINV
CNEG
CSINC
CSINV
CSNEG
CSET
CSETM
CSEL
gas/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (TOGGLE_BIT): New.
(T16_32_TAB): New entries for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm and csel.
(operand_parse_code): New OP_RR_ZR.
(parse_operand): Handle case for OP_RR_ZR.
(do_t_cond): New.
(insns): New instructions for cinc, cinv, cneg, csinc,
csinv, csneg, cset, csetm, csel.
* testsuite/gas/arm/armv8_1-m-cond-bad.d: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.l: New test.
* testsuite/gas/arm/armv8_1-m-cond-bad.s: New test.
* testsuite/gas/arm/armv8_1-m-cond.d: New test.
* testsuite/gas/arm/armv8_1-m-cond.s: New test.
opcodes/ChangeLog:
2019-05-21 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (enum mve_instructions): New enum
for csinc, csinv, csneg, csel, cset, csetm, cinv, cinv
and cneg.
(mve_opcodes): New instructions as above.
(is_mve_encoding_conflict): Add cases for csinc, csinv,
csneg and csel.
(print_insn_mve): Accept new %<bitfield>c and %<bitfield>C.
The MIPS64R6 TRM requires that the source register for DAUI
not be r0.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 67-68.
gas/
* testsuite/gas/mips/r6-branch-constraints.s: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.s: this and add test
case for DAUI.
* testsuite/gas/mips/r6-branch-constraints.l: Rename to ...
* testsuite/gas/mips/r6-reg-constraints.l: this and add test
for DAUI.
* testsuite/gas/mips/mips.exp: Rename test from
r6-branch-constraints to r6-reg-constraints.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Change source register
constraint for DAUI.
gas/ChangeLog:
2019-05-21 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 24559
* config/tc-arm.c (move_or_literal_pool): Set size_req to 0
for MOVW replacement.
* testsuite/gas/arm/load-pseudo.s: New test input.
* testsuite/gas/arm/m0-load-pseudo.d: New test.
* testsuite/gas/arm/m23-load-pseudo.d: New test.
* testsuite/gas/arm/m33-load-pseudo.d: New test.
On IRIX 5, every global symbol that is not explicitly labelled as
being a function is assumed to be an object. There is no reason
why IRIX behaviour should extend to all MIPS targets, so limit this
to only IRIX targets.
gas/
PR 14798
* config/tc-mips.c (s_mips_globl): Only treat symbols that are
not explicitly labelled as BSF_OBJECTs for IRIX targets.
* testsuite/gas/mips/pr14798.s: New test source.
* testsuite/gas/mips/pr14798-irix.d: New test.
* testsuite/gas/mips/pr14798.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
PR 14798
* testsuite/binutils-all/readelf.ss-mips: Update reference output.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.
ld/
PR 14798
* testsuite/ld-mips-elf/reloc-6a.s: Specify .text section for
global code symbols.
* testsuite/ld-mips-elf/reloc-6b.s: Likewise.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* testsuite/gas/arm/mve-tailpredloop.d: New test.
* testsuite/gas/arm/mve-tailpredloop.s: New test.
* testsuite/gas/arm/mve-vabav.d: New test.
* testsuite/gas/arm/mve-vabav.s: New test.
* testsuite/gas/arm/mve-vabd.d: New test.
* testsuite/gas/arm/mve-vabd.s: New test.
* testsuite/gas/arm/mve-vabsneg.d: New test.
* testsuite/gas/arm/mve-vabsneg.s: New test.
* testsuite/gas/arm/mve-vadc.d: New test.
* testsuite/gas/arm/mve-vadc.s: New test.
* testsuite/gas/arm/mve-vaddlv.d: New test.
* testsuite/gas/arm/mve-vaddlv.s: New test.
* testsuite/gas/arm/mve-vaddsub.d: New test.
* testsuite/gas/arm/mve-vaddsub.s: New test.
* testsuite/gas/arm/mve-vaddv.d: New test.
* testsuite/gas/arm/mve-vaddv.s: New test.
* testsuite/gas/arm/mve-vand.d: New test.
* testsuite/gas/arm/mve-vand.s: New test.
* testsuite/gas/arm/mve-vbic.d: New test.
* testsuite/gas/arm/mve-vbic.s: New test.
* testsuite/gas/arm/mve-vbrsr.d: New test.
* testsuite/gas/arm/mve-vbrsr.s: New test.
* testsuite/gas/arm/mve-vcadd.d: New test.
* testsuite/gas/arm/mve-vcadd.s: New test.
* testsuite/gas/arm/mve-vcls.d: New test.
* testsuite/gas/arm/mve-vcls.s: New test.
* testsuite/gas/arm/mve-vclz.d: New test.
* testsuite/gas/arm/mve-vclz.s: New test.
* testsuite/gas/arm/mve-vcmla.d: New test.
* testsuite/gas/arm/mve-vcmla.s: New test.
* testsuite/gas/arm/mve-vcmp.d: New test.
* testsuite/gas/arm/mve-vcmp.s: New test.
* testsuite/gas/arm/mve-vcmul.d: New test.
* testsuite/gas/arm/mve-vcmul.s: New test.
* testsuite/gas/arm/mve-vcvt-1.d: New test.
* testsuite/gas/arm/mve-vcvt-1.s: New test.
* testsuite/gas/arm/mve-vcvt-2.d: New test.
* testsuite/gas/arm/mve-vcvt-2.s: New test.
* testsuite/gas/arm/mve-vcvt-3.d: New test.
* testsuite/gas/arm/mve-vcvt-3.s: New test.
* testsuite/gas/arm/mve-vcvt-4.d: New test.
* testsuite/gas/arm/mve-vcvt-4.s: New test.
* testsuite/gas/arm/mve-vddup.d: New test.
* testsuite/gas/arm/mve-vddup.s: New test.
* testsuite/gas/arm/mve-vdup.d: New test.
* testsuite/gas/arm/mve-vdup.s: New test.
* testsuite/gas/arm/mve-veor.d: New test.
* testsuite/gas/arm/mve-veor.s: New test.
* testsuite/gas/arm/mve-vfma-vfms.d: New test.
* testsuite/gas/arm/mve-vfma-vfms.s: New test.
* testsuite/gas/arm/mve-vfmas.d: New test.
* testsuite/gas/arm/mve-vfmas.s: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.d: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd.s: New test.
* testsuite/gas/arm/mve-vhcadd.d: New test.
* testsuite/gas/arm/mve-vhcadd.s: New test.
* testsuite/gas/arm/mve-vmax-vmin.d: New test.
* testsuite/gas/arm/mve-vmax-vmin.s: New test.
* testsuite/gas/arm/mve-vmaxa-vmina.d: New test.
* testsuite/gas/arm/mve-vmaxa-vmina.s: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm.d: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm.s: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma.s: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv.d: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv.s: New test.
* testsuite/gas/arm/mve-vmaxv-vminv.d: New test.
* testsuite/gas/arm/mve-vmaxv-vminv.s: New test.
* testsuite/gas/arm/mve-vmla.d: New test.
* testsuite/gas/arm/mve-vmla.s: New test.
* testsuite/gas/arm/mve-vmladav.d: New test.
* testsuite/gas/arm/mve-vmladav.s: New test.
* testsuite/gas/arm/mve-vmlaldav.d: New test.
* testsuite/gas/arm/mve-vmlaldav.s: New test.
* testsuite/gas/arm/mve-vmlalv.d: New test.
* testsuite/gas/arm/mve-vmlalv.s: New test.
* testsuite/gas/arm/mve-vmlas.d: New test.
* testsuite/gas/arm/mve-vmlas.s: New test.
* testsuite/gas/arm/mve-vmlav.d: New test.
* testsuite/gas/arm/mve-vmlav.s: New test.
* testsuite/gas/arm/mve-vmlsdav.d: New test.
* testsuite/gas/arm/mve-vmlsdav.s: New test.
* testsuite/gas/arm/mve-vmlsldav.d: New test.
* testsuite/gas/arm/mve-vmlsldav.s: New test.
* testsuite/gas/arm/mve-vmov-1.d: New test.
* testsuite/gas/arm/mve-vmov-1.s: New test.
* testsuite/gas/arm/mve-vmov-2.d: New test.
* testsuite/gas/arm/mve-vmov-2.s: New test.
* testsuite/gas/arm/mve-vmul.d: New test.
* testsuite/gas/arm/mve-vmul.s: New test.
* testsuite/gas/arm/mve-vmulh.d: New test.
* testsuite/gas/arm/mve-vmulh.s: New test.
* testsuite/gas/arm/mve-vmullbt.d: New test.
* testsuite/gas/arm/mve-vmullbt.s: New test.
* testsuite/gas/arm/mve-vmvn.d: New test.
* testsuite/gas/arm/mve-vmvn.s: New test.
* testsuite/gas/arm/mve-vorn.d: New test.
* testsuite/gas/arm/mve-vorn.s: New test.
* testsuite/gas/arm/mve-vorr.d: New test.
* testsuite/gas/arm/mve-vorr.s: New test.
* testsuite/gas/arm/mve-vpnot.d: New test.
* testsuite/gas/arm/mve-vpnot.s: New test.
* testsuite/gas/arm/mve-vpsel.d: New test.
* testsuite/gas/arm/mve-vpsel.s: New test.
* testsuite/gas/arm/mve-vpt.d: New test.
* testsuite/gas/arm/mve-vpt.s: New test.
* testsuite/gas/arm/mve-vqabsneg.s: New test.
* testsuite/gas/arm/mve-vqaddsub.d: New test.
* testsuite/gas/arm/mve-vqaddsub.s: New test.
* testsuite/gas/arm/mve-vqdmladh.d: New test.
* testsuite/gas/arm/mve-vqdmladh.s: New test.
* testsuite/gas/arm/mve-vqdmlah.d: New test.
* testsuite/gas/arm/mve-vqdmlah.s: New test.
* testsuite/gas/arm/mve-vqdmlash.d: New test.
* testsuite/gas/arm/mve-vqdmlash.s: New test.
* testsuite/gas/arm/mve-vqdmlsdh.d: New test.
* testsuite/gas/arm/mve-vqdmlsdh.s: New test.
* testsuite/gas/arm/mve-vqdmulh.d: New test.
* testsuite/gas/arm/mve-vqdmulh.s: New test.
* testsuite/gas/arm/mve-vqdmull.d: New test.
* testsuite/gas/arm/mve-vqdmull.s: New test.
* testsuite/gas/arm/mve-vqmovn.d: New test.
* testsuite/gas/arm/mve-vqmovn.s: New test.
* testsuite/gas/arm/mve-vqrshl.d: New test.
* testsuite/gas/arm/mve-vqrshl.s: New test.
* testsuite/gas/arm/mve-vqrshrn.d: New test.
* testsuite/gas/arm/mve-vqrshrn.s: New test.
* testsuite/gas/arm/mve-vqshl.d: New test.
* testsuite/gas/arm/mve-vqshl.s: New test.
* testsuite/gas/arm/mve-vrev.d: New test.
* testsuite/gas/arm/mve-vrev.s: New test.
* testsuite/gas/arm/mve-vrint.d: New test.
* testsuite/gas/arm/mve-vrint.s: New test.
* testsuite/gas/arm/mve-vrmlaldavh.d: New test.
* testsuite/gas/arm/mve-vrmlaldavh.s: New test.
* testsuite/gas/arm/mve-vrshl.d: New test.
* testsuite/gas/arm/mve-vrshl.s: New test.
* testsuite/gas/arm/mve-vsbc.d: New test.
* testsuite/gas/arm/mve-vsbc.s: New test.
* testsuite/gas/arm/mve-vshl.d: New test.
* testsuite/gas/arm/mve-vshl.s: New test.
* testsuite/gas/arm/mve-vshlc.d: New test.
* testsuite/gas/arm/mve-vshlc.s: New test.
* testsuite/gas/arm/mve-vshll.d: New test.
* testsuite/gas/arm/mve-vshll.s: New test.
* testsuite/gas/arm/mve-vshr.d: New test.
* testsuite/gas/arm/mve-vshr.s: New test.
* testsuite/gas/arm/mve-vshrn.d: New test.
* testsuite/gas/arm/mve-vshrn.s: New test.
* testsuite/gas/arm/mve-vsli.d: New test.
* testsuite/gas/arm/mve-vsli.s: New test.
* testsuite/gas/arm/mve-vsri.d: New test.
* testsuite/gas/arm/mve-vsri.s: New test.
* testsuite/gas/arm/mve-vstld.d: New test.
* testsuite/gas/arm/mve-vstld.s: New test.
* testsuite/gas/arm/mve-vstrldr-1.d: New test.
* testsuite/gas/arm/mve-vstrldr-1.s: New test.
* testsuite/gas/arm/mve-vstrldr-2.d: New test.
* testsuite/gas/arm/mve-vstrldr-2.s: New test.
* testsuite/gas/arm/mve-vstrldr-3.d: New test.
* testsuite/gas/arm/mve-vstrldr-3.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vshll): New encoding function.
(do_mve_vshlc): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vshlc-bad.d: New test.
* testsuite/gas/arm/mve-vshlc-bad.l: New test.
* testsuite/gas/arm/mve-vshlc-bad.s: New test.
* testsuite/gas/arm/mve-vshll-bad.d: New test.
* testsuite/gas/arm/mve-vshll-bad.l: New test.
* testsuite/gas/arm/mve-vshll-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vqmovnt, M_MNEM_vqmovnb,
M_MNEM_vqmovunt, M_MNEM_vqmovunb): New instruction encodings.
(do_mve_vqmovn): New encoding function.
(do_neon_rshl): Change to accepte MVE variants.
(insns): Change entries and add new for MVE mnemonics.
* testsuite/gas/arm/mve-vqmovn-bad.d: New test.
* testsuite/gas/arm/mve-vqmovn-bad.l: New test.
* testsuite/gas/arm/mve-vqmovn-bad.s: New test.
* testsuite/gas/arm/mve-vqrshl-bad.d: New test.
* testsuite/gas/arm/mve-vqrshl-bad.l: New test.
* testsuite/gas/arm/mve-vqrshl-bad.s: New test.
* testsuite/gas/arm/mve-vrshl-bad.d: New test.
* testsuite/gas/arm/mve-vrshl-bad.l: New test.
* testsuite/gas/arm/mve-vrshl-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(do_mve_vqdmull): New encoding function.
(insns): Add entry for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmull-bad.d: New test.
* testsuite/gas/arm/mve-vqdmull-bad.l: New test.
* testsuite/gas/arm/mve-vqdmull-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Handle new instructions.
(do_neon_qdmulh): Add support for MVE variants.
(do_neon_qrdmlah): Likewise.
(do_mve_vqdmlah): New encoding function.
(insns): Change entries and add new entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmulh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmulh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmulh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vqdmladh): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vqdmladh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmladh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmladh-bad.s: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.d: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.l: New test.
* testsuite/gas/arm/mve-vqdmlsdh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vpsel): New encoding function.
(do_mve_vpnot): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vpnot-bad.d: New test.
* testsuite/gas/arm/mve-vpnot-bad.l: New test.
* testsuite/gas/arm/mve-vpnot-bad.s: New test.
* testsuite/gas/arm/mve-vpsel-bad.d: New test.
* testsuite/gas/arm/mve-vpsel-bad.l: New test.
* testsuite/gas/arm/mve-vpsel-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmlas): New encoding function.
(do_mve_vmulh): Likewise.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vmlas-bad.d: New test.
* testsuite/gas/arm/mve-vmlas-bad.l: New test.
* testsuite/gas/arm/mve-vmlas-bad.s: New test.
* testsuite/gas/arm/mve-vmulh-bad.d: New test.
* testsuite/gas/arm/mve-vmulh-bad.l: New test.
* testsuite/gas/arm/mve-vmulh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Handle new instructions.
(do_neon_dyadic_i64_su): Accept MVE variants.
(neon_dyadic_misc): Likewise.
(do_neon_mac_maybe_scalar): Likewise.
(do_neon_mul): Likewise.
(insns): Change to accept MVE variants.
* testsuite/gas/arm/mve-vmla-bad.d: New test.
* testsuite/gas/arm/mve-vmla-bad.l: New test.
* testsuite/gas/arm/mve-vmla-bad.s: New test.
* testsuite/gas/arm/mve-vmul-bad-1.d: New test.
* testsuite/gas/arm/mve-vmul-bad-1.l: New test.
* testsuite/gas/arm/mve-vmul-bad-1.s: New test.
* testsuite/gas/arm/mve-vmul-bad-2.d: New test.
* testsuite/gas/arm/mve-vmul-bad-2.l: New test.
* testsuite/gas/arm/mve-vmul-bad-2.s: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.d: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.l: New test.
* testsuite/gas/arm/mve-vqaddsub-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vmlaldav, M_MNEM_vmlaldava,
M_MNEM_vmlaldavx, M_MNEM_vmlaldavax, M_MNEM_vmlsldav,
M_MNEM_vmlsldava, M_MNEM_vmlsldavx, M_MNEM_vmlsldavax,
M_MNEM_vrmlaldavhx, M_MNEM_vrmlaldavhax, M_MNEM_vrmlsldavh,
M_MNEM_vrmlsldavha, M_MNEM_vrmlsldavhx, M_MNEM_vrmlsldavhax): New
instruction encodings.
(NEON_SHAPE_DEF): New shape
(mve_encode_rrqq): New encoding helper function.
(do_mve_vmlaldav): New encoding function.
(do_mve_vrmlaldavh): New encoding function.
(insns): Add entries for MVE mnemonics.
* testsuite/gas/arm/mve-vmlaldav-bad.d: New test.
* testsuite/gas/arm/mve-vmlaldav-bad.l: New test.
* testsuite/gas/arm/mve-vmlaldav-bad.s: New test.
* testsuite/gas/arm/mve-vmlalv-bad.d: New test.
* testsuite/gas/arm/mve-vmlalv-bad.l: New test.
* testsuite/gas/arm/mve-vmlalv-bad.s: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.d: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.l: New test.
* testsuite/gas/arm/mve-vmlsldav-bad.s: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.d: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.l: New test.
* testsuite/gas/arm/mve-vrmlaldavh-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vmaxv, M_MNEM_vmaxav, M_MNEM_vminv,
M_MNEM_vminav): New instruction encodings.
(do_mve_vmaxv): New encoding function.
(insns): Add entries for new MVE mnemonics.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.d: New test.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.l: New test.
* testsuite/gas/arm/mve-vmaxv-vminv-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmaxnmv): New encoding function.
(insns): Add entries for new mnemonics.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnmv-vminnmv-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vmaxa_vmina): New encoding function.
(do_mve_vmaxnma_vminnma): Likewise.
(do_neon_dyadic_if_su): Change to support MVE variants.
(do_vmaxnm): Likewise.
(insns): Change to accept MVE variants and add new.
* testsuite/gas/arm/mve-vmax-vmin-bad.d: New test.
* testsuite/gas/arm/mve-vmax-vmin-bad.l: New test.
* testsuite/gas/arm/mve-vmax-vmin-bad.s: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.d: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.l: New test.
* testsuite/gas/arm/mve-vmaxa-vmina-bad.s: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnm-vminnm-bad.s: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.d: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.l: New test.
* testsuite/gas/arm/mve-vmaxnma-vminnma-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operand.
(parse_operands): Handle new operand.
(mve_encode_qqr): Change to support new instructions.
(enum vfp_or_neon_is_neon_bits): Moved.
(vfp_or_neon_is_neon): Moved.
(check_simd_pred_availability): Moved.
(do_neon_dyadic_i_su): Changed to support MVE variants.
(neon_dyadic_misc): Changed mve_encode_qqr call.
(do_mve_vbrsr): Likewise.
(do_mve_vhcadd): New encoding function.
(insns): Change existing to accept MVE variants and add new.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.d: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.l: New test.
* testsuite/gas/arm/mve-vhadd-vhsub-vrhadd-bad.s: New test.
* testsuite/gas/arm/mve-vhcadd-bad.d: New test.
* testsuite/gas/arm/mve-vhcadd-bad.l: New test.
* testsuite/gas/arm/mve-vhcadd-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_fmac): Change to support MVE variants.
(insns): Change to accept MVE variants.
* testsuite/gas/arm/mve-vfma-vfms-bad.d: New test.
* testsuite/gas/arm/mve-vfma-vfms-bad.l: New test.
* testsuite/gas/arm/mve-vfma-vfms-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vddup, M_MNEM_vdwdup, M_MNEM_vidup,
M_MNEM_viwdup): New instruction encodings.
(NEON_SHAPE_DEF): New shapes.
(do_mve_viddup): New encoding function.
(do_neon_dup): Change to support new MVE variants.
(insns): Change existing to accept MVE variants and add new.
* testsuite/gas/arm/mve-vddup-bad.d: New test.
* testsuite/gas/arm/mve-vddup-bad.l: New test.
* testsuite/gas/arm/mve-vddup-bad.s: New test.
* testsuite/gas/arm/mve-vdup-bad.d: New test.
* testsuite/gas/arm/mve-vdup-bad.l: New test.
* testsuite/gas/arm/mve-vdup-bad.s: New test.
* testsuite/gas/arm/mve-vidup-bad.d: New test.
* testsuite/gas/arm/mve-vidup-bad.l: New test.
* testsuite/gas/arm/mve-vidup-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_mve_vfmas): New encoding function.
(do_neon_cls): Change to support MVE variants.
(do_neon_clz): Change to support MVE variants.
(insns): Change to support MVE variants and add new.
* testsuite/gas/arm/mve-vcls-bad.d: New test.
* testsuite/gas/arm/mve-vcls-bad.l: New test.
* testsuite/gas/arm/mve-vcls-bad.s: New test.
* testsuite/gas/arm/mve-vclz-bad.d: New test.
* testsuite/gas/arm/mve-vclz-bad.l: New test.
* testsuite/gas/arm/mve-vclz-bad.s: New test.
* testsuite/gas/arm/mve-vfmas-bad.d: New test.
* testsuite/gas/arm/mve-vfmas-bad.l: New test.
* testsuite/gas/arm/mve-vfmas-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operands.
(parse_operands): Handle new operands.
(do_mve_vcmul): New encoding function.
(do_vcmla): Change to support MVE variants.
(do_vcadd): Change to support MVE variants.
(insns): Change existing to support MVE variants and add new.
* testsuite/gas/arm/mve-vcadd-bad-1.d: New test.
* testsuite/gas/arm/mve-vcadd-bad-1.l: New test.
* testsuite/gas/arm/mve-vcadd-bad-1.s: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.d: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.l: New test.
* testsuite/gas/arm/mve-vcadd-bad-2.s: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmla-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmla-bad-2.s: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmul-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmul-bad-2.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): New operands.
(parse_operands): Handle new operands.
(enum vfp_or_neon_is_neon_bits): Moved
(vfp_or_neon_is_neon): Moved
(check_simd_pred_availability): Moved.
(do_neon_logic): Change to accept MVE variants.
(insns): Changed to accept MVE variants.
* testsuite/gas/arm/mve-vand-bad.d: New test.
* testsuite/gas/arm/mve-vand-bad.l: New test.
* testsuite/gas/arm/mve-vand-bad.s: New test.
* testsuite/gas/arm/mve-vbic-bad.d: New test.
* testsuite/gas/arm/mve-vbic-bad.l: New test.
* testsuite/gas/arm/mve-vbic-bad.s: New test.
* testsuite/gas/arm/mve-veor-bad.d: New test.
* testsuite/gas/arm/mve-veor-bad.l: New test.
* testsuite/gas/arm/mve-veor-bad.s: New test.
* testsuite/gas/arm/mve-vorn-bad.d: New test.
* testsuite/gas/arm/mve-vorn-bad.l: New test.
* testsuite/gas/arm/mve-vorn-bad.s: New test.
* testsuite/gas/arm/mve-vorr-bad.d: New test.
* testsuite/gas/arm/mve-vorr-bad.l: New test.
* testsuite/gas/arm/mve-vorr-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vaddlv, M_MNEM_vaddlva, M_MNEM_vaddv,
M_MNEM_vaddva): New instruction encodings.
(mve_encode_rq): New encoding helper function.
(do_mve_vaddlv): New encoding function.
(do_mve_vaddv): New encoding function.
* testsuite/gas/arm/mve-vaddlv-bad.d: New test.
* testsuite/gas/arm/mve-vaddlv-bad.l: New test.
* testsuite/gas/arm/mve-vaddlv-bad.s: New test.
* testsuite/gas/arm/mve-vaddv-bad.d: New test.
* testsuite/gas/arm/mve-vaddv-bad.l: New test.
* testsuite/gas/arm/mve-vaddv-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (M_MNEM_vadc, M_MNEM_vadci, M_MNEM_vbrsr):
New instruction encodings.
(do_mve_vadc): New encoding instruction.
(do_mve_vbrsr): Likewise.
(do_mve_vsbc): Likewise.
* testsuite/gas/arm/mve-vadc-bad.d: New test.
* testsuite/gas/arm/mve-vadc-bad.l: New test.
* testsuite/gas/arm/mve-vadc-bad.s: New test.
* testsuite/gas/arm/mve-vbrsr-bad.d: New test.
* testsuite/gas/arm/mve-vbrsr-bad.l: New test.
* testsuite/gas/arm/mve-vbrsr-bad.s: New test.
* testsuite/gas/arm/mve-vsbc-bad.d: New test.
* testsuite/gas/arm/mve-vsbc-bad.l: New test.
* testsuite/gas/arm/mve-vsbc-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (MVE_BAD_QREG): New error message.
(enum operand_parse_code): Define new operand.
(parse_operands): Handle new operand.
(do_mve_vpt): Change for VPT blocks.
(NEON_SHAPE_DEF): New shape.
(neon_logbits): Moved.
(LOW4): Moved
(HI1): Moved
(mve_get_vcmp_vpt_cond): New function to translate vpt conditions.
(do_mve_vcmp): New encoding function.
(do_vfp_nsyn_cmp): Changed to support MVE variants.
(insns): Change to support MVE variants of vcmp and add vpt.
* testsuite/gas/arm/mve-vcmp-bad-1.d: New test.
* testsuite/gas/arm/mve-vcmp-bad-1.l: New test.
* testsuite/gas/arm/mve-vcmp-bad-1.s: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.d: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.l: New test.
* testsuite/gas/arm/mve-vcmp-bad-2.s: New test.
* testsuite/gas/arm/mve-vpt-bad-1.d: New test.
* testsuite/gas/arm/mve-vpt-bad-1.l: New test.
* testsuite/gas/arm/mve-vpt-bad-1.s: New test.
* testsuite/gas/arm/mve-vpt-bad-2.d: New test.
* testsuite/gas/arm/mve-vpt-bad-2.l: New test.
* testsuite/gas/arm/mve-vpt-bad-2.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct arm_it): Expand isscalar field to be able to
distinguish between types of scalar.
(parse_typed_reg_or_scalar): Change to accept MVE scalar variants.
(parse_scalar): Likewise.
(parse_neon_mov): Accept MVE variant.
(po_scalar_or_goto): Make use reg_type.
(parse_operands): Change uses of po_scalar_or_goto.
(do_vfp_sp_monadic): Change to accept MVE variants.
(do_vfp_reg_from_sp): Likewise.
(do_vfp_sp_from_reg): Likewise.
(do_vfp_dp_rd_rm): Likewise.
(do_vfp_dp_rd_rn_rm): Likewise.
(do_vfp_dp_rm_rd_rn): Likewise.
(M_MNEM_vmovlt, M_MNEM_vmovlb, M_MNEM_vmovnt, M_MNEM_vmovnb): New
instruction encodings.
(NEON_SHAPE_DEF): New shape.
(do_mve_mov): New encoding fuction.
(do_mve_movn): Likewise.
(do_mve_movl): Likewise.
(do_neon_mov): Change to accept MVE variants.
(mcCE): New MACRO.
(insns): Accept new MVE variants and instructions.
* testsuite/gas/arm/mve-vmov-bad-1.d: New test.
* testsuite/gas/arm/mve-vmov-bad-1.l: New test.
* testsuite/gas/arm/mve-vmov-bad-1.s: New test.
* testsuite/gas/arm/mve-vmov-bad-2.d: New test.
* testsuite/gas/arm/mve-vmov-bad-2.l: New test.
* testsuite/gas/arm/mve-vmov-bad-2.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (enum operand_parse_code): Add new operand.
(parse_operands): Handle new operand.
(do_neon_cvt_1): Handle MVE variants.
(do_neon_cvttb_1): Likewise.
(insns): Accept MVE variants.
* testsuite/gas/arm/mve-vcvt-bad-1.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-1.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-1.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-2.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-3.s: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.d: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.l: New test.
* testsuite/gas/arm/mve-vcvt-bad-4.s: New test.
* testsuite/gas/arm/mve-vcvt-bad.d: New test.
* testsuite/gas/arm/mve-vcvt-bad.l: New test.
* testsuite/gas/arm/mve-vcvt-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct arm_it): Make immisreg field larger to hold
type of register.
(enum shift_kind): Add SHIFT_UXTW shift kind.
(enum parse_shift_mode): Add SHIFT_UXTW_IMMEDIATE shift mode.
(parse_shift): Handle new shift type.
(parse_address_main): Accept new addressing modes.
(M_MNEM_vstrb, M_MNEM_vstrh, M_MNEM_vstrw, M_MNEM_vstrd,
M_MNEM_vldrb, M_MNEM_vldrh, M_MNEM_vldrw, M_MNEM_vldrd): New
instruction encodings.
(do_mve_vstr_vldr_QI): New encoding functions.
(do_mve_vstr_vldr_RQ): Likewise.
(do_mve_vstr_vldr_RI): Likewise.
(do_mve_vstr_vldr): Likewise.
* testsuite/gas/arm/mve-vldr-bad-1.d: New test.
* testsuite/gas/arm/mve-vldr-bad-1.l: New test.
* testsuite/gas/arm/mve-vldr-bad-1.s: New test.
* testsuite/gas/arm/mve-vldr-bad-2.d: New test.
* testsuite/gas/arm/mve-vldr-bad-2.l: New test.
* testsuite/gas/arm/mve-vldr-bad-2.s: New test.
* testsuite/gas/arm/mve-vldr-bad-3.d: New test.
* testsuite/gas/arm/mve-vldr-bad-3.l: New test.
* testsuite/gas/arm/mve-vldr-bad-3.s: New test.
* testsuite/gas/arm/mve-vstr-bad-1.d: New test.
* testsuite/gas/arm/mve-vstr-bad-1.l: New test.
* testsuite/gas/arm/mve-vstr-bad-1.s: New test.
* testsuite/gas/arm/mve-vstr-bad-2.d: New test.
* testsuite/gas/arm/mve-vstr-bad-2.l: New test.
* testsuite/gas/arm/mve-vstr-bad-2.s: New test.
* testsuite/gas/arm/mve-vstr-bad-3.d: New test.
* testsuite/gas/arm/mve-vstr-bad-3.l: New test.
* testsuite/gas/arm/mve-vstr-bad-3.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (BAD_MVE_AUTO): New error message.
(BAD_MVE_SRCDEST): Likewise.
(mark_feature_used): Diagnose MVE only instructions when in
auto-detection mode or -march=all.
(enum operand_parse_code): Define new operand.
(parse_operands): Handle new operand.
(M_MNEM_vmullt, M_MNEM_vmullb): New encodings.
(mve_encode_qqq): New encoding helper function.
(do_mve_vmull): New encoding function.
(insns): Handle new instructions.
* testsuite/gas/arm/mve-vmullbt-bad.d: New test.
* testsuite/gas/arm/mve-vmullbt-bad.l: New test.
* testsuite/gas/arm/mve-vmullbt-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (struct asm_opcode): Make avalue a full int.
(BAD_ODD, BAD_EVEN, BAD_SIMD_TYPE): New errors.
(enum operand_parse_code): Handle new operands.
(parse_operands): Likewise.
(M_MNEM_vabav, M_MNEM_vmladav, M_MNEM_vmladava, M_MNEM_vmladavx,
M_MNEM_vmladavax, M_MNEM_vmlsdav, M_MNEM_vmlsdava, M_MNEM_vmlsdavx,
M_MNEM_vmlsdavax): Define new encodings.
(NEON_SHAPE_DEF): Add new shape.
(neon_check_type): Use BAD_SIMD_TYPE.
(mve_encode_rqq): New encoding helper function.
(do_mve_vabav, do_mve_vmladav): New encoding functions.
(mCEF): New MACRO.
* testsuite/gas/arm/mve-vabav-bad.d: New test.
* testsuite/gas/arm/mve-vabav-bad.l: New test.
* testsuite/gas/arm/mve-vabav-bad.s: New test.
* testsuite/gas/arm/mve-vmladav-bad.d: New test.
* testsuite/gas/arm/mve-vmladav-bad.l: New test.
* testsuite/gas/arm/mve-vmladav-bad.s: New test.
* testsuite/gas/arm/mve-vmlav-bad.d: New test.
* testsuite/gas/arm/mve-vmlav-bad.l: New test.
* testsuite/gas/arm/mve-vmlav-bad.s: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.d: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.l: New test.
* testsuite/gas/arm/mve-vmlsdav-bad.s: New test.
gas/ChangeLog:
2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_abs_neg): Make it accept MVE variant.
(insns): Change vabs and vneg entries to accept MVE variants.
* testsuite/gas/arm/mve-vabsneg-bad-1.d: New test.
* testsuite/gas/arm/mve-vabsneg-bad-1.l: New test.
* testsuite/gas/arm/mve-vabsneg-bad-1.s: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.d: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.l: New test.
* testsuite/gas/arm/mve-vabsneg-bad-2.s: New test.
Add a new machine dependent option to set a prefix for register names.
gas/
* config/tc-s12z.c (register_prefix): New variable. (md_show_usage,
md_parse_option): parse the new option.
(lex_reg_name): Scan the prefix if one is set.
* doc/c-s12z.texi (S12Z-Opts): Document the new option.
* testsuite/gas/s12z/reg-prefix.d: New file.
* testsuite/gas/s12z/reg-prefix.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
Release 6 of the MIPS architecture does not have an ADDI instruction.
ADD/SUB instructions with immediate operands can be expanded to load
and immediate value and then perform the operation.
gas/
* config/tc-mips.c (macro) <M_ADD_I, M_SUB_I, M_DADD_I, M_DSUB_I>:
Add expansions for MIPS r6.
* testsuite/gas/mips/add.s: Enable tests for R6.
* testsuite/gas/mips/daddi.s: Annotate to test DADD for R6.
* testsuite/gas/mips/mipsr6@add.d: Likewise.
* gas/testsuite/gas/mips/mipsr6@dadd.d: New test.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
opcodes/
* mips-opc.c (mips_opcodes): Enable ADD, SUB, DADD and DSUB
macros for R6.
opcodes/
* ppc-dis.c (skip_optional_operands): Change return type and returns.
(print_insn_powerpc) <skip_optional>: Change type.
Call skip_optional_operands if we have not skipped any operands.
gas/
* testsuite/gas/ppc/476.d: Update expected output.
* testsuite/gas/ppc/power6.d: Likewise.
My testcase matched against a file format of elf64-littleaarch64 in the
objdump output. This was unnecessarily restrictive and causes testcase
failures on aarch64_be.
Here we remove that restriction.
Committed as obvious.
Testing done on aarch64_be-none-elf gas to see the failure goes away.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/sve2.d: Remove file format restriction.
Add tests that SVE2 instructions are encoded as they should be, and
tests that invalid instructions have their problems reported.
Also check that each sve2 cryptographic extension is required to use the
corresponding cryptographic instructions.
Finally, test to ensure that sve2 instructions using mnemonics that
exist in sve1 still need the sve2 feature to be used.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/illegal-sve2-aes.d: New test.
* testsuite/gas/aarch64/illegal-sve2-bitperm.d: New test.
* testsuite/gas/aarch64/illegal-sve2-sha3.d: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2-sm4.d: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2-sve1ext.d: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2-sve1ext.l: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2.d: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2.l: Test new instructions.
* testsuite/gas/aarch64/illegal-sve2.s: Test new instructions.
* testsuite/gas/aarch64/sve1-extended-sve2.s: New test.
* testsuite/gas/aarch64/sve2.d: Test new instructions.
* testsuite/gas/aarch64/sve2.s: Test new instructions.
Make them work for tile, by using ".quad 0" as the simulated
instruction and doubling size of aligns. The larger aligns tripped
over riscv alignment handling, fixed by adding -mno-relax there.
Also disable link-relax for avr, pru and xtensa, allowing these
targets to pass these tests. With link-time relaxation enabled,
these targets emit alignment relocations rather than aligning at
assembly time. This means the assembler doesn't see a change in PC
when it is expected over an alignment frag and thus view numbers are
calculated incorrectly.
* testsuite/gas/elf/dwarf2-1.s,
* testsuite/gas/elf/dwarf2-2.s,
* testsuite/gas/elf/dwarf2-5.s,
* testsuite/gas/elf/dwarf2-7.s,
* testsuite/gas/elf/dwarf2-8.s,
* testsuite/gas/elf/dwarf2-9.s,
* testsuite/gas/elf/dwarf2-10.s,
* testsuite/gas/elf/dwarf2-11.s,
* testsuite/gas/elf/dwarf2-12.s,
* testsuite/gas/elf/dwarf2-13.s,
* testsuite/gas/elf/dwarf2-14.s,
* testsuite/gas/elf/dwarf2-15.s,
* testsuite/gas/elf/dwarf2-16.s,
* testsuite/gas/elf/dwarf2-17.s,
* testsuite/gas/elf/dwarf2-18.s,
* testsuite/gas/elf/dwarf2-19.s: Double size of align and simulated
instructions.
* testsuite/gas/elf/dwarf2-1.d,
* testsuite/gas/elf/dwarf2-2.d,
* testsuite/gas/elf/dwarf2-5.d,
* testsuite/gas/elf/dwarf2-7.d,
* testsuite/gas/elf/dwarf2-8.d,
* testsuite/gas/elf/dwarf2-9.d,
* testsuite/gas/elf/dwarf2-10.d,
* testsuite/gas/elf/dwarf2-11.d,
* testsuite/gas/elf/dwarf2-12.d,
* testsuite/gas/elf/dwarf2-13.d,
* testsuite/gas/elf/dwarf2-14.d,
* testsuite/gas/elf/dwarf2-15.d,
* testsuite/gas/elf/dwarf2-16.d,
* testsuite/gas/elf/dwarf2-17.d,
* testsuite/gas/elf/dwarf2-18.d,
* testsuite/gas/elf/dwarf2-19.d: Use xfail rather than notarget.
Remove avr, pru, tile, xtensa from xfails. Update expected output.
* testsuite/gas/elf/elf.exp: Sort targets.
(dump_opts): Pass {as -mno-relax} for riscv, {as -mno-link-relax}
for avr and pru, and {as --no-link-relax} for xtensa to dwarf tests.
* testsuite/gas/elf/section2.e-miwmmxt: Delete unused file.
Expressions that compute view numbers that aren't simplified early
enough to a constant end up being selected for representation as
complex relocations, enabled on mep-* targets.
It would be possible to recognize such expressions, that can resolve
to constants, but this problem was hit before, in preexisting tests,
so xfail the new hits similarly.
The new hits were caused by yesterday's patch to dwarf2dbg.c: views in
the beginning of subsections are now computed later, based on the
final views or previous subsections in the same section.
for gas/ChangeLog
* testsuite/gas/elf/dwarf2-18.d: Xfail mep-*.
* testsuite/gas/elf/dwarf2-19.d: Likewise.
Add paired load-link and store-conditional instructions to the
EVA ASE for MIPS32R6[1]. These instructions are optional within
the EVA ASE. Their presence is indicated by the XNP bit in the
Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 230-231, pp. 357-360.
gas/
* config/tc-mips.c (mips_set_ase): Handle ASE_EVA_R6.
(macro) <M_LLWPE_AB, M_SCWPE_AB>: New cases.
(mips_after_parse_args): Translate EVA to EVA_R6.
* testsuite/gas/mips/ase-errors-1.s: Add new instructions.
* testsuite/gas/mips/eva.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Check errors for
new instructions.
* testsuite/gas/mips/mipsr6@eva.d: Check new test cases.
include/
* opcode/mips.h (ASE_EVA_R6): New macro.
(M_LLWPE_AB, M_SCWPE_AB): New enum values.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Add ISA
argument and set ASE_EVA_R6 appropriately.
(set_default_mips_dis_options): Pass ISA to above.
(parse_mips_dis_option): Likewise.
* mips-opc.c (EVAR6): New macro.
(mips_builtin_opcodes): Add llwpe, scwpe.
Derived from patch authored by Andrew Bennett <andrew.bennett@imgtec.com>
GOT and PLT relocs shouldn't have their symbols replaced with a
section symbol plus added. Nor should the HIGHA TLS relocations,
which failed to be caught by the range test in ppc_fix_adjustable.
bfd/
* reloc.c (BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA),
(BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA):
Sort before BFD_RELOC_PPC64_DTPREL16_HIGHESTA entry.
gas/
* config/tc-ppc.c (ppc_fix_adjustable): Exclude all GOT and PLT
relocs, and VLE sdarel relocs.
* testsuite/gas/ppc/power4.d: Adjust.
Location views at borders between subsegments/subsections in the same
segment/section are computed as if each new subsegment/subsection
started with a forced view reset to zero, but the line number program
does not introduce resets that are not explicitly requested, so if a
subsegment ends at the same address another starts, the line number
program will have a continuity of views at the border address, whereas
the initial view number label in the latter subsegment will be
miscomputed as zero.
This patch delays the assignment of view expressions at subsegment
heads to the time of chaining the frags of subsegments into a single
segment, so that they are set based on the view at the end of the
previous subsegment in the same segment.
The line number program created for the test program had an
unnecessary DW_LNS_advance_pc at the end. This patch also arranges
for us not to emit it.
for gas/ChangeLog
* dwarf2dbg.c (set_or_check_view): Skip heads when assigning
views of prior locs.
(dwarf2_gen_line_info_1): Skip heads.
(size_inc_line_addr, emit_inc_line_addr): Drop
DW_LNS_advance_pc for zero addr delta.
(dwarf2_finish): Assign views for heads of segments.
* testsuite/gas/elf/dwarf2-19.d: New.
* testsuite/gas/elf/dwarf2-19.s: New.
* testsuite/gas/elf/elf.exp: Test it.
m32c_md_end attempted to pad out a code section with nops, but this
was just plain wrong in many ways:
- The padding didn't happen at all if the last section emitted wasn't
a code section.
- The padding went to the wrong place if subsections were used, and
the last subseg used wasn't the highest numbered subseg.
- Padding wasn't added to all code sections.
- If the last section was empty, it was padded to 4 bytes.
- The padding didn't go to a 4-byte alignment boundary, instead it
effectively made the last instruction 4 bytes in size.
- The padding didn't take into account that code sections may have
contents other than machine instructions.
So, rip it out and handle nop padding properly, also fixing .align
.balign/.p2align in the middle of code.
gas/
* config/tc-m32c.c (insn_size): Delete static var.
(md_begin): Don't set it.
(m32c_md_end): Delete.
(md_assemble): Add insn_size auto var.
* config/tc-m32c.h (md_end): Don't define.
(m32c_md_end): Delete.
(NOP_OPCODE, HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): Define.
* testsuite/gas/all/align.d: Remove m32c from notarget list.
* testsuite/gas/all/incbin.d: Likewise.
* testsuite/gas/elf/dwarf2-11.d: Likewise.
* testsuite/gas/macros/semi.d: Likewise.
* testsuite/gas/all/gas.exp (do_comment): Similarly.
ld/
* testsuite/ld-scripts/fill.d: Don't xfail m32c
* testsuite/ld-scripts/fill16.d: Likewise.
The .code16gcc directive to support 16-bit mode with 32-bit address.
For IRET without a suffix, generate 16-bit IRET with a warning to
return from an interrupt handler in 16-bit mode.
PR gas/24485
* config/tc-i386.c (process_suffix): Issue a warning to IRET
without a suffix for .code16gcc.
* testsuite/gas/i386/jump16.s: Add tests for iretX.
* testsuite/gas/i386/jump16.d: Updated.
* testsuite/gas/i386/jump16.e: New file.
This patch enables the new Transactional Memory Extension added recently
as part of Arm's new architecture technologies.
We introduce a new optional extension "tme" to enable this. The following
instructions are part of the extension:
* tstart <Xt>
* ttest <Xt>
* tcommit
* tcancel #<imm>
The ISA for the above can be found here:
https://developer.arm.com/docs/ddi0602/latest/base-instructions-alphabetic-order
*** gas/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_features): Add "tme".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/tme-invalid.d: New test.
* testsuite/gas/aarch64/tme-invalid.l: New test.
* testsuite/gas/aarch64/tme-invalid.s: New test.
* testsuite/gas/aarch64/tme.d: New test.
* testsuite/gas/aarch64/tme.s: New test.
*** include/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_TME): New.
(enum aarch64_opnd): Add AARCH64_OPND_TME_UIMM16.
*** opcodes/ChangeLog ***
2019-05-01 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_TME_UIMM16.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_IMM_NIL): New.
(TME): New.
(_TME_INSN): New.
(struct aarch64_opcode): Add tstart, tcommit, ttest and tcancel.
Add several baseline MIPS32R6[1] and MIPS64R6[2] instructions
that were omitted from the initial spec. These instructions
are optional in implementations but not associated with any
ASE or pseudo-ASE. Their presence is indicated by the XNP bit
in the Config5 register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 228-229, pp. 354-357.
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 289-290 and pp. 458-460.
gas/
* config/tc-mips.c (macro) <M_LLWP_AB, M_LLDP_AB, M_SCWP_AB,
M_SCDP_AB>: New cases and expansions for paired instructions.
* testsuite/gas/mips/llpscp-32.s: New test source.
* testsuite/gas/mips/llpscp-64.s: Likewise.
* testsuite/gas/mips/llpscp-32.d: New test.
* testsuite/gas/mips/llpscp-64.d: Likewise.
* testsuite/gas/mips/mips.exp: Run the new tests.
* testsuite/gas/mips/r6.s: Add new instructions to test source.
* testsuite/gas/mips/r6-64.s: Likewise.
* testsuite/gas/mips/r6-64-n32.d: Check new instructions.
* testsuite/gas/mips/r6-64-n64.d: Likewise.
* testsuite/gas/mips/r6-n32.d: Likewise.
* testsuite/gas/mips/r6-n64.d: Likwwise.
* testsuite/gas/mips/r6.d: Likewise.
include/
* opcode/mips.h (M_LLWP_AB, M_LLDP_AB): New enum values.
(M_SCWP_AB, M_SCDP_AB): Likewise.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add llwp, lldp, scwp, scdp.
The .code16gcc directive supports 16bit mode with 32-bit address. Since
IRET (opcode 0xcf) in 16bit mode returns from an interrupt in 16bit mode,
we shouldn't add 0x66 prefix for IRET.
PR gas/24485
* config/tc-i386.c (process_suffix): Don't add DATA_PREFIX_OPCODE
to IRET for .code16gcc.
* testsuite/gas/i386/jump16.s: Add IRET tests.
* testsuite/gas/i386/jump16.d: Updated.
In most cases we don't want expression symbols, such as that created
for an expression like "symbol + (1f - .)", resolved down to a
constant. Instead we'd like to leave the expression as "symbol +
constant" once the "1f - ." part has been resolved, and let the
backend decide whether "symbol" can be reduced further.
However, that doesn't work when trying to resolve .loc view symbols
early. We get expression symbols left as an O_symbol expression
pointing at an absolute symbol, and marked as sy_flags.sy_resolved.
That wouldn't really be a problem, but when one of those expression
symbols is used in further .loc view expressions, its value is taken
as zero.
This patch fixes the symbol value mistake, and stops creation of
O_symbol expression symbols pointing to absolute symbols. Either of
these fixes would cure the .loc view usage.
PR 24444
* symbols.c (resolve_symbol_value): When handling symbols
marked as sy_flags.resolved, return correct value for the
case of expression symbols left as an O_symbol expression.
Merge O_symbol code handling undefined and common symbols with
code handling special cases of expression symbols. Use
seg_left to test for undefined and common symbols. Don't
leave an O_symbol expression when X_add_symbol resolves to
the absolute_section. Init final_val later.
* testsuite/gas/mmix/basep-7.d: Adjust expected output.
gas * config/tc-msp430.c (msp430_make_init_symbols): Define
__crt0_run_{preinit,init,fini}_array symbols if
.{preinit,init,fini}_array sections exist.
* testsuite/gas/msp430/fini-array.d: New test.
* testsuite/gas/msp430/init-array.d: New test.
* testsuite/gas/msp430/preinit-array.d: New test.
* testsuite/gas/msp430/fini-array.s: New test source.
* testsuite/gas/msp430/init-array.s: New test source.
* testsuite/gas/msp430/preinit-array.s: New test source.
* testsuite/gas/msp430/msp430.exp: Add new tests to driver.
gas * config/tc-msp430.c (options): New OPTION_UNKNOWN_INTR_NOPS,
OPTION_NO_UNKNOWN_INTR_NOPS and do_unknown_interrupt_nops.
(md_parse_option): Handle OPTION_UNKNOWN_INTR_NOPS and
OPTION_NO_UNKNOWN_INTR_NOPS by setting do_unknown_interrupt_nops
accordingly.
(md_show_usage): Likewise.
(md_shortopts): Add "mu" for OPTION_UNKNOWN_INTR_NOPS and
"mU" for OPTION_NO_UNKNOWN_INTR_NOPS.
(md_longopts): Likewise.
(warn_eint_nop): Update comment.
(warn_unsure_interrupt): Don't warn if prev_insn_is_nop or
prev_insn_is_dint or we are assembling for 430 ISA.
(msp430_operands): Only call warn_unsure_interrupt if
do_unknown_interrupt_nops == TRUE.
* testsuite/gas/msp430/nop-unknown-intr.s: New test source file.
* testsuite/gas/msp430/nop-unknown-intr-430.d: New test.
* testsuite/gas/msp430/nop-unknown-intr-430x.d: New test.
* testsuite/gas/msp430/nop-unknown-intr-430x-ignore.d: New test.
* testsuite/gas/msp430/nop-unknown-intr-430.l: Warning output for new
test.
* testsuite/gas/msp430/nop-unknown-intr-430x.l: Likewise.
* testsuite/gas/msp430/msp430.exp: Add new tests to driver.
Some of these tests were excluded for ns32k-netbsd, exclude for all
ns32k instead.
binutils/
* testsuite/binutils-all/copy-2.d: Don't run for ns32k-*-*.
* testsuite/binutils-all/copy-3.d: Likewise.
gas/
* testsuite/gas/all/gas.exp: Remove ns32k xfails.
* testsuite/gas/all/weakref1u.d: Don't run for ns32k-*-*.
ld/
* testsuite/ld-scripts/pr20302.d: Don't run for ns32k-*-*.
* testsuite/ld-scripts/section-match-1.d: Likewise.
* testsuite/ld-undefined/require-defined.exp: Likewise.
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case.
Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg ().
A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match.
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal
relocation.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (parse_sys_vldr_vstr): New function.
(OP_VLDR): New enum operand_parse_code enumerator.
(parse_operands): Add logic for OP_VLDR.
(do_t_vldr_vstr_sysreg): New function.
(do_vldr_vstr): Likewise.
(insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode.
(md_apply_fix): Add bound check for VLDR and VSTR co-processor offset.
Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad
uses of VLDR and VSTR.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for
above bad uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and
VSTR valid uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the
above examples.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (coprocessor_opcodes): Document new %J and %K format
specifier. Add entries for VLDR and VSTR of system registers.
(print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in
coprocessor instructions on Armv8.1-M Mainline targets. Add handling
of %J and %K format specifier.
Like for CLRM, this patch aims to share as much logic with the similar looking VLDM/VSTM. This is achieved by adding 2 new enumerator values in enum reg_list_els for the single-precision and double-precision variants of VSCCLRM and extending parse_vfp_reg_list () to deal with these types.
These behave like the existing REGLIST_VFP_S and REGLIST_VFP_D types with extra logic to expect VPR as the last element in the register list.
The function is algo augmented with a new partial_match parameter to indicate if any register other than VPR had already been parsed in the register list so as to not try parsing the second variant if that's the case and return the right error message.
The rest of the patch is the usual encoding function, new disassembler table entries and format specifier and parsing, encoding and disassembling tests.
It is worth mentioning that the new entry in the disassembler table was added in the coprocessor-related table despite VSCCLRM always being available even in FPU-less configurations. The main reason for this is that VSCCLRM also match VLDMIA entry and must thus be tried first but coprocessor entries are tried before T32 entries. It also makes sense because it is in the same encoding space as coprocessor and VFP instructions and is thus the natural place for someone to look for this instruction.
Note: Both variants of VSCCLRM support D16-D31 registers but Armv8.1-M Mainline overall does not. I have thus decided not to implement support for these registers in order to keep the code simpler. It can always be added later if needed.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (arm_typed_reg_parse): Fix typo in comment.
(enum reg_list_els): New REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR
enumerators.
(parse_vfp_reg_list): Add new partial_match parameter. Set
*partial_match to TRUE if at least one element in the register list has
matched. Add support for REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR
register lists which expect VPR as last element in the list.
(s_arm_unwind_save_vfp_armv6): Adapt call to parse_vfp_reg_list to new
prototype.
(s_arm_unwind_save_vfp): Likewise.
(enum operand_parse_code): New OP_VRSDVLST enumerator.
(parse_operands): Adapt call to parse_vfp_reg_list to new prototype.
Handle new OP_VRSDVLST case.
(do_t_vscclrm): New function.
(insns): New entry for VSCCLRM instruction.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add invalid VSCCLRM
instructions.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error expectations
for above instructions.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add tests for VSCCLRM
instruction.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add expected disassembly
for above instructions.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (coprocessor_opcodes): Document new %C format control code.
Add new entries for VSCCLRM instruction.
(print_insn_coprocessor): Handle new %C format control code.
Given the similarity between LDM/STM and CLRM register lists, most of the changes in this patch aim at sharing code between those two sets of instruction. Sharing is achieved both in parsing and encoding of those instructions.
In terms of parsing, parse_reg_list () is extended to take a type that describe what type of instruction is being parsed. The reg_list_els used for parse_vfp_reg_list () is reused for the type and that function is added an assert for the new REGLIST_CLRM and REGLIST_RN enumerators.
parse_reg_list () is then taught to accept APSR and reject SP and PC when parsing for a CLRM instruction. At last, caller of parse_reg_list () is updated accordingly and logic is added for the new OP_CLRMLST operand.
Encoding-wise, encode_thumb2_ldmstm () is reused to encode the variable bits of CLRM and is thus renamed encode_thumb2_multi (). A new do_io parameter is added to distinguish between LDM/STM and CLRM which guard all the LDM/STM specific code of the function.
Finally objdump is told how to disassemble CLRM, again reusing the logic to print the LDM/STM register list (format specifier 'm'). Tests are also added in the form of negative tests to check parsing and encoding/disassembling tests.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (enum reg_list_els): Define earlier and add
REGLIST_RN and REGLIST_CLRM enumerators.
(parse_reg_list): Add etype parameter to distinguish between regular
core register list and CLRM register list. Add logic to
recognize CLRM register list.
(parse_vfp_reg_list): Assert type is not for core register list.
(s_arm_unwind_save_core): Update call to parse_reg_list to new
prototype.
(enum operand_parse_code): Declare OP_CLRMLST enumerator.
(parse_operands): Update call to parse_reg_list to new prototype. Add
logic for OP_CLRMLST.
(encode_thumb2_ldmstm): Rename into ...
(encode_thumb2_multi): This. Add do_io parameter. Add logic to
encode CLRM and guard LDM/STM only code by do_io.
(do_t_ldmstm): Adapt to use encode_thumb2_multi.
(do_t_push_pop): Likewise.
(do_t_clrm): New function.
(insns): Define CLRM.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.d: New file.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Likewise.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (thumb_opcodes): Document %n control code. Add entry for
CLRM.
(print_insn_thumb32): Add logic to print %n CLRM register list.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds support to the Scalar low overhead loop instructions:
LE
WLS
DLS
We also add a new assembler resolvable relocation bfd_reloc_code_real enum for the 12-bit branch offset used in these instructions.
ChangeLog entries are as follows:
*** bfd/ChnageLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_ARM_THUMB_LOOP12): New.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.
*** gas/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR
for the LR operand and optional LR operand.
(parse_operands): Add switch cases for OP_LR and OP_oLR for
both type checking and value checking.
(encode_thumb32_addr_mode): New entries for DLS, WLS and LE.
(v8_1_loop_reloc): New helper function for handling labels
for the low overhead loop instructions.
(do_t_loloop): New function to encode DLS, WLS and LE.
(insns): New entries for WLS, DLS and LE.
(md_pcrel_from_section): New switch case
for BFD_RELOC_ARM_THUMB_LOOP12.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-tloop.s: New.
* testsuite/gas/arm/armv8_1-m-tloop.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.s: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.l: New.
*** opcodes/ChangeLog ***
2019-04-12 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Updated to accept new %P
and %Q patterns.
s patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFCSEL instruction. It also adds a local relocation with a new bfd_reloc_code_real enum.
ChangeLog entries are as follows:
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* reloc.c (BFD_RELOC_THUMB_PCREL_BFCSEL): New relocation.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entriy for bfcsel.
(do_t_v8_1_branch): New switch case for bfcsel.
(toU): Define.
(insns): New instruction for bfcsel.
(md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BFCSEL.
(md_appdy_fix): Likewise
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-bfcsel.d: New.
* testsuite/gas/arm/armv8_1-m-bfcsel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfcsel.s: New.
* testsuite/ld-arm/bfcsel.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfcsel.
(print_insn_thumb32): Edit the switch case for %Z.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This patch adds the BFL instruction.
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entrie for bfl.
(do_t_v8_1_branch): New switch case for bfl.
(insns): New instruction for bfl.
* testsuite/gas/arm/armv8_1-m-bfl.d: New.
* testsuite/gas/arm/armv8_1-m-bfl.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bfl.s: New.
* testsuite/ld-arm/bfl.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instruction bfl.
This patch is part of a series of patches to add support for Armv8.1-M Mainline instructions to binutils.
This patch adds the BFX and BFLX instructions.
ChangeLog entries are as follows :
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bfx and bflx.
(do_t_v8_1_branch): New switch cases for bfx and bflx.
(insns): New instruction for bfx and bflx.
* testsuite/gas/arm/armv8_1-m-bf-exchange.d: New.
* testsuite/gas/arm/armv8_1-m-bf-exchange.s: New.
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.s: New
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.l: New
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.d: New
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (print_insn_thumb32): Add '%<bitfield>S' to print an
Arm register with r13 and r15 unpredictable.
(thumb32_opcodes): New instructions for bfx and bflx.
This patch is part of a series of patches to add support for Armv8.1-M Mainline
instructions to binutils.
This patch adds the BF instruction.
ChangeLog entries are as follows:
*** gas/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bf.
(do_t_branch_future): New.
(insns): New instruction for bf.
* testsuite/gas/arm/armv8_1-m-bf.d: New.
* testsuite/gas/arm/armv8_1-m-bf.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.s: New.
*** ld/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* testsuite/ld-arm/bf.s: New.
* testsuite/ld-arm/bf.d: New.
* testsuite/ld-arm/arm-elf.exp: Add above test.
*** opcodes/ChangeLog ***
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (thumb32_opcodes): New instructions for bf.
This patch implements the dsp, fp and fp.dp extensions for Armv8.1-M Mainline.
This patch also removes the fp-armv8 check from the half-precision move
instructions 'do_neon_movhf', as checking that the FP16 instructions extension
feature bit is enabled 'ARM_EXT2_FP16_INST' is enough.
gas/ChangeLog:
2019-04-15 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_movhf): Remove fp-armv8 check.
(armv8_1m_main_ext_table): New extension table.
(arm_archs): Use the new extension table.
* doc/c-arm.texi: Add missing arch and document new extensions.
* testsuite/gas/arm/armv8.1-m.main-fp.d: New.
* testsuite/gas/arm/armv8.1-m.main-fp-dp.d: New.
* testsuite/gas/arm/armv8.1-m.main-hp.d: New.
The patch is straightforward, it does the following:
- support the new Tag_CPU_arch build attribute value, ie.:
+ declare the new value
+ update all the asserts forcing logic to be reviewed for new
architectures
+ create a corresponding bfd_mach_arm_8_1M_MAIN enumerator in bfd and
add mapping from Tag_CPU_arch to it
+ teach readelf about new Tag_CPU_arch value
- declare armv8.1-m.main as a supported architecture value
- define Armv8.1-M Mainline in terms of feature bits available
- tell objdump mapping from bfd_mach_arm_8_1M_MAIN enumerator to feature
bits available
- update architecture-specific logic in gas and bfd guarded by the
asserts mentioned above.
- tests for all the above
ChangeLog entries are as follows:
*** bfd/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* archures.c (bfd_mach_arm_8_1M_MAIN): Define.
* bfd-in2.h: Regenerate.
* cpu-arm.c (arch_info_struct): Add entry for Armv8.1-M Mainline.
* elf32-arm.c (using_thumb_only): Return true for Armv8.1-M Mainline
and update assert.
(using_thumb2): Likewise.
(using_thumb2_bl): Update assert.
(arch_has_arm_nop): Likewise.
(bfd_arm_get_mach_from_attributes): Add case for Armv8.1-M Mainline.
(tag_cpu_arch_combine): Add logic for Armv8.1-M Mainline merging.
*** binutils/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_CPU_arch): Add entry for Armv8.1-M Mainline.
*** gas/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline
Tag_CPU_arch build attribute value. Reindent.
(get_aeabi_cpu_arch_from_fset): Update assert.
(aeabi_set_public_attributes): Update assert for Tag_DIV_use logic.
* testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test.
*** include/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf/arm.h (TAG_CPU_ARCH_V8_1M_MAIN): new macro.
(MAX_TAG_CPU_ARCH): Set value to above macro.
* opcode/arm.h (ARM_EXT2_V8_1M_MAIN): New macro.
(ARM_AEXT_V8_1M_MAIN): Likewise.
(ARM_AEXT2_V8_1M_MAIN): Likewise.
(ARM_ARCH_V8_1M_MAIN): Likewise.
*** ld/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* testsuite/ld-arm/attr-merge-13.attr: New test.
* testsuite/ld-arm/attr-merge-13a.s: New test.
* testsuite/ld-arm/attr-merge-13b.s: New test.
*** opcodes/ChangeLog ***
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-dis.c (select_arm_features): Add logic for Armv8.1-M Mainline.
gas/
* config/tc-mips.c (mips_cpu_info_table): Add i6500. Update
default ASEs for i6400.
* doc/c-mips.texi (-march): Document i6500.
* testsuite/gas/mips/elf_mach_i6400.d: New test.
* testsuite/gas/mips/elf_mach_i6500.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
GAS does not enable implicit ASEs for most MIPS processors.
The rework of option handling done as part of .module implementation
left the implicit ASE logic broken and default enabled ASEs for
most processors did not get applied. This patch ensures the ASE
information is carried forward to the point where it is required.
gas/
* config/tc-mips.c (mips_set_options) <init_ase>: New field.
(file_mips_opts, mips_opts) <init_ase>: Initialize new field.
(file_mips_check_options): Propagate initial ASE settings.
(mips_after_parse_args, parse_code_option): Track the initial
ASE settings for a CPU.
(s_mipsset): Restore the initial ASE settings when reverting
to the default arch.
* testsuite/gas/mips/elf_mach_p6600.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/gas/xtensa/loop-relax-2.d: New test definition.
* testsuite/gas/xtensa/loop-relax.d: New test definition.
* testsuite/gas/xtensa/loop-relax.s: New test source.
* testsuite/gas/xtensa/text-section-literals-1a.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-2.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-2.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-2a.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-3.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-3.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-4.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-4.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-4a.d: New test
definition.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/gas/xtensa/all.exp: Remove all expect-based
tests and all explicit run_dump_test / run_list_test
invocations. Add run_dump_tests for all .d files in the
test subdirectory.
* testsuite/gas/xtensa/entry_align.d: New test definition.
* testsuite/gas/xtensa/entry_align.l: New test output.
* testsuite/gas/xtensa/entry_misalign.d: New test definition.
* testsuite/gas/xtensa/entry_misalign2.d: New test definition.
* testsuite/gas/xtensa/j_too_far.d: New test definition.
* testsuite/gas/xtensa/j_too_far.l: New test output.
* testsuite/gas/xtensa/loop_align.d: New test definition.
* testsuite/gas/xtensa/loop_misalign.d: New test definition.
* testsuite/gas/xtensa/trampoline-2.d: New test definition.
* testsuite/gas/xtensa/trampoline-2.l: Remove empty output.
* testsuite/gas/xtensa/xtensa-err.exp: Use positive logic.
Provide literal position at the beginning of each section for literal
space reserved by relaxations when text-section-literals or
auto-litpools options are used. Remove code that adds fill frag to the
literal section for every .literal_position directive to avoid creation
of empty literal sections.
Fix auto-litpools tests that got literal pool address changes.
gas/
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_is_init_fini): Add declaration.
(xtensa_mark_literal_pool_location): Don't add fill frag to literal
section that records literal pool location.
(md_begin): Call xtensa_mark_literal_pool_location when text
section literals or auto litpools are used.
(xtensa_elf_section_change_hook): Call
xtensa_mark_literal_pool_location when text section literals or
auto litpools are used, there's no literal pool location defined
for the current section and it's not .init or .fini.
* testsuite/gas/xtensa/auto-litpools-first1.d: Fix up addresses.
* testsuite/gas/xtensa/auto-litpools-first2.d: Likewise.
* testsuite/gas/xtensa/auto-litpools.d: Likewise.
This patch updates the Store allocation tags instructions in
Armv8.5-A Memory Tagging Extension. This is part of the changes
that have been introduced recently in the 00bet10 release
All of these instructions have an updated register operand (Xt -> <Xt|SP>)
- STG <Xt|SP>, [<Xn|SP>, #<simm>]
- STG <Xt|SP>, [<Xn|SP>, #<simm>]!
- STG <Xt|SP>, [<Xn|SP>], #<simm>
- STZG <Xt|SP>, [<Xn|SP>, #<simm>]
- STZG <Xt|SP>, [<Xn|SP>, #<simm>]!
- STZG <Xt|SP>, [<Xn|SP>], #<simm>
- ST2G <Xt|SP>, [<Xn|SP>, #<simm>]
- ST2G <Xt|SP>, [<Xn|SP>, #<simm>]!
- ST2G <Xt|SP>, [<Xn|SP>], #<simm>
- STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]
- STZ2G <Xt|SP>, [<Xn|SP>, #<simm>]!
- STZ2G <Xt|SP>, [<Xn|SP>], #<simm>
In order to accept <Rt|SP> a new operand type Rt_SP is introduced which has
the same field as FLD_Rt but follows other semantics of Rn_SP.
*** gas/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (process_omitted_operand): Add case for
AARCH64_OPND_Rt_SP.
(parse_operands): Likewise.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Update tests.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** include/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_Rt_SP.
*** opcodes/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_print_operand): Add case for
AARCH64_OPND_Rt_SP.
(verify_constraints): Likewise.
* aarch64-tbl.h (QL_LDST_AT): Update to add SP qualifier.
(struct aarch64_opcode): Update stg, stzg, st2g, stz2g instructions
to accept Rt|SP as first operand.
(AARCH64_OPERANDS): Add new Rt_SP.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds the new LDGM/STGM instructions of the
Armv8.5-A Memory Tagging Extension. This is part of the changes
that have been introduced recently in the 00bet10 release
The instructions are as follows:
LDGM Xt, [<Xn|SP>]
STGM Xt, [<Xn|SP>]
*** gas/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for ldgm and stgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new ldgm and stgm.
The fix H.J. implemented for PR gas/22791 in the thread starting at
[PATCH] x86-64: Treat PC32 relocation with branch as PLT32
https://sourceware.org/ml/binutils/2018-02/msg00065.html
is causing problems on Solaris/x86. The native linker is strongly
preferred there, and there's no intention of implementing the linker
optimization he plans there. Besides, the kernel runtime linker,
otherwise has no need to deal with that reloc at all, and instead of
adding (possibly even more) workarounds with no benefit, it seems
appropriate to disable the R_X86_64_PLT32 generation as branch marker on
Solaris/x86 in the first place.
The patch itself is trivial, the only complication is adapting the
testsuite. Since I've found no way to have conditional sections in the
.d files, I've instead used the solution already found elsewhere of
having separate .d files for the affected tests in an i386/solaris
subdirectory and skipping the original ones.
Tested on amd64-pc-solaris2.11 and x86_64-pc-linux-gnu without
regressions.
* config/tc-i386.c (need_plt32_p) [TE_SOLARIS]: Return FALSE.
* testsuite/gas/i386/solaris/solaris.exp: New driver.
* testsuite/gas/i386/solaris/reloc64.d,
testsuite/gas/i386/solaris/x86-64-jump.d,
testsuite/gas/i386/solaris/x86-64-mpx-branch-1.d,
testsuite/gas/i386/solaris/x86-64-mpx-branch-2.d,
testsuite/gas/i386/solaris/x86-64-nop-3.d,
testsuite/gas/i386/solaris/x86-64-nop-4.d,
testsuite/gas/i386/solaris/x86-64-nop-5.d,
testsuite/gas/i386/solaris/x86-64-relax-2.d,
testsuite/gas/i386/solaris/x86-64-relax-3.d: New tests.
* testsuite/gas/i386/reloc64.d,
testsuite/gas/i386/x86-64-jump.d,
testsuite/gas/i386/x86-64-mpx-branch-1.d,
testsuite/gas/i386/x86-64-mpx-branch-2.d,
testsuite/gas/i386/x86-64-nop-3.d,
testsuite/gas/i386/x86-64-nop-4.d,
testsuite/gas/i386/x86-64-nop-5.d,
testsuite/gas/i386/x86-64-relax-2.d,
testsuite/gas/i386/x86-64-relax-3.d: Skip on *-*-solaris*.
In Release 6 of the MIPS architecture [1], instruction RDHWR supports
a 3rd operand to serve as the 3-bit select field for the hardware
register.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 332-334
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add RDHWR rt rd sel.
gas/
* testsuite/gas/mips/mips.exp: Run hwr-names test.
* testsuite/gas/mips/hwr-names.s: Add test cases for RDHWR with
the SEL field.
* testsuite/gas/mips/mipsr6@hwr-names.d: New file.
Adds a new test checking conditional branch BO values.
* testsuite/gas/ppc/bc.s,
* testsuite/gas/ppc/bcat.d,
* testsuite/gas/ppc/bcaterr.d,
* testsuite/gas/ppc/bcaterr.l,
* testsuite/gas/ppc/bcy.d,
* testsuite/gas/ppc/bcyerr.d,
* testsuite/gas/ppc/bcyerr.l: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
When an instruction has operands, the PowerPC disassembler prints
spaces after the opcode so as to line up operands. If the operands
are all optional and all default value, then no operands are printed,
leaving trailing spaces. This patch fixes that.
opcodes/
* ppc-dis.c (print_insn_powerpc): Delay printing spaces after
opcode until first operand is output.
gas/
* testsuite/gas/ppc/476.d: Remove trailing spaces.
* testsuite/gas/ppc/a2.d: Likewise.
* testsuite/gas/ppc/booke.d: Likewise.
* testsuite/gas/ppc/booke_xcoff.d: Likewise.
* testsuite/gas/ppc/e500.d: Likewise.
* testsuite/gas/ppc/e500mc.d: Likewise.
* testsuite/gas/ppc/e6500.d: Likewise.
* testsuite/gas/ppc/htm.d: Likewise.
* testsuite/gas/ppc/power6.d: Likewise.
* testsuite/gas/ppc/power8.d: Likewise.
* testsuite/gas/ppc/power9.d: Likewise.
* testsuite/gas/ppc/vle.d: Likewise.
ld/
* testsuite/ld-powerpc/tlsexe32.d: Remove trailing spaces.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
* testsuite/ld-powerpc/tlsopt5_32.d: Likewise.
This patch adds a new framework to add architecture sensitive extensions, like
GCC does. This patch also implements all architecture extensions currently
available in GCC.
This framework works as follows. To enable architecture sensitive extensions
for a particular architecture, that architecture must contain an ARM_ARCH_OPT2
entry in the 'arm_archs' table. All fields here are the same as previous, with
the addition of a new extra field at the end to <name> it's extension table.
This <name>, corresponds to a <name>_ext_table of type 'struct arm_ext_table'.
This struct can be filled with three types of entries:
ARM_ADD (string <ext>, arm_feature_set <enable_bits>), which means +<ext> will
enable <enable_bits>
ARM_REMOVE (string <ext>, arm_feature_set <disable_bits>), which means
+no<ext> will disable <disable_bits>
ARM_EXT (string <ext>, arm_feature_set <enable_bits>, arm_feature_set
<disable_bits>), which means +<ext> will enable <enable_bits> and +no<ext>
will disable <disable_bits> (this is to be used instead of adding an
ARM_ADD and ARM_REMOVE for the same <ext>)
This patch does not disable the use of the old extensions, even if some of them
are duplicated in the new tables. This is a "in-between-step" as we may want to
deprecate the old table of extensions in later patches. For now, GAS will first
look for the +<ext> or +no<ext> in the new table and if no entry is found it
will continue searching in the old table, following old behaviour. If only an
ARM_ADD or an ARM_REMOVE is defined for <ext> and +no<ext> or +<ext> resp. is
used then it also continues to search the old table for it.
A couple of caveats:
- This patch does not enable the use of these architecture extensions with the
'.arch_extension' directive. This is future work that I will tend to later.
- This patch does not enable the use of these architecture extensions with the
-mcpu option. This is future work that I will tend to later.
- This patch does not change the current behaviour when combining an
architecture extension and using -mfpu on the command-line. The current
behaviour of GAS is to stage the union of feature bits enabled by both -march
and -mfpu. GCC behaves differently here, so this is something we may want to
revisit on a later date.
"mtfsb0 4*cr7+lt" doesn't make all that much sense, but unfortunately
glibc uses just that instead of "mtfsb0 28" to clear the fpscr xe bit.
So for backwards compatibility accept cr field expressions when
assembling mtfsb operands, but disassemble to a plain number.
PR 24390
include/
* opcode/ppc.h (PPC_OPERAND_CR_REG): Comment.
opcodes/
* ppc-opc.c (BTF): Define.
(powerpc_opcodes): Use for mtfsb*.
* ppc-dis.c (print_insn_powerpc): Print fields with both
PPC_OPERAND_CR_REG and PPC_OPERAND_CR_BIT as a plain number.
gas/
* testsuite/gas/ppc/476.d: Update mtfsb*.
* testsuite/gas/ppc/a2.d: Likewise.
and tidy "forward" test. I've removed some checks in d30v
md_apply_fix that have no business being there. Any symbol problems
will be caught later in tc_gen_reloc, and overflow checking is done in
gas/write.c.
* config/tc-d10v.c (md_apply_fix): Apply BFD_RELOC_8.
* config/tc-pdp11.c (md_apply_fix): Likewise.
* config/tc-d30v.c (md_apply_fix): Don't emit errors for BFD_RELOC_8,
BFD_RELOC_16, and BFD_RELOC_64.
* testsuite/gas/all/gas.exp: Move target exclusions for forward
test, but not cr16, to..
* testsuite/gas/all/forward.d: ..here, with explanation. Remove
d10v, d30v, and pdp11 xfails.
Update EVEX vector load/store optimization:
1. There is no need to check AVX since AVX2 is required for AVX512F.
2. We need to check both operands for ZMM register since AT&T syntax
may not set zmmword on the first operand.
3. Update Opcode_SIMD_IntD check and set.
4. Since the VEX prefix has 2 or 3 bytes, the EVEX prefix has 4 bytes,
EVEX Disp8 has 1 byte and VEX Disp32 has 4 bytes, we choose EVEX Disp8
over VEX Disp32.
* config/tc-i386.c (optimize_encoding): Don't check AVX for
EVEX vector load/store optimization. Check both operands for
ZMM register. Update EVEX vector load/store opcode check.
Choose EVEX Disp8 over VEX Disp32.
* testsuite/gas/i386/optimize-1.d: Updated.
* testsuite/gas/i386/optimize-1a.d: Likewise.
* testsuite/gas/i386/optimize-2.d: Likewise.
* testsuite/gas/i386/optimize-4.d: Likewise.
* testsuite/gas/i386/optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2b.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-3.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.d: Likewise.
* testsuite/gas/i386/optimize-1.s: Add ZMM register load
test.
* testsuite/gas/i386/x86-64-optimize-2.s: Likewise.
Since not all AVX512F processors support AVX512VL, we can optimize
512-bit EVEX to 128-bit EVEX encoding for upper 16 vector registers
only when AVX512VL is enabled explicitly at command-line or via
".arch .avx512vl" directive.
PR gas/24352
* config/tc-i386.c (optimize_encoding): Check only
cpu_arch_flags.bitfield.cpuavx512vl.
* testsuite/gas/i386/i386.exp: Run x86-64-optimize-2b.
* testsuite/gas/i386/x86-64-optimize-2.d: Revert the last
change.
* testsuite/gas/i386/x86-64-optimize-2b.d: New file.
* testsuite/gas/i386/x86-64-optimize-2b.s: Likewise.
Since all AVX512 processors support AVX, we can encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX vector
register clearing instructions at -O1.
* config/tc-i386.c (optimize_encoding): Encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX
vector register clearing instructions at -O1.
* doc/c-i386.texi: Update -O1 and -O2 documentation.
* testsuite/gas/i386/i386.exp: Run optimize-1a and
x86-64-optimize-2a.
* testsuite/gas/i386/optimize-1a.d: New file.
* testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
Set optimize to INT_MAX, instead of -1, for -Os so that -Os will include
-O2 optimization.
PR gas/24353
* config/tc-i386.c (md_parse_option): Set optimize to INT_MAX
for -Os.
* testsuite/gas/i386/optimize-2.s: Add a test.
* testsuite/gas/i386/x86-64-optimize-3.s: Likewise.
* testsuite/gas/i386/optimize-2.d: Updated.
* testsuite/gas/i386/x86-64-optimize-3.d: Likewise.
We can optimize 512-bit EVEX to 128-bit EVEX encoding for upper 16
vector registers only when AVX512VL is enabled. We can't optimize
EVEX to 128-bit VEX encoding when AVX isn't enabled.
PR gas/24352
* config/tc-i386.c (optimize_encoding): Encode 512-bit EVEX
with 128-bit VEX encoding only when AVX is enabled and with
128-bit EVEX encoding only when AVX512VL is enabled.
* testsuite/gas/i386/i386.exp: Run PR gas/24352 tests.
* testsuite/gas/i386/optimize-6.s: New file.
* testsuite/gas/i386/optimize-6a.d: Likewise.
* testsuite/gas/i386/optimize-6b.d: Likewise.
* testsuite/gas/i386/optimize-6c.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-7a.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7b.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7c.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.d: Updated.
Committed on behalf of Matthew Malcomson.
This allows checking the command line parsing more easily than before by
allowing many command line invokations from the same .d file.
Each line is used as a set of flags, and the tests are ran against the output
of the assembler with each set.
Each line of assembler is treated as another set of tests (as if the test file
were copied to another with a different #as: line).
This patch includes some example uses where multiple testcases can be merged
into one file using this new functionality.
binutils/ChangeLog:
* testsuite/lib/binutils-common.exp: Allow multiple "as" lines.
gas/ChangeLog:
* testsuite/gas/aarch64/dotproduct.d: Use multiple "as" lines.
* testsuite/gas/aarch64/dotproduct_armv8_4.d: Remove.
* testsuite/gas/aarch64/dotproduct_armv8_4.s: Remove.
* testsuite/gas/aarch64/illegal-dotproduct.d: Use multiple "as"
lines.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: Remove.
* testsuite/gas/aarch64/ldst-rcpc.d: Use multiple "as" lines.
The software trap instruction HLT that was introduced in Armv8-a is used
as the semihosting trap instruction in AArch64. In order to allow systems
configured to run AArch64 code to also run AArch32 with semihosting it was
decided that AArch32 should also use HLT in the case of the "mixed mode"
environment. This requires that HLT also be backported to all earlier
architectures. The instruction is in the undefined encoding space earlier
architectures but must trigger a semihosting trap [3].
The Arm Architectural Reference Manual [1] doesn't explicitly mention this
however this is an explicit requirement in the Semihosting-v2 protocol [2].
[1] https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile
[2] https://developer.arm.com/docs/100863/latest/the-semihosting-interface
[3] 19a6e31c9d
gas/ChangeLog:
* config/tc-arm.c (insns): Redefine THUMB_VARIANT and ARM_VARIANT for
hlt to armv1.
* testsuite/gas/arm/armv8a-automatic-hlt.d: Update TAGs
* testsuite/gas/arm/hlt.d: New test.
* testsuite/gas/arm/hlt.s: New test.
opcodes/ChangeLog:
* arm-dis.c (arm_opcodes): Redefine hlt to armv1.
This patch just adds a few negative tests for the Armv8.3-a complex instructions.
These already do the right disassembly without needing a verifier, but adding
some tests to make sure that stays that way.
gas/ChangeLog:
* testsuite/gas/aarch64/undefined_advsimd_armv8_3.d: New test.
* testsuite/gas/aarch64/undefined_advsimd_armv8_3.s: New test.
The AArch64 instruction set has cut-outs inside instructions encodings for
when a given encoding that would normally fall within the encoding space of
an instruction is instead undefined.
This updates the first few instructions FMLA, FMLA, FMUL and FMULX in the case
where sz:L == 11.
gas/ChangeLog:
PR binutils/23212
* testsuite/gas/aarch64/undefined_by_elem_sz_l.s: New test.
* testsuite/gas/aarch64/undefined_by_elem_sz_l.d: New test.
opcodes/ChangeLog:
PR binutils/23212
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz.
* aarch64-opc.c (verify_elem_sd): New.
(fields): Add FLD_sz entr.
* aarch64-tbl.h (_SIMD_INSN): New.
(aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and
fmulx scalar and vector by element isns.
This is done in order to avoid a pipeline hazard on the GR6.
gas/
* config/tc-visium.c (md_assemble) <mode_cad>: Align instruction
on 64-bit boundaries for the GR6.
* testsuite/gas/visium/allinsn_gr6.s: Tweak.
* testsuite/gas/visium/allinsn_gr6.d: Likewise.
* testsuite/gas/visium/bra-1.d: New test.
* testsuite/gas/visium/bra-1.s: Likewise.
* testsuite/gas/visium/visium.exp: Run bra-1 test.
mov.l, mov.p and mov.w (but not mov.b) when called with an immediate source
operand should be accepted a relocatable expression. This change makes that
possible.
gas/
* config/tc-s12z.c (lex_imm): Add new argument exp_o.
(emit_reloc): New function.
(md_apply_fix): [BFD_RELOC_S12Z_OPR] Recognise that it
can be either 2 bytes or 3 bytes long.
* testsuite/gas/s12z/mov-imm-reloc.d: New file.
* testsuite/gas/s12z/mov-imm-reloc.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
The limits for PC relative offsets were incorrect. This change fixes
them and adds some tests.
gas/
* config/tc-s12z.c (md_apply_fix): Fix incorrect limits.
* testsuite/gas/s12z/pc-rel-bad.d: New file.
* testsuite/gas/s12z/pc-rel-bad.l: New file.
* testsuite/gas/s12z/pc-rel-bad.s: New file.
* testsuite/gas/s12z/pc-rel-good.d: New file.
* testsuite/gas/s12z/pc-rel-good.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
It is permissible for the source and destination operands of TFR and EXG to be
the same register. However it is a pointless instruction and anyone writing it
has probably made a mistake. This change emits a warning if such an instruction
is encountered.
gas/
* config/tc-s12z.c (tfr): Emit warning if operands are the same.
* testsuite/gas/s12z/exg.d: New test case.
* testsuite/gas/s12z/exg.l: New file.
The assembler permitted instructions which attempted to assign to an immediate
operand. Bizarrely there is a valid machine code for such operations (although
the documentation says it's "inappropriate"). This change causes such attempts
to fail with an error message.
gas/
* config/tc-s12z.c (lex_opr): Add a parameter to indicate whether
immediate mode operands should be permitted.
* testsuite/s12z/imm-dest.d: New file.
* testsuite/s12z/imm-dest.l: New file.
* testsuite/s12z/imm-dest.s: New file.
* testsuite/s12z/s12z.exp: Add them.
opcodes/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* s390-mkopc.c (main): Accept arch13 as cpu string.
* s390-opc.c: Add new instruction formats and instruction opcode
masks.
* s390-opc.txt: Add new arch13 instructions.
include/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): Add
S390_OPCODE_ARCH13.
gas/ChangeLog:
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch13.
* doc/c-s390.texi: Document arch13 march option.
* testsuite/gas/s390/s390.exp: Run the arch13 related tests.
* testsuite/gas/s390/zarch-arch13.d: New test.
* testsuite/gas/s390/zarch-arch13.s: New test.
* testsuite/gas/s390/zarch-z13.d: Expect the renamed mnemonics
also for z13.
xtensa gas chokes on 8/16 bit data entries representing constant symbols
because it leaves BFD_RELOC_8/BFD_RELOC_16 fixups for which xtensa BFD
cannot emit relocations. Resolve fixups for constant symbols in
md_apply_fix.
gas/
2019-01-28 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (md_apply_fix): Mark fixups for constant
symbols as done in md_apply_fix.
* testsuite/gas/all/forward.d: Don't XFAIL for xtensa.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch updates the st*g instructions
to use a previously reserved field for a new register operand. Thus the
new versions of the instructions are as follows:
- STG Xt, [<Xn|SP>, #<simm>]
- STG Xt, [<Xn|SP>, #<simm>]!
- STG Xt, [<Xn|SP>], #<simm>
- STZG Xt, [<Xn|SP>, #<simm>]
- STZG Xt, [<Xn|SP>, #<simm>]!
- STZG Xt, [<Xn|SP>], #<simm>
- ST2G Xt, [<Xn|SP>, #<simm>]
- ST2G Xt, [<Xn|SP>, #<simm>]!
- ST2G Xt, [<Xn|SP>], #<simm>
- STZ2G Xt, [<Xn|SP>, #<simm>]
- STZ2G Xt, [<Xn|SP>, #<simm>]!
- STZ2G Xt, [<Xn|SP>], #<simm>
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (warn_unpredictable_ldst): Exempt
stg, st2g, stzg and stz2g from Xt == Xn with writeback warning.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Change tests for
stg, stzg, st2g and stz2g.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
* aarch64-tbl.h (QL_LDST_AT): Update macro.
(aarch64_opcode): Change encoding for stg, stzg
st2g and st2zg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch adds the new STZGM instruction.
STGZM Xt, [<Xn|SP>]
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for stzgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** opcodes/ChangeLog ***
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-tbl.h (aarch64_opcode): Add new stzgm.
This patch is part of a series of patches to introduce a few changes to the
Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV
instructions. These instructions needed special infrastructure to support
[base]! style for addressing mode. That is also removed now.
Committed on behalf of Sudakshina Das.
*** gas/ChangeLog ***
* config/tc-aarch64.c (parse_address_main): Remove support for
[base]! address expression.
(parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2.
(warn_unpredictable_ldst): Remove support for ldstgv_indexed.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv
and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
*** include/ChangeLog ***
* opcode/aarch64.h (enum aarch64_opnd): Remove
AARCH64_OPND_ADDR_SIMPLE_2.
(enum aarch64_insn_class): Remove ldstgv_indexed.
*** opcodes/ChangeLog ***
* aarch64-asm.c (aarch64_ins_addr_simple_2): Remove.
* aarch64-asm.h (ins_addr_simple_2): Likeiwse.
* aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise.
* aarch64-dis.h (ext_addr_simple_2): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): Remove
case for ldstgv_indexed.
(aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv.
(AARCH64_OPERANDS): Remove ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
The PE targets don't support mapping symbols and so the disassembler is unable
to correctly output thumb instructions when the input was thumb.
So for testcases that only have thumb output, I have copied them and skipped the
ones for which auto-detection is supposed to work on PE, and added a new one
that will force thumb output. This so that the tests still check the mapping
symbols.
For the tests that switch between thumb and arm in one file I just skip them
entirely on PE targets.
This cleans up the PE GAS testsuite.
gas/
* testsuite/gas/arm/archv6t2-1-pe.d: New test.
* testsuite/gas/arm/archv6t2-1.d: Skip pe.
* testsuite/gas/arm/csdb.d: Skip pe.
* testsuite/gas/arm/sb-thumb1-pe.d: New test.
* testsuite/gas/arm/sb-thumb1.d: Skip pe.
* testsuite/gas/arm/sb-thumb2-pe.d: New test.
* testsuite/gas/arm/sb-thumb2.d: Skip pe.
* testsuite/gas/arm/udf.d: Skip pe.
2019-01-16 Kito Cheng <kito@andestech.com>
bfd/
* elf-attrs.c (vendor_obj_attr_size): Return 0 if size is 0 even
for OBJ_ATTR_PROC.
gas/
* testsuite/gas/riscv/attribute-empty.d: New.
The assembler incorrectly recognised "c" as a register name, and
refused to allow it where it expected a symbol/label.
gas/
* config/tc-s12z.c (lex_reg_name): Compare the length of the strings
before the contents.
* testsuite/gas/s12z/labels.d: New file.
* testsuite/gas/s12z/labels.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
gas/
* testsuite/gas/s12z/jsr.s: New case.
* testsuite/gas/s12z/jsr.d: New case.
opcodes/
* s12z-dis.c (opr_emit_disassembly): Do not omit an index if it is
zero.
For PLT expressions, we should subtract the PLT relocation size only for
jump instructions. Since PLT relocations are PC relative, we only allow
"symbol@PLT" in PLT expression.
gas/
PR gas/23997
* config/tc-i386.c (x86_cons): Check for invalid PLT expression.
(md_apply_fix): Subtract the PLT relocation size only for jump
instructions.
* testsuite/gas/i386/reloc32.s: Add test for invalid PLT
expression.
* testsuite/gas/i386/reloc64.s: Likewise.
* testsuite/gas/i386/ilp32/reloc64.s: Likewise.
* testsuite/gas/i386/reloc32.l: Updated.
* testsuite/gas/i386/reloc64.l: Likewise.
* testsuite/gas/i386/ilp32/reloc64.l: Likewise.
ld/
PR gas/23997
* testsuite/ld-i386/i386.exp: Run PR gas/23997 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr23997a.s: New file.
* testsuite/ld-x86-64/pr23997b.c: Likewise.
* testsuite/ld-x86-64/pr23997c.c: Likewise.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
gas/
PR gas/23954
* config/tc-riscv.c (my_getSmallExpression): Expand comment for
register support. Set expr_end if parse a register.
(riscv_ip) <'u'>: Break if imm_expr is not a symbol or constant.
* testsuite/gas/riscv/auipc-parsing.d: New.
* testsuite/gas/riscv/auipc-parsing.l: New.
* testsuite/gas/riscv/auipc-parsing.s: New.
Put back BFD_RELOC_X86_64_GOTPCREL in TC_FORCE_RELOCATION_LOCAL, which
was removed by
commit 56ceb5b540
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Thu Oct 22 04:49:20 2015 -0700
Add R_X86_64_[REX_]GOTPCRELX support to gas and ld
by accident.
PR gas/23956
gas/
* config/tc-riscv.c (validate_riscv_insn) <'1'>: New case.
(percent_op_null): New.
(riscv_ip) <'j'>: Set imm_reloc before p.
<'1'>: New case.
<'0'>: Use percent_op_null and don't set imm_reloc.
<alu_op>: Handle *args == '1'.
* testsuite/gas/riscv/tprel-add.d: New.
* testsuite/gas/riscv/tprel-add.l: New.
* testsuite/gas/riscv/tprel-add.s: New.
opcodes/
* riscv-opc.c (riscv_opcodes) <"add">: Use 1 not 0 for fourth arg.
Armv8.3-A has another key used in pointer authentication called the
B-key (other than the A-key that is already supported). In order for
stack unwinders to work it is necessary to be able to identify frames
that have been signed with the B-key rather than the A-key and it was
felt that keeping this as an augmentation character in the CIE was the
best bet. The DWARF extensions for ARM therefore propose to add a new
augmentation character 'B' to the CIE augmentation string and the
corresponding cfi directive ".cfi_b_key_frame". I've made the relevant
changes to GAS and LD to add support for B-key unwinding, which required
modifying LD to check for 'B' in the augmentation string, adding the
".cfi_b_key_frame" directive to GAS and adding a "pauth_key" field to
GAS's fde_entry and cie_entry structs.
The pointer authentication instructions will behave as NOPs on
architectures that don't support them, and so a check for the
architecture being assembled for is not necessary since there will be no
behavioural difference between augmentation strings with and without the
'B' character on such architectures.
2018-12-05 Sam Tebbs <sam.tebbs@arm.com>
bfd/
* elf-eh-frame.c (_bfd_elf_parse_eh_frame): Add check for 'B'.
gas/
* dw2gencfi.c (struct cie_entry): Add tc_cie_entry_extras invocation.
(alloc_fde_entry): Add tc_fde_entry_init_extra invocation.
(output_cie): Add tc_output_cie_extra invocation.
(select_cie_for_fde): Add tc_cie_fde_equivalent_extra and
tc_cie_entry_init_extra invocation.
(frch_cfi_data, cfa_save_data): Move to dwgencfi.h.
* config/tc-aarch64.c (s_aarch64_cfi_b_key_frame): Declare.
(md_pseudo_table): Add "cfi_b_key_frame".
* config/tc-aarch64.h (tc_fde_entry_extras, tc_cie_entry_extras,
tc_fde_entry_init_extra, tc_output_cie_extra,
tc_cie_fde_equivalent_extra, tc_cie_entry_init_extra): Define.
* dw2gencfi.h (struct fde_entry): Add tc_fde_entry_extras invocation.
(pointer_auth_key): Define.
(frch_cfi_data, cfa_save_data): Move from dwgencfi.c.
* doc/c-aarch64.texi (.cfi_b_key_frame): Add documentation.
* testsuite/gas/aarch64/(pac_ab_key.d, pac_ab_key.s): New file.
ARM Architecture Reference Manual for the profile ARMv8-A, Issue C.a,
states that MOV (register) is an alias of the ORR (shifted register)
iff shift == '00' && imm6 == '000000' && Rn == '11111'. However, mov
is currently preferred for a broader range of orr instructions, which
is incorrect.
2018-12-03 Egeyar Bagcioglu <egeyar.bagcioglu@oracle.com>
opcodes:
PR 23193
PR 19721
* aarch64-tbl.h (aarch64_opcode_table): Only disassemble an ORR
encoding as MOV if the shift operation is a left shift of zero.
gas:
PR 23193
PR 19721
* testsuite/gas/aarch64/pr19721.s: Add new test cases.
* testsuite/gas/aarch64/pr19721.d: Correct existing test
cases and add new ones.
This removes ineffectual and wrong code caching section names in
gas/stabs.c. Code like
seg = subseg_new (name, 0);
...
if (seg->name == name)
seg->name = xstrdup (name);
with the idea of being able to unconditionally free "name" later no
longer works. "name" is referenced by the section hash table as well
as in the section->name field. It would be possible to use
"bfd_rename_section (stdoutput, seg, xstrdup (name))", but instead I
opted for a fairly straight-forward approach of adding extra
parameters to two functions to indicate section name strings should be
freed if possible.
PR 23938
* read.h (get_stab_string_offset): Update prototype.
* stabs.c (get_stab_string_offset): Add free_stabstr_secname
parameter. Free stabstr_secname if unused as section name.
Don't xstrdup name when used.
(s_stab_generic): Remove forward declaration. Add
stab_secname_obstack_end param. Reference notes obstack via
macros. Delete cached_secname. Adjust get_stab_string_offset
call. Free stab_secname if unused as section name.
(s_stab): Adjust s_stab_generic call.
(s_xstab): Likewise. Delete saved_secname and saved_strsecname.
* config/obj-elf.c (obj_elf_init_stab_section): Adjust
get_stab_string_offset call.
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
* config/obj-som.c (obj_som_init_stab_section): Likewise.
* testsuite/gas/all/pr23938.s: New test.
* testsuite/gas/all/gas.exp: Run it.
`-march=r5900' already enables the R5900 short loop workaround.
However, the R5900 ISA and most other MIPS ISAs are mutually
exclusive since R5900-specific instructions are generated as well.
The `-mfix-r5900' option can be used in combination with e.g.
`-mips2' or `-mips3' to generate generic MIPS binaries that also
work with the R5900 target.
This change has been tested with `make RUNTESTFLAGS=mips.exp
check-gas' for the targets `mipsr5900el-unknown-linux-gnu',
`mipsr5900el-elf' and `mips3-unknown-linux-gnu'.
gas/
* config/tc-mips.c (mips_fix_r5900, mips_fix_r5900_explicit):
New variables.
(options): Add OPTION_FIX_R5900 and OPTION_NO_FIX_R5900
enumeration constants.
(md_longopts): Add "mfix-r5900" and "mno-fix-r5900" options.
(can_swap_branch_p, md_parse_option, mips_after_parse_args):
Handle the new options.
(md_show_usage): Document the `-mfix-r5900' option.
* doc/as.texi: Likewise.
* doc/c-mips.texi: Likewise.
* testsuite/gas/mips/mips.exp: Run R5900 dump tests.
* testsuite/gas/mips/r5900-fix.d: Test `-mfix-r5900' option.
* testsuite/gas/mips/r5900-fix.s: Likewise.
* testsuite/gas/mips/r5900-no-fix.d: Test `-mno-fix-r5900'.
* testsuite/gas/mips/r5900-no-fix.s: Likewise.
Shift and rotate instructions when the number of bit positions
was an immediate value greater than 1 were incorrectly disassembled.
This change fixes that problem and extends the test to check for
it.
gas/ChangeLog:
testsuite/gas/s12z/shift.s: Add new test case.
testsuite/gas/s12z/shift.d: Add expected result.
opcodes/ChangeLog:
s12z-dis.c (print_insn_shift) [SB_REG_REG_N]: Enter special case
if the postbyte matches the appropriate pattern.
These are documented by NXP as alternative mnemonics for BCC and BCS
respectively.
gas/ChangeLog:
* config/tc-s12z.c (opcodes): bhs, blo: New members.
* testsuite/gas/s12z/bra.d: Add tests for aliases.
* testsuite/gas/s12z/bra.s: Add tests for aliases.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds all the data cache instructions that are part of this
extension:
- DC IGVAC, Xt
- DC IGSW, Xt
- DC CGSW, Xt
- DC CIGSW, Xt
- DC CGVAC, Xt
- DC CGVAP, Xt
- DC CGVADP, Xt
- DC CIGVAC, Xt
- DC GVA, Xt
- DC IGDVAC, Xt
- DC IGDSW, Xt
- DC CGDSW, Xt
- DC CIGDSW, Xt
- DC CGDVAC, Xt
- DC CGDVAP, Xt
- DC CGDVADP, Xt
- DC CIGDVAC, Xt
- DC GZVA, Xt
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): New entries for
IGVAC, IGSW, CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA.
(aarch64_sys_ins_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test IGVAC, IGSW,
CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA with DC.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds all the system registers that are part of this
extension and are accessible via the MRS/MSR instructions:
- TCO
- TFSRE0_SL1
- TFSR_EL1
- TFSR_EL2
- TFSR_EL3
- TFSR_EL12
- RGSR_EL1
- GCR_EL1
TCO is also accessible with the MSR(immediate) instruction.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for TCO,
TFSRE0_SL1, TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12,
RGSR_EL1 and GCR_EL1.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for TCO.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test TCO, TFSRE0_SL1,
TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12, RGSR_EL1 and
GCR_EL1 MSR and MRS.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!
This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag Getting instruction from Memory Tagging
Extension.
- LDG <Xt>, [<Xn|SP>, #<simm>]
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range of -4096 and 4080, defaulting to 0.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (QL_LDG): New.
(aarch64_opcode_table): Add ldg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldg.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>
where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Pointer Arithmetic instructions from
MTE. These are the following instructions added in this patch:
- SUBP <Xd>, <Xn|SP>, <Xm|SP>
- SUBPS <Xd>, <Xn|SP>, <Xm|SP>
- CMPP <Xn|SP>, <Xm|SP>
where CMPP is an alias to SUBPS XZR, <Xn|SP>, <Xm|SP>
where
<Xd> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<Xm|SP> : Is the 64-bit second source GPR or Stack pointer.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_opcode_table): Add subp, subps and cmpp.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for subp,
subps and cmpp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>
where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.
Instructions having an optional argument following a memory address
operand were not handled correctly if the optional argument was not
specified.
gas/ChangeLog:
2018-11-09 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (skip_optargs_p): New function.
(md_gather_operands): Use skip_optargs_p.
* testsuite/gas/s390/s390.exp: Run the new test.
* testsuite/gas/s390/zarch-optargs.d: New test.
* testsuite/gas/s390/zarch-optargs.s: New test.
The PE target can insert NOP's for padding to 4 byte alignment.
This was causing a testcase failure, this commit fixes the testcase.
This commit also escapes some full-stops in the testcase regexp.
2018-11-06 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/arm/neon-cond-bad_t2.d: Fix testcase for PE
target.
VCVT between f16 and f32 is an Advanced SIMD instruction.
Not all the VCVT alternatives need neon, hence the check for neon is in
the encode function.
The check on neon for VCVT.f16.f32 (and vice versa) is missing.
vshcmd: > echo 'vcvt.f16.f32 d1, q1' | gas/as-new -mfpu=vfpxd -march=armv8.5-a -
testdir [15:59:10] $
Also, the handling of the condition code behaves differently to other
SIMD instructions -- no error message is produced when assembling an
instruction with a condition code suffix despite the arm encoding not
allowing a condition code. (n.b. the actual binary produced is
independent of the suffix).
The instruction should be treated similarly to VSUBL that has the same
caveat of "must be unconditional" describing the {<c>} symbol. vcvt
half-precision to single precision found in F6.1.58 in the ARM
Architecture Reference Manual issue C.a, vsubl found in F6.1.240 in
the ARM Architecture Reference Manual issue C.a
2018-11-06 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (do_neon_cvt_1): Add check for neon and condition
codes to half-precision conversion.
* testsuite/gas/arm/neon-cond-bad-inc.s: Check vcvteq disallowed.
* testsuite/gas/arm/neon-cond-bad.l: Likewise.
* testsuite/gas/arm/neon-cond-bad_t2.d: Check vcvteq allowed in IT
block.
* testsuite/gas/arm/vfp-bad.l: Ensure vcvt doesn't work without neon.
* testsuite/gas/arm/vfp-bad.s: Likewise.
Matthew Malcomson
Jan Beulich
H.J. Lu
Mihail Ionescu
Delia Burduv
Nick Clifton
Jozef Lawrynowicz
Tamar Christina
Srinath Parvathaneni
Kito Cheng
Dennis Zhang
Bosco Garc?a
Barnaby Wilks
Kyrylo Tkachov
Faraz Shahbazker
Yoshinori Sato
Jim Wilson
Claudiu Zissulescu
Alan Modra
Jose E. Marchesi
Richard Sandiford
Jan Beulich
Peter Bergner
Szabolcs Nagy
John Darrington
Sudakshina Das
Andre Vieira
Alexandre Oliva
Andrew Bennett
Matthew Fortune
Matthew Fortune
Max Filippov
Rainer Orth
Robert Suchanek
Xuepeng Guo
Peter Bergner
Andreas Krebbel
Eric Botcazou
Sam Tebbs
Egeyar Bagcioglu
Fredrik Noring
Thomas Preud'homme